Electronics Module Manual

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 130 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 130 pcs = 67210 pcs 40HQ: 1201 cartons * 130 pcs = 156130 pcs

Read more less

1. Processor: RV1106G22. NPU: 0.5TOPS3. Memory: 128MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirementsSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G22. NPU: 0.5TOPS3. Memory: 128MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirementsSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G22. NPU: 0.5TOPS3. Memory: 128MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements12. Reserve PoE module interface, making the power supply method of the development board more flexible13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and poweredSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G32. NPU: 1TOPS3. Memory: 256MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements12. Reserve PoE module interface, making the power supply method of the development board more flexible13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and poweredSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 130 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 130 pcs = 67210 pcs 40HQ: 1201 cartons * 130 pcs = 156130 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G32. NPU: 1TOPS3. Memory: 256MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements12. Reserve PoE module interface, making the power supply method of the development board more flexible13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and poweredSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G32. NPU: 1TOPS3. Memory: 256MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirementsSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Microcontroller: ESP32-S3 (default is ESP32-S3R8 chip)2. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)3. USB interface:- Interface type: Type-C- Power supply voltage: 5V- Functions: power supply for the device, USB communication, firmware download, etc.4. Isolated RS485 communication interface:- Interface type: terminal block- Direction control: automatically controlled by the main control hardware flow setting- Interface protection: provides TVS diode protection, surge and static protection- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap5. Isolated CAN communication interface:- Interface type: terminal block- Direction control: hardware automatically determines and controls the data transmission direction- Interface protection: provides TVS diode protection, surge and static protection- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap6. Indicator lights:- PWR: power indicator light, connected to USB, turns red when voltage is detected- RS485: RS485 indicator light: Green when data is sent from the RS485 interface, blue when data is sent back from the RS485 interface- CAN: CAN indicator light, flashes when data communication exists at the CAN interface7. Terminal power supply range: 7V - 36V8. Shell: rail-mounted protective shell9. Size: about 9.16 x 2.33 x 5.87cm Feature:1. Based on the ESP32-S3 single-chip microcontroller, it is equipped with an Xtensa 32-bit LX7 dual-core processor with a maximum clock frequency of 240MHz2. It integrates 2.4GHz Wi-Fi and low-power Bluetooth 5 (LE) dual-mode wireless communication, featuring excellent radio performance3. It has an isolated RS485 interface, facilitating the external expansion of various RS485 Modbus industrial expansion modules or sensors4. It has an isolated CAN interface, facilitating the external expansion of various CAN devices5. It has an edge connector interface, allowing for the connection of other devices6. It has a USB Type-C interface, which can be used for power supply and download debugging, facilitating development use7. It has an isolated wiring terminal power supply interface, supporting a wide voltage range of 7V - 36V, facilitating the use of industrial power supply ports8. It has an RTC clock chip, supporting timing tasks9. It has digital isolation to avoid external signal interference to the control chip10. It has an integrated power isolation unit, which can provide stable isolated voltage, and the isolated end does not require additional power supply11. It has RS485 receiver and transmitter indicator lights and CAN operation indicator lights, facilitating the perception of the devices operating statusSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 39cm * 35cm / 19.69inch * 15.35inch * 13.78inch Loading Container 20GP: 390 cartons * 100 pcs = 39000 pcs 40HQ: 907 cartons * 100 pcs = 90700 pcs

