TV Receiver

1. Can provide visually lossless 4K video streaming, up to 60 frames/second. 2. Wireless transmission, linear transmission distance up to 30 meters. 3. 4K lossless, zero-delay transmission, minimizing image lag. 4. No need to install drivers, no settings, no need to connect to WiFi, just power on and use directly. 5. Support surround sound effects and support CEC or AVC commands. 6. The transmitter box and the receiver box must be used as a pair. Product specifications: 1. Bandwidth: 7Gbps. 2. Intermediate frequency: 60GHz (59-66GHz). 3. RF power: 10dBm. 4. Security protocol: HDCP. 5. Delay time: less than 5ms. 6. Transmission distance: 30m. (Blocked by obstacles will shorten the transmission distance) 7. Average power consumption: transmitter/receiver maximum 2.5W. 8. Interface: HDMI type A. 9. Power supply: Micro USB B, 5V 1A. 10. Working temperature: 0-45 degrees Celsius. 11. Dimensions: 87x87x21mm. 12. Net weight: 290g. Packaging accessories: Transmitter x 1 Receiver x 1 Instructions x 1 Power supply x 2

Read more less

1. Provides a lossless 1080P video stream up to 60 frames per second. 2. Wireless transmission, the linear transmission distance can reach 30 meters. 3. 1080P lossless, zero delay transmission, minimizing image lag. 4. No need to install drivers, no need to set up, no need to connect to WiFi, power on directly. 5. Supports surround sound and supports CEC or AVC commands. 6. The transmitter box and receiver box must be used in a pair. Product specifications: 1. Bandwidth: 7Gbps. 2. Intermediate frequency: 60 GHz (59-66 GHz). 3. RF power: 10dBm. 4. Security Agreement: HDCP. 5. Delay time: less than 5ms. 6. Transmission distance: 30m. 7. Average power consumption: transmitter/receiver maximum 2.5W. 8. Interface: HDMI Type A. 9. Power: Micro USB B, 5V 1A. 10. Operating temperature: 0-45 degrees Celsius. 11. Size: 87x87x21mm. 12. Net weight: 290g. Packaging accessories: Transmitter x 1 Receiver x 1 Instruction manual x 1 Power supply x 2

Read more less

1. Provides a lossless 1080P video stream up to 60 frames per second. 2. Wireless transmission, the linear transmission distance can reach 30 meters. 3. 1080P lossless, zero delay transmission, minimizing image lag. 4. No need to install drivers, no need to set up, no need to connect to WiFi, power on directly. 5. Supports surround sound and supports CEC or AVC commands. 6. The transmitter box and receiver box must be used in a pair. Product specifications: 1. Bandwidth: 7Gbps. 2. Intermediate frequency: 60 GHz (59-66 GHz). 3. RF power: 10dBm. 4. Security Agreement: HDCP. 5. Delay time: less than 5ms. 6. Transmission distance: 30m. 7. Average power consumption: transmitter/receiver maximum 2.5W. 8. Interface: HDMI Type A. 9. Power: Micro USB B, 5V 1A. 10. Operating temperature: 0-45 degrees Celsius. 11. Size: 87x87x21mm. 12. Net weight: 290g. Packaging accessories: Transmitter x 1 Receiver x 1 Instruction manual x 1 Power supply x 2

Read more less

1. Provides a lossless 1080P video stream up to 60 frames per second. 2. Wireless transmission, the linear transmission distance can reach 30 meters. 3. 1080P lossless, zero delay transmission, minimizing image lag. 4. No need to install drivers, no need to set up, no need to connect to WiFi, power on directly. 5. Supports surround sound and supports CEC or AVC commands. 6. The transmitter box and receiver box must be used in a pair. Product specifications: 1. Bandwidth: 7Gbps. 2. Intermediate frequency: 60 GHz (59-66 GHz). 3. RF power: 10dBm. 4. Security Agreement: HDCP. 5. Delay time: less than 5ms. 6. Transmission distance: 30m. 7. Average power consumption: transmitter/receiver maximum 2.5W. 8. Interface: HDMI Type A. 9. Power: Micro USB B, 5V 1A. 10. Operating temperature: 0-45 degrees Celsius. 11. Size: 87x87x21mm. 12. Net weight: 290g. Packaging accessories: Transmitter x 1 Receiver x 1 Instruction manual x 1 Power supply x 2

Read more less

1. Provides a lossless 1080P video stream up to 60 frames per second. 2. Wireless transmission, the linear transmission distance can reach 30 meters. 3. 1080P lossless, zero delay transmission, minimizing image lag. 4. No need to install drivers, no need to set up, no need to connect to WiFi, power on directly. 5. Supports surround sound and supports CEC or AVC commands. 6. The transmitter box and receiver box must be used in a pair. Product specifications: 1. Bandwidth: 7Gbps. 2. Intermediate frequency: 60 GHz (59-66 GHz). 3. RF power: 10dBm. 4. Security Agreement: HDCP. 5. Delay time: less than 5ms. 6. Transmission distance: 30m. 7. Average power consumption: transmitter/receiver maximum 2.5W. 8. Interface: HDMI Type A. 9. Power: Micro USB B, 5V 1A. 10. Operating temperature: 0-45 degrees Celsius. 11. Size: 87x87x21mm. 12. Net weight: 290g. Packaging accessories: Transmitter x 1 Receiver x 1 Instruction manual x 1 Power supply x 2

Read more less

1. Desk workstation to save home and office space2. Promoting wellness and productivity in daily routine and home entertainment.3. Extendand folderable keyboard tray gain room space.4. Sitting or standing working positions as your choice.5. Casted aluminum alloy with fine polished and powder coated in black or white.6. Ergonomic comfort to relieve eyes, neck and back strain.Specification:1. Model Number: L100 2. Material: Aluminum Alloy+ABS 3. Color: Black 4. TV Screen Size: 22-27 inch5. Tilt: +5 degree ~-5 degree6. Rotation: 360 degree7. Load Capability: 11kgs 8. Height Adjustable: 450mm 9. VESA Size (HxV): 75x75/100x100mm10. Product Usage: Home, Office, etc.

