DJI & GoPro Accessories

1. After connecting the traditional sports camera accessories, the magnetic snap structure is firmly attached to the main camera, ensuring stability and safety even in strenuous sports scenarios2. Compatible with most traditional sports camera accessories3. Compatible products: DJI Action 24. Weight: about 23g5. Size: approx. 4 x 2.9 x 2.1cm

Read more less

1. Lighter weight, smaller storage size and a carry handle for tool-free mounting to the NATO port2. Handle with its own cool shoe and 1/4 expansion port for external monitor support and low angle shooting3. Compatible with DJI RS 3 / RS 3 Pro / RS 2 / RSC 24. Storage size: 192x40x64mm5. Weight: 210g

Read more less

1. Viscose base with ball head design, the camera can be installed anywhere2. The lens orientation can be adjusted flexibly, and the angle is novel and changeable3. More accessories can be transferred through the bottom 1/4 threaded hole4. Note: Do not paste on curved surfaces, and make sure the surface of the pasted object is clean. It is recommended to use it after pressing for 10 seconds and standing for 30 minutes5. Dimensions: 3.98 x 3.98 x 5.14 cm6. Weight: 49 grams7. Compatible products: Osmo Action 3, DJI Action 2Packing list:-Magnetic ball head assembly × 1

Read more less

1. Adopt O3 Pro technology, with 6km long-range transmission distance at the ground end2. Add DFS band to the original 2.4GHz and 5.8GHz bands, support AES 256-bit encryption algorithm, can output 1080p/60fps full HD images to multiple map transmitter highlight monitors at the same time, security, stability and anti-interference ability are greatly improved3. DJI Ronin 4D transmitter needs to be used with DJI highlight monitor.4. Applicable products: DJI Ronin 4D5. Features:- 6km long-distance transmission- Low latency experience- Remote control- All-in-one designPacking list:- Fuselage map transmitter x 1- Ronin antenna x 4- 3mm ball-head hexagonal wrench x 1- M4-19 hexagon socket head screws x 3

Read more less

1. Three for Tello flight batteries can be connected. When in use, the Battery Manager will charge the batteries in descending order according to the flight battery voltage2. The battery manager is only suitable for use with the extended charging port, no charger is included, please use the designated charger to power the Battery Manager3. Applicable battery type: GB1-1100mAh-3.8V4. Operating ambient temperature: 5~45 degrees celsius5. Input voltage: 5 V6. Input current: 3 A7. Charging time (three flight batteries): approx. 2 hours8. Compatible products: for Tello flight batteries9. Weight: about 29 g

Read more less

1. The FPV remote control joystick is designed to be detachable, so it can be rotated and mounted on the remote control when in use, and placed in the designated recess in the handle area when stored.2. Compatible products: for DJI FPV remote control 23. Easy to install, convenient to store4. Material: aluminum alloy5. Packing list: remote control rocker (pair) × 1

Read more less

1. It needs to be used with the specified charger, and the battery charging port can be expanded to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.2. Compatible products:-Suitable for DJI Mavic 3 Intelligent Flight Battery-Suitable for DJI 65W Portable Charger-Suitable for DJI 65W car charger3. Working environment temperature: 5-40 degrees Celsius4 Inputs: 5-20V, 5A(MAX)5. Charging time:-With 65W portable charger: about 1 hour 36 minutes (single battery)-With 65W car charger: about 1 hour 36 minutes (single battery)6. Warm Tips: Charger is not included.

Read more less

1. Wireless transmission, free from wire constraints2. Small and convenient, easy to carry3. A windproof wool cover can be installed to reduce wind noise4. Ultra-long battery life, can be used continuously for 6 hours5. The shutter can be controlled remotely (only supported with the DJI Pocket 2 universal handle to control the Pocket 2 shutter)6. Acoustic principle: prepolarized pressure sensor7. Pickup pattern: omnidirectional8. Frequency response: 50Hz-20kHz9. External microphone input: 20Hz-20kHz10.SPL(MAX):116dBSPL(1kHz@1%THD)11. Analog input: 3.5mm input12. Applicable charger: 5V / 2A, 5V / 1A, 5V/0.5A13. Working temperature: 0-40 degrees Celsius14. Frequency band: 2.400-2.4835GHz15. Power: 2.4GHz <13dBm (FCC); <10dBm (CE); <12dBm (SRRC); <10dBm (MIC)16. Battery capacity: 320mAh lithium battery17. Charging time: 60 minutes18. Dimensions: 5 x 2.86 x 2.28 cm19. Weight: 21.4 grams20. Compatible products: DJI Pocket 2 Universal ControllerPacking list:-Wireless Microphone × 1-Windproof fleece × 1

