Consumer Electronics

1. It is just suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure.2. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation.3. The laser beam is composed of two high-power laser diodes, using FAC technology. The minimum focus point reaches 0.04x0.04mm (A40640 module). Support NEJE advanced laser module, built-in fast intelligent drive, timely temperature feedback, intelligently adjust fan cooling. Safe and quiet to use.4. Wood, MDF, leather, paper, cotton, etc. are all supported. 8mm plywood only needs one air-assisted cut (A40640), and the cut is very clean. It can directly engrave stainless steel, glass, transparent acrylic, etc.5. 32-bit control system, the fastest speed can reach 200??,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS)6. You can take pictures with your mobile phone or choose pictures from the album.packing list? Laser engraver x1? A40640 Laser Module x1? 12V4A power supply x1? Manual x1? Goggles x1?Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, open-end wrench x1

Read more less

1. Suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time. 2. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure. 3. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation. 4. The newly designed A40630 module can cleanly cut 3mm thick plywood at one time, the minimum focus is 0.05x0.05mm, and the overlay can engrave metal. Built-in fast intelligent drive, timely temperature feedback, intelligent adjustment of fan cooling. Safe and quiet to use. 5. Wood, MDF, leather, paper, cotton, etc. are all supported. The blade is very clean. The finish spray can engrave stainless steel, glass, clear acrylic, etc. 6. 32-bit control system, the fastest speed can reach 200?￠?????￠????,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS) 7. You can take pictures with your mobile phone or choose pictures from the album. Packing list: Laser Engraver 1 Module 1 12V 3A power supply x1 US Plug Adapter 1 Manual 1 red glasses 1 (Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, opening Wrench x1)

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.2. Original laser diodes, good-quality, Ensure service life！3. Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor，NEJE factory 48 hours 100% power aging test, Ensure long time working！4. Clear focus lens, not stray light, adjustable focal length.5. Can carving MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.(Not suitable for iron or other metal).Specification1. Heatsink Material: Aircraft Aluminum + Brass Shell2. Luminous Color: Blue3. Laser diode: 5.6mm laser diode4. LD Current: 1.6A5. Section Size: 30mm x 30mm6. Cooling Mode: 20mm copper core + Heat Sink Groove+ Thermal silicone grease + 10000 rpm cooling fan7. Dimension: 60 x 30 x 30mm8. Adapter Output Voltage: DC 12V 2A9. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum10. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent MaterialTechnical Parameters1. Module Input: 10W2. Laser Output Power: 2.5W (2500mW)3. Wavelength: 445-450nm4. Beam Shape: Dot (Focusable)5. Voltage: DC 12V6. TTL&PWM Modulation: YES, compatible with Both TTL & PWM Modulation7. Input Voltage: DC12V8. PWM/TTL Input: DC3.3V-12V 9. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)Package Included- 1 x 2.5W Laser Engraving Module- 1 x 4 Pin Sport Cable- 2 x Screw- 2 x ABS cushion post- 1 x L-shaped wrench

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

1.Designed for laser engraver, 3D printer, CNC mill, arduino project.2. 7.5W Optical power output, 4mm plywood from 1 pass(speed 100).3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable.4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature.5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module.6. The slidable mounting fixture is provided for easy adjustment of focus.Specification1. Heatsink Material: Aircraft Aluminum + Brass Shell2. Luminous Color: Blue3. Section Size: 40mm x 40mm4. Cooling Mode: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan5. Dimension: 60 x 40 x 40mm6. Adapter Plug: 5.5 2.1 port7. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum8. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent MaterialTechnical Parameters1. Optical power output: 5.5W~7.5W2. Wavelength: 445-450nm3. Beam Shape: Dot (Focusable)4. Working Voltage: DC 12V5. TTL&PWM Modulation: YES, compatible with both TTL & PWM Modulation6. Input Voltage: DC12V 3A7. PWM/TTL Input: DC3.3V-12V8. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)9. Drive Mode: External ACC10. Safe temperature range: <60 degrees Celsius11. Module weight: 202g (The lighter the weight, the smaller the move inertia, the better the performance)12. Life Time: 10000-20,000 hoursPackage Included- 1 x Laser Engraving Module- 1 x Laser Module Sliding slot- 1 x 4 Pin Cable(32cm Cable)- 1 x NEJE interface tranfer board- 1 x 2.5mm L-shaped wrench- 1 x 5mm L-shaped wrench- 1 x 3pin input cable

