Electronics Module Manual

1. Suitable for electronics enthusiasts, engineers, creators and people interested in wireless communication technology2. External subGhz module can be widely used in lot devices, smart home, remote control, wireless sensors and other fields3. Suitable for various devices and scenarios4. Increase the transmission and reception range of 433Mhz, allowing high-gain antenna to be replaced by yourself5. Size: 36x67mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 240 Carton Weight 9.50kgs / 20.94lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 240 pcs = 117600 pcs 40HQ: 1137 cartons * 240 pcs = 272880 pcs

Read more less

1. Module properties: synchronous rectification non-isolated buck constant current constant voltage module CC CV charging module2. Scope of application: high-power LED constant current drive, lithium battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride battery (battery pack) charging, solar panels, wind turbines3. Input voltage: 6-40VDC4. Output voltage: continuously adjustable (1.2-35VDC) below 32V for a long time (applicable to applications where the input voltage is higher than the output voltage and cannot be boosted)5. Output current: maximum 20A, long-term within 15A (please add a fan to dissipate heat when the power tube temperature exceeds 65 degrees, and use a reduced rating for high voltage output)6. Current limiting range: 0.2-20A (adjustment) please add a fan if the module exceeds 65 degrees7. Low voltage difference: 3V8. Operating frequency: 150KHZ9. Conversion efficiency: about 96% high, efficiency is related to voltage difference and use environment10. Output ripple: ripple about 50mV (excluding noise) 20M bandwidth (for reference only) input 24V measured11. Working temperature: -10 to +75 degrees Celsius (please pay attention to the power tube temperature in actual use, if the temperature is too high, please increase heat dissipation or use it at a reduced rating)12. Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)13. Output short circuit protection: yes (instantaneous protection) constant current (the current constant current value cannot be short-circuited for a long time)14. Input reverse connection protection: no15. Output anti-reverse current: no, for loads with self-power or inductive loads, an external diode is required!16. Wiring method: Wiring terminal17. Size: 60x53x30mm18. Weight: about 85 gramsOutput current adjustment method:1. Adjust the CV potentiometer to set the output voltage to the voltage value you need according to your load requirements2. Set the CC potentiometer counterclockwise for about 30 turns (that is, set the output current to a small value), connect the LED, and adjust the CC potentiometer to the current you need. For battery charging, discharge the battery, then connect it to the output, and adjust CC to the current you need (when used for charging, you must use a discharged battery to adjust it accurately, because the more power left in the battery, the smaller the charging current)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 7cm * 7cm * 6cm / 2.76inch * 2.76inch * 2.36inch Qty per Carton 175 Carton Weight 18.60kgs / 41.01lb Carton Size 51cm * 37cm * 32cm / 20.08inch * 14.57inch * 12.6inch Loading Container 20GP: 441 cartons * 175 pcs = 77175 pcs 40HQ: 1025 cartons * 175 pcs = 179375 pcs

Read more less

1. For IPROG+/IPROG+ Plus V7772. With reading and writing functions3. With protective shell design, not easy to damage4. Can adapt to your model well and help you solve problems5. Through exquisite craftsmanship and professional processing, the performance of the electronic chip is very good, and the file will not be easily damaged or lost6. Easy to operate, simply replace the original chip and the device programming chip has good adaptability7. Size: 5x5x5cm8. Weight: 0.45kgSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 7cm * 7cm * 7cm / 2.76inch * 2.76inch * 2.76inch Qty per Carton 140 Carton Weight 8.80kgs / 19.40lb Carton Size 51cm * 37cm * 30cm / 20.08inch * 14.57inch * 11.81inch Loading Container 20GP: 471 cartons * 140 pcs = 65940 pcs 40HQ: 1093 cartons * 140 pcs = 153020 pcs

Read more less

1. Designed for IProg+ programming unit, can meet your needs2. The electronic chip is made of high-quality metal ABS material, good quality, and safe to use3. Supports reading, writing and deleting the incremental area in 350806, 35080V6, 35080VP, 080D0WQ, 160D0WQ chips4. Compatible with 080 models, can adapt to your model well and help you solve the problem5. Through exquisite craftsmanship and professional processing, the performance of the electronic chip is very good, and it will not be easily damaged or lost files6. Easy to operate, simply replace the original chip with the device programming chip with good adaptability7. Size: 5x5x5cm8. Weight: 0.1kgSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 7cm * 7cm * 7cm / 2.76inch * 2.76inch * 2.76inch Qty per Carton 140 Carton Weight 16.50kgs / 36.38lb Carton Size 51cm * 37cm * 30cm / 20.08inch * 14.57inch * 11.81inch Loading Container 20GP: 471 cartons * 140 pcs = 65940 pcs 40HQ: 1093 cartons * 140 pcs = 153020 pcs

Read more less

1. It is very convenient to use. Just plug in USB or Micro USB to output adjustable voltage ranging from 1.2V to 24V2. One-click output shutdown3. The digital tube can be turned off4. It is adjusted by a multi-turn precision potentiometer5. It stores the state before power loss6. Input voltage: 3.5V - 12V7. Output voltage: 1.2V - 24V8. Output power:- Output voltage 1.2V - 2V, within 2W- Output voltage 2V - 20V, within 3W- Output voltage 20V - 24V, within 2.5W Notes for attention1. Connecting the output terminal to an LDO type voltage regulator will cause interference and increase the ripple, which may damage the chip2. This product is not a high-power power supply. Please use it within the specified rangeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 250 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 250 pcs = 112500 pcs 40HQ: 1045 cartons * 250 pcs = 261250 pcs