Read more less

1. The main camera can be attached to the main camera through the magnetic buckle, which is convenient for shooting2. When used in combination, DJI Action 2 has a battery life of up to 180 minutes, allowing you to enjoy the fun of shooting3. Comes with a microSD card slot, which can expand the external microphone and support hot swap4. Precautions: The endurance module is neither waterproof nor dustproof5. Built-in battery: LiPo 2S 1300 mAh6. Energy: 5 Wh7. Voltage: 7.7V8. Ambient temperature: 0-40 degrees Celsius9. Charging ambient temperature: 5-60 degrees Celsius10. Working time: 180 minutes11. Charging time: 90 minutes12. Video resolution: 1080p/30fps (measured when the electronic stabilization function is turned off, for reference only)13. Dimensions: 3.9 x 4.16 x 2.14mm14. Weight: 56.6 grams15. Compatible products: DJI Action 2Packing list:- battery life module × 1

Read more less

1. Adjustable double ball head design, supports 360° rotation lens orientation2. Strong suction, support recycling, and can protect the adsorption surface3. Reminder: This product is limited to adsorption on clean, flat, non-porous surfaces, and is only suitable for non-impact activities. When adsorbed on the outside of vehicles such as cars and motorcycles, it can only be used on flat roads in cities and towns, and the speed of the vehicle should be strictly controlled below 80 km/h. At the same time, it is recommended to use it with a safety rope to avoid accidents4. Dimensions: Suction Cup: 13.71 x 9.35 x 8.5 cm, Screw: 5.56 x 2.3 x 1.33 cm5. Weight: Suction Cup: 148g, Screw: 11.2g6. Compatible products: Osmo Action 3, DJI Action 2, Osmo ActionPacking list:-Suction cup × 1-Screw × 1

Read more less

1. It needs to be used with the specified charger, and the battery charging port can be expanded to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.2. Connect 100W portable charger or car charger to use3. Adapted products:-Suitable for DJI Mavic 3 Intelligent Flight Battery-Suitable for DJI 100W Desktop Charger-Suitable for DJI 65W Portable Charger-Suitable for DJI 65W car charger4. Working environment temperature: 5-40 degrees Celsius5. Input: 5-20V, 5A(MAX)6. Charging time:-With 100W desktop charger: about 1 hour 10 minutes (single battery)-With 65W portable charger: about 1 hour 36 minutes (single battery)-With 65W car charger: about 1 hour 36 minutes (single battery)7. Warm Tips: Charger is not included.

Read more less

1. The position of the camera is close to the angle of human eyes. When riding low-lying, the camera still faces forward to shoot2. Easy loading and unloading, suitable for various helmets3. Dimensions: Chin Fitting: 9.82 x 43.1 x 5 cm, Screw: 5.56 x 2.3 x 1.33 cm4. Weight: Chin Fitting: 48g, Screw: 11.2g5. Compatible products: Osmo Action 3, DJI Action 2, Osmo ActionPacking list:-Helmet Chin Fitting × 1-Locking screw × 1

Read more less

1. 8K video recording can be installed on DJI Ronin 4D body via PROSSD card compartment2. 8K format recording3. No card reader, plug and play4. Packing list: PROSSD 1TB x 1, USB-C to USB-C data cable x 15. Compatible products: DJI Ronin 4D

Read more less

1. Intelligent flight battery: the battery life can last up to 46 minutes (longest), providing ample space for framing and composition, allowing you to say goodbye to battery life anxiety, enjoy your flight, and return with a full load.2. 100W charging hub: can expand the battery charging port to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.3. 65W car charger: Use it to charge various devices in the car. It can stably output 65 watts of power, and has two output ports of USB-C and USB-A, which can charge the battery and remote control at the same time; it also supports PPS and PD protocols, which can charge mobile phones, computers and other devices.4. Noise-reducing propeller: Each blade has passed a precise dynamic balance test, with low flying noise and high aerodynamic efficiency.5. Shoulder bag: Small and convenient, fast storage, inside can accommodate Mavic 3, any remote control, four batteries and ND filter, etc.6. Adapted products:-for DJI Mavic 3 Classic-for DJI Mavic 3-for DJI Mavic 3 Cinepacking list:Smart flight battery × 2100W charging butler × 165W car charger × 1Noise reduction propellers (pair) × 3Shoulder bag × 1

