Computer & Networking

14152 products


  • PCI-E 1X To Dual PCI Riser Card Extend Adapter Add Expansion Card For PC Computer-garmade.com

    PCI-E 1X To Dual PCI Riser Card Extend Adapter Add Expansion Card For PC Computer

    1. The baffle has an outlet slot, and when the external and internal adapter cards are installed, the PCIE signal is directly led out without switching, ensuring high signal integrity.2. The power indicator adopts blue LED, which can emit blue light after power on, making the whole more beautiful3. Turn out two PCI slots through the PCI-E slot. Similar products only support one PCI slot, and also support dual PCIs working at the same time.4. There is no need for additional power supply when the power is lower than 16W, and there is SATA on the board to strengthen the power supply, which is more flexible to use.5. PCI slot power supply is filtered by solid capacitor, which can work in high temperature and low temperature environmentParameter:1. Interface: motherboard side PCI-E 1X (compatible with 1X 4X 8X 16X)2. Product rate: PCI-E 1.03. Main control chip: ASM10834. System support: WINXP WIN7 WIN8 WIN10 WIN11Note: The USB cable cannot be connected to the USB interface, and must be connected to the supporting small board

    342.47 kr

  • PCI-E 1X To Single PCI With baffle Riser Card Extend Adapter Add Expansion Card For PC Computer-garmade.com

    PCI-E 1X To Single PCI With baffle Riser Card Extend Adapter Add Expansion Card For PC Computer

    1. The baffle has an outlet slot, and when the external and internal adapter cards are installed, the PCIE signal is directly led out without switching, ensuring high signal integrity.2. The power indicator adopts blue LED, which can emit blue light after power on, making the whole more beautiful3. Turn out two PCI slots through the PCI-E slot. Similar products only support one PCI slot, and also support dual PCIs working at the same time.4. There is no need for additional power supply when the power is lower than 16W, and there is SATA on the board to strengthen the power supply, which is more flexible to use.5. PCI slot power supply is filtered by solid capacitor, which can work in high temperature and low temperature environmentParameter:1. Interface: motherboard side PCI-E 1X (compatible with 1X 4X 8X 16X)2. Product rate: PCI-E 1.03. Main control chip: ASM10834. System support: WINXP WIN7 WIN8 WIN10 WIN11Note: The USB cable cannot be connected to the USB interface, and must be connected to the supporting small board

    315.86 kr

  • MSATA To SATA3 Transfer Card SSD Solid State Drive To 6G Interface Conversion Card(ENCMS2S-H01)-garmade.com

    MSATA To SATA3 Transfer Card SSD Solid State Drive To 6G Interface Conversion Card(ENCMS2S-H01)

    1. Interface rate: SATA 6Gbps2. Interface: 2 MSATA form JBOD (back up data before use)3. Support system: WIN7/WIN8/WIN10/WIN11 32/64BIT4. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance5. It is a JBOD mode composed of two disks, that is, the capacity is added, so the speed is the speed of the original SATA SSD, and will not be accelerated6. Transfer the two MSATA hard drives to the SATA 22PIN interface. You may need to use tools to repair it before formatting it when you use it for the first time. Please be aware7. Two disks must be inserted at the same time to useSupport all SATA standard M2.SSD, do not support new NVME M2.SSD, PCI-E M2 SSD! ! !8. Weight: 90 grams

    335.10 kr

  • NVMe M.2 MKEY SSD RAID Array Motherboard PCIE Split Card Heatsink-garmade.com

    NVMe M.2 MKEY SSD RAID Array Motherboard PCIE Split Card Heatsink

    1. Material: aluminum2. Bearing type: alloy bearing3. Applicable brand model: for Panhong PH444. All-aluminum heat sink is used for efficient heat dissipation and equipped with 8 high-quality capacitors to provide stable and safe power for the fan5. Guarantee the stable operation of the SSD, and will not cause the transmission speed of the SSD to drop due to excessive temperature6. Dimensions: about 130 x 80 x 7mm7. Weight: about 148.8g

    157.16 kr

  • M.2NVME-PCIE X4 / X8 / X16 Rotor SATA5 Port Transfer Card JMB585 Chip-garmade.com

    M.2NVME-PCIE X4 / X8 / X16 Rotor SATA5 Port Transfer Card JMB585 Chip

    1. Wire core type: copper core2. Number of branch connectors: one for five3. Chip: JMB5854. Input port: PCIE X4/X8/X16 or M.2/NVME computer host5. Using JMB585 chip solution, high-speed transmission and stable performance, dedicated to meeting the needs of users for massive data space

    288.80 kr

  • USB 3.0 19PIN Header to Type-E Front A-Key Interface Extend USB Ports to PC, Spec: Upward-garmade.com

    USB 3.0 19PIN Header to Type-E Front A-Key Interface Extend USB Ports to PC, Spec: Upward

    1. Product function: convert the motherboard USB3.0 19PIN to TYPE-C front TYPE-E 20PIN2. Product interface: USB3.0 19PIN USB3.1 TYPE-E3. Support system: Any system that can support USB3.0 can be used, and the main board or expansion card with 19PIN socket and the chassis with TYPE-E cable are required4. Precautions: Since 19PIN is GEN1 5Gbps rate, so only 5Gbps rate is transferred out, and the speed cannot be increased5. Compatible with all Windows and Linux systems.

    124.83 kr

  • Ajazz AX368 Computer Game Audio Recognition RGB Headset 3.5mm Version (Black)-garmade.com

    Ajazz AX368 Computer Game Audio Recognition RGB Headset 3.5mm Version (Black)

    1. Listening to the position, comfortable to wear2. 360-degree headset, high-definition microphone, skin-friendly material, streamer RGB, light body, stereo3. Enhance the environmental hearing effect, respond in milliseconds and judge the enemys position in the game in time4. 50MM speaker diameter, heavy cannon diaphragm, provides a wide frequency range, can create a loud and rich sound field just like being in the game, the explosive sound effect is released around the shuttle battlefield all the way.5. Lightweight design, comfortable to wear, with integrated skin-friendly headband, delicate touch, evenly dispersing the pressure on the top of the head6. Comfortable, breathable and not stuffy, the all-inclusive earmuffs fit the contours of the human ear, fully wrapping and fitting ears of different sizes, soft and skin-friendly earmuffs, truly comfortable to wear, light and breathable7. 360-degree omni-directional microphone, freely adjust the curvature of the microphone, adjust the receiving angle to a suitable angle, open black communication barrier-free, the secret of teamwork to win8. Multifunctional wire control design, USB drive-free design, plug and play, bid farewell to tedious wire control adjustments, reduce redundant actions, and play major games easily9. Signal-to-noise ratio: greater than 110dB10. Output power: 20mW (1KHz OdB)11. Microphone: 6050dB/20Hz-16Khz (omnidirectional)12. Wearing method: head-mounted13. Principle of sound production: moving coil14. Speaker: 50mm/20Hz-16Khz15. Impedance: 2.2 kohms16. Sensitivity: 108dB17. Working current: about 65mA18. Working temperature: -10 to 55 degrees Celsius19. Wire length: 2100mm20. Input voltage: USB 5V21. Dimensions: 189.16 x 86.94 x 203.86mm

