Repair & Spare Parts

1. Back cover replacement for Samsung Galaxy S20 SM-G980 SM-G980F SM-G980F/DS 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Charging port board replacement for Samsung Galaxy A 8.0 (2019) / SM-T290. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy Tab A7 10.4 inch (2020) SM-T500 T505. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly (TFT material) for Samsung Galaxy A6 (2018) A600F. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material ) for Samsung Galaxy J6 (2018) 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. 3 in 1/set Bottom Rubber Cooling Mat + Screws + Screwdriver for Macbook Pro Retina A1398 A1502 A1425. 2. Replace your broken or unworkable part with a new one. 3. Each item has been checked and in good condition before shipping. 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Replacement back camera lens. 2. Replace the old, broken, cracked, damaged one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed7. Note: No Fingerprint Identification

Read more less

1. Camera set (Telephoto camera + wide camera + main camera) for Samsung Galaxy S21/S21 5G/S21+ 5G SM-G990U/G991U/G996U US version. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Samsung Galaxy A12 Nacho SM-A127F 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Samsung Galaxy A04s SM-A047 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A22 5G SM-A226. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Replacement back camera lens for Asus Zenfone 7 ZS670KS / 7 Pro ZS671KS. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Charging port board replacement for Nokia 7.1 / TA-1085. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Power jack connector for Lenovo Legion Rescuer Y7000 2019 Y530 Y545 Y540 Y7000P 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. Front-facing camera replacement part. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. 3 in 1 Gimbal flex cable for DJI Mavic Mini 2. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Compatible with most SSD protocols: This USB 3.2 enclosure supports PCI-E AHCI/NVME SSD protocol, making it compatible with most solid state drives on the market. It also uses the Jmicron JMB586A main control chip, with efficient and stable data transmission performance.2. High-speed data transfer: Support USB3.2 GEN2 x 2 protocol and 20Gbps transfer speed, this USB C 3.2 Gen2 SSD enclosure can achieve fast data transfer and backup, saving you time and effort.3. Type-C interface for quick connection: This usb c 3.2 gen2 ssd case uses Type-C female interface, which can quickly fit your MacBook Air/Pros USB-C port for high-speed data transfer and backup.4. Specially designed for Apple MacBook Air/Pro 2013-2017 SSD to ensure perfect fit and best performance.Parameter:1. Product size: 134.8 x 39.8mm/ 5.31 x 1.57 inches2. Product interface: Type-C female socket3. PCB color: black PCB4. Product rate (optional): 20Gbps dual-wire/10Gbps single-wire5. Support protocol: PCI-E AHCI/NVME SSD6. Main control chip: Jmicron JMB586A7. System support: WIN8/WIN10/WIN11/MAC/LINUX8. Warm reminder: 20Gbps needs to use the matching C-C cable. If you use the A-C cable to reach 10Gbps, the motherboard or notebook must support 20Gbps to run at the speed of 20Gbps.The following models are supported:-for 2013 Macbook Pro A1493 A1502(MD864 MD865 MD293 MD294) SSD-for 2013 Macbook Pro Retina A1398 A1502(ME864 ME865 ME866 ME293 ME294) SSD 2013 Macbook Air A1465 A1466-for (MD711 MD712 MD760 MD761) SSD 2014 Macbook Air-for A1465 A1466(MD711 MD712 MD760 MD761) SSD-for 2014 Macbook Pro Retina A1502 A1398(MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD-for 2015 Macbook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and for Pro ME253 MD878 SSD 2016-for 2016 Macbook Air A1465 A1466-for 2017 MacBook Air A1465 A1466

Read more less

1. Camera set (Telephoto camera + Depth camera + wide camera + main camera) for Samsung Galaxy S20 Ultra 5G SM-G988B. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. LCD flex cable ribbon replacement for Samsung Galaxy Tab A7 10.4 (2020) SM-T500 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Back cover replacement for Samsung Galaxy S20+ SM-G985 SM-G985F SM-G985F/DS 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Replace your broken or unworkable item with a new one. 2. Each item has been checked and in good condition before shipping. 3. Professional installation is highly recommended. We will not be responsible for any damages to your equipment that you may cause during the changing of replacement parts.

Read more less

1. Back cover replacement for OnePlus 6T 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. SIM card tray for Google Pixel 6. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Easy to install and easy to replace2. Purpose: Replace broken or inoperable arm shafts3. Material: metal4. Applicable products: Applicable to DJI Mini 4 Pro5. Maintenance of drones is complicated, please make sure you have professional maintenance skills or go to a professional maintenance departmentSpecification: General Compatible with DJI:  Mini 4 Pro Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 360 Carton Weight 6.12kgs / 13.49lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 360 pcs = 187200 pcs 40HQ: 1209 cartons * 360 pcs = 435240 pcs

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts. 6. Warning: - To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Non-destructive installation, simple and fast2. One-piece injection molding, the structure is firm, stable and durable3. Suitable for DJI Mavic Mini 2 / SE4. The real machine opens the mold, and the fit is stable5. Material: plastic6. Weight: 20g

Read more less

1. Replacement mode dial iron pad for Canon EOS 5D Mark III. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement for your defective or breakdown part. 2. Design for Nikon lens. the design makes it firmly on the lens. 3. You can put one lens reverse mount on another lens (front). 4. Compatible for Nikon AF-P DX 18-105mm f/3.5-5.6G ED VR lens 5. Material: plastic

Read more less

1. Back cover replacement for Samsung Galaxy S20 Ultra 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly (incell) for Samsung Galaxy A7 (2018) A750F/DS, A750G, A750FN/DS. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for Samsung Galaxy A51 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Li-ion battery replacement for Apple Watch Series 6 44mm. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Gimbal repair flex cable for DJI Mavic Pro 2. Completely fit and work 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G31/G41/G71 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G 5G Plus XT2075 XT2075-2 XT2075-3 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. LCD flex cable ribbon replacement for Macbook Pro 15 inch A1707 821-01270-01 821-01271-01 2016 2017 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Fingerprint sensor flex cable for Sony Xperia 10 III/ 10 II/5 II/1 III/5 III. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Charging port flex cable replacement for OnePlus 7 Pro. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for OnePlus 5T A5010 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less