DJI & GoPro Accessories

1. Material: plastic2. For FIMI X8 SE 20203. Open the mold on the real machine without affecting the flight4. The installation is stable and fastened tightly5. Note: this product listing does not include drones

Read more less

Features1. Free your hands and make aerial flight easier, 2. A variety of styles are available, the hanging neck is comfortable, 3. Stainless steel screws, durable and anti-dropping, 4. It is comfortable to wear, the longest length can be adjusted to 70cm, and the adjustable buckle conforms to the wearing habits of different people.Specifications1. Material: Nylon cloth+aluminum alloy+stainless steel 2. Applicable models: For Mini 3 pro /Air 2S/Air 2/Mavic 2 Remote Control 3. Color: Black 4. Net weight: 133.7g 5. Product size: 56x4cm (fold in half), 40~70cm (adjustment range)Notes1. Does not include the Smart Controller, 2. Transition: 1cm=10mm=0.39inch, 3. Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering, 4. Due to the difference between different monitors, the picture may not reflect the actual color of the item, please make sure you do not mind before ordering, Thank you!

Read more less

Drone:1. 150 degree wide view to present the picture, 4K/60fps shooting, clear record2. High-definition and low-latency digital picture transmission, dual-band adaptive switching, stable signal sending and receiving, smooth flight3. Sport mode, simple control4. Can be used with DJI FPV flight glasses V2 and DJI FPV remote control5. High maneuverability, advanced flight gear6. Support 2.4GHz/5.8GHz dual-band adaptive switching, image transfer bit rate up to 50 Mbps, strong anti-interference ability, effectively reduce screen lag and dragging7. 4 antenna design, signal transmission stability8. Camera main camera element: 12 million9. Perception system: real-time image transmission quality 810p10. Image format: JPEG11. Wind speed resistance: up to 6 wind12. Body weight: about 795g13. Note: This drone is not all newBattery:1. Smart Flight battery has a rated capacity of up to 44.4 Wh, providing a strong endurance of about 20 minutes2. Built-in DJI intelligent battery management system, which can monitor and feedback the battery status in real time, with plenty of energy and intelligent guarding3. Battery capacity: 2000 mAh4. Nominal voltage: 22.2 V5. Charging limit voltage: 25.2 V6. Battery type: LiPo 6S7. Energy: 44.4 Wh@0.5C8. Discharge multiplier: Typical value 10C9. Charging ambient temperature: 5-40 degrees Celsius10. Charging power: 90W11. Weight: about 295g

Read more less

1. The Mavic Air 2 Intelligent Flight Battery provides a maximum flight time of 31 minutes for DJI Air 2S (34 minutes for Mavic Air 2).2. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real time, allowing you to focus less on power levels and more on flying.3. It also features overcharging and overdischarging protection as well as low-temperature protection.Specifications:1. Battery Type: Three-cell polymer lithium-ion battery2. Rated Capacity: 3750 mAh, 41.4 Wh (typical value)3. Rated Voltage: 11.04 V4. Charging Voltage Limit: 12.6 V5. Discharge Temperature: -10-60 Celsius (14 - 140 Fahrenheit)6. Charge Temperature: 5- 40 Celsius (23-113 Fahrenheit)7. Compatibility:-DJI Air 2S-Mavic Air 2

Read more less

Features1. Specially built for GoPro AHDBT-901 battery charging , suitable for GoPro Hero11 Black / HERO10 Black / HERO9 Black camera battery. 2. The two-channel charging with independent power supply can charge two batteries at the same time, and can independently manage the charging status to prevent overcharging, which is safe and secure; 3. Simple and easy-to-understand indicator light, the yellow light indicates charging, and the green light indicates full charge;. 4. DC charger, compared to the existing digital charger in the marketing, more security. 5. Can be used with mobile phone USB charging head, USB car charger, computer USB hole, mobile power, charging is not limited to the interior, also for travel charger. 6. Note: The showing batteries are not included.Package List1. Charger x 1 2. Micro USB Cable x 1