Read more less

1. Power supply: 2 AAA batteries (not included)2. Voltage: 3.0V3. Working current: less than 15mA4. Frequency: 2.4GHz5. Remote control distance: about 10m6. Applicable equipment: TV7. Weight: about 62g8. Size: about 14.4 x 4.5cm

Read more less

Specification: 1. Module Input: 20W2. Laser Output Power: CW 5.5W , Pulse 7.5W3. Wavelength: 450nm4. Beam Shape: 0.05x0.05mm focus dot (focusable)5. Input Voltage: DC 12V6. TTL&PWM Modulation: YES, compatible with both TTL & PWM modulation7. Input Voltage: DC12V8. PWM/TTL Input: DC3.3V-12V 9. Input Interface：PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)10. Drive Mode: External ACC11. Safe temperature range: < 60 degrees Celsius12. Module weight: 202g Package Included- 1 x 5.5W Laser Engraving Module- 1 x 4 Pin Sport Cable- 2 x Screw- 2 x ABS cushion post- 1 x L-shaped wrench- 1 x PWM Tester

Read more less

1. Suitable for 600mm wide desktop, the left side of the machine is not limited by the material size. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, the engraving and cutting process can be completed at the same time. 2. The X-axis motion module is only 120g, driven by a 40mm-thick high-performance stepper motor, bringing a faster engraving experience than the gantry structure. 3. 3400 x 5600 pixels, engraving accuracy: 0.075mm dot pitch, 339 dots/inch. The function test of the whole machine only needs 4 screws to complete the installation. 4. The newly designed A40630 module can cleanly cut 3mm thick plywood at one time, the minimum focus is 0.05x0.05mm, and the overlay can engrave metal. Built-in fast intelligent drive, timely temperature feedback, intelligent adjustment of fan cooling. Safe and quiet to use. 5. Wood, MDF, leather, paper, cotton, etc. are all supported. The blade is very clean. The finish spray can engrave stainless steel, glass, clear acrylic, etc. 6. 32-bit control system, the fastest speed can reach 200?￠?????￠????,000mm/min, support LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS) 7. You can take pictures with your mobile phone or choose pictures from the album. Packing list: Laser Engraver 1 Module 1 12V 3A power supply x1 US Plug Adapter 1 Manual 1 red glasses 1 (Data cable x1, wooden board x1, paper x5, pen x1, brush x1, focusing film x1, angle iron x4, aluminum oxide film x1, cable tie x3, nut x5, big hexagon wrench x1, small hexagon wrench x1, opening Wrench x1)

Read more less

1. Charging time: about 1 hour 2. Battery capacity: 90mah 3. Usage time: about10 hours 4. Range frequency range: 2.4g 5. Method of connection method: automatic plug and play pairing 6. high performance 2.4GHz chip wireless transmission, stable connection 7. intelligent noise reduction, built-in noise reduction chip, with AI noise reduction algorithm, strong anti-interference ability

Read more less

1. Linkage control of smart devices to create smart home application scenarios 2. Built-in professional-grade Bluetooth Mesh gateway, the network is stable and reliable, and can connect 200 Bluetooth Mesh devices and 100 Bluetooth devices at the same time. 3. Built-in Bluetooth signal amplifier, wider signal coverage 4. Equipped with quad-core processing chip and built-in 4GB storage space to ensure real-time data calculation and reserved expansion 5. Support RJ45 wired direct connection and 2.4G/5G dual-band WiFi Parameter: 1. Model: ZSWG01CM 2. Product size: 87x87x30.5mm 3. Product weight: 279g 4. Power input: 12V 1A 5. Working temperature: -5 - 50 degree Celsius 6. Working humidity: 0%-95%RG no condensation 7. Wired connection: 10/100Mbps adaptive network port 8. Wireless connection: WiFi IEEE 802.11a/b/g/n/ac 2.4GHz/5GHz, Bluetooth 5.0 9. Support system: Android 7.0 or iOS11.0 and above Package list: 1 x Gateway 1 x Network cable 1 x Power adapter 1 x User manual

