Computer Cables & Connectors

1) Brand new high quality generic adapter. 2) Compliant to USB interface Version 1.1/2.0/3.0 3) USB 3.0 AM to Micro-USB Adapter 4) Transfer rate up to USB 3.0 5Gbps

Read more less

1) Used to extend the COM interface to connect the motherboard and old-fashioned game controller interface must motherboard this extension can only be used 2) COM cable with a baffle , installed on the motherboard serial line , you can increase your computer's COM port with the baffles installed in the PCI at 3) 9-pin COM port rear baffle line : one for the standard 9-pin COM port , the other one connected to the motherboard pins Empty PCI slot 4) Baffle behind to in front of mouth 5) Installation is simple and convenient to a 9-pin COM port for your computer 6) Length: 36cm

Read more less

1) Brand new high quality generic adapter. 2) Compliant to USB interface Version 1.1/2.0 3) Connectors: USB Type A male to USB Type Micro 5-pin Male 4) Transfer rate up to USB 2.0 48Mbps 5) Support 360 Degree Swivel

Read more less

1. Interface type: USB 2.0 high speed interface,compatible with USB 1.1 2. Transmission speed: up to 480Mbps 3. Connected storage devices: SATA interface, 44 pin IDE interface, 80 pin IDE line interface (compatible with 40 pin IDE interface) 4. Supported hard disk types: SATA-1.5g/s and SATA 2-3.0g/s hard disks; 2.5 inch 44 pin IDE laptop hard drive; 3.5 inch 40 or 80 pin IDE desktop hard drive; 5.25 inch IDE interface CDROM/DVDROM 5. Cable length: 50cm

Read more less

1. Compliant with USB specification 2.0 2. Active USB extension cable, assure good signal 3. Quality to meet USB specification 4. No signal degradation 5. Available for USB port 6. Support win 98 / 2000 / XP / Mac OS V9.0 or higher

Read more less

1. Compliant with USB specification 2.0 2. Active USB extension cable, assure good signal 3. Quality to meet USB specification 4. No signal degradation 5. Available for USB port 6. Support win 98 / 2000 / XP / Mac OS V9.0 or higher

Read more less

1. USB3.0 wire specification: 2725 (32AWG/1P+D+AL+M) x 2+32AWG/1P+24 AWG/2C+AL+D+B(4/16/0.12AL-MG) OD=4.2 mm; USB2.0 wire specification: 28AWG x 2C, OD3.0mm 2. Plug: Nickel-plated iron shell, 3U gold-plated terminal 3. Inner mold low density PE, outer mold PVC&ABS shell 4. Suitable for directly connecting 2.5 inch/3.5 inch mechanical hard disk or SSD, supporting SATAI, SATAII, SATA3 and other versions 5. The speed of using USB2.0 to SATA can reach 480M/S, the speed of USB3.0 to SATA can reach 5Gbps, and it can support up to 2TB hard drives 6. The product design is compact and easy to carry 7. In order to better protect your hard disk box, the product comes with a 2.5-inch hard disk protection box; 8. Support WIN98/ME/XP/2000/VISTA/WIN7/WIN8/WIN10/IOS and other operating systems 9. Plug and play, no driver required, support hot swap 10. Cable length: 15cm

Read more less

1. OD=6.0mm 2. Transmission rate: 5GPps 3. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 3U 4. Material: inner mold low density PE, outer mold PVC (environmental protection) 5. Backward compatible with USB2.0 and 1.1 versions 6. Higher power, faster charging, easy to drive related equipment 7. It is suitable for USB3.0 expansion of the chassis motherboard and applied to devices with large-capacity file two-way high-speed transmission, such as mobile hard disks, U disks, HUBs, card readers and other portable mobile devices 8.USB3.0 is a full-duplex, four-way differential signal independent of the USB 2.0 signal, supporting simultaneous two-way data transmission 9. Support WINDOWS2003/2007/XP/Vista/WIN7/WIN8, support plug and play, support hot swap 10. Iron sheet size: 120mm or 80mm

