Solar Power

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAh

Read more less

About the producct1. Brand new and high quality 2. Connects to solar panel to charge battery 3. Identify voltage level automatically 4. Adjustable charge / discharge parameters 5. Low voltage / overheat / overload / short-circuit / reverse polarity protection 6. Settable operatings modes of load 7. Dual USB output 8. Suitable for 12/24V lamps 9. LED display for better viewing 10. Connect battery first then solar panel or loadsSpecifications1. Max charge current: 20A 2. Max discharge current: 20A 3. Max solar panel input voltage: less or equal to 50V 4. Rate voltage: 12/24V auto work 5. Stop charging voltage: 14.7/29.4V 6. Low voltage recovery: 12.2/24.4V 7. Low voltage protection: 10.5/21V 8. USB output: 5V 2A 9. Operating temperature: -20 to 60 Celsius degree

Read more less

parameter:1. Rated voltage: 12/24V lead-acid battery voltage2. Maximum charge and discharge current: 30A3. Solar panel input voltage range: maximum 18V-450W/36V-900W4. Load working time setting: 1-24 hours adjustable5. Charging mode: PWM6. Overvoltage protection: 17V/34V7. Fully disconnected: 13.7V/27.4V8. Undervoltage disconnect: 10.5V/21V9. Over-discharge recovery voltage: 12.2V/24.4V10. Wiring specifications: less than or equal to No. 7 AWG (16 square millimeters)11. Working environment temperature: -25-55 degrees CelsiusFeatures:1. Vivid LCD graphic symbols2. Automatic recognition of system voltage level3. Automatic temperature compensation4. Settable load working mode5. Battery undervoltage protection6. Overload, short circuit protection7. Simple key operation8. Intelligent PWM charging method9. Adjustable charge and discharge control parameters10. Accumulation of charge and discharge ampere hours11. Battery reverse discharge protection12. Battery reverse connection protection

Read more less

1. High rotation speed, long service life2. Suitable for kitchens, greenhouses, pet houses, chicken coops, tree houses and trailers, while maintaining a comfortable temperature level3. Noise: below 36dB4. Output port: USB DC 5V5. Power supply: solar energy6. Switch type: single controller7. DC wire length: 150cm8. Solar panel power: 20W9. Solar operating voltage: 24V10. Solar cells: high efficiency of single crystal cells11. Solar panel size: 145x145mm12. The solar panel is laminated epoxy resin surface, waterproof IP65 can adapt to harsh outdoor environment, improve durability13. Solar vacuum cleaner powered by solar panels, equipped with standard USB voltage regulator to maintain output, can be used in the outdoor anytime, anywhere, convenient and fast14. The conversion efficiency is high, and external solar panels can effectively convert sunlight into electricity.15. The portable exhaust fan can effectively help you to keep the indoor air circulation, keep the air clean can help you eliminate the smell of pets, tobacco, etc.16. Packaging contents: Solar panel x1, exhaust fan x117. Weight: 230g18. Hood size: about 120x120mm

Read more less

1. Build your DIY-powered models / solar toys / solar displays. 2. High conversion rate. 3. High-efficiency output. 4. Excellent weak light effect. 5. Application: Science projects/Charging small DC batteries and so on. 6. Portable, small size, lightweight, sturdy and durable, good quality. 7. Power: 1.5W 8. Small attenuation, good reliability and long life.

Read more less

Features1. The charger utilizes natural sunlight to charge your device, It is a not too heavy to carry. 2. Adopt imported Sunpower solar panel, highly efficient sun power transformation, stability voltage panel, no need to worry damaging your phone. 3. The output port is USB, it can be used to charge smartphones, tablets, or any other 5V devices. 4. The tough PVC rainproof case and water tight solar panel is designed to survive in the wild with outdoor moisture and rain protection. 5. Compact size and lightweight foldable design, use on umbrella top, make it great for fishing by the lake, beach side play, street vendor.Specifications1. USB 1 output: 5V 2.5A 2. USB 2 output: 5V 3A / 9V 2A / 12V 1.5A, support DCP, QC 2.0, QC 3.0, MTK PE1.1/PE2.0, FCP, SCP, AFC, SFCP fast charge protocol 3. DC Max output: 13.2V 3A 4. Solar panel max power: 42W 5. Solar panel size: 26*12.6cm 6. Size: 87*87cm (unfold), 29*29*2cm (fold) 7. Weight: 1139g

Read more less

1. Multiple Protection: Compact panel with water-resistance, corrosion-resistance, high temperature treatment. 2. Humanized Design: Foldable design for portability, protective dust-free output interface and built-in pocket. 3. Dual USB Output+Type-C port 4. Built-in battery: Li-polymer 10000mAh 5. Peak Power: 5V 15W 6. Solar Conversion Rate: 22%-25% 7. Outputs: USB: 5V 3.0A(Max) Type-C: 5V 3.0A(Max) 8. Fold Size: 27 x 16 x 2cm 9. Unfolded Size: 63 x 27 x 1cm