Read more less

Features:1. This is a laser ranging sensor based on TOF (time of flight) technology.2. Built-in controller and ranging algorithm, ranging range up to 25m/50m (optional), accuracy up to +/-3cm.3. Supports UART and I2C communication, with an ultra-small field of view (FOV), which makes the distance measurement range longer and the anti-light interference ability stronger, suitable for both indoor and outdoor environments.4. The anti-light interference ability is up to about 100KLUX illumination. It can be used as a distance measurement tool for distance detection, as a robot obstacle avoidance/route planning, and can also be used in fields such as ceiling detection and material level measurement.Product parameters:1. Typical ranging range: 0.05-25m/0.05-50m2. Typical ranging accuracy: 0.05-25m+/-3cm, 0.05-50m+/-3cm3. Wavelength: 905nm4. Field of view: 1-2 degrees5. Communication interface:Default UART (TTL signal line level 3.3V)I2C (supports multiple parallel connections, slave address is 0x08 + module D)I/O complementary level output (this mode cannot provide distance parameters)6. Communication baud rate:UART: 4.8Kbps-3000Kbps (default 921.6Kbps)2C: up to 400Kbps7. Power supply voltage: 4.3V-5.2V8. Product power consumption: 250mW (UART active output, power supply voltage 5.0V, current 50mA)9. Operating temperature: -10 to 60 degrees Celsius10. Product size: 22.7 x 28 x 13.6mm11. Product weight: 7.7gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 9.80kgs / 21.61lb Carton Size 34cm * 38cm * 50cm / 13.39inch * 14.96inch * 19.69inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs 40HQ: 958 cartons * 288 pcs = 275904 pcs

Read more less

1. Yahboom USB industrial AI vision camera features 5 million pixels, 2592x1944 ultra-high-definition 2K resolution, and a 105-degree wide-angle field of view. It captures distortion-free images at 30fps (MJPG format), making it ideal for real-time AI target detection and autonomous driving. The camera includes a high-speed driver-free USB 2.0 interface, supports standard UVC communication protocol and OTG extension, and comes with an integrated USB cable for plug-and-play operation. It delivers high-resolution imaging for advanced edge AI and robotics applications.2. Equipped with a 1/2.8-inch 5-megapixel sensor, it provides true 2592x1944 resolution and a 105-degree field of view. The custom optical lens eliminates distortion common in wide-angle cameras, supporting standard geometric image output for precise AI inference without software correction.3. It supports stable 30fps image output at maximum resolution in MJPG format, with multiple resolution/frame rate options. This high-throughput imaging ensures smooth video transmission for demanding visual tasks like object tracking, gesture recognition, and autonomous navigation, particularly when used with powerful edge devices like Jetson AGX Orin.4. Native UVC protocol support enables true plug-and-play on Linux (Raspberry Pi OS, Ubuntu), Windows, and Android platforms. No driver installation is required, allowing seamless integration with Jetson, RDK, and PC systems to reduce development costs.5. The fully enclosed aluminum alloy housing provides IP-level dust protection, passive heat dissipation, and mechanical shielding. Dual 1/4-inch mounting threads on the top and bottom allow flexible attachment to robots, tripods, or custom brackets, ensuring stability for field deployment. Parameters:1. Product board model: BL-500W-3352. Image sensor: 1/2.8 inch3. Pixel size: 2.0 micrometers x 2.0 micrometers4. Signal-to-noise ratio: 40 dB5. Low illumination: 0.001 Lux6. Dynamic range: 70 dB 7. Exposure time: 35 milliseconds8. Output format: MJPG/YUY29. Supported protocols: Standard UVC communication protocol, supports OTG conversion 10. Focusing method: Fixed focus11. Maximum effective pixels: 2592 x 1944 12. Output image format: MJPG, YUV (YUY2)13. Auto exposure control: Supported14. Auto white balance: Supported15. Adjustable parameters: Brightness, contrast, hue, saturation, sharpness, gamma, white balance, backlight contrast, gain, exposure, scrolling, low-light compensation16. Lens parameters: Focal length: 2.8 millimeters, D: 105 degrees, H: 81.8 degrees, V: 66 degrees 17. Interface type: USB 2.018. Power supply: 5V19. Working current: Less than or equal to 160 milliamperes20. Operating temperature: Minus 10 to 70 degrees Celsius 21. Storage temperature: Minus 20 to 85 degrees Celsius22. Cable length: 90 centimetersSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 64 Carton Weight 13.90kgs / 30.64lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 64 pcs = 35136 pcs 40HQ: 1275 cartons * 64 pcs = 81600 pcs

Read more less

STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8Description1. The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.2. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.3. The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through bootloader.4. The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.Key Features1. Stand-alone probe with modular extensions2. Self-powered through a Micro-B USB connector (does not provide power supply to the target application)3. USB 2.0 high-speed compatible interface4. Direct firmware update (DFU) support, to use with more future devices- JTAG / serial wire debugging (SWD) specific features:- 3V to 3.6 V application voltage support and 5 V tolerant inputs- Flat cables STDC14 to MIPI10 / STDC14 / MIPI20 (connectors with 1.27 mm pitch)- Flat cable for 20-pin JTAG/SWD (2.54 mm pitch) (extra free cable from Waveshare)- SWD and serial wire viewer (SWV) communication support5. SWIM specific features (only available with adapter board MB1440):- 1.65 V to 5.5 V application voltage support- SWIM header (2.54 mm pitch)- SWIM cables with dual 4-pin connectors / 4-pin connector to separated pins (2.54 mm pitch) (extra free cables from Waveshare)- SWIM low-speed and high-speed modes support6. Virtual COM port (VCP) specific features:- 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs- VCP frequency up to 15 MHz- Available on STDC14 debug connector (not available on MIPI10)7. Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:- 3 V to 3.6 V application voltage support and 5 V tolerant inputs- Signals available on adapter board only (MB1440)8. Drag-and-drop Flash programming9. Two color LEDs: communication, powerSupported Software1. STM32CubeProgrammer2. KEIL RVMDK3. IAR EWARM4. GCC-based IDEsSupported Devices1. All STM8 MCUs with SWIM interface2. All STM32 MCUs with JTAG / SWD interfacePackage Contents1. STLINK-V3SET x12. USB type A plug to micro B plug cable x13. 20-pin JTAG/SWD flat ribbon (extra free) x14. SWIM dual 4-pin connectors cable (extra free) x15. SWIM 4-pin connector to separated pins cable (extra free) x1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 15.00kgs / 33.07lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs 40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

