Optical Series

1. Convert DTS / AC3 source digital audio to analog 5.1 audio or stereo audio output. 2. The analog stereo(L / R) signals after digital processing chip handle convert it to analog 5.1 channel output. 3. Multi-channel audio input(SPDIF, Coaxial, Stereo), 2 x SPDIF input, 1 x Coaxial input, 1 x Stereo, 1 x USB. 4. Analog 5.1-channel or stereo output. 5. Plug and play, easy to use.

Read more less

1. Signal to noise: 120dB2. Degree of separation: 85dB3. Frequency response: 20Hz-20KHz + - 0.5db4. Output voltage: 2.2V5. DC 5V 1A power supply output 110v-240v broadband convert DC5V power6. Converts DTS or AC3 digital audio source to 5.1 analog audio or stereo audio output.7. The L or R stereo analog signals after the digital processing chip converts it to 5.1 channel analog output8. Multi-channel audio input SPDIF, Coaxial, stereo 2 x SPDIF input, 1 x Coaxial input, 1 x STEREO9. 5.1 channel analog or stereo output

Read more less

Features:1. With 3.5mm and 2 RCA 2 connection options, you can play music on 2 speakers at the same time2. Suitable for most speakers3. The effective connection distance is up to 10m, and the music playback can be controlled remotely4. Use the charging cable to connect to your car or other power source. When the car starts or has electricity, it will automatically turn on and automatically connect to the device you connected last time; when the car is turned off, it will automatically turn off5. Multi-point Bluetooth connection6. Easy to set upProduct specifications:1. USB cable length: 75cm2. Host weight: 34g3. USB cable weight: 18g4. Body size: 5.5x5.5x2.2cmPacking list:Host x 1USB cable x 1

Read more less

1. Optical to coaxial Bi-directional audio converter: switch to select either OPTICAL TOSLINK or COAX input and convert the signal (as is) to both its COAXIAL and OPTICAL TOSLINK output ports 2. Audio format, audio input & output support audio format: LPCM2.0/ DTS/ DOLBY-AC3. And the highest support 192KHz sampling rate. Noise-free transmission, high definition audio output for your amplifier and speaker 3. Easy to setup, plug and play, no need any software and drive. It is able to power this optical to Coax converter from phone adapter and a USB jack on the TV or nearby USB port device 4. Long distance, use optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters(98 Feet), use the standard coaxial cable output can be up to 10 meters (32 Feet) 5. Wide applicability, compatible with Blu-ray player, satellite receiver, BR player, Xbox 360, HDTV, DVD, amplifier, sound bar, speaker and all device with digital audio out port

Read more less

1. The item is a toslink 3 to 1 optical audio switcher. 2. 3 input 1 output, allowing 3 devices to switch. It supports digital audio devices that have regular toslink connectors and provides bidirectional transmission between 1 signal and 1 audio player. 3. Rotatable switch allows user to switch transmission among 3 devices, easy operation. 4. Suitable for connecting MD DVD VCR CD Player, XBOX360, PS3 video game consoles, etc. 5. Simple installation, plug and play, easy to use.

Read more less

1.Build-in high performance RTOS operating system and audio decoder chip, support DTS/AC-3 2.Super fast start time about 3 seconds 3.Input: SPDIF Optical, Coaxial 4.Output: L-OUT-R, 3.5mm headphone port 5.Auto switch between optical and coaxial channel input 6.Auto decode AC-3/DTS(LPCM/PCM/RAW) input signal without any action 7.High compatibility: support network player, HDTV, Blu-ray DVD, DVD, PS3, XBOX 360, DM500S, DM800HD, etc. 8.Small size and metal case, anti-interference 9.Adopt RCA/3.5mm headphone port output, convenient and efficient in use 10.Supports volume adjustment

Read more less

1. Three ways of optical fiber signals switch to one sets of SPDIF / Toslink signal receiving device. 2. Audio format support: LPCM2.0 / DTS / Dolby-AC3. 3. Support signal retiming. 4. Used optical fiber cable loss less the 0.2Db/m, output distance is up to 40m. 5. The input conrol can through R/M and also can directly press the button. 6. Support last time working state memory when power off. 7. Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine. 8. LED status indication. 9. No loss of quality. 10. Installs in minutes. 11. Need DC 5V / 500mA power supply. 12. The remote control is powered by CR2025 battery.