    384.59 kr

  • PWM Fan Hub Computer CPU Fan Extender(Big 4Pin Interface)-garmade.com

    PWM Fan Hub Computer CPU Fan Extender(Big 4Pin Interface)

    1. Product input: large 4Pin or SATA 2. Product output: motherboard 4-pin interface supports motherboard 3-pin/4-pin fan3. Number of ports: 8 ports4. Product size: about 10 x 4cm5. Product weight: about 48.2gFeatures:1. Expand the 4-pin interface of 8-port fan to centralize the processing of fan wires, but retain the intelligent speed control function, and the interior is neat and beautiful2. It can be directly powered by the power supply, reducing the load pressure on the motherboard, and the power supply and temperature control are both correct.3. Can support 8 12V 2A high-power fans4. Equipped with 8 high-quality capacitors to provide stable and safe power to the fan5. Cut the long socket pins short to avoid the risk of short circuit caused by too long pins6. Equipped with a 2P to 4P PWM fan control line: 2P terminal connected to the 2-pin socket of the controller, 4P CPU PWM 4-pin fan socket connected to the computer motherboard7. Equipped with a strong double-sided adhesive EVA cotton, thickness 2mm, EVA completely covers the bottom8. Equipped with 10 self-locking nylon cable ties, which can be used to fix the PCB, or organize and bundle the installed fan lines

    98.10 kr

  • Double NVME Raid PCI-EX8 Split Card To SATA10 Port Transfer Card-garmade.com

    Double NVME Raid PCI-EX8 Split Card To SATA10 Port Transfer Card

    1. Double NVME Raid PCI-EX8 Split Card, support a variety of systems, support hot swap, driver-free plug and play2. Support PCI-E3.0/4.0; the motherboard must support PCI-E split function, and can set PCI-E X4X4X4 or 4X4 mode; support PCI-E RAID function3. CPU support: CPU support is required, and the CPU must have enough channels. Generally, low-end CPUs do not have enough PCI-E channels, so they may not be able to support4. Using the JMB585 chip solution, high-speed transmission and stable performance, dedicated to meeting the needs of users for massive data space5. Widely applicable to PC computer, server, industrial computer, consumer electronic equipment, storage equipment, NVR/DCR system

    586.30 kr

  • 2pcs USB3.1 Type-E Computer Motherboard Interface 90 Degrees Elbow Front Type-C Adapter(PH74B)-garmade.com

    2pcs USB3.1 Type-E Computer Motherboard Interface 90 Degrees Elbow Front Type-C Adapter(PH74B)

    1. High-speed performance: The USB 3.1 Type-E 90-degree converter supports USB 3.1 10Gbps and 3.2 20Gbps full-speed transmission, ensuring extremely fast data transmission speed of the device.2. Lossless signal transmission: The Type-E converter adapter is equipped with a multi-layer PCB board, which provides lossless signal transmission and ensures seamless data transmission.3. Elegant Design: This USB adapter solves the problem of bulky Type-C connectors compromising the devices aesthetics and cable management. Its sleek and compact design means it offers convenience while taking up minimal space.4. Space-saving: The USB 3.1 Type E 90-degree converter has a compact design and saves space. You can easily place it behind your computer or TV without taking up any extra space.5. 90-degree bendable design: The E-type adapter adopts an upgraded 90-degree bendable design for neat cable management, allowing you to easily route cables and create a clean and organized workspace.6. Using multi-layer circuit board, signal lossless transmission7. Dimensions: 40 x 30 x 5mm8. Product weight: 11 grams / piece

    97.55 kr

  • USB 3.0 19PIN Header to Type-E Front A-Key Interface Extend USB Ports to PC, Spec: Outward-garmade.com

    USB 3.0 19PIN Header to Type-E Front A-Key Interface Extend USB Ports to PC, Spec: Outward

    1. Product function: convert the motherboard USB3.0 19PIN to TYPE-C front TYPE-E 20PIN2. Product interface: USB3.0 19PIN USB3.1 TYPE-E3. Support system: Any system that can support USB3.0 can be used, and the main board or expansion card with 19PIN socket and the chassis with TYPE-E cable are required4. Precautions: Since 19PIN is GEN1 5Gbps rate, so only 5Gbps rate is transferred out, and the speed cannot be increased5. Compatible with all Windows and Linux systems.

    121.75 kr

  • SATA2.0 3Gbps JMB321 Chip SATA Expansion Card 1 to 5 Port Riser Card-garmade.com

    SATA2.0 3Gbps JMB321 Chip SATA Expansion Card 1 to 5 Port Riser Card

    1. SATA2.0 1-to-5-port adapter card: Provides a SATA host and 5 SATA device interfaces, and supports hot swapping. The host computer terminal (Host) must be supported by a motherboard or an expansion card with SATA port multiplication function.2. DC jack that provides DC power input.3. Operating system support: support SATA 1.5Gbps and 3.0Gbps auto-negotiation.4. Suitable for Windows 7 / XP / Vista / 8 / 10 etc.5. Chip: JMB321Precautions:1. This expansion card must support the PM (SATA PORT MULTIPLIER) function on the motherboard or the expansion card to recognize 5 hard disks. The general motherboard SATA does not support this function. If not supported, only one card can be recognized.2. To use, the SATA or DC2.5 power supply must be plugged in to supply power to the expansion card3. SATA2.0 version does not have plug-in display and read/write indicator LED lights

    258.34 kr

  • Yesido HM10 USB-C / Type-C to HDMI HD Adapter Cable, Length:2m-garmade.com

    Yesido HM10 USB-C / Type-C to HDMI HD Adapter Cable, Length:2m

    1. Material: aluminum alloy+ABS+PVC2. Resolution: 4K 60Hz3. Interface: Type-C to HDMI4. Cable length: 2m5. Easy to use, plug and play.6. Small design, easy to carry.7. Audio and video are transmitted synchronously, without delay or lag.8. Gold-plated joints are used, which are resistant to oxidation and rust, and are durable.9. Using PVC wire body, flexible and easy to store, resistant to pulling and not easy to break.10. One-click screen projection, support 4K 60Hz resolution, 3D visual effects, clear picture quality, bring you a different viewing experience.

