DJI Mavic Series

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film.2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety.3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film.4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned.5. Smooth surface: Even the edge of the protective film is very smooth.6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly.7. Durable: With good performance, it can be used for a long time.Installation notes:1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation.2. Peel off the protective layer on the adhesive side.3. Carefully align the glass film with the screen.4. Press the center of the glass film and the adhesive part will spread out smoothly.Reminder:1. Since this is a glass product, please note that the edge of the glass is a fragile area.2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film.3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. ABS+PC hard shell, good protection performance2. The back cover has a compartment, which can hold a thin laptop or tablet3. EVA liner fixed equipment does not shift, prevents friction and bruises, high hardness and not easy to deform4. Two-way smooth metal slider, easy to use and beautiful5. Encrypted mesh on the back, comfortable, breathable and pressure-free6. The soft handle is reinforced with jujube to prevent it from being strangled7. Capacity: can hold the fuselage, RC 2 or RC N2 remote control, original battery butler (not compatible with the sub-factory), 6 batteries, filter box, battery butler, paddle data cable, original charger, Joystick, etc.8. Compatible with DJI AIR 3 UAV9. Material: shell cover ABS+PC, liner EVA10. Dimensions: about 42 x 30 x 14cm11. Weight: about 1350g

Read more less

1. High-quality alloy double sliders, two-way opening and closing smoothly without jamming2. EVA shell, anti-shock protection equipment3. Ribbon handle, easy to carry4. Capacity: It can store the body, RC-N2 or RC 2 remote control, the original battery butler (not compatible with the sub-factory), 6 batteries, the original filter box, joystick, propeller, data cable charger, etc.5. Suitable for AIR 3 UAV6. Material: nylon + EVA liner EVA7. Dimensions: about 40 x 30 x12.5cm8. Weight: about 1080g

Read more less

1. The durable propeller cover specially designed for DJI AIR 3 is made of high-quality lightweight materials with high strength and good toughness, which will not affect the normal flight of DJI AIR 3. 2. The surrounding isolation structure protects the blades and prevents the blades from scratching people or objects, making the flight safer. 3. High-toughness material, which can effectively buffer the impact force and provide protection for the drone in flight. 4. Snap-on design for quick assembly and disassembly without scratching the drone body. 5. Split design, can be divided into 4 parts, easy to store and carry.

Read more less

1. Silicone protective case with light hood, which can not only protect the remote control and screen, but also effectively block light.2. Thickened and reinforced lens hood, sturdy and stylish without blocking the view. It does not collapse or deform, can be kneaded at will and is durable.3. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover prevents foreign objects from colliding and scratching the remote control.4. Anti-slip texture design. When flying outdoors, it effectively prevents sweaty hands from slipping, making it safer and more comfortable to hold.5. Reserve the antenna hole position without affecting the signal.6. Applicable models: Suitable for DJI RC 27. Net weight: 106g

Read more less

1. Soft silicone, comfortable to the touch, giving you a touch like baby skin.2. It does not collapse or deform, can be kneaded at will and is durable.3. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover prevents foreign objects from colliding and scratching the remote control.4. Anti-slip texture design. When flying outdoors, it effectively prevents sweaty hands from slipping, making it safer and more comfortable to hold.5. Reserve the antenna hole position without affecting the signal.6. Applicable models: Suitable for DJI RC 27. Net weight: 56g

Read more less

1. Soft silicone, comfortable to the touch, giving you a touch like baby skin.2. It does not collapse or deform, can be kneaded at will and is durable.3. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover prevents foreign objects from colliding and scratching the remote control.4. Anti-slip texture design. When flying outdoors, it effectively prevents sweaty hands from slipping, making it safer and more comfortable to hold.5. Reserve the antenna hole position without affecting the signal.6. Applicable models: Suitable for DJI RC 27. Net weight: 56g