Read more less

1. Rated power: 3W2. Product size: 16.7 x 16.7 x 16.5cm3. Engraving area: 80 x 80mm4. Support system: for Windows/MAC/IOS/Android5. Support format: JPEG/JPG/PNG/BMP6. With a laser module, it can cut 0.2mm paper, wood, and leather, bringing you the fun of creating7. The detachable design can be used in many ways, and the engraving movement can be observed at any time without the need of goggles when the lens is installed, and there is no pressure to watch with the naked eye!8. Three connection modes: Wi-Fi connection (easy to operate on the app page), computer operation (diverse creation of pictures and text), offline engraving (cloud storage and memory function, please external connection, one-key repeat engraving), the engraving machine matches professional applications.9. Due to its innovative track and bottom hollow design, any object can be placed and the maximum engraving area is 80x80mm, which can meet daily needs10. Hidden circuit design

Read more less

1. Microphone: digital silicon mark 2. Input voltage: 5V 3. Microphone battery: 60MAH 4. Charging compartment battery: 300MAH 5. Signal-to-noise ratio: 64DBM 3-step noise reduction 6. Transmission delay: 30MS 7. Sensitivity: -42DB 8. Frequency response range: 20-20KHZ 9. Transmission distance: barrier-free 20m-30m

Read more less

1. Product Name:Wireless Lavalier Microphone2. Item model number:K93. Directivity:360 degree omnidirectional4. Sensitivity:-40db5. Signal-to-noise ratio:-65db6. Transmission distance:20 meters7. Charging time:about 90min

Read more less

1. Rated power: 3W2. Product size: 16.7 x 16.7 x 16.5cm3. Engraving area: 80 x 80mm4. Support system: for Windows/MAC/IOS/Android5. Support format: JPEG/JPG/PNG/BMP6. With a laser module, it can cut 0.2mm paper, wood, and leather, bringing you the fun of creating7. The detachable design can be used in many ways, and the engraving movement can be observed at any time without the need of goggles when the lens is installed, and there is no pressure to watch with the naked eye!8. Three connection modes: Wi-Fi connection (easy to operate on the app page), computer operation (diverse creation of pictures and text), offline engraving (cloud storage and memory function, please external connection, one-key repeat engraving), the engraving machine matches professional applications.9. Due to its innovative track and bottom hollow design, any object can be placed and the maximum engraving area is 80x80mm, which can meet daily needs10. Hidden circuit design

Read more less

1. Rated power: 3W2. Product size: 16.7 x 16.7 x 16.5cm3. Engraving area: 80 x 80mm4. Support system: for Windows/MAC/IOS/Android5. Support format: JPEG/JPG/PNG/BMP6. With a laser module, it can cut 0.2mm paper, wood, and leather, bringing you the fun of creating7. The detachable design can be used in many ways, and the engraving movement can be observed at any time without the need of goggles when the lens is installed, and there is no pressure to watch with the naked eye!8. Three connection modes: Wi-Fi connection (easy to operate on the app page), computer operation (diverse creation of pictures and text), offline engraving (cloud storage and memory function, please external connection, one-key repeat engraving), the engraving machine matches professional applications.9. Due to its innovative track and bottom hollow design, any object can be placed and the maximum engraving area is 80x80mm, which can meet daily needs10. Hidden circuit design

Read more less

Feature:1.The use of DSP sound field processing makes it support sound change to meet your entertainment needs. The microphone pickup is newly upgraded, and the voice is loud and not distorted.2.The reason why it offers you highly clear sound quality and stereo surround to ensure a more pleasant music experience is that it has built-in magnetic dual speakers with diaphragms.3.It is made of high-quality ABS material, which is lightweight and durable.4.Gold-plated larger area. Good looking. Special and nice appearance design.5.It is suitable for home, KTV, singing, etc. And it supports dual microphone interconnection, which can connect to the same mobile phone and sing the same song to achieve duet.Specification：1.Material: ABS2.Bluetoothc-compatible: 5.03.Effective Distance: 10 Meters4.Battery Capacity: 1800mAh (Included)5.Battery life: 5H6.Charging time: 3H7.Frequency Response Range: 100HZ-20000HZ8.Speaker power: 4Ω 5W9.Power Supply Voltage: DC 5V10.Endurance: 6 Hours11.Product size: 40 x 64 x 214mm12.Packing size: 82*82*225MM13.Weight: 410 (approx.)Packing list:Microphone x 1Charging Cable x 1Instructions x 1