    191.03 kr

  • V264 3 in 1 USB-C / Type-C to USB3.0 + PD3.0 + HD2.0 3-Ports Multi Splitter Adapter OTG HUB-garmade.com

    V264 3 in 1 USB-C / Type-C to USB3.0 + PD3.0 + HD2.0 3-Ports Multi Splitter Adapter OTG HUB

    1. Mini portable: Easy to carry, very suitable for travel and demonstration2. Interface: Type-C to PD+USB3.0+HDMI2.0 docking station (3 in 1)3. Function: Charging+Data Transfer+Video Output 4. HDMI-compatible interface: support 4K 60Hz high-definition image quality5. USB 3.0 interface: USB disk, keyboard, mouse, mobile hard disk and other USB devices can be connected externally. Up to 5Gbps transmission rate 6. PD interface: 100W power supply at most

    175.75 kr

  • 40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Female Adapter(Black)-garmade.com

    40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Female Adapter(Black)

    1. Compatible with 40Gpss transmission rate, PD240W/50V fast charging, 8K 60Hz, 4K 120Hz.2. Support connection to Type-C interface display, 8K 60Hz on the same screen, audio and video synchronization, clear picture quality, smooth operation.3. Voltage: 50V4. Power: 240W5. Interface input/output: Type-C6. Functions: charging, transmission, screen projection

    74.79 kr

  • PCI-E To 5 SATA 3.0 Expansion Card(Full High Baffle)-garmade.com

    PCI-E To 5 SATA 3.0 Expansion Card(Full High Baffle)

    1. Thickened gold-plated gold fingers, more stable transmission2. Multiple SATA3.0 expansion cards can be installed on the same computer and work at the same time to achieve multiple simultaneous reading3. The system comes with soft RAID and supports 4 storage modes4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Using the JMB585 chip solution, high-speed transmission and stable performance, dedicated to meeting the needs of users for massive data space6. LED working indicator light, the SATA device is connected normally, the indicator light is always on, and the indicator light flashes when data exchange is in the state of reading and writing7. System: Mac OS/Windows/Linux8. Product interface: support PCI-E X4 (compatible with X8 X16)9. Output interface: SATA3.0 x 510. Weight: about 46.6g11. Size: about 12 x 8cm

    326.20 kr

  • AV to HDMI 1080P HD Converter, Length: 1m(Black)-garmade.com

    AV to HDMI 1080P HD Converter, Length: 1m(Black)

    1. Material: ABS2. Power supply: 5V/1A3. Input signal: AV, CVBS composite audio and video4. Output signal: HDMI 1080P/60Hz, 720P/60Hz5. Support video: PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N, compatible with HDCP protocolNote: This product is AV to HDMI, and the product cannot be used in reverse

    130.76 kr

  • 5pcs NGFF M.2 Rotor PCI-E Channel USB3.0 Transfer Card Graphics Extension Transfer(Black)-garmade.com

    5pcs NGFF M.2 Rotor PCI-E Channel USB3.0 Transfer Card Graphics Extension Transfer(Black)

    1. Lossless transfer, high-speed transmission, stable and compatible2. This product is limited to desktop computers with standard M.2M-KEY slots (cannot be used for MSATA slots, nor for mini pci-e wireless network card slots, must be standard mini pci-e slots), Laptop not applicable3. High gold plating: strong oxidation resistance, good conductivity, wear resistance4. Device indicator light: the connection is normal, the device is powered on, and the indicator light is on5. Supports 4 length specifications, and can be cut according to the scissors pattern according to the required specification length6. External graphics card and PCle device can be installed7. Number of interfaces: M.2 SATA mobile hard disk adapter card8. Product accessories: lock plate screw + screwdriver9. Number of interfaces: USB3.0 (PCle protocol)10. Applicable slot: M.2 M KEY11. Total bandwidth: PCle GEN3 X1 8Gb/s12. Function: transfer, expansion, expansion13. Size: 80 x 22mm14. Weight: 11g

    126.04 kr

  • SATA 22PIN To MSATA Or M.2 NGFF SATA Card 2 In 1 SSD Converter Card With SATA 22pin Cable-garmade.com

    SATA 22PIN To MSATA Or M.2 NGFF SATA Card 2 In 1 SSD Converter Card With SATA 22pin Cable

    1. Connect the KEY-B-M SATA definition of the motherboard or the MSATA hard disk to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. The riser card is suitable for 4 different SSD hard disk lengths, suitable for 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF) SSD hard disk lengths and full-height MSATA hard disks.3. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance.4. The riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Parameter:1. Product interface: SATA 22PIN male2. PCB color: black PCB3. Product rate: 20Gbps/10Gbps4. Support protocol: MSATA or M2 NGFF SATA, cannot be used at the same time5. Main control chip: switch with switch6. System support: WIN7/WIN8/WIN10/WIN11/MAC/LINUXPrecautions:1. Support all SATA standard M.2 SSD, do not support NVME M.2 SSD, do not support PCI-E M2 SSD2. MSATA and M2 cannot be used at the same time, and the MSATA and M2 disks must be switched through a switch.

    146.05 kr

  • SATA 22PIN To MSATA Or M.2 NGFF SATA Card 2 In 1 SSD Converter Card With USB 3.0 Cable-garmade.com

    SATA 22PIN To MSATA Or M.2 NGFF SATA Card 2 In 1 SSD Converter Card With USB 3.0 Cable

    1. Connect the KEY-B-M SATA definition of the motherboard or the MSATA hard disk to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver.2. The riser card is suitable for 4 different SSD hard disk lengths, suitable for 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF) SSD hard disk lengths and full-height MSATA hard disks.3. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance.4. The riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change.Parameter:1. Product interface: SATA 22PIN male2. PCB color: black PCB3. Product rate: 20Gbps/10Gbps4. Support protocol: MSATA or M2 NGFF SATA, cannot be used at the same time5. Main control chip: switch with switch6. System support: WIN7/WIN8/WIN10/WIN11/MAC/LINUXPrecautions:1. Support all SATA standard M.2 SSD, do not support NVME M.2 SSD, do not support PCI-E M2 SSD2. MSATA and M2 cannot be used at the same time, and the MSATA and M2 disks must be switched through a switch.

