Bestselling Products

1. Built-in ST7735 driver chip2. 0.85-inch IPS display with 128 x 128 resolution, 65K color, high-definition display image3. SPI communication interface, simple interface, occupies few IO resources, convenient for embedded development4. 2.5D tempered glass panel, good light transmission, scratch-resistant and durable; edge arc design, smooth hand feel5. Mechanical key structure, pressing feels crisp, capable of coping with high-frequency usage6. Supports development on platforms such as Raspberry Pi, Arduino, ESP32, RP2040, STM32, etc., and provides complete supporting materials and sample programsParameters1. Working voltage: 3.3V2. Display color: 65K3. Display panel: IPS4. Communication interface: 4-wire SPI5. Resolution: 128 x 128 pixels6. Display size: 15.21 x 15.21mm7. Pixel pitch: 118.8 x 118.8 micrometers8. Control chip: ST7735Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 860 Carton Weight 27.00kgs / 59.52lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 860 pcs = 377540 pcs 40HQ: 1019 cartons * 860 pcs = 876340 pcs

Read more less

1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 port x 1; 2500M Ethernet RJ45 port x 13. Video: HDMI port x 1, supporting 4K output4. USB: USB 2.0 port (Type-C) x 1; USB 2.0 port (Type-A) x 1; USB 3.2 Gen1 port (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230 / 2242 / 2280 NVMe or AI modules); M.2 B KEY, supporting 4G / 5G communication modules6. Storage: onboard Micro SD card slot (for CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allowable load: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4-pin JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: onboard encryption chip13. Power input: 7V - 36V wide voltage (terminal block + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmBase plate packing list:- CM5-ETH-RS485-4G-BASE x 1- Screw cap x 1Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 16cm * 14cm * 6cm / 6.3inch * 5.51inch * 2.36inch Qty per Carton 96 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 96 pcs = 44832 pcs 40HQ: 1086 cartons * 96 pcs = 104256 pcs

Read more less

1. Sensor model: 2.51MP RGGB2. Resolution: 1920 x 10803. CMOS size: 1/2.57inch4. Pixel size: 3 x 3 um5. Field of view (FOV): 195° (Horizontal) x 152° (Vertical)6. Aperture (F.No): 27. Focal Length (EFL): 1.51mm8. Depth of field: 0.083m - infinity (fixed at 0.4m)9. Distortion: less than -155%10. ISP: built-in11. Frame rate: 1920 x 1080 30fps12. HDR (High dynamic imaging): supported13. LFM (LED flash suppression): supported14. Output format: YUV422 8bit15. Serializer model: MAXIM MAX96717F16. I2C address: 0x80 (8-bit address)17. Camera interface: fakra Z type connector18. Operating voltage: 9 - 12V PoC19. Operating current: less than 200mA 12V20. Operating temperature: -40°C - 85°C21. Protection level: IP67Packaging list:- GMSL-2MP-Camera-A main unit x 1- GMSL Camera wiring (2m double-jumper coaxial cable assembly) x 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 6cm * 6cm * 5cm / 2.36inch * 2.36inch * 1.97inch Qty per Carton 270 Carton Weight 23.00kgs / 50.71lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 270 pcs = 125820 pcs 40HQ: 1083 cartons * 270 pcs = 292410 pcs

Read more less

1. Sensor: IMX7082. Resolution: 11.9 million pixels (4608 x 2592)3. Sensor size: 7.4mm (diagonal)4. Focusing range: 15cm - infinity5. Focal length: 3.08mm6. Diagonal field of view: 120°7. Aperture value (F value): F2.28. Distortion: less than 3.5%9. Infrared cut-off filter: built-in10. Auto focus: supported11. Operating temperature: 0°C - 50°CSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 4cm * 3cm * 3cm / 1.57inch * 1.18inch * 1.18inch Qty per Carton 1584 Carton Weight 25.00kgs / 55.12lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 1584 pcs = 635184 pcs 40HQ: 930 cartons * 1584 pcs = 1473120 pcs

Read more less

1. Sensor: IMX7082. Pixel: 11.9MP (4608 x 2592)3. Focusing method: I2C controller, supports auto focus4. CMOS size: 7.4mm5. Aperture: F2.26. Focal length: 3.08mm7. Diagonal field of view (FOV): 120°8. Supported devices: compatible with all Raspberry Pi motherboard modelsPackaging list:- IMX708-120 Camera (B) x 1- 15PIN FFC 1.0 with 160mm (opposite direction) pitch x 1- RPi Zero V1.3 Camera Cable 15cm x 1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 360 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 360 pcs = 157680 pcs 40HQ: 1018 cartons * 360 pcs = 366480 pcs

Read more less

1. Based on the 40-pin GPIO interface of Raspberry Pi, suitable for Raspberry Pi series motherboards2. Utilizing the DA7212 professional stereo codec chip, controlled via I2C interface and transmitting audio through I2S interface3. Built-in standard 3.5mm headphone jack, allowing music playback through an external headphone4. Built-in AUX input interface, facilitating the expansion connection of other devices5. Built-in speaker terminals and PH2.0 dual-channel speaker interface, supporting multiple types of interfaces for more versatile usage scenarios6. Built-in dual microphones, enabling recording without the need for additional device connections7. Built-in custom function keys and custom function indicator lights8. Supports the highest sampling frequency of 96KHz9. Supports the highest resolution of 24-bitParameters1. Audio codec chip: DA72122. Supply voltage: 5V3. Logic voltage: 3.3V4. Control interface: I2C5. Audio interface: I2S6. DAC signal-to-noise ratio: 100dB7. ADC signal-to-noise ratio: 90dB8. Headphone driver: 160mW (16 ohms, 5V)9. Speaker driver: 2.6W per channel (4 ohms, BTL)Specification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 9cm * 5cm * 3cm / 3.54inch * 1.97inch * 1.18inch Qty per Carton 360 Carton Weight 68.00kgs / 149.91lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 360 pcs = 167760 pcs 40HQ: 1083 cartons * 360 pcs = 389880 pcs