Read more less

1. Full motions flexibility with all directional effortless adjustment without tools used2. Durable gas-strut cylinder and conical joints constructed for smooth and stable operation3. Ergonomic design concept relax your life4. Integrated cable management conceals inside provide clean ,neat and clutter-free appearance5. Compact and retractable design increase your work spaceSpecification:1. Model: Monitor Desk Stand G322. Fit For: 22 inch to 32 inch displays3. Support load: From 4.4 to 33 lbs (2-15 kg)4. VESA compliant: 75x75, 100x100 mm5. Upright lift distance: 12.6 inch (320mm)6. Rotation: 360 degree7. Swivel: +/- 90 degree8.Tilt angle: +85 degree to -30 degree9. Vertical extension: 24.8 inch (630mm)

Read more less

1. The wall plate cover and cable hidden system of tv mount looked more luxury and nice, also made the TV cable behind your TV neatly2. With this full-motion tv mount, you can be easy to fix, tilt, extend, fold and rotate your TV and any viewing angle whatever you wanted3. Good technologies design make viewing angle easy and convenient4. Our standard Accessories enable you to extend tv mounting distance from 200 x 200mm to 600 x 400mm.Specification:1. Model: P652. Applicable size: 55-85 inches3. Stretching distance: 60-500mm4. Tilt adjustment: +8 degree /-5 degree5. Bearing range: 68.2kg6. Horizontal fine adjustment: +/- 4 degree7. Rotation angle: 180 degree8. Support hole spacing: 200 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400, 600 x 400mm

Read more less

1. The one-piece panel is simple and easy to operate.2. The key parts are thickened, the structure is stable, and the ability to withstand weight is strong.3. Safety screw design ensures no offset under load.4. Applicable scope: Suitable for most HDTV flat screen TVs, LCD TVs, LED TVs, plasma TVs. Specification:1. Model: NB SP22. Material: High quality SPCC cold rolling steel3. Screen size: 40-70 inch4. Tilt: -5 degree ~ +15 degree5. Swivel: -90 degree~ +90 degree (TV Size below 52 inch can swivel 90 degree)6. Rotation: -3 degree~ +3 degree7. Loading: 150lbs (68.2kgs)8. Wall distance: 110-712mm9. VESA: 200 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400, 600 x 400mm

Read more less

1. Desk workstation to save home and office space2. Promoting wellness and productivity in daily routine and home entertainment.3. Extend, retract and folderable keyboard tray gain room space.4. Sitting or standing working positions as your choice.5. Casted aluminum alloy with fine polished and powder coated in black or white.6. Ergonomic comfort to relieve eyes, neck and back strain.Specification:1. Model Number:L802. Product Name: NB Desk Table Clamp LCD Monitor Mount3.Type:LCD Monitor Mount4. Material:Aluminum Alloy+ABS5. Color:Black6. VESA:75 x 75mm/100 x 100mm7. TV size:17-32 inch8. Usage:LCD LED PLASMA TV Monitor BracketLoading 9. Load Capacity:11kgs10. Application:Home Office

Read more less

1. Very easy to install and use, with common hardware pack included in the package.2. With great heavy durable duty steel construction.3. With coating finished paint, easy to clean. Classic black color fit for various occasions.4. Fit for most HDTV flat panel TV, LCD TV, LED TV, Plasma TV, Most HDTV Flat Panel TV, LCD/LED TV. 5. Suitable For family, entertainment, public places and commercial places such as living room, KTV, bars, airports, railway stations, bus stations, shopping malls, stores waiting hall, lounge, large conference rooms, classrooms, lobby and restaurants and etc.Specifications:1. Fits most 55-85 inch flat panel display2. Flat panel tilted mount3. VESA: Universal from 200x200mm to 4.550x420mm5. Tilt: -8 degree /+8 degree6. Distance from tv to wall: 62-133mm7. Material: SPCC with coating finished8. Surface treatment: Powder painting coating finished.9. Color: Black10. Load capacity : 125lbs(56.8kg)

Read more less

1. Interface: HDMI2. Support 4K high-definition large-screen display, with delicate and rich pictures3. Multi-platform compatibility, multi-scenario application4. Small and convenient to carry around5. Support memory card: CF, SD card, MINISD, SDHC, U disk, TF, mmc, XD card6. Output resolution: 1920x10807. Audio playback format: MP3, WMA, WAV, OGG, FLAC, DTS, AAC, AC3, APE8. Support video formats: ASF, AVI, VOB, MPEG, DAT, RM, RMVB, WMV, FLV, MP4, SWF, TP, ISO, TRP, MKV9. Package weight: 0.012 kg10. Size: 5.8x1.2 cm, cord length 35 cm

Read more less

1. Interface: HDMI2. Support 4K high-definition large-screen display, with delicate and rich pictures3. Multi-platform compatibility, multi-scenario application4. Small and convenient to carry around5. Support memory card: CF, SD card, MINISD, SDHC, U disk, TF, mmc, XD card6. Output resolution: 1920x10807. Audio playback format: MP3, WMA, WAV, OGG, FLAC, DTS, AAC, AC3, APE8. Support video formats: ASF, AVI, VOB, MPEG, DAT, RM, RMVB, WMV, FLV, MP4, SWF, TP, ISO, TRP, MKV9. Package weight: 0.012 kg10. Size: 5.8x1.2 cm, cord length 35 cm

Read more less

1. AM8272 dual-core ARM processor 2. Support H.265 decoding, save bandwidth, smoother on the same screen 3. Android /iOS operation free switching program 4. Coexistence of three channels: support direct connection, routing and P2P mode 5. Support video resolution up to 4K UHD 6. Support online upgrade, users do not need to set, automatic upgrade support iOS 13. Specifications 1. Main chip: Dual-core Cortex A7 up to 1.5GHz 2. Resolution: Support 4K 60Hz 3. Support picture format: GIF/JPEG/BMP/TIF/JPG/TIFF 4. Operating system: Support Android OS 4.0/IOS 6.0/Mac or higher 5. Interface: HDMI and Type-C 6. Support audio format: MP1/MP2/MP3/WMA/OGG/ADPCM-WAV/PCM-WAV/AAC 7. No switch: no need to switch between different operating system devices 8. Support video formats: MKV, WMV / VC-1 SP / MP / AP, MPG, MPEG, DAT, AVI, MOV, ISO, MP4, RM, H.265,Real Video 8/9/10, up to 1080P 9. Operating system: Linux 3.0.8 10. Support: Video / Audio / Photo / Office Files / Website 11. Material: ABS+PC 12. Network Band: 2.4/5GHz 13. Power: 5V 2A 14. Size: 72 x 72 x 17mm