Read more less

1. Lightweight design will not bring excessive load to the aircraft2. Quick installation, convenient and practical, the frame is light and stable. The overall weight is only 20g, which can stably carry the body and be easily carried by the body without affecting battery life.3. Safer landing for Mini 3 aircraft4. Reduce the impact when landing and protect the gimbal camera5. Material: ABSPacking list:1. Tripod x 12. Instruction manual x 13. Blister x 14. Color box x 1

Read more less

1. Lightweight design will not bring excessive load to the aircraft2. Quick installation, convenient and practical, the frame is light and stable. The overall weight is only 19.5, which can stably carry the body and be easily carried by the body without affecting battery life.3. Safer landing for Mini 3 Pro aircraft4. Reduce the impact when landing and protect the gimbal camera5. Material: ABSPacking list:1. Tripod x 12. Instruction manual x 13. Blister x 14. Color box x 1

Read more less

1. The material is aluminum alloy, the thickened tube body design has strong load-bearing capacity; the overall tube body adopts anodic oxidation process, and the hot-melt pattern handle design takes into account the quality and appearance, and feels comfortable to hold; 2. The main body is a 5-section telescopic rod, with a height of 65.5cm after contraction and a height of 300cm after stretching; 3. Eccentric tube design, the length can be stretched freely, and each section can be locked separately; 4. The base has a 1/4 screw hole, which can be connected to a triangle clip or an extension rod, and the top is a 1/4 screw, which can be connected to a camera, mobile phone clip or adapter, etc.; 5. It is suitable for Insta360 and other panoramic cameras, which can easily take 360-degree panoramic movies and freeze beautiful moments at any time;

Read more less

Features1. Restore the true color of the picture, clear vision, high-definition light transmission 2. Upgrade the compressive structure to effectively resist falling damage and sharp object scratches 3. Electroplating oil repellent layer, waterproof and oil proof, HD fingerprint proof 4. Feel good to the screen without film 5. No dust and no blocking screen, paste like no filmPackage List1. Tempered Glass Film x 2 2. Adhesive x 1 3. Lens Cloth x 1 4. Wet & Dry Wipes x 1

Read more less

1. Support 4K/60fps EIS image stabilization2. Support 2.4G wireless remote control3. Comes with WIFI function, can connect to mobile phone4. Multiple shooting modes5. Sensor: Sony 1796. WIFI: support mobile APP XDV7. Display: 2.0 inch IPS HD screen8. Secondary screen: 1.3-inch screen / long press the "down button" to switch9. Battery: 900mAh polymer lithium battery10. Battery life: about 60-90min11. Lens: 170° wide-angle 6 glass lenses12. Video pixels: 4K (3840*2160) 30fps, 2.7K (2688*1520) 30fps, 1080P (1920*1080) 120/60/30fps, 720P (1280*720) 240/120/60/30fps13. Photo resolution: Image 24MP(5648*4232), Image 20MP(5120*3840), Image 16MP(4608*3456), Image 13MP(4160*3120), Image 8MP(3264*2448)14. Storage: Micro SD card (maximum support 128GB)15. Data connection: TYPE-C/wifi16. Car mode: support17. Remote control function: support18. HDMI: Yes19. Video function: normal video, slow video, loop video, time-lapse video20. Function: support time-lapse video, slow motion, timing photo, time-lapse photo, support Selfie mode, etc.21. Application scenarios: extreme sports, outdoor sports, cycling, diving, driving records, etc.22. Language: Chinese, German, English, Spanish, French, Italian, Japanese, Korean, Portuguese, Russian, Thai, Traditional Chinese

Read more less

1. High-quality silicone case, specially designed for Insta360 GO 3 battery compartment.2. Not easy to deform, not easy to fade, long service life3. Made of flexible and soft silicone, soft and durable4. It helps protect the device from dust, smudges and scratches.5. Easy to install and remove, provide better protection for the camera.6. Note: The product is only a protective case, nothing else

Read more less

1. High quality silicone case, specially designed for Insta360 GO 3.2. Not easy to deform, not easy to fade, long service life3. Made of flexible and soft silicone, soft and durable4. It helps prevent dust, smudges and scratches on the camera.5. Easy to install and remove, provide better protection for the camera.