Read more less

1. The entire casing is made of aluminum alloy, which can conduct and dissipate heat over a large area. Coupled with heat dissipation fins, the heat dissipation is more efficient2. The detailed hole layout ensures that each interface can fit tightly to the motherboard, and the interface areas are marked with clear silk-screening for easy viewing3. There are more abundant interfaces, equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other various interfaces. They are more convenient to use4. It supports rail brackets. The back of the host is reserved for installation screw holes, allowing it to be fixed on the rail5. It is equipped with a standard CM5 connector, supporting the connection of Compute Module 5 Lite / eMMC series core boardsParameters1. CM5 slot: suitable for all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 interface x 1; 2500M Ethernet RJ45 interface x 13. Video: HDMI interface x 1, supporting 4K output4. USB: USB 2.0 interface (Type-C) x 1; USB 2.0 interface (Type-A) x 1; USB 3.2 Gen1 interface (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230/2242/2280 NVMe or AI module); M.2 B KEY, supporting 4G/5G communication module6. Storage: built-in Micro SD card slot (applicable to CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allows connection of loads: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4PIN JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: built-in encryption chip13. Power input: 7V - 36V wide voltage (terminal + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmPackaging list:- Metal casing (top cover + bottom shell) and two baffles- CM5-ETH-RS485-4G-BASE x 1- Guide clip (20 x 76mm) x 1- Label x 1- Pink high thermal conductivity silicone sheet x 5- PC insulating sheet (104 x 40 x 0.2mm) x 1- Cross-head screwdriver x 1- Screw pack x 1- 12V 4A power supply x 1Specification: Package Weight One Package Weight 0.71kgs / 1.56lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs 40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. Support simultaneous connection of up to four GMSL cameras2. Support up to 2 x 8M resolution (3840 x 2160) or 4 x 3M resolution (1920 x 1536) video signals3. Adopt the MAX9296 deserializer solution4. Support synchronous signal connection of cameras via GPIO5. Support Raspberry Pi 5 motherboardParameters1. Demultiplexer: MAXIM (ADI) MAX92962. Supports master control: Raspberry Pi 53. Supports serial converter models: MAX9295, MAX96717 and MAX96705, etc.4. Input: GMSL 1/2 (FAKRA Z connector x 4)5. Output: MIPI CSI (22PIN CSI interface x 2)6. Supported: GMSL camera models: ISX031, etc.7. Power input: 12V/1A (5.5 x 2.1mm)8. Operating temperature: -20°C - 65°CPackaging list:- GMSL-Module-Board-4CH-A x 1- 22-pin FPC connector x 2- Power adapter 12V/2A x 1Specification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 10cm * 10cm * 4cm / 3.94inch * 3.94inch * 1.57inch Qty per Carton 108 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 108 pcs = 56160 pcs 40HQ: 1209 cartons * 108 pcs = 130572 pcs

Read more less

1. Built-in ST7735 driver chip2. 0.85-inch IPS display with 128 x 128 resolution, 65K color, high-definition display image3. SPI communication interface, simple interface, occupies few IO resources, convenient for embedded development4. 2.5D tempered glass panel, good light transmission, scratch-resistant and durable; edge arc design, smooth hand feel5. Mechanical key structure, pressing feels crisp, capable of coping with high-frequency usage6. Supports development on platforms such as Raspberry Pi, Arduino, ESP32, RP2040, STM32, etc., and provides complete supporting materials and sample programsParameters1. Working voltage: 3.3V2. Display color: 65K3. Display panel: IPS4. Communication interface: 4-wire SPI5. Resolution: 128 x 128 pixels6. Display size: 15.21 x 15.21mm7. Pixel pitch: 118.8 x 118.8 micrometers8. Control chip: ST7735Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 860 Carton Weight 27.00kgs / 59.52lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 860 pcs = 377540 pcs 40HQ: 1019 cartons * 860 pcs = 876340 pcs

Read more less

1. The entire casing is made of aluminum alloy, which can conduct and dissipate heat over a large area. Coupled with heat dissipation fins, the heat dissipation is more efficient2. The detailed hole layout ensures that each interface can fit tightly to the motherboard, and the interface areas are marked with clear silk-screening for easy viewing3. There are more abundant interfaces, equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other various interfaces. They are more convenient to use4. It supports rail brackets. The back of the host is reserved for installation screw holes, allowing it to be fixed on the rail5. It is equipped with a standard CM5 connector, supporting the connection of Compute Module 5 Lite / eMMC series core boardsParameters1. CM5 slot: suitable for all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 interface x 1; 2500M Ethernet RJ45 interface x 13. Video: HDMI interface x 1, supporting 4K output4. USB: USB 2.0 interface (Type-C) x 1; USB 2.0 interface (Type-A) x 1; USB 3.2 Gen1 interface (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230/2242/2280 NVMe or AI module); M.2 B KEY, supporting 4G/5G communication module6. Storage: built-in Micro SD card slot (applicable to CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allows connection of loads: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4PIN JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: built-in encryption chip13. Power input: 7V - 36V wide voltage (terminal + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmPackaging list:- Metal casing (top cover + bottom shell) and two baffles- CM5-ETH-RS485-4G-BASE x 1- Guide clip (20 x 76mm) x 1- Label x 1- Pink high thermal conductivity silicone sheet x 5- PC insulating sheet (104 x 40 x 0.2mm) x 1- Cross-head screwdriver x 1- Screw pack x 1- 12V 4A power supply x 1Specification: Package Weight One Package Weight 0.71kgs / 1.56lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs 40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. The RP2350A microcontroller chip designed with Raspberry Pi2. Unique dual-core, dual-architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with clock operating frequencies both reaching up to 150 MHz, supporting users to switch flexibly between the two architectures3. Built-in 520KB SRAM, on-board 16MB on-chip Flash4. Adopting Type-C interface, no need to worry about the front or back insertion5. Onboard 1.54-inch LCD screen, 240 x 240 resolution, 65K color6. USB1.1 host and slave device support7. Supports low-power sleep and hibernation mode8. Can be recognized as a large-capacity storage device for drag-and-drop program download via USB9. Exposed 4 multi-functional GPIO pins10. 1 I2C, 1 UART, 2 12-bit ADC, and 2 controllable PWM channels13. Precise on-chip clock and timer14. Built-in temperature sensor, capable of real-time monitoring of chip temperature15. 12 programmable I/O (PIO) state machines, used for custom peripheral supportLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Communication interface: 4-Wire SPI4. Touch type: capacitive sensing6. Display size: 1.54 inches7. Display colors: 65K8. Driving IC: ST77899. Touch IC: CST81610. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs 40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less