Features:1. Using high-brightness 2048 RGB LED beads, full-color display, adjustable brightness2. Can display text, color pictures or animations3. A version using flexible PCB material is available, which can be bent appropriately and is suitable for some arc-shaped surface displays such as cylinders and spheres.4. There are two HUB75 interfaces onboard, one input is used to connect to the controller; one output can be cascaded to multiple screens.5. Provide open source information tutorials (Raspberry Pi/Pico/ESP32/Arduino sample programs, etc.)Product parameters:1. Pixel: 64x32=2048 DOTS2. Point pitch: 5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than or equal to 140°5. Control type: synchronization6. Driving mode: 1/16 scan7. Connector: HUB758. Power supply: 5V/4A (VH4 head input)9. Power: 20W10. Product size: 320 x 160 x 14.8mm11. Weight: 474 gramsPacking list:-RGB dot matrix screen x 1-Power adapter x 1-Flat wire x 1-Loose thread x 1-Screws x 4-Dupont cord x 1Specification: Package Weight One Package Weight 1.09kgs / 2.41lb One Package Size 36cm * 20cm * 5cm / 14.17inch * 7.87inch * 1.97inch Qty per Carton 12 Carton Weight 14.20kgs / 31.31lb Carton Size 38cm * 42cm * 32cm / 14.96inch * 16.54inch * 12.6inch Loading Container 20GP: 522 cartons * 12 pcs = 6264 pcs 40HQ: 1212 cartons * 12 pcs = 14544 pcs

Read more less

1. Suitable for electronics enthusiasts, engineers, creators and people interested in wireless communication technology2. Combining NRF24 and ESP32, one board can realize multiple functions, such as using NRF24 to realize NRF sniffer, mousejacker, using ESP32 to study Marauder, etc., and using dip switches to switch between modules3. Applicable to various devices and scenarios4. Packaging weight: 40g5. Packaging size: 10x6.5x4.5cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 120 Carton Weight 5.90kgs / 13.01lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs 40HQ: 1244 cartons * 120 pcs = 149280 pcs

Read more less

1. WIFI function expansion, default flash ESP32Marauder firmware, support SD card data storage2. 2.4G module expansion, support NRF sniffer and mouse hijacker functions3. High gain CC1101 module, ultra-wideband signal receiving and transmitting distance4. Applicable models: for flipper zero5. Packing weight: 61g6. Packing size: 13x8x2.5cmPacking list:1. Multi-function expansion board2. 2.4/5Ghz dual-band rubber stick antenna3. 40Mhz-6Ghz broadband telescopic antennaSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 13cm * 8cm * 3cm / 5.12inch * 3.15inch * 1.18inch Qty per Carton 120 Carton Weight 8.42kgs / 18.56lb Carton Size 41cm * 34cm * 32cm / 16.14inch * 13.39inch * 12.6inch Loading Container 20GP: 597 cartons * 120 pcs = 71640 pcs 40HQ: 1387 cartons * 120 pcs = 166440 pcs

Read more less

Features:1. Support USB expansion 8-way TTL (UART) with hardware flow control, can communicate simultaneously and independently2. Onboard self-recovery fuse and protection diode can ensure stable output of current and voltage, prevent overcurrent and overvoltage, and improve impact resistance3. Onboard TVS protection circuit can effectively suppress surge voltage and transient spike voltage in the circuit, lightning protection and anti-static4. Onboard level conversion circuit, surge protection, anti-static, stable and safe communication5. Onboard TTL serial port 3.3V and 5V level conversion circuit, can switch TTL communication level6. Aluminum alloy shell, oxidized frosted treatment, CNC numerical control opening, firm and durable, exquisite workmanship7. External 4 LED indicators, convenient for checking power supply and signal receiving and sending statusProduct parameters:1. Host interface: USB2. Device interface: TTL (UART)3. Communication range: 1200bps-2M4. Temperature range: -40 degrees Celsius to 85 degrees Celsius5. Humidity range: 5%RH-95%RH6. Operating system: Mac, Linux, Android, Windows11/10/8.1/8/77. Product size: 104.5 x 70 x 28.6mm-USB interfaceWorking level: 5VInterface type: USB-B type interfaceInterface protection: 200mA self-recovery fuse, ESD static protection-Power supply interfaceInterface type: 5VDC power socketInterface protection: overvoltage protection, reverse connection protection-TTL (UART) interfaceInterface type: 50PlN reverse connection interfaceInterface protection: TVS tube protection, surge and static protectionSerial port TTL level 3.3V/5V (adjustable)Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 56 Carton Weight 15.70kgs / 34.61lb Carton Size 32cm * 50cm * 37cm / 12.6inch * 19.69inch * 14.57inch Loading Container 20GP: 450 cartons * 56 pcs = 25200 pcs 40HQ: 1045 cartons * 56 pcs = 58520 pcs