Read more less

1. Microcontroller: ESP32-S3 (default is ESP32-S3R8 chip)2. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)3. USB interface:- Interface type: Type-C- Supply voltage: 5V- Functions: power supply for the device, USB communication, firmware download, etc.4. Isolated RS485:- Interface type: terminal block- Direction control: automatically controlled through the main control hardware flow- Interface protection: provides TVS diode protection, surge and static protection- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap5. Relay:- Allowed load connection: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC- Relay channels: 1 channel- Contact type: normally open- Isolation type: optocoupler isolation6. Indicator lights:- PWR: power indicator light, turns on red when USB is connected and voltage is detected- RS485: green light is on when data is sent from the RS485 interface, blue light is on when data is sent back from the RS485 interface- Relay: relay indicator light, turns on when the normally closed contact is closed7. Terminal power supply range: 5V8. Shell: rail-mounted protective shell9. Size: about 9.16 x 2.33 x 5.87 cm Feature:1. Based on the ESP32-S3 single-chip microcontroller, it is equipped with an Xtensa 32-bit LX7 dual-core processor with a maximum frequency of 240MHz2. It integrates 2.4GHz Wi-Fi and low-power Bluetooth 5 (LE) dual-mode wireless communication, featuring excellent radio performance3. It uses high-quality relays, allowing for the connection of loads: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC4. It has an onboard isolated RS485 interface, facilitating the external expansion of various RS485 Modbus industrial expansion modules or sensors5. It has an onboard RTC clock chip, supporting timing tasks6. It has an onboard USB Type-C interface, which can be used for power supply and download debugging, facilitating development7. It has an onboard wiring terminal power supply interface, only supporting 5V power supply8. It has an onboard optocoupler isolation to prevent the external high-voltage circuit from interfering with the control chip9. It has an onboard digital isolation to avoid external signals interfering with the control chip10. It has an onboard integrated power isolation system that can provide stable isolated voltage, and the isolated terminals do not require additional power supply11. It has an onboard RS485 receiver-transmitter indicator light to facilitate the perception of the devices operating status12. It has a rail-mounted protective housing, facilitating installation and use, and the housing makes it saferSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 39cm * 35cm / 19.69inch * 15.35inch * 13.78inch Loading Container 20GP: 390 cartons * 100 pcs = 39000 pcs 40HQ: 907 cartons * 100 pcs = 90700 pcs

Read more less

1. Widely used in the rapid development of intelligent products such as AI speakers, voice interaction, HMI with screen applications and camera applications2. High-performance main control: equipped with ESP32-S3R8, Xtensa 32-bit LX7 dual-core processor, main frequency up to 240MHz 3. Wireless connectivity: support for 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), on-board antenna 4. Storage resources: built-in 512KB SRAM, 384KB ROM, stacked 8MB PSRAM, external 16MB Flash5. Voice interaction: dual digital microphone arrays, support noise reduction and echo cancellation, suitable for accurate voice recognition and near-field/far-field wake up6. Clock management: integrated PCF85063 RTC chip, support RTC power-down hold time, can be used for alarms, timed tasks or wake-up and so on7. Colorful light effects: onboard 7 ring RGB color lights, programmable to achieve a variety of dynamic light effects8. Human-computer interaction: reserve multiple keys and battery switch, convenient for customized function development9. Extended interface: - SPI LCD screen interface (FPC / Pin)- DVP Camera Interface (24PIN) - USB, I2C and some IO pins (compatible with screen interface pins) 10. Multimedia functions: onboard audio decoder chip, MIC and speaker interface11. Storage expansion: support for Micro SD card slot, you can store audio files, etc. 12. Power management: built-in battery charge management module, support for a variety of power modes and low-power applications13. Size: about 5.8 x 4.6 x 4.37cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 140 Carton Weight 5.20kgs / 11.46lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 140 pcs = 57680 pcs 40HQ: 958 cartons * 140 pcs = 134120 pcs

Read more less

1. Interface standard: RS485 compliant 2. Physical interface: RS485 terminal block 3. Communication rate: 300bps - 460800bps baud rate (adaptive) 4. Support points: each RS485 interface support up to 32 nodes5. Communication distance: 1200m (9600bps), the higher the communication rate, the shorter the distance6. Working mode: RS485 two-wire (A, B), half-duplex transparent transmission7. Supply voltage: DC 5V - 36V 8. Operating temperature: -45 to 85 degrees Celsius9. Ambient humidity: less than 95%RH 10. Transmission medium: ordinary parallel/twisted pair cable11. Size: about 8.19 x 5.4 x 3.2cmFeatures:1. 2 RS485 slave ports can be extended through 1 RS485 master port, which can realize RS485 network relay, expansion and isolation functions2. Adopt terminal type power supply access3. Rail-type housing design, easy to install4. Suitable for data acquisition, IoT gateway, security IoT and smart meter monitoring and other fields5. Support multiple RS485 devices cascade, to solve the problem of multi-node network connection in large systems to ensure stable and reliable signal amplification6. Built-in optoelectronic isolation protection circuit, RS485 master-slave device isolation, RS485 master-slave device can effectively protect the device from the ground potential difference between the equipment, static electricity, lightning and surge damage, can be applied to the reliability and safety requirements of the higher industrial environmentSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 7cm * 4cm / 4.72inch * 2.76inch * 1.57inch Qty per Carton 160 Carton Weight 20.20kgs / 44.53lb Carton Size 51cm * 38cm * 34cm / 20.08inch * 14.96inch * 13.39inch Loading Container 20GP: 404 cartons * 160 pcs = 64640 pcs 40HQ: 939 cartons * 160 pcs = 150240 pcs

