Scooters

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Safe power supply, efficient and stable output, fast heat dissipation2. Using high-temperature fireproof PC material, fast heat dissipation does not get hot, strong anti-drop ability, reduce safety hazards3. High precision control turn light, double op-amp 385 chip, constant current and constant voltage turn light, timely understanding of the charging situation, red light: charging status, green light: full state4. The use of double panel process, good electronic components, with strong built-in conditions, more secure and durable5. Intelligent chip, multiple protection, full, high temperature automatic disconnection, to prevent the battery overheating leading to loss of battery life6. Output: 36/42V 2A7. Input: AC100-240V 50/60Hz8. Rated power: 6-300W

Read more less

1. Aluminum alloy material, strong and durable2. Easy to install, no rust3. Applicable models: for Xiaomi M365 / PRO4. Material: aluminum alloy5. Inner diameter: about 29.3mm6. Size: about 11.8 x 7.6cm7. Weight: about 470g8. Description: only the folding device, without other items in the picture

Read more less

1. Hollow honeycomb design, shock absorption and more comfortable2. Anti-slip pattern, not easy to slip more secure3. Thickened wear-resistant, can be loaded with greater4. Solid explosion-proof, safe riding without fear of nails5. Good elasticity, suitable for a variety of roads, easy to install6. Material: rubber7. Size: about 24 x 6cm8. Weight: about 1286g

Read more less

1. Inner groove honeycomb design, shock absorption more comfortable to build2. Convex anti-slip pattern design, stronger grip3. Dense shock-absorbing honeycomb, double the comfort4. Anti-vibration and explosion-proof, easy to cope with various road surfaces5. Lightweight and flexible, easy to install6. Material: rubber7. Surface hardness: about 72 degrees8. Size: about 22 x 5.3cm9. Weight: about 830g

Read more less

1. Steering handle, easy to toggle, more secure2. Easy to install, beautiful and cool3. Flashing alarm, high brightness LED light4. Applicable models: for Xiaomi M365 / Pro / Pro 25. Voltage: 4.5-5.5V6. Current: 15-220mA

Read more less

1. Anti-slip pattern design, not easy to slip more safely2. Shock-absorbing burr, riding comfort is enhanced3. Thicker and more wear-resistant, can be loaded more4. Strong grip, firm riding safer5. Material: rubber6. Weight: about 895g7. Size: inner diameter about 16.5cm, outer diameter about 27cm, tire width about 9.5cm

Read more less

1. For Xiaomi M365 electric scooter, battery charger power cord2. Material: fireproof wire3. Voltage: 42V4. Package: PE bag5. Weight: about 92g6. Size: line length about 1.5m

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Anti-slip pattern design, not easy to slip more safely2. Shock-absorbing burr, riding comfort is enhanced3. Thicker and more wear-resistant, can be loaded more4. Strong grip, firm riding safer5. Material: rubber6. Weight: about 895g7. Size: inner diameter about 16.5cm, outer diameter about 27cm, tire width about 9.5cm

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Adopt high performance 32-bit MCU2. Protection functions for abnormal conditions such as over-voltage, over-current, over-heat and under-voltage3. Constant speed cruise control4. Brake energy recovery5. Adjustable speed limit6. Sport and comfort mode switching7. Firmware upgrade through APP, LEDZOD APP (with Bluetooth function version)8. Mobile APP function, set parameters, view status9. Double closed-loop system, quiet operation, smooth cut in the second acceleration10. Intelligent digital displayPower parameters:1. Speed: up to 27KM/H2. Climbing angle: within 15 degrees3. Drive motor torque: up to 35NM x 24. Drive motor power: up to 350W x 25. Instantaneous power: up to 700W6. Motor control mode: sine wave vector control, current + speed closed loop control algorithm7. Scope of application: applicable to Xiaomi scooter M365/PRO complete system replacement (this program requires matching motor battery replacement)8. Standard list: controller + instrument panel + gas pedal + headlight + taillight + extension cable9. Dimensions:- Controller: about 12cm long, about 4.7cm wide, about 3.7cm high, about 9cm long out of the line- Bluetooth board: about 7.5 x 2.2 x 1.5cm, the connection cable is about 25cm long, the output cable is about 11.5cm long- Accelerator: approx. 6.5 x 4.5 x 2.7cm- Headlight: about 4.3 x 3.1 x 2.5cm - Connection cable: approx. 1cm in diameter at the mouth, approx. 128cm in length- Tail light: about 3.1 x 1.2 x 1.7cm, wire length about 90cm- Face cover: top cover approx. 4.5 x 3.2 x 0.4cm, bottom cover approx. 8.8 x 3.3 x 0.4cm - Hand brake: about 14.8 x 8.5 x 4.2cm- Waterproof silicone cover: about 13.5 x 3.4 x 0.5cm - Handbrake silicone cover: approx. 8 x 1.7 x 2cm