Read more less

1. 2.3mm ultra-thin transparent dome cover, the light transmittance is as high as 93%. Reproduction of the shooting environment, clear and colorful.2. The dome port can move the waterline away from the lens so that both surface and underwater images can be captured at the same time.3. Without front mesh, it will not reflect light on the dome cover and affect the image.4. 180-degree super wide-angle, 25% more viewfinder than the human eye5. 30m deep waterproof, no need to worry about underwater shooting6. The buoyancy rod has a storage function, which can be opened to store coins and keys7. Compatible models: For GoPro Hero11 Black / HERO10 Black / HERO9 Black8. Material: environmentally friendly PC resin, 316 stainless steel for marine use9. Weight: 420g10. Dimensions: 185 x 185 x 102mmPacking list:Lens water mask x 1Cap x 1Cleaning cloth x 1Buoyancy Rod x 1Trigger handle x 1Long screw x 1Anti-fog film x 1Wrench x 1Hand strap x 1

Read more less

1. Multi-layer coating filter, high transmittance and high light to restore the true color 2. Using professional optical glass lens, the image is clearer 3. Protect your expensive lens from dust and scratches without degrading photo quality. 4. Material: Aluminum alloy + optical tempered glass 5. CPL Filters: Increase color saturation, creating deep, rich scenic images. Helps to reduce the amount of light entering the lens.

Read more less

1. Exclusively for Action 4 sports camera, precise mold opening (compatible with Action 3), small size but large capacity2. High-quality PU leather fabric, inner Tolycra, exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. Lightweight and wear-resistant, easy to carry, and can also be directly stored in a backpack;5. The mountaineering bag is provided with a hanging buckle and a hand strap, which is convenient for carrying out (standard kit version); by adjusting the shoulder strap, the excess shoulder strap can be put into the hidden storage space in the bag, which can be easily turned into a handbag without affecting the appearance ; (full kit version)

Read more less

1. Special design for DJI Osmo Action 5 Pro / 4 / 3 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. High-quality alloy double sliders, two-way opening and closing smoothly without jamming2. Wear-resistant nylon shell, scratch-resistant, wear-resistant and splash-proof3. Plastic handle, easy to carry4. Capacity: It can store the body, RC-N1 or RC remote control, the original battery butler (not compatible with the sub-factory), 3 batteries (total 4 plus the body), the original filter box, joystick, paddle , charging head, data cable, etc.5. Compatible with: MINI 3/MINI 3 PRO6. Material: nylon + EVA liner pearl cotton7. Dimensions: about 27 x 27 x 11cm8. Weight: about 742g

Read more less

1. External silicone protective cover, effective anti-dust, anti-scratch, so that the use and storage more worry-free.2. Surface reinforced ribbed design, can be kneaded at will, not easy to change shape.3. The surface is sprayed with hand feeling oil, beautiful and comfortable to touch.4. Accurate hole position, and the camera just the right blend.5. Flexible and elastic, easy to remove and install.6. Material. Silicone.7. Applicable models: Applicable to Insta360 X38. Net weight: 15.2g9. Product size: 11.4 x 4.7 x 2.4cm (after installation size)Packing list:1 silicone case1 hand strap

Read more less

Features1. A protective frame specially designed for the Insta360 GO3 body. 2. The material is high-quality plastic, which is strong and durable, and can effectively protect the camera accessories from bumps; 3. Lightweight and portable, smooth frame design, easy to install and disassemble; 4. With a 1/4 screw hole adapter and a short screw, it can be connected to a tripod or a selfie stick, and the camera can be used in various scenarios such as cycling, skiing, hiking, etc.; 5. Note: Frame, movable base and short screw are included, camera is not included.

Read more less

Features1. Made of high quality PC and ABS, provides a light and compact case for DJI Osmo Action 5 Pro / 4/3 2. Offer cold shoe to mount more accessories on your device, such as on-camera lights, shoe handles, microphone and so on. 3. This housing side frame can provide for your camera, can withstand slight impact, protect the camera from damage and wear, and keep the camera as new as ever. 4. Provide without affecting the use of the original button. Side opening hole gives your an easy access to all ports and buttons, which is easy to use. 5. Easy to install, mount adapter is included for flexibility. The installation is simple and does not require complicated operations, save and effort.Package List1. Body Frame x 1 2. Quick Release base x 1 3. Long screw x 1