Read more less

1. Using for Raspberry Pi designed RP2350A microcontroller chip 2. Unique dual-core, dual architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, the clock running frequency are up to 150MHz, to support the user in the two architectures to switch between the flexible 3. Built-in 520KB SRAM and 16MB on-chip Flash. 4. Adopting Type-C interface, no need to worry about forward and reverse plugging. 5. Built-in QM18658 6-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope)6. 8 x 8 RGB LED matrix on board, can display cool lighting effects 7. Dout pin, can be connected to expand the RGB matrix 8. USB1.1 host and slave support 9. Supports low power sleep and hibernation modes. 10. Drag-and-drop program download via USB recognized as mass memory 11. 25 multi-function GPIO pins referenced 12. 1 HSTX, 2 SPI, 2 12C, 2 UART, 4 12-bit ADC and 16 controllable PWM channels 13. Precision on-chip clocks and timers14. Temperature sensors 15. On-chip accelerated floating point library 16. 12 programmable 1/O (PIO) state machines for custom peripheral support17. Size: about 2.5 x 2.5cmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.40kgs / 33.95lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 720 pcs = 315360 pcs 40HQ: 1018 cartons * 720 pcs = 732960 pcs

Read more less

1. Photochip: ISG1321 2. CMOS size: 1/4 inch 3. Camera type: black and white 4. Pixel: 1.38 million (1280 x 1080)5. Shutter mode: global shutter 6. Output frame rate: up to 120 FPS 7. Interface: MIPI-CSI (2-lane) 8. Aperture: F2.4 9. Aberration: less than 1% 10. Field of view: 95.5 degrees11. Focal length: 2.88mm 12. Focus mode: manual focus 13. Application scenarios: machine vision, logistics reading and industrial inspection14. Size: about 2.5 x 2.4 x 1.66cmFeatures. 1:1. Equipped with 95.5 degree wide-angle lens, presenting a wider range of images, no longer limited to a narrow viewing angle2. Global shutter, all pixels are exposed at the same time, the captured image is not easy to produce distortion.3. Support up to 1280 x 1080 120fps, accurately capture fast-moving objectsSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 3cm / 2.36inch * 2.36inch * 1.18inch Qty per Carton 520 Carton Weight 16.60kgs / 36.60lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 520 pcs = 208520 pcs 40HQ: 930 cartons * 520 pcs = 483600 pcs

Read more less

1. Widely used in the rapid development of intelligent products such as AI speakers, voice interaction, HMI with screen applications and camera applications2. High-performance main control: equipped with ESP32-S3R8, Xtensa 32-bit LX7 dual-core processor, main frequency up to 240MHz 3. Wireless connectivity: support for 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), on-board antenna 4. Storage resources: built-in 512KB SRAM, 384KB ROM, stacked 8MB PSRAM, external 16MB Flash5. Voice interaction: dual digital microphone arrays, support noise reduction and echo cancellation, suitable for accurate voice recognition and near-field/far-field wake up6. Clock management: integrated PCF85063 RTC chip, support RTC power-down hold time, can be used for alarms, timed tasks or wake-up and so on7. Colorful light effects: onboard 7 ring RGB color lights, programmable to achieve a variety of dynamic light effects8. Human-computer interaction: reserve multiple keys and battery switch, convenient for customized function development9. Extended interface: - SPI LCD screen interface (FPC / Pin)- DVP Camera Interface (24PIN) - USB, I2C and some IO pins (compatible with screen interface pins) 10. Multimedia functions: onboard audio decoder chip, MIC and speaker interface11. Storage expansion: support for Micro SD card slot, you can store audio files, etc. 12. Power management: built-in battery charge management module, support for a variety of power modes and low-power applications13. Size: about 5.8 x 4.6 x 4.37cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 140 Carton Weight 6.60kgs / 14.55lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 140 pcs = 57680 pcs 40HQ: 958 cartons * 140 pcs = 134120 pcs