Read more less

1. Stable performance: Built-in industrial microcontroller, stable operation in cold, high temperature and humid environment.2. The 12V/24V voltage can be automatically identified and intelligent, providing more convenience for your life.3. Large LCD display: to ensure simple and intuitive operation.4. Dual USB output: easily connect to the mobile phone, you can quickly and powerfully charge the mobile phone.5. Comprehensive protection: provide overcharge, overdischarge, overload protection and short circuit and reverse connection protection.6. A wide range of load work: easy to apply to different types of street lights and monitoring equipment.parameter:1. Rated charging current: 10A 20A 30A 40A 50A 60A2. Working temperature: -20-40 degrees Celsius3. Working voltage: 12V / 24V4. USB output: 5V 2A

Read more less

1. Stable performance: Built-in industrial microcontroller, stable operation in cold, high temperature and humid environment.2. The 12V/24V voltage can be automatically identified and intelligent, providing more convenience for your life.3. Large LCD display: to ensure simple and intuitive operation.4. Dual USB output: easily connect to the mobile phone, you can quickly and powerfully charge the mobile phone.5. Comprehensive protection: provide overcharge, overdischarge, overload protection and short circuit and reverse connection protection.6. A wide range of load work: easy to apply to different types of street lights and monitoring equipment.parameter:1. Rated charging current: 10A 20A 30A 40A 50A 60A2. Working temperature: -20-40 degrees Celsius3. Working voltage: 12V / 24V4. USB output: 5V 2A

Read more less

1. Stable performance: Built-in industrial microcontroller, stable operation in cold, high temperature and humid environment.2. The 12V/24V voltage can be automatically identified and intelligent, providing more convenience for your life.3. Large LCD display: to ensure simple and intuitive operation.4. Dual USB output: easily connect to the mobile phone, you can quickly and powerfully charge the mobile phone.5. Comprehensive protection: provide overcharge, overdischarge, overload protection and short circuit and reverse connection protection.6. A wide range of load work: easy to apply to different types of street lights and monitoring equipment.parameter:1. Rated charging current: 10A 20A 30A 40A 50A 60A2. Working temperature: -20-40 degrees Celsius3. Working voltage: 12V / 24V4. USB output: 5V 2A

Read more less

1. ABS plastic photovoltaic bracket is suitable for the installation of solar module panels in RVs and yachts, and can also be used for installation of photovoltaic modules on flat roofs2. Main features: high strength, anti-ultraviolet, high-frequency insulation performance, not affected by cold, heat and humidity, convenient installation and long life, etc.3. The black series is applied to the surface black or dark series models4. The white series is applied to the surface white or bright color series models5. No perforation, no damage to any installation surface6. Anti-ultraviolet, anti-UV agent is added to the product, it will not change color for a long time7. The product is installed with glue and has a beautiful appearance8. Dimensions: 113 x 93 x 43 mm

Read more less

1. ABS plastic photovoltaic bracket is suitable for the installation of solar module panels in RVs and yachts, and can also be used for installation of photovoltaic modules on flat roofs2. Main features: high strength, anti-ultraviolet, high-frequency insulation performance, not affected by cold, heat and humidity, convenient installation and long life, etc.3. The black series is applied to the surface black or dark series models4. The white series is applied to the surface white or bright color series models5. No perforation, no damage to any installation surface6. Anti-ultraviolet, anti-UV agent is added to the product, it will not change color for a long time7. The product is installed with glue and has a beautiful appearance8. Dimensions: 113 x 93 x 43 mm

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter size: about 16.5 x 11.2 x 5.6cm8. Package size: about 45 x 34 x 14cm9. Gross weight: about 1800g10. Description: the actual product is subject to the title specification and model, and the picture specification and model are for reference onlySolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter size: about 16.5 x 11.2 x 5.6cm8. Package size: about 45 x 34 x 14cm9. Gross weight: about 1800g10. Description: the actual product is subject to the title specification and model, and the picture specification and model are for reference onlySolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter size: about 16.5 x 11.2 x 5.6cm8. Package size: about 45 x 34 x 14cm9. Gross weight: about 1800g10. Description: the actual product is subject to the title specification and model, and the picture specification and model are for reference onlySolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter efficiency: about 90%8. Inverter size: about 20 x 11.2 x 5.6cm9. Package size: about 45 x 34 x 14cm10. Gross weight: about 1800gSolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter efficiency: about 90%8. Inverter size: about 20 x 11.2 x 5.6cm9. Package size: about 45 x 34 x 14cm10. Gross weight: about 1800gSolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter efficiency: about 90%8. Inverter size: about 20 x 11.2 x 5.6cm9. Package size: about 45 x 34 x 14cm10. Gross weight: about 1800gSolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter efficiency: about 90%8. Inverter size: about 20 x 11.2 x 5.6cm9. Package size: about 45 x 34 x 14cm10. Gross weight: about 1800gSolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