Read more less

Feature:1.The use of DSP sound field processing makes it support sound change to meet your entertainment needs. The microphone pickup is newly upgraded, and the voice is loud and not distorted.2.The reason why it offers you highly clear sound quality and stereo surround to ensure a more pleasant music experience is that it has built-in magnetic dual speakers with diaphragms.3.It is made of high-quality ABS material, which is lightweight and durable.4.Gold-plated larger area. Good looking. Special and nice appearance design.5.It is suitable for home, KTV, singing, etc. And it supports dual microphone interconnection, which can connect to the same mobile phone and sing the same song to achieve duet.Specification：1.Material: ABS2.Bluetoothc-compatible: 5.03.Effective Distance: 10 Meters4.Battery Capacity: 1800mAh (Included)5.Battery life: 5H6.Charging time: 3H7.Frequency Response Range: 100HZ-20000HZ8.Speaker power: 4Ω 5W9.Power Supply Voltage: DC 5V10.Endurance: 6 Hours11.Product size: 40 x 64 x 214mm12.Packing size: 82*82*225MM13.Weight: 410 (approx.)Packing list:Microphone x 1Charging Cable x 1Instructions x 1

Read more less

1. Safe and stable support, quick disassembly and assembly, fully compatible2. Easy to use and easy to fold and store3. CMA forged, anodized4. Double plastic strip reinforcement, strong stability5. Plate buckle type locking, strong locking ability and fast operation6. Suitable for micro single, mobile phone clip, fill light, tablet clip, microphone clip, etc.7. ABS material has strong toughness, safe, non-toxic and harmless, and the bracket supports the three-pronged node8. Number of pin sections: 4 sections9. Material: aluminum alloy + nylon PA6610. Weight: 2-5kg11. Pipe diameter: 17-26mm12. Note: The product only contains the bracket, no other13. Storage height: 49-189cm14. Weight: 660g

Read more less

1. All copper material, tight socket, durable2. Light weight, small size, easy to store3. The plug pins can be adapted to UK sockets, and the socket jacks can be adapted to plugs from many countries4. Current: 10A5. Voltage: 250V6. Withstand power: 2200W7. Size: about 3.5x 3.5 x 2.6cm8. Weight: about 33g

Read more less

1. Safe and stable support, quick disassembly and assembly, fully compatible2. Easy to use and easy to fold and store3. CMA forged, anodized4. Double plastic strip reinforcement, strong stability5. Plate buckle type locking, strong locking ability and fast operation6. Suitable for micro single, mobile phone clip, fill light, tablet clip, microphone clip, etc.7. ABS material has strong toughness, safe, non-toxic and harmless, and the bracket supports the three-pronged node8. Number of pin sections: 4 sections9. Material: aluminum alloy + nylon PA6610. Weight: 2-5kg11. Pipe diameter: 17-26mm12. Note: The product only contains the bracket, no other13. Storage height: 49-189cm14. Weight: 660g

Read more less

1. Multi-purpose aircraft, live broadcast, selfie, video recording2. Integrated mobile phone Bluetooth device, quick pick and place, multi-function use, anti-lost design3. Easy to carry, convenient storage design4. The angle can be adjusted freely, and the height of the bracket can also be adjusted5. Traction triangle design, stable support, no shaking, auxiliary design center axle lock6. Material: aluminum alloy + ABS7. Bluetooth remote control power supply mode: built-in button battery8. Standard product: bracket + bluetooth remote control + mobile phone clip9. Telescopic height: ZP100: 330x1420mm, ZP100B: 435x1626mm10. Weight: ZP100: 420g, ZP100B: 530g11. Note: The product only contains the bracket, no other

Read more less

1. Input: DC 5V 1-2A2. Output: 4.2V 1A3. Power supply mode: USB direct plug4. Compatible battery models: 10440, 14500, 16340, 16650, 14650, 18350, 18500, 186505. Size: about 12 x 9 x 3cm6. Weight: about 106g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Slot design, can charge a variety of batteries, fasten the card position to avoid poor contact, convenient and effective2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Smart chip technology, overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge protection6. 5V USB power supply, average speed current limiting design