    189.60 kr

  • PCI-E 4X To USB3.2 Gen2x2 Type-C 20Gbps SATA Expansion Card Asmedia ASM3242 Chip-garmade.com

    PCI-E 4X To USB3.2 Gen2x2 Type-C 20Gbps SATA Expansion Card Asmedia ASM3242 Chip

    1. This adapter card can convert the PCIe interface on the motherboard to a USB3.2 Type-C high-speed data transmission interface, and the theoretical transmission speed can reach 20Gbps.2. This expansion card belongs to the USB3.2 GEN2 x 2 standard and is backward compatible with USB3.0 and USB2.03. USB3.2 is a 4X interface, which can be inserted into 4X 8X 16X slots4. To achieve 20Gbps high speed, the motherboard must support PCI-E 3.0 4X, and the hard disk box and TYPE-C cable must also be 20Gbps5. The system only supports systems above WIN10/11, use the systems own driver, no need to install it separately6. Material: PCB+metal7. Main control chip: ASMedia ASM32428. Product interface: single port Type-C9. Support system: WIN10 / WIN11 32/64 BIT / MAC / Linux

    463.23 kr

  • 40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male 3D Bend Adapter(Black)-garmade.com

    40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male 3D Bend Adapter(Black)

    1. Compatible with 40Gpss transmission rate, PD240W/50V fast charging, 8K 60Hz, 4K 120Hz.2. Support connection to Type-C interface display, 8K 60Hz on the same screen, audio and video synchronization, clear picture quality, smooth operation.3. Voltage: 50V4. Power: 240W5. Interface input/output: Type-C6. Functions: charging, transmission, screen projection

    78.19 kr

  • PCI-E 1X GEN3 To SATA3.0 Expansion Card 2 Ports 6Gbps Transfer Expansion IPFS Hard Disk-garmade.com

    PCI-E 1X GEN3 To SATA3.0 Expansion Card 2 Ports 6Gbps Transfer Expansion IPFS Hard Disk

    1. Compliant with Serial ATA Specification 3.0, backward compatible with SATA2.0 and SATA1.0.2. Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.3. Support communication speeds of 6.0Gbps, 3.0Gbps and 1.5Gbps.4. Supports Gen 1i, Gen 2i, Gen 2m, Gen 2x and Gen 3i.5. Support two SATA interfaces.6. Support AHCI 1.0 and IDE mode.7. Support local command queue (NCQ)8. Support switching based on Port Multiplier FIS or switching based on command.9. Support hot swap.10. Compatible with SATA 6G, 3G, 1.5G hard drivesSpecification:1. Product interface: PCI-E 1X 4X 8X 16X2. Chip: JMB5823. Supported specifications: SATA3.0 7PIN4. Bus interface: PCI-Express X1 slot5. Expansion interface: 2 SATA3.0 interfaces6. System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X167. Operating system: Windows10/8/7 (32/64 bit)/Vista (32/64 bit)/XP/2003/2008/linux

    198.73 kr

  • 2pcs M.2 Riser Card NVMe SSD to PCI-E X4 4.0 GEN4(Black)-garmade.com

    2pcs M.2 Riser Card NVMe SSD to PCI-E X4 4.0 GEN4(Black)

    1. Output interface: PCI-E 4.0 NVME KEY-M2. Hard disk size: compatible with 2230 2242 2260 2280 221103. Interface rate: 6200-7200MB/S (MAX)4. Support slot: PCI-E 4X/8X/16X5. Support system: WIN10/11/LINUX6. This riser card adopts 4-layer board differential line pair routing and 7. It adopts PCI-E4.0 connector and supports PCI-E 4.0 4X signal8. M.2 NGFF to PCI-E X4 adapter card, use this adapter card to convert ordinary PCI-E X4 interface to M.2 NVME interface, there are 5 fixed holes on the board, each 22x32 mm, 22x42mm, 22x60mm, 22x80mm, 22x110mm9. Note: SSD is for photo demonstration, not included in shipment10. Size: 130x120mm

    212.81 kr

  • 40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Female Straight Adapter(Black)-garmade.com

    40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Female Straight Adapter(Black)

    1. Compatible with 40Gpss transmission rate, PD240W/50V fast charging, 8K 60Hz, 4K 120Hz.2. Support connection to Type-C interface display, 8K 60Hz on the same screen, audio and video synchronization, clear picture quality, smooth operation.3. Voltage: 50V4. Power: 240W5. Interface input/output: Type-C6. Functions: charging, transmission, screen projection

    73.25 kr

  • PCIE To PCI-E4 Port USB3.0 Expansion Card Graphics Card Extension(Full High Baffle)-garmade.com

    PCIE To PCI-E4 Port USB3.0 Expansion Card Graphics Card Extension(Full High Baffle)

    1. No external power supply, plug and play, more stable2. The 4 USB cables are routed in the same direction, the routing is neat and not messy3. It can be expanded to 4 PCI-E, effectively solving the insufficient PCI-E interface4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Number of interfaces: PCI-E X1 interface x 46. Product interface: support PCI-E X1 (compatible with X4 X8 X16)7. System: Mac OS/Windows/Linux8. Dimensions: about 65 x 55mm9. Weight: about 45.8g

    271.76 kr

  • PCIE To PCI-E4 Port USB3.0 Expansion Card Graphics Card Extension(Half High Baffle)-garmade.com

    PCIE To PCI-E4 Port USB3.0 Expansion Card Graphics Card Extension(Half High Baffle)

    1. No external power supply, plug and play, more stable2. The 4 USB cables are routed in the same direction, the routing is neat and not messy3. It can be expanded to 4 PCI-E, effectively solving the insufficient PCI-E interface4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Number of interfaces: PCI-E X1 interface x 46. Product interface: support PCI-E X1 (compatible with X4 X8 X16)7. System: Mac OS/Windows/Linux8. Dimensions: about 65 x 55mm9. Weight: about 45.8g

    271.76 kr

  • 40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male Side Bend Adapter(Black)-garmade.com

    40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male Side Bend Adapter(Black)