Read more less

1. Silicone protective case with light hood, which can not only protect the remote control and screen, but also effectively block light.2. Thickened and reinforced lens hood, sturdy and stylish without blocking the view. It does not collapse or deform, can be kneaded at will and is durable.3. Anti-scratch, drop-proof and dust-proof, soft silicone protective cover prevents foreign objects from colliding and scratching the remote control.4. Anti-slip texture design. When flying outdoors, it effectively prevents sweaty hands from slipping, making it safer and more comfortable to hold.5. Reserve the antenna hole position without affecting the signal.6. Applicable models: Suitable for DJI RC 27. Net weight: 106g

Read more less

1. Specifically designed for DJI Mini 4 Pro, it has a stylish appearance, small size but large capacity. It can also store the aircraft and a full set of accessories (both remote controls can be used);2. Made of high-quality EVA + high-density sponge lining, precision processing, precise fit, hardness and flexibility, which can better protect your items;3. Highly tight and waterproof, can withstand repeated water spray tests and is durable;4. The portable handle has strong load-bearing capacity, feels comfortable and does not tighten the hand, and relieves hand pressure. It can also be worn cross-body and the length can be adjusted freely;5. Material: ABS+EVA+high-density sponge6. Size: 35.3x26.2x11.4cm7. Weight: 1569.8g

Read more less

1. Specially designed for DJI mini 4 Pro, providing comprehensive protection for your drone.2. High-quality PU leather fabric, exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. The unique handle, the appearance is easy to carry, and can also be directly stored in a backpack;5. The internal Lycra double-layer fabric and shock-absorbing lining precisely fit the fuselage and accessories, effectively fixing it, preventing collisions and friction, and no fear of extrusion, ensuring long-lasting protection for your drone whether it is transported or stored.6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance;

Read more less

1. Specially designed for DJI mini 4 Pro, providing comprehensive protection for your drone.2. High-quality PU leather fabric, exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. The unique handle, the appearance is easy to carry, and can also be directly stored in a backpack;5. The internal Lycra double-layer fabric and shock-absorbing lining precisely fit the fuselage and accessories, effectively fixing it, preventing collisions and friction, and no fear of extrusion, ensuring long-lasting protection for your drone whether it is transported or stored.6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance;

Read more less

Features:1. Specially designed for DJI Mini4 Pro, it fits the curved surface of the fuselage very well.2. It can fix and protect the propeller to prevent rolling and damage during storage, making storage and transportation safer.3. Made of high-quality PU, strong toughness, high-strength molding, sturdy and durable, and will not damage the fuselage and propeller.4. Velcro design facilitates installation and disassembly.5. Lightweight design, small size, light weight, easy to carry and store, and does not take up space.Specifications:1. Material: PU2. Size: 2*55*255mm3. Weight: 6.5g

Read more less

1. Specially designed for DJI mini 4 Pro, providing comprehensive protection for your drone.2. High-quality PU leather fabric, exquisite appearance and upgraded taste;3. Two-way zipper, smooth and not stuck;4. The unique handle, the appearance is easy to carry, and can also be directly stored in a backpack;5. The internal Lycra double-layer fabric and shock-absorbing lining precisely fit the fuselage and accessories, effectively fixing it, preventing collisions and friction, and no fear of extrusion, ensuring long-lasting protection for your drone whether it is transported or stored.6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance;

Read more less

1. Specially designed for the Mavic 3 Pro series, it not only protects the gimbal camera but also stores the paddles, making it easy to access and store the aerial camera.2. Supports use when installing Cellular module.3 Compatible products:-Mavic 3 Pro-Mavic 3 Pro Cine4. Weight: 55.26 grams5. In The Box:Mavic 3 Pro Storage Cover x 1