1. Output voltage waveform: square wave2. Input voltage range: 12V3. Output voltage: 110/220V4. Output frequency: 50/60HZ5. Output power: 300W6. Controller current: 30A7. Inverter size: about 16.5 x 11.2 x 5.6cm8. Package size: about 45 x 34 x 14cm9. Gross weight: about 1800g10. Description: the actual product is subject to the title specification and model, and the picture specification and model are for reference onlySolar panels:1. Power: 18W2. DC output: 12V/1.5A3. USB output: 5V/1.7A4. Material: aluminum substrate, PET5. Size: about 42 x 28cm6. Weight: about 450 gramsPacking list:- Inverter x1- Solar controller x1- Solar panel x1- Red and black battery clip x1 pair- Cigarette lighter x1- Manual x1- DC cable x1- DC alligator clip x1 pair

Read more less

Features1. Solar power panels use monocrystalline solar cells, which are much more efficient than ordinary solar cells. 2. Foldable design for more convenient carrying. 3. Equipped with voltage regulator, the voltage output is more stable and the charging is more secure. 4. Comfortable fabric, not afraid of the sun, not afraid of rain, charging without worry. 5. Connect directly to your device via the USB port. 6. Comes with a small pocket to keep the device safely stored during the charging process.Specifications1. Input voltage range: DC8-24V 2. Dimensions: 36 x 35.5 x 5cm fold; 110 x 36cm unfold DC interface 1. Output voltage: solar output voltage DC8-24V+/-0.4V 2. Protection: Anti-reverse charging protection (20A anti-reverse charging diode) 3. DC port specification: 5521 metal material USB1 interface (black): 1. Output voltage: 5.1v+/-0.2v 2. Output power: 15W 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: support iOS 2.1A, suitable for Samsung 2.0A DP=1.2V, DM=1.2V Support BC1.2 DP and DM short circuit 5. Conversion efficiency: greater than 85% USB2 interface (orange): 1. Output voltage: 5V-12V automatically adjusted according to the fast charging protocol 2. Output power: 18W (5V3A 9V2A 12V1.5A etc.) 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: support QC3.0/QC2.0 Qualcomm certificate number: 478786303-2 - Support QC3.0 Class A: 3.6v-12v (0.2v/step) - Support QC2.0 Class A: 5V 9V 12V - Support voltage configuration for Huawei FCP fast charge 5V 9V - Support voltage configuration for Samsung AFC fast charge 5V 9V - Support Spreadtrum SFCP fast charge 5V 9V 12V voltage configuration - Support iOS 2.4A: DP=2.7V, DM=2.7V - Support for Samsung 2.0A: DP=1.2V DM=1.2V 5. Conversion efficiency: greater than 85% TYPE-C interface 1. Output voltage: - 5V-3A is automatically adjusted according to the fast charging protocol - 9V-3A is automatically adjusted according to the fast charging protocol - 12V-3A is automatically adjusted according to the fast charging protocol - 15V-3A is automatically adjusted according to the fast charging protocol - 20V-3A is automatically adjusted according to the fast charging protocol - 13.2V-3.16A is automatically adjusted according to the fast charging protocol 2. Output power: 60W 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. The output has CV/CC characteristics (the output current is less than the set value, and the output CV mode; CC mode 4. Output charging protocol: - Works with iOS 2.4A - For Samsung 5V2A - DCP-1.5A - PPS/PD3.0/PD2.0 - QC3.0/QC2.0 - AFC - FCP - PE2.0/PE1.1 5. Conversion efficiency: greater than 94%

Read more less

1. Solar charging panel, energy saving and high efficiency2. Convenient and durable, low power consumption3. Solar power: 4W4. Solar panels: high-efficiency monocrystalline silicon5. Rated current: 600mA6. Working voltage: 5V7. Open circuit voltage: 6V8. Cable length: 3 meters9. Application: camera, doorbell10. Production process: PET lamination11. Charging port: Micor USB+Type-C /USB-C12. Dimensions: 175x120x9mm

Read more less

1. Solar charging panel, energy saving and high efficiency2. Convenient and durable, low power consumption3. Solar power: 4W4. Solar panels: high-efficiency monocrystalline silicon5. Rated current: 600mA6. Working voltage: 5V7. Open circuit voltage: 6V8. Cable length: 3 meters9. Application: camera, doorbell10. Production process: PET lamination11. Charging port: Micor USB+Type-C /USB-C12. Dimensions: 175x120x9mm