Read more less

1. Adopts ESP32-H2FH4S chip with RISC-V 32-bit single-core processor, up to 96MHz, and built-in 4MB Flash memory2. Integrated Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with superior RF performance3. Adopts Type-C interface, no need to worry about forward and reverse plugging4. Rich peripheral interfaces, high compatibility and expandability5. Stamp hole design, can be directly soldered and integrated into self-designed baseboards6. Compact and powerful, with rich peripheral interfaces, can be used in smart home, industrial automation, healthcare and consumer electronics, etc.7. Support ESP-IDF, Arduino and other platforms, easy to get started, can be quickly embedded in the application8. Size: about 2.35 x 1.8cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 380 Carton Weight 12.40kgs / 27.34lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 380 pcs = 156560 pcs 40HQ: 958 cartons * 380 pcs = 364040 pcs

Read more less

1. Adopts ESP32-H2FH4S chip with RISC-V 32-bit single-core processor, up to 96MHz, and built-in 4MB Flash memory2. Integrated Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with superior RF performance3. Adopts Type-C interface, no need to worry about forward and reverse plugging4. Rich peripheral interfaces, high compatibility and expandability5. Stamp hole design, can be directly soldered and integrated into self-designed baseboards6. Compact and powerful, with rich peripheral interfaces, can be used in smart home, industrial automation, healthcare and consumer electronics, etc.7. Support ESP-IDF, Arduino and other platforms, easy to get started, can be quickly embedded in the application8. Size: about 2.35 x 1.8cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 380 Carton Weight 12.40kgs / 27.34lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 380 pcs = 156560 pcs 40HQ: 958 cartons * 380 pcs = 364040 pcs