Read more less

1. All copper material, tight socket, durable2. Light weight, small size, easy to store3. The plug pins can be adapted to UK sockets, and the socket jacks can be adapted to plugs from many countries4. Current: 10A5. Voltage: 250V6. Withstand power: 2200W7. Size: about 3.5x 3.5 x 2.6cm8. Weight: about 33g

Read more less

1. One-piece phosphor bronze insert, anti-wear and durable2. Light weight, small size, easy to store and carry3. ABS material, wear-resistant and durable4. Multi-function jack, multi-national plug standard can be inserted for use5. Current: 10A6. Voltage: 250V7. Power: 2500W8. Material: ABS, copper

Read more less

1. Hold a tripod without fear of shaking, to meet the needs of photography blockbusters 2. Enhanced stability, reduced load rate, wide camera compatibility 3. Disassemble the single leg, designed for more convenience 4. The center axis is inverted, designed for instant macro 5. Damping table, easy to operate and more stable 6. 360 degree panoramic shooting, professional damping spherical panorama head 7. Aluminum alloy foot tube, high density, light weight, hard oxidation on the surface, scratch-resistant, wear-resistant and anti-corrosion 8. Metal oxide gimbal bearing, standard screw interface, anodized, fine texture and wear-resistant 9. Double level design, more accurate photography positioning 10. Tripod angle adjustment buckle, multi-angle adjustment at will 11. High strength, strong support and good stability 12. Foot tube knob locking system, metal locking knob, stronger locking force 13. Sphere diameter: 30mm 14. Bottom port of gimbal: 3/8 inch 15. Camera interface: 1/4 inch 16. Number of sections: 4 sections 17. Pipe diameter: 13mm 18. Load bearing: 6-10kg 19. Material: aluminum magnesium alloy 20. Packing list: tools + waist bag + tripod bag + manual 21. Size: 11.5x11.5x36cm 22. Weight: about 1250g 23. Note: The product only contains brackets, no other

Read more less

Feature1. Rechargeable cooling fan with 5200mAh large battery. 2. Stepless rotation to switch and adjust the wind speed. 3. Digital power display to operate product conveniently. 4. Low noise 26 decibels not disturb the sleep and work. 5. LED lighting,three gears brightness adjustable in needs. 6. Lightweight and portable,easily carried to many places. 7. Bottom hanging hook,can be used as camping ceiling fan. 8. Four speeds wind adjusted,satisfy different cooling needs.Parameter1. Input voltage: 5V 2. Output power: 1W-6W 3. Charging time: 4-5 hours 4. Battery capacity: 5200mAh 5. Charging interface: Type-C

Read more less

1. Material: Silicone2. Function: waterproof, anti-drop, anti-vibration3. Made of environmentally friendly silicone material, skin-friendly, non-toxic and tasteless4. Precise hole position, does not hinder the use and charging of the remote control5. The edge is thickened and heightened to protect the remote control in all directions6. Multimedia icon design on the back, practical and interesting7. Dimensions: 14.06 x 4 x 1.4 cm8. Weight: about 25 grams9. Note: Only the protective cover is sent for delivery, no other!

Read more less

1. Material: Silicone2. Function: waterproof, anti-drop, anti-vibration3. Made of environmentally friendly silicone material, skin-friendly, non-toxic and tasteless4. Precise hole position, does not hinder the use and charging of the remote control5. The edge is thickened and heightened to protect the remote control in all directions6. Multimedia icon design on the back, practical and interesting7. Dimensions: 14.06 x 4 x 1.4 cm8. Weight: about 25 grams9. Note: Only the protective cover is sent for delivery, no other!

Read more less

1. Material: Silicone2. Function: waterproof, anti-drop, anti-vibration3. Made of environmentally friendly silicone material, skin-friendly, non-toxic and tasteless4. Precise hole position, does not hinder the use and charging of the remote control5. The edge is thickened and heightened to protect the remote control in all directions6. Multimedia icon design on the back, practical and interesting7. Dimensions: 14.06 x 4 x 1.4 cm8. Weight: about 25 grams9. Note: Only the protective cover is sent for delivery, no other!

