DJI & GoPro Accessories

1. Compatible products: For DJI RS 2, RSC 2, RS 3, RS 3 Pro, RS 3 Mini 2. Use the elbow end to connect the camera. When the gimbal rotates, the camera control line and the gimbal will not interfere with each other, thus avoiding damage to the camera and control line 3. Specifications: Type-C / USB-C to Type-C / USB-C 4. Length: 30cm 5. Reminder: It is recommended to use the elbow end to connect the camera 6. Packing list: USB-C elbow control cable x 1

Read more less

1. 15mm equivalent focal length for a wider field of view 2. Magnetic connector design for easy removal and installation 3. Magnetic design for easy access and storage in a protective case 4. 110 degree FOV for DJI Pocket 2; 90 degree for Osmo Pocket 5. Fitted products: for DJI Pocket 2 / Osmo Pocket 6. Dimensions: 17.8x15.2x6.7 mm 7. Weight: 3.3g 8. Note: Product includes lens only, nothing else

Read more less

1. Powerful wireless radio system, which can achieve a wireless radio distance of up to 250 meters2. The transmitter can record, regardless of human voice, ambient sound or instrument sound, it can be recorded clearly, and it has built-in storage, which can be used as a recording pen alone, and can also back up the sound during recording to ensure the integrity of the recording data3. The charging box can quickly pair the receiver and the transmitter, and charge them in real time. It can also store some accessories in one piece. It is easy to carry and fully charged after opening the cover.4. The two transmitters can record at the same time, and have built-in storage, which can record independently, and you can use it as a recording pen; it also supports sound backup to ensure the integrity of the recording data to the greatest extent5. The transmitter adopts a clip-back design and is equipped with magnetic accessories, which can be easily fixed on clothes. The receiver can also be mounted on the cold shoe/hot shoe with the help of the hot shoe conversion plate, and the installation is very flexible6. The receiver supports USB-C, Lightning and 3.5mm TRS interface output, compatible with mainstream mobile phones, various cameras and computers7. Standard charging box (optional), with a sense of security, the charging box can charge the receiver and transmitter in real time, the battery life is up to 15 hours, and the creation is not limitedLauncher:1. Dimensions: Length 47.32mm, Width 30.43mm, Height 20.01mm2. Weight: 30g3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5.5 hoursReceiver:1. Dimensions: Length 47.44mm, Width 32.21mm, Height 17.35mm2. Weight: 24.9 grams3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5 hoursCharging case:1. Dimensions: Length 103.06mm, Width 61.87mm, Height 41.50mm2. Weight: 162.2 grams3. Battery type: LiPo 1S4. Battery capacity: 2600mAh5. Battery power: 10 Wh6. Battery voltage: 3.87 volts7. Charging time: 2 hours and 40 minutes8. Working time: 3 charges at the same time, about 1.8 times of charging9. General: microphone directivity10. Low cut off: 50 Hz to 20 kHz11. Low cut function on: 150 Hz to 20 kHz12. Sound pressure level (MAX): 114 dB SPL13. Input level (3.5mm): -17 dBV14. Equivalent noise: 23 dBA15. Output power (MAX): 22 mW@1 kHz, 32 Ω16. Transmission distance (MAX): 250 meters (FCC); 160 meters (CE) measured in an open outdoor environment without interference

Read more less

1. Installation method: quick release2. For DJI Ronin 4D3. Installed at the interface of the Ronin 4D control handle4. It can be used to transfer GPS modules and other accessories5. Solve the problem of horizontal skew of Ronin 4D during high-speed sports such as car shooting6. Weight: about 474 gramspacking list:- Control handle interface multi-function adapter x 1

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. Equipped with a NATO interface, it supports quick disassembly and assembly, and can hold the gimbal with both hands for shooting3. In the two-handed mode, the low-angle handheld mode can be quickly switched without disassembly, and different usage modes can be selected according to actual needs4. The left and right rails are equipped with 3/8'' threaded interface, 1/4''-20 threaded interface and cold shoe interface, which support the installation of accessories with corresponding interfaces5. After replacing the mechanical handle on one side with a control handle and connecting a short control cable, a series of operations such as sleep, video, joystick, and focus can be realized on the handlePacking list:- Left crossbar x 1- Right crossbar x 1- Handle grip x 2