Read more less

1. High speed, long life2. Suitable for kitchens, pets, chicken coops, tree houses, etc.3. Noise: below 36dB4. Output port: DC55215. Power mode: solar energy6. Switch type: single control7. DC cable length: 150cm8. Solar panel power: 10W9. Solar working voltage: 12V10. Solar cells: monocrystalline cells with high performance11. Solar panel size: 360x180x3mm12. Fan power: 3W13. Fan speed: 2000r/min14. Fan air volume: 43.4CFM15. Fan size: 12x12cm

Read more less

1. High speed, long life2. Suitable for kitchens, pets, chicken coops, tree houses, etc.3. Noise: below 36dB4. Rated power: 3W5. Power mode: solar energy6. Switch type: single control7. DC cable length: 150cm8. Output port: DC55219. Solar working voltage: 12V10. Solar cells: monocrystalline cells with high performance11. Solar panel size: 150x150x3mm12. Fan power: 3W13. Fan speed: 2000r/min14. Fan air volume: 43.4CFM15. Fan size: 12x12cm

Read more less

Features1. Solar power panels use monocrystalline solar cells, which are much more efficient than ordinary solar cells. 2. Foldable design for more convenient carrying. 3. Equipped with voltage regulator, the voltage output is more stable and the charging is more secure. 4. Comfortable fabric, not afraid of the sun, not afraid of rain, charging without worry. 5. Connect directly to your device via the USB port. 6. Comes with a small pocket to keep the device safely stored during the charging process.Specifications1. Input voltage range: DC8-24V 2. Dimensions: 45.5 x 35.0 x 3cm fold; 70 x 45.5cm unfold DC interface 1. Output voltage: solar output voltage DC8-24V+/-0.4V 2. Protection: Anti-reverse charging protection (20A anti-reverse charging diode) 3. DC port specification: 5521 metal material USB1 interface (black): 1. Output voltage: 5.1V+/-0.2V 2. Output power: 15W 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: support iOS 2.1A, suitable for Samsung 2.0A DP=1.2V, DM=1.2V Support BC1.2 DP and DM short circuit 5. Conversion efficiency: greater than 85% USB2 interface (orange): 1. Output voltage: 5V-12V automatically adjusted according to the fast charging protocol 2. Output power: 18W (5V3A 9V2A 12V1.5A etc.) 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: - Support QC3.0/QC2.0 Qualcomm certificate number: 478786303-2 - Support QC3.0 Class A: 3.6v-12v (0.2v/step) - Support QC2.0 Class A: 5V 9V 12V - Support voltage configuration for Huawei FCP fast charge 5V 9V - Support voltage configuration for Samsung AFC fast charge 5V 9V - Support 5V 9V 12V voltage configuration for Spreadtrum SFCP fast charge - Support for Apple 2.4A: DP=2.7V, DM=2.7V - Support for Samsung 2.0A: DP=1.2V DM=1.2V 5. Conversion efficiency: greater than 85% TYPE-C interface 1. Output voltage: - 5V-3A is automatically adjusted according to the fast charging protocol - 9V-3A is automatically adjusted according to the fast charging protocol - 12V-3A is automatically adjusted according to the fast charging protocol - 15V-3A is automatically adjusted according to the fast charging protocol - 20V-2.5A is automatically adjusted according to the fast charging protocol 2. Output power: 50W 3. Output protection: Input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. The output has CV/CC characteristics (the output current is less than the set value, and the output CV mode; CC mode 4. Output charging protocol: - Works with iOS 2.4A - For Samsung 5V2A - DCP-1.5A - PPS/PD3.0/PD2.0 - QC3.0/QC2.0 - AFC - FCP - PE2.0/PE1.1 5. Conversion efficiency: greater than 94%