Read more less

1. Material: Silicone2. Function: waterproof, anti-drop, anti-vibration3. Made of environmentally friendly silicone material, skin-friendly, non-toxic and tasteless4. Precise hole position, does not hinder the use and charging of the remote control5. The edge is thickened and heightened to protect the remote control in all directions6. Multimedia icon design on the back, practical and interesting7. Dimensions: 14.06 x 4 x 1.4 cm8. Weight: about 25 grams9. Note: Only the protective cover is sent for delivery, no other!

Read more less

Feature1. Rechargeable cooling fan with 5200mAh large battery. 2. Stepless rotation to switch and adjust the wind speed. 3. Digital power display to operate product conveniently. 4. Low noise 26 decibels not disturb the sleep and work. 5. LED lighting,three gears brightness adjustable in needs. 6. Lightweight and portable,easily carried to many places. 7. Bottom hanging hook,can be used as camping ceiling fan. 8. Four speeds wind adjusted,satisfy different cooling needs.Parameter1. Input voltage: 5V 2. Output power: 1W-6W 3. Charging time: 4-5 hours 4. Battery capacity: 5200mAh 5. Charging interface: Type-C

Read more less

1. Simple installation and easy cleaning2. Suitable for Shark P3/P5/P8/T8/S3973/S5003D3. High water absorption, strong decontamination4. Long life, easy to clean, no lint5. Use environment: home6. Steam mop machine furniture floor cleaning7. Size: 35x35cm8. Weight: 135g

Read more less

1. Material: paper2. Suitable for Karcher Kacher MV2 / WD2.000 / WD2.399 / A2000 / A2099 WD2.250 / A2004 / A20543. Wear-resistant and durable, not easy to damage4. Two-layer composite filtration special material, the dust collection and filtration effect is more significant5. Simple installation and easy cleaning6. Size: 24 x 24cm7. Weight: about 50g

Read more less

1. Simple installation and easy cleaning2. Suitable for Karcher A2004 / A22043. Wear-resistant and durable, not easy to damage4. Function: filter particles5. Use environment: home6. Applicable area: 50-100 square meters7. Size: 12x11cm8. Weight: 156g

Read more less

1. Simple installation and easy cleaning2. Suitable for Shark S1000/S1000A/S1000C/S1000WM/S1001C etc.3. High water absorption, strong decontamination4. Long life, easy to clean, no lint5. Use environment: home6. Steam mop machine furniture floor cleaning7. Size: 31x17.5cm8. Weight: 56g

Read more less

1. Simple installation and easy cleaning2. Suitable for Shark P3 / P5 / P8 / T8 3. High water absorption, strong decontamination4. Long life, easy to clean, no lint5. Use environment: home6. Steam mop machine furniture floor cleaning7. Material: fiber8. Size: 26.5 x 22cm9. Weight: about 45g

Read more less

1. Zinc alloy XLR head, and the plug is nickel-plated2. Its conductor is bare copper wire, PVC sheath Nickel-plated plug3. Product use: suitable for mixers, power amplifiers, active speakers, microphones and other equipment.4. This adapter converts the audio output of the XLR end into dual RCA output. It cannot combine dual RCA audio signals into XLR audio signals. Please pay attention to the direction of use.5. Length: about 20cm (including plug)

Read more less

1. Material: ABS, electronic components2. Function: photo, video, continuous shooting, playback, filter3. Features: thermal printing, high-definition large screen, built-in various stickers4. Display: 2.4 inches5. Photo resolution: 1200W display pixels6. Video resolution: 1920 x 10807. Battery: 1000mAh lithium battery8. Charging time: 3.5 hours9. Working hours: 4.5 hours10. Three levels of printing density, freely adjustable11. Built-in 12 million pixel high-definition camera, take pictures more clearly12. Built-in a variety of stickers, cute and funny13. Product size: 9.7 x 7.9 x 4.7 cm14. Product weight: about 189 gramsPacking List:-Print camera x 1-Print roll paper x 1-Data cable x 1-Instruction manual x 1

Read more less

1. Metal plating shell, effectively shielding external interference, sturdy and durable2. Balanced connection, use condenser microphone to support 48V phantom power supply3. Double-layer shielded wire, high-fidelity transmission, effective noise reduction4. Product use: mobile phone, computer, live sound card, mixer, etc. to transfer the XLR microphone interface.5. Product length: 30cm