Read more less

1. Material: aluminum alloy2. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 23. One-piece body design4. CNC processing, surface anodic anti-oxidation treatment5. Durable and convenientpacking list:Lower quick release plate x 1

Read more less

1. Double cold shoes, switch between horizontal and vertical shooting, quick release structure, all aluminum alloy2. Dual cooling shoes double the expansion, and can be connected with external microphones and flashlights3. The magnetic suction part at the bottom is hollowed out, which can be transferred to the original magnetic suction base, and the magnetic suction card slot is added on the side, and the second cuts vertical shooting4. Toggle the buckle to quickly disassemble, and close the side cover to lock automatically5. Made of aluminum alloy, anti-fall and wear-resistant, strong protection6. Open the mold of the real machine, avoid the empty charging port on the side, and cooperate with the charging selfie stick to realize charging and shooting at the same time7. The surface is sandblasted and oxidized to cope with various complex shooting environments8. Compatible models: Compatible with DJI Osmo Action 39. Precautions: Do not place it in a humid place for a long time, and do not squeeze it and drop it10. Note: The product only includes a protective frame, nothing else11. Material: aluminum alloy12. Size: 82.6x56.1x31.8mm13. Weight: 55g

Read more less

1. Compatible with most action cameras and mobile phones on the market2. Silicone collar designed to fit the neck better, comfortable to wear for a long time3. Magnetic quick release connector for quick disassembly and assembly of the camera4. Flexible silicone collar, the tough material is not easy to break5. Smart hanging neck button, one key to open, easy to operate6. Closed-loop hanging neck, stable and firm without falling off7. There is a silicone protective layer on the outside, which is soft and non-slip, and there is a stainless steel gooseneck + aluminum strip inside, which is not easy to break8. Applicable models: suitable for all kinds of sports cameras9. Multi-angle adjustment to meet the needs of various shooting angles10. One pull and use, simple design, easy to operate, quick to wear11. Material: Silicone12. Size: 180x130mm13. Weight: 170gProduct List:-1 x Halter bracket/screw rod-1 x Adapter-1 x Product manual-1 x Packing box

Read more less

1. Compatible with most action cameras and mobile phones on the market2. Silicone collar designed to fit the neck better, comfortable to wear for a long time3. Magnetic quick release connector for quick disassembly and assembly of the camera4. Flexible silicone collar, the tough material is not easy to break5. Smart hanging neck button, one key to open, easy to operate6. Closed-loop hanging neck, stable and firm without falling off7. There is a silicone protective layer on the outside, which is soft and non-slip, and there is a stainless steel gooseneck + aluminum strip inside, which is not easy to break8. Applicable models: suitable for all kinds of sports cameras9. Multi-angle adjustment to meet the needs of various shooting angles10. One pull and use, simple design, easy to operate, quick to wear11. Material: Silicone12. Size: 180x130mm13. Weight: 170gProduct List:-1 x Halter bracket/screw rod-1 x Adapter-1 x Product manual-1 x Packing box

Read more less

1. Compatible with DJI RS 3 Mini2. CNC finishing metal fixing ring, high strength, high hardness and durability3. Double hanging buckles ensure the balance of force at the joint and improve stability4. Soft and comfortable shoulder strap, decompression and breathable, quick release and quick assembly5. Big head metal hook, strong load-bearing capacity6. The length of the shoulder strap is adjustable, and the length range of folding in half: 55.5-76.5cm, suitable for users of different heights7. The inner wall of the fixed ring is non-slip soft pad, soft and scratch-resistant, increasing friction to lock the body firmly8. Soft and breathable, thick mesh fabric inside9. Tough and durable, tight nylon webbing10. High-strength tensile, precision stitching + hemming11. Load bearing: 2-5 kg12. Material: cloth + nylon webbing + leather + metal13. Size: 14x8x6cm14. Net weight: 177g (including fixing ring)15. Gross weight: 202gPacking list:-1 x wrench-1 x shoulder strap-1 x retaining ring-2 x screws