Read more less

32-60 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 10 degrees; minus 2 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 80lbs (36.4kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x400mm (horizontal x vertical)32-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)45-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/70 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 200x200mm; 300x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm; 600x400mm (horizontal x vertical)32-52 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/90 degrees4. Weight range: 60lbs (27.3kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)Describe:1. Flexible adjustment of front and rear stretching, easy to remove and plug U disk, video cable and TV cleaning2. Six-arm structure design, stable and safer3. The tilt angle can be adjusted at will, and it is comfortable to use4. With a humanized wire cover design, it can effectively block the installation marks on the wall

Read more less

1. Material: aluminum alloy, cold rolled sheet, ABS2. Weight: 2-9kg3. Suitable for: 13-70 inches4. Tilt angle: plus 85 degrees, minus 30 degrees5. Hole pitch: 75x75mm, 100x100mm6. Free up desktop space and say goodbye to messy cables7. Air pressure hovering and lifting, smooth and unobstructed8. Built-in gas spring, smooth lifting, adjustable force value9. Metal body, high gloss paint10. Support quick installation, two installation methods11. Self-configured USB cable, easy to use peripherals

Read more less

32-60 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 10 degrees; minus 2 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 80lbs (36.4kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x400mm (horizontal x vertical)32-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)45-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/70 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 200x200mm; 300x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm; 600x400mm (horizontal x vertical)32-52 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/90 degrees4. Weight range: 60lbs (27.3kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)Describe:1. Flexible adjustment of front and rear stretching, easy to remove and plug U disk, video cable and TV cleaning2. Six-arm structure design, stable and safer3. The tilt angle can be adjusted at will, and it is comfortable to use4. With a humanized wire cover design, it can effectively block the installation marks on the wall

Read more less

32-60 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 10 degrees; minus 2 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 80lbs (36.4kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x400mm (horizontal x vertical)32-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)45-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/70 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 200x200mm; 300x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm; 600x400mm (horizontal x vertical)32-52 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/90 degrees4. Weight range: 60lbs (27.3kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)Describe:1. Flexible adjustment of front and rear stretching, easy to remove and plug U disk, video cable and TV cleaning2. Six-arm structure design, stable and safer3. The tilt angle can be adjusted at will, and it is comfortable to use4. With a humanized wire cover design, it can effectively block the installation marks on the wall

Read more less

32-60 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 10 degrees; minus 2 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 80lbs (36.4kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x400mm (horizontal x vertical)32-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/80 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)45-70 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/70 degrees4. Weight range: 100lbs (45.5kg)5. Mounting holes: 200x200mm; 300x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm; 600x400mm (horizontal x vertical)32-52 inches:1. Material: SPCC steel plate2. Up and down tilt angle: plus 8 degrees; minus 5 degrees3. Left and right rotation angle: 50 degrees/90 degrees4. Weight range: 60lbs (27.3kg)5. Mounting holes: 100x100mm; 200x100mm; 200x200mm; 300x300mm; 400x200mm; 400x300mm; 400x400mm (horizontal x vertical)Describe:1. Flexible adjustment of front and rear stretching, easy to remove and plug U disk, video cable and TV cleaning2. Six-arm structure design, stable and safer3. The tilt angle can be adjusted at will, and it is comfortable to use4. With a humanized wire cover design, it can effectively block the installation marks on the wall

Read more less

1. Material: aluminum alloy2. Control method: mechanical3. Need to use with TV stand4. Sturdy and durable, not easy to break5. Easy to use, safe and convenient6. Size: about 313-391x286-426 mm (adjustable)7. Weight: about 700 grams8. Note: The gas spring bracket and monitor are display samples, not included, only the bracket accessories are soldFor use with TV monitors that meet the following criteria:1. Monitor height 28.5-42.5 cm2. Weight within 2-6.5kg (without base)3. The thickness of the display is 4-7.5 cm4. The plug-in position is not located in the middle of the back

Read more less

1. Low power consumption chip, low heat generation 2. Built-in 802.11a/b/g/n 300Mbps 5GHz high-speed WiFi and high-sensitivity gain antenna 3. Support DLNA, Airplay, Miracast, Ezcast, Airplay Mirror and other interconnection protocols 4. A powerful tool for small screen (mobile phone screen) to big screen (TV screen) 5. When pushing media, the mobile phone does not occupy the charged traffic, and the mobile phone becomes a remote control 6. Supports multi-threading, and does not affect other functions of the mobile phone when pushing media 7. Support multiple people and multiple mobile phones to connect at the same time, share their wonderful together 8. Hard decoding, support smooth playback of videos and photos taken by all smartphones 9. Compatible with streaming media formats of various protocols, free to enjoy massive Internet video resources 10. Support 720/1080P HD output, enjoy the picture quality 11. Support WPS one-key encryption, quickly connect with router or AP configuration 12. Fashionable and compact design, it is a good companion for home travel 13. AM8252 processor, 128MB RAM

Read more less

1. Support Android, Windows, iOS same screen 2. Support system OTA upgrade 3. Max resolution: 1920x1080P 4. USB: USB2.0 5. WiFi: 2.4G 6. ScreenShare: Miracast, airplay, DLNA 7. Size: 5.6x1.6cm 8. Weight: 100g

