Electronics Modules

Overview1. This is an E-Ink display HAT for Raspberry Pi, 7.8 inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface, supports partial refresh.2. Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Low power consumption, basically power is only required for refreshing3. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards4. USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.5. Comes with development resources and manual (examples for Raspberry Pi/STM32)Specifications1. Operating voltage: 5V2. Interface: USB/SPI/I80/I2C3. Outline dimension: 173.8mm x 127.6mm x 0.78mm4. Display size: 158.184mm x 118.638mm5. Dot pitch: 0.0845mm x 0.0845mm6. Resolution: 1872 x 14047. Display color: Black, white8. Gray scale: 2-16 (1-4 bit)9. Full refresh time: 450ms10. Total refresh power: 1.2W(typ.)11. Total standby power: 0.1W(typ.)12. Viewing angle: >170 degree13. Weight: 77gPacking List:1. 7.8 inch e-Paper x12. e-Paper IT8951 Driver HAT (B) x13. 7.8 inch e-Paper Adapter x14. 33PIN FFC (same side contact) x15. USB type A plug to micro B plug cable x26. PH2.0 20cm 8Pin x17. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 17cm * 12cm * 1cm / 6.69inch * 4.72inch * 0.39inch Qty per Carton 360 Carton Weight 15.00kgs / 33.07lb Carton Size 51cm * 36cm * 40cm / 20.08inch * 14.17inch * 15.75inch Loading Container 20GP: 363 cartons * 360 pcs = 130680 pcs 40HQ: 842 cartons * 360 pcs = 303120 pcs

Read more less

Overview 1. This is a universal portable touch monitor, which features Type-C and HDMI connectivity, 1920x1080 pixels, toughened glass capacitive touch panel, and powerful 10000mAh battery. 2. It is a good companion for Raspberry Pi, besides, other popular mini PC are also supported, such as Jetson Nano. In the case of working as a simple monitor with host devices like desktop computer, notebook, cell phone, or game console, it is also a "serious" option. Switch to the HD big screen in one second through the Type-C or HDMI connection, then start to study/work effectively, or enjoy yourself with your favorite drama/game. Features 1. Display: 15.6 inch, 1920x1080 pixels, IPS screen (up to 178?° viewing angle) 2. Touch panel: capacitive, toughened glass panel, 6H hardness 3. Display interface: Type-C/HDMI 4. Touch interface: Type-C/USB 5. Support popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black 6. When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free 7. Support desktop computers with Windows 10/8.1/8/7, 10-point touch, and driver free 8. Support notebooks for Apple, HUAWEI, Lenovo, HP, DELL, etc. dual-screen display, balance the work and entertainment 9. Support cell phones for HUAWEI, OPPO, Samsung, etc. mirror cast via the Type-C connection, ideal companion for travelling 10. Support popular game consoles like for Microsoft XBOX360, Sony PS4, and Nintendo Switch 11. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 12. USB expansion port for mouse/keyboard 13. Type-C/HDMI audio input, 3.5mm headphone/speaker jack 14. Embedded ferrite Hi-Fi speaker 15. 10000mAh big battery, enables 3-4h playtime on the trip Specifications 1. Weight: 1772g 2. Dimensions: 373.1x238.16x15 (mm) Packing List: 1. 15.6 inch FHD Monitor x1 2. Power adapter US head Type-C x1 3. USB-A to USB-C cable x1 4. USB-C to USB-C cable x1 5. HDMI cable x1 6. HDMI to Micro HDMI Adapter x1Specification: Package Weight One Package Weight 1.90kgs / 4.20lb One Package Size 24cm * 37cm * 2cm / 9.45inch * 14.57inch * 0.79inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 24cm * 37cm * 40cm / 9.45inch * 14.57inch * 15.75inch Loading Container 20GP: 750 cartons * 20 pcs = 15000 pcs 40HQ: 1742 cartons * 20 pcs = 34840 pcs

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 15gPacking List:1. IMX219-160 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs 40HQ: 644 cartons * 960 pcs = 618240 pcs