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Wear-resistant ABS glossy material, durable2. One PC is long and the other is short, it can be used as an extension rod, and can also adjust the direction of the machine up, down, left, and right3. Material: plastic + metal4. Applicable models: Universal action camera accessories5. Scope of application: bicycle clips, chest straps, vigorous clips, suction cups and many other sports machine accessories6. Dimensions: same direction short adapter: 3.6x2.4x1.5cm, same direction long adapter: 5x2.4x1.5cm, different direction short adapter: 3.5x2.4x1.5cm, different direction long adapter: 5x2. 4x1.5cm, AEE adapter: 3.7x2x0.3cm7. Weight: short adapter: about 5.5g, long adapter: about 8g, AEE adapter: about 10g

Read more less

1. Translucent design, easy to observe the protection status of the gimbal2. Fit the fuselage design, stable and not loose3. Provide multi-directional protection for the lens to prevent foreign objects from colliding and dust4. Fix the head, protect the lens from being scratched at all times during transportation, and prolong the service life of the machine5. For DJI MINI 36. Note: The product only includes the lens protection cover, and does not include other items of the drone7. Material: plastic

Read more less

1. Install and uninstall your device quickly and easily2. Applicable models: suitable for sports cameras/mobile phones3. Material: aluminum alloy4. Note: The product only includes the bracket, nothing else5. Size: 190x170x45mm

Read more less

1. The unique two-in-one design is not only a protective cover, but also a hood. Two-stage shading, free viewing angle2. Effectively protect the screen, buttons, joystick3. One button to close, avoiding repeated disassembly and assembly of the joystick4. Equipped with lifting eye screws, it is convenient to use the lanyard while locking the protective cover5. It fits the shape of RC PRO, effectively prevents the screen from being squeezed and scratched, and prevents accidental button touches6. Precisely cut holes, do not block the buttons and indicators, and do not affect the touch screen7. Compatible products: DJI RC Pro / Mavic 3 Classic / Mavic 3 / Mavic 3 Cine / Mini 3 Pro / Air 2S8. Material: plastic9. Net weight: 93g10. Gross weight: 138g

Read more less

1. Storage function, impact resistance, waterproof and dustproof, semi-opening design2. Sturdy protection, drop resistance and compression resistance, the hard layer is made of EVA material, which reduces the impact strength of objects such as extrusion and dropping3. The real machine is molded, the size is adapted, and the lens space is reserved to effectively protect the lens part4. Half-open zipper design, without removing the tripod and other accessories, it can be opened and used immediately5. PU outer layer, rainproof and dustproof6. Compatible design, bare metal and after installing the rabbit cage two state interface use7. Soft and scratch-free, the inner lining is made of velvet material to prevent the lens and screen from being scratched8. Portable, small and convenient, light travel9. Compatible models: for DJI Osmo Action 310. Material: PU, EVA, velvet11. Weight: 36.8g12. Size: 10.1x7x4.25cmPrecautions:1. The product needs to be stored in a cool, ventilated and dry place, and the storage temperature should not be higher than 40 degrees2. Do not touch the source3. Do not soak in water, please air dry as soon as possible after soaking in water

Read more less

1. The large-capacity suit bag can store gimbal, tripod, quick release plate, MIC charging box, MIC receiver and transmitter, as well as data cables, mobile phone connectors, Mic windproof fleece and other small accessories2. Precise mold opening, stable storage of machines and accessories, shock absorption and drop resistance, meticulous care3. It can be carried on one shoulder, and the length of the shoulder strap can be adjusted freely4. Reasonable partition, a full set of storage5. The shock-absorbing and pressure-resistant shell can effectively relieve external impact and provide effective protection for the fuselage6. The liner is made of soft fabric to prevent scratches7. Exquisite and smooth zipper, rigorous stitching8. Durable handle, easy to carry without tired hands9. Applicable models: suitable for DJI RS 3 Mini10. Material: fabric + fabric lining11. Dimensions: 310 x 226 x 108mm12. Net weight: 653g13. Gross weight: 759g

