DJI & GoPro Accessories

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. POV first-person perspective, button open simple to wear2. Enclosed design is stable and not easy to fall off3. 180 degree bend, can be adjusted according to the neck of different people, long time wear without pressure4. Suitable for Gopro full series/Insta360 full series/OSMO Action/OSMO Pocket/Sony/XiaoMi and other sports cameras smartphones5. Material: ABS, silicone, stainless steel6. Size: 250 x 180mm7. Suitable for neck circumference: 30-45cm (upper limit 47mm)8. Net weight: 166g

Read more less

1. POV first-person perspective, button open simple to wear2. Enclosed design is stable and not easy to fall off3. 180 degree bend, can be adjusted according to the neck of different people, long time wear without pressure4. Suitable for Gopro full series/Insta360 full series/OSMO Action/OSMO Pocket/Sony/XiaoMi and other sports cameras smartphones5. Material: ABS, silicone, stainless steel6. Size: 250 x 180mm7. Suitable for neck circumference: 30-45cm (upper limit 47mm)8. Net weight: 166g

Read more less

1. Compatible with a variety of GoPro action camera series, POCKET 2/1, action camera series, Fimi Palm 2/1, OSMO ACTION, searchlight, fill light, etc.2. The screw is fixed and the buckle is hooked tightly to the heat dissipation hole of the fuselage, so that it will not fall when violently bumping3. Lined with sponge strips to protect the fuselage from scratches4. Triangular design, more stable5. Equipped with thumb screws, easy to disassemble and assemble6. Product size: 7 x 7 x 2 cm7. Product net weight: 20.6 grams

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. Professional screwdriver set, professional design, suitable for almost all DJI drones2. The design of the rotating disc at the top makes it feel comfortable and easy to unscrew the screw3. Using chrome vanadium steel batch head, high hardness and not easy to slip, aluminum alloy handle, anti-rust, beautiful and light4. Magnetic suction design, more convenient to replace the bit5. Aluminum alloy handle, anti-rust and beautiful, light and easy to carry6. Leather storage bag, beautiful and elegant, built-in bit buckle, easy to store7. Storage bag size: 10.5 x 6.6 cm8. Weight: about 120 grams/set (including storage bag)

Read more less

1. POV first-person perspective, button open simple to wear2. Enclosed design is stable and not easy to fall off3. 180 degree bend, can be adjusted according to the neck of different people, long time wear without pressure4. Suitable for Gopro full series/Insta360 full series/OSMO Action/OSMO Pocket/Sony/XiaoMi and other sports cameras smartphones5. Material: ABS, silicone, stainless steel6. Size: 250 x 180mm7. Suitable for neck circumference: 30-45cm (upper limit 47mm)8. Net weight: 166g

Read more less

1. Center vertical adapter for GoPro, supports 360 degree rotation.2. Plastic material, light weight and durable.3. Suitable for Insta360 /GoPro/DJI Action 2 etc.4. Smooth surface, sturdy and beautiful, wear-resistant and corrosion-resistant, not easy to rust.5. Mechanical processing, fine trimming, no burr. Make it easy to install and disassemble.6. Material: ABS material

Read more less

1. POV first-person perspective, button open simple to wear2. Enclosed design is stable and not easy to fall off3. 180 degree bend, can be adjusted according to the neck of different people, long time wear without pressure4. Suitable for Gopro full series/Insta360 full series/OSMO Action/OSMO Pocket/Sony/XiaoMi and other sports cameras smartphones5. Material: ABS, silicone, stainless steel6. Size: 250 x 180mm7. Suitable for neck circumference: 30-45cm (upper limit 47mm)8. Net weight: 166gSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 27cm * 19cm * 6cm / 10.63inch * 7.48inch * 2.36inch Qty per Carton 102 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 102 pcs = 18054 pcs 40HQ: 412 cartons * 102 pcs = 42024 pcs