Read more less

1. Material: flame retardant ABS, electronic components2. Heating method: PTC ceramic heater3. Features: internal temperature control protection, flame retardant body, no light heating, multiple protection, large-angle air supply4. Safety protection: overheating power off, flame retardant material, dumping power off, overload protection, short circuit protection, anti-scalding grille5. Applicable area: about 20 square meters6. Rated voltage: 220-240V7. Rated frequency: 50Hz8. Rated power: 500W9. Operation mode: mechanical10. Air supply method: shaking his head11. Low noise operation, more comfortable to use12. Natural and comfortable, as warm as the sun13. No light and heat do not hurt the eyes, do not disturb the sleep of the family14. Product size: 26.2 x 10.3 x 11 cm

Read more less

1. Material: flame retardant plastic, electronic components2. Heating method: PTC ceramic heater3. Safety protection: overheating power off, flame retardant material, dumping power off, anti-scalding grille4. Applicable area: 15-50 square meters5. Speed adjustment gear: third gear6. Remote control timing: 4-12 hours7. Rated voltage: 220-240V8. Rated frequency: 50Hz9. Power: 5W/750W/1500W10. Switch Type: Mechanical/Touch11. Air supply method: shaking his head12. Touch screen remote control battery: CR2025 button battery x 2 (delivery with battery)13. Real-time temperature display, touch key design, more convenient to use14. Low noise operation, more comfortable to use15. Natural and comfortable, as warm as the sun16. No light and heat do not hurt the eyes, do not disturb the sleep of the family17. Product size: 40.7 x 18.6 x 12.6 cm

Read more less

1. Material: flame retardant plastic, electronic components2. Heating method: PTC ceramic heater3. Safety protection: overheating power off, flame retardant material, dumping power off, anti-scalding grille4. Applicable area: 15-50 square meters5. Speed adjustment gear: third gear6. Remote control timing: 4-12 hours7. Rated voltage: 220-240V8. Rated frequency: 50Hz9. Power: 5W/750W/1500W10. Switch Type: Mechanical/Touch11. Air supply method: shaking his head12. Touch screen remote control battery: CR2025 button battery x 2 (delivery with battery)13. Real-time temperature display, touch key design, more convenient to use14. Low noise operation, more comfortable to use15. Natural and comfortable, as warm as the sun16. No light and heat do not hurt the eyes, do not disturb the sleep of the family17. Product size: 40.7 x 18.6 x 12.6 cm

Read more less

1. Brand new high quality. 2. Light weight, easy to carry. 3. US Plug EU Plug adapter, safe to use. 4. Convenient for travel and daily use. 5. Suitable for the following plugs: UK, Australia, US, EU plugs.

Read more less

1. Material: flame retardant plastic, electronic components2. Heating method: PTC ceramic heater3. Safety protection: overheating power off, flame retardant material, dumping power off, anti-scalding grille4. Applicable area: 15-50 square meters5. Speed adjustment gear: third gear6. Remote control timing: 4-12 hours7. Rated voltage: 220-240V8. Rated frequency: 50Hz9. Power: 5W/750W/1500W10. Switch Type: Mechanical/Touch11. Air supply method: shaking his head12. Touch screen remote control battery: CR2025 button battery x 2 (delivery with battery)13. Real-time temperature display, touch key design, more convenient to use14. Low noise operation, more comfortable to use15. Natural and comfortable, as warm as the sun16. No light and heat do not hurt the eyes, do not disturb the sleep of the family17. Product size: 40.7 x 18.6 x 12.6 cm

Read more less

1. Material: ABS, electronic components2. Function: photo, video, continuous shooting, playback, filter3. Features: thermal printing, high-definition large screen, built-in various stickers4. Display: 2.4 inches5. Photo resolution: 1200W display pixels6. Video resolution: 1920 x 10807. Battery: 1000mAh lithium battery8. Charging time: 3.5 hours9. Working hours: 4.5 hours10. Three levels of printing density, freely adjustable11. Built-in 12 million pixel high-definition camera, take pictures more clearly12. Built-in a variety of stickers, cute and funny13. Product size: 9.7 x 7.9 x 4.7 cm14. Product weight: about 189 gramsPacking List:-Print camera x 1-Print roll paper x 1-Data cable x 1-Instruction manual x 1

Read more less