Read more less

1. Practical and large capacity. It can store gimbal, tripod, charger, MIC charging box, MIC receiver and transmitter, camera, portable transfer handle, and small accessories such as quick release plate, data cable, mobile phone connector, Mic windproof holster2. Professional waterproof, the safety box is tightly closed and sealed, which can effectively prevent water seepage and leakage when splashing or sprinkling water3. High-strength, drop-resistant, compressive, corrosion-resistant, high and low temperature resistant4. Super impact-resistant hard material is used, which is resistant to falling and smashing, not easy to deform, and has a strong load-bearing capacity5. Shockproof inner support, precise mold opening, tight storage and protection of your equipment6. Comfortable soft rubber handle, comfortable hand feeling, non-slip and wear-resistant, relieve hand pressure7. Double insurance safety lock, wear-resistant and durable, bold and thick, durable8. The gas balance valve balances the air pressure inside and outside the body, avoiding the phenomenon of failure to open or collapse caused by high altitude or temperature9. High-density elastic egg cotton, soft and fit shock-absorbing protection, effectively protect the machine and accessories10. 304 stainless steel chain, high strength, corrosion resistance, wear resistance11. Box reinforcement ribs increase the strength of the box, making it more compressive and wear-resistant, so that the box can be placed stably12. Applicable models: suitable for DJI RS3 Mini13. Note: The product only includes the storage bag, nothing else14. Material: ABS+EVA15. Size: 35.4 x 29.4 x 13.7cm16. Net weight: 1.5kg17. Gross weight: 1.75kg

Read more less

1. For Mini 3 / Mini 3 Pro / Mini 2 SE / Mini 2 / Mini SE / Mavic Mini2. Tailor-made, stable support, fits the bottom structure of Mini series drones, it is stable and not easy to fall off when placed lightly3. Intuitive display angle, better display of aircraft shape, can be expanded or folded for display4. Low center of gravity and stable support, no shaking or tipping5. Note: The product only includes the bracket, nothing else6. Material: plastic7. Net weight: 27g8. Gross weight: 36g

Read more less

Features1. Unlock the POV angle of view: The first-person perspective neck neck shooting has a stronger sense of substitution than handheld shooting, and it is close to the eyes, bringing you more shocking visual effects. 2. Built-in 8 high-strength magnets, strong adsorption, sports photography is not afraid of bumps. 3. Small displacement is automatically corrected, and the adsorption is not misplaced to maintain the positive direction. 4. "Invisible" magnetic design: Invisible wearing under clothing, docile fit without shaking, quick magnetic disassembly. 5. Unlimited viewing angle: Easily switch between horizontal and vertical screens; you can also flip the camera up and down to adjust the shooting angle arbitrarily. 6. Wide range of applications: can be used in a variety of sports cameras, such as for GoPro series, Osmo Action series, Insta360 series, Feimi FIMI series...Specifications1. Model: ZJ554 2. Material: Magnet, plastic, lanyard 3. Net weight: 73g

Read more less

Features1. High-toughness material, which can effectively cushion the impact force. 2. Multi-arch structure, anti-collision and impact resistance, anti-collision upgrade is safer. 3. Connected end to end, stable and anti-shake. The front and rear rings are connected and integrated to reduce resonance and make it more stable. 4. Isolate the blades, protect the propellers, and prevent the propellers from scratching people or objects to a large extent. 5. It can be used with Sunnylife LG551 spider tripod.Specifications1. Model: MM3-KC559 2. Applicable models: Suitable for DJI Mini 3 3. Material: Plastic 4. Net weight: 47g

Read more less

1. Carbon fiber material, light weight, high hardness, high aerodynamic efficiency;2. The blades have passed the dynamic balance test, with low power consumption and strong battery life;3. Precise mold opening, easy alignment of screw holes, and easy installation.4. Applicable models: suitable for DJI Mini 3 (not applicable for Mini 3 Pro)5. Main material: carbon fiber6. Net weight: 15.3g7. Size: 7.6 x 1.7cmPacking list:Propellers (pair) x 2Screw × 10Screwdriver × 1