Read more less

1. Specifically designed for DJI Mini 4 Pro, it has a stylish appearance, small size but large capacity. It can also store the aircraft and a full set of accessories (both remote controls can be used);2. Made of high-quality EVA + high-density sponge lining, precision processing, precise fit, hardness and flexibility, which can better protect your items;3. Highly tight and waterproof, can withstand repeated water spray tests and is durable;4. The portable handle has strong load-bearing capacity, feels comfortable and does not tighten the hand, and relieves hand pressure. It can also be worn cross-body and the length can be adjusted freely;5. Material: ABS+EVA+high-density sponge6. Size: 35.3x26.2x11.4cm7. Weight: 1569.8g

Read more less

Features1. An expansion bracket specially designed for DJI AIR 3. Various components can be installed through the 1/4 threaded port, such as action cameras, megaphones, owl searchlights, etc., and fill lights can be installed through the cold shoe openings on both sides (both sides are required Install them at the same time, otherwise it will affect flight stability). 2. Made of high-quality lightweight ABS material, it is wear-resistant and durable and will not affect the normal flight of DJI AIR 3. 3. Built-in silicone material, no need to worry about damaging or scratching the drone. 4. The installation is very simple, no other tools are required, and it can be quickly assembled and disassembled with its own screws. 5. An adapter suitable for GoPro and 1/4 double-head screws will be provided.Package List1. Extension bracket x 1 2. Instructions x 1 3. 1/4 double-headed screw x 1 4. Silicone pad x 2 5. Fixing screw x 1 6. Thumb screw x 1 7. Adapter for GoPro x 1

Read more less

1. Can be bent at any angle at any angle: Silicone protective layer on the outside, soft and non-slip, stainless steel gooseneck + aluminum strip on the inside, soft yet rigid and not easy to break. 2. Ergonomic wearing: The streamlined shape conforms to the contours of the human body, feels silky, fits the neck, and is comfortable to wear for a long time. 3. Unlock the POV perspective: Using a hanging neck stand to shoot has a stronger sense of immersion than hand-held shooting, bringing you visual shock. 4. Experience different shooting modes: Multi-angle adjustment to free your hands to meet the needs of various shooting angles. The fully closed collar helps you run and jump with confidence. 5. Wide compatibility: Compatible with most action cameras and mobile phones on the market 6. Material: ABS, environmentally friendly silicone, stainless steel

Read more less

1. High-quality environmentally friendly silicone protective case, effectively anti-fall, anti-shock, anti-scratch, reducing damage, making use and storage more worry-free. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. The surface is sprayed with oil, which is as moist as baby skin, beautiful and comfortable. 4. The precise hole position and the remote control are just right, harmonious and beautiful, without affecting the flight control. 5. Flexible and elastic, easy to disassemble and assemble. Warmth tips: This product only contains a silicone protective case and does not include the RC 2 remote control shown in the picture.

Read more less

Features1. Made of high quality ABS material, durable and sturdy 2. Suitable for DJI Mini 4 Pro 3. Small size and lightweight, only 13g, without any impact on flight performance 4. Effective protect camera when quadcopter need landing on rough ground outdoor 5. Effectively raise 20mm to avoid ground debris from contaminating the body and damaging the gimbal during take-off and landing 6. Non-destructive quick disassembly design, simple disassembly, no need to worry about damaging the fuselage. 7. Note: drone and its Accessories are not included in packageSpecifications1. Material: ABS+PC 2. Size: 10.3*9*4.4cm 3. Weight: 13g

Read more less

Features1. Tempered glass film, high definition and high transmittance. 2. Rub-proof and scratch-proof, effectively protects OSMO Pocket 3. 3. Ultra-thin and high transmittance, nondestructive image quality 4. Accurate size, good match. 5. 1pc lens film + 1pc screen film for DJI OSMO Pocket 3.Package List1. Screen Film x 1 2. Lens Film x 1 3. Dry & Wet Wipes x 1 4. Cleaning Cloth x 1 5. Paper Card Bag x 1

