DJI Avata Series

1. Effectively avoid damage to the fuselage due to impact by foreign objects during flight, improving flight safety2. Adopt tough material, crash-resistant, reduce accidental damage to the machine3. Real machine mold opening, suitable for Avata tailor-made, durable and wear-resistant4. Lightweight design, the whole set weighs only 22.3g, which does not affect flight use5. Equipped with paste reinforcement mud, which is stable and does not leave glue, easy to install and disassemble6. Using tough materials, good impact resistance and compression resistance, reducing accidental damage to the machine7. Main material: PP8. Size: 9.2x3.5x1.6cm9. Net weight: 22.3g10. Gross weight: 24.5gpacking list:-1 x Reinforced mud-4 x Bumper rings

Read more less

1. Stable power output of 65W, and two output ports USB-C and USB-A, can charge the battery and remote control at the same time2. Support PPS and PD protocols, also can charge cell phones, computers and other devices3. Universal interface, easy to use4. Packing list: charger x 1, dual USB-C cable x 15. Charging ambient temperature: 5-40 degrees Celsius6. Input voltage: 12.7-16V 6.5A7. DC output: USB-C: 5V 5A/9V 5A/12V 5A/15V 4.3A/20V 3.25A/5-20V 3.25A; USB-A: 5V 2A8. Compatible products: DJI Avata, DJI Mavic 3, DJI Mavic 3 Cine, DJI Goggles 2 battery

Read more less

1. Built-in intelligent battery management system, real-time monitoring and feedback of battery status, full of energy, intelligent guardian2. Charging manager can charge 4 batteries in sequence at the same time3. Battery capacity: 2420 mAh4. Nominal voltage: 14.76V5. Charging limit voltage: 17V6. Battery type: Li-ion7. Energy: 35.71 watt-hours8. Discharge multiplier: 7C typical9. Charging manager recommended charger: DJI 65W portable charger or other chargers supporting USB PD fast charging protocol10. Charge manager input: 5-20V, up to 5A11. Charge manager output: 17V12. Ambient temperature: 5-40 degrees Celsius13. Adapted products: for DJI Avata14. Packing list: battery x 2, charging manager x 1

Read more less

1. It can charge 4 batteries in turn at the same time, eliminating the trouble of replacing batteries one by one2. Charging time: about 47 minutes (measured when a single battery is suitable for charging with for DJI 65W portable charger, and it may vary slightly depending on the ambient temperature)3. Operating ambient temperature: 5 to 40 degrees celsius4. Output voltage: 17V5. Input voltage: 5-20V6. Rated current: 5A7. Compatible products: suitable for DJI Avata8. Note: the product does not contain batteries

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Silicone strap x 1

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

1. Silicone protective cover for the mask, wear-resistant and dirt-resistant, to protect the contact surface of the face of the flight glasses from sweat/oil/cosmetic erosion. 2. Soft silicone, surface oil spray treatment, smooth and comfortable touch, experience a different flight journey. 3. Easy to replace, easy to clean, convenient and hygienic. 4. Real machine open mold, fit the mask to prevent light leakage, as if the bare machine as comfortable to wear. 5. High-quality safety material, comfortable to wear, durable, and safer to use

Read more less

1. Large-capacity partition storage, can hold the fuselage, glasses V2 or glasses 2, motion controller, battery, propellers, etc.2. Webbing handle, easy to carry3. Hardware two-way slider, easy to use and smooth4. The real machine molded EVA liner is very good for protecting equipment5. Applicable models: suitable for DJI AVATA6. Material: shell nylon + EVA, liner EVA7. Dimensions: about 40 x 30 x 11.5cm8. Weight: about 1080g

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body, 2. Reinforced gluten noodle design can be kneaded at will without deformation, 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable, 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use, 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Neck Strap x 1

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and drone remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience Note: Do not include the Remote controller and drone

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced gluten noodle design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and drone remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience Note: Do not include the Remote controller and drone

Read more less

Features1. Use soft silicone material to prevent foreign objects from colliding or scratching the body, 2. Reinforced gluten noodle design can be kneaded at will without deformation, 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable, 4. High-quality safety lanyard, comfortable to wear, firm and durable, and safer to use, 5. Easy to disassemble and install.Package List1. Silicone case x 1 2. Neck Strap x 1

Read more less

Features1. Suitable for old and new glasses/handles. Compatible with Goggles 2 and RC Motion 2/1. 2. Professional waterproof, safety box tightly closed and sealed, splashing or sprinkling water can effectively avoid water leakage. 3. High strength, drop resistance, compression resistance, corrosion resistance, high and low temperature resistance. The use of super impact resistant hard material, anti-fall resistance, not easy to deform, strong load-bearing capacity. 4. High-quality shockproof inner support, precise mold opening, tight storage to protect your equipment. 5. Comfortable soft rubber handle, comfortable to feel, non-slip and wear-resistant, relieve hand pressure.Specifications1. Material: Plastic + EVA 2. Model: AQX-6-U 3. Size: 35.4 x 29.4 x 13.7cm 4. Net weight: 1.47kg

Read more less

1. Specially designed for DJI Avata's new advanced kit and exploration kit, precise mold opening, small size and large capacity;2. PU leather fabric is waterproof, with exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. High-quality handle, easy to carry;5. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant;6. By adjusting the shoulder strap, the extra shoulder strap can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance.7. Size: 32 x 26.5 x 12.3cm8. Weight: 864.5g

Read more less