Read more less

1. The real machine opens the mold, effectively fixes the front and rear propellers, protects the propellers in the folded storage state, and prevents them from being damaged when they are put into the backpack;2. It will not squeeze and damage the propeller, and at the same time, it can fix the propeller during storage, so that it is not easy to shake and cross;3. Reasonably fix the propeller to fit the fuselage without affecting the use of the lens cap;4. Half-wrapped chassis design, the base can wrap the motor at the bottom of the drone when storing, preventing debris from entering the motor;5. The paddle has two holes to adjust the tightness, which is easy to install and remove.6. Main material: Silicone+ABS7. Net weight: 15.8g8. Product size: 8.9 x 7.8 x 6.1cmPacking list: beam paddle base x 1

Read more less

1. The real machine opens the mold, effectively fixes the front and rear propellers, protects the propellers in the folded storage state, and prevents them from being damaged when they are put into the backpack;2. It will not squeeze and damage the propeller, and at the same time, it can fix the propeller during storage, so that it is not easy to shake and cross;3. Reasonably fix the propeller to fit the fuselage without affecting the use of the lens cap;4. Half-wrapped chassis design, the base can wrap the motor at the bottom of the drone when storing, preventing debris from entering the motor;5. The paddle has two holes to adjust the tightness, which is easy to install and remove.6. Main material: Silicone+ABS7. Net weight: 15.8g8. Product size: 8.9 x 7.8 x 6.1cmPacking list: beam paddle base x 1

Read more less

1. For GoPro Hero11 Black / HERO10 Black /HERO9 Black2. Support shooting while charging, rain and snow proof, quick disassembly and assembly3. The charging port is designed to prevent rain and snow steps, and is wrapped with a silicone sealing ring to effectively protect the device from bad weather.4. The device reserves a charging interface, which can be used with a charging selfie stick to achieve continuous shooting without changing the battery.5. Built-in Poron foam protects the battery, which can absorb the shock of the battery during intense exercise6. Material: ABS, silicone, stainless steel7. Dimensions: 49.5mm x 16mm x 17.8mm8. Weight: 5.22g

Read more less

1. CNC machining of aviation aluminum alloy, strong and durable 2. Anodized sandblasting and oxidation, comfortable to the touch, and the color is durable and does not fade 3. Double-leaf card slot to 1/4 card slot 4. The 1/4 screw can be fastened with a disc 5. For Insta360 ONE R / GOPRO HERO 9 Black / 8 Black / DJI Osmo Action and other photography equipment 6. Easy to install 7. Size: 25x32mm

Read more less

1. Easy to install 2. Adapter for GoPro centered vertical shooting, supports 360 degree rotation 3. Wear-resistant material, durable 4. Compatible with most sports cameras, backpack clips, collar holders, etc. on the market 5. Material: plastic 6. Size: 5.3x3.8x1.5cm

Read more less

1. Easy to install2. Hanging neck centered vertical camera adapter bracket3. Wear-resistant material, durable4. Applicable models: Universal action camera accessories5. Material: plastic + metal6. Size: 2.3x5.1x1.8cm

Read more less

1. Simple installation, easy to use 2. Short curved arm helmet mount extension 3. Wear-resistant material, durable 4. Compatible models: GoPro Hero 11 Black / 9 Black / 8 Black /7 Black / 6 Black / 5 Black/ 4 / 3+ / 3 / 2 / 1 / DJI Pocket Camera / OSMO Action other sports cameras 5. Material: PC 6. Length: 7.5cm 7. Weight: about 12g

