20A 12V 24V Lithium Lead Acid Solar Charge Controller PWM PV Controller With LCD Display


-Supports battery type (factory setting defaults to B2):
-B1=Lead-acid battery 12V/24V (automatic recognition)
-B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
-B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)

-Safe use recommendations:
1. This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
3. When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type
4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface

-Technical parameters:
1. System voltage: 12V/24V auto adaptive
2. Rated charging current: 10A, 20A, 30A
3. Rated discharge current: 10A
4. Maximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery
5. Charging cut-off voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)
6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10V(B3)
7. Discharge recovery voltage: 12.6V(B1), 10.5V(B2), 12V(B3)
8. Light-controlled light on threshold: PV panel 8V (light-controlled light on with a delay)
9. Light control off threshold: PV panel 8V (light control off with a delay)
10. USB output: 2-channel USB output, 5V/1A (maximum)
11. Standby current: less than 10mA
12. Operating temperature: -35- 60 degrees Celsius
13. Weight: about 165g
14. Size: about 13.2 x 7.5 x 3cm
15. Warm tips: the battery voltage displayed on the screen will have a small error, please prevail in practice

-Features:
1. LCD display, use the LCD display settings, display timing settings corresponding to the LCD display is clear and intuitive, one-key operation can be completed
2. Alloy heat dissipation back plate, thickened heat dissipation back plate, improve heat dissipation performance, MOS tube close to the heat dissipation plate design, can be in the ambient temperature of 60 degrees Celsius normal operation
3. Working mode setting, touch the adjustment button, complete all settings with one key
4. Dual USB charging ports, support most of the USB interface devices on the market, such as cell phones, tablet PCs and PSP consoles
5. ABS engineering plastics shell, with high strength impact resistance, high ignition point, anti-aging, corrosion resistance and other characteristics, effective service life and safety
6. It is a new type of solar controller, can fully meet the requirements of your home photovoltaic system (including home lighting system)


Specification:
Package Weight
One Package Weight 0.18kgs / 0.41lb
One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch
Qty per Carton 120
Carton Weight 20.90kgs / 46.08lb
Carton Size 50cm * 42cm * 30cm / 19.69inch * 16.54inch * 11.81inch
Loading Container 20GP: 423 cartons * 120 pcs = 50760 pcs
40HQ: 982 cartons * 120 pcs = 117840 pcs

20A 12V 24V Lithium Lead Acid Solar Charge Controller PWM PV Controller With LCD Display

Product form

SKU: TBD0605909602

  • In stock (Processing Time 1 - 72 hours)

€11,67

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    -Supports battery type (factory setting defaults to B2):
    -B1=Lead-acid battery 12V/24V (automatic recognition)
    -B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
    -B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)

    -Safe use recommendations:
    1. This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
    2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
    3. When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type
    4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
    5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface

    -Technical parameters:
    1. System voltage: 12V/24V auto adaptive
    2. Rated charging current: 10A, 20A, 30A
    3. Rated discharge current: 10A
    4. Maximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery
    5. Charging cut-off voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)
    6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10V(B3)
    7. Discharge recovery voltage: 12.6V(B1), 10.5V(B2), 12V(B3)
    8. Light-controlled light on threshold: PV panel 8V (light-controlled light on with a delay)
    9. Light control off threshold: PV panel 8V (light control off with a delay)
    10. USB output: 2-channel USB output, 5V/1A (maximum)
    11. Standby current: less than 10mA
    12. Operating temperature: -35- 60 degrees Celsius
    13. Weight: about 165g
    14. Size: about 13.2 x 7.5 x 3cm
    15. Warm tips: the battery voltage displayed on the screen will have a small error, please prevail in practice

    -Features:
    1. LCD display, use the LCD display settings, display timing settings corresponding to the LCD display is clear and intuitive, one-key operation can be completed
    2. Alloy heat dissipation back plate, thickened heat dissipation back plate, improve heat dissipation performance, MOS tube close to the heat dissipation plate design, can be in the ambient temperature of 60 degrees Celsius normal operation
    3. Working mode setting, touch the adjustment button, complete all settings with one key
    4. Dual USB charging ports, support most of the USB interface devices on the market, such as cell phones, tablet PCs and PSP consoles
    5. ABS engineering plastics shell, with high strength impact resistance, high ignition point, anti-aging, corrosion resistance and other characteristics, effective service life and safety
    6. It is a new type of solar controller, can fully meet the requirements of your home photovoltaic system (including home lighting system)


    Specification:
    Package Weight
    One Package Weight 0.18kgs / 0.41lb
    One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch
    Qty per Carton 120
    Carton Weight 20.90kgs / 46.08lb
    Carton Size 50cm * 42cm * 30cm / 19.69inch * 16.54inch * 11.81inch
    Loading Container 20GP: 423 cartons * 120 pcs = 50760 pcs
    40HQ: 982 cartons * 120 pcs = 117840 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account