    1. Compatible with 40Gpss transmission rate, PD240W/50V fast charging, 8K 60Hz, 4K 120Hz.2. Support connection to Type-C interface display, 8K 60Hz on the same screen, audio and video synchronization, clear picture quality, smooth operation.3. Voltage: 50V4. Power: 240W5. Interface input/output: Type-C6. Functions: charging, transmission, screen projection

    73.25 kr

  • 40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male Middle Bend Adapter(Black)-garmade.com

    40Gbps 240W USB-C / Type-C Female to USB-C / Type-C Male Middle Bend Adapter(Black)

    1. Compatible with 40Gpss transmission rate, PD240W/50V fast charging, 8K 60Hz, 4K 120Hz.2. Support connection to Type-C interface display, 8K 60Hz on the same screen, audio and video synchronization, clear picture quality, smooth operation.3. Voltage: 50V4. Power: 240W5. Interface input/output: Type-C6. Functions: charging, transmission, screen projection

    77.53 kr

  • 2301 4 in 1 USB+USB-C/Type-C to USB Multi-function Docking Station HUB Adapter-garmade.com

    2301 4 in 1 USB+USB-C/Type-C to USB Multi-function Docking Station HUB Adapter

    1. Material: aluminum alloy2. Output type: 1xUSB 3.0+3xUSB 2.03. The USB charger can charge four mobile phones at the same time4. Mini portable, easy to carry5. Meet the multi-port expansion requirements of the device6. Support 4 ports to use at the same time, no need to wait for data transmission

    118.56 kr

  • Desktop Computer Disk Drive Power Control Switch Saving Power Controller-garmade.com

    Desktop Computer Disk Drive Power Control Switch Saving Power Controller

    1. A small 4Pin needle socket is used to connect the output line, and the output interface can be replaced at will, which is flexible and convenient, and the transmission is stable2. Four high-power dual-channel self-locking mechanical switches are used to independently control the on-off of the four-way power supply, and each switch simultaneously controls two-way power supplies of 12V and 5V3. IDE and SATA 15P 2 two-way input interface, only need to connect any one power input to use, can use two ways at the same time, the power is more powerful4. The four outputs use 8 high-quality solid capacitors for output voltage stabilization. The solid capacitors continue to work stably, have a long service life, fast charging and discharging, and low energy dissipation.5. The size of the rear expansion baffle of the standard large-sized chassis, note that HTPC chassis and small chassis are not supported6. Equipped with four 60cm hard-control output power cables, which are connected to the motherboard with small 4P connectors; international standard 20AGW UL electronic cables are used, and the power cables are wrapped with black braided insulating network tubes to protect the power cables, and they are beautiful and tidy7. Parts list: hardware control board x 1, output power cord x 4, bezel fixing screw x 1

    175.53 kr

  • M.2 NVME To USB 3.0 PCI-E Expansion Card Adapter for Graphics Card(Whiteboard)-garmade.com

    M.2 NVME To USB 3.0 PCI-E Expansion Card Adapter for Graphics Card(Whiteboard)

    1. Product model: M.2 NVME To USB3.0 (PCI-E signal, USB devices cannot be inserted)2. Interface: M.2 NGFF KEY-M3. Support: 2242/2230/2260/2280 M.2 SSD modules4. Product rate: PCI-E 1X5. Material: Alloy+PCBA6. Support system: Windows XP/WIN7/WIN8/WIN10, Linux operating system7. Note: The output board defaults to GEN3, so the card cannot be recognized or an exclamation mark appears! For these motherboards, we need to study the relevant settings in the BIOS, the PCIE in the BIOS, the 16X speed is set to GEN2, GEN1, GEN2 is recommended, and it can be used normally.8. Reminder: M.2 NVME to PCI-E X16 adapter card, using this adapter card can convert M.2 NGFF interface to ordinary PCI-E 16X interface, there are 2 fixed holes on the board, respectively It is 22 x 60m, 22 x 80mm, according to the length of the card slot inside your machine, you can break off the positioning hole.

    92.38 kr

  • 2200W To 6P Graphics Card Power Board For HP Server Power Supply(Black)-garmade.com

    2200W To 6P Graphics Card Power Board For HP Server Power Supply(Black)

    1. Interface: USB3.02. Data transmission speed: 5000 (MB/s)3. The number of branch connectors: 12 6PIN4. Length: 4005. Wire core type: copper core6. Voltage display: support7. Output interface: graphics card 6PIN power port8. Function: lead out the power supply to 12 6PINs, switch on and off synchronously with the main power supply through the detection line9. Support slot: 20PIN+28PIN10. Support power supply: suitable for HP server 500-220W and other power supplies11. Dimensions: 99.9x86mm

    217.10 kr

  • USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: White-garmade.com

    USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: White

    1. Material: aluminum-magnesium alloy2. Support capacity: 3T3. Product size: m.2 nvme key-m4. Transmission interface: TYPE-C5. Transmission speed: 10Gbps6. Main control: Jmicron JMS5837. Support interface: USB3.1 TO M.2 KEY-M8. Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or above9. More thinner, standard USB3.1 interface10. High-speed transfer rate up to 10Gps, driver-free plug and play (downward compatible with 3.0/2.0)11. Only KEY-M NVME SSD is supported12. The chip adopts TYPE-C GEN2 10G version: JMICRON JMS58313. The line length of C-C is 0.5 meters, and the line length of A-C is 0.2 meters14. Hard disk box size: 125mmx40mmx10mm15. Note: The speed of the 3.0 interface needs to be 3.0, and most NVME M2.SSDs are supported. The old SATA standard M2.SSD is not supported, and the PCISATA standard M2.SSD is not supported!