Read more less

Features1. Specially designed for Insta360 X3 camera, the protective lens and the camera fit together tightly, and it is easy to attach a transparent armor to the lens for comprehensive protection; 2. Bare camera shooting effect, transparent lens protector, does not affect shooting; 3. High toughness material is used to effectively protect the lens from damage when the camera is dropped. 4. Made of high light transmission and corrosion resistance PC, lightweight and compact design adds little burden to your action camera 5. Anti-oil, anti-dust and anti-collision, it prevents your action camera lens from scratches and shocksPackage List1. X3 lens protective cover cover x 1 2. X3 lens protection lower cover x 1 3. Spare double-sided tape for X3 lens protection cover x 4 4. Cleaning cloth x 1 5. X3 lens protection cover pick x 1

Read more less

1. Made of canvas and soft EVA, durable and water-resistant. 2. With a hand strap and an adjustable strap, you can carry it as a handbag, shoulder bag or cross body bag, convenient to carry outdoor 3. Fine stitching lines and elegant appearance 4. Protect for DJI Mavic Mini 2 SE drone and portable charging station out of scratches and shock. 5. Double zipper design for easy access, easy to carry outdoor with hand strap. 6. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 7. Size: 30 x 22 x 8.5cm 8. Weight: 331g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 29 x 22 x 13cm 7. Weight: 513g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 21.5 x 29.5 x 10cm 7. Weight: 290g

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The internal is made by pearl cotton, protect your drone well 3. Can be hand-held, with anti-slip design handle 4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out 5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear 6. Size: 24x 19 x 9cm 7. Weight: 284g

Read more less

1. Unique 2-in-1 design, it is both a protective cover and a light hood 2. Reduce sunlight interference and screen glare 3. It can effectively protect the accessories of the joystick, screen and buttons of the remote control, prevent the screen from being squeezed and scratched, and prevent the buttons from being touched by mistake 4. Foldable design, easy to carry and store 5. Thumb screw design, easy to disassemble 6. Material: ABS 7. Size: 17.3 x 13.7 x 5.5cm 8. Weight: 81g

Read more less

1. High-strength nylon shell material, scratch-resistant and wear-resistant, with stripe design, more texture.2. Water-repellent, high density, no deformation, 360-degree all-round care3. Selected EPP material for automobile anti-collision cushioning, integrated processing and molding, no peculiar smell, and stronger.4. The electrophoretic alloy zipper can withstand tens of thousands of times of opening and pulling, which is more atmospheric5. It can store the body, remote control, 3 batteries (including the battery of the body), other accessories, etc.6. Size: 21.5 x 21.5 x 9cm7. Weight: about 477 grams

Read more less

1. high-quality nylon fabric, scratch-resistant and wear-resistant with beautiful design, more texture2. Selected high elasticity pearl cotton plus the surface EVA liner, integrated processing molding, odorless, more solid.3. Handle using ergonomic design, fit the palm, long time handheld is not easy to fatigue4. EVA and the combination of the good product cloth has the advantages of shock absorption and pressure reduction, good plasticity, strong collision force, etc., strong shock absorption performance5. Applicable models: for DJI OSMO Action 36. Size: 22 x 9 x 20cm7. Weight: about 420g

Read more less

1. The external silicone protective cover is effectively anti-drop, shock-resistant and scratch-resistant, reducing damage and making use and storage more worry-free, 2. The reinforced rib surface design can be kneaded at will without changing shape, 3. The surface is sprayed with touch oil, which is as moisturizing as baby skin, beautiful and comfortable, 4. The precise hole position and the remote controller are just right for integration, coordination and beauty, without affecting the flight control, 5. Flexible and elastic, easy to disassemble and install. 6. Applicable models: For DJI RC (For DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mini 3 Pro, DJI Mini 3, DJI Air 2S)