Read more less

1. Provides a max flight time of 34 minutes, allowing you to fly and create freely with peace of mind.2. Weight: about 77.9 grams3. Capacity: 2590 mAh4. Nominal voltage: 7.32 volts5. Max Charging Voltage: 8.6 V6. Battery type: Li-ion7. Energy: 18.96 watt hours8. Charging time:-70 minutes (with the DJI 30W USB-C Charger and the battery mounted to the aircraft)-58 minutes (with the DJI 30W USB-C Charger and the battery inserted into the Two-Way Charging Hub)9. Charging Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit)10. Recommended Chargers: DJI 30W USB-C Charger or other USB Power Delivery chargers11. Compatibility:DJI Mini 4 Pro

Read more less

1. High-quality environmentally friendly silicone protective case, effectively anti-fall, anti-shock, anti-scratch, reducing damage, making use and storage more worry-free. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. The surface is sprayed with oil, which is as moist as baby skin, beautiful and comfortable. 4. The precise hole position and the remote control are just right, harmonious and beautiful, without affecting the flight control. 5. Flexible and elastic, easy to disassemble and assemble. Warmth tips: This product only contains a silicone protective case and does not include the RC 2 remote control shown in the picture.

Read more less

1. High-quality environmentally friendly silicone protective case, effectively anti-fall, anti-shock, anti-scratch, reducing damage, making use and storage more worry-free. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. The surface is sprayed with oil, which is as moist as baby skin, beautiful and comfortable. 4. The precise hole position and the remote control are just right, harmonious and beautiful, without affecting the flight control. 5. Flexible and elastic, easy to disassemble and assemble. Warmth tips: This product only contains a silicone protective case and does not include the RC 2 remote control shown in the picture.

Read more less

1. You can check the battery power;2. Small size;3. Can charge 3 batteries in sequence;4. Automatically detect and give priority to charging batteries with high power;5. The screen of the charging butler with a screen will display the voltage, current, power, and battery temperature during charging;

Read more less

1. The Yagi antenna uses a brass director to increase the transmission distance and stability of the remote control;2. The carrier uses high-quality raw materials to make the product more durable and practical;3. Each weighs only 8.2g, small and portable;4. Non-destructive installation design, plug and play, fast and convenient;5. Compatible models: Suitable for Air 3/Mini 4 Pro drone RC 2 remote control5. Product weight: 16.4g6. Product size: 6.5 x 1.9 x 2.5cm

Read more less

Features1. Specifically designed for DJI mini 4 Pro, it fits the curved surface of the drone body very well. 2. It can fix and protect the propeller to prevent rolling and damage during storage, making storage and transportation safer. 3. Made of high-quality ABS+silica gel, with optional colors, strong toughness, high-strength molding, strong and durable, and will not damage the fuselage and propellers. 4. The snap-on design is convenient for installation and disassembly, with two gears available to choose according to personal needs, without squeezing the drone body and blades. 5. Lightweight design, small size, light weight, easy to carry and store, does not take up spacePackage List1. Propeller x 1 2. Instruction card x 1 3. Color box x 1

Read more less

Features1. Specifically designed for DJI mini 4 Pro, it fits the curved surface of the drone body very well. 2. It can fix and protect the propeller to prevent rolling and damage during storage, making storage and transportation safer. 3. Made of high-quality ABS+silica gel, with optional colors, strong toughness, high-strength molding, strong and durable, and will not damage the fuselage and propellers. 4. The snap-on design is convenient for installation and disassembly, with two gears available to choose according to personal needs, without squeezing the drone body and blades. 5. Lightweight design, small size, light weight, easy to carry and store, does not take up spacePackage List1. Propeller x 1 2. Instruction card x 1 3. Color box x 1

Read more less

Features1. The durable propeller protective cover specially designed for DJI Mini 4 Pro will not affect the normal flight of the drone and will not block the arm indicator lights. 2. The enclosed isolation structure protects the blades and prevents them from scratching people or objects, making the flight safer. 3. Made of high-quality ABS material, it has high strength and good toughness, which can effectively buffer the impact force and provide protection for the drone during flight. 4. Snap-on design allows for quick assembly and disassembly without scratching the drone body. 5. Split design, can be split into 4 parts for easy storage and portability. 6. Size: Front 19.9x11.8x3.4cm; Rear: 20.1x11.6x4.2cmPackage List1. Propeller Protector Ring No. 1 x 1 2. Propeller Protector Ring No. 2 x 1 3. Oar protection ring No. 3 x 1 4. Propeller Protector Ring No. 4 x 1 5. Color box x 1 6. Instruction manual x 1