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. Supports night vision when works with infrared LEDs3. 8 Megapixels4. Sensor: IMX2195. Resolution: 3280 × 24646. Lens specifications:- CMOS size: 1/4 inch- Aperture (F): 2.35- Focal Length: 3.15mm- Angle of View (diagonal): 160 degree- Distortion: <14.3%7. 4 screw holes8. Used for attachment9. Provides 3.3V power output10. Supports connecting infrared LED and/or fill flash LED11. Dimension: 25mm x 24mm12 . Weight: 31gPacking List:1. IMX219-160IR Camera x12. Infrared LED Board (B) 2PCS x13. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 468 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 39cm / 23.62inch * 14.17inch * 15.35inch Loading Container 20GP: 316 cartons * 468 pcs = 147888 pcs 40HQ: 734 cartons * 468 pcs = 343512 pcs

Read more less

Features1. Support NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.0- Focal Length: 2.96mm- Angle of View (diagonal): 77 degree- Distortion: <1%- Lens dimensions: 6.5mm x 6.5mm5. 4 screw holes6. Used for attachment7. Provide 3.3V power output8. Support connecting infrared LED and/or fill flash LED9. Dimension: 25mm x 24mm10. Weight: 12gPacking List:1. IMX219-77 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 3cm * 2cm * 1cm / 1.18inch * 0.79inch * 0.39inch Qty per Carton 16000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 16000 pcs = 4432000 pcs 40HQ: 644 cartons * 16000 pcs = 10304000 pcs

Read more less

Features1. Support NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.0- Focal Length: 0.87mm- Angle of View (diagonal): 200 degree- Distortion: <11%6. 4 screw holes7. Used for attachment8. Provides 3.3V power output9. Dimension: 25mm × 24mm10. Weight: 17gPacking List:1. IMX219-200 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 3cm / 3.94inch * 2.36inch * 1.18inch Qty per Carton 468 Carton Weight 23.40kgs / 51.59lb Carton Size 60cm * 36cm * 39cm / 23.62inch * 14.17inch * 15.35inch Loading Container 20GP: 316 cartons * 468 pcs = 147888 pcs 40HQ: 734 cartons * 468 pcs = 343512 pcs

Read more less

Features:1. 15.6 inch IPS screen,1920x1080 hardware resolution2. Toughened glass capacitive touch panel, 6H hardness3. Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free- When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free4. Support popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch5. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.6. 3.5mm audio jack, supports HDMI audio output7. Embedded ferrite Hi-Fi speaker8. Also support VGA input (specific cable is required and should be purchased separately)9. 100x100mm spacing mounting holes (M4 screw hole) for general wall mount10. Comes with 55 degree tilt angle stand11. Dimension: 321.7*381.6*16.6mm12. Weight: 1886gPacking List:1. 15.6 inch HDMI LCD (H) (with case) x12. Power adapter 12V x13. HDMI cable x14. HDMI to Micro HDMI Adapter x 15. USB type A plug to micro B plug cable x1Specification: Package Weight One Package Weight 2.90kgs / 6.39lb One Package Size 40cm * 36cm * 6cm / 15.75inch * 14.17inch * 2.36inch Qty per Carton 6 Carton Weight 15.00kgs / 33.07lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 6 pcs = 3084 pcs 40HQ: 1194 cartons * 6 pcs = 7164 pcs