1. Support simultaneous connection of up to four GMSL cameras2. Support up to 2 x 8M resolution (3840 x 2160) or 4 x 3M resolution (1920 x 1536) video signals3. Adopt the MAX9296 deserializer solution4. Support synchronous signal connection of cameras via GPIO5. Support Raspberry Pi 5 motherboardParameters1. Demultiplexer: MAXIM (ADI) MAX92962. Supports master control: Raspberry Pi 53. Supports serial converter models: MAX9295, MAX96717 and MAX96705, etc.4. Input: GMSL 1/2 (FAKRA Z connector x 4)5. Output: MIPI CSI (22PIN CSI interface x 2)6. Supported: GMSL camera models: ISX031, etc.7. Power input: 12V/1A (5.5 x 2.1mm)8. Operating temperature: -20°C - 65°CPackaging list:- GMSL-Module-Board-4CH-A x 1- 22-pin FPC connector x 2- Power adapter 12V/2A x 1Specification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 10cm * 10cm * 4cm / 3.94inch * 3.94inch * 1.57inch Qty per Carton 108 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 108 pcs = 56160 pcs 40HQ: 1209 cartons * 108 pcs = 130572 pcs

Read more less

1. Built-in ST7735 driver chip2. 0.85-inch IPS display with 128 x 128 resolution, 65K color, high-definition display image3. SPI communication interface, simple interface, occupies few IO resources, convenient for embedded development4. 2.5D tempered glass panel, good light transmission, scratch-resistant and durable; edge arc design, smooth hand feel5. Mechanical key structure, pressing feels crisp, capable of coping with high-frequency usage6. Supports development on platforms such as Raspberry Pi, Arduino, ESP32, RP2040, STM32, etc., and provides complete supporting materials and sample programsParameters1. Working voltage: 3.3V2. Display color: 65K3. Display panel: IPS4. Communication interface: 4-wire SPI5. Resolution: 128 x 128 pixels6. Display size: 15.21 x 15.21mm7. Pixel pitch: 118.8 x 118.8 micrometers8. Control chip: ST7735Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 860 Carton Weight 27.00kgs / 59.52lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 860 pcs = 377540 pcs 40HQ: 1019 cartons * 860 pcs = 876340 pcs

Read more less

1. The entire casing is made of aluminum alloy, which can conduct and dissipate heat over a large area. Coupled with heat dissipation fins, the heat dissipation is more efficient2. The detailed hole layout ensures that each interface can fit tightly to the motherboard, and the interface areas are marked with clear silk-screening for easy viewing3. There are more abundant interfaces, equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other various interfaces. They are more convenient to use4. It supports rail brackets. The back of the host is reserved for installation screw holes, allowing it to be fixed on the rail5. It is equipped with a standard CM5 connector, supporting the connection of Compute Module 5 Lite / eMMC series core boardsParameters1. CM5 slot: suitable for all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 interface x 1; 2500M Ethernet RJ45 interface x 13. Video: HDMI interface x 1, supporting 4K output4. USB: USB 2.0 interface (Type-C) x 1; USB 2.0 interface (Type-A) x 1; USB 3.2 Gen1 interface (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230/2242/2280 NVMe or AI module); M.2 B KEY, supporting 4G/5G communication module6. Storage: built-in Micro SD card slot (applicable to CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allows connection of loads: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4PIN JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: built-in encryption chip13. Power input: 7V - 36V wide voltage (terminal + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmPackaging list:- Metal casing (top cover + bottom shell) and two baffles- CM5-ETH-RS485-4G-BASE x 1- Guide clip (20 x 76mm) x 1- Label x 1- Pink high thermal conductivity silicone sheet x 5- PC insulating sheet (104 x 40 x 0.2mm) x 1- Cross-head screwdriver x 1- Screw pack x 1- 12V 4A power supply x 1Specification: Package Weight One Package Weight 0.71kgs / 1.56lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs 40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. Support simultaneous connection of up to four GMSL cameras2. Support up to 2 x 8M resolution (3840 x 2160) or 4 x 3M resolution (1920 x 1536) video signals3. Adopt the MAX9296 deserializer solution4. Support synchronous signal connection of cameras via GPIO5. Support Raspberry Pi 5 motherboardParameters1. Demultiplexer: MAXIM (ADI) MAX92962. Supports master control: Raspberry Pi 53. Supports serial converter models: MAX9295, MAX96717 and MAX96705, etc.4. Input: GMSL 1/2 (FAKRA Z connector x 4)5. Output: MIPI CSI (22PIN CSI interface x 2)6. Supported: GMSL camera models: ISX031, etc.7. Power input: 12V/1A (5.5 x 2.1mm)8. Operating temperature: -20°C - 65°CPackaging list:- GMSL-Module-Board-4CH-A x 1- 22-pin FPC connector x 2- Power adapter 12V/2A x 1Specification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 10cm * 10cm * 4cm / 3.94inch * 3.94inch * 1.57inch Qty per Carton 108 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 108 pcs = 56160 pcs 40HQ: 1209 cartons * 108 pcs = 130572 pcs

Read more less

1. Equipped with the ESP32-C6 high-performance 32-bit RISC-V processor, with a main frequency of up to 160 MHz2. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance and an onboard antenna3. Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM, with an external 16MB Flash4. Utilizes the Type-C interface, enhancing user convenience and device compatibility5. Equipped with a 2.16-inch capacitive touch high-definition AMOLED screen, with a resolution of 480 x 480, 16.7M colors, capable of clearly displaying color images6. Built-in CO5300 driver chip and CST9220 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources7. Built-in QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture, step counting and other functions8. Built-in PCF85063 RTC chip, connected to the battery through AXP2101, achieving uninterrupted power supply9. Built-in two customizable side buttons, KEY and BOOT, facilitating the development of custom functions using the buttons10. Built-in 3.7V MX1.25 lithium battery charging and discharging interface11. Exports 1 I2C, 1 UART and 1 USB pad, available for external devices and debugging use12. The benefits of using AMOLED screen include efficient power management, support for multiple output voltages, charging and battery management functions, and optimization of battery life13. Using AMOLED screen, one can achieve higher contrast, wider viewing angle, richer colors and faster response, and the body is thin, with low power consumption and flexibility advantagesParameters1. Display panel: AMOLED2. Display resolution: 480 x 480 pixels3. Display brightness: 600cd/square meter4. Communication interface: QSPI5. Touch control: upported6. Display size: 2.16 inches7. Display color: 16.7M8. Contrast ratio: 100000:19. Driving IC: CO530010. Touch IC: CST9220Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs 40HQ: 958 cartons * 144 pcs = 137952 pcs

