3D Printer Machines

1. This is a dual extruder which can be used on 3D printers like Mendel, Prusa, Makerbot, and Printrboard and others. 2. The two print heads are conjoined with a piece of high hardness aluminum bar with good heat dispersion and high reliability. 3. The main benefits of this dual extruder includes being able to print more complex objects with support structures and more aesthetically pleasing objects that feature multiple colors or multiple materials. 4. Material of Print: 1.75mm or 3mm PLA / ABS materials.

Read more less

1. High hardness aluminum alloy material, sturdy and durable2. Closely fit the timing belt, the stretching effect is better3. Turn the big knob to adjust at will4. Fine production, no burr, strong compatibility, wear-resistant and durable5. Material: aluminum alloy + stainless steel6. Surface treatment: anodizing7. Purpose: used to adjust the tightness of the Y-axis belt of the 3D printer and improve the positioning8. Applicable models: suitable for Ender 3 series9. Size: about 9.3 x 7x 1.25cm10. Weight: about 68 grams

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

1. Weight: 0.056kg2. Product name: Anet ET4 24V hot-end kit3. Adapted consumables: 1.75mm consumables4. Material: aluminum + stainless steel + brass5. Nozzle diameter: 0.4mm6. Voltage: 24v7. Features: rapid heating, high-quality material selection, quality assurance, and convenient installation

Read more less

1. The product can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer. 2. 3D Touch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. 3. The main functions and controls of 3D Touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch, thus, 3D Touch can be used on almost every 3D printer control board. 4. If you choose 3D Touch, your 3D printer will be high-class masterpiece, giving you an enjoyable experience.

Read more less

1. Material: Aluminum & Stainless Steel & Brass. 2. Connection method: external thread connection. 3. Scope of application: 3D printer. 4. Operating temperature range: -40 degree to +300 degree. 5. Cartridge Heater: 12V 40W.

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1) Material: PLA Transparent which is stronger toughness, better liquidity 2) Working temperature: 1.75mm at 210 degree 3) It is smokeless, smell like baked corn 4) Diameter tolerance: + / - 0.1mm 5) Roundness: + / - 0.03mm 6) Moisture absorption: average 7) Surface glossiness: good 8) Toughness: good, unbroken when bending 9) Weight: 1.0kg

Read more less

About the product1. 3D printer material 1.75mm ABS filaments 2. High density, good toughness, ABS material is good for printing larger model 3. Perfect design can fit for different temperature environment 4. Can be used for most kinds of 3D printers 5. Different colors of ABS filaments for you to print colorful objects 6. Eco-friendly ABS, non-toxic tasteless when printing 7. Made of original new material, more stable 8. No bubbles

Read more less

1. The hot bed high-power expansion module has a compact appearance and stronger heat dissipation, which can solve the problem of excessive heating bed power and current load.2. Under normal heat dissipation, this module can work stably for a long time when the measured I (Max) is equal to 30A. During use, the current should not exceed 30A.3. When using a hot bed with a power greater than 150W, please connect an external high-power module4. Easy to use5. Delivery list: high-power module, motherboard PWM 20CM signal control line, high-power module 30cm power supply wiring (2 red and black)

Read more less

1. Rated voltage: 12V2. Feeder: long-distance feeder3. 2 in 2 out-dual extrusion system4. Heating wire: 12V, 40W, length 1 meter5. Heating block: 16 x 16 x 12mm6. Cooling fan: 30 x 30 x 10mm, with bracket

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. 3D printer J head hot end is suitable for 1.75mm and 3.0mm filament Wade or Bowden extruder2. Have better heat dissipation and stability3. Lighter weight, reducing the length of the hot end, making the feeding tube deeper into the hot end4. Simple and applicable, heating tube, thermistor and aluminum block contact more fully, so that the temperature control is more accurate5. 1.75mm consumables are delivered with 2 x 4 tubes, 3mm consumables are delivered with 3 x 4 tubes