Read more less

Features1. Solar power panels use monocrystalline solar cells, which are much more efficient than ordinary solar cells. 2. Foldable design for more convenient carrying. 3. Equipped with voltage regulator, the voltage output is more stable and the charging is more secure. 4. Comfortable fabric, not afraid of the sun, not afraid of rain, charging without worry. 5. Connect directly to your device via the USB port. 6. Comes with a pocket to keep the device safely stored during the charging process.Specifications1. Input voltage range: DC8-24V 2. Dimensions: Fold: 45.5cm x 45cm x 2.5cm, unfold: 160cm x 45.5cm DC interface 1. Output voltage: Solar output voltage DC8-24V 100W 2. Protection: Anti-reverse charging protection (20A anti-reverse charging diode) 3. DC port specification: 5521 metal material USB1 interface (black): 1. Output voltage: 5.1v+/-0.2v 2. Output power: 15W 3. Output protection: Input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: Support iOS 2.1A, suitable for Samsung 2.0A DP=1.2V, DM=1.2V Support BC1.2 DP and DM short circuit 5. Conversion efficiency: Greater than 85% USB2 interface (orange): 1. Output voltage: 5V-12V automatically adjusted according to the fast charging protocol 2. Output power: 18W (5V3A 9V2A 12V1.5A etc.) 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: support QC3.0/QC2.0 Qualcomm certificate number: 478786303-2 - Support QC3.0 Class A: 3.6v-12v (0.2v/step) - Support QC2.0 Class A: 5V 9V 12V - Support voltage configuration for Huawei FCP fast charge 5V 9V - Support voltage configuration for Samsung AFC fast charge 5V 9V - Support Spreadtrum SFCP fast charge 5V 9V 12V voltage configuration - Support iOS 2.4A: DP=2.7V, DM=2.7V - Support for Samsung 2.0A: DP=1.2V DM=1.2V 5. Conversion efficiency: greater than 85% TYPE-C interface 1. Output voltage: - 5V-3A is automatically adjusted according to the fast charging protocol - 9V-3A is automatically adjusted according to the fast charging protocol - 12V-3A is automatically adjusted according to the fast charging protocol - 15V-3A is automatically adjusted according to the fast charging protocol - 20V-3.25A is automatically adjusted according to the fast charging protocol - 13.2V-3.16A is automatically adjusted according to the fast charging protocol 2. Output power: 65W 3. Output protection: Input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. The output has CV/CC characteristics (the output current is less than the set value, and the output CV mode; CC mode 4. Output charging protocol: - Works with iOS 2.4A - For Samsung 5V2A - DCP-1.5A - PPS/PD3.0/PD2.0 - QC3.0/QC2.0 - AFC - FCP - PE2.0/PE1.1 5. Conversion efficiency: Greater than 94%

Read more less

Features1. The charger utilizes natural sunlight to charge your device, It is a green charger without battery and not too heavy to carry. 2. Adopt ETFE material with anti-adhesive surface, high anti-fouling and easy to clean, highly efficient sun power transformation, stability voltage panel, no need to worry about damaging your phone. 3. The output port is USB, it can be used to charge smartphones, tablets, or any other 5V devices. 4. Compact size and lightweight, press buckle foldable design, easy to store, great for camping, hiking, picnics, and other outdoor activities. 5. With 2 holes on the edge, can hang to use, very convenient. 6. Function support: - Built-in MOS switch high power tube - Intelligent load identification, light load automatically enters standby - Built-in 14bit ADC and fuel gauge - Intelligent identification LED power display - Support line compensation 7. Protection function: input overvoltage, undervoltage protection; output overcurrent, overvoltage, short circuit protection; battery overcharge, overdischarge, overcurrent protection; IC overtemperature protectionSpecifications1. Shell material: ABS 2. USB1 output: 5V 3.1A, 9V 2A, 12V 1.5A 3. Type-C output: 5V 3.1A, 9V 2A, 12V 1.5A 4. USB2 output: 5V 3.5A 5. DC port specification: 4.0 x 1.7mm 6. DC input: 5.5V 5A 7. Type-C input: 5V 3.1A, 9V 2A, 12V 1.5A 9. Power: 12W(6W x 2) 10. Support fast charging protocol: QC 2.0 / QC 3.0 / FCP / AFC / SFCP / SCP / VOOC / MTK PE+1.1&2.0 / USB C DRP / BC 1.2 / PD 11. Solar panel type: Monocrystalline silicon 12. No-load output voltage: 6.6V; rated output voltage: 6V 13. Dimensions: Folded 28.5 x 15.5 x 5cm; unfolded 31.5 x 28.5cm

Read more less

Features1. The charger utilizes natural sunlight to charge your device, It is a green charger without battery and not too heavy to carry. 2. Adopt ETFE material with anti-adhesive surface, high anti-fouling and easy to clean, highly efficient sun power transformation, stability voltage panel, no need to worry damaging your phone. 3. The output port is USB, it can be used to charge smartphones, tablets, or any other 5V devices. 4. Compact size and lightweight, press buckle foldable design, easy to store, great for camping, hiking, picnics, and other outdoor activities. 5. With 2 holes on the edge, can hang to use, very convenient. 6. Function support: - Built-in MOS switch high power tube - Intelligent load identification, light load automatically enters standby - Built-in 14bit ADC and fuel gauge - Intelligent identification LED power display - Support line compensation 7. Protection function: input overvoltage, undervoltage protection; output overcurrent, overvoltage, short circuit protection; battery overcharge, overdischarge, overcurrent protection; IC overtemperature protectionSpecifications1. Shell material: ABS 2. USB1 output: 5V 3.1A, 9V 2A, 12V 1.5A 3. Type-C output: 5V 3.1A, 9V 2A, 12V 1.5A 4. USB2 output: 5V 3.5A 5. DC port specification: 4.0 x 1.7mm 6. DC input: 5.5V 5A 7. Type-C input: 5V 3.1A, 9V 2A, 12V 1.5A 9. Power: 24W(6W x 4) 10. Support fast charging protocol: QC 2.0 / QC 3.0 / FCP / AFC / SFCP / SCP / VOOC / MTK PE+1.1&2.0 / USB C DRP / BC 1.2 / PD 11. Solar panel type: Monocrystalline silicon 12. No-load output voltage: 6.6V; rated output voltage: 6V 13. Dimensions: Folded 28.5 x 15.5 x 7cm; unfolded 63.5 x 28.5cm