Read more less

1. Number of degrees of freedom: 42. Workspace: horizontal diameter 1090mm (Max, 360 degrees omnidirectional), vertical range 798mm (Max)3. Working voltage: standard 12V 5A power supply, can be powered by 3S lithium battery pack4. Load capacity: 0.5kg@0.5m5. Repeat positioning accuracy: about +/-4mm (same load)6. Drive rotation speed: 40rpm (no load, no torque limit)7. Working range: BASE-360 degrees, SHOULDER-180 degrees, ELBOW-180 degrees, HAND-135 degrees/270 degrees8. Drive mode: TTL bus servo servo (TTL BUS SERVO), joint direct drive9. Number of drives: 510. Joint angle sensor: 12 bits 360-degree magnetic encoder11. Driver stall torque: 30KG.CM @12V12. Joint feedback information: driver status, joint angle, rotation speed, joint load, driver voltage, driver current, driver temperature, driver working mode13. Onboard master control: ESP32-WROOM-3214. Onboard master control module features: WiFi, BT, Dual Core, 240MHz15. Wireless control method: 2.4G-WiFi, ESP-NOW16. Wired control method: USB, UART17. Manual operation method: WEB control interface18. Machine operation method: Use UART/USB/ESP-NOW"/HTTP communication JSON data format instructions (currently, the ESP-NOW JSON instruction interaction in the routine has no feedback information, and cannot be used to execute instructions that will cause long-term blocking, such as: motion control with interpolation or playing long-term task files)19. Connectable host computer: Raspberry Pi, Jetson Orin Nano, PC and other devices that support USB connection. End effector function: default is the chuck function, which can be changed to an extra degree of freedom.20. LED fill light power: less than 1.5W21. OLED screen size: 0.91inch22. Other onboard functions: two 12V switches, 9-DOF IMU23. Robot arm weight: about 841g (excluding the table clamp)24. Table clamp weight: about 296g25. Table thickness supported by the table clamp: less than 72mm26. Robot arm routine function: three-dimensional rectangular coordinate system control (inverse kinematics control), dynamic external force adaptation control, joint angle control, work information feedback, FLASH file system operation, step recording and playback, ESP-NOW control, imitation mode (drag teaching), LED light control, onboard 12V switch control, WFi related function settings, setting the power-on task, bus servo related function settings, feedback mode settings, end assembly method settings, etc. Note: This is just a general introduction. For the specific functions and related instructions of the open source routines, please refer to WKI.Packing list:-Robot arm x 1-Charger x 1-Guide extension base x 1-Camera bracket x 1-End extension bracket x 1-Lightweight base x 1-Accessory bag x 1Specification: Package Weight One Package Weight 1.65kgs / 3.65lb One Package Size 56cm * 16cm * 14cm / 22.05inch * 6.3inch * 5.51inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 58cm * 34cm * 30cm / 22.83inch * 13.39inch * 11.81inch Loading Container 20GP: 450 cartons * 4 pcs = 1800 pcs 40HQ: 1046 cartons * 4 pcs = 4184 pcs

Read more less

1. Number of degrees of freedom: 42. Workspace: horizontal diameter 1090mm (Max, 360 degrees omnidirectional), vertical range 798mm (Max)3. Working voltage: standard 12V 5A power supply, can be powered by 3S lithium battery pack4. Load capacity: 0.5kg@0.5m5. Repeat positioning accuracy: about +/-4mm (same load)6. Drive rotation speed: 40rpm (no load, no torque limit)7. Working range: BASE-360 degrees, SHOULDER-180 degrees, ELBOW-180 degrees, HAND-135 degrees/270 degrees8. Drive mode: TTL bus servo servo (TTL BUS SERVO), joint direct drive9. Number of drives: 510. Joint angle sensor: 12 bits 360-degree magnetic encoder11. Driver stall torque: 30KG.CM @12V12. Joint feedback information: driver status, joint angle, rotation speed, joint load, driver voltage, driver current, driver temperature, driver working mode13. Onboard master control: ESP32-WROOM-3214. Onboard master control module features: WiFi, BT, Dual Core, 240MHz15. Wireless control method: 2.4G-WiFi, ESP-NOW16. Wired control method: USB, UART17. Manual operation method: WEB control interface18. Machine operation method: Use UART/USB/ESP-NOW"/HTTP communication JSON data format instructions (currently, the ESP-NOW JSON instruction interaction in the routine has no feedback information, and cannot be used to execute instructions that will cause long-term blocking, such as: motion control with interpolation or playing long-term task files)19. Connectable host computer: Raspberry Pi, Jetson Orin Nano, PC and other devices that support USB connection. End effector function: default is the chuck function, which can be changed to an extra degree of freedom.20. LED fill light power: less than 1.5W21. OLED screen size: 0.91inch22. Other onboard functions: two 12V switches, 9-DOF IMU23. Robot arm weight: about 841g (excluding the table clamp)24. Table clamp weight: about 296g25. Table thickness supported by the table clamp: less than 72mm26. Robot arm routine function: three-dimensional rectangular coordinate system control (inverse kinematics control), dynamic external force adaptation control, joint angle control, work information feedback, FLASH file system operation, step recording and playback, ESP-NOW control, imitation mode (drag teaching), LED light control, onboard 12V switch control, WFi related function settings, setting the power-on task, bus servo related function settings, feedback mode settings, end assembly method settings, etc. Note: This is just a general introduction. For the specific functions and related instructions of the open source routines, please refer to WKI.Packing list:-Robot arm x 1-Charger x 1-Guide extension base x 1-Camera bracket x 1-End extension bracket x 1-Lightweight base x 1-Accessory bag x 1Specification: Package Weight One Package Weight 1.65kgs / 3.65lb One Package Size 56cm * 16cm * 14cm / 22.05inch * 6.3inch * 5.51inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 58cm * 34cm * 30cm / 22.83inch * 13.39inch * 11.81inch Loading Container 20GP: 450 cartons * 4 pcs = 1800 pcs 40HQ: 1046 cartons * 4 pcs = 4184 pcs