Read more less

1. Using the receiver, place the TV anywhere within 50 meters of the source. Simply connect the transmitter to a set-top box, game console or other HDMI output device, then connect the receiver to any HD display 2. HDMI, VGA, 3.5mm jacks can be freely matched and output simultaneously or separately. The transmitted signal is very clear and can easily transmit uncompressed high-definition video and audio. Signal experiences ultra-low latency (real-time) even when streaming 3D video to 1080p devices 3. A true plug-and-play experience up and running within 20 seconds. Connect the transmitter to the HDMI source, then the receiver to the secondary HDTV and youre ready to go. Runs on standard 802.11 5GHz 4. 8 transmitters can be connected to 1 receiver at the same time, one-key switching, no mutual interference, multi-screen sharing. *Note: This operation requires additional purchase of transmitters, 1 receiver can support 8 transmitters (Note: The transmitter cannot be used alone, it must be used in conjunction with the receiver) 5. The resolution can reach 4K, the picture is delicate, and various details can be restored more clearly. Easily send crystal clear uncompressed HD video and digital audio 6. This wireless receiver can be easily connected and does not take up a lot of space, ideal for crowded conference room setups and can be easily shared between different laptops and computers 7. The receiver adopts HDMI+VGA dual port, using WiFi transmission technology, through the point-to-point connection between the transmitter and receiver equipment, the image/video console and set-top box of MAC, notebook, PC, mobile phone, game and set-top box can be connected with HDTV, Projector or monitor synchronization 8. Receiver Resolution: 4k 30Hz 9. Receiver port: HD (V1.4)/Type-c USB/VGA/Audio 10. Receiver power supply: 5V/1-2A Other information: 1. Wireless network: IEEE 802.11ac 2.4GHz/5GHz 2. Resolution: 3840 x 2160P@30fps, 1920 x 1080P@60fps, 1280 x 720P@60fps 3. Support system: Android/Windows/macOS/linux/IOS/PS5/Xbox 4. Plug and Play: No software, no setup, no driver required 5. Supported protocols: for Miracast/DLNA/Airplay 6. Support computer expansion mode 7. Support multi-device connection

Read more less

1.Support input max resolution 3840x2160@30Hz2.Support output max resolution 1920x1080@30Hz3.Support 8/10/12bit deep color4.SupportAWG26 HDMI-compatible standard cable: input up to 15 meters5.Support most acquisition software, such as VLC< OBS . Amcap, etc6.Support Windows and MacOS7.Conform to USB Video and UVC standard8.Conform to USB Audio UAC standard9.Without external power supply, compact and portable10.HDCP Content (Encryption HDMI-compatible Devices) is not allowed for capture

Read more less

1. Material: TPU2. Soft and comfortable to use3. Precise design, accurately fit the remote control4. It can fully protect the equipment from normal scratches, dirt, tears and wear5. Good signal reception

Read more less

1. Material: TPU2. Soft and comfortable to use3. Precise design, accurately fit the remote control4. It can fully protect the equipment from normal scratches, dirt, tears and wear5. Good signal reception

Read more less

1. Band: 2.4GHz ISM, 8 channels are optional 2. Transmission distance: 300 meters 3. Support system: PAL/NTSC 4. Interface: RCA (AV) 5. Transmission method: Wireless 6. Support through wall transmission 7. Digital display channel, convenient and intuitive 8. Shell: aluminum, super cooling effect 9. Support infrared return function 10. Product size: 10x10x2.7cm

Read more less

1. Band: 2.4GHz ISM, 8 channels are optional 2. Transmission distance: 300 meters 3. Support system: PAL/NTSC 4. Interface: RCA (AV) 5. Transmission method: Wireless 6. Support through wall transmission 7. Digital display channel, convenient and intuitive 8. Shell: aluminum, super cooling effect 9. Support infrared return function 10. Product size: 10x10x2.7cm

Read more less

1. Band: 2.4GHz ISM, 8 channels are optional 2. Transmission distance: 300 meters 3. Support system: PAL/NTSC 4. Interface: RCA (AV) 5. Transmission method: Wireless 6. Support through wall transmission 7. Digital display channel, convenient and intuitive 8. Shell: aluminum, super cooling effect 9. Support infrared return function 10. Product size: 10x10x2.7cm

Read more less

1. Using aluminum alloy CNC process, the surface is oxidized with sand surface, high-end environmental protection has good anti-interference and heat dissipation capabilities2. The product conforms to the USB audio and video UVC specification, and supports for Windows/Android/Linux and macOS and other operating systems3. Support most acquisition software, such as VLC, OBS, Amcap, etc4. Input: HDMI/M up to 4K input5. Output: Type C /M supports up to 1080P6. High-definition capture, strong compatibility, a smooth picture without lag, no delay7. No external power supply, small size, ultra-thin and portable8. Length: 2m

Read more less

1. Using aluminum alloy CNC process, the surface is oxidized with sand surface, high-end environmental protection has good anti-interference and heat dissipation capabilities2. The product conforms to the USB audio and video UVC specification, and supports for Windows/Android/Linux and macOS and other operating systems3. Support most acquisition software, such as VLC, OBS, Amcap, etc4. Input: HDMI/M up to 4K input5. Output: Type C /M supports up to 1080P6. High-definition capture, strong compatibility, a smooth picture without lag, no delay7. No external power supply, small size, ultra-thin and portable

Read more less

1. 30m range wireless coverage 2. Zero delay transmission, super anti-interference 3. No compression, full HD 1080P 3D audio and video lossless transmission 4. 60GHz exclusive professional wireless extension technology 5. Pure hardware free drive design, free setup, plug and play 6. Fully compatible with various resolution HDMI input and output devices 7. Easy to stream videos from a display device to a receiver device 8. No software is required, convenient to use through plugging 9. Supports 3D, steady signal, reliable and safe to use 10. Compatible with devices with digital video signal 11. Compact and lightweight design, convenient to carry anywhere you like 12. Ideal for home theater, office, travel, etc. 13. Product size: 8.5x8.5x2cm 14. Packing list: 1 x Transmission kit 1 x Power adapter 1 x Manual

Read more less

1. 30m range wireless coverage 2. Zero delay transmission, super anti-interference 3. No compression, full HD 1080P 3D audio and video lossless transmission 4. 60GHz exclusive professional wireless extension technology 5. Pure hardware free drive design, free setup, plug and play 6. Fully compatible with various resolution HDMI input and output devices 7. Easy to stream videos from a display device to a receiver device 8. No software is required, convenient to use through plugging 9. Supports 3D, steady signal, reliable and safe to use 10. Compatible with devices with digital video signal 11. Compact and lightweight design, convenient to carry anywhere you like 12. Ideal for home theater, office, travel, etc. 13. Product size: 8.5x8.5x2cm 14. Packing list: 1 x Transmission kit 1 x Power adapter 1 x Manual