Read more less

Features1. Design for Insta360 X3, made of aviation aluminum alloy, strong and durable; 2. Compact and lightweight design, easy to carry and will not add extra burden to shooting; 3. Effectively protect the camera from falling and collision; increase the heat dissipation of the camera to prevent the camera from overheating and crashing; 4. Bring a pair of lens protective glasses to effectively prevent the camera lens from being scratched; the protective mirror is an adhesive design, which is more convenient to install and remove. It has high light transmittance and does not affect shooting; 5. The bottom has a 1/4 inch screw hole or mounting base, which can be connected to a tripod or selfie stick; 6. With hexagonal screwdriver, easy to install or remove;Material Specifications1. Protective shell: Aluminum alloy 2. Protective mirror: Acrylic plexiglassPackage List1. Cage main body x 1 2. Base adapter x 1 3. Installation screws x 4 4. Adhesive lens goggles x 2 5. Double-sided sticker x 4 6. Lens cloth x 1 7. Triangular pry tool x 1 8. Hex screwdriver x 1

Read more less

Features1. Made of high-quality silicone, specially designed for DJI OSMO Pocket 3; 2. Includes body protective cover, lens protective cover, and touch screen protective cover, providing comprehensive protection for DJI OSMO Pocket 3; 3. The silicone sleeve is strong and durable and can be used for a long time; 4. It can effectively protect the camera and reduce dust, stains and scratches on the equipment; 5. Easy to install and disassemble, the silicone cover is easy to clean and washable; 6. A good choice for every photographer or outdoor activity enthusiast.Package List1. Body protective case x 1 2. Lens protective cover x 1 3. Touchscreen protective cover x 1

Read more less

Features1. Made of high-quality silicone, specially designed for DJI OSMO Pocket 3; 2. Includes body protective cover, lens protective cover, and touch screen protective cover, providing comprehensive protection for DJI OSMO Pocket 3; 3. The silicone sleeve is strong and durable and can be used for a long time; 4. It can effectively protect the camera and reduce dust, stains and scratches on the equipment; 5. Easy to install and disassemble, the silicone cover is easy to clean and washable; 6. A good choice for every photographer or outdoor activity enthusiast.Package List1. Body protective case x 1 2. Lens protective cover x 1 3. Touchscreen protective cover x 1

Read more less

Features1. Made of high-quality silicone, specially designed for DJI OSMO Pocket 3; 2. Includes body protective cover, lens protective cover, and touch screen protective cover, providing comprehensive protection for DJI OSMO Pocket 3; 3. The silicone sleeve is strong and durable and can be used for a long time; 4. It can effectively protect the camera and reduce dust, stains and scratches on the equipment; 5. Easy to install and disassemble, the silicone cover is easy to clean and washable; 6. A good choice for every photographer or outdoor activity enthusiast.Package List1. Body protective case x 1 2. Lens protective cover x 1 3. Touchscreen protective cover x 1

Read more less

1. Made of high-quality ABS plastic material, durable, wear-resistant, and can be used for a long time; 2. It can protect the fuselage well and prevent collisions and falls; 3. It has certain heat dissipation performance, which can effectively reduce the camera from overheating and crashing; 4. The protective frame has 2 cold shoe openings, which can be connected to fill lights, microphones, etc.; 5. The 1/4 screw hole in the base can be adapted to a bracket, handle or selfie stick; 6. There is a dual interface base for sports cameras on the back, which can be connected to backpack clips, helmet chin brackets, etc.

Read more less

1. Lens hood reduces interference from strong light and protects the lens from collision with foreign objects when shooting. 2. High-quality ABS material, fine workmanship and good texture 3. Lightweight design, easy to install and disassemble, 4. Precise mold opening and body-fitting design will not affect startup or gimbal rotation. 5. Expanded opening design ensures light-blocking effect without affecting lens shooting. Warm reminder: After installation, turn on the camera and adjust the gimbal. Try to select FPV mode, otherwise it may affect shooting.