Read more less

1. Number of degrees of freedom: 42. Workspace: horizontal diameter 1090mm (Max, 360 degrees omnidirectional), vertical range 798mm (Max)3. Working voltage: standard 12V 5A power supply, can be powered by 3S lithium battery pack4. Load capacity: 0.5kg@0.5m5. Repeat positioning accuracy: about +/-4mm (same load)6. Drive rotation speed: 40rpm (no load, no torque limit)7. Working range: BASE-360 degrees, SHOULDER-180 degrees, ELBOW-180 degrees, HAND-135 degrees/270 degrees8. Drive mode: TTL bus servo servo (TTL BUS SERVO), joint direct drive9. Number of drives: 510. Joint angle sensor: 12 bits 360-degree magnetic encoder11. Driver stall torque: 30KG.CM @12V12. Joint feedback information: driver status, joint angle, rotation speed, joint load, driver voltage, driver current, driver temperature, driver working mode13. Onboard master control: ESP32-WROOM-3214. Onboard master control module features: WiFi, BT, Dual Core, 240MHz15. Wireless control method: 2.4G-WiFi, ESP-NOW16. Wired control method: USB, UART17. Manual operation method: WEB control interface18. Machine operation method: Use UART/USB/ESP-NOW"/HTTP communication JSON data format instructions (currently, the ESP-NOW JSON instruction interaction in the routine has no feedback information, and cannot be used to execute instructions that will cause long-term blocking, such as: motion control with interpolation or playing long-term task files)19. Connectable host computer: Raspberry Pi, Jetson Orin Nano, PC and other devices that support USB connection. End effector function: default is the chuck function, which can be changed to an extra degree of freedom.20. LED fill light power: less than 1.5W21. OLED screen size: 0.91inch22. Other onboard functions: two 12V switches, 9-DOF IMU23. Robot arm weight: about 841g (excluding the table clamp)24. Table clamp weight: about 296g25. Table thickness supported by the table clamp: less than 72mm26. Robot arm routine function: three-dimensional rectangular coordinate system control (inverse kinematics control), dynamic external force adaptation control, joint angle control, work information feedback, FLASH file system operation, step recording and playback, ESP-NOW control, imitation mode (drag teaching), LED light control, onboard 12V switch control, WFi related function settings, setting the power-on task, bus servo related function settings, feedback mode settings, end assembly method settings, etc. Note: This is just a general introduction. For the specific functions and related instructions of the open source routines, please refer to WKI.Packing list:-Robot arm x 1-Charger x 1-Guide extension base x 1-Camera bracket x 1-End extension bracket x 1-Lightweight base x 1-Accessory bag x 1Specification: Package Weight One Package Weight 1.65kgs / 3.65lb One Package Size 56cm * 16cm * 14cm / 22.05inch * 6.3inch * 5.51inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 58cm * 34cm * 30cm / 22.83inch * 13.39inch * 11.81inch Loading Container 20GP: 450 cartons * 4 pcs = 1800 pcs 40HQ: 1046 cartons * 4 pcs = 4184 pcs

Read more less

Features:1. Onboard BMP390 sensor, can measure atmospheric pressure, altitude and temperature2. Support I2C interface communication, can set I2C address, support I2C bus cascade3. Support SPI interface communication, default is I2C interface, SPI can be enabled through CS chip select4. Onboard level conversion circuit, compatible with 3.3V/5V working levelProduct parameters:1. Function: monitor atmospheric pressure, altitude, temperature2. Application field: smart home3. Communication interface: I2C / SPI4. Air pressure measurement range: 300-1250hPa5. Absolute air pressure accuracy: +/-0.5hPa (@300-1100hPa, 0 to 65 degrees Celsius)6. Relative air pressure accuracy: +/-0.3hPa (@700-1100hPa, 25 to 40 degrees Celsius)7. Temperature offset coefficient: +/-0.6Pa/K (@900hPa, 25 to 40 degrees Celsius)8. Temperature absolute accuracy: +/-0.5 degrees Celsius (0 to 65 degrees Celsius)9. Supported sampling rate: 200Hz10. Operating temperature: -40 to 85 degrees Celsius11. Product size: 32 x 20mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 288 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 34cm * 50cm / 12.6inch * 13.39inch * 19.69inch Loading Container 20GP: 490 cartons * 288 pcs = 141120 pcs 40HQ: 1137 cartons * 288 pcs = 327456 pcs

Read more less

1. Conventional BOOST fully integrated constant voltage output program, internal integration of MOSFET, less peripheral devices, low system cost2. Wide voltage range input, input voltage up to 35V3. Adjustable output voltage, high support 40V4. Built-in over-temperature protection, over-current protection, a full set of reliability protection circuit, high reliability5. System conversion efficiency can reach more than 90 percent, convenient for thermal design6. Standard package, suitable for boosting applications within 30WModule use1. Access to the power supply (3-35V), the power indicator light, the module works normally2. Adjust the blue potentiometer knob (generally counterclockwise rotation of the boost, clockwise rotation of the buck) and use a multimeter to monitor the output voltage to reach the required voltageParameters:1. Module nature: non-isolated boost2. Rectification mode: non-synchronous rectification3. Input range: limit value 3-40V; recommended value 3-35V4. Output range: limit value 5-45V; recommended value 5-40V (by rotating potentiometer)5. Input current: limit value 0-5A; recommended value 0-3A6. Conversion efficiency: 94 percent MAX7. Switching frequency: 220KHz8. Output ripple: less than 100mV9. Load regulation rate: +/-0.5 percent10. Voltage regulation: +/-0.5 percent11. Operating temperature: limit value -40-150 degrees celsius; recommended value -20-85 degrees celsius12. Reverse connection protection: input 40V anti-reverse connection protectionAttention:1. Vehicle voltage regulator, only need to connect the input of this module to the power supply, you can adjust the potentiometer, the output voltage can be adjusted arbitrarily in the 5V-30V, for your cell phone, MP3, MP4, PSP charging, and many other devices powered2. Long time work is recommended to use the current within 2.5A, plus heat sink (10W or more output); because it is a boost module, in order to ensure stable output, please keep a small 1.5V differential pressure3. To electronic equipment power supply, when the equipment needs 5V-35V power supply and the corresponding voltage power supply in hand, with this module you can easily adjust the voltage to the required voltage, to solve the trouble4. System operating voltage test, do the project can use this module to debug a variety of voltage test system operating voltage rangeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 5cm * 3cm / 2.76inch * 1.97inch * 1.18inch Qty per Carton 330 Carton Weight 11.00kgs / 24.25lb Carton Size 37cm * 35cm * 32cm / 14.57inch * 13.78inch * 12.6inch Loading Container 20GP: 643 cartons * 330 pcs = 212190 pcs 40HQ: 1493 cartons * 330 pcs = 492690 pcs