Read more less

1. Magnetic fit, fast shooting, convenient and easy to use2. Shorten the focus distance, suitable for close-up shooting3. Blur the background and highlight the main body, presenting a sense of layering between virtual and real4. If you have installed the magnetic protection frame, please remove the protection frame and install it5. Reminder: Please pay attention to avoid strong shaking, otherwise it may cause the macro lens to detach from the main camera6. Dimensions: 39 x 39 x 9.4 mm7. Compatible products: DJI Action 2Packing list:-Macro lens x 1

Read more less

1. Comes with front touch screen, microSD card slot and 3 pickup holes, etc.2. The magnetic buckle structure can be firmly connected with the main camera3. When used in combination, the longest battery life of DJI Action 2 can reach 160 minutes4. Front and rear OLED touch screens with wide color gamut for easy control and viewfinder5. Support four-array microphones, audio zoom and pick-up directivity switching functions, and can also be connected to external microphones6. Reminder: The front screen expansion module is neither waterproof nor dustproof7. Display: 1.76 inches 350 ppi 500±50 cd/m2 446×4248. Video resolution: 1080p/30fps (measured when the electronic stabilization function is turned off, for reference only)9. Built-in battery: LiPo 2S 1300 mAh10. Working time: about 160 minutes11. Charging time: about 90 minutes12. Energy: 5 Wh13. Voltage: 7.7 V14. Ambient temperature: 0-40 degrees Celsius15. Charging ambient temperature: 5-60 degrees Celsius16. Dimensions: 3.9 x 4.16 x 2.46 cm17. Weight: 64 grams18. Compatible products: DJI Action 2Packing list:-Front screen expansion module × 1

Read more less

1. It can provide continuous power supply to the head for about 12 hours2. Support PD and QC 2.0 fast charge, in 24W charging specifications, 1.5 hours can be filled3. The hand-held battery is equipped with a charging port to support independent charging4. It adopts clip-type disassembly design and handle lock lever/disassembly button design, supporting double safety to prevent escape5. Model: BG30-1950 mAh-15.4 V6. Type: Lipo 4s7. Capacity: 1950 mAh8. Energy: 30.03 Wh9. Voltage: 12v-17.6 V10. Charging input voltage: 5V/2A, 9V/2a, 12V/2A, 5V/1.6A11. Suitable for DJI Rs 3pro/RS 2

Read more less

1. Screw fixed, stable and not easy to fall2. With installation tool, easy to use and fast installation3. Purpose: to mount DJI PROSSD 1TB external SSD to DJI Ronin 4D body to record 8K video4. Packing list: PROSSD card compartment x 1, M2-20 cup head hexagonal screws x 2, 1.5mm ball head hexagonal wrench x 15. Compatible products: DJI Ronin 4D

Read more less

1. Features: LHCP antenna, long-distance transmission, strong anti-interference ability, SMA connector, small size, light weight2. VSWR<2 Corresponding frequency band: 5.4 GHz - 6 GHz, 5.8 GHz measured gain 2.5 dB, measured axial ratio 3 dB3. Dimensions: 1.3 x 1.3 x 4.4 cm4. Weight: 5.9 grams5. Compatible products: DJI FPV GogglesPacking list:-Flying eye antenna x 2

Read more less

1. Non-slip grip, comfortable hand feeling2. Hollow design, keep the camera floating in the water3. Universal interface, easy to disassemble, and can be quickly and firmly connected to the waterproof case4. The bottom 1/4 threaded hole can be transferred to tripod and other accessories5. Dimensions: 4.9 x 4.9 x 16.5 cm6. Weight: 82 grams7. Compatible products: DJI Osmo Action 3, DJI Action 2Packing list:-Floating handle x 1

Read more less

1. Camera with Multi interface (for Sony) connected to the camera shutter control interface of the DJI RS series head for camera control functions2. Each item is inspected and in good condition before delivery3. Repairing the drone is complicated, please ensure you have professional repair skills or go to a professional repair department4. Compatible products: for DJI RS 3 Mini / RS 3 Pro / RS 3 / RS 2 / RSC 25. Length: 30cm