Read more less

1. 30m range wireless coverage 2. Zero delay transmission, super anti-interference 3. No compression, full HD 1080P 3D audio and video lossless transmission 4. 60GHz exclusive professional wireless extension technology 5. Pure hardware free drive design, free setup, plug and play 6. Fully compatible with various resolution HDMI input and output devices 7. Easy to stream videos from a display device to a receiver device 8. No software is required, convenient to use through plugging 9. Supports 3D, steady signal, reliable and safe to use 10. Compatible with devices with digital video signal 11. Compact and lightweight design, convenient to carry anywhere you like 12. Ideal for home theater, office, travel, etc. 13. Product size: 8.5x8.5x2cm 14. Packing list: 1 x Transmission kit 1 x Power adapter 1 x Manual

Read more less

About The Product1. The wireless HDMI extender extends high-definition video and audio to any HDTV displays up to 330 feet away. It supports up to 4 displays to show one source content synchronously and resolutions up to 1080P.2. The extender transmits the real time video and audio signals with very low latency, allowing user to view the content in other rooms of the house, such as bedroom, living room, or kitchen. It also allows user to control source device from display side via source device’s remote controller. Features1. Digital 2.4G & 5GHz dual frequency wireless A/V transmission2. HDMI 1.4b (6.75Gbps), HDCP 1.4 and DVI compliant3. Full HD 1080P wireless transmission distance of up to 100m under open and interference-free conditions4. Powerful signal transmits through walls, floors, & ceilings5. Supports Point-to-Point and Multicast transmission (up to 4 receivers)6. Extends infrared remote to control source device from display side7. Support output loop back and 3D video transmission8. Simple Plug and Play, no software installation requiredparameter1. Video bandwidth: 7 Gbps2. Video resolution: up to 1080P 60Hz3. HDMI audio format: LPCM 2CH4. Wireless standard: 802.11a/b/g/n5. Modulation method: BPSK/QPSK/16-QAM/64-QAM6. Wireless frequency band: 2.4GHz, 5GHz ISM frequency band7. Operating range: up to 330 feet in open space8. Infrared frequency: 20KHz - 60KHz9. Transmitter:- Input: 1x HDMI Type-A (19-pin female)- Output: 1x HDMI Type-A(19-pin female) 1x USB (Mini USB Type) 1x IR output (3.5mm Stereo Mini-jack)10. Receiver:- Input: 1x USB (USB Type-A) 1x IR input (3.5mm stereo mini jack)- Output: 1x HDMI Type-A (19-pin female)- Dimensions: 100mmx100mmx25mm11. Power supply:- Input: AC100 - 240V 50/60Hz- Output: DC 5V/1A12. Power consumption: 3W (max)13. Working temperature: 32-104 Degree F / 0-40 Degree C14. Storage temperature: -4-140 Degree F / -20-60 Degree C15. Relative humidity: 20-90% RH (no condensation)Package List:- User manual x 1- USB power cable x 2- Power adapter x 2

Read more less

About The Product1. The wireless HDMI extender extends high-definition video and audio to any HDTV displays up to 330 feet away. It supports up to 4 displays to show one source content synchronously and resolutions up to 1080P.2. The extender transmits the real time video and audio signals with very low latency, allowing user to view the content in other rooms of the house, such as bedroom, living room, or kitchen. It also allows user to control source device from display side via source device’s remote controller. Features1. Digital 2.4G & 5GHz dual frequency wireless A/V transmission2. HDMI 1.4b (6.75Gbps), HDCP 1.4 and DVI compliant3. Full HD 1080P wireless transmission distance of up to 100m under open and interference-free conditions4. Powerful signal transmits through walls, floors, & ceilings5. Supports Point-to-Point and Multicast transmission (up to 4 receivers)6. Extends infrared remote to control source device from display side7. Support output loop back and 3D video transmission8. Simple Plug and Play, no software installation requiredparameter1. Video bandwidth: 7 Gbps2. Video resolution: up to 1080P 60Hz3. HDMI audio format: LPCM 2CH4. Wireless standard: 802.11a/b/g/n5. Modulation method: BPSK/QPSK/16-QAM/64-QAM6. Wireless frequency band: 2.4GHz, 5GHz ISM frequency band7. Operating range: up to 330 feet in open space8. Infrared frequency: 20KHz - 60KHz9. Transmitter:- Input: 1x HDMI Type-A (19-pin female)- Output: 1x HDMI Type-A(19-pin female) 1x USB (Mini USB Type) 1x IR output (3.5mm Stereo Mini-jack)10. Receiver:- Input: 1x USB (USB Type-A) 1x IR input (3.5mm stereo mini jack)- Output: 1x HDMI Type-A (19-pin female)- Dimensions: 100mmx100mmx25mm11. Power supply:- Input: AC100 - 240V 50/60Hz- Output: DC 5V/1A12. Power consumption: 3W (max)13. Working temperature: 32-104 Degree F / 0-40 Degree C14. Storage temperature: -4-140 Degree F / -20-60 Degree C15. Relative humidity: 20-90% RH (no condensation)Package List:- User manual x 1- USB power cable x 2- Power adapter x 2

Read more less

About The Product1. The wireless HDMI extender extends high-definition video and audio to any HDTV displays up to 330 feet away. It supports up to 4 displays to show one source content synchronously and resolutions up to 1080P.2. The extender transmits the real time video and audio signals with very low latency, allowing user to view the content in other rooms of the house, such as bedroom, living room, or kitchen. It also allows user to control source device from display side via source device’s remote controller. Features1. Digital 2.4G & 5GHz dual frequency wireless A/V transmission2. HDMI 1.4b (6.75Gbps), HDCP 1.4 and DVI compliant3. Full HD 1080P wireless transmission distance of up to 100m under open and interference-free conditions4. Powerful signal transmits through walls, floors, & ceilings5. Supports Point-to-Point and Multicast transmission (up to 4 receivers)6. Extends infrared remote to control source device from display side7. Support output loop back and 3D video transmission8. Simple Plug and Play, no software installation requiredparameter1. Video bandwidth: 7 Gbps2. Video resolution: up to 1080P 60Hz3. HDMI audio format: LPCM 2CH4. Wireless standard: 802.11a/b/g/n5. Modulation method: BPSK/QPSK/16-QAM/64-QAM6. Wireless frequency band: 2.4GHz, 5GHz ISM frequency band7. Operating range: up to 330 feet in open space8. Infrared frequency: 20KHz - 60KHz9. Transmitter:- Input: 1x HDMI Type-A (19-pin female)- Output: 1x HDMI Type-A(19-pin female) 1x USB (Mini USB Type) 1x IR output (3.5mm Stereo Mini-jack)10. Receiver:- Input: 1x USB (USB Type-A) 1x IR input (3.5mm stereo mini jack)- Output: 1x HDMI Type-A (19-pin female)- Dimensions: 100mmx100mmx25mm11. Power supply:- Input: AC100 - 240V 50/60Hz- Output: DC 5V/1A12. Power consumption: 3W (max)13. Working temperature: 32-104 Degree F / 0-40 Degree C14. Storage temperature: -4-140 Degree F / -20-60 Degree C15. Relative humidity: 20-90% RH (no condensation)Package List:- User manual x 1- USB power cable x 2- Power adapter x 2