Read more less

1. Based on the 40-pin GPIO interface of Raspberry Pi, specially designed for Raspberry Pi 5 2. Utilizing the PCM5122 professional stereo codec chip, controlled via I2C interface and transmitting audio through I2S interface 3. Built-in standard 3.5mm headphone jack, allowing music playback through an external headphone 4. Built-in RCA port, suitable for various working scenarios such as speaker amplifiers 5. Supports the highest sampling frequency of 384KHz 6. Supports the highest resolution of 32bit 7. Supports 2230 / 2242 size NVMe M.2 hard drives or M.2 M KEY AI modules 8. The M.2 M KEY module supports a maximum transfer rate of 8Gbps 9. Size: about 6.5 x 5.65cm Packaging list: - M.2-PCM5122-AUDIO-HAT x 1 - Flush-mounted seats: 2 x 20, 2.54mm x 1 - 16P-Cable-40mm x 1 - Screw cap x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 9cm * 8cm * 4cm / 3.54inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 192 pcs = 79104 pcs 40HQ: 958 cartons * 192 pcs = 183936 pcs

Read more less

1. Flexible and resilient, durable and not prone to breaking2. Excellent electrical conductivity, stable signal transmission, resistant to interference, ensuring stable operation of the equipment3. Compatible with ST/SC/CF series servos4. Interface: 5264-3PIN5. Size: 300mm/900mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 18cm * 8cm * 3cm / 7.09inch * 3.15inch * 1.18inch Qty per Carton 128 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 128 pcs = 52736 pcs 40HQ: 958 cartons * 128 pcs = 122624 pcs

Read more less

1. Flexible and resilient, durable and not prone to breaking2. Excellent electrical conductivity, stable signal transmission, resistant to interference, ensuring stable operation of the equipment3. Compatible with ST/SC/CF series servos4. Interface: 5264-3PIN5. Size: 300mm/900mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 18cm * 8cm * 3cm / 7.09inch * 3.15inch * 1.18inch Qty per Carton 128 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 128 pcs = 52736 pcs 40HQ: 958 cartons * 128 pcs = 122624 pcs

Read more less

1. Flexible and resilient, durable and not prone to breaking2. Excellent electrical conductivity, stable signal transmission, resistant to interference, ensuring stable operation of the equipment3. Compatible with ST/SC/CF series servos4. Interface: 5264-3PIN5. Size: 300mm/900mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 18cm * 8cm * 3cm / 7.09inch * 3.15inch * 1.18inch Qty per Carton 128 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 128 pcs = 52736 pcs 40HQ: 958 cartons * 128 pcs = 122624 pcs

Read more less

1. Processor: Quad-core Arm Cortex-A7 + Single-core RISC-V E9072. Memory: 128MB DDR33. Flash: SPI NAND FLASH (256MB)4. Screen interface: MIPI DSI 4-lane5. Camera interface: MIPI CSI 2-lane6. USB: USB2.0 Type-C port x 1; USB2.0 Type-A port x 17. GPIO: 40-pin interface8. Ethernet port: 1000M Ethernet port x 210. External storage: Micro SD card slot11. Power input: 5V DC12. Others: 2-pin SH1.0 RTC battery interfaceSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 6cm / 3.94inch * 3.15inch * 2.36inch Qty per Carton 96 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 38cm * 34cm / 16.54inch * 14.96inch * 13.39inch Loading Container 20GP: 491 cartons * 96 pcs = 47136 pcs 40HQ: 1140 cartons * 96 pcs = 109440 pcs

Read more less

1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, the high-performance processor has a clock speed up to 160 MHz, while the low-power processor can reach up to 20 MHz2. Integrated with Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, it has excellent radio frequency performance. 3. The board is equipped with an internal antenna and reserved solder pads, allowing it to be configured as an external antenna4. Onboard 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and an external 16MB Flash5. Onboard a 1.64-inch AMOLED capacitive touch screen with a resolution of 280 x 456 and 16.7M color6. The AMOLED screen uses the QSPI interface for display, and the capacitive touch uses the I2C interface7. Onboard a QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect motion posture and count steps, etc8. Onboard PWR and BOOT side buttons, BOOT supports custom key functions, making development more flexible9. Onboard a 3.7V MX1.25 lithium battery charging and discharging interface10. Onboard a Micro SD card slot, allowing external SD card storage for pictures or files11. Onboard a USB Type-C interface, which can be used for power supply and download debugging, facilitating development12. Exposed I2C, UART, and USB pins, available for external devices and debugging, allowing flexible configuration of peripheral functions13. The screen adopts a CNC processing structure with edge bonding, featuring a delicate and soft texture, and overall beauty and durabilityAMOLED screen parameters1. Display panel: AMOLED2. Display resolution: 280 x 456 pixels3. Display brightness: 350 cd/square meter4. Communication interface: QSPI5. Touch: supported6. Display size: 1.64 inches7. Display colors: 16.7M8. Contrast ratio: 60000:19. Driving IC: CO530010. Touch IC: FT6146Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs 40HQ: 958 cartons * 288 pcs = 275904 pcs

Read more less

1. Processor: Quad-core Arm Cortex-A7 + Single-core RISC-V E9072. Memory: 128MB DDR33. Flash: SPI NAND FLASH (256MB)4. Screen interface: MIPI DSI 4-lane5. Camera interface: MIPI CSI 2-lane6. USB: USB2.0 Type-C port x 1; USB2.0 Type-A port x 17. GPIO: 40-pin interface8. Ethernet port: 1000M Ethernet port x 210. External storage: Micro SD card slot11. Power input: 5V DC12. Others: 2-pin SH1.0 RTC battery interfaceSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 8cm * 6cm / 3.94inch * 3.15inch * 2.36inch Qty per Carton 96 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 38cm * 34cm / 16.54inch * 14.96inch * 13.39inch Loading Container 20GP: 491 cartons * 96 pcs = 47136 pcs 40HQ: 1140 cartons * 96 pcs = 109440 pcs