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. This product is specially made for Insta360 X3 camera. It is made of highly transparent material, and the transparency can reach 93%-96%. (Shooting can place a contrast effect: bare metal shooting and shooting with a protective cover) 2. Prevent the lens from being scratched, dust-proof, drop-proof and wear-resistant. (The anti-drop effect is reflected when taking pictures, such as falling from high altitude or high place, the anti-drop effect is shocking) 3. No need to disassemble and shoot, take pictures, and protect both. 4. Easy to install, once pressed in place, quick to disassemble, just pull and snap. 5. Shoot 1-2 groups to show that it can be used with the silicone case: the effect of the transparent protective cover and the silicone case can be different. 6. Material: PC 7. Dimensions: 5.25 x 4 x 3.5cm 8. Weight: 4.4g

Read more less

1. POV first-person perspective, button open simple to wear2. Enclosed design is stable and not easy to fall off3. 180 degree bend, can be adjusted according to the neck of different people, long time wear without pressure4. Suitable for Gopro full series/Insta360 full series/OSMO Action/OSMO Pocket/Sony/XiaoMi and other sports cameras smartphones5. Material: ABS, silicone, stainless steel6. Size: 250 x 180mm7. Suitable for neck circumference: 30-45cm (upper limit 47mm)8. Net weight: 166g

Read more less

1. The buoyancy rod can provide buoyancy for the drone, and can easily take off and land on the water surface2. Increase the buoyancy rod of the tripod to effectively increase the height by 60mm to avoid damage to the fuselage and gimbal in an uneven ground environment3. The weight of the tripod + buoyancy rod is only 32 grams, which will hardly increase the flight burden4. It is fixed with a nylon cable tie buckle, easy to disassemble and reusable5. Install the buoyancy stick only to take off and land on the calm water surface, not on the water surface with waves, otherwise there will be a danger of overturning6. Product size: 24 x 5 x 8 cm7. Product weight: 32 grams8. Note: Due to the large volume of the floating tripod, it will increase the overall wind area of the aircraft after installation, so it is not suitable for flying at high altitudes or in windy environments!Packing list:-Tripod x 2-Buoyancy Rod x 2-Wire tie x 8

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Restore the true color of the picture, clear vision, high-definition light transmission 2. Upgrade the compressive structure to effectively resist falling damage and sharp object scratches 3. Electroplating oil repellent layer, waterproof and oil proof, HD fingerprint proof 4. Feel good to the screen without film 5. No dust and no blocking screen, paste like no film

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Fully suitable for Insta360 X3 action camera. 2. Durable and usable, anti-surf pressure will not damage its photographic effect. 3. Made of high transparency corrosion resistant PC + glass material, high transmittance. 4. Protecting the tightness of the shell, not only better waterproof, but also more effective to prevent small dust into the camera. 5. 30 meters full body underwater waterproof design, ideal for diving, snorkeling, swimming and other water sport activities. 6. Waterproof ring material: amorphous high-activity silica gel 7. Material of connecting shaft between main body and back cover: high hardness 304 stainless steel 8. Button material: Silicone

Read more less

Features1. Charging indicator, when the charger is powered, battery in socket CH1/CH2/CH3, CH1/CH2/CH3 lights on. 2. This product is a patented product. 3. Adopt microcomputer digital chip intelligent charging, overcurrent protection, overcharge protection, protection against short circuits. 4. DC charger, compared to the existing digital charger in the marketing, more security. 5. Can be used with mobile phone USB charging head, USB car charger, computer USB hole, mobile power, charging is not limited to the interior, also for travel charger. 6. Note: The showing batteries are not included.Specifications1. Charging interface: Type-C 2. Charging time: 90 minutes 3. Support adapter voltage and current: 12V 3A / 9V 3A / 5V 3A 4. Size: 75 x 61 x 31mm 5. Weight: 50g

Read more less

Features1. Power clamp adopts high quality plastic, bracket link rod is aluminum alloy material, strong and durable; 2. Modular design, easy to install and disassemble; 3. Strong clip to support 1.5-4cm range of caliber handlebars or bars; 4. Bracket universal ball head design, can adjust a variety of shooting angles; 5. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.; Can also be used to link the installation of vehicle navigationSpecifications1. Crab Clamp: ABS 2. Link Rod: Aluminum alloyPackage List1. Handlebar bracket x 1 2. Long screw x 1 3. Adapter base x 1