    311.13 kr

  • 3.5-Inch 2 USB 3.0+HD AUDIO Port Desktop PC Floppy Drive Front Panel(Black)-garmade.com

    3.5-Inch 2 USB 3.0+HD AUDIO Port Desktop PC Floppy Drive Front Panel(Black)

    1. Product use: Installed in the idle floppy drive position, providing the front USB interface and audio interface, no need to bend down to plug in the cable, very convenient2. Hardware requirements: the motherboard needs to have a 19Pin and audio interface to use3. This panel is installed to the floppy drive position of the chassis, that is, the size of a 3.5-inch floppy drive, and the size is 102.2 wide x 25.2 high x 94mm4. The audio interface is HD-AUDIO interface, which can only be used if the motherboard supports HD-AUDIO audio interface. Currently, the motherboards on the market all support HD-AUDIO interface. If only one channel has sound, please go to the motherboard official website to download the sound card driver to support HD-AUDIO.5. Because the product is assembled later, it may be a little bit different from your PC case color and size

    155.95 kr

  • PCI-E 1X To M.2 NVME KEY-M SSD Riser Card Adapter Without Baffle-garmade.com

    PCI-E 1X To M.2 NVME KEY-M SSD Riser Card Adapter Without Baffle

    1. M.2 NGFF to PCI-E 1x riser card, use this riser card to convert common PCI-E 1X interface to M.2 NGFF interface.2. There are 4 fixing holes on the board, respectively 22 x 32mm, 22 x 42mm, 22 x 60mm, 22 x 80mm.3. The riser card adopts differential line pair routing and supports PCI-E 3.0 1X signals.4. Support for Samsung PM970 980 981 PM961, 960EVO, SM961, PM951, SM951, INTEL 600P, 760P Lite T10 and other NVME protocol M.2.5. M.2 of SATA protocol is not supported.6. The standard version supports NVME M.2 of 2230, 2242, 2260, 2280Parameter:1. Product color: black PCB2. Dimensions and weight: 30 grams, length 43 x width 33 x height 9.9mm3. Product interface: KEY-M PCI-E 1X4. Support system: WIN10 WIN11 is recommended

    101.29 kr

  • USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Black-garmade.com

    USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Black

    1. Material: aluminum-magnesium alloy2. Support capacity: 3T3. Product size: m.2 nvme key-m4. Transmission interface: TYPE-C5. Transmission speed: 10Gbps6. Main control: Jmicron JMS5837. Support interface: USB3.1 TO M.2 KEY-M8. Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or above9. More thinner, standard USB3.1 interface10. High-speed transfer rate up to 10Gps, driver-free plug and play (downward compatible with 3.0/2.0)11. Only KEY-M NVME SSD is supported12. The chip adopts TYPE-C GEN2 10G version: JMICRON JMS58313. The line length of C-C is 0.5 meters, and the line length of A-C is 0.2 meters14. Hard disk box size: 125mmx40mmx10mm15. Note: The speed of the 3.0 interface needs to be 3.0, and most NVME M2.SSDs are supported. The old SATA standard M2.SSD is not supported, and the PCISATA standard M2.SSD is not supported!

    308.93 kr

  • USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Black with C-C Cable-garmade.com

    USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Black with C-C Cable

    1. Material: aluminum-magnesium alloy2. Support capacity: 3T3. Product size: m.2 nvme key-m4. Transmission interface: TYPE-C5. Transmission speed: 10Gbps6. Main control: Jmicron JMS5837. Support interface: USB3.1 TO M.2 KEY-M8. Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or above9. More thinner, standard USB3.1 interface10. High-speed transfer rate up to 10Gps, driver-free plug and play (downward compatible with 3.0/2.0)11. Only KEY-M NVME SSD is supported12. The chip adopts TYPE-C GEN2 10G version: JMICRON JMS58313. The line length of C-C is 0.5 meters, and the line length of A-C is 0.2 meters14. Hard disk box size: 125mmx40mmx10mm15. Note: The speed of the 3.0 interface needs to be 3.0, and most NVME M2.SSDs are supported. The old SATA standard M2.SSD is not supported, and the PCISATA standard M2.SSD is not supported!

    342.47 kr

  • 5pcs NVME Transfer Card M.2 To PCIE3.0/4.0 Full Speed X4 Expansion Card, Style: Half Height-garmade.com

    5pcs NVME Transfer Card M.2 To PCIE3.0/4.0 Full Speed X4 Expansion Card, Style: Half Height

    1. Material: metal baffle + environmental glass fiber material2. Support hard disk: M KEY hard disk (NGFF is not supported)3. Transmission rate: 32gbps4. Card slot: X16/x8/X45. PCIE: no additional power supply required6. Support system: Windows/MAC/Linux7. Status of the indicator light: it is always on when the power is on. Flashes when reading and writing8. Further improve the performance of the hard disk, so that the computer can meet more needs9. Independent voltage stabilizing capacitor to protect the computer from overcurrent and short circuit damage10. Thickened gold-plated contacts, stable insertion and removal11. Compatible with 2230/2242/2260/2280 long and short M.2 NVME protocol hard drives12. Matrix cooling holes to expand the cooling area13. Speed up the game, transfer 1GB file in 0.7 seconds14. Length: 100mm15. Width: 56.5 mm16. Weight: 18.6 grams17. Note: In addition to the Win8/10 system free drive, other systems need to install the driver to use

    181.90 kr

  • 4 x USB 2.0+HD-AUDIO Desktop PC Case Internal Front Panel-garmade.com

    4 x USB 2.0+HD-AUDIO Desktop PC Case Internal Front Panel

    1. Product use: Because there are more and more USB devices now, when the USB ports on the chassis are not enough, you can use this device to directly convert the USB 19pin interface, 9PIN and audio on the board into 2 USB3.0 interfaces + 2 USB2 .0 and headphone-out and microphone jacks (or 4 USB 2.0 ports and headphone-out and microphone jacks), installed in the vacant optical drive position. In this way, the front USB interface and audio interface are provided, and there is no need to bend down to plug in the cable, which is very convenient2. In addition, in order to save costs, the front panel of the chassis adopts AC-97 interface board. Currently, the front panel, panel cable and chassis on the market all use AC-97 interface, while the main board currently uses HD-AUDIO interface. As a result, there is no sound from a speaker, or the insertion detection jumps around. This problem can be solved with our panel. Real HD-AUDIO interface.3. Hardware requirements: a USB3.0 19PIN interface, a 9PIN USB2.0 interface and a motherboard or adapter card supporting HD-AUDIO audio, and a chassis with a free optical drive.4. Electroplated metal base and panel5. Color: black silver white spray paintPackaging accessories:Optical drive panel x 1Audio cable 9PIN-9PIN x 1Fixing screw x 5

    166.07 kr

  • M.2 NVME To USB 3.0 PCI-E Expansion Card Adapter for Graphics Card(Blackboard)-garmade.com

    M.2 NVME To USB 3.0 PCI-E Expansion Card Adapter for Graphics Card(Blackboard)

    1. Product model: M.2 NVME To USB3.0 (PCI-E signal, USB devices cannot be inserted)2. Interface: M.2 NGFF KEY-M3. Support: 2242/2230/2260/2280 M.2 SSD modules4. Product rate: PCI-E 1X5. Material: Alloy+PCBA6. Support system: Windows XP/WIN7/WIN8/WIN10, Linux operating system7. Note: The output board defaults to GEN3, so the card cannot be recognized or an exclamation mark appears! For these motherboards, we need to study the relevant settings in the BIOS, the PCIE in the BIOS, the 16X speed is set to GEN2, GEN1, GEN2 is recommended, and it can be used normally.8. Reminder: M.2 NVME to PCI-E X16 adapter card, using this adapter card can convert M.2 NGFF interface to ordinary PCI-E 16X interface, there are 2 fixed holes on the board, respectively It is 22 x 60m, 22 x 80mm, according to the length of the card slot inside your machine, you can break off the positioning hole.