Read more less

1. OD=6.0mm 2. Transmission rate: 5GPps 3. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 3U 4. Material: inner mold low density PE, outer mold PVC (environmental protection) 5. Backward compatible with USB2.0 and 1.1 versions 6. Higher power, faster charging, easy to drive related equipment 7. It is suitable for USB3.0 expansion of the chassis motherboard and applied to devices with large-capacity file two-way high-speed transmission, such as mobile hard disks, U disks, HUBs, card readers and other portable mobile devices 8.USB3.0 is a full-duplex, four-way differential signal independent of the USB 2.0 signal, supporting simultaneous two-way data transmission 9. Support WINDOWS2003/2007/XP/Vista/WIN7/WIN8, support plug and play, support hot swap 10. Iron sheet size: 120mm or 80mm

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 60cm

Read more less

1. OD: 4.4mm 2. Material: PVC+aluminum alloy 3. Plug: USB 3.0 AM iron shell nickel-plated, terminal gold-plated 1u; RJ45 terminal gold-plated 1U 4. 4-layer PCB board pressing, stable and no delay 5. Support 10/100/1000Mbps other than gigabit network, backward compatible with USB 2.0 1.1 devices 6. Support notebook for Macbook, suitable for Nintendo Switch, suitable for Xiaomi box, desktop, suitable for Lenovo YOGO and other devices 7. Compatible with win8/10 system, millet box, plug and play (Mac OS /Win7/XP/Linux system needs to install the driver) 8. Using Taiwan original AsiaInfo AX88179 chip

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 30cm

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 3m

Read more less

1. USB3.0 wire specification: 2725 (32AWG/1P+D+AL+M) x 2+32AWG/1P+24 AWG/2C+AL+D+B(4/16/0.12AL-MG), OD= 4.2mm; USB2.0 wire specification: 28AWG x 2C, OD3.0mm 2. Plug: Nickel-plated iron shell, 3U gold-plated terminal 3. Inner mold low density PE, outer mold PVC&ABS shell 4. Suitable for directly connecting 2.5 inch/3.5 inch mechanical hard disk or SSD, supporting SATAI, SATAII, SATA3 and other versions 7. The speed of using USB2.0 to SATA can reach 480M/S, the speed of USB3.0 to SATA can reach 5Gbps, and it can support up to 2TB hard disk 8. The product design is compact and easy to carry 9. In order to better protect your hard disk box, the product comes with a 2.5-inch hard disk protection box 10. Support WIN98/ME/XP/2000/VISTA/WIN7/WIN8/WIN10/IOS and other operating systems 11. Plug and play, no driver required, support hot swap 12. Cable length: 15cm

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 1m

Read more less

1. Wire specifications: 2725 (28AWG/1P+D+AL+M)*2+28AWG/1P+24 AWG/2C+AL+D+B(6/16/0.12AL-MG), OD=6.0mm 2. Plug: copper shell nickel-plated, terminal gold-plated 3U 3. Forming: low-density PE inner mold, PVC outer mold 4. Electroplated metal base and panel 5. The 20Pin interface suitable for connecting to the motherboard is converted into two USB3.0 interfaces, which are installed in an idle optical drive position, so as to provide a front super high-speed USB3.0 interface 6. Hardware requirements: a motherboard with a USB3.0 20Pin interface Or a riser card, with a free optical drive bay chassis 7. Cable length: 80cm

Read more less

1. Cable specifications: 2725 (28AWG/1P+D+AL+M)*2+28AWG/1P+24 AWG/2C+AL+D+B(6/16/0.12AL-MG),OD=6.0mm 2. Color: blue 3. Plug: terminal gold-plated 3U 4. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 5. Transmission rate: 5GPps 6. Backward compatible with USB2.0 and 1.1 versions 7. USB3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission; 8. Support Windows2003/2007/XP/Vista/WIN7/WIN8, support plug and play, support hot swap 9. Suitable for front panel extension 10. Weight: 62g 11. Size: 12x11x1.5cm 12. Cable length: 50 cm

