Dual M.2 NVME SSD RAID Array Mobile Hard Drive Enclosure Type-C USB3.2 GEN2x2 20G 586R(Dark Gray)


1. Support capacity: 4TB
2. Transfer interface: USB2.0, USB3.0, USB3.1, USB3.2, USB4
3. Transmission speed: 20Gbps
4. Master control: JMS586R
5. Power interface: Type-C
6. Suitable for multiple SSD specifications: M.2 NVME 2230 2242 2260 2280
7. P1/P2 SSD indicator: green light on when SSD recognition is normal, green light blinks when reading and writing data, red light blinks when SSD is faulty
8. Size: about 10.6 x 5.7 x 1.7cm
9. Weight: about 168.8g

Features:
1. Mobile storage, convenient, Type-C data interface, compatible with computers, tablets, cell phones
2. Quiet cooling fan, accelerate the hard disk cooling, make the operation more stable
3. Misdialing, mistakenly touching RAID mode and RESET will not change the array, press and hold the RESET button and then turn on the power to change the array
4. RAID1 mode switch to PM mode, split into two independent disks, one of the disks in the offline state, enter the disk manager to offline disk online, RAID1 mode data still exists in the two disks
5. 5 minutes, no data read and write, the device enters the automatic sleep state, reduce power consumption, protect the life of the hard disk
6. Replacement of SSD specifications can be installed directly, without opening the board, convenient and fast

RAID mode setup steps:
1. Install the SSD, plug in the data and power cables, and then turn off the power
2. Set the RAID mode to the desired position
3. Press and hold the reset button, then turn on the power switch and release the reset button after 3s of beeping
4. After the RAID setup is complete, you need to enter disk manager for initialization
5. Note: data will be lost when switching RAID modes, so please be careful
6. Suggestion: backup your data before switching RAID mode

Installation steps:
1. Open the bottom cover
2. Insert the SSD into the M.2 NVME connector at an angle of 45 degrees
3. Attach the removable studs to the end of the SSD.
4. Use a screwdriver to lock the studs onto the board
5. Close the bottom cover and lock the screws.

Packing list:
- HDD case x 1
- Type-C cable x 1
- Screwdriver x 1
- Moving studs x 2
- Housing screws x 2


Specification:
Package Weight
One Package Weight 0.20kgs / 0.45lb
One Package Size 17cm * 12cm * 5cm / 6.69inch * 4.72inch * 1.97inch
Qty per Carton 100
Carton Weight 21.00kgs / 46.30lb
Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch
Loading Container 20GP: 490 cartons * 100 pcs = 49000 pcs
40HQ: 1137 cartons * 100 pcs = 113700 pcs

Dual M.2 NVME SSD RAID Array Mobile Hard Drive Enclosure Type-C USB3.2 GEN2x2 20G 586R(Dark Gray)

Product form

SKU: TBD0605244001A

  • In stock (Processing Time 1 - 72 hours)

€109,15

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Support capacity: 4TB
    2. Transfer interface: USB2.0, USB3.0, USB3.1, USB3.2, USB4
    3. Transmission speed: 20Gbps
    4. Master control: JMS586R
    5. Power interface: Type-C
    6. Suitable for multiple SSD specifications: M.2 NVME 2230 2242 2260 2280
    7. P1/P2 SSD indicator: green light on when SSD recognition is normal, green light blinks when reading and writing data, red light blinks when SSD is faulty
    8. Size: about 10.6 x 5.7 x 1.7cm
    9. Weight: about 168.8g

    Features:
    1. Mobile storage, convenient, Type-C data interface, compatible with computers, tablets, cell phones
    2. Quiet cooling fan, accelerate the hard disk cooling, make the operation more stable
    3. Misdialing, mistakenly touching RAID mode and RESET will not change the array, press and hold the RESET button and then turn on the power to change the array
    4. RAID1 mode switch to PM mode, split into two independent disks, one of the disks in the offline state, enter the disk manager to offline disk online, RAID1 mode data still exists in the two disks
    5. 5 minutes, no data read and write, the device enters the automatic sleep state, reduce power consumption, protect the life of the hard disk
    6. Replacement of SSD specifications can be installed directly, without opening the board, convenient and fast

    RAID mode setup steps:
    1. Install the SSD, plug in the data and power cables, and then turn off the power
    2. Set the RAID mode to the desired position
    3. Press and hold the reset button, then turn on the power switch and release the reset button after 3s of beeping
    4. After the RAID setup is complete, you need to enter disk manager for initialization
    5. Note: data will be lost when switching RAID modes, so please be careful
    6. Suggestion: backup your data before switching RAID mode

    Installation steps:
    1. Open the bottom cover
    2. Insert the SSD into the M.2 NVME connector at an angle of 45 degrees
    3. Attach the removable studs to the end of the SSD.
    4. Use a screwdriver to lock the studs onto the board
    5. Close the bottom cover and lock the screws.

    Packing list:
    - HDD case x 1
    - Type-C cable x 1
    - Screwdriver x 1
    - Moving studs x 2
    - Housing screws x 2


    Specification:
    Package Weight
    One Package Weight 0.20kgs / 0.45lb
    One Package Size 17cm * 12cm * 5cm / 6.69inch * 4.72inch * 1.97inch
    Qty per Carton 100
    Carton Weight 21.00kgs / 46.30lb
    Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch
    Loading Container 20GP: 490 cartons * 100 pcs = 49000 pcs
    40HQ: 1137 cartons * 100 pcs = 113700 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account