Read more less

1. Provides ND16/64/256 light-reducing filter sets to cope with daytime high-light shooting environments2. Can meet the needs of high light suppression and long exposure photography, such as long exposure time-lapse photography3. Adaptable products: For DJI Mini 4 Pro.4. Packing list: ND16 light-reducing lens x 1, ND64 light-reducing lens x 1, ND256 light-reducing lens x 15. Weight: about 0.75 grams (single)

Read more less

1. Lightweight texture, can fully wrap the paddle, to avoid paddle injury or damage due to foreign object impact, make the flight safer2. It is especially suitable for indoor and obstacle-ridden scenarios, which brings more safety for novice learners3. Adaptable products: suitable for DJI Mini 3 / 3 Pro4. Weight (one side): about 42g5. Radius: about 94mm6. Maximum dimensions after installation: length 416 mm, width 334 mm, height 89 mmTips:1. Before installing the blade protector on the Mini 3 Pro, make sure that you have upgraded the firmware of the aircraft to v01.00.0450 and above, otherwise flight stability cannot be ensured2. Mini 3 Pro has no obstacle avoidance function after installing the blade protector, and cannot actively go around or brake when encountering obstacles; when using the Smart Flight function, the aircraft also has no obstacle avoidance ability3. After installing the blade protector, the weight of the aircraft will be more than 250 grams, some countries and regions may need to obtain the appropriate license, please carefully understand and comply with local laws and regulations before flying4. After installing the blade protector, please do not use the long-life smart flight battery or install Cellular module, otherwise it will easily lead to a full load of power during the flight, which cant guarantee the safety of the flight

Read more less

1. Shockproof Multi-arc Supporter Arms. The upgraded multi-arc arms is shockproof, stable and safe. 2. Follow Principles of Mechanics Materials. After precise calculations and repeated testing, this lightweight, anti-collision and impact-resistant propeller guard was developed. 3. Stable Integrated Propellers Guard: anti-shake structure & safer protective ring. 4. Semi-surrounded Fortress Structure: Increasing tenacity for safer flying. 5. Can be used with Sunnylife LG664 spider tripod. 6. The support arm has a reinforced triangular design for better shock absorption and anti-shake. 7. Material: Plastic 8. Net weight: 84g

Read more less

1. Large capacity, huge capacity. It can store a drone, DJI RC2 or RC-N2, battery manager, 7 batteries (including one body), as well as accessories such as propellers, data cables, chargers, lanyards, Sunnylife filter boxes or spider tripods. 2. Professional waterproofing, the safety box is tightly closed and sealed, which can effectively prevent water leakage when splashing or sprinkling water. 3. High strength, impact resistance, corrosion resistance and high and low temperature resistance. Made of super impact-resistant hard material, it is drop-resistant, not easily deformed, and has strong load-bearing capacity. 4. EVA shockproof inner support, precise mold opening, tight storage and protection of your equipment. 5. Comfortable soft rubber handle, comfortable in hand, non-slip and wear-resistant, relieving hand pressure. 6. Material: plastic + EVA 7. Net weight: 1.53kg

Read more less

1. The rocker adopts a detachable design. It can be rotated and installed on the remote control when in use, and can be stored in the groove of the remote control when not in use.2. Material: aluminum alloy3. Compatibility: RC/RC 24. Compatible drone models: for Mini 3 pro/Mini 4 pro/Air 3/Mavic 35. Packing list: remote control joystick (pair) x 1

Read more less

1. Effectively block light, suppress astigmatism in the picture, and prevent stray light from entering the lens. 2. Specially designed for AIR 3, lossless flight. It does not affect the shooting picture and fits the curve of the fuselage. 3. Precise mold opening ensures light-blocking effect without affecting shooting and lens rotation. 4. Can be used with Sunnylife LG664 spider tripod. 5. Material: plastic 6. Net weight: 12g