Read more less

1. Wire specifications: 2725 (28AWG/1P+D+AL+M)*2+28AWG/1P+24 AWG/2C+AL+D+B(6/16/0.12AL-MG), OD=6.0mm 2. Plug: copper shell nickel-plated, terminal gold-plated 3U 3. Forming: low-density PE inner mold, PVC outer mold 4. Electroplated metal base and panel 5. It is suitable for connecting to the motherboard 20pin interface, USB2.0 interface, and audio interface to extend into 2 USB3.0 interfaces, 2 USB2.0 interfaces, headphone output and microphone interface, Type-C interface, installed in an idle optical drive position , This provides a powerful multi-functional use solution 6. Hardware requirements: with USB3.0 interface, 10PIN USB2.0 interface and a motherboard or adapter card that supports audio, and a chassis with a free optical drive

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 1.5m

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 2m

Read more less

1. Plug: AM iron shell nickel-plated, AF copper shell nickel-plated, terminal gold-plated 2. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 3. Transmission rate: 5GPps 4. Backward compatible with USB2.0 and 1.1 versions 5. USB 3.0 is a full-duplex, four-channel differential signal independent of the USB 2.0 signal, and supports simultaneous two-way data transmission 6. Support Windows 2003/2007/XP/Vista/Win7/Win8, support plug and play, support hot swap 7. Higher power, faster charging, easy to drive related equipment 8. Suitable for high-speed two-way transfer of large-capacity files, such as computers, mobile hard drives, U disks, HUBs, card readers, cameras, mobile phones and other portable mobile devices 9. Cable length: 5m

Read more less

1.PCIE x 1 A RS232 Serial Port Card 8DB9 can use the idle PCIE x 1 socket on your motherboard to expand 8 RS232 serial ports used for automatic system manufacturing and system integration.2.The PCIE x 1 to 8 serial port card is designed for POS, ATM and other applications. You can connect various serial port devices such as PC, terminal, modem, printer, scanner, etc. Each port has a data rate of 921.6 Kbps.3.Provides the configuration control signal, ensures the serial port equipment, peripheral compatibility allows you to install the multiserial card on the PC or shared server.4.The PCIE to 8DB9 expansion card is equipped with an aluminum alloy heat sink with strong thermal conductivity, which can protect the chip from burning for a long time and extend the life of the adapter card.

Read more less

1.Support 32-bit PCI, 33MHz speed, PCI Standard 2.3 version.2.The 2-Port Serial Card can be installed in an available PCI slot to add two RS232 serial ports. A cost-effective solution for connecting any new or legacy serial device, with data transfer rates up to 115.2 Kbps.3.Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters and more to your system, the adapter card supports IRQ sharing and works perfectly with Windows 7, Server 2008 R2, XP, Server 2003, 2000, ME, 98, 95, NT4, 3.1, DOS and Linux. It does not support win10 operating system.4.Supports standard 16550 UART with 256-byte transmit and receive FIFO.5.The 16550 2-Port PCI2S550 Serial Card can be installed in an available PCI slot to add two RS232 serial ports. A cost-effective solution for connecting any new or legacy serial device, with data transfer rates up to 115.2 Kbps.

Read more less

1. Four-in-one controller: equipped with four core functions: music induction rhythm, PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control2. 3-in-1 controller: equipped with four core functions: PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control3. Universal standard 4-pin temperature control interface and 5V3-pin ARGB interface, strong compatibility4. Multi-interface design, strong magnetic attraction, more convenient for expansion and installation5. Wireless remote control, refuse to be restrained. The controller can be placed in the case and can be remotely controlled through the case. RF frequency: 433.92MHz6. Controller size: 118 (L) x55 (W) x 24 (H) mm7. Rated voltage: 12V (fan motor) + 5V (lamp beads)8. Current: (not more than) 10A9. Power: (not more than) 60W10. Number of interfaces: 8 PWM interfaces (4PIN), 10 ARGB interfaces (3PIN)11. Built-in CR2025 button battery in the remote controlParts List:Controller x 1Remote control x 1SATA power cable x 1Motherboard sync cable x 1PWM temperature control signal line x 1Instruction manual x 1