Read more less

Overview 1. Atmel-ICE-C is the cost effective solution for the powerful Atmel-ICE, it adopts the original ATMEL-ICE-PCBA and comes with a durable aluminium alloy enclosure. 2. Atmel-ICE-C delivers the same functionality and usability just as the ATMEL-ICE Full Kit, it is capable of debugging and programming Atmel ARM Cortex -M based Atmel SAM and AVR microcontrollers with on-chip debug capability. Key Features 1. Support JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces 2. Full source-level debugging in Atmel Studio 3. Support all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target) 4. Up to 128 software breakpoints 5. 1.62 to 5.5V target operation 6. USB powered 7. Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out Supported Software 1. Support Atmel Studio 6.2 or higher version 2. Directly supports ICC8AVR or higher version 3. Support programming HEX files generated by ICCAVR, CVAVR, IAR, etc. Supported Devices 1. Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces 2. Programming and on-chip debugging of all Atmel AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces 3. JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces 4. Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces 5. Programming of all Atmel tinyAVR 8-bit MCUs with support for the TPI interface 6. For more details, please visit UC3, Mega, SAM , Tiny, Xmega Specifications 1. INTERFACE VOLTAGE: 1.62V ~ 5.5V 2. JTAG CLOCK: 32kHz ~ 7.5MHz 3. PDI CLOCK: 32kHz ~ 7.5MHz 4. DEBUGWIRE BAUDRATE: 4kbit/s ~ 0.5Mbit/s 5. AWIRE BAUDRATE: 7.5kbit/s ~ 7Mbit/s 6. SPI CLOCK: 8kHz ~ 5MHz 7. SWD CLOCK: 32kHz ~ 2MHz 8. PC INTERFACE: USB 2.0 high speed Package list 1. Atmel-ICE-C unit x1 2. USB type A plug to micro B plug cable x1 3. IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector x1 4. Multi-functional adapter board x1 5. 10pin flat cable x1 6. 10pin 100mil squid cable x1 7. 6-pin to 10-pin ISP cable x1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 120 Carton Weight 15.00kgs / 33.07lb Carton Size 48cm * 40cm * 40cm / 18.9inch * 15.75inch * 15.75inch Loading Container 20GP: 347 cartons * 120 pcs = 41640 pcs 40HQ: 806 cartons * 120 pcs = 96720 pcs

Read more less

OverviewThis is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.SpecificationsDimension: 82.05mm x 36.10mmThrough holes diameter: 2mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs 40HQ: 644 cartons * 960 pcs = 618240 pcs

Read more less

OverviewThe MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.Features1. I2C controlled, expands 2 signal pins as 16 I/O pins2. I2C address configurable by shorting the A0/A1/A2 jumpers3. Provides two connector options: PH2.0 terminal and/or solder pads, allows multi I2C modules to be stacked4. Onboard voltage translator, compatible with 3.3V/5V level5. Comes with development resources and manual (examples for Raspberry Pi / micro:bit / Arduino / STM32)Specifications1. Operating voltage: 5V/3.3V2. Interface: I2C3. Interrupt pins: INTA, INTB4. Expansion I/Os: 165. Dimension: 38mm × 23mm6. Mounting hole size: 2.0mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 52.00kgs / 114.64lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs 40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Read more less

Features1.4 in 1, suit for DIYIRM, infrared receiver moduleTemperature SensorJoystickBuzzer2.Compatible with expansion boards like DVK5123.Connections are controlled by jumpersSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 5cm * 2cm / 3.15inch * 1.97inch * 0.79inch Qty per Carton 1120 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 1120 pcs = 332640 pcs 40HQ: 690 cartons * 1120 pcs = 772800 pcs

Read more less

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B. It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you're almost there, our open source demo codes is ready to help you get started fast.Raspberry Pi 3 Features1. BCM2837, 1.2GHz 64-bit quad-core ARM Cortex-A532. 1GB RAM3. 10/100 Ethernet port4. 802.11n WiFi NIC5. Bluetooth 4.1 & Bluetooth Low Energy (BLE)6. HDMI port7. USB 2.0 interface x 48. Micro SD card slot9. Combined 3.5mm audio jack and composite video10. 40-pin GPIO interface11. Camera interface (CSI)12. Display interface (DSI)13. Upgraded power management, supports more peripherals (requires a 2.5A power supply or above)AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTPackage Contents1. AlphaBot2-Pi (adapter board) x12. AlphaBot2-Base (base chassis) x13. RPi Camera (B) x14. Micro SD Card 16GB x15. Power adapter US standard 5V/3A micro x16. SG90 servo x25. 2 DOF pan and tilt kit x17. IR remote controller x18. FC-20P cable 8cm x19. USB type A plug to micro B plug cable x110. 15PIN FFC 25cm x111. AlphaBot2-Pi screws x112. Micro SD Card Reader x1 (Extra Free)13. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 15cm * 11cm * 8cm / 5.91inch * 4.33inch * 3.15inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 33cm * 40cm / 23.62inch * 12.99inch * 15.75inch Loading Container 20GP: 336 cartons * 60 pcs = 20160 pcs 40HQ: 781 cartons * 60 pcs = 46860 pcs