Read more less

1. Small but very light-blocking. While having a mini and exquisite appearance, it can also effectively block light and prevent light leakage, making it tailor-made, lightweight and portable. 2. Soft silicone corners, smooth operation without irritation, considerate and user-friendly design. 3. Tailor-made, lossless shading, full-screen display. Does not affect the touch screen and does not block the screen. 4. Detachable and easy-folding hood, comes with storage buckle for easy storage. The stand does not require disassembly and can be stored in the Sunnylife B657 remote control bag or B659/B660 suit bag. 5. Material: Leather + silicone 8. Net weight: 67g

Read more less

1. Integrated protection of the gimbal, lens and sensor: it can protect the omnidirectional vision system at the same time, preventing bumps, scratches and dust. 2. Fix the gimbal lens to extend the service life of the cable. 3. Transparent gray protective cover makes it easy to observe the status of the gimbal lens at any time. 4. No need to remove the lens cover, it can be safely stored in the original bag, Sunnylife B658 body bag, B659 streamlined suit bag, B660 multi-electric suit bag, and AQX-10/AQX-11 safety box. 5. Material: plastic 6. Net weight: 26g

Read more less

1. Follow the principles of material mechanics and have a super impact-resistant structure. After precise calculations and repeated testing, this lightweight, anti-collision and impact-resistant anti-collision ring was developed. 2. Multi-arch structure, collision and impact resistance, anti-collision upgrade is safer. 3. Connected end to end, stable and anti-shake. The front and rear rings are connected and integrated to reduce resonance and make it more stable. 4. Snap-on structure, easy and quick to install and disassemble. 5. Isolate the propeller blades to protect the propeller and prevent the propeller from scratching people or objects to a large extent. 6. Can be used with Sunnylife LG700 spider tripod. 7. Material: Plastic 8. Net weight: 46g

Read more less

1. Frog shape, unique and exquisite2. Integrated protection for head, lens and sensor, anti-scratch, anti-dust, and protect the front vision system at the same time3. Fixed head lens, extend the service life of the cable4. Quick installation, no need to disassemble, easy to store5. Material: plastic6. Applicable models: for DJI Mini 4 Pro7. Weight: about 21g8. Size: about 7.4 x 6.2 x 5.7cm9. Description: only the lens protection cover, does not include other items in the picture

Read more less

1. Multifunctional light-shielding protective cover. The unique two-in-one design is both a protective cover and a visor. 2. The damping rotating shaft shading plate can be stopped at any angle, and the shading performance is greatly improved. 3. It closes with one click and is easy to use, eliminating the need to repeatedly disassemble and assemble the rocker. 4. Anti-scratch and dust-proof, effectively protecting the rocker and buttons. Fits the shape and structure of the remote control to prevent squeezing of the rocker and accidentally touching the buttons. 5. Stable clamping, not easy to loosen, and does not affect the storage of the remote control and mobile phone holder. 6. Material: Plastic 7. Net weight: 49g

Read more less

Features1. Portable and lightweight 2. Stable and reliable 3. Long-lasting battery life, built-in large-capacity lithium battery 4. Long-distance transmission, supporting calls at altitudes up to 3 kilometers 5. Applicable to a wide range of models, suitable for DJI Mini series, Air series, Mavic series dronesPackage List1. Megaphone x 1 2. Walkie-talkie x 1 3. Charging cable x 1 4. Fixing bracket x 1 5. Hand screw x 1 6. Large silicone ring x 1 7. Small silicone ring x 1 8. Instruction manual x 1