Read more less

1. Waterproof gasket, effective protection of the battery, safer riding in the rain2. Strong adhesion, not easy to fall off, easy to install3. When installing, you need to open the back cover and use a hair dryer to heat the waterproof pad for better adhesion4. Material: PE5. Packaging: OPP bag packaging6. Weight: about 40g

Read more less

1. Direct replacement use2. Easy installation3. Material: PE4. Applicable for Ninebot Max G305. Package: OPP bag6. Weight: about 80g

Read more less

1. Used to replace the electric scooter reinforced lock repair latch hook pin, fully compatible with the original2. Easy to install, direct replacement use3. Material: aluminum4. Suitable for Xiaomi M365 / Pro5. Size: about 3.6 x 0.5cm6. Weight: about 10g

Read more less

1. Aluminum alloy material, strong and durable, not easy to fade2. Tight and detailed tooth pattern, easy to install, stable and not easy to fall3. Dustproof and waterproof, copper core anti-leakage, more durable4. Material: aluminum alloy5. Packaging: OPP bag packaging6. Weight: about 15g

Read more less

1. Plastic material, wear-resistant and durable2. With small tools, easy to install, stable and not easy to fall3. Effective shock absorption, to prevent driving upside down fender4. Material: plastic5. Packaging: OPP bag packaging6. Weight: about 30g

Read more less

1. Plastic material, wear-resistant and durable2. With small tools, easy to install, stable and not easy to fall3. Effective shock absorption, to prevent driving upside down fender4. Material: plastic5. Packaging: OPP bag packaging6. Weight: about 30g

Read more less

1. Waterproof design, can also be used in the rain, not easy to break2. With night light function, you can clearly see the time at night3. With silicone pad to prevent wear and tear of the handlebar4. Power supply: button battery included5. Material: PE6. Packaging: OPP bag packaging7. Weight: about 100g8. Size: about 4.2 x 2.5cm

Read more less

1. Aluminum alloy material, strong and durable, not easy to fade2. Tight and detailed tooth pattern, easy to install, stable and not easy to fall3. Dustproof and waterproof, copper core anti-leakage, more durable4. Material: aluminum alloy5. Packaging: OPP bag packaging6. Weight: about 15g

Read more less

1. Plastic material, wear-resistant and durable2. With small tools, easy to install, stable and not easy to fall3. Effective shock absorption, to prevent driving upside down fender4. Material: plastic5. Packaging: OPP bag packaging6. Weight: about 30g

Read more less

1. Aluminum alloy material, strong and durable, not easy to fade2. Tight and detailed tooth pattern, easy to install, stable and not easy to fall3. Dustproof and waterproof, copper core anti-leakage, more durable4. Material: aluminum alloy5. Packaging: OPP bag packaging6. Weight: about 15g

Read more less

1. Aluminum alloy material, strong and durable, not easy to fade2. Tight and detailed tooth pattern, easy to install, stable and not easy to fall3. Dustproof and waterproof, copper core anti-leakage, more durable4. Material: aluminum alloy5. Packaging: OPP bag packaging6. Weight: about 15g

Read more less

1. Plastic material, high strength, wear-resistant and durable, can be used for a long time2. Practical and easy to install3. With reflective strip, strengthen the night warning effect4. Material: plastic5. Weight: about 12g6. Size: about 18.9 x 5.9cm

Read more less

1. Plastic material, high strength, wear-resistant and durable, can be used for a long time2. Practical and easy to install3. With reflective strip, strengthen the night warning effect4. Material: plastic5. Weight: about 12g6. Size: about 18.9 x 5.9cm

Read more less

1. Plastic material, wear-resistant and durable2. Strengthen the protection of the tail light line3. The line will be hidden in the rear fender inside the fixed4. Material: plastic5. Packaging: OPP bag packaging6. Weight: about 25g7. Size: about 35.3 x 3.2cm

Read more less

1. Specifications: four cables, two brake lines2. Made of high-quality plastic, durable, sun-proof and anti-aging.3. It can eliminate safety hazards such as short circuit of the central control board, power failure, failure to start, etc.4. It can replace your broken, damaged and non-working dashboards and controls5. Plug and play, easy installation6. Material: plastic, metal7. Applicable models: suitable for Xiaomi pro/pro2/1S scooter