Read more less

1. Module nature: non-isolated boost module2. Input voltage: DC8.5-50V3. Input current: 15A ((MAX) more than 8A please strengthen the heat dissipation)4. Static operating current: 10mA (12V to 20V, the higher the output voltage, the static current will increase)5. Output voltage: 19V6. Output current: 12A (MAX) over 7A, please strengthen the heat dissipation7. Operating temperature: -40-85 degrees celsius8. Operating frequency: 150KHz9. Conversion efficiency: 96 percent MAX10. Overcurrent protection: yes (input more than 15A, automatically reduce the output voltage, there is a certain error range)11. Input reverse connection protection: no12. Constant current range: 0.2-12A13. Installation mode: four 2.5mm screws14. Output mode: wired output15. Size: 67 x 48 x 28mm16. Weight: 60gSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 270 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 270 pcs = 118260 pcs 40HQ: 1018 cartons * 270 pcs = 274860 pcs

Read more less

1. DFPlayer Mini MP3 module, can be directly connected to speakers2. Module with power supply battery, speakers, buttons can be used alone, can also be controlled through the serial port, as a module for Arduino UNO or any microcontroller with a serial port3. The module itself integrates MP3, WAV, WMA hard decoding, while the software supports TF card driver, FAT16, FAT32 file system4. Through a simple serial port command can be completed to play the specified music, and how to play music and other functions, without the need for cumbersome underlying operations, easy to use, stable and reliable5. Weight: about 2.8g6. Size: about 3 x 3cmTechnical specifications:1. Support sample rate (KHz): 8/11.025/12/16/22.05/24/32/44.1/482. 24-bit DAC output, dynamic range support: 90dB, signal-to-noise ratio support: 85dB3. Fully support FAT16, FAT32 file system, support for 32G TF card, support for 32G U disk, 64M bytes of NORFLASH4. Various control modes are available. IO control mode, serial port mode, AD button control mode5. The broadcast language insertion function, you can pause the background music being played, the advertisement is played back to the background sound to continue playing6. Audio data sorted by folder, support up to 100 folders, every other folder can be assigned 255 tracks7. 30 levels of volume adjustable, 6 levels of EQ adjustableApplications:1. Vehicle navigation voice announcement2. Highway transportation inspection, toll booth voice prompts3. Train station, bus station inspection voice prompts4. Power, communication, financial business hall voice prompts5. Vehicle in and out of the channel verification voice prompts6. Border control channel voice prompts7. Multi-channel voice alarm or equipment operation guidance voice8. Electric sightseeing car traveling voice notification9. Automatic alarm for electromechanical equipment failure10. Voice alarm for fire fighting11. Automatic broadcasting equipment, timed broadcastingSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1800 Carton Weight 6.50kgs / 14.33lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 1800 pcs = 936000 pcs 40HQ: 1209 cartons * 1800 pcs = 2176200 pcs

Read more less

1. Support WiFi Scanner firmware and Deauther v2 firmware2. Can be plugged into the Flipper Zero with Deauther firmware, and can also be used as a standalone esp8266 development board3. Type-C interface, serial chip using ch340c, and joined the automatic burning circuit, Type-C connected to the computer can be burned directly to the firmware, all IO ports lead, fully compatible with the NodeMCU4. Simple and compact structure, easy to install and connect, stable performance, low interference5. Package weight: 25g6. Package size: 10 x 6.5 x 4.5cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 150 Carton Weight 6.00kgs / 13.23lb Carton Size 51cm * 37cm * 32cm / 20.08inch * 14.57inch * 12.6inch Loading Container 20GP: 441 cartons * 150 pcs = 66150 pcs 40HQ: 1025 cartons * 150 pcs = 153750 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V~240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC12V4A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 200gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 15.60kgs / 34.39lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V~240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC12V4A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 200gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 15.60kgs / 34.39lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC9V 5A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 220g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 17.00kgs / 37.48lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC24V 2A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 180g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 14.40kgs / 31.75lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC24V 2A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 180g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 14.40kgs / 31.75lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V~240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC12V4A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 200gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 15.60kgs / 34.39lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC24V 2A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 180g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 14.40kgs / 31.75lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC9V 5A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 220g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 17.00kgs / 37.48lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. Plug type: US Plug, EU Plug, UK Plug2. Power cord specifications: line length about 1.2m, outer diameter 5.5mm, inner diameter 2.1mm, DC jack3. Protection circuit: short circuit/overvoltage/overcurrent protection4. Input parameters: AC100V-240V 50Hz/60Hz, no-load low standby power consumption5. Output parameters: DC9V 5A, low ripple6. Safety certification: UL/CUL, CE, TUV, SAA, GS7. Product size: about 89.4 x 47.4 x 23.5mm8. Weight: about 220g9. This product is measured manually, and there may be an error of 0.1-0.2mm and 0.1-0.2g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!10. Note: Only the power adapter is shipped, nothing else!Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 63 Carton Weight 17.00kgs / 37.48lb Carton Size 44cm * 32cm * 37cm / 17.32inch * 12.6inch * 14.57inch Loading Container 20GP: 511 cartons * 63 pcs = 32193 pcs 40HQ: 1188 cartons * 63 pcs = 74844 pcs