Read more less

About The Product1. The wireless HDMI extender extends high-definition video and audio to any HDTV displays up to 330 feet away. It supports up to 4 displays to show one source content synchronously and resolutions up to 1080P.2. The extender transmits the real time video and audio signals with very low latency, allowing user to view the content in other rooms of the house, such as bedroom, living room, or kitchen. It also allows user to control source device from display side via source device’s remote controller. Features1. Digital 2.4G & 5GHz dual frequency wireless A/V transmission2. HDMI 1.4b (6.75Gbps), HDCP 1.4 and DVI compliant3. Full HD 1080P wireless transmission distance of up to 100m under open and interference-free conditions4. Powerful signal transmits through walls, floors, & ceilings5. Supports Point-to-Point and Multicast transmission (up to 4 receivers)6. Extends infrared remote to control source device from display side7. Support output loop back and 3D video transmission8. Simple Plug and Play, no software installation requiredparameter1. Video bandwidth: 7 Gbps2. Video resolution: up to 1080P 60Hz3. HDMI audio format: LPCM 2CH4. Wireless standard: 802.11a/b/g/n5. Modulation method: BPSK/QPSK/16-QAM/64-QAM6. Wireless frequency band: 2.4GHz, 5GHz ISM frequency band7. Operating range: up to 330 feet in open space8. Infrared frequency: 20KHz - 60KHz9. Transmitter:- Input: 1x HDMI Type-A (19-pin female)- Output: 1x HDMI Type-A(19-pin female) 1x USB (Mini USB Type) 1x IR output (3.5mm Stereo Mini-jack)10. Receiver:- Input: 1x USB (USB Type-A) 1x IR input (3.5mm stereo mini jack)- Output: 1x HDMI Type-A (19-pin female)- Dimensions: 100mmx100mmx25mm11. Power supply:- Input: AC100 - 240V 50/60Hz- Output: DC 5V/1A12. Power consumption: 3W (max)13. Working temperature: 32-104 Degree F / 0-40 Degree C14. Storage temperature: -4-140 Degree F / -20-60 Degree C15. Relative humidity: 20-90% RH (no condensation)Package List:- User manual x 1- USB power cable x 2- Power adapter x 2

Read more less

Features:1. IRF series transmitter tubes, durable2. Can be used to connect the antenna (instrument base)3. Aluminum laser case marking, all aluminum buttons, translucent silicone keys4. The original qck circuit is greatly simplified, the installation components are reduced, and the complex transformer windings and wiring procedures are not needed, and the construction is easy (green and red)5. 8-band, digital display, external power supply 13.8 v 10W, built-in 12.6 V batteryFeatures list:1. Simple, interesting and versatile cxp ssb high frequency transceiver with built-in dsp and sdr functions2. Eer class e drives the ssb launch phase3. 13.8v power supply about 10w ssb pep output4. Filters: 4000,2500,1700,500,200,100,50hz passband5. Dsp functions: automatic gain control (agc) , noise reduction (nr) , voice trigger, voice trigger XMIT, attenuator rx (att) , tx noise gate, tx drive control, volume control, dbm/s-meter6. Ssb reverse sideband/carrier suppression transmission: better than -45 dbc, imd3(double tone) -33 dbc, receive: better than -50 dbc7. Multi-band support, continuously adjustable in the 160m-10m frequency range (loss of 20khz performance)99mhz8. Open source firmware, built into IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines of code9. V-based software can be used for fast and complete rogue operations (qsk and semi-qsk) , or to assist execution in digital mode (without cat or ptt interface) for rx/tx switches with tx/pa delay control, external ptt output-simple installation and modification, 8 component changes and 8 lines10. Lightweight, low-cost Transceiver: eer electronic level transmitter, which has high power efficiency (without the need for a large radiator) and simple design (without the need for complex balanced linear power amplifier)11. SSB transmitter phase is completely digital and software-based: controls the phase of the SI5351 PLL (via small I2C frequency changes over 800 kbit/s) and the amplitude of the PA (via pwm to pwm) to test the microphone input and reconstruct the SSB signal. Key shaping circuit PA)12. All-digital and software-based SDR receiver level (optional) : sampling of I/Q signals (plural) from a digital mixer with an orthogonal sampling detector, and in which the implementation of the 90-degree phase shift (Hilber transform) software and by adding remove sideband13. Three switchable analog governors independent of the front-end receiver14. MDS receiver noise level: -135 dbm (200 hz bw) at 28 mhz15. Pre-receiver selectivity: steep frequency adjustment -45 db/10 rollover16. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db17. CW decoder, corresponding relays with filters switched via i2c-Cat support (TS480 subset) , you can stream audio, keystrokes, and display text through CATPort description:1. Charging: built-in lithium battery charging port, only use the attached charger! Do not use other chargers!2. Switch: off, bat: built-in Battery Power, 13.8: external power supply3. DC13.8V/3A: external power interface4. Key: automatic Key body connection (a, b, single Key)5. Pa: external power amplifier, ptt signal6. Mic: external microphone interface7. Uart: serial communication (TS-480 compatible instruction)8. Spk: external speakerProduct specifications:1. Battery capacity: 6000 mah2. Side PTT with built-in Mic for handheld use3. Using power MOS transistor, not easy to break4. Built-in battery, built-in microphone, speakers, can be connected to automatic keys, but also CW decoding5. Size: 13.3 x 7.5 x 4cmPacking list:-.1 x host-.1 x hand Mi-.1 x power (host + hand does not come with)-.1 x three-in-one screwdriver