Read more less

1. Fine workmanship and good performance. 2. Small size. 3. Plug and play, easy to use. 4. Easy to use. 5. Durable.

Read more less

1. Four-in-one controller: equipped with four core functions: music induction rhythm, PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control2. 3-in-1 controller: equipped with four core functions: PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control3. Universal standard 4-pin temperature control interface and 5V3-pin ARGB interface, strong compatibility4. Multi-interface design, strong magnetic attraction, more convenient for expansion and installation5. Wireless remote control, refuse to be restrained. The controller can be placed in the case and can be remotely controlled through the case. RF frequency: 433.92MHz6. Controller size: 118 (L) x55 (W) x 24 (H) mm7. Rated voltage: 12V (fan motor) + 5V (lamp beads)8. Current: (not more than) 10A9. Power: (not more than) 60W10. Number of interfaces: 8 PWM interfaces (4PIN), 10 ARGB interfaces (3PIN)11. Built-in CR2025 button battery in the remote controlParts List:Controller x 1Remote control x 1SATA power cable x 1Motherboard sync cable x 1PWM temperature control signal line x 1Instruction manual x 1

Read more less

1. Fine workmanship and good performance. 2. Small size. 3. Plug and play, easy to use. 4. Easy to use. 5. Durable.

Read more less

1. Four-in-one controller: equipped with four core functions: music induction rhythm, PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control2. 3-in-1 controller: equipped with four core functions: PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control3. Universal standard 4-pin temperature control interface and 5V3-pin ARGB interface, strong compatibility4. Multi-interface design, strong magnetic attraction, more convenient for expansion and installation5. Wireless remote control, refuse to be restrained. The controller can be placed in the case and can be remotely controlled through the case. RF frequency: 433.92MHz6. Controller size: 118 (L) x55 (W) x 24 (H) mm7. Rated voltage: 12V (fan motor) + 5V (lamp beads)8. Current: (not more than) 10A9. Power: (not more than) 60W10. Number of interfaces: 8 PWM interfaces (4PIN), 10 ARGB interfaces (3PIN)11. Built-in CR2025 button battery in the remote controlParts List:Controller x 1Remote control x 1SATA power cable x 1Motherboard sync cable x 1PWM temperature control signal line x 1Instruction manual x 1

Read more less

1. Four-in-one controller: equipped with four core functions: music induction rhythm, PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control2. 3-in-1 controller: equipped with four core functions: PWM intelligent temperature control, 5V ARGB Shenguang synchronization, and wireless remote control3. Universal standard 4-pin temperature control interface and 5V3-pin ARGB interface, strong compatibility4. Multi-interface design, strong magnetic attraction, more convenient for expansion and installation5. Wireless remote control, refuse to be restrained. The controller can be placed in the case and can be remotely controlled through the case. RF frequency: 433.92MHz6. Controller size: 118 (L) x55 (W) x 24 (H) mm7. Rated voltage: 12V (fan motor) + 5V (lamp beads)8. Current: (not more than) 10A9. Power: (not more than) 60W10. Number of interfaces: 8 PWM interfaces (4PIN), 10 ARGB interfaces (3PIN)11. Built-in CR2025 button battery in the remote controlParts List:Controller x 1Remote control x 1SATA power cable x 1Motherboard sync cable x 1PWM temperature control signal line x 1Instruction manual x 1

Read more less

1. Adpter SATA III USB 3.0 External Hard Drive Cable USB to Serial ATA Converter 22pin 6Gbps Hard Drive for 2.5 "HDD / SSD.2. This USB 3.0 to SATA Converter Cable connects any standard 2.5 inch SATA hard drive or Solid State Drive (SSD) to a computer via USB 3.0 ports. It is ideal for backing up files or updating your laptops hard driver.3. SATA 3 specification supports speed up to 6Gbps4. Quick and easy access to external storage5. LED activity indicator;6. Fully backward compatible with USB 3.0 and backwards compatible with USB 2.0 / 1.17. Plug and play, hot swapping8. Compatible with Windows 98/2000 / XP / Vista / 7/8, Mac OS X.