Read more less

1. Supported audio format: LPCM2.0/DTS/DOLBY-AC3 2. Three SPDIF/TosLink input interfaces, one SPDIF/TosLink output interface 3. Manual remote control button 4. Infrared interface 5. Applicable equipment: TV, audio, power amplifier, PS3, PS4, etc. 6. Product size: 6.1x6.1x6.1cm

Read more less

1. This digital-to-analog audio converter can be used for home or professional audio switching. It can convert coaxial cable or Toslink digital audio signals into analog audio. At the same time, it can be connected to peripherals like amplifiers through standard RCA-style jacks2. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio3. Support sampling rate 44.1 32., 48-96KHz playback4. The input code stream is 24bit S/PDIF left and right channels, providing electronic noise reduction transmission5. Easy to install and simple to operate6. Input: coaxial or optical digital audio7. Output: R/L (audio output connector)8. Audio input connection: Toslink, 1xRCA (coaxial)9. Audio output connection: 2xRCA (right/left), 3.5 stereo10. Power input: AC 100-240V 50/60Hz

Read more less

1. The digital to analog audio converter is designed for home or professional audio switching 2. Convert the coaxial or Toslink digital audio signal to analog L/R audio, and can connect to external equipment, such as an amplifier, through a standard RCA type jack, and can also be output from a 3.5mm headphone jack to connect to high-fidelity headphones 3. The converter is small and easy to install 4. Built-in high-fidelity amplifier chip 5. Headphones and RCA output port can easily launch 16-300 ohm high-fidelity headphones 6. The product supports power off and volume adjustment, making it easier to adapt to different sources and different environments 7. The product also supports Toslink input to Toslink, coaxial output, coaxial input to Toslink, coaxial output, which can adapt to more digital audio amplifier interfaces 8. Product size: 8.5 x 7.2 x 2.8cm 9. Product weight: 130g

Read more less

1. The digital to analog audio converter is designed for home or professional audio switching 2. Convert the coaxial or Toslink digital audio signal to analog L/R audio, and can connect to external equipment, such as an amplifier, through a standard RCA type jack, and can also be output from a 3.5mm headphone jack to connect to high-fidelity headphones 3. The converter is small and easy to install 4. Built-in high-fidelity amplifier chip 5. Headphones and RCA output port can easily launch 16-300 ohm high-fidelity headphones 6. The product supports power off and volume adjustment, making it easier to adapt to different sources and different environments 7. The product also supports Toslink input to Toslink, coaxial output, coaxial input to Toslink, coaxial output, which can adapt to more digital audio amplifier interfaces 8. Product size: 8.5 x 7.2 x 2.8cm 9. Product weight: 130g

Read more less

1. The digital to analog audio converter is designed for home or professional audio switching 2. Convert the coaxial or Toslink digital audio signal to analog L/R audio, and can connect to external equipment, such as an amplifier, through a standard RCA type jack, and can also be output from a 3.5mm headphone jack to connect to high-fidelity headphones 3. The converter is small and easy to install 4. Built-in high-fidelity amplifier chip 5. Headphones and RCA output port can easily launch 16-300 ohm high-fidelity headphones 6. The product supports power off and volume adjustment, making it easier to adapt to different sources and different environments 7. The product also supports Toslink input to Toslink, coaxial output, coaxial input to Toslink, coaxial output, which can adapt to more digital audio amplifier interfaces 8. Product size: 8.5 x 7.2 x 2.8cm 9. Product weight: 130g

Read more less

1. The digital to analog audio converter is designed for home or professional audio switching 2. Convert the coaxial or Toslink digital audio signal to analog L/R audio, and can connect to external equipment, such as an amplifier, through a standard RCA type jack, and can also be output from a 3.5mm headphone jack to connect to high-fidelity headphones 3. The converter is small and easy to install 4. Built-in high-fidelity amplifier chip 5. Headphones and RCA output port can easily launch 16-300 ohm high-fidelity headphones 6. The product supports power off and volume adjustment, making it easier to adapt to different sources and different environments 7. The product also supports Toslink input to Toslink, coaxial output, coaxial input to Toslink, coaxial output, which can adapt to more digital audio amplifier interfaces 8. Product size: 8.5 x 7.2 x 2.8cm 9. Product weight: 130g