Read more less

Features:1. IRF series transmitter tubes, durable2. Can be used to connect the antenna (instrument base)3. Aluminum laser case marking, all aluminum buttons, translucent silicone keys4. The original qck circuit is greatly simplified, the installation components are reduced, and the complex transformer windings and wiring procedures are not needed, and the construction is easy (green and red)5. 8-band, digital display, external power supply 13.8 v 10W, built-in 12.6 V batteryFeatures list:1. Simple, interesting and versatile cxp ssb high frequency transceiver with built-in dsp and sdr functions2. Eer class e drives the ssb launch phase3. 13.8v power supply about 10w ssb pep output4. Filters: 4000,2500,1700,500,200,100,50hz passband5. Dsp functions: automatic gain control (agc) , noise reduction (nr) , voice trigger, voice trigger XMIT, attenuator rx (att) , tx noise gate, tx drive control, volume control, dbm/s-meter6. Ssb reverse sideband/carrier suppression transmission: better than -45 dbc, imd3(double tone) -33 dbc, receive: better than -50 dbc7. Multi-band support, continuously adjustable in the 160m-10m frequency range (loss of 20khz performance)99mhz8. Open source firmware, built into IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines of code9. V-based software can be used for fast and complete rogue operations (qsk and semi-qsk) , or to assist execution in digital mode (without cat or ptt interface) for rx/tx switches with tx/pa delay control, external ptt output-simple installation and modification, 8 component changes and 8 lines10. Lightweight, low-cost Transceiver: eer electronic level transmitter, which has high power efficiency (without the need for a large radiator) and simple design (without the need for complex balanced linear power amplifier)11. SSB transmitter phase is completely digital and software-based: controls the phase of the SI5351 PLL (via small I2C frequency changes over 800 kbit/s) and the amplitude of the PA (via pwm to pwm) to test the microphone input and reconstruct the SSB signal. Key shaping circuit PA)12. All-digital and software-based SDR receiver level (optional) : sampling of I/Q signals (plural) from a digital mixer with an orthogonal sampling detector, and in which the implementation of the 90-degree phase shift (Hilber transform) software and by adding remove sideband13. Three switchable analog governors independent of the front-end receiver14. MDS receiver noise level: -135 dbm (200 hz bw) at 28 mhz15. Pre-receiver selectivity: steep frequency adjustment -45 db/10 rollover16. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db17. CW decoder, corresponding relays with filters switched via i2c-Cat support (TS480 subset) , you can stream audio, keystrokes, and display text through CATPort description:1. Charging: built-in lithium battery charging port, only use the attached charger! Do not use other chargers!2. Switch: off, bat: built-in Battery Power, 13.8: external power supply3. DC13.8V/3A: external power interface4. Key: automatic Key body connection (a, b, single Key)5. Pa: external power amplifier, ptt signal6. Mic: external microphone interface7. Uart: serial communication (TS-480 compatible instruction)8. Spk: external speakerProduct specifications:1. Battery capacity: 6000 mah2. Side PTT with built-in Mic for handheld use3. Using power MOS transistor, not easy to break4. Built-in battery, built-in microphone, speakers, can be connected to automatic keys, but also CW decoding5. Size: 13.3 x 7.5 x 4cmPacking list:-.1 x host-.1 x hand Mi-.1 x power (host + hand does not come with)-.1 x three-in-one screwdriver

Read more less

Features:1. IRF series transmitter tubes, durable2. Can be used to connect the antenna (instrument base)3. Aluminum laser case marking, all aluminum buttons, translucent silicone keys4. The original qck circuit is greatly simplified, the installation components are reduced, and the complex transformer windings and wiring procedures are not needed, and the construction is easy (green and red)5. 8-band, digital display, external power supply 13.8 v 10W, built-in 12.6 V batteryFeatures list:1. Simple, interesting and versatile cxp ssb high frequency transceiver with built-in dsp and sdr functions2. Eer class e drives the ssb launch phase3. 13.8v power supply about 10w ssb pep output4. Filters: 4000,2500,1700,500,200,100,50hz passband5. Dsp functions: automatic gain control (agc) , noise reduction (nr) , voice trigger, voice trigger XMIT, attenuator rx (att) , tx noise gate, tx drive control, volume control, dbm/s-meter6. Ssb reverse sideband/carrier suppression transmission: better than -45 dbc, imd3(double tone) -33 dbc, receive: better than -50 dbc7. Multi-band support, continuously adjustable in the 160m-10m frequency range (loss of 20khz performance)99mhz8. Open source firmware, built into IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines of code9. V-based software can be used for fast and complete rogue operations (qsk and semi-qsk) , or to assist execution in digital mode (without cat or ptt interface) for rx/tx switches with tx/pa delay control, external ptt output-simple installation and modification, 8 component changes and 8 lines10. Lightweight, low-cost Transceiver: eer electronic level transmitter, which has high power efficiency (without the need for a large radiator) and simple design (without the need for complex balanced linear power amplifier)11. SSB transmitter phase is completely digital and software-based: controls the phase of the SI5351 PLL (via small I2C frequency changes over 800 kbit/s) and the amplitude of the PA (via pwm to pwm) to test the microphone input and reconstruct the SSB signal. Key shaping circuit PA)12. All-digital and software-based SDR receiver level (optional) : sampling of I/Q signals (plural) from a digital mixer with an orthogonal sampling detector, and in which the implementation of the 90-degree phase shift (Hilber transform) software and by adding remove sideband13. Three switchable analog governors independent of the front-end receiver14. MDS receiver noise level: -135 dbm (200 hz bw) at 28 mhz15. Pre-receiver selectivity: steep frequency adjustment -45 db/10 rollover16. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db17. CW decoder, corresponding relays with filters switched via i2c-Cat support (TS480 subset) , you can stream audio, keystrokes, and display text through CATPort description:1. Charging: built-in lithium battery charging port, only use the attached charger! Do not use other chargers!2. Switch: off, bat: built-in Battery Power, 13.8: external power supply3. DC13.8V/3A: external power interface4. Key: automatic Key body connection (a, b, single Key)5. Pa: external power amplifier, ptt signal6. Mic: external microphone interface7. Uart: serial communication (TS-480 compatible instruction)8. Spk: external speakerProduct specifications:1. Battery capacity: 6000 mah2. Side PTT with built-in Mic for handheld use3. Using power MOS transistor, not easy to break4. Built-in battery, built-in microphone, speakers, can be connected to automatic keys, but also CW decoding5. Size: 13.3 x 7.5 x 4cmPacking list:-.1 x host-.1 x hand Mi-.1 x power (host + hand does not come with)-.1 x three-in-one screwdriver