Read more less

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz2. 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) support with on-board antenna 3. 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash onboard4. Two onboard 1.28-inch LCD panels, 240 x 240 resolution, 65K color, optional touch version 5. ES8311 audio codec and ES7210 audio ADC chip on board, equipped with standard microphone and speaker interface, support AI voice interaction 6. Micro SD card slot on board, convenient to expand the local storage space, support for storing and reading data, pictures and audio files, etc. 7. Onboard lithium battery charge management module, reserved 3.7V lithium battery power supply interface 8. Onboard SH1.0 14 Pin interface, lead to UART, I2C and some IO interfaces, convenient for DIY customized functions9. Size: about 9.35 x 3.65cmPacking list:- Development board x 1 - SH1.0 14 Pin cable 100mm x 1 - FFC cable 18 Pin 200mm (same direction) x 1 - 8 Ohm 2W MX1.25 2 Pin speaker (forward) 80mm x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 140 Carton Weight 29.00kgs / 63.93lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 140 pcs = 57680 pcs 40HQ: 958 cartons * 140 pcs = 134120 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. 10 128 x 128 resolution 0.85-inch mechanical display buttons with 1 240 x 296 resolution 2.01-inch secondary screen for high freedom of configuration2. Support 10-screen splicing display, background support pictures/video, and can be multi-layer overlay3. Linux + QMK dual system architecture:- Main control: T113-S3 (A7 dual-core 1.2GHz) running Linux, processing complex logic- Co-controller: GD32 MCU running QMK to realize real mechanical input experience with 0 latency- Support functions: single-key/key combination/macro mouse control and multi-command cascade, QMK natively realized, no need to rely on computer software 4. Built-in theme editor: drag-and-drop editing, no need to write code5. Import/export function to share your configuration and themes6. With 40 degrees removable stand, triangular support design, long time press does not get tired, can be 5.5 degrees desktop flat, two ways of placing, choose at will7. Provide online platform to download themes and plug-ins, continuously updated8. Support real-time call LibreHardwareMonitor and Openweather data:- LibreHardwareMonitor: real-time display of CPU temperature, fan speed and other hardware information- Openweather: Integrate weather information as a dynamic background display9. Supports voice recognition and AI voice interaction.10. Support wireless control of smart home11. Aluminum alloy upper shell: rugged and durable, craft-class texture 12. 2.5D high-transparency acrylic lens: hardened, scratch-resistant (more than 3H hardness)13. Size: about 17.1 x 7.6 x 2.1cmPacking list:- Control panel x 1- Bracket x 1- Type-C cable x 1- Wi-Fi receiver x 1Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs 40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. 10 128 x 128 resolution 0.85-inch mechanical display buttons with 1 240 x 296 resolution 2.01-inch secondary screen for high freedom of configuration2. Support 10-screen splicing display, background support pictures/video, and can be multi-layer overlay3. Linux + QMK dual system architecture:- Main control: T113-S3 (A7 dual-core 1.2GHz) running Linux, processing complex logic- Co-controller: GD32 MCU running QMK to realize real mechanical input experience with 0 latency- Support functions: single-key/key combination/macro mouse control and multi-command cascade, QMK natively realized, no need to rely on computer software 4. Built-in theme editor: drag-and-drop editing, no need to write code5. Import/export function to share your configuration and themes6. With 40 degrees removable stand, triangular support design, long time press does not get tired, can be 5.5 degrees desktop flat, two ways of placing, choose at will7. Provide online platform to download themes and plug-ins, continuously updated8. Support real-time call LibreHardwareMonitor and Openweather data:- LibreHardwareMonitor: real-time display of CPU temperature, fan speed and other hardware information- Openweather: Integrate weather information as a dynamic background display9. Supports voice recognition and AI voice interaction.10. Support wireless control of smart home11. Aluminum alloy upper shell: rugged and durable, craft-class texture 12. 2.5D high-transparency acrylic lens: hardened, scratch-resistant (more than 3H hardness)13. Size: about 17.1 x 7.6 x 2.1cmPacking list:- Control panel x 1- Bracket x 1- Type-C cable x 1- Wi-Fi receiver x 1Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs 40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. Multi-band 5G NR / LTE-FDD / LTE-TDD module, supporting 5G standalone (SA) mode and up to 220Mbps download rate2. Strong expansion capability, rich interfaces, including USB 2.0 and GPIO, etc., and support for a variety of network protocols3. Adopting M.2 form factor, its AT commands are compatible with SIM7600/SIM8200/SIM8260 series modules4. Designed for efficient and reliable data communication under various radio propagation environments, and can be widely adapted to various application scenarios5. Standard M.2B KEY interface6. 5G RedCap module with low power consumption and light weight7. 5G standard: 3GPP R1678. Chip solution: Qualcomm Snapdragon X359. Communication protocol: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 10. Dial-up Internet: RNDIS, ECM, PPP 11. Short message (SMS): support MT, MO, CB, Text, PDU 12. Firmware upgrade: support firmware upgrade via USB interface 13. SIM card: 1.8V/2.95V 14. Antenna Interface: 3 x IPEX-4 interface 15. Supply Voltage: 3.4V - 4.4V 16. Operating temperature: -30 to 70 degrees Celsius17. Size: about 4.2 x 3.14 x 0.34cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 1cm / 3.15inch * 2.36inch * 0.39inch Qty per Carton 1000 Carton Weight 31.00kgs / 68.34lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 1000 pcs = 461000 pcs 40HQ: 1071 cartons * 1000 pcs = 1071000 pcs

Read more less

1. Protection circuits: short-circuit/over-voltage/over-current protection, etc. 2. Input parameters: AC 100V - 240V 50Hz / 60Hz 1.5A Max, no-load low standby power consumption3. Output parameters: DC 19V 3.5A, ripple 190mVpp4. 5.5mm outer diameter, 2.5mm inner diameter, DC jack5. Cable length: about 1.5m6. Size: about 10 x 4.68 x 3.25cmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 80 pcs = 36000 pcs 40HQ: 1045 cartons * 80 pcs = 83600 pcs