    92.38 kr

  • USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Silver White with C-C Cable-garmade.com

    USB3.2 To M.2 NVME Hard Disk Box NGFF PCIE Protocol To TYPE-C, Color: Silver White with C-C Cable

    1. Material: aluminum-magnesium alloy2. Support capacity: 3T3. Product size: m.2 nvme key-m4. Transmission interface: TYPE-C5. Transmission speed: 10Gbps6. Main control: Jmicron JMS5837. Support interface: USB3.1 TO M.2 KEY-M8. Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or above9. More thinner, standard USB3.1 interface10. High-speed transfer rate up to 10Gps, driver-free plug and play (downward compatible with 3.0/2.0)11. Only KEY-M NVME SSD is supported12. The chip adopts TYPE-C GEN2 10G version: JMICRON JMS58313. The line length of C-C is 0.5 meters, and the line length of A-C is 0.2 meters14. Hard disk box size: 125mmx40mmx10mm15. Note: The speed of the 3.0 interface needs to be 3.0, and most NVME M2.SSDs are supported. The old SATA standard M2.SSD is not supported, and the PCISATA standard M2.SSD is not supported!

    332.35 kr

  • 2pcs Graphics Card Spoofer HDMI Dummy Load Simulates HD Displays(Gold)-garmade.com

    2pcs Graphics Card Spoofer HDMI Dummy Load Simulates HD Displays(Gold)

    1. Product interface: HDMI male2. Support system: Compatible with all WINDOWS systems, LINUX MAC3. When remotely controlling the computer, the screen resolution can be set very high4. Make the graphics card work normally during scientific computing, and the heat dissipation is normal5. Solve the problem that the work stops for no reason and the graphics card does not work6. Can simulate 4K resolution, 3840x2160 resolution7. Small size, chips low power consumption, no heat8. Support plug and play, hot swap9. No driver required, support all systems10. Product size: 20x17x9mm

    139.12 kr

  • Mini PCI-E To USB3.2 GEN1 Front 19Pin 2 Ports Transfer Card Supports Half High S 4PIN Electric Point-garmade.com

    Mini PCI-E To USB3.2 GEN1 Front 19Pin 2 Ports Transfer Card Supports Half High S 4PIN Electric Point

    1. Powerful chip, high-speed and stable transmission2. Support USB hot plug function3. Interface rate: USB3.2 GEN1 5Gbps4. Output interface: 1 USB3.2 GEN1 19PIN5. Input interface: MINI PCI-E6. Support system: WINXP/WIN7/8/10/11/LINUX7. Product main control: Renesas uPD720202 chipset8. Purpose: With the popularity of USB3.0, you can insert this adapter card on the motherboard with MINI PCI-E slot and install the driver to expand 2 USB3.0 interfaces! It can satisfy you to use 2 USB3.0 devices to copy data to each other9. Interface bandwidth: SATA15PIN/4PIN power port optional10. Driver installation instructions: Open the supporting CD folder ---/NEC/D720201-2, and then double-click the exe file inside to install11. Compliant with PCI-Express Specification Version 2.012. Compliant with USB3.0 SuperSpeed specification version 1.013. Compliant with xHCI Specification Version 1.014. Backward compatible with USB2.0, USB1.1, USB1.015. Transmission rate: 5000/480/12/1.5Mbps16. Built-in small 4PIN enhanced power interface17. It needs to be plugged into the SATA power interface before it can work18. The expansion card uses a large capacitor, which greatly ensures the stability of the USB power supplyHardware requirements:1. A motherboard or notebook that supports MINI PCI-E2. This product is a MINI PCI-E expansion card. It needs to have a free MINI PCI-E slot on the motherboard before it can be installed and used. It cannot be installed and used on the other PCI slot. Do not insert it into the PCI slot.Notice:1. The riser card can reach 370-400M/S above PCI-E2.0, and can reach 120-170M/S under PCI-E1.02. When purchasing, please confirm whether your riser card supports PCI-E2.0 or above

    200.27 kr

  • PCI-E to SATA3.0+M2 NGFF Expansion Card 6G Hard Disk Transfer Card(Black)-garmade.com

    PCI-E to SATA3.0+M2 NGFF Expansion Card 6G Hard Disk Transfer Card(Black)

    1. Powerful chip, high-speed and stable transmission2. Only support M.2 NGFF, SATA protocol SSD, do not support NVME3. Interface rate: 6Gbps4. Output interface: M.2 SATA+SATA3.05. Main control chip: ASMedia ASM10616. Support system: WINXP/WIN7/8/10/11/LINUX7. Support slot: PCI-E 1XPCB8. Size: 120x91mmNotice- The motherboard needs to support PCI-E2.0 or above to run to 380-400M/S, and only about 100-200M under PCI-E1.0- SSD is used for photo demonstration, it is not suitable for delivery

    220.84 kr

  • 3.5-Inch 2 USB 2.0+HD AUDIO Port Desktop PC Case Floppy Drive Front Panel(Silver White)-garmade.com

    3.5-Inch 2 USB 2.0+HD AUDIO Port Desktop PC Case Floppy Drive Front Panel(Silver White)

    1. Product use: Installed in the idle floppy drive position, providing the front USB interface and audio interface, no need to bend down to plug in the cable, very convenient2. Hardware requirements: the motherboard needs to have a USB 2.0 9Pin and audio interface to use3. This panel is installed to the floppy drive position of the chassis, that is, the size of a 3.5-inch floppy drive, and the size is 102.2 wide x 25.2 high x 94mm4. The audio interface is HD-AUDIO interface, which can only be used if the motherboard supports HD-AUDIO audio interface. Currently, the motherboards on the market all support HD-AUDIO interface. If only one channel has sound, please go to the motherboard official website to download the sound card driver to support HD-AUDIO.5. Because the product is assembled later, it may be a little bit different from your case color and size