Read more less

1. Integrated comprehensive compound (IAQ), carbon monoxide (CO), organic compounds (TVOC), formaldehyde (HCHO), temperature and humidity detection2. Supports UART interface communication, with a baud rate of 9600bps, 8-bit data, 1 stop bit, no parity bit3. Small size, low cost, high value for money4. Supports UART control interface, can be connected to main control boards such as Raspberry Pi / Pico / Arduino / ESP325. Widely applied, suitable for environmental monitoring, smart home appliances, indoor detection, automotive electronics, etcParameters1. Working voltage: 5V2. Communication interface: UART3. Logic voltage: 3.3V4. Baud rate: 9600bps5. Working current: 6.5mA6. Working humidity: more than 15%RH7. Working temperature: -40 °C - +55 °C8. Fixed aperture: 2.0mm9. Measurement range: formaldehyde: 0 - 1ppm; organic matter: 0 - 5ppm; carbon monoxide: 0 - 100ppm10. Resolution: formaldehyde: 0.001ppm (Effective detection value: 0.015ppm); organic matter: 0.001ppm (Effective detection value: 0.050ppm); carbon monoxide: 0.001ppm (Effective detection value: less than 8ppm)11. Response time: formaldehyde: T10: less than 5s; T90: less than 90s (Gas injection measurement); organic matter: T10: less than 3s; T90: less than 120s (Isobutylene gas injection measurement); carbon monoxide: T10: less than 3s; T90: less than 15s (Gas injection measurement)12. Accuracy error: formaldehyde: 0 - 0.15ppm (±0.02ppm); 0.16ppm+ (less than ±2% FS); organic matter: 0 - 0.2ppm (±0.05ppm); 0.2ppm+ (less than ±2% FS); carbon monoxide: 0 - 8ppm (±2.5ppm); 8ppm+ (less than ±1% FS)13. Size: about 2.3 x 2.55 x 0.95 cmPackaging list:- Environment X6 Sensor x 1- MX1.25 4PIN connection cable, about 200mm in length x 1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 360 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 360 pcs = 157680 pcs 40HQ: 1018 cartons * 360 pcs = 366480 pcs

Read more less

1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, the high-performance processor has a clock speed up to 160 MHz, while the low-power processor can reach up to 20 MHz2. Integrated with Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, it has excellent radio frequency performance. 3. The board is equipped with an internal antenna and reserved solder pads, allowing it to be configured as an external antenna4. Onboard 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and an external 16MB Flash5. Onboard a 1.64-inch AMOLED capacitive touch screen with a resolution of 280 x 456 and 16.7M color6. The AMOLED screen uses the QSPI interface for display, and the capacitive touch uses the I2C interface7. Onboard a QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect motion posture and count steps, etc8. Onboard PWR and BOOT side buttons, BOOT supports custom key functions, making development more flexible9. Onboard a 3.7V MX1.25 lithium battery charging and discharging interface10. Onboard a Micro SD card slot, allowing external SD card storage for pictures or files11. Onboard a USB Type-C interface, which can be used for power supply and download debugging, facilitating development12. Exposed I2C, UART, and USB pins, available for external devices and debugging, allowing flexible configuration of peripheral functions13. The screen adopts a CNC processing structure with edge bonding, featuring a delicate and soft texture, and overall beauty and durabilityAMOLED screen parameters1. Display panel: AMOLED2. Display resolution: 280 x 456 pixels3. Display brightness: 350 cd/square meter4. Communication interface: QSPI5. Touch: supported6. Display size: 1.64 inches7. Display colors: 16.7M8. Contrast ratio: 60000:19. Driving IC: CO530010. Touch IC: FT6146Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs 40HQ: 958 cartons * 288 pcs = 275904 pcs

Read more less

1. Support setting of device address (1 - 255) to enable cascading of multiple devices via RS485 bus2. Onboard voltage stabilizing chip, supporting a wide voltage range of 7V - 36V3. Onboard integrated power isolation, providing stable isolated voltage. The isolated terminals do not require additional power supply4. Onboard optocoupler isolation, capable of signal isolation, with high reliability and strong anti-interference5. Onboard self-recovery fuse and TVS (Transient Voltage Suppression Diode), effectively suppressing surge voltages and transient peak voltages in the circuit, preventing overcurrent, overvoltage, lightning and static electricity6. Onboard 0.002 ohm 1% sampling resistor, 16-bit high-precision acquisition, capable of measuring bidirectional current7. The maximum measurement voltage is supported up to 36V, the maximum measurement current is supported up to 8A, and direct measurement of power is supported8. Rail-mounted enclosure design, supporting stacking combination, easy installation, and safer to use9. Three external LED indicators, facilitating viewing of MCU status and signal transmission/reception statusParameters1. Communication interface: RS4852. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560003. Default communication format: 9600, N, 8, 14. Modbus protocol: standard Modbus RTU protocol5. Power supply voltage: DC 7V - 36V6. Sampling resistance: 0.002 ohm, 1%7. Measurement range: voltage: 0 - 36V, current: ±8A8. Resolution: 0.8mAPackaging list: - Modbus RTU DC Monitor x 1- Power adapter x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 16cm * 11cm * 6cm / 6.3inch * 4.33inch * 2.36inch Qty per Carton 48 Carton Weight 9.00kgs / 19.84lb Carton Size 46cm * 38cm * 34cm / 18.11inch * 14.96inch * 13.39inch Loading Container 20GP: 448 cartons * 48 pcs = 21504 pcs 40HQ: 1041 cartons * 48 pcs = 49968 pcs