Read more less

Features1. Equipped with a hanging neck bracket, shooting has a stronger sense of substitution than handheld shooting, and it brings you visual shock when it is close to the eyes; 2. Outside the multi-angle bending, there is a silicone protective layer that is soft and non-slip, and there is a gooseneck inside. The gooseneck is soft and rigid, which is not easy to break; 3. With different extension connectors, three-way adjustment, up and down, left and right, front and rear adjustment; 4. Applicable to a variety of devices, shipped with a foldable mobile phone clip, 1/4 adapter, suitable for DJI Action 2/ OSMO Action /FIMI PALM 2 / FIMI PALM / GoPro HERO8/9/10/11/Insta360 ONE/ONE X/ONE X2/EVO and other cameras 5. Material: ABS+Silicone+AluminumPackage List1. Neck hanger x 1 2. Halter collar x 1 3. Phone holder x 1 4. Tripod adapter x 1 5. M5 screw x 3 6. Guide rod length x 1 7. Guide rod short x 1

Read more less

1. Compatible models: suitable for Insta360 X3 / ONE X22. It does not take up much space and only weighs 7g, making the microphone and camera fit closely.3. All aluminum alloy material, strong and durable.4. Combined with the charging audio adapter, it can realize the sound collection effect of the microphone in the panoramic mode.5. Note: This product does not include the selfie stick and microphone.

Read more less

1. Portable size, large capacity, and accessories can basically be placed2. Lycra + EVA hot-pressed inner support, real machine mold opening, smooth and does not hurt the fuselage3. Comfortable hand-feeling leather ball pattern PU, beautiful and beautiful water-repellent fabric, not afraid of traveling in light rainy days4. Thick and bold hanging buckle, no rust or paint, strong and durable5. The plated metal slider is beautiful and elegant, and the double slider design is convenient to use6. Applicable models: suitable for DJI MINI 3/MINI 3 PRO (two remote control versions are optional)7. Material: Shell PU+EVA, Liner Lycra+EVA8. Dimensions: about 26.7 x 26.7 x 10.2cm9. Weight: about 675g10. Storage bag only, excluding display items

Read more less

1. Cloth material shell, wear-resistant and scratch-resistant, easy to take care of2. Pressure-resistant, rain-proof and splash-proof, beautiful and generous3. Two-way smooth metal slider, easy to use4. Plastic handle, comfortable to carry, non-slip and sweat-proof5. Plush inner support, anti-scratch body6. Applicable models: suitable for DJI OSMO Mobile 67. Material: Nylon+EVA8. Dimensions: about 20 x 20 x 6.5cm9. Weight: about 420g10. Storage bag only, excluding display items

Read more less

1. Cloth material shell, wear-resistant and scratch-resistant, easy to take care of2. Pressure-resistant, rain-proof and splash-proof, beautiful and generous3. Two-way smooth metal slider, easy to use4. Plastic handle, comfortable to carry, non-slip and sweat-proof5. Plush inner support, anti-scratch body6. Applicable models: suitable for DJI OSMO Mobile 67. Material: Nylon+EVA8. Dimensions: about 20 x 20 x 6.5cm9. Weight: about 420g10. Storage bag only, excluding display items

Read more less

1. Made of aviation aluminum alloy material, CNC processing, lightweight and sturdy2. Real machine open holes, without blocking the buttons, battery compartment, pickup hole, and completely avoiding the buttons on the side, and not blocking any holes and buttons on the camera.3. The top with cold shoe mount, which can seamlessly connect the microphone, fill light, selfie stick, tripod, etc.4. Precise fitting, accurate fitting of the panoramic camera, easy installation, all-round fitting, and protection of the camera from damage5. No tools are required to disassemble and assemble with bare hands. The camera is directly placed from the top of the rabbit cage without any tools, and it is installed with bare hands without shaking6. Magnetic foldable base: Magnetic interface at the bottom, the bottom is designed with magnetic for GoPro interface, with a 1/4 interface in the middle, compatible with most tripods.

Read more less

1. Nylon shell is easy to maintain, two-way smooth metal slider is easy to use2. The inner elastic strap can secure the device and prevent it from falling3. The inner lining is made of flannelette, fit and care, anti-scratch and anti-scratch4. Capacity: can accommodate mobile phone gimbal, tripod, mobile phone clip, charging cable5. Applicable models: suitable for DJI OSMO Mobile 66. Material: nylon + EVA shell7. Dimensions: about 19 x 11 x 6.5cm8. Weight: about 180g

Read more less