Read more less

Features1. The charger utilizes natural sunlight to charge your device, It is a green charger without battery and not too heavy to carry. 2. Adopt ETFE material with anti-adhesive surface, high anti-fouling and easy to clean, highly efficient sun power transformation, stability voltage panel, no need to worry damaging your phone. 3. The output port is USB, it can be used to charge smartphones, tablets, or any other 5V devices. 4. Compact size and lightweight, press buckle foldable design, easy to store, great for camping, hiking, picnics, and other outdoor activities. 5. With 2 holes on the edge, can hang to use, very convenient. 6. Function support: - Built-in MOS switch high power tube - Intelligent load identification, light load automatically enters standby - Built-in 14bit ADC and fuel gauge - Intelligent identification LED power display - Support line compensation 7. Protection function: input overvoltage, undervoltage protection; output overcurrent, overvoltage, short circuit protection; battery overcharge, overdischarge, overcurrent protection; IC overtemperature protectionSpecifications1. Shell material: ABS 2. USB1 output: 5V 3.1A, 9V 2A, 12V 1.5A 3. Type-C output: 5V 3.1A, 9V 2A, 12V 1.5A 4. USB2 output: 5V 3.5A 5. DC port specification: 4.0 x 1.7mm 6. DC input: 5.5V 5A 7. Type-C input: 5V 3.1A, 9V 2A, 12V 1.5A 9. Power: 18W(6W x 3) 10. Support fast charging protocol: QC 2.0 / QC 3.0 / FCP / AFC / SFCP / SCP / VOOC / MTK PE+1.1&2.0 / USB C DRP / BC 1.2 / PD 11. Solar panel type: monocrystalline silicon 12. No-load output voltage: 6.6V; rated output voltage: 6V 13. Dimensions: Folded 28.5 x 15.5 x 6cm; unfolded 48 x 28.5cm

Read more less

1. Using semi-flexible polysilicon solar panels, light and portable, easy to use outdoors2. Integrate 5V voltage stabilizing circuit, and lead out 2 USB ports, which can be powered by external 5V devices through USB, with working indicator light3. Reserve the DC5521 power interface, which can be used to connect to a power management module or controller that supports 18V solar panels4. Comes with a variety of accessories and adapter cables for easy useParameter:1. Solar cells: polysilicon2. Surface material: semi-flexible laminate (not overbending)3. Solar panel power: 10W4. Output interface:DC5521 female port- The solar panel is not converted, and the power supply interface is directly output- Working voltage: 18V +/-5%- Working current: 600mA +/- 5% (Max)- Open circuit voltage: 21.6V +/- 5%Dual USB 5V ports:- After the solar panel passes through the 5V voltage regulator circuit, the output power supply interface- Working voltage: 5V (sufficient power and stable 5V output only if the sun is well illuminated; if there is no sunlight or the light is weak, the output voltage and power are insufficient, so it is not suitable for use)- Output current: 1.5A (voltage regulator circuit can support 5V/3A output, but limited to -solar panel power, actual use of light and loss, 2-way total output up to 1.5A)5. Product size: 435 × 200mmNote: The above parameters are tested under standard conditions (1000W/m2 radiation intensity, 25 degrees Celsius temperature, AM1.5 air quality)

Read more less

1. High efficiency, outdoor waterproof, self-contained bracket, easy to install2. Connect the power management module or other control boards that support 5.5V solar panel charging or power supply, compatible with solar power managers3. Working voltage: 5.5v4. Working current: 1000mA5. Open circuit voltage: 7.2v6. Short circuit current: 1090mA7. Output interface: micro USB, USB/Type-C8. Solar power: 6w9. Application examples: It can be directly connected to low-power outdoor smart electronic devices to support 5.5V solar panels through USB ports, such as monitoring equipment, doorbells, fans, emergency lights, etc.10. Cable length: 3 meters11. Size: 225x195x17.6mminstallation steps:1. Install the stand with the screws included in the package2. Fix the solar panel on the bracket3. Adjust the angle of the panel by rotating the knob on the stand to maximize sunlight absorption

Read more less

1. The bracket can be freely rotated 360 degrees, easy to install2. Two kinds of interface design, easy to use3. High conversion efficiency, low power consumption4. Working voltage: 6V5. Working current: 830mA6. Power: 5W7. Interface: USB, Type-C/USB-C8. Waterproof rating: IP669. Size: about 17.3 x 16.3cm