Read more less

1. High-performance MCU equipped with RISC-V 32-bit dual-core and single-core processors2. Board-mounted ESP32-C6H8 Wi-Fi 6 coprocessor, expanding the Wi-Fi 6 and BLE 5 functions of ESP32-P43. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM and 8KB TCM4. Powerful image and voice processing capabilities, image and voice processing interfaces include JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP) and H264 video encoder5. Chip packaging with 32MB PSRAM stacked inside and 16MB Nor Flash integrated outside6. Adopting Type-C interface, enhancing user convenience and device compatibility7. Board-mounted 3.5-inch capacitive touch high-definition IPS screen, 320 x 480 resolution, 262K color, capable of clearly displaying color images8. Built-in ST7796 driver chip and FT6336 capacitive touch chip, communicating via SPI and I2C interfaces respectively, not occupying excessive interface pin resources9. Board-mounted PWR and BOOT two customizable side buttons, facilitating the development of custom functions through button usage10. Board-mounted 3.7V MX1.25 lithium battery charging and discharging interface11. Externally connected I2C, UART, USB and multiple GPIOs, available for external devices and debugging, flexible configuration of peripheral functions12. Board-mounted Micro SD card slot, providing expansion storage, fast data transmission and flexibility, suitable for data recording and media playback, simplifying circuit design13. Board-mounted camera interface, supporting OV5647 and other cameras (MIPI-CSI)14. AXP2101 provides an efficient power management solution, supporting multiple configurable output voltages, integrating charging and battery management functions, helping to extend battery life15. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and permission separationLCD screen parameters1. Display panel: IPS2. Display resolution: 320 x 480 pixels3. Display brightness: 220 cd/square meter4. Communication interface: SPI5. Touch type: capacitive sensing6. Display size: 3.5 inches7. Display colors: 262K8. Contrast ratio: 1100:19. Driving IC: ST779610. Touch IC: FT6336OV5647 camera specifications1. Sensor: OV56472. Pixels: 5 million3. Focal length: 3.07mm4. Distortion: less than 1.5%5. Image: static image resolution 2592 x 1944 pixels6. CMOS size: 1/4 inch7. Aperture: F2.48. Diagonal field of view: 72.9°9. Depth of field: 20cm - infinity10. Video: 1920 x 1080p 30, 1280 x 720p 60, 640 x 480p 60, 640 x 480p 90Packaging list:- ESP32-P4-WIFI6-Touch-LCD-3.5-EN host x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 14cm * 9cm * 4cm / 5.51inch * 3.54inch * 1.57inch Qty per Carton 96 Carton Weight 10.00kgs / 22.05lb Carton Size 44cm * 38cm * 34cm / 17.32inch * 14.96inch * 13.39inch Loading Container 20GP: 469 cartons * 96 pcs = 45024 pcs 40HQ: 1088 cartons * 96 pcs = 104448 pcs

Read more less

1. Onboard voltage regulation chip, supporting a wide voltage range from 7V to 36V, and supporting PoE Ethernet power supply2. Supports control via MQTT protocol, providing Alibaba Cloud MQTT application routines3. Onboard integrated power isolation, capable of providing stable isolated voltage, and the isolated end does not require additional power supply4. Input features bidirectional optocoupler isolation, supporting passive and active switch input, built-in anti-jitter algorithm, relays support switch input linkage mode or inversion mode control5. Output uses Darlington, with optocoupler isolation, stronger driving capability, with a driving current of up to 500mA, and built-in reverse current diode protection6. Output has flash-on and flash-off functions, can be set with parameters in the instruction, automatically turns off after a certain period of time after the output is turned on7. Rail-mounted enclosure design, convenient installation, safer to use8. External indicator light, convenient for checking input/output status, MCU status and signal transmission/reception status9. Size: about 14.5 x 9 x 4 cmPackaging list:- Modbus POE ETH IO 8CH host unit x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 40 pcs = 17520 pcs 40HQ: 1018 cartons * 40 pcs = 40720 pcs

Read more less

1. Equipped with the high-performance Xtensa 32-bit LX7 dual-core processor of ESP32-S3R8, with a main frequency of up to 240 MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna3. Equipped with 512KB of SRAM and 384KB of ROM, and stacked 8MB PSRAM and externally connected 16MB Flash4. Uses Type-C interface, eliminating the need to worry about the front or back insertion, improving the users convenience and device compatibility5. Equipped with a 1.54-inch LCD screen, 240 x 240 resolution, 262K color, capable of clearly displaying color images6. Equipped with ES7210 audio encoding chip, supporting dual-microphone audio acquisition and echo cancellation function7. Equipped with ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI8. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture to expand applications9. Exposed I2C, UART and other pads, available for external devices and debugging use, flexible configuration of peripheral functions10. Equipped with 3 customizable function buttons, capable of achieving single-click, double-click, long press and other operations11. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface12. Equipped with Micro SD card slot, enabling storage expansion, high-speed data transmission, improving flexibility of use, suitable for data recording and media playback, simplifying circuit designLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Display size: 1.54 inches4. Communication interface: 4-Wire SPI5. Touch type: capacitive sensing6. Display colors: 262K9. Driving IC: ST778910. Touch IC: CST81611. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs 40HQ: 1045 cartons * 126 pcs = 131670 pcs

Read more less

1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 port; 2500M Ethernet RJ45 port3. Connectors: Raspberry Pi 40-pin GPIO interface4. MIPI: 4-lane MIPI interface x 2 (22-pin 0.5mm FFC connector)5. Video: HDMI port x 1, supporting 4K output6. M.2: M.2 M KEY (PCIe Gen2/3 x 1)7. Storage: onboard Micro SD card slot (for CM5 versions without eMMC)8. Fan interface: 5V, 4-pin JST-SH PWM fan connector9. Power input: DC 5V 5A10. Size: about 10.1 x 6.2 x 2.34 cmPackaging list:- Metal casing (upper and lower boxes) x 1- CM5-DUAL-ETH-BASE-B x 1- Thermal conductive silicone sheet x 1- Screwdriver x 1- Pink high thermal conductive silicone sheets (5 pieces) x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 53.00kgs / 116.84lb Carton Size 44cm * 37cm * 32cm / 17.32inch * 14.57inch * 12.6inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. The official Raspberry Pi self-designed RP2350 microcontroller chip was adopted2. It features a unique dual-core, dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with operating frequencies reaching up to 150 MHz flexible clock3. It is equipped with 520KB SRAM and 4MB on-chip Flash4. The stamp hole design allows for direct soldering integration onto the user self-designed baseboard5. Supports USB1.1 host and device6. Supports low-power sleep and hibernation modes7. Can be recognized as a large-capacity storage device via USB for drag-and-drop program download8. Up to 26 multi-functional GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, and 16 controllable PWM channels9. Comes with a temperature sensor10. 12 programmable I/O (PIO) state machines for custom peripheral supportParameters1. Processor: dual-core ARM Cortex-M33; Dual-core Hazard3 RISC-V 150MHz2. SRAM: 520KB3. Flash: 4MB4. Security features: boot signature, OTP storage for decryption, hardware SHA-256 accelerator, etc.5. GPIO pins: 266. Peripherals:- UART x 2- SPI x 2- I2C x 2- ADC x 3- USB 1.1 and PHY x 1- PWM x 16- PIO state machines x 12- HSTX x 1Entry-level kit packaging list:- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- Large breadboard + breadline x 1- USB cable Type A male to Micro male, about 1.2 meters long x 1Sensor kit packaging list:- Sensor kit x 1- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- PH2.0 4PIN connection cable 300mm (5pcs) × 1- PH2.0 double-ended connection cable 4PIN opposite direction (15pcs) x 1- Infrared remote control x 1- USB cable Type A male to Micro male about 1.2 meters x 1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 4cm * 4cm / 3.15inch * 1.57inch * 1.57inch Qty per Carton 432 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 432 pcs = 177984 pcs 40HQ: 958 cartons * 432 pcs = 413856 pcs