Read more less

1. Multi-band 5G NR / LTE-FDD / LTE-TDD / HSPA+ module, supports R16 5G NSA / SA, up to 3.47Gbps download rate2. Strong scalability and rich interfaces, including PCle, USB3.1 and GPIO, provide flexibility and integration capabilities for applications3. M.2 package, AT commands are compatible with SIM8200 series modules4. Designed for applications requiring high throughput data communication under various radio propagation conditions, suitable for a variety of application scenarios5. Standard M.2 B KEY interface6. 5G standard: 3GPP R16 7. Chip program: Qualcomm Snapdragon X628. Communication protocols: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 9. Dial-up internet: RNDIS, NDIS, PPP,MBIM 10. Short message service (SMS): support MT, MO, CB, Text, PDU11. Firmware upgrade: support firmware upgrade via USB interface12. SIM card: 1.8V/2.95V 13. Antenna interface: 4 x IPEX-4 interface 14. Supply voltage: 3.135V - 4.4V 15. Operating temperature: -30 to 70 degrees Celsius16. Size: about 5.2 x 3 x 0.23cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 8cm * 6cm * 1cm / 3.15inch * 2.36inch * 0.39inch Qty per Carton 1000 Carton Weight 41.00kgs / 90.39lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 1000 pcs = 461000 pcs 40HQ: 1071 cartons * 1000 pcs = 1071000 pcs

Read more less

1. Protection circuits: short-circuit/over-voltage/over-current protection, etc. 2. Input parameters: AC 100V - 240V 50Hz / 60Hz 1.5A Max, no-load low standby power consumption3. Output parameters: DC 19V 3.5A, ripple 190mVpp4. 5.5mm outer diameter, 2.5mm inner diameter, DC jack5. Cable length: about 1.5m6. Size: about 10 x 4.68 x 3.25cmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 80 pcs = 36000 pcs 40HQ: 1045 cartons * 80 pcs = 83600 pcs

Read more less

1. Usability: available as a module, it can be directly used in your electronic projects2. Compact design: compact and lightweight, ideal for projects with limited space3. High-performance processor: utilizing the ESP32-C3 chip, it enables efficient WiFi and Bluetooth connections4. Wide operating temperature range: capable of reliable operation, suitable for various environmentsESP32-C3 parameters1. CPU: RISC-V 32-bit single-core processor2. Clock frequency: 160 MHz3. SRAM: 400 KB4. ROM: 384 KB5. On-chip Flash: none / 4 MB in different specifications6. External Flash: maximum support 16 MB7. External PSRAM support: N/A8. WiFi: 802.11 b/g/n, 2.4 GHz9. Bluetooth: Bluetooth 5.010. ADC: 2 x 12-bit SAR ADC, 6 channelsSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 34cm * 34cm / 18.5inch * 13.39inch * 13.39inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1139 cartons * 288 pcs = 328032 pcs

Read more less

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz2. 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) support with on-board antenna 3. 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash onboard4. Two onboard 1.28-inch LCD panels, 240 x 240 resolution, 65K color, optional touch version 5. ES8311 audio codec and ES7210 audio ADC chip on board, equipped with standard microphone and speaker interface, support AI voice interaction 6. Micro SD card slot on board, convenient to expand the local storage space, support for storing and reading data, pictures and audio files, etc. 7. Onboard lithium battery charge management module, reserved 3.7V lithium battery power supply interface 8. Onboard SH1.0 14 Pin interface, lead to UART, I2C and some IO interfaces, convenient for DIY customized functions9. Size: about 9.35 x 3.65cmPacking list:- Development board x 1 - SH1.0 14 Pin cable 100mm x 1 - FFC cable 18 Pin 200mm (same direction) x 1 - 8 Ohm 2W MX1.25 2 Pin speaker (forward) 80mm x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 140 Carton Weight 29.00kgs / 63.93lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 140 pcs = 57680 pcs 40HQ: 958 cartons * 140 pcs = 134120 pcs