Read more less

1. Material: ABS plastic2. Easy to use: For professional and DIY solar panel installation3. Save time: quick connect/disconnect PV solar panel connector4. Compatibility: suitable for MC4 connector5. This tool is light but strong6. Small size and double quick tightening make it easy to use and save your installation time7. Lightweight and durable plastic construction8. Convenient assembly of customized photovoltaic lines9. The pointed tip helps to disengage the photovoltaic male and female connectors10. Overall length: 150mm11. Weight: 17 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Features:1. Industrial -grade main control chip, 16 -level AD sampling accuracy, temperature, charging current, and discharge current accurately display, the power generation is clear at a glance.2. Automatic focus on MPP tracking charging, high charging efficiency, continuously tested by the charging process, two -way focus tracking.3. Large -screen LCD display, charging and discharge parameters can be adjusted, ultra -wide charging discharge can be adjusted. As long as you understand the battery characteristics setting its corresponding charging parameters, you can charge a battery at any. There are no adjustments in the market).4. Complete 3 -stage charging management, effectively protect the battery, and the battery is more durable.5. Built -in overheating, overcurrent, short circuit, opening protection, anti -connection protection, when the failure is eliminated, the controller automatically responds, and the device does not damage the device.6. Put the two -way MOSS tube into the irrigation circuit, high -power charging mode, ultra -low heat.Product parameters:1. Material: ABS+ROHS, electronic components2. Rated voltage: 12V/24V3. Rated current: 30A-100A4. Power consumption: 360w-1200W5. Charging current: 30A, 40A, 50A, 60A, 100A (optional)6.usb output: 5V 2A7. Safety protection: short -circuit protection, opening protection, overcurrent protection, overcharge, over -protection, anti -connection protection8. Product size: 17 x 9.5 x 4.5 cm9. Weight: 300 grams

Read more less

Parameter 1. System voltage: 12V/24V automatic adaptation 2. Rated charging current: 30A 3. Rated discharge current: 10A 4. Photovoltaic voltage: 23V for 12V battery; 46V for 24V battery 5. Boost charging voltage: 14.4V 6. Float voltage: 13.7V (default, adjustable) 7. Discharge cut-off voltage: 10.7V (default value, adjustable) 8. Discharge recovery voltage: 12.6V (default value, adjustable) 9. Charging recovery voltage: 13V 10. Photovoltaic panel: 8V for light-controlled light-on threshold (the light-controlled light has a delay) 11. Photovoltaic panel: 8V for light-controlled turn-off threshold (there is a delay for light-control turn-off) 12. USB output: 2 USB outputs, 5V/2.5A 13. Standby current: less than 10mA 14. Working temperature: -35 to 60 degrees Celsius 15. Size: 125x112x34mm 16. Weight: 179g Features 1. Adopt industrial-grade main control chip 2. Large-screen LCD display; charging and discharging current display; cumulative power generation and discharge power query; temperature display; light control + delay control; adjustable charging and discharging parameters; with power-off memory and other functions 3. Dual USB output, current up to 2.5A, support Apple mobile phone charging 4. Complete 3-stage charging management 5. Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery and will not damage the controller 6. Anti-backflow circuit, ultra-low heat generation. System connection 1. Connect the positive and negative poles of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage 2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse them 3. Connect the solar panel to the controller according to the picture Safe use advice 1. The controller is 12V/24V automatic recognition, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type 2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect normal voltage judgment 3. This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.) 4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source 5. The controller will generate heat during operation, please pay attention to install the controller on a flat and well-ventilated surface

Read more less

Parameter1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A3. Rated discharge current: 10A4. Photovoltaic voltage: 23V for 12V battery; 46V for 24V battery5. Boost charging voltage: 14.4V6. Float voltage: 13.7V (default, adjustable)7. Discharge cut-off voltage: 10.7V (default value, adjustable)8. Discharge recovery voltage: 12.6V (default value, adjustable)9. Charging recovery voltage: 13V10. Photovoltaic panel: 8V for light-controlled light-on threshold (the light-controlled light has a delay)11. Photovoltaic panel: 8V for light-controlled turn-off threshold (there is a delay for light-control turn-off)12. USB output: 2 USB outputs, 5V/2.5A13. Standby current: less than 10mA14. Working temperature: -35 to 60 degrees Celsius15. Size: 125x112x34mm16. Weight: 179gFeatures1. Adopt industrial-grade main control chip2. Large-screen LCD display; charging and discharging current display; cumulative power generation and discharge power query; temperature display; light control + delay control; adjustable charging and discharging parameters; with power-off memory and other functions3. Dual USB output, current up to 2.5A, support Apple mobile phone charging4. Complete 3-stage charging management5. Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery and will not damage the controller6. Anti-backflow circuit, ultra-low heat generation.System connection1. Connect the positive and negative poles of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse them3. Connect the solar panel to the controller according to the pictureSafe use advice1. The controller is 12V/24V automatic recognition, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect normal voltage judgment3. This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.)4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source5. The controller will generate heat during operation, please pay attention to install the controller on a flat and well-ventilated surface