Read more less

Features1. Aluminum alloy material, strong and durable; 2. Modular design, easy to install and disassemble; 3. Two kinds of silicone pads, suitable for different diameters of handlebars or bars; 4. Bracket universal ball head design, can adjust a variety of shooting angles; 5. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.; Can also be used to link the installation of vehicle navigationSpecifications1. Support material: Aluminum alloy 2. Long screw and adapter: ABS+ aluminum alloyPackage List1. Handlebar bracket x 1 2. Link silicone pad x 2 3. Long screw x 1 4. Adapter base x 1

Read more less

1. Material: aluminium, optical glass2. For DJI Mavic 3 Classic3. Double-sided super waterproof coating, anti-dirt and anti-scratch, effective protection4. Precision grinding treatment, high definition sharpness, meet the needs of professional photography5. Ultra-light, rugged and corrosion resistant, CNC machined, no impact on gimbal calibration and flight stability6. Infinitely adjustable gears, precise adjustment of shutter speed, control exposure7. Eliminate the square original defendant to increase the saturation, enhance the contrast, the picture more three-dimensional and transparent8. Eliminate harmful non-metallic reflective light, increase colour concentration9. Does not affect the colour balance of the picture, only light reduction, almost no colour bias10. Size: 36.7x35x4.7mm

Read more less

1. Material: aluminium, optical glass2. For DJI Mavic 3 Classic3. Double-sided super waterproof coating, anti-dirt and anti-scratch, effective protection4. Precision grinding treatment, high definition sharpness, meet the needs of professional photography5. Ultra-light, rugged and corrosion resistant, CNC machined, no impact on gimbal calibration and flight stability6. Infinitely adjustable gears, precise adjustment of shutter speed, control exposure7. Eliminate the square original defendant to increase the saturation, enhance the contrast, the picture more three-dimensional and transparent8. Eliminate harmful non-metallic reflective light, increase colour concentration9. Does not affect the colour balance of the picture, only light reduction, almost no colour bias10. Size: 36.7x35x4.7mm

Read more less

1. Material: aluminium, optical glass2. For DJI Mavic 3 Classic3. Double-sided super waterproof coating, anti-dirt and anti-scratch, effective protection4. Precision grinding treatment, high definition sharpness, meet the needs of professional photography5. Ultra-light, rugged and corrosion resistant, CNC machined, no impact on gimbal calibration and flight stability6. Infinitely adjustable gears, precise adjustment of shutter speed, control exposure7. Eliminate the square original defendant to increase the saturation, enhance the contrast, the picture more three-dimensional and transparent8. Eliminate harmful non-metallic reflective light, increase colour concentration9. Does not affect the colour balance of the picture, only light reduction, almost no colour bias10. Size: 36.7x35x4.7mm

Read more less

1. Material: aluminium, optical glass2. For DJI Mavic 3 Classic3. Double-sided super waterproof coating, anti-dirt and anti-scratch, effective protection4. Precision grinding treatment, high definition sharpness, meet the needs of professional photography5. Ultra-light, rugged and corrosion resistant, CNC machined, no impact on gimbal calibration and flight stability6. Infinitely adjustable gears, precise adjustment of shutter speed, control exposure7. Eliminate the square original defendant to increase the saturation, enhance the contrast, the picture more three-dimensional and transparent8. Eliminate harmful non-metallic reflective light, increase colour concentration9. Does not affect the colour balance of the picture, only light reduction, almost no colour bias10. Size: 36.7x35x4.7mm

Read more less

1. Material: aluminium, optical glass2. For DJI Mavic 3 Classic3. Double-sided super waterproof coating, anti-dirt and anti-scratch, effective protection4. Precision grinding treatment, high definition sharpness, meet the needs of professional photography5. Ultra-light, rugged and corrosion resistant, CNC machined, no impact on gimbal calibration and flight stability6. Infinitely adjustable gears, precise adjustment of shutter speed, control exposure7. Eliminate the square original defendant to increase the saturation, enhance the contrast, the picture more three-dimensional and transparent8. Eliminate harmful non-metallic reflective light, increase colour concentration9. Does not affect the colour balance of the picture, only light reduction, almost no colour bias10. Size: 36.7x35x4.7mm