Read more less

1. Display panel: 1.54-inch e-ink screen 2. Display resolution: 200 x 2003. Communication interface: SPI4. Display color: black, white 5. Viewing angle: more than 170 degrees6. Gray level: 2 7. Global refresh: 2s 8. Local refresh: 0.3s 9. Display mode: reflective10. Size: about 5.3 x 3.98 x 1.69cmFeatures:1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor up to 240MHz2. 2.4GHz Wi-Fi and Bluetooth 5 (LE) support, on-board internal antenna3. Built-in 512KB SRAM and 384KB ROM, integrated Flash and PSRAM in stacked package4. 1.54-inch e-ink screen with 200 x 200 resolution, high contrast ratio and wide viewing angle5. Onboard audio codec chip, support voice capture and playback, easy to realize AI voice interaction applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature and humidity sensor, can realize accurate RTC time management and temperature and humidity monitoring7. Micro SD card slot on board, can be connected to external Micro SD card to store pictures or files8. Onboard PWR, BOOT two customizable function side buttons, convenient to use the buttons for custom function development 9. Reserve 2 x 6 2.54mm spacing female connector, convenient for external expansion useSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs 40HQ: 1018 cartons * 160 pcs = 162880 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. Display panel: 1.54-inch e-ink screen 2. Display resolution: 200 x 2003. Communication interface: SPI4. Display color: black, white 5. Viewing angle: more than 170 degrees6. Gray level: 2 7. Global refresh: 2s 8. Local refresh: 0.3s 9. Display mode: reflective10. Size: about 5.3 x 3.98 x 1.69cmFeatures:1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor up to 240MHz2. 2.4GHz Wi-Fi and Bluetooth 5 (LE) support, on-board internal antenna3. Built-in 512KB SRAM and 384KB ROM, integrated Flash and PSRAM in stacked package4. 1.54-inch e-ink screen with 200 x 200 resolution, high contrast ratio and wide viewing angle5. Onboard audio codec chip, support voice capture and playback, easy to realize AI voice interaction applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature and humidity sensor, can realize accurate RTC time management and temperature and humidity monitoring7. Micro SD card slot on board, can be connected to external Micro SD card to store pictures or files8. Onboard PWR, BOOT two customizable function side buttons, convenient to use the buttons for custom function development 9. Reserve 2 x 6 2.54mm spacing female connector, convenient for external expansion useSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 15.40kgs / 33.95lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs 40HQ: 1018 cartons * 160 pcs = 162880 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. SIM8260G-M2 version is applicable to countries and regions covering 5G Sub-6G bands in the world2. SIM8262E-M2 version is applicable to countries and regions covering 5G Sub-6G band except Americas3. 5G standard: 3GPP R16 4. Chip solution: Qualcomm Snapdragon X625. LTE: 1.6Gbps (DL) / 200Mbps (UL) 6. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)7. Size: about 10 x 7.9cmFeatures:1. Based on Qualcomm platform, supports 5G NSA and SA networking, multi-mode and multi-frequency bands2. Integrates dual-frequency positioning with multiple constellation systems: GPS, GLONASS, BeiDou, Galileo and QZSS3. Onboard USB 3.1 interface, backward compatible with USB 2.0, can be used to access the Jetson Orin motherboard, computer or Raspberry Pi for high-speed 5G Internet access 4. On-board M.2B KEY standard interface and pin setting switch5. 4 SMA to IPEX antenna conversion interfaces on board, more convenient for antenna installation6. Reserved UART pad interface, convenient to realize data transmission with some modules through this interface7. 1 Nano SIM card slot and 1 QFN-8 (5×6) eSIM card slot on board, dual card single standby, can be switched to enable by AT command8. Onboard audio interface and audio decoder chip, can be used for SIMXXX series modules to make phone calls and other voice operations9. On-board power switch, reset button and LED indicator, convenient to control the module switch and check the operation status10. On-board high-efficiency power supply circuit, can output up to 3A currentPacking list:- Expansion board x 1 - Module x 1 - 5G antenna x 4 - SMA dust protection cap x 5- 13cm IPEX1 to IPEX4 cable x 2 - 5cm IPEX1 to IPEX4 cable x 2- Screw kit x 1 - GPS antenna x 1 - Dual USB cable x 1 - Cooler x 1 - USB converter x 1 - Screwdriver x 1Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs 40HQ: 958 cartons * 60 pcs = 57480 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs 40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. SIM8260G-M2 version is applicable to countries and regions covering 5G Sub-6G bands in the world2. SIM8262E-M2 version is applicable to countries and regions covering 5G Sub-6G band except Americas3. 5G standard: 3GPP R16 4. Chip solution: Qualcomm Snapdragon X625. LTE: 1.6Gbps (DL) / 200Mbps (UL) 6. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)7. Size: about 10 x 7.9cmFeatures:1. Based on Qualcomm platform, supports 5G NSA and SA networking, multi-mode and multi-frequency bands2. Integrates dual-frequency positioning with multiple constellation systems: GPS, GLONASS, BeiDou, Galileo and QZSS3. Onboard USB 3.1 interface, backward compatible with USB 2.0, can be used to access the Jetson Orin motherboard, computer or Raspberry Pi for high-speed 5G Internet access 4. On-board M.2B KEY standard interface and pin setting switch5. 4 SMA to IPEX antenna conversion interfaces on board, more convenient for antenna installation6. Reserved UART pad interface, convenient to realize data transmission with some modules through this interface7. 1 Nano SIM card slot and 1 QFN-8 (5×6) eSIM card slot on board, dual card single standby, can be switched to enable by AT command8. Onboard audio interface and audio decoder chip, can be used for SIMXXX series modules to make phone calls and other voice operations9. On-board power switch, reset button and LED indicator, convenient to control the module switch and check the operation status10. On-board high-efficiency power supply circuit, can output up to 3A currentPacking list:- Expansion board x 1 - Module x 1 - 5G antenna x 4 - SMA dust protection cap x 5- 13cm IPEX1 to IPEX4 cable x 2 - 5cm IPEX1 to IPEX4 cable x 2- Screw kit x 1 - GPS antenna x 1 - Dual USB cable x 1 - Cooler x 1 - USB converter x 1 - Screwdriver x 1Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs 40HQ: 958 cartons * 60 pcs = 57480 pcs