Read more less

1. The official Raspberry Pi self-designed RP2350 microcontroller chip was adopted2. It features a unique dual-core, dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with operating frequencies reaching up to 150 MHz flexible clock3. It is equipped with 520KB SRAM and 4MB on-chip Flash4. The stamp hole design allows for direct soldering integration onto the user self-designed baseboard5. Supports USB1.1 host and device6. Supports low-power sleep and hibernation modes7. Can be recognized as a large-capacity storage device via USB for drag-and-drop program download8. Up to 26 multi-functional GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, and 16 controllable PWM channels9. Comes with a temperature sensor10. 12 programmable I/O (PIO) state machines for custom peripheral supportParameters1. Processor: dual-core ARM Cortex-M33; Dual-core Hazard3 RISC-V 150MHz2. SRAM: 520KB3. Flash: 4MB4. Security features: boot signature, OTP storage for decryption, hardware SHA-256 accelerator, etc.5. GPIO pins: 266. Peripherals:- UART x 2- SPI x 2- I2C x 2- ADC x 3- USB 1.1 and PHY x 1- PWM x 16- PIO state machines x 12- HSTX x 1Entry-level kit packaging list:- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- Large breadboard + breadline x 1- USB cable Type A male to Micro male, about 1.2 meters long x 1Sensor kit packaging list:- Sensor kit x 1- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- PH2.0 4PIN connection cable 300mm (5pcs) × 1- PH2.0 double-ended connection cable 4PIN opposite direction (15pcs) x 1- Infrared remote control x 1- USB cable Type A male to Micro male about 1.2 meters x 1Specification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 96 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 96 pcs = 39552 pcs 40HQ: 958 cartons * 96 pcs = 91968 pcs

Read more less

1. The official Raspberry Pi self-designed RP2350 microcontroller chip was adopted2. It features a unique dual-core, dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with operating frequencies reaching up to 150 MHz flexible clock3. It is equipped with 520KB SRAM and 4MB on-chip Flash4. The stamp hole design allows for direct soldering integration onto the user self-designed baseboard5. Supports USB1.1 host and device6. Supports low-power sleep and hibernation modes7. Can be recognized as a large-capacity storage device via USB for drag-and-drop program download8. Up to 26 multi-functional GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, and 16 controllable PWM channels9. Comes with a temperature sensor10. 12 programmable I/O (PIO) state machines for custom peripheral supportParameters1. Processor: dual-core ARM Cortex-M33; Dual-core Hazard3 RISC-V 150MHz2. SRAM: 520KB3. Flash: 4MB4. Security features: boot signature, OTP storage for decryption, hardware SHA-256 accelerator, etc.5. GPIO pins: 266. Peripherals:- UART x 2- SPI x 2- I2C x 2- ADC x 3- USB 1.1 and PHY x 1- PWM x 16- PIO state machines x 12- HSTX x 1Entry-level kit packaging list:- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- Large breadboard + breadline x 1- USB cable Type A male to Micro male, about 1.2 meters long x 1Sensor kit packaging list:- Sensor kit x 1- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- PH2.0 4PIN connection cable 300mm (5pcs) × 1- PH2.0 double-ended connection cable 4PIN opposite direction (15pcs) x 1- Infrared remote control x 1- USB cable Type A male to Micro male about 1.2 meters x 1Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 22cm * 22cm * 6cm / 8.66inch * 8.66inch * 2.36inch Qty per Carton 12 Carton Weight 5.00kgs / 11.02lb Carton Size 46cm * 38cm * 24cm / 18.11inch * 14.96inch * 9.45inch Loading Container 20GP: 635 cartons * 12 pcs = 7620 pcs 40HQ: 1475 cartons * 12 pcs = 17700 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 56 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 37cm * 30cm / 16.54inch * 14.57inch * 11.81inch Loading Container 20GP: 572 cartons * 56 pcs = 32032 pcs 40HQ: 1327 cartons * 56 pcs = 74312 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 56 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 37cm * 30cm / 16.54inch * 14.57inch * 11.81inch Loading Container 20GP: 572 cartons * 56 pcs = 32032 pcs 40HQ: 1327 cartons * 56 pcs = 74312 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs 40HQ: 1045 cartons * 252 pcs = 263340 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs 40HQ: 1045 cartons * 252 pcs = 263340 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs 40HQ: 1045 cartons * 252 pcs = 263340 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 56 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 37cm * 30cm / 16.54inch * 14.57inch * 11.81inch Loading Container 20GP: 572 cartons * 56 pcs = 32032 pcs 40HQ: 1327 cartons * 56 pcs = 74312 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 56 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 37cm * 30cm / 16.54inch * 14.57inch * 11.81inch Loading Container 20GP: 572 cartons * 56 pcs = 32032 pcs 40HQ: 1327 cartons * 56 pcs = 74312 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs 40HQ: 1045 cartons * 252 pcs = 263340 pcs