Read more less

Parameter 1. System voltage: 12V/24V automatic adaptation 2. Rated charging current: 20A 3. Rated discharge current: 10A 4. Photovoltaic voltage: 23V for 12V battery; 46V for 24V battery 5. Boost charging voltage: 14.4V 6. Float voltage: 13.7V (default, adjustable) 7. Discharge cut-off voltage: 10.7V (default value, adjustable) 8. Discharge recovery voltage: 12.6V (default value, adjustable) 9. Charging recovery voltage: 13V 10. Photovoltaic panel: 8V for light-controlled light-on threshold (the light-controlled light has a delay) 11. Photovoltaic panel: 8V for light-controlled turn-off threshold (there is a delay for light-control turn-off) 12. USB output: 2 USB outputs, 5V/2.5A 13. Standby current: less than 10mA 14. Working temperature: -35 to 60 degrees Celsius 15. Size: 125x112x34mm 16. Weight: 179g Features 1. Adopt industrial-grade main control chip 2. Large-screen LCD display; charging and discharging current display; cumulative power generation and discharge power query; temperature display; light control + delay control; adjustable charging and discharging parameters; with power-off memory and other functions 3. Dual USB output, current up to 2.5A, support Apple mobile phone charging 4. Complete 3-stage charging management 5. Built-in over-current, short-circuit protection, open-circuit protection, and reverse connection protection, all of which are self-recovery and will not damage the controller 6. Anti-backflow circuit, ultra-low heat generation. System connection 1. Connect the positive and negative poles of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage 2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse them 3. Connect the solar panel to the controller according to the picture Safe use advice 1. The controller is 12V/24V automatic recognition, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type 2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affect normal voltage judgment 3. This controller is only suitable for various lead-acid batteries (including open, sealed, gel, etc.) 4. This controller can only use photovoltaic panels as the charging source, do not use DC or other power sources as the charging source 5. The controller will generate heat during operation, please pay attention to install the controller on a flat and well-ventilated surface

Read more less

1. Exhaust flow: about 2200-2500 cubic millimeters2. Motor motor: P: 35/40W, U: 15/18V3. Noise: within 45dB4. Scope of application: plant, workshop, container, farm, etc.5. Material: aluminum alloy6. Blower diameter: SRVF-320: about 320mm; SRVF-350: about 350mm7. 35W/40W solar panel size: about 46 x 50cm8. Product size: about 56.5 x 56.5 x 26cm9. Weight: SRVF-320: approx. 7.8kg; SRVF-350: approx. 8.4kgFeatures:1. Lightning strike protection, rain and cloudy weather and night can use the power adapter to make up for the power, you can also use the remote control (not included) for remote control2. Aluminum alloy base, corrosion-resistant body light, can be shaped arbitrarily according to the roofing conditions3. Fluid structure deflector, reduce airflow transformation resistance, improve the export flow structure4. Automatic temperature control, higher than 25 degrees Celsius to start, lower than 25 degrees Celsius to stop5. Snap design, stainless steel reinforced screws, welding treatment, strong and safe6. DC brushless frequency conversion motor, adaptive to changes in light intensity, tracking solar output power point, 5 times higher efficiency, efficient and quiet operation7. 35/40W solar panel, 3mm high-efficiency monocrystalline silicon, light conversion rate of 25% or more, comes with a high-strength aluminum alloy frame8. Aluminum alloy heat sink cover, strong heat dissipation, integrated design, waterproof, cold-proof and high temperature resistant9. Aluminum alloy 5-blade fan, low vibration, low noise, durable, not easy to deformationInstallation steps:1. Cutting: position and cut a circle on the roof2. Fixing: fix the aluminum base plate with the roof and make it fit3. Installation: install the wind turbine body and windproof support bar to fix with the base plate4. Tighten: adjust the angle of the solar panel, then tighten the screws

Read more less

1. Applicable charging lamps: USB charging small table lamp, USB charging small fan, USB charging light bulb, charging flashlight, camping light, Bluetooth headset, etc. 2. Voltage: 5V 3. Output interface: 15cm.usb motherline 4. Battery type: single crystal solar cell board 5. Rated current: 360mA 6. Open voltage: 6V 7. Short -circuit current: 0.4A 8. Rating working voltage: 6V 9. The rated working current: 0.13A 10. Rated power: 1.8W 11. Size: 160x105x12mm 12. Weight: 170g 13. Note: The product contains only solar panels, without batteries, excluding others

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAh

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAh

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAh

Read more less