Read more less

1. Material: stainless steel2. Can clamp 7mm thick glass3. High pressure resistance, no tripping, durable4. Suitable for: 3D printer lattice glass5. Dimensions: total length 30.1mm, aperture 3.1mm6. Unit weight: 1.4g

Read more less

1. Input voltage and current: 5V, 2A2. Adapter parameters: 100-240V, 50-60Hz3. Applicable consumables: 1.75mm ABS or PLA4. Fixed temperature: 210 degrees Celsius5. Temperature adjustment: non-adjustable6. Speed adjustment: three speeds selectable7. Nozzle material: ceramic8. Nozzle diameter: 0.7mm9. ABS shell, wear and tear resistant, no colour loss10. Curved body design, suitable for ages 5 years and above11. 6 heat dissipation holes in the nib to increase usage time12. One piece moulding, good heat dissipation, long life13. High quality thickened steel piece, impact resistant, more stable operation14. Surface polishing technology, reduce friction and more silent15. Dimensions: 185x29x43mm16. Weight: 0.056 kgSteps to use.Step 1: Connect the power supply (the pen enters preheat when the power light is on)Step 2: Wait for the power light to turn green when the print pen is ready for normal use, the warm up time is about 15 secondsStep 3: Prepare the consumables for cutting, click the feed button, put the consumables in when the motor turns, wait for about 5 seconds for the pen to dispense normallyAccessories.- 3D pen x 1- 3 colours x 10m PLA- USB charging cable x 1- Stencil paper x 3- Instruction booklet x 1- Pen holder x 1

Read more less

1. GRBL 0.8 c compatible (open source firmware running on UNO that can convert g-code commands to step signals)2. 4-axis support (X, Y, Z, a - can copy X, Y, Z or make a complete 4-axis custom firmware using pins D12 and D13)3. Adopt removable Pololu A4988 compatible stepper driver. (A4988, DRV8825 and others)4. Jumper to set microstepping for stepper driver. (Some drivers, like the DRV8825, can do 1/32 microsteps)5. The stepper motor can be connected with a 4-pin Molex connector or soldered in place6. Operates on 12-36V DC. (Currently only the Pololu DRV8825 driver can handle voltages up to 36V, so please consider the operating voltage when powering the board.)7. Size: 26.5x8.5x6.5cm8. Weight: 1350gpacking list:-.CNC Shield V3.0 x 1-.UNOR3 board x 1-.USB cable x 1-.A4988 driver red x 4-.17HS4401S stepper motor x 4

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Finely made, no burrs, comfortable and smooth to the touch2. With screws and nuts, easy to install3. Material: aluminum4. Applicable bandwidth: about 6mm5. Size: about 8.5 x 2.8cm6. Weight: about 58 grams

Read more less

1. Extrude consumables, pull back more accurately2. Increase the pulley to reduce wear and improve stability3. Compatible with more consumables, such as flexible consumables TPU, it is more convenient to change materials4. All-metal structure, easy to replace, and increased heat dissipation holes5. You can switch between short-range and long-range extrusion at any time, which is convenient for disassembly and assembly, and does not affect the function of the original printer6. Material: aluminum alloy7. Applicable models: suitable for Ender 3/Cr108. Description: the motor is not included in the shipment

Read more less

1. Adopt large screen 12864LCD2. The SD card holder is integrated on the back. after the sliced file is placed in the SD card, select the corresponding file on the LCD to print3. Built-in encoder, can realize parameter adjustment, and file selection and printing4. Plug and play on ramps, but need to modify firmware to support5. Packing list: motherboard x 1, L-shaped adapter board x 1, FC cable x 26. Description: SD card (not included) can be inserted for offline printing7. Number of rows and columns: 128 x 64 dots8. Dot size: 0.48 x 0.48mm9. Dot distance: 0.52 x 0.52mm10. Field of view: 73 x 39mm11. Size: about 9.3 x 7x 1.25cm12. Weight: about 160 grams

