WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico(With Wi-Fi Module)


1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.
2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.
3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).
4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.
5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.
6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.
7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.
8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.
9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.
10. On-board digital isolation to prevent external signals from interfering with the control chip.
11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.
12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.
13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.
14. Rail-mounted ABS protective casing for easy installation and safer use.
15. USB 1.1 host and device support.
16. Supports low-power sleep and hibernation modes.
17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading
18. 34 multi-functional GPIO pins
19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels
20. 12 programmable I/O (PIO) state machines for custom peripheral support

Product parameters:
1. Power supply voltage: 5V
2. Functions: device power supply, USB communication, and firmware download, etc.
3. Interface type: terminal block
4. Direction control: hardware automatically detects and controls data transmission direction
5. Interface protection: provides TVS tube protection, surge and electrostatic protection
6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap
7. Contact type: one normally open, one normally closed
8. Isolation type: optocoupler isolation
9. RGB: colorful cool LED beads, customizable display colors
10. PWR: power indicator light, lights up red when USB is connected and voltage is detected
11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface
12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface
13. Power supply range: 7V-36V
14. Casing: rail-mounted ABS protective casing
15. Dimensions: 145 x 90 x 40 mm


Specification:
Package Weight
One Package Weight 0.07kgs / 0.16lb
One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch
Qty per Carton 30
Carton Weight 3.20kgs / 7.05lb
Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch
Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs
40HQ: 1414 cartons * 30 pcs = 42420 pcs

WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico(With Wi-Fi Module)

Product form

SKU: TBD0604248501A

  • In stock (Processing Time 1 - 72 hours)

€61,69

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.
    2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.
    3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).
    4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.
    5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.
    6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.
    7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.
    8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.
    9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.
    10. On-board digital isolation to prevent external signals from interfering with the control chip.
    11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.
    12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.
    13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.
    14. Rail-mounted ABS protective casing for easy installation and safer use.
    15. USB 1.1 host and device support.
    16. Supports low-power sleep and hibernation modes.
    17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading
    18. 34 multi-functional GPIO pins
    19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels
    20. 12 programmable I/O (PIO) state machines for custom peripheral support

    Product parameters:
    1. Power supply voltage: 5V
    2. Functions: device power supply, USB communication, and firmware download, etc.
    3. Interface type: terminal block
    4. Direction control: hardware automatically detects and controls data transmission direction
    5. Interface protection: provides TVS tube protection, surge and electrostatic protection
    6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap
    7. Contact type: one normally open, one normally closed
    8. Isolation type: optocoupler isolation
    9. RGB: colorful cool LED beads, customizable display colors
    10. PWR: power indicator light, lights up red when USB is connected and voltage is detected
    11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface
    12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface
    13. Power supply range: 7V-36V
    14. Casing: rail-mounted ABS protective casing
    15. Dimensions: 145 x 90 x 40 mm


    Specification:
    Package Weight
    One Package Weight 0.07kgs / 0.16lb
    One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch
    Qty per Carton 30
    Carton Weight 3.20kgs / 7.05lb
    Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch
    Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs
    40HQ: 1414 cartons * 30 pcs = 42420 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account