Read more less

1. Made of high-quality stainless steel material, not easy to deform and more durable.2. 6 screws, very easy to install and remove.3. Reduces the accumulation of brake dust on the wheels.4. Air circulates around the brakes to help dissipate heat.5. Suitable for Dualtron Thunder Ultra electric scooter.6. Size: 160mm7. Weight: 123gPacking list:Brake disc x 1Mounting screws x 6

Read more less

1. Compatible models: For Segway G30 Max2. Wear-resistant anti-skid pattern, effectively improve tire grip and stability3. Specifications: 10 inches 60/70-6.54. Material: rubber5. Weight: 0.84 kg

Read more less

1. The brake disc is made of stainless steel with chrome-plated surface, durable and corrosion-resistant.2. Circulate air around the brakes to help dissipate heat.3. Material: stainless steel4. Weight: about 92.8 grams5. Size: diameter about 110mm6. Suitable for Xiaomi M365/1S model

Read more less

1. The brake disc is made of stainless steel with chrome-plated surface, durable and corrosion-resistant.2. Circulate air around the brakes to help dissipate heat.3. Material: stainless steel4. Weight: about 217 grams5. Size: about 140mm in diameter6. Suitable for Xiaomi Ninebot GT1 GT2 Scooter

Read more less

1. Material: aluminum alloy, PBC, plastic2. Rated voltage: 24/36V3. Rated power: 250W4. Under voltage: 20.4V5. Current limit: 14A6. Scope of application: suitable for 5.5-inch aluminum alloy, carbon fiber scooter brushless DC motor7. Weight: about 400 grams8. Size: about 20x17x6 cmFunction:1. EABS electronic braking2. Zero start, non-zero start adjustable3. Cruise control4. Switch between kilometers and miles5. 3-speed speed mode switch6. Single ride mileage record7. ODO total mileage record8. Intelligent energy-saving delay automatic shutdown9. PO-P9 parameter customization, adjust your own car habits

Read more less

1. Material: aluminum alloy, PBC, plastic2. Rated voltage: 24/36V3. Rated power: 250W4. Under voltage: 20.4V5. Current limit: 14A6. Scope of application: suitable for 5.5-inch aluminum alloy, carbon fiber scooter brushless DC motor7. Weight: about 400 grams8. Size: about 20x17x6 cmFunction:1. EABS electronic braking2. Zero start, non-zero start adjustable3. Cruise control4. Switch between kilometers and miles5. 3-speed speed mode switch6. Single ride mileage record7. ODO total mileage record8. Intelligent energy-saving delay automatic shutdown9. PO-P9 parameter customization, adjust your own car habits

Read more less

1. Material: plastic2. Use: scooter front fork cover3. Applicable: suitable for Ninebot MAX G304. Features: strong and durable, good toughness, easy to install, easy to use5. Weight: about 95 grams6. Size: about 20x12cm

Read more less

1. Material: silicone2. Use: dust cover for scooter charging port3. Applicable: applicable for Ninebot ES2-ES44. Features: strong and durable, good toughness, easy to install, easy to use5. Weight: about 5g/pc6. Size: about 5.2x3x1.5cm/pc

Read more less

1. Material: metal2. Use: shock absorber spring for rear wheel of scooter3. Applicable: suitable for KUGOO4. Features: strong and durable, not easy to rust, easy to install, easy to use and comfortable5. Weight: about 250 grams6. Size: about 11.1x4.7cm

Read more less

1. Material: aluminum, PCB2. Use: electric scooter controller module repair and replacement3. Applicable: suitable for Ninebot MAX G304. Features: strong and durable, easy to install, easy to use, digital display screen, high-definition display, screen with Bluetooth function, wear-resistant and durable5. Packing list: controller x1, instrument x1, face cover x1, screw x3, gadget x16. Weight: about 325 grams7. Size: about 16x11x6 cm

Read more less

1. Material: PU, EVA2. Using waterproof fabric + glued waterproof zipper, good waterproof effect3. Large-capacity design to meet daily travel needs and easy access to items4. Reflective pattern design, safer to ride at night5. Using EVA hard shell material, multiple protection, compression resistance and shock absorption6. Dimensions: Small: 12.4 x 11.8 x 24.5 cm, Large: 15 x 13.3 x 29 cm7. Weight: Small: 210g, Large: 259g

Read more less

1. Material: PU, EVA2. Using waterproof fabric + glued waterproof zipper, good waterproof effect3. Large-capacity design to meet daily travel needs and easy access to items4. Reflective pattern design, safer to ride at night5. Using EVA hard shell material, multiple protection, compression resistance and shock absorption6. Dimensions: Small: 12.4 x 11.8 x 24.5 cm, Large: 15 x 13.3 x 29 cm7. Weight: Small: 210g, Large: 259g

Read more less