Read more less

1. Can store the drone body, remote control and 3 batteries (1 of them is on the drone body)2. Resistant to external pressure, using EVA material, pressure-resistant, anti-slip and wear-resistant3. Double zipper design, easy to use, smooth and not jammed.4. Wider carrying strap design, sturdy and solid5. Suitable for DJI Mini 3 / Mini 3 Pro6. Material: EVA7. Weight: about 260g8. Size: about 24 x 19 x 9cm9. Note: drone and other accessories in the picture are for display only, shipping does not include

Read more less

1. High toughness material, high aerodynamic efficiency;2. High-quality PC, durable;3. The single chip weighs only 0.9g, has low power consumption, strong endurance and stable flight.4. Quick disassembly and assembly, saving time and effort.5. Suitable for Mini 4 Pro 6030F propeller6. Main material: PC7. Attribute: orange edge8. Net weight: 10.7g (2 pairs), 18.2g (4 pairs)9. Product size: 7.5 x 1.8cm10. Packaging method: boxed (pack of 2 pairs), bag (pack of 4 pairs)Note: When replacing propellers, you must use propellers from the same package. Do not mix them with propellers from other packages.?

Read more less

1. High toughness material, high aerodynamic efficiency;2. High-quality PC, durable;3. The single chip weighs only 0.9g, has low power consumption, strong endurance and stable flight.4. Quick disassembly and assembly, saving time and effort.5. Suitable for Mini 4 Pro 6030F propeller6. Main material: PC7. Attribute: orange edge8. Net weight: 10.7g (2 pairs), 18.2g (4 pairs)9. Product size: 7.5 x 1.8cm10. Packaging method: boxed (pack of 2 pairs), bag (pack of 4 pairs)Note: When replacing propellers, you must use propellers from the same package. Do not mix them with propellers from other packages.?

Read more less

Features1. Specifically designed for DJI AIR 3, it fits the four legs brackets of AIR 3 and has a split tripod design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes, and will not open for obstacle avoidance. 2. Can effectively increase the distance between the drone and the ground by 25 mm. When AIR 3 takes off or lands on uneven ground, it can reduce the impact force, allow the drone to land smoothly, and protect the AIR 3s body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the DJI AIR 3 drone ability to adapt to the ground environment during takeoff and landing. 3. Adopting a split quick-release design, the battery can be quickly replaced without disassembly, and does not affect the folding of the drone arms. You only need to disassemble the heightening tripods on the two rear tripods to store them in the original bag, STARTRC special bag, and commercially available bags. In most bags, the other two disassembled tripods are also small and easy to carry. 4. Lightweight design. The entire landing gear weighs 32g. The lightweight design will not add extra burden to the flight of AIR 3, and it will not shake or fall off during flight. 5. Note: It cannot be used with propeller protection; the aircraft cannot be put into a waterproof box or other storage equipment without removing the rear tripod.Specifications1. Material: ABS 2. Dimensions: Front leg: 86x49x29mm; Rear leg: 58x48x29mm 3. Weight: 32gPackage List1. Left front leg stand x 1 2. Left rear leg stand x 1 3. Right front leg stand x 1 4. Right rear leg stand x 1 5. Instruction manual x 1

Read more less

1. Hard-shell ABS+PC film (surface carbon fiber texture, scratch-resistant), the fabric part is made of gray waterproof Oxford cloth, and the inner pearl cotton has good shock absorption effect and enhanced resilience.2. The backpack has specially enhanced the width and thickness of the shoulder straps. The back is made of a large piece of EVA that is one-piece and hot-pressed to fix the shape of the bag and prevent wrinkles. The back is widened and thickened with breathable cotton to prevent sweat, disperse and relieve pressure on the back, making the shoulders and back more comfortable when wearing it. .3. Surface waterproof fabric blocks moisture.4. Large capacity, easy to store, can accommodate the body, RC 2 or RC-N1 remote control, 5 batteries (including body battery), remote control charger, charging cable, charging butler and other accessories.5. Reinforced handle to relieve hand pressure and make it easier to go out.6. Material: hard shell ABS+PC film, pearl cotton7. Applicable models: Applicable to DJI Mini 4 Pro8. Product size: 400 x 280 x 150mm9. Weight: 1020g?