Read more less

1. Specially designed protective floating case for Insta360 Ace / Ace Pro. 2. Bright colors are easy to spot in water. 3. It is specially designed to protect your action camera while still allowing easy access to the shutter button. 4. Floating is perfect for hassle-free shooting in and around the water during surfing, snorkeling, wakeboarding, and more. 5. Note: The camera shown is not included

Read more less

Features1. Suitable for DJI Osmo Action 4/3 action camera; 2. Made of high-quality aluminum alloy material and CNC process, the product is durable and textured; 3. It can protect the camera well and prevent camera collision; it has good heat dissipation performance and prevents the camera from collapsing due to overheating; 4. Universal adapter, easy to install and remove; 5. Wide compatibility. There are 1/4-inch screw holes for easy connection of selfie sticks, handles, and tripods; there is a DJI original magnetic adapter interface at the bottom; 6. The cold shoe opening on the frame can be expanded to connect microphones, fill lights, etc.Package List1. Metal Frame x 1 2. Adapter x 1 3. Adapter Screw x 2 4. Hex Wrench x 1

Read more less

Features1. Protective frame specially designed for Insta360 Ace Pro action camera. The material is made of high-quality plastic, which is strong and durable and can effectively protect the camera accessories from being bumped; 2. Hollow design, the power button, unlock button, sound pickup port, and speaker are not blocked; 3. Lightweight and portable, smooth frame design, easy to install and disassemble; 4. The bottom has a movable base and a long screw, which can be connected to a sports camera movable base or a selfie stick. The camera can be used in various scenarios such as cycling, skiing, hiking, etc.; 5. There is a cold shoe opening on the side of the frame for easy expansion and connection of fill lights, microphones, etc.; 6. The frame does not block the screen, making it stress-free to take selfies when flipping the screen;Package List1. Plastic Cage Frame x 1 2. Quick Release Buckle Base x 1 3. Long Screw x 1

Read more less

Features1. High-quality silicone case, specially designed for Insta360 Ace Pro action camera; 2. Made of flexible and soft silicone, skin-friendly and comfortable, soft and durable; 3. Includes a silicone cover for the battery compartment and a body lens cover to provide comprehensive protection for the camera. Helps protect camera from dust, smudges and scratches; 4. Easy to install and remove, providing better protection for the camera; 5. There is a magnetic adapter interface at the bottom, which does not affect the use of the magnetic quick-release base.Package List1. Body protective case x 1 2. Lens cap x 1

Read more less

1. One-touch switch, support brightness adjustment, provide long-distance lighting and searching2. Flashing bright light, support the adjustment of strobe brightness and flashing frequency3. Controllable PTZ, support PTZ 0 - 85 degrees control, support PTZ and camera linkage4. Interface: SDK interface5. Lighting power: 30W6. Protection level: IP4X7. Support models: for DJI Mavic 3E / Mavic 3T8. Lighting mode: combined lighting9. Lighting angle: 14 degrees10. Head: single-axis stabilized gimbal11. Mounting method: quick release screws12. Operating temperature: -10 - 50 degrees Celsius13. Illumination distance: about 50m, 100m, 150m14. Center illumination: 24Lux, 5Lux, 2.5Lux15. Battery capacity: 1500mAh16. Charging port: Type-C17. Size: about 13.2 x 4.3 x 6.4cm18. Weight: about 110g19. Note: North America can not be used

Read more less

Features1. Suitable for DJI OSMO Pocket 3 pocket gimbal camera; 2. Made of high-quality aluminum alloy material and CNC process, the product is durable and textured; 3. Provide solid protection for the gimbal camera to prevent damage to the camera due to collision; good heat dissipation performance to prevent the camera from collapsing due to overheating; 4. The protective case has 2 cold shoe openings, which can be expanded to connect fill lights, microphones, etc.; 5. Universal adapter, easy to install and remove; 6. Wide compatibility. There is a 1/4-inch screw hole at the bottom, and an adapter can also be installed to facilitate the connection of photography heads, selfie sticks, handles, tripods, etc.Package List1. Metal frame x 1 2. Adapter x 1 3. Screws x 6 4. Allen key x 1