Read more less

1. Wire material: copper, zinc alloy shell2. Contains IC chip3. Process: injection molding4. 12GB/S transfer rate5. Connection line: Mini sas6. Interface type: SATA/ATA7. Connector: SFF-8644 to SFF-8644 1M8. Applicable equipment: computers, TVs, projectors, monitors9. A new generation of SAS storage interface and a new Mini-SAS HD product portfolio10. The product meets the signal bandwidth requirements from 6Gb/s to 12Gb/s or the corresponding SAS 2.1 and proposed SAS 3.0 industry standard signal specifications11. Unit weight: 0.2kg12. Wire length: 1-3 meters

Read more less

1. Wire material: copper2. Stable energy saving3. Easy to install4. Applicable equipment: personal computer5. Widely compatible with various brands of equipment6. Interface type: coaxial interface-coaxial interface7. Short distance, low power consumption, saving money and more stable8. Wire length: 1-5m

Read more less

1. Wire material: copper2. Stable energy saving3. Easy to install4. Applicable equipment: personal computer5. Widely compatible with various brands of equipment6. Interface type: coaxial interface-coaxial interface7. Short distance, low power consumption, saving money and more stable8. Wire length: 1-5m

Read more less

1. Wire material: copper, zinc alloy shell2. Contains IC chip3. Process: injection molding4. 12GB/S transfer rate5. Connection line: Mini sas6. Interface type: SATA/ATA7. Connector: SFF-8644 to SFF-8644 1M8. Applicable equipment: computers, TVs, projectors, monitors9. A new generation of SAS storage interface and a new Mini-SAS HD product portfolio10. The product meets the signal bandwidth requirements from 6Gb/s to 12Gb/s or the corresponding SAS 2.1 and proposed SAS 3.0 industry standard signal specifications11. Unit weight: 0.2kg12. Wire length: 1-3 meters

Read more less

1. Wire material: copper2. Stable energy saving3. Easy to install4. Applicable equipment: personal computer5. Widely compatible with various brands of equipment6. Interface type: coaxial interface-coaxial interface7. Short distance, low power consumption, saving money and more stable8. Wire length: 1-5m

Read more less

1. Wire material: copper2. Stable energy saving3. Easy to install4. Applicable equipment: personal computer5. Widely compatible with various brands of equipment6. Interface type: coaxial interface-coaxial interface7. Short distance, low power consumption, saving money and more stable8. Wire length: 1-5m

Read more less

1. Wire material: copper, zinc alloy shell2. Contains IC chip3. Process: injection molding4. 12GB/S transfer rate5. Connection line: Mini sas6. Interface type: SATA/ATA7. Connector: SFF-8644 to SFF-8644 1M8. Applicable equipment: computers, TVs, projectors, monitors9. A new generation of SAS storage interface and a new Mini-SAS HD product portfolio10. The product meets the signal bandwidth requirements from 6Gb/s to 12Gb/s or the corresponding SAS 2.1 and proposed SAS 3.0 industry standard signal specifications11. Unit weight: 0.2kg12. Wire length: 1-3 meters

Read more less

1. Wire material: copper2. HD video output3. Support 6Gbps bandwidth4. Process: injection molding5. Applicable equipment: server array6. Interface type: MINI SAS36P7. Converter type: MINI SAS line8. SAS interface technology can be backward compatible with SATA9. The SFF-8087 interface is mainly used on the MINI SAS 4i array card as an internal SAS connection line10. SAS is a brand new interface developed after the parallel SCSI interface. This interface is designed to improve the performance, availability and expandability of the storage system, and to provide compatibility with SATA hard drives

Read more less

1. Motherboard 9-pin female header expands two female USB A interfaces2. Also Compatible with USB1.13. Connect USB devices such as dongle and wireless mouse receiver.4.Material: Plastic + Metal5.Interface: USB2.0 9pin6.Support system: WIN2000 / WinXP / 2003 / VISTA / 2008 / WIN 7 / WIN8 32/64 bit / Linux / MAC OS

Read more less

1. Cable material: copper2. Process: cold pressing3. Fast transfer without waiting4. Data security against loss5. Interface type: SFF80886. Applicable equipment: server, switch7. Support SAS/SATA III standard 6Gbit, suitable for users who pay attention to data security8. The shell is made of zinc alloy, which is strong and durable, protects the inner core from damage, and has a longer service life9. SAS uses SATA compatible cables and adopts point-to-point connection, which can easily realize cable installation10. Mainly used on MINI SAS 4X array card, as an external MINI SAS cable, supporting 6Gbps bandwidth11. Length: 2m12. Product weight: 0.1kg