Read more less

1. Convert coaxial cable or Toslink digital audio signal into analog L/R audio2. Support 32, 44.1, 48 and 192KHz sampling rate3. Support the left and right channel 24-bit S/PDIF incoming bit stream pair4. No electromagnetic noise transmission5. Simple installation and easy to use6. Cable length: 8cm7. Resolution: 192KHZ

Read more less

1. Convert coaxial cable or Toslink digital audio signal into analog L/R audio2. Support 32, 44.1, 48 and 192KHz sampling rate3. Support the left and right channel 24-bit S/PDIF incoming bit stream pair4. No electromagnetic noise transmission5. Simple installation and easy to use6. Cable length: 8cm7. Resolution: 192KHZ

Read more less

1. Convert coaxial cable or Toslink digital audio signal into analog L/R audio2. Support 32, 44.1, 48 and 192KHz sampling rate3. Support the left and right channel 24-bit S/PDIF incoming bit stream pair4. No electromagnetic noise transmission5. Simple installation and easy to use6. Cable length: 8cm7. Resolution: 192KHZ

Read more less

1. Convert coaxial cable or Toslink digital audio signal into analog L/R audio2. Support 32, 44.1, 48 and 192KHz sampling rate3. Support the left and right channel 24-bit S/PDIF incoming bit stream pair4. No electromagnetic noise transmission5. Simple installation and easy to use6. Cable length: 8cm7. Resolution: 192KHZ

Read more less

1. Audio signal input coaxial cable or optical digital audio cable2. Audio signal output L/R audio3. Audio input connector optical cable, 1xRCA (coaxial)4. Audio output interface 2 x RCA (R/L)5. This decoder has many functions and excellent performance6. Convert coaxial cable or Toslink digital audio signal into analog L/R audio7. Support 32, 44.1, 48, 192KHz sampling rate8. Support 24 bit S/PDIF input stream pair for left and right channels9. No electromagnetic noise transmission10. Easy to install and easy to use12. Weight: host: 24g, optical fiber cable: 3g, USB cable: 18g, power supply: 54g

Read more less

1. Audio signal input coaxial cable or optical digital audio cable2. Audio signal output L/R audio3. Audio input connector optical cable, 1xRCA (coaxial)4. Audio output interface 2 x RCA (R/L)5. This decoder has many functions and excellent performance6. Convert coaxial cable or Toslink digital audio signal into analog L/R audio7. Support 32, 44.1, 48, 192KHz sampling rate8. Support 24 bit S/PDIF input stream pair for left and right channels9. No electromagnetic noise transmission10. Easy to install and easy to use12. Weight: host: 24g, optical fiber cable: 3g, USB cable: 18g, power supply: 54g

Read more less

1. Audio signal input coaxial cable or optical digital audio cable2. Audio signal output L/R audio3. Audio input connector optical cable, 1xRCA (coaxial)4. Audio output interface 2 x RCA (R/L)5. This decoder has many functions and excellent performance6. Convert coaxial cable or Toslink digital audio signal into analog L/R audio7. Support 32, 44.1, 48, 192KHz sampling rate8. Support 24 bit S/PDIF input stream pair for left and right channels9. No electromagnetic noise transmission10. Easy to install and easy to use12. Weight: host: 24g, optical fiber cable: 3g, USB cable: 18g, power supply: 54g

Read more less

1. Audio signal input coaxial cable or optical digital audio cable2. Audio signal output L/R audio3. Audio input connector optical cable, 1xRCA (coaxial)4. Audio output interface 2 x RCA (R/L)5. This decoder has many functions and excellent performance6. Convert coaxial cable or Toslink digital audio signal into analog L/R audio7. Support 32, 44.1, 48, 192KHz sampling rate8. Support 24 bit S/PDIF input stream pair for left and right channels9. No electromagnetic noise transmission10. Easy to install and easy to use12. Weight: host: 24g, optical fiber cable: 3g, USB cable: 18g, power supply: 54g