Read more less

1. Adopt optical tempered glass with a hardness of 9H, anti-scratch, anti-drop, and dust-proof, effectively protect the camera lens, avoid the camera from being scratched and scratched, without fear of scratching 2. The light transmittance of the lens material is close to 92%, and the AR coating layer is applied to increase the light transmittance of the lens to more than 99%. 3. The lens is coated with a waterproof film layer, and the dripping angle reaches 115 degrees, and no water droplets remain on the lens surface to affect the shooting effect 4. Adhesive arrangement is adopted, easy to install and disassemble 5. This protective mirror can be used with the metal frame on the market at the same time 6. Applicable models: Suitable for Insta360 X3 Precautions: 1. Please make sure the lens used for the camera is clean and dry before use. 2. After removing the X3 lens guard, apply new adhesive before putting it back on the X3. 3. The lens guard of the X3 is splash-proof, but not designed for underwater use. Please use a diving suit for underwater shooting. 4. To remove the X3 lens guard, use the provided pry tool. Be careful not to scratch the lens when removing the lens hood.Package List1. Adhesive lens goggles x 2 2. Double-sided Adhesive tape x 4 3. Lens cloth x 1 4. Triangular pry tool x 1 5. Alcohol pack x 2

Read more less

1. The DJI Avata 2 ND Filters Set includes ND8, ND16, and ND32 filers.2. By selecting the appropriate filter, you gain more freedom in controlling the aperture and shutter speed, capturing stunning shots like motion blur.3. Dimensions (single filter): 26×24 mm (L×W)4. Weight (single filter): Approx. 0.7 g5. Compatibility:DJI Avata 2Packing list:ND8 Filter × 1ND16 Filter × 1ND32 Filter × 1

Read more less

1. Made of aviation metal materials, CNC processed, light and strong 2. The real machine has holes that do not block the buttons, battery compartment, and sound pickup holes. It completely avoids the side buttons and does not block any holes and buttons on the camera. 3. With a cold shoe mount on the top, it can be seamlessly connected to a microphone, fill light, selfie stick, tripod, etc. 4. Precise fit, panoramic camera precise fit, easy installation, all-round fit, protecting the camera from damage 5. No tools are required for disassembly and assembly by bare hands. The camera is placed directly from the top of the rabbit cage without any tools and can be installed by hand without shaking. 6. Magnetic foldable base: Magnetic interface at the bottom. The bottom is magnetically designed for GoPro interface. There is a 1/4 interface in the middle, which is compatible with most tripods.

Read more less

1. Material: ABS, environmentally friendly silicone, stainless steel2. Suitable for neck circumference: 36~52cm (60cm long)3. Strong magnetic suction, fast and tight adsorption, convenient and stable without falling off4. 360-degree rapid adjustment at any angle, freeing your hands to meet the needs of various shooting angles5. 180-degree flip back and forth to meet the shooting needs of the front and rear cameras of mobile phones6. The shoulder and neck fit naturally and firmly, are soft and skin-friendly, and are comfortable to wear for a long time. The fully closed collar helps you exercise with peace of mind.7. Skin-friendly protective layer, safe and odor-free, built-in metal stainless steel gooseneck that can be bent at will, soft yet strong, well shaped and not easy to break8. Net weight: 322g9. Size: 300x195mmPacking list:- Magnetic mobile phone hanging neck x 1- For gopro -GoPro adapter x 1- Cleaning set ×1- Safety rope x1- Color box x1- Magnet sheet x 2

Read more less

1. Material: ABS, environmentally friendly silicone, stainless steel2. Suitable for neck circumference: 36~52cm (60cm long)3. Strong magnetic suction, fast and tight adsorption, convenient and stable without falling off4. 360-degree rapid adjustment at any angle, freeing your hands to meet the needs of various shooting angles5. 180-degree flip back and forth to meet the shooting needs of the front and rear cameras of mobile phones6. The shoulder and neck fit naturally and firmly, are soft and skin-friendly, and are comfortable to wear for a long time. The fully closed collar helps you exercise with peace of mind.7. Skin-friendly protective layer, safe and odor-free, built-in metal stainless steel gooseneck that can be bent at will, soft yet strong, well shaped and not easy to break8. Net weight: 322g9. Size: 300x195mmPacking list:- Magnetic mobile phone hanging neck x 1- For gopro -GoPro adapter x 1- Cleaning set ×1- Safety rope x1- Color box x1- Magnet sheet x 2