    140.33 kr

  • Mini PCI-E To USB3.2 GEN1 Front 19Pin 2 Ports Transfer Card Supports Half High SATA-garmade.com

    Mini PCI-E To USB3.2 GEN1 Front 19Pin 2 Ports Transfer Card Supports Half High SATA

    1. Powerful chip, high-speed and stable transmission2. Support USB hot plug function3. Interface rate: USB3.2 GEN1 5Gbps4. Output interface: 1 USB3.2 GEN1 19PIN5. Input interface: MINI PCI-E6. Support system: WINXP/WIN7/8/10/11/LINUX7. Product main control: Renesas uPD720202 chipset8. Purpose: With the popularity of USB3.0, you can insert this adapter card on the motherboard with MINI PCI-E slot and install the driver to expand 2 USB3.0 interfaces! It can satisfy you to use 2 USB3.0 devices to copy data to each other9. Interface bandwidth: SATA15PIN/4PIN power port optional10. Driver installation instructions: Open the supporting CD folder ---/NEC/D720201-2, and then double-click the exe file inside to install11. Compliant with PCI-Express Specification Version 2.012. Compliant with USB3.0 SuperSpeed specification version 1.013. Compliant with xHCI Specification Version 1.014. Backward compatible with USB2.0, USB1.1, USB1.015. Transmission rate: 5000/480/12/1.5Mbps16. Built-in small 4PIN enhanced power interface17. It needs to be plugged into the SATA power interface before it can work18. The expansion card uses a large capacitor, which greatly ensures the stability of the USB power supplyHardware requirements:1. A motherboard or notebook that supports MINI PCI-E2. This product is a MINI PCI-E expansion card. It needs to have a free MINI PCI-E slot on the motherboard before it can be installed and used. It cannot be installed and used on the other PCI slot. Do not insert it into the PCI slot.Notice:1. The riser card can reach 370-400M/S above PCI-E2.0, and can reach 120-170M/S under PCI-E1.02. When purchasing, please confirm whether your riser card supports PCI-E2.0 or above

    200.27 kr

  • PCI-E X16 to M.2 M-key NVME X4 SSD RAID Array Expansion Adapter Support 2242/2260/2280/22110(PH44Plus)-garmade.com

    PCI-E X16 to M.2 M-key NVME X4 SSD RAID Array Expansion Adapter Support 2242/2260/2280/22110(PH44Plus)

    1. Using high-quality PCB circuit board, gold-plated surface, good conductivity, strong wear resistance, anti-oxidation, high fire rating2. Support 4 X4 full-channel full-speed NVME SSDs and M.2 PCI-E interface devices3. LED soft light indicator light, when the disk is plugged in and powered on, the green light is on, and the green light flashes when reading and writing4. Two-speed turbo fan, heat dissipation on both sides at the same time, more stable transmission5. Equipped with full-height/half-height baffles, which can support the installation of 2U server small chassis6. Compatible with 2242/2260/2280/22110 specifications7. Support M.2 M-KEY NVME protocol SSD and Optane8. Expansion cards and devices supporting M.2 PCI-E protocol9. Support hard disk: M.2 NVME protocol SSD/M.2 PCI-E device10. Transmission speed: 4 x 32Gbps11. Weight: about 92.3 grams12. Packing: cowhide box packingPacking list:-Riser card x 1-Lock plate screw x 4-Mobile stud x 4-Chassis screw x 1-Full height bezel x 1-Half height bezel x 1-Screwdriver x 1

    295.29 kr

Parts of the Computer System

Have you ever found yourself saying, "I could use a new computer part, like, right now?"
We get it. Sometimes the best computer components are hard to find, and you can't always find them in one place. That's why we're here to provide everything you need in one place.
And we don't just have random stuff lying around. The inventory in our computer parts online store is carefully curated to ensure that each item we carry is the best of its kind. We know that you need more than just a "good" product. You need an amazing product that will make your friends jealous when they see it. From HDMI ports to programmable gaming mice and chargers to network extenders and everything in between, our computer accessories & parts shop has it all. We also have translucent keycaps in case you're looking for an alternative keyboard that makes it easier to see the keys.

We understand that upgrading or building a computer can be overwhelming, but it doesn’t have to be. Our comprehensive selection of computer components is designed to meet all your needs, whether you're a casual user, a gamer, or a professional. We offer everything from motherboards and processors to power supplies and cooling systems, ensuring you can find the right parts for any project. Whether you're optimizing an old system or building a new one from scratch, our detailed product descriptions and knowledgeable staff are here to guide you through the process. We’re committed to making sure you get the best value for your money, with high-quality, reliable parts that will perform for years to come.
If you're looking for a place to start building your dream PC or just need some new parts for an existing system, look no further. And if you're unsure what exactly you need (or how much of it), don't worry. Our staff is friendly and knowledgeable. They'll help you find hardware parts of your computer without any fuss in our online shopping store.

Frequently Asked Questions

What Types of Computer Networking Products Does Garmade Offer?

Garmade presents its customers with various computer accessories ranging from routers to modems and switches up to Wi-Fi extenders and network adapters. Through its product range, Garmade gives users dependable networking solutions that meet requirements from home to office to gaming setups.

Do you provide products for gaming and high-performance networking?

The product line from Garmade includes high-performance networking devices built for gaming and professional tasks. The computer components lineup at Garmade includes gaming routers as well as Ethernet switches and Wi-Fi boosters which excel at minimizing latency and delivering swift connections.

What Are the Best-Selling Networking Accessories Available on Garmade?

Garmade achieves its success through high-speed routers, mesh Wi-Fi systems, powerline adapters and network cables as their best-selling networking accessories. The computer parts online extend connectivity and maintain reliable secure internet connections to handle multiple requirements.

How Long Does Shipping Take for Computer Networking Accessories?

The parts of computer system delivery durations depend on both recipient location together with shipping options selected by customers. The standard shipping option requires 3-7 business days but customers can choose expedited delivery which takes 1-3 days. The tracking information appears to customers after they finish their purchase.

What Is Your Return Policy for Computer Networking Equipment?

The return policy at Garmade enables customers to carry out easy returns for their hardware parts of computer. Customers can return unutilized products with a 30-day period in order to obtain either a refund or an exchange. Customers need to return products using their original packaging while including every accessory.

Login

Forgot your password?

Don't have an account yet?
Create account