Read more less

1. The car charger can provide 35.6W (MAX) output power, you can charge the battery while driving.2. With cigarette lighter overheating protection and battery under-voltage protection, to ensure the safety of the vehicle and normal start, so that you can drive without worry.3. Adapted products: for DJI Air 2S / Mavic Air 24. Charging ambient temperature: 5- 40 degrees Celsius5. Input voltage: 14V (ordinary cars); does not support large cars6. Output: 13.2V 2.7A or 12.6V 2.7A7. Battery charging time: about 1 hour 40 minutes (depending on the ambient temperature varies slightly)

Read more less

1. The waterproof case can be used with the DJI Action 2 main camera, or it can be used in combination when the main camera is connected to the front screen expansion module or battery life module2. Provides waterproof safety protection up to 60 meters underwater, helping you explore more underwater mysteries3. Using high-strength glass lens, the field of view is clearer4. Before using the waterproof case, it is recommended to put the waterproof case into the water for about 5 minutes for a waterproof test to ensure that the performance of the waterproof case is intact5. When in use, the power/shoot button can be triggered through the waterproof shell button6. If you have installed the magnetic protection frame, please remove the protection frame and install it7. Reminder: Please ensure that the waterproof case is dry before use (it is recommended to put anti-fog cotton sheets to prevent fogging), and the locking buckle is normal8. Dimensions: 10.8 x 6.4 x 3.3 cm9. Weight: 88 grams10. Compatible products: DJI Action 2Packing list:-Waterproof case x 1

Read more less

1. The UV mirror can prevent the coating on the surface of the lens from directly contacting the external environment, which plays a protective role; 2. PC material frame + ACG optical glass, restore the most authentic colors; 3. Waterproof and oil-proof, tempered and scratch-resistant, lotus water-proof effect, easy to clean without leaving traces; 4. The weight of each filter is only 0.7G, high-precision adaptation, will not affect flight performance; 5. UV filter specially designed for DJI Mini 3 PRO drone.

Read more less

1. Specially designed for DJI Mini 3 Pro / Mavic 3 / Air 2S / DJI RC, precise mold opening 2. High-quality PU leather fabric, it is a high grade of lycra inside, beautiful appearance and upgraded taste 3. Two-way zipper, smooth and not stuck 4. The unique plastic handle is easy to carry and can also be directly stored in the backpack 5. Dimensions: 20.5 x 28 x 8.0cm 6. Weight: 261g

Read more less

1. High quality silicone cover, special design for GoPro Hero11 Black mini. 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast. 6. Not include the camera.

Read more less

1. Usage: Good size protection cover for DJI Mini 3 Pro / Mavic 3 / Air 2S remote controller. 2. Useful: Can effectively prevent the rocker from waggling, scratching or scratched during transport. 3. Durable: Made of plastic, dual holes for fixed, stable, smooth and comfortable feel. 4. Convenient: Small size, lightweight and portable for your outdoor activities. 5. Note: The remote controller not included.

Read more less

1. Made of high quality ABS material, durable and sturdy 2. Suitable for DJI Mini 3 3. Small size and lightweight, without any impact on flight performance 4. Effective protect camera when quadcopter need landing on rough ground outdoor 5. Effectively raise 17mm to avoid ground debris from contaminating the body and damaging the gimbal during take-off and landing 6. Non-destructive quick disassembly design, simple disassembly, no need to worry about damaging the fuselage. 7. Note: drone and its Accessories are not included in package

Read more less

1. The soft silicone strap will not scratch and pinch the paddle. 2. The side is made of ABS material, which is durable and easy to clamp 3. Ingenious anti-release buckle design, fast folding, convenient and quick 4. Small size, light weight, easy to store, can be stored directly in the original bag. 5. Designed for DJI Mini 3 to prevent propeller damage due to movement.

Read more less

1. Multiple modes to meet different photography needs 2. Rechargeable and recyclable 3. Lightweight and compact, easy to carry 4. The built-in magnetic core can easily absorb the metal surface 5. Built-in 200mAh battery and USB port provides convenient charging. 6. Material: ABS

Read more less

1. Specially designed for DJI Mini 3, compatible with DJI RC-N1 remote control, precise mold opening, small size and large capacity, can simultaneously store remote control with screen + charger + 5 batteries + aircraft + other small accessories; 2. High-quality PU leather fabric, exquisite appearance and upgraded taste; 3. Two-way zipper, smooth and not stuck; 4. The unique handle, the appearance is easy to carry, and can also be directly stored in a backpack; 5. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant; 6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance; 7. Size: 28x24x8cm 8. Weight: 563.6g