Read more less

1. Support almost all smartphones (for iPhone 4)2. Support 7.9 inch, 9.7 inch, 10.5 inch tablet PC3. 360 degree rotation, does not affect the use of the lanyard4. Adjustable length, 115mm-186mm adjustable5. Will not block the USB port, will not block the screen of the controller, will not block the data port of the smartphone6. Foldable, easy to carry and store7. Material: plastic8. Suitable for DJI Spark / DJI Mavic Pro / Air remote controlNote: The product is only the bracket, no others are included

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Air 25. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: plastic8. Weight: 5g

Read more less

1. The real machine mould, precise matching2. Installation is simple and easy to use3. The environmental protection material, using at ease4. For DJI Mavic 35. Repair accessories for replacement of accidental damage6. Long Life and easy installation7. Material: metal8. Weight: 20g

Read more less

About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1

Read more less

Features1. Restore the true color of the picture, clear vision, high-definition light transmission 2. Upgrade the compressive structure to effectively resist falling damage and sharp object scratches 3. Electroplating oil repellent layer, waterproof and oil proof, HD fingerprint proof 4. Feel good to the screen without film 5. No dust and no blocking screen, paste like no filmPackage List1. Tempered Glass Film x 2 2. Adhesive x 2 3. Lens Cloth x 2 4. Wet & Dry Wipes x 2

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. Made of high quality ABS plastic, rubber and aluminum alloy, durable and sturdy. 2. With a 360 swivel head at the end of the magic arm makes you a comfortable use when you need any angle of the device. 3. This precise and durable designed magic arm with locking control knobs to release or enlarge the tension which can give all position movement. 4. The suction mount is designed for a quick, secure way to mount your action camera to your desired area! 5. Simple and practical car mount suction cup, specially designed to attach your cameras on your car dashboard or windshield, for convenient to operate 6. Phone clamp suitable for 4.5 - 7.2 inch phones 7. Full length: 370mm, suction cup diameter: 70mm

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. Made of high quality material, durable. 2. This item is used with the camera or phone mount, like as helmet straps. 3. Made of high quality ABS and metal aluminum alloy material. 4. A good choice for your helmet. 5. Safely secure your camera or phone on a vertical wall surface like a car bumper, wall, back of helmet, or similar. 6. Perfect for skiing, snowboarding, surfing, any action sport.

Read more less

1. Made of high quality ABS plastic, rubber and aluminum alloy, durable and sturdy. 2. With a 360 swivel head at the end of the magic arm makes you a comfortable use when you need any angle of the device. 3. This precise and durable designed magic arm with locking control knobs to release or enlarge the tension which can give all position movement. 4. The suction mount is designed for a quick, secure way to mount your action camera to your desired area! 5. Simple and practical car mount suction cup, specially designed to attach your cameras on your car dashboard or windshield, for convenient to operate 6. Phone clamp suitable for 4.5 - 7.2 inch phones 7. Full length: 270mm, suction cup diameter: 70mm

Read more less

1. Made of high quality material, durable. 2. This item is used with the camera or phone mount, like as helmet straps. 3. Made of high quality ABS material. 4. A good choice for your helmet. 5. Safely secure your camera or phone on a vertical wall surface like a car bumper, wall, back of helmet, or similar. 6. Perfect for skiing, snowboarding, surfing, any action sport.

Read more less

1. It is made of environmentally-friendly high-strength silicone material, which is sturdy and durable. 2. It helps to keep dust, smudges and scratches from your device. 3. The hole position is accurate, ensure good appearance and protection function, and will not affect the use. 4. The surface is sprayed processing, beautiful elegant, comfortable to touch, and easy to clean 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. It is made of environmentally-friendly high-strength silicone material, which is sturdy and durable. 2. It helps to keep dust, smudges and scratches from your device. 3. The hole position is accurate, ensure good appearance and protection function, and will not affect the use. 4. The surface is sprayed processing, beautiful elegant, comfortable to touch, and easy to clean 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less