Read more less

1.Colour：Black 2.Theoretical Speed：640MB/s 3.USB Plug：Nickel Plating 4.Environmentally Friendly PVC Material 5.Tinned Copper Double Shielded Wire 6.Replace Cable Part Numbers：UC-E14；UC-E22 7.Applicable Camera Model：D5/D500/D800/D800E/D810/D810A/D850 8.Note: To achieve USB3.0 transmission speed, both devices must use the USB3.0 solution. 9.USB3.0 cable provides data transmission speed ten times higher than USB2.0 (requires device and host support) 10.It can provide up to 900ma power per USB port to ensure that the connected devices get enough power (requires host support) 11.Support USB3.0 (5Gbps), and USB2.0 (480Mbps) and USB1.1 (12Mbps) specifications 12.WINDOWS2002/2003/XP/Vista/WIN7/WIN8/MAC OS system 13.Support plug-and-play and hot-swap express delivery

Read more less

1. The shell is made of aluminum alloy material 2. Easily convert existing cables to your needs 3. Molded construction provides durability 4. For extending existing cables or changing interface types 5. Plug and play, easy to use

Read more less

1. Chip: RTL8761B2. Interface: USB2.03. Bluetooth version: 5.04. Transmission frequency: 2.403-2.480GHZ5. Transfer rate: up to 3MBPS6. Transmission distance: about 10-20M without obstruction7. Support system: WIN7/8/8/8.1/108. Features: wide compatibility, long transmission distance, stable connection, need to install the driver to use9. Weight: about 18g/piece10. Size: about 29x15.4x6.2mm

Read more less

1. Product list: USB to male data cable, 4PIN power cable, converter, 12V/2A power supply2. Interface: USB to SATA3. Data transfer speed: 500MB/S4. Cable length: 1 meter5. Core type: copper core6. Range: 2.5" / 3.5" SATA / IDE HDD7. System: support hot swap/support UASP acceleration8. Support system: Win XP / Win 10 / for Mac Os9. Input voltage: 12V10. Input current: 2A11. Input power: 24W12. Size: 15.5x11x5CM13. Weight: 280G

Read more less

1. Product list: USB to male data cable, 4PIN power cable, converter, 12V/2A power supply2. Interface: USB to SATA3. Data transfer speed: 500MB/S4. Cable length: 1 meter5. Core type: copper core6. Range: 2.5" / 3.5" SATA / IDE HDD7. System: support hot swap/support UASP acceleration8. Support system: Win XP / Win 10 / for Mac Os9. Input voltage: 12V10. Input current: 2A11. Input power: 24W12. Size: 15.5x11x5CM13. Weight: 280G

Read more less

1. USB 3.0 to SATA Hard Drive Converter You can connect any standard 2.5inch / 3.5inch SATA hard drive to your computer via USB 3.0 port at 5Gbps speed2. Supported operating system: Windows 98 / 2000 / XP / Vista / Windows 7 / 8, for Mac OS x3. Plug and play, hot swap4. Backward compatible with USB 2.0 / 1.15. Data transfer speed: 460MB/s6. Wire material: copper7. Wire length: about 45cm8. Supports all 2.5inch / 3.5inch SATA HDD/SDD, BLU-RAY DVD, CD-ROM, DVD-ROM, CD-RE, DVD-RW, DVD+RW combination devices9. Scope of application: suitable for 3.5-inch hard disk, need to be used with 12V power supply; suitable for 2.5-inch HDD / SSD, no power supply required, plug and play10. Size: 50x42mm11. Weight: about 35g

Read more less

1. Product list: USB to male data cable, 4PIN power cable, converter, 12V/2A power supply2. Interface: USB to SATA3. Data transfer speed: 500MB/S4. Cable length: 1 meter5. Core type: copper core6. Range: 2.5" / 3.5" SATA / IDE HDD7. System: support hot swap/support UASP acceleration8. Support system: Win XP / Win 10 / for Mac Os9. Input voltage: 12V10. Input current: 2A11. Input power: 24W12. Size: 15.5x11x5CM13. Weight: 280G

Read more less