Black Friday Week at Garmade ENDS SOON!

Save up to 25%! Don't miss out—check it out now!

Dec 03, 2024 11:59:59

  • For orders below 150€a 5% discount will be automatically applied.
  • For orders between 150€ and 250€a 10% discount will be automatically applied.
  • For orders between 250€ and 500€, a 15% discount will be automatically applied.
  • For orders between 500€ and 1000€, a 20% discount will be automatically applied.
  • For orders of above 1000€, a 25% discount will be automatically applied.

Wintact WT8812 Compound Gas Monitor Detection Alarm

Description

1. Gas measurement: The sensor warms up when the countdown is started. The refresh rate is 1HZ. Do not charge during the measurement of combustible gas, otherwise it may explode.
2. High/low alarm: 4 default high/low alarms, 4 types of alarms, and the alarm sound can be turned off.
3. Data recording: 1000 pieces of data can be recorded. The default interval of data recording is 5 seconds, which can be set in inL of the setting mode. When the interval is set to 0 seconds, the data logging function fails. The delete operation will delete all recorded data.
4. Temperature display: set the unit to Celsius or Fahrenheit, the default unit is Celsius
5. Automatic shutdown: automatic shutdown without operation within 30 minutes. This feature is turned on by default.
6. Battery capacity: It is forbidden to start the unit to avoid measurement errors or explosion. If the battery is low, it may turn off automatically. Charging time: about 4 hours. Discharge time: about 8 hours.
7. Zero point calibration: It is recommended to calibrate the device at zero point or zero offset every month to ensure the high accuracy of the measurement (please ensure that the battery power is above 2bar) calibration, and place it in the air for a period of time after powering on. Make sure that the device body temperature is slightly higher than the ambient temperature.
8. Temperature compensation: the measured data is compensated within the range of -20 to 50 degrees Celsius
9. Software error: The machine crashes/shutdown indicates that an error occurred during the operation. If the software is forced to shut down, please press the on/off button to activate the device
10. Adopt high-quality gas sensor, safe and reliable, accurate measurement and stable performance.
11. It has excellent sensitivity and repeatability, is easy to use and maintain, and meets the requirements for high reliability of equipment in industrial field safety monitoring.
12. The shell is made of high-strength engineering plastics and composite non-slip rubber, dust-proof and explosion-proof, high strength, smooth hand feeling
13. Battery type: 3. 7V rechargeable lithium battery
14. LCD displays real-time data and system status
15. Response time (90%): less than 30 seconds
16. Size: 71x153x49mm
17. Weight: 218.7g

Wintact WT8812 Compound Gas Monitor Detection Alarm

Product form

SKU: HC5850

  • In stock (Processing Time 1 - 72 hours)

€112,26

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    1. Gas measurement: The sensor warms up when the countdown is started. The refresh rate is 1HZ. Do not charge during the measurement of combustible gas, otherwise it may explode.
    2. High/low alarm: 4 default high/low alarms, 4 types of alarms, and the alarm sound can be turned off.
    3. Data recording: 1000 pieces of data can be recorded. The default interval of data recording is 5 seconds, which can be set in inL of the setting mode. When the interval is set to 0 seconds, the data logging function fails. The delete operation will delete all recorded data.
    4. Temperature display: set the unit to Celsius or Fahrenheit, the default unit is Celsius
    5. Automatic shutdown: automatic shutdown without operation within 30 minutes. This feature is turned on by default.
    6. Battery capacity: It is forbidden to start the unit to avoid measurement errors or explosion. If the battery is low, it may turn off automatically. Charging time: about 4 hours. Discharge time: about 8 hours.
    7. Zero point calibration: It is recommended to calibrate the device at zero point or zero offset every month to ensure the high accuracy of the measurement (please ensure that the battery power is above 2bar) calibration, and place it in the air for a period of time after powering on. Make sure that the device body temperature is slightly higher than the ambient temperature.
    8. Temperature compensation: the measured data is compensated within the range of -20 to 50 degrees Celsius
    9. Software error: The machine crashes/shutdown indicates that an error occurred during the operation. If the software is forced to shut down, please press the on/off button to activate the device
    10. Adopt high-quality gas sensor, safe and reliable, accurate measurement and stable performance.
    11. It has excellent sensitivity and repeatability, is easy to use and maintain, and meets the requirements for high reliability of equipment in industrial field safety monitoring.
    12. The shell is made of high-strength engineering plastics and composite non-slip rubber, dust-proof and explosion-proof, high strength, smooth hand feeling
    13. Battery type: 3. 7V rechargeable lithium battery
    14. LCD displays real-time data and system status
    15. Response time (90%): less than 30 seconds
    16. Size: 71x153x49mm
    17. Weight: 218.7g

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account