Read more less

1. Processor: AM82722. Memory: 1GB3. audio playback formats: MP3/WMA/WAV/OGG/FLAC/DTS/AAC/AC3/APE4. Support video formats.ASF/AVI/VOB/MPEG/DAT/RM/RMVB/WMV/FLV/MP4/SWF/TP/ISO/TRP/MKV5. Interface: HDMIFeatures:1. Wireless connection, cast screen / the same screen2. Mobile phone screen cast to the large screen, the phone can switch to other interfaces, do not affect each other3. Large screen screen and cell phone synchronization, wide field of view, the game is more enjoyable4. Switch freely between horizontal and vertical screens, suitable for multiple scenes5. In projection mode, the phone can be placed off the screen6. 4K HD resolution, fine picture quality

Read more less

1. Processor: AM82722. Memory: 1GB3. audio playback formats: MP3/WMA/WAV/OGG/FLAC/DTS/AAC/AC3/APE4. Support video formats.ASF/AVI/VOB/MPEG/DAT/RM/RMVB/WMV/FLV/MP4/SWF/TP/ISO/TRP/MKV5. Interface: HDMIFeatures:1. Wireless connection, cast screen / the same screen2. Mobile phone screen cast to the large screen, the phone can switch to other interfaces, do not affect each other3. Large screen screen and cell phone synchronization, wide field of view, the game is more enjoyable4. Switch freely between horizontal and vertical screens, suitable for multiple scenes5. In projection mode, the phone can be placed off the screen6. 4K HD resolution, fine picture quality

Read more less

1. Processor: AM82722. Memory: 1GB3. audio playback formats: MP3/WMA/WAV/OGG/FLAC/DTS/AAC/AC3/APE4. Support video formats.ASF/AVI/VOB/MPEG/DAT/RM/RMVB/WMV/FLV/MP4/SWF/TP/ISO/TRP/MKV5. Interface: HDMIFeatures:1. Wireless connection, cast screen / the same screen2. Mobile phone screen cast to the large screen, the phone can switch to other interfaces, do not affect each other3. Large screen screen and cell phone synchronization, wide field of view, the game is more enjoyable4. Switch freely between horizontal and vertical screens, suitable for multiple scenes5. In projection mode, the phone can be placed off the screen6. 4K HD resolution, fine picture quality

Read more less

Function:1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience3. Upgrade the built-in speakers to double the sound4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template5. Change the QRP CW frequency quickly6. Support CW side volume adjustment7. Support CW side tones8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (with batteries and no batteries optional, built-in 4000MAH lithium battery)1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decodingFeatures:1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading4. High launch efficiency7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm8. Ultra-small size: 88x39x124mm (without bulge)9. Rich interfaces (cat, ptt out, mic/key, k-head mic)10. All LPF components use 100v c0g/np0 capacitors11. Using op-amp chips are lower than those of lm4562 noise12. A built-in speaker with a cavity13. BNC antenna interfaceExplanation:1. Support full mode: usb、lsb、cw、am、fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good)2. Filter DSP filter: 4000,2500,1700,500,200,100,50 Hz passband3. Function DSP function: automatic gain control (AGC) , noise reduction (NR) , XMIT Voice Trigger (Vox) , RX attenuator (Att) , TX Noise Gate, TX unit control, volume control, DBM/S instrument4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance)6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required)8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit)9. Software-based all-digital SDR receiver level (optional) : sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw)12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db14. CW decoder, direct/iambic-a/B keying15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol)Package includes:- 1 x transceiver- 1 x the microphone- 1 x charger- 4 x machine floor Mats

Read more less

Function:1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience3. Upgrade the built-in speakers to double the sound4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template5. Change the QRP CW frequency quickly6. Support CW side volume adjustment7. Support CW side tones8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (with batteries and no batteries optional, built-in 4000MAH lithium battery)1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decodingFeatures:1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading4. High launch efficiency7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm8. Ultra-small size: 88x39x124mm (without bulge)9. Rich interfaces (cat, ptt out, mic/key, k-head mic)10. All LPF components use 100v c0g/np0 capacitors11. Using op-amp chips are lower than those of lm4562 noise12. A built-in speaker with a cavity13. BNC antenna interfaceExplanation:1. Support full mode: usb、lsb、cw、am、fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good)2. Filter DSP filter: 4000,2500,1700,500,200,100,50 Hz passband3. Function DSP function: automatic gain control (AGC) , noise reduction (NR) , XMIT Voice Trigger (Vox) , RX attenuator (Att) , TX Noise Gate, TX unit control, volume control, DBM/S instrument4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance)6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required)8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit)9. Software-based all-digital SDR receiver level (optional) : sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw)12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db14. CW decoder, direct/iambic-a/B keying15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol)Package includes:- 1 x transceiver- 1 x the microphone- 1 x charger- 4 x machine floor Mats

Read more less

Function:1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience3. Upgrade the built-in speakers to double the sound4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template5. Change the QRP CW frequency quickly6. Support CW side volume adjustment7. Support CW side tones8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (with batteries and no batteries optional, built-in 4000MAH lithium battery)1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decodingFeatures:1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading4. High launch efficiency7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm8. Ultra-small size: 88x39x124mm (without bulge)9. Rich interfaces (cat, ptt out, mic/key, k-head mic)10. All LPF components use 100v c0g/np0 capacitors11. Using op-amp chips are lower than those of lm4562 noise12. A built-in speaker with a cavity13. BNC antenna interfaceExplanation:1. Support full mode: usb、lsb、cw、am、fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good)2. Filter DSP filter: 4000,2500,1700,500,200,100,50 Hz passband3. Function DSP function: automatic gain control (AGC) , noise reduction (NR) , XMIT Voice Trigger (Vox) , RX attenuator (Att) , TX Noise Gate, TX unit control, volume control, DBM/S instrument4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance)6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required)8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit)9. Software-based all-digital SDR receiver level (optional) : sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw)12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db14. CW decoder, direct/iambic-a/B keying15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol)Package includes:- 1 x transceiver- 1 x the microphone- 1 x charger- 4 x machine floor Mats

Read more less