Read more less

1. Hard-shell ABS+PC film (surface carbon fiber texture, scratch-resistant), the fabric part is made of gray waterproof Oxford cloth, and the inner pearl cotton has good shock absorption effect and enhanced resilience.2. The backpack has specially enhanced the width and thickness of the shoulder straps. The back is made of a large piece of EVA that is one-piece and hot-pressed to fix the shape of the bag and prevent wrinkles. The back is widened and thickened with breathable cotton to prevent sweat, disperse and relieve pressure on the back, making the shoulders and back more comfortable when wearing it. .3. Surface waterproof fabric blocks moisture.4. Large capacity, easy to store, can accommodate the body, RC 2 or RC-N1 remote control, 5 batteries (including body battery), remote control charger, charging cable, charging butler and other accessories.5. Reinforced handle to relieve hand pressure and make it easier to go out.6. Material: hard shell ABS+PC film, pearl cotton7. Applicable models: Applicable to DJI Mini 4 Pro8. Product size: 400 x 280 x 150mm9. Weight: 1020g

Read more less

1. A simple handbag specially designed for Mini 4 pro. It can hold tablets under 7.9 inches, RC2 or RC-N2 remote controls, 6 batteries (including body/housekeeper batteries), battery manager, 2 sets of joysticks, and charging Wires, blades, etc.2. 600D waterproof and scratch-proof fabric/PU fabric ensures the safety of the drone in rainy days (fabric optional)3. Precise inner mold opening design, tight fit, stable and non-displaceable4. Retractable elastic handle makes storage in luggage more convenient5. Two-way opening and closing zipper, easy to use6. Exquisite workmanship, preferred hardware accessories7. Fabric: 600D nylon/PU leather (optional)8. Lining: EVA9. Dimensions: 29 x 21 x 11cm10. Weight: 0.8kgNote: The drone and accessories are demonstration samples and are not included in delivery.?

Read more less

1. The lens hood is specially designed for DJI Mini 4 Pro. It will not affect flight, nor will it affect the use of the front-view vision system, top- and bottom-view vision systems, infrared and fill light. 2. Effectively block light, suppress astigmatism in the picture, and prevent stray light from entering the lens. At the same time, the sunshade will not appear in the left, right, and lower shooting fields. 3. The raised side panel design not only enhances the light-shielding function, but also effectively protects the gimbal and lens during takeoff and landing. 4. Easy to install and disassemble, stable and not easy to fall off after installation. 5. Note: When the gimbal is raised upwards, the hood will affect the upper shooting field of view to a certain extent.

Read more less

Features1. The remote control drone delivery device is specially customized for DJI AIR 3 drones. The functions of the mounting bracket and the launcher are two-in-one. It can release objects through the launcher and 1/4 mm of the mounting bracket. The head screws enable the mounting of small items such as action cameras. 2. Photosensitive setting allows direct control of delivery by remote control. Use the remote control to control the drones fill light to drop items. Turn on the drones fill light to start dropping, and turn off the fill light after the drop. The delivery distance is the same as the drones remote control distance. 3. The recommended load is about 400g (loading items + dropping items, for reference, please refer to the weight of RC 2 - 420g). The built-in battery capacity is 50mAh. It can be fully charged in half an hour. After full charging, it can be used about 400 times. 4. It is easy to install and disassemble. It is fixed on the fuselage through the mounting bracket. There are clips on the dispenser to prevent it from shaking or loosening or blocking the drones visual positioning sensor. The dispenser weighs 57g and will not affect the drones operation. flight. 5. Can be used in advertising, bait throwing, gift throwing, wedding flower delivery, ring delivery, food delivery, field medical supplies rescue, family reunion, Halloween, Christmas, Valentine Day, birthday parties, beach parties and other scenes to provide a perfect solution for life Add unlimited fun. 6. It can be used without turning off the obstacle avoidance function and will not be recognized.