Read more less

1. DOGZILLA-Lite is a 15-DOF desktop AI bionic robot dog. It is made of aluminum alloy and comes with a robotic arm and gripper, which can flexibly perform grasping tasks. Built-in Raspberry Pi CM4 module, supports face detection, object recognition, and AI visual interaction. Combined with a large model, it can not only understand instructions, but also realize free dialogue, realizing true multimodal intelligent interaction. It has advanced sports capabilities such as omnidirectional movement, six-dimensional posture control, and dynamic balance. With more than 40+ functions, from basic remote control to embodied intelligent applications, it allows learning, entertainment, and technology research to be fully upgraded. In front of the robot dog, a 2.0-inch IPS display is integrated to display 35 different expressions.Support two control methods: BT APP and WiFi APP. Whether it is programming learning, AI experiments, or creative interaction, DOGZILLA-Lite is your best partner.2. 15-DOF bionic design: 12DOF 4-legged + 3DOF robotic arm, flexible grasping, precise control.3. Flexible and stable posture: 15 high-precision 2.3KG·CM bus servos, integrated 6-axis IMU attitude sensors, combined with advanced inverse kinematics algorithms, accurately simulate the motion trajectory of biological joints.4. AI vision + large model interaction: Raspberry Pi CM4 + large model, supports AI visual recognition, object detection, and intelligent dialogue.5. 40+ functions: DOGZILLA-Lite pre-installed with a GUI program, users can experience it directly and quickly after getting it.6. Dual APP control: BT APP controls the movement and robotic arm, WiFi APP real-time image transmission, experience FPV control.7. 2.0-inch IPS expression screen: Can not only display the interface of large model interaction in real time, but also integrates 35 dynamic expressions.Parameters:1. Architecture: Upper computer: Raspberry Pi CM4 module; Lower computer: ESP322. Material: The body is made of 1mm aviation aluminum alloy, and the foot end is made of ABS3. Battery: 7.4V 2500mAh lithium battery4. Servo model: Bus serial servo x15 Servo torque 2.3KG·CM5. Gripping range of the gripper: 14.4-53.6mm6. Screen: 320×240 pixel full color IPS7. Camera: 5 million pixels OV56478. Speaker: 8Ω 2W cavity speaker9. Microphone: Dual MEMS digital microphone10. Storage: 32GB TF card11. Charging port: Type-C 5V12. Charging time: 2.5 hours13. Endurance time: 3 hours14. Weight: about 575gSpecification: Package Weight One Package Weight 1.90kgs / 4.20lb One Package Size 37cm * 27cm * 22cm / 14.57inch * 10.63inch * 8.66inch Qty per Carton 2 Carton Weight 4.90kgs / 10.80lb Carton Size 37cm * 27cm * 42cm / 14.57inch * 10.63inch * 16.54inch Loading Container 20GP: 635 cartons * 2 pcs = 1270 pcs 40HQ: 1475 cartons * 2 pcs = 2950 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 10.70kgs / 23.59lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 8.30kgs / 18.30lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 5.90kgs / 13.01lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 8.30kgs / 18.30lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 10.70kgs / 23.59lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 5.90kgs / 13.01lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 8.30kgs / 18.30lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Two-dimensional electric pan-tilt, specially designed for electronic design competitions, available in one or two degrees of freedom, and with optional servo configurations (suggestions for selection: 1. For projects that only require horizontal rotation, choose one degree of freedom; for projects that require both horizontal and vertical rotation, choose two degrees of freedom. 2. Users who already have servos can purchase the version without servos, and the bracket is compatible with most similar servos on the market.)2. Equipped with industrial-grade deep groove ball bearings: Both one and two-degree-of-freedom pan-tilts are standard with industrial-grade deep groove ball bearings, ensuring smooth and stable rotation, flexible and effortless control, and strong load-bearing capacity. (Without considering the load-bearing capacity of the upper layer, the standard 20KG servo on the lower layer can support a 10KG load.)3. Made of all-aluminum alloy materials: Anodized aluminum alloy, 2mm thick, with a CNC aluminum alloy servo plate, precise, sturdy and durable.4. Multiple mounting holes provided: The two-dimensional electric pan-tilt bracket offers multiple M3 mounting holes. The top supports the installation of various sensors, cameras, and other electronic devices; the middle layer can support the installation of various sensors, cameras, and other electronic devices when the upper layer servo is not installed. The bottom has four M3 fixed copper columns that allow the pan-tilt to be installed on robots, carts, or desks as a whole.5. Rich development materials are included, and 3D model files are provided.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 24 Carton Weight 5.90kgs / 13.01lb Carton Size 32cm * 32cm * 42cm / 12.6inch * 12.6inch * 16.54inch Loading Container 20GP: 620 cartons * 24 pcs = 14880 pcs 40HQ: 1439 cartons * 24 pcs = 34536 pcs

Read more less

1. Air Mouse Functionality: The WiFi multiboard features the Flipper Zero Air Mouse module, based on circuit diagrams provided by respected developers on GitHub. It uses the Bosch BMI160 sensor to implement gesture mouse functionality.2. Compatibility: The development board works perfectly with both Bluetooth and wired devices, offering flexibility and convenience in usage across a range of digital platforms.3. Firmware Customization: For the mouse module, you would need to compile the corresponding fap software based on the firmware version or use the fap factory website (flipc.org) to select the firmware and generate fap, offering opportunities for personalization and upgrade.4. Updated Design: The demo board is designed with an upgraded green PCB from the previous yellow one, enhancing its aesthetic and functional appeal.5. Compact and Portable: The development board is compact and lightweight, making it easy to carry and store. It is perfect for those who need functional and portable tech on the go.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 250 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 250 pcs = 118000 pcs 40HQ: 1096 cartons * 250 pcs = 274000 pcs