Read more less

1. Silicone lens cover, specially designed for Insta360 X3 body lens or lens guard protection; 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera lens or lens guard. 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. Specially designed for DJI Mini 3, compatible with DJI RC remote control with screen, precise mold opening, small size and large capacity, can store remote control with screen + charger + 4 batteries + aircraft + other small accessories at the same time; 2. High-quality PU leather fabric, exquisite appearance and upgraded taste; 3. Two-way zipper, smooth and not stuck; 4. The unique handle, the appearance is easy to carry, and can also be directly stored in a backpack; 5. Nylon fabric webbing is used, which is convenient to adjust the length, light and wear-resistant; 6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance; 7. Size: 33x23x8cm 8. Weight: 613.5g

Read more less

1. The semi-enclosed isolation structure protects the propeller and prevents the propeller from scratching people or objects, making flight safer. 2. High-toughness material, which can effectively cushion the impact force. 3. Snap-on design, easy to disassemble and assemble. 4. ABS PC material, fine workmanship, durable. 5. Size: 14.2 x 10.8cm

Read more less

1. Specially designed for DJI RS 3 Mini series, it can accommodate standard suits and self-media suits; 2. ABS material, hard shell design, wear-resistant and drop-resistant; 3. Highly tight and waterproof, can withstand repeated watering tests; 4. High-density sponge, good flexibility, easy to store accessories; 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure. 6. Size: 35.3x26.2x11.4cm 7. Weight: 1899g...

Read more less

Features1. Compatible with GoPro Hero11 Black / HERO10 Black / HERO9 Black; 2. The waterproof layer made of high-density aluminum alloy shell and high-density 9H tempered glass can reach a depth of 40 meters; 3. High-hardness aluminum alloy can protect the camera from damage and prevent scratches; 4. The aluminum alloy material has good thermal conductivity, which can reduce the temperature of the camera when shooting and ensure the performance of the camera; 5. The design of the waterproof case with double cold shoes can be connected with an external fill light; 6. The bottom 1/4 and two-leg adapter interface can be connected to a selfie stick or a tripod.Specifications1. Main material: Aluminum alloy 2. Lens material: High-density 9H tempered glass 3. Waterproof depth: 40 meters (131 feet) 4. Product size: 12 x 9.5 x 5.2cm

Read more less

1. Easy to disassemble and assemble, users can replace it by themselves.2. Lightweight and durable, not easy to deform, no additional burden on the flight.3. Compatible products: suitable for DJI FPV aircraft4. Material: PC material5. Packing list:-DJI FPV Aircraft Top Shell (Transparent Gray) x 1-DJI FPV Aircraft Top Shell (Aurora Green) x 1

Read more less

1. XT60 to DC power cable, connect the goggles and other batteries that meet the voltage requirements.2. Plug and play, easy to use3. Compatible products: suitable for DJI FPV Goggles, DJI FPV Goggles V24. Reminder: Please use batteries that meet the voltage requirements.5. Length: 1.25m

Read more less

1. Comfortable to wear, strong adaptability, easy to disassemble and assemble, and effectively fix the flying glasses.2. Hook and loop fastener with elastic straps , the length can be adjusted, and it is easy to disassemble and assemble.3. Compatible products: suitable for DJI FPV Goggles/DJI FPV Goggles V24. Material: PU, PC, rubber, chemical fiber fabric5. Weight: 27 grams

Read more less

1. Lightweight and strong pulling force, excellent dynamic balance. The press type quick release design is easy to disassemble and durable.2. Compatible products: for DJI FPV flying machine3. Diameter × pitch: 13.46 × 7.11 cm4. Weight (single): 5.2 grams5. Packing list: DJI FPV propellers (pair) x 2

Read more less

1. Modular disassembly and assembly, lightweight design2. Using ultra-thin coaxial cable, the leaking part is wrapped by TPU sheath to improve bending resistance and wear resistance3. The coaxial cable is assembled with the camera back cover, which can be quickly installed on the for DJI FPV air unit4. Reminder: Please refer to the instruction manual for the disassembly method5. Compatible products: suitable for DJI FPV air unit6. Length: 100 mm (without terminals, end cards and back cover)