Read more less

Features1. Suitable for Insta360 X4, aviation aluminum alloy material, sturdy and durable; 2. Compact and lightweight design, easy to carry, will not add extra burden to shooting; 3. Effectively protect the camera, anti-drop and anti-collision; increase the heat dissipation of the camera to prevent the camera from overheating and crashing; 4. With lens protector, it can effectively prevent the camera lens from being scratched; high light transmittance does not affect the shooting; 5. The bottom has a 1/4 screw port or a mounting base, which can be connected to a tripod or selfie stick; 6. With hexagon screwdriver, easy to install or remove;Package List1. Protective cage x 1 2. Protective lens x 2 3. Dock adapter x 1 4. Mounting screws x 4 5. Hexagon screwdriver x 1 6. Cleaning cloth x 1 7. Carrying bag x 1

Read more less

1. Multi-layer coating filter, high transmittance and high light to restore the true color2. Using professional optical glass lens, the image is clearer3. Protect your expensive lens from dust and scratches without degrading photo quality.4. Material: PC + optical glassFeatures of different filters:1. UV filter: Suitable for shooting in the seaside, mountains, snowfields and open areas, etc. It can reduce the blue tone caused by ultraviolet rays. At the same time, for the camera, it can also eliminate the interference of ultraviolet rays on the camera lens, which helps to improve the effect of sharpness and color reproduction.2. ND Filter: You can get more freedom to control aperture and shutter, bring more exposure methods and creative space for photography creation, and effectively prevent overexposure. The number behind ND represents the ability of the ND mirror to block light.(Note: Not all model type and styles include the above features, you can choose filter styles according to different effects)

Read more less

1. Suitable for DJI Osmo Action 4 action camera 2. Made of high-quality aluminum alloy metal material, which is durable, lightweight and portable; the surface of the base is made of non-slip silicone to prevent camera wear and tear and firmly fix the camera 3. Easy to install and disassemble. Built-in strong magnets, the quick-release base and the camera are instantly adsorbed into place. The magnetic suction and limit design to secure the camera firmly; the camera can be disassembled by lightly pressing the claw release buttons at both ends at the same time. 4. Small size and strong compatibility. The protective frame, rabbit cage and silicone cover 5. The base is a universal adapter with 1/4 inch interface, widely compatible with selfie sticks, handles, tripods, etc. Warm reminder: The camera is only for scene display and is not included.

Read more less

Features1. The extender lens suitable for DJI Mini 4 Pro is multi-layer coated, waterproof, scratch-proof, dust-proof, and oil-proof, protecting your DJI Mini 4 Pro lens from all-round damage. At the same time, the extender lens helps you capture a wider high-definition field of view, expanding the viewing angle range of the photo mode from 82.1 degrees to 110 degrees, and expanding the viewing angle range of the video recording mode (16:9) from 75 degrees to 95 degrees, allowing you to capture the vast scenery with a large viewing angle. , which makes your world bigger, wider and brighter, allowing you to take stunning landscape photos or selfies and capture more moments in every frame. 2. Each intensifier lens is made of high-definition optical glass, which has no impact on image quality. It has been ground and polished many times to form a low refractive index, ensuring the restoration of the true color of the image to achieve color-accurate photo shooting. 3. The aircraft-grade aluminum frame is laser-engraved with a matte black finish to prevent light leakage or ghosting, ensuring each filter has been rigorously tested and will not add extra burden to your gimbal or interfere with Mini 4 For normal shooting of Pro, the weight is only 5 grams. 4. Snap-on design, quick to install, can be tightly fixed on Mini 4 Pro and will not fall off during shooting. 5. Each extender is equipped with a filter box, which is convenient for storage and protects the extender, making it hassle-free to carry.Specifications1. Material: Aluminum alloy + glass + PC plastic 2. Size: 22.6x17.7x11mm 3. Weight: 5.2gPackage List1. Magnifier x 1 2. Dust-free cloth x 1 3. Storage box x 1 4. Color box x 1

Read more less

1. Ideal for reducing wind noise when recording high-speed activities or windy environments. 2. Protect the camera body from scratches, fingerprints, dirt, etc. 3. Exquisite cutout allows you to easily access all function ports and buttons, battery door, memory card, lens, etc. 4. Thin, durable, washable, protective and fit. 5. Made of high-density environmentally friendly sponge, which has strong elasticity and is not afraid of deformation. 6. Specifically designed for use with Insta360 Ace Pro / Ace action camera.

Read more less