Read more less

1. Input voltage: 4-13V (USB male, MicroUSB, Type-C 3 input interfaces)2. Output voltage: 1-30V (Quick terminal output, USB female output, note that the two are directly connected, carefully check the output voltage before inserting the USB device!)3. Output current: 0-2A (In constant voltage mode, the output current is adaptive according to the load size and is not adjustable. If you set the limit current to 1A, then when the load current is greater than 1A, it automatically enters the constant current mode with a maximum output of 1A)4. Output power: less than 15W (When the output power is greater than 15W, the output is automatically shut down and OPP is displayed. After reducing the load power, press the ON/OFF button to solve it. When the input current is too large, it may not work for a long time above 10W due to temperature protection)5. Voltage display: resolution 0.01V, accuracy +/-0.1V, no reserve, self-calibration6. Current display: resolution 0.001A, range 0-2.2A, accuracy +/-0.05A, no reserve, self-calibration7. Power display: 0.00W-15.0W8. Temperature protection: When the power element temperature is higher than 100 degrees Celsius, it enters OTP protection. After reducing the load power, press the ON/OFF key to solve it (power within 10W for long-term operation generally will not enter OT protection. When the input current is greater than 3A, it may enter over-temperature protection when working for a long time. Even if it does not reach 15W, it is recommended to use an adapter with fast charging function)9. Working current: about 30mA10. Charging anti-backflow: support, can be directly connected to the battery for charging, no need to add a diode11. Short circuit protection: support12. Weight: about 44g13. Size: about 8 x 4 x 1.83cmFeatures:1. LCD displays input voltage, output voltage, current, power, and capacity statistics, with a voltage resolution of 0.01V and a current resolution of 0.001A2. With USB female output, it is convenient to connect USB fan and other USB interface devices3. Screw-free quick wiring terminal, push-type wiring and wire pulling, no need to screw, convenient and fast4. When setting the current limit value (constant current), there is no need to short-circuit or use a multimeter, and the current limit value can be directly displayed5. With intelligent fast charging deception, it solves the problem of insufficient power supply of the USB input port, supports mainstream fast charging protocols QC2.0 3.0, FCP SCP AFC, and can also choose not to deceive or automatically select deception mode6. High power 15W, 2A current, can be used for fan speed regulation, desktop power supply, adjustable charger, router power supply, etc.7. Adjust the output voltage arbitrarily, limit the current 0-2A (wide input 4-13V, wide output 1-30V arbitrarily adjustable, with short-circuit protection, short-circuit will not burn)8. Used as a USB charging cable, the charging voltage and charging current can be adjusted at will (any voltage, with constant current and anti-backflow, to meet the charging needs of most batteries)9. Multiple protections, short circuit, over-current, over-temperature, over-power, over-voltage protection, charging anti-backflow protectionSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 210 Carton Weight 15.80kgs / 34.83lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 210 pcs = 91980 pcs 40HQ: 1018 cartons * 210 pcs = 213780 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.60kgs / 23.37lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G32. NPU: 1TOPS3. Memory: 256MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirementsSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 480x480 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 380:1 11. Viewing angle: 160 degrees 12. Appearance size: 84.2x84.2mm 13. Display size: 71.86x70.18mm 14. Point spacing: 0.1497x0.1462mmSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G2 2. NPU: 0.5TOPS 3. Memory: 128MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.60kgs / 23.37lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G3 2. NPU: 1TOPS 3. Memory: 256MB DDR3L 4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform. 5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications 6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient 7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU 8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS 9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms 10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume. 11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements 12. Reserve PoE module interface, making the power supply method of the development board more flexible 13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and powered Screen parameters: 1. Communication interface: RGB666 2. Resolution: 720x720 3. Communication interface: RGB666 4. Screen size: 4 inches 5. Display panel: IPS 6. Touch type: Capacitor 7. Touch chip: GT911 8. Brightness: 400cd/m2 9. Working temperature: -20~70 degrees Celsius 10. Contrast: 1000:1 11. Viewing angle: 170 degrees 12. Appearance size: 84.0x84.0mm 13. Display size: 0.0999x0.0999 mm 14. Point spacing: 0.1497x0.1462mm 15. Color Gamut: 68% NTSCSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 10.50kgs / 23.15lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Processor: RV1106G22. NPU: 0.5TOPS3. Memory: 128MB DDR3L4. Based on the RV1106 series chip, it has a cost-effective Linux development board, aiming to provide developers with a simple and efficient development platform.5. Supports multiple interfaces, including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB and other interfaces, which are very suitable for embedded applications6. Support capacitive touch with screen, which is sensitive to reaction, increases the convenience of development, and intuitive screen operation, making development more convenient7. Single-core ARM Cortex-A7 32-bit core, integrating NEON and FPU8. Built-in Ruxin Micros self-developed 4th generation NPU, high computing accuracy, supports mixed quantization of int4, int8, and int16, RV1106G3 int8 computing power is 1TOPS, RV1106G2 int8 computing power is 0.5TOPS9. Built-in self-developed third-generation ISP3.2, supports 5 million pixels, supports HDR, WDR, multi-level noise reduction and other image enhancement and correction algorithms10. It has powerful encoding performance, supports intelligent encoding, and saves code streams according to the scene adaptively. It saves more than 50% of the code rate than the conventional CBR mode. It can not only shoot high-definition images, but also have a smaller video volume.11. Built-in 16-bit DRAM DDR3L to meet demanding memory bandwidth requirements12. Reserve PoE module interface, making the power supply method of the development board more flexible13. Connecting only one network cable to PoE device allows the Luckfox Pico Ultra series to be connected and poweredSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 130 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 130 pcs = 67210 pcs 40HQ: 1201 cartons * 130 pcs = 156130 pcs

Read more less