Read more less

1. Drone remote delivery, used for advertising, throwing fish bait to send gifts, food delivery, wedding ring throwing, etc.2. With charging indicator, red light when charging, green light when full3. Suitable for DJI Mavic 3 Pro / 3 / 3 Classic / 3 Cine4. Load: up to 500g5. Built-in battery capacity: 150mAh6. Standby time: about 12 hours7. One charge can be turned on about: 200 times8. Charging time: about 1.5 hours9. Charging port: Type-C10. Material: ABS+PCB11. Net weight: about 82g12. Description: only the thrower, does not include other products such as the drone in the pictureInstallation steps:1. Unfold the bracket2. Align the front of the bracket with the slot of the drone and press down3. Put the adhesive tape into the hole on one side of the folding bracket and tighten itDisassembly: open it by breaking the buckle upward

Read more less

1. Suitable for DJI Royal 3 Pro / 3 / 3 Classic / 3 Cine2. Made of environmentally friendly plastic material, 3D printing process, and the part of the fuselage fit with sponge protection3. Support a variety of camera mounting methods, can be mounted on the top or bottom, can also be used as a handheld takeoff and landing4. With 1/4 screw connection, support all panoramic cameras and sports cameras with 1/4 screw holes5. Warm tips: this product must be handheld takeoff and landing or find a hollow frame in the middle as a landing support, be sure to close the downward-looking obstacle avoidance before operation6. Material: PLA7. Net weight: about 50g8. Size: about 11 x 11 x 3.5cmNote: shipment only includes the stand, not include the demo drone and camera etc.

Read more less

1. The inside of the bracket is smooth and flat, preventing scratches on the body and making it safe to use2. With 1/4 adapter screw, compatible with more devices3. Connect the tripod (not included) can be used as a handheld stand to meet different needs4. The bottom of the stand does not touch the ground, does not affect the takeoff and landing, and has a certain safety distance from the ground, to protect the machine from injury5. Lightweight and portable, flight safety, does not affect the endurance6. Fits the fuselage, not easy to shake, stable shooting picture7. Multiple mounting methods, wide range of uses, to meet different combinations8. Environmentally friendly and high toughness material, not easy to break.9. After installation, it can be folded without disassembling, no need to disassemble every time you store it10. Suitable for DJI Mini 4 PRO / Mini 3 PRO / Mini 3 11. Weight: about 22.5g12. Size: about 7.5 x 6.5 x 2.7cm13. Note: shipment only includes the stand, not including the demo drone, lights and camera, etc.

Read more less

Features1. The light propellers specially designed for DJI AIR 3 series are more colorful and cool when flying at night, and at the same time bring more detailed protection to night flights. 2. Colorful lighting effects. There are 3 light flashing modes that can be switched freely with one click. With long exposure photography technology, you can take photos with great visual impact and bring more fun to night flights. 3. The built-in battery can be recharged and used. The charging time is about 0.5 hours. The battery usage time is more than 50 minutes. 4. Made of transparent PC material, it is durable and has good light transmittance. The weight of a single blade is only 12.8g, which is light and stable and will not affect the endurance and normal flight of the AIR 3 series drones. 5. New aerodynamic design, excellent noise reduction performance, the same excellent performance as the original blades, without shaking.Package List1. Flashing ring propeller R x 2 2. Flashing ring propeller L x 2 3. Charging cable x 1 4. Instruction manual x 1

Read more less

1. Stop The Hood in Any Angles. We use two sun hoods with damped shaft to guarantee satisfied sunshade in any angles. 2. Upgraded Vice Hood. It is easier to get a satisfied sunshade effects with two sun hoods. 3. "Invisible" Lid. The lid can be completely hidden inside the hood, and perfectly fits to it. 4. Protect Screen, Button and Control Sticks. Prevent screen and buttons from scratches and bumps. 5. The equipped screw hooks help fixing the controller cover, and make it easier to use neck straps. 6. No Need to Remove Control Sticks. 7. Material: Plastic 8. Net weight: 100g

Read more less