Read more less

1. Audio signal input coaxial cable or optical digital audio cable2. Audio signal output L/R audio3. Audio input connector optical cable, 1xRCA (coaxial)4. Audio output interface 2 x RCA (R/L)5. This decoder has many functions and excellent performance6. Convert coaxial cable or Toslink digital audio signal into analog L/R audio7. Support 32, 44.1, 48, 192KHz sampling rate8. Support 24 bit S/PDIF input stream pair for left and right channels9. No electromagnetic noise transmission10. Easy to install and easy to use12. Weight: host: 24g, optical fiber cable: 3g, USB cable: 18g, power supply: 54g

Read more less

1. Provides electronic noise reduction transmission2. Easy installation and simple operation3. Power input: AC 100-240V 50/60Hz4. The input stream is the left and right channels of 24bit S/PDIF5. Supports playback with a sampling rate of 44.1 32.48—96KHz6. Audio input connection: Toslink, 1xRCA (coaxial)7. Audio output connection: 2xRCA (right/left), 3.5 stereo8. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio9. Can be used for home or professional audio switching, can convert coaxial or Toslink digital audio signals to analog audio, and can connect to peripherals such as power amplifiers through standard RCA style jacks10. Dimensions: 72 x 55 x 20mm11. Unit weight: 0.05kg

Read more less

1. Provides electronic noise reduction transmission2. Easy installation and simple operation3. Power input: AC 100-240V 50/60Hz4. The input stream is the left and right channels of 24bit S/PDIF5. Supports playback with a sampling rate of 44.1 32.48—96KHz6. Audio input connection: Toslink, 1xRCA (coaxial)7. Audio output connection: 2xRCA (right/left), 3.5 stereo8. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio9. Can be used for home or professional audio switching, can convert coaxial or Toslink digital audio signals to analog audio, and can connect to peripherals such as power amplifiers through standard RCA style jacks10. Dimensions: 72 x 55 x 20mm11. Unit weight: 0.05kg

Read more less

1. Provides electronic noise reduction transmission2. Easy installation and simple operation3. Power input: AC 100-240V 50/60Hz4. The input stream is the left and right channels of 24bit S/PDIF5. Supports playback with a sampling rate of 44.1 32.48—96KHz6. Audio input connection: Toslink, 1xRCA (coaxial)7. Audio output connection: 2xRCA (right/left), 3.5 stereo8. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio9. Can be used for home or professional audio switching, can convert coaxial or Toslink digital audio signals to analog audio, and can connect to peripherals such as power amplifiers through standard RCA style jacks10. Dimensions: 72 x 55 x 20mm11. Unit weight: 0.05kg

Read more less

1. Provides electronic noise reduction transmission2. Easy installation and simple operation3. Power input: AC 100-240V 50/60Hz4. The input stream is the left and right channels of 24bit S/PDIF5. Supports playback with a sampling rate of 44.1 32.48—96KHz6. Audio input connection: Toslink, 1xRCA (coaxial)7. Audio output connection: 2xRCA (right/left), 3.5 stereo8. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio9. Can be used for home or professional audio switching, can convert coaxial or Toslink digital audio signals to analog audio, and can connect to peripherals such as power amplifiers through standard RCA style jacks10. Dimensions: 72 x 55 x 20mm11. Unit weight: 0.05kg

Read more less

1. Input: 3.5 Optical/Coaxial/Bluetooth/U Disk2. Output: RCA left and right channels/3.5 stereo3. Chip: Zhongke AB5301A4. Power supply interface: DC5V 2A5. Bluetooth: Bluetooth5.06. Dimensions: 70 x 82 x 27mm7. Housing: metal housing8. Packing list: host, antenna, USB power cable

Read more less

1.Channel output:2.0 channel, 3.5mm headphone jack output2.Support Audio Format:PCM3.Sampling Rate:192kHz 24bit4.Working Temperature:0-70℃5.Separating Degree:94DB6.Input: USB, SPDIF, Coaxial 7.Output: 3.5mm headphone jack, R/L 8.Volume and Bass adjustment

Read more less