Read more less

1. Modular disassembly and assembly, lightweight design2. It can effectively protect the camera lens when flying through3. The metal protective cover bracket, the tempered glass protective lens and the glass lens are all detachable and replaceable4. Reusable camera screws fix the metal bracket on the middle frame5. Reminder: Only the two screws on the camera that have not been coated with anti-tamper adhesive can be removed. If you remove other screws that have been coated with anti-tamper adhesive, the warranty will not be granted6. Compatible products: suitable for DJI FPV digital image transmission system camera module7. Material: metal bracket, aluminum alloy CNC and oxidation sandblasting8. Corning lens: 23.8 x 23.8 x 0.8mm9. Dimensions: 25 x 25 x 12.7mmpacking list-1 x lens protection bracket-2 x lens protection glass

Read more less

1. LHCP antenna, strong anti-interference ability, SMA connector2. Long-distance transmission, small size, light weight, and drop resistance3. VSWR less than 2 Corresponding frequency bands: 5.4 GHz - 6 GHz, 5.8 GHz4. Measured axial ratio: 3 dB5. Measured gain: 2.75 dB6. Compatible products: suitable for DJI FPV air system7. Size: 12.7x12.7x55mm8. Weight: 6gKind tips1. The SMA head of this product is an internal threaded inner hole.2. When installing the air terminal antenna, it is necessary to separate the two antennas as much as possible, and the cylindrical parts of the two antenna ends should be separated by at least 40 mm to achieve the communication effect; at the same time, try to keep away from metal and carbon fiber structural objects, and ensure that the antenna is not blocked during flight

Read more less

1. Use with DJI Body Controller Pro and DJI Master Rocker to enhance the anti-interference ability of the control signal and achieve a larger remote control range. In an unobstructed environment, the remote control distance can reach 3 km. At the same time, this accessory can also be used to connect DJI Body Controller Pro and DJI Master Rocker to Ronin S to control the three-axis movement of the stabilizer2. Use with DJI Body Controller Pro and DJI Master Rocker Wheel to achieve greater remote control range and lower latency3. When using with Ronin S, you can use the Ronin S/SC accessory adapter plate to mount the DJI professional wireless receiver to the side of the stabilizer4. Operating frequency: 2.4 GHz, 5.8 GHz5. Input voltage: 5-15 V6. Compatible products: DJI Ronin 2/S, DJI Body Controller Pro, DJI Master Rocker7. Equivalent omnidirectional radiated power (EIRP):- 2.4 GHz: < 30 dbm (FCC), < 20 dbm (CE), < 25 dbm (MIC), < 20 dbm (SRRC)- 5.8 GHz: less than 30 dbm (FCC), less than 14 dbm (CE), less than 19 dbm (SRRC)8. Weight: about 60g9. Size: about 21 x 3.8 x 1.9cmPacking list:- Wireless receiver x 1- Antenna x 2- D-Bus adapter cable x 1- S-Bus adapter cable x 1

Read more less

1. Ronin 2 thumb controller can control the Ronin 2 head three-axis movement, quickly switch configuration parameters and select the head working mode2. By fixing the thumb controller in the handheld ring, Stanikon and other mounting platform, so that a single person in the handheld gimbal shooting at the same time can easily control the gimbal3. Model: R2THC4. Power: less than 0.5 W5. Working voltage: 5-17 V6. Applicable products: DJI Ronin 27. Packing list: thumb controller (including connection cable) x 1, adapter x 18. Weight: about 182.5g9. Size: about 7.1 x 4.3 x 4.3 cm

Read more less

1. The soft silicone strap will not scratch and pinch the paddle. 2. The side is made of ABS material, which is durable and easy to clamp 3. Ingenious anti-release buckle design, fast folding, convenient and quick 4. Small size, light weight, easy to store, can be stored directly in the original bag. 5. Designed for DJI Mini 3 to prevent propeller damage due to movement.

Read more less

Features1. Specially designed protective frame for GoPro Hero11 Black Mini. 2. The material is high-quality PC plastic, which is strong and durable, and can effectively protect the camera accessories from bumps; 3. Lightweight and portable, smooth frame design, easy to install and disassemble; 4. Simple but unique design makes it perfect for your camera; 5. Note: Only the photo frame, base buckle and screws are included, the camera is not included.Package List1. Protective Frame x 1 2. Short Screw x 1 3. Buckle Basic Mount x 1

Read more less

1. Easy to use, easy to install2. Made of high quality material, sturdy and durable3. With the focuser motor mounting kit, the focuser motor can be mounted on the Ronin SC4. Compatible products: DJI Ronin SC5. Packing list:- Fixing kit x 1- 12mm tube x 1- M4 screws x 4- Ronin SC RSS one split two cable x 1

Read more less