Read more less

1. The GMSL-1MP-Camera-A camera module adopts a 1MP automotive-grade CMOS image sensor and integrates the MAXIM MAX96701 GMSL serializer. It includes a professionally calibrated image signal processor (ISP), delivering clear and stable image quality. The entire unit features an IP67-rated case and comes with an AA lens, and each unit is precisely focused and glue-secured before shipment, making it well-suited for automotive and other demanding applications.Specifications:1. Sensor:--Model: 1.3MP RGGB--Resolution: 1280 × 960--CMOS Size: 1/3.55 inch--Pixel Size: 3.0 μm × 3.0 μm2. Lens: Field of View: 196-degree (H) × 151-degree (V)3. ISP: Built-in4. Frame Rate: 1280 × 960 at 30 fps5. Output Format: YUV422 (8-bit)6. Serializer:--Model: MAXIM MAX96701--I2C Address: 0x80 (8-bit address)7. Camera Interface: TE Fakra (C Code)8. Operating Voltage: 9 ~ 12V PoC9. Operating Current: Less than 150 mA at 12V10. Operating Temperature: -40 ~ 85 degrees Celsius11. Protection Rating: IP67Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 6cm * 6cm * 5cm / 2.36inch * 2.36inch * 1.97inch Qty per Carton 270 Carton Weight 23.00kgs / 50.71lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 270 pcs = 125820 pcs 40HQ: 1083 cartons * 270 pcs = 292410 pcs

Read more less

The IMX291-83 IR-CUT Camera features the IMX291 starlight-grade image sensor and is compatible with the full range of Raspberry Pi boards and Compute Modules. It comes standard with an 83-degree lens and 2-megapixel high-definition resolution. Equipped with an onboard IR-CUT dual-filter switcher, it allows for one-touch switching between full-color daytime mode and infrared night vision mode via an onboard DIP switch, ensuring clear and stable imaging day and night.Specifications:1. Image Sensor: IMX2912. CMOS Size: 1/2.8 inch3. Resolution: 2 Megapixels (1920 × 1080)4. Aperture: F2.05. Focal Length: 3.95mm6. Diagonal Field of View: 83 degrees7. Camera Type: Color8. Focus Type: Fixed focus9. Distortion: Less than 33%10. Shutter Type: Rolling shutterSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs 40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less

1. The ESP32-C6-LCD-0.85 is a microcontroller development board supporting 2.4GHz Wi-Fi 6 and Bluetooth BLE 5. It features a custom-molded, compact, and stylish square plastic housing with a premium feel. The board integrates peripherals such as a 0.85-inch IPS color LCD, a Micro SD card slot, eight RGB LEDs, and a low-power audio codec chip, facilitating the development of multimedia and interactive applications. With these hardware resources, the board supports functions like image display, audio playback, and lighting control, making it suitable for both rapid prototyping and integration into end products for customization and further development. 2. Powered by the high-performance ESP32-C6 32-bit RISC-V processor, with a clock speed of up to 160 MHz3. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless connectivity; features an onboard antenna and excellent RF performance4. Built-in 512 KB SRAM, 320 KB ROM, and 8 MB Flash5. Uses a Type-C interface for enhanced user convenience and device compatibility6. Onboard 0.85-inch LCD screen with 128 × 128 resolution and 65K colors7. Onboard ring of 8 RGB LEDs, programmable for various dynamic lighting effects8. Onboard 3.7V MX1.25 interface for lithium battery charging and discharging9. Breakout pads for I2C, UART, etc., enabling connection to external devices, debugging, and flexible peripheral configuration10. Onboard Micro SD card slot providing expandable storage, fast data transfer, and flexibility; suitable for data logging and media playback, simplifying circuit design11. Includes onboard ES8311 audio codec chip, dual-microphone module, and other resourcesLCD Screen Specifications:1. Display resolution: 128 × 128 pixels2. Display colors: 65K3. Display panel: IPS4. Pixel pitch: 39.6 × 118.8 μm5. Interface type: 4-wire SPI6. Driver IC: ST77357. Display size: 15.21 × 15.21 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs 40HQ: 958 cartons * 144 pcs = 137952 pcs

Read more less

1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs 40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less

1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs 40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less

1. Deeply optimized for 24V energy storage and power systems, supporting 100A continuous discharge and 60A charging current. A thickened metal heat dissipation substrate combined with a dense capacitor array ensures the chassis remains cool and stable under heavy loads.2. Built-in Bluetooth module allows for quick pairing by scanning the onboard QR code. Supports real-time reading of core cell data via a mini-program, providing comprehensive battery health monitoring.3. Equipped with a top-tier hardware and software dual-defense system, providing 24/7 protection for vehicle and equipment safety.4. Provides overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, over-temperature protection, and reverse connection protection.5. Abundant onboard expansion slots, including: a UART serial communication interface (for easy connection to a PC or large-screen display), an NTC temperature sensor interface (accurately captures subtle temperature changes within the cell), an 8-column voltage precision acquisition cable interface, and a KEY low-voltage soft switch interface (disconnecting the soft switch cuts off the high-voltage output, ensuring safe operation without sparking).6. Employing a more streamlined, shared-port design, charging and discharging share the same path.7. Comes with built-in screws for securing terminals, a dedicated high-specification 8S data acquisition cable, and a temperature probe, significantly reducing the technical barrier to assembly.Specification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 99 Carton Weight 31.80kgs / 70.11lb Carton Size 50cm * 32cm * 35cm / 19.69inch * 12.6inch * 13.78inch Loading Container 20GP: 476 cartons * 99 pcs = 47124 pcs 40HQ: 1105 cartons * 99 pcs = 109395 pcs

Read more less

1. Rated charging voltage: 14.6V2. Charging current: 50A3. Overcurrent protection: 75A4. Discharge current: 100A5. Employs a simpler wiring design with a single connector for charging and discharging. Comes with built-in screws for securing terminals, a dedicated high-specification data acquisition cable, and a temperature probe; ready to install immediately.6. Designed for 4S 12V battery packs, supporting up to 100A continuous discharge current and 60A charging current, easily handling the startup and operation requirements of high-power loads.7. Built-in Bluetooth module; scan the onboard QR code to download a dedicated app for real-time reading of voltage, current, remaining capacity, and cell status, enabling digital battery management.8. Provides overcharge protection, over-discharge protection, overcurrent protection, short circuit protection, over-temperature protection, and reverse connection protection.9. Onboard expansion slots include: UART serial communication interface (for easy connection to computers or smart screens), NTC... Temperature sensor interface (accurately captures changes in battery cell temperature), voltage acquisition cable interface, and KEY low-voltage soft switch interface (no need for high-voltage, high-current switch; output can be turned off by disconnecting the soft switch, safe and convenient).Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 20cm * 10cm * 5cm / 7.87inch * 3.94inch * 1.97inch Qty per Carton 36 Carton Weight 11.90kgs / 26.23lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 36 pcs = 22320 pcs 40HQ: 1439 cartons * 36 pcs = 51804 pcs

Read more less