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Material: aluminum + 304 stainless steel2. Surface process: anodizing3. Function: used to retrofit E3D V6 hot end for ENDER3 series 3D printers4. Compatible models: suitable for ENDER 3/3S/PRO/2/5/6, CR10/10S/PRO5. Features: all metal material, durable, not easy to rust, easy to install and use6. Dimensions: about 4.3 x 3 x 1.79 cm7. Weight: about 80g

Read more less

1. Extrude consumables, pull back more accurately2. Increase the pulley to reduce wear and improve stability3. Compatible with more consumables, such as flexible consumables TPU, it is more convenient to change materials4. All-metal structure, easy to replace, and increased heat dissipation holes5. You can switch between short-range and long-range extrusion at any time, which is convenient for disassembly and assembly, and does not affect the function of the original printer6. Material: aluminum alloy7. Applicable models: suitable for Ender 3/Cr108. Description: the motor is not included in the shipment

Read more less

1. Extrude consumables, pull back more accurately2. Increase the pulley to reduce wear and improve stability3. Compatible with more consumables, such as flexible consumables TPU, it is more convenient to change materials4. All-metal structure, easy to replace, and increased heat dissipation holes5. You can switch between short-range and long-range extrusion at any time, which is convenient for disassembly and assembly, and does not affect the function of the original printer6. Material: aluminum alloy7. Applicable models: suitable for Ender 3/Cr108. Description: the motor is not included in the shipment

Read more less

1. The motor wire is made of pure copper enameled wire, the copper wire is evenly arranged, and it is not easy to be deformed during long-term transportation2. Enhanced steel shell, durable3. Energy saving and quiet, smooth operation4. High torque, high speed response, low vibration, convenient speed regulation5. Current: 1.33A6. Torque: 0.3N.m7. Height: about 34mm8. Shaft diameter: about 5mm9. Shaft height: about 23mm10. Weight: about 220 grams

Read more less

1. Integrate MEGA 2560 and ramps1.4 into one, which solves the problem that the combination interface of Ramps1.4 is cumbersome and prone to failure2. The circuit board adopts a 4-layer board, and has been specially optimized for heat dissipation3. Using MOSFET tube, the heat dissipation effect is better4. Adopt special power chip, support 12V-24V power input5. 24V input is possible, and the current of the hot bed can be reduced to 1/4 under the same system power, which effectively solves the heating problem of the hot bed MOS tube6. The firmware can use the open source firmware MarIin, the configuration is exactly the same as that of ramps 1.4, and can directly replace Ramps1.47. Can be directly connected to Ramps1.4, 2004LCD control board and 12864LCD control board

Read more less

1. Finely made, no burrs, comfortable and smooth to the touch2. With screws and nuts, easy to install3. Material: aluminum4. Applicable bandwidth: about 6mm5. Size: about 8.5 x 2.8cm6. Weight: about 58 grams

Read more less

1. Small and beautiful, snowflake heat sink design, more powerful heat dissipation2. The terminal has an insulating protective cover to prevent leakage and avoid contacts, making it safer to use3. 12V can use 360W, 24V can use 720W, to meet the external needs of high-power hot bed4. Description: during use, the current should not exceed 25A5. Size: about 7 x 4.5cm6. Weight: about 65 grams

Read more less

1. Modeling technology: FDM（fused deposition modeling）2. Printing Speed: maximum 100 mm/s3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: up to 260 celsius6. Heat bed temperature: up to 100 celsius7. Build surface: spring steel PC magnetic build plate8. Extrusion force: 80N9. Leveling mode: auto-leveling with CR-touch10. 4.3-inch color touch screen11. 32-bit silent motherboard12. Supported filament: PLA/ABS/TPU/PETG13. Nozzle diameter: 0.4 mm14. Print larger-size models, meet more printing needs15. Synchronized dual Z-axes, high precision printing16. Quick assembly, easy to handl

Read more less