Read more less

1. Usability: available as a module, it can be directly used in your electronic projects2. Compact design: compact and lightweight, ideal for projects with limited space3. High-performance processor: utilizing the ESP32-C3 chip, it enables efficient WiFi and Bluetooth connections4. Wide operating temperature range: capable of reliable operation, suitable for various environmentsESP32-C3 parameters1. CPU: RISC-V 32-bit single-core processor2. Clock frequency: 160 MHz3. SRAM: 400 KB4. ROM: 384 KB5. On-chip Flash: none / 4 MB in different specifications6. External Flash: maximum support 16 MB7. External PSRAM support: N/A8. WiFi: 802.11 b/g/n, 2.4 GHz9. Bluetooth: Bluetooth 5.010. ADC: 2 x 12-bit SAR ADC, 6 channelsSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 34cm * 34cm / 18.5inch * 13.39inch * 13.39inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1139 cartons * 288 pcs = 328032 pcs

Read more less

1. Includes USB serial port, plug-and-play2. 36 GPIOs, each can be configured as PWM, 12C3. FCC CE certified WiFi module with built-in antenna4. Operation is simpler and more convenient5. Communication interface: SPISpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 34cm * 34cm / 18.5inch * 13.39inch * 13.39inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1139 cartons * 288 pcs = 328032 pcs

Read more less

1. Includes USB serial port, plug-and-play2. 36 GPIOs, each can be configured as PWM, 12C3. FCC CE certified WiFi module with built-in antenna4. Operation is simpler and more convenient5. Communication interface: SPISpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 34cm * 34cm / 18.5inch * 13.39inch * 13.39inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1139 cartons * 288 pcs = 328032 pcs

Read more less

1. Includes USB serial port, plug-and-play2. 36 GPIOs, each can be configured as PWM, 12C3. FCC CE certified WiFi module with built-in antenna4. Operation is simpler and more convenient5. Communication interface: SPISpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 34cm * 34cm / 18.5inch * 13.39inch * 13.39inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1139 cartons * 288 pcs = 328032 pcs

Read more less