Read more less

Overview1. Smart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.2. Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.3. If you have got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.Features1. Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.2. Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.3. Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.4. Onboard TB6612FNG dual H-bridge motor driver.5. Onboard 0.91inch 128×32 pixels OLED, allows to display robot IP address, RAM, battery life, etc.6. Onboard ADS1115 AD acquisition chip for monitoring the battery in real time.7. Weight: 773gWhat is on the JetBot Expansion Board1. S-8254AA: Lithium battery protector, provides protections for over-charge, over-discharge, over-current, and short circuit2. ADS1115: 16-bit AD acquisition chip, monitoring the battery in real time3. AO4407A:: P-Channel MOSFET for protection circuit4. APW7313:: 5V power regulator for powering the Jetson Nano5. PCA9685: PWM controller, I2C interface, for IO expansion6. TB6612FNG: dual H-bridge motor driver7. 0.91inch OLED: SSD1306 driver chip, 128×32 pixels8. Battery charger input: charging the 3x 18650 batteries9. Power switch10. 18650 battery holder11. Motor connector (bottom side)12. Jetson Nano communication header: I2C interface and power supplyPacking List1. Metal box x12. Camera holder x13. Acrylic piece x14. Jetbot expansion board x15. IMX219-160 Camera x16. Wireless-AC8265 x17. Motor 2PCS x18. Wheel 2PCS x19. Omni-direction wheel 2PCS x110. Power adapter EU head x111. 12.6V battery charger x112. Wireless gamepad x113. Screwdriver 2PCS x114. 6Pin 9cm cable x115. Screws pack x116. Spanner x117. Cooling fan x118. Micro SD card reader x1Specification: Package Weight One Package Weight 1.04kgs / 2.30lb One Package Size 22cm * 16cm * 4cm / 8.66inch * 6.3inch * 1.57inch Qty per Carton 20 Carton Weight 21.50kgs / 47.40lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 20 pcs = 4860 pcs 40HQ: 566 cartons * 20 pcs = 11320 pcs

Read more less

Features1. Quality chassis with track: Adopting 37-520 full-metal DC geared motor, High torque, low noise 2. 180 degree wide angle rotation, flexible controlling robotic arm 3. Quality serial bus full-metal digital servo: High torque, high precision, preventing, it from being stuck and pamaged 4. Auto collision avoidance: Collecting data via camera by taking enough images of different conditions, using the data to train the neutral network, combined With AI algorithm, achieving auto collision avoidance on sorts of environments. 5. Motion detection: Capturing moving objects on the video by motion detection 6. Color recognition and tracking: Recognizing and locking specified color by camera, and then using pan & tilt to track the specified color automatically 7. 3D coordinate system controlled robotic arm, calculated via Inverse Kinematics algorithm: Input coordinate of the target, calculating the moving angles of the 4-DOF servos by inverse kinematics algorithm, and then controlling the servos via serial bus, moving the robotic arm to reach target position 8. JupyterLab programming: JupyterLab is a web-based interactive development environment, supports multi data formats including code, document, image/video, UI control interface, etc., provides rich visualized output, allows easily creating dashboard and UI, supports flexible configuration and arrangement for modular interface. 9. 8MP 160 degree FOV camera: IMX219 sensor, 3280 x2464 resolutionPackage List1. Aluminum alloy kit x1 2. JETANK expansion board x1 3. Wireless-AC8265 with antenna x1 4. IMX219-160 Camera x1 5. Acrylic camera spacer x1 6. Camera FFC x1 7. 0.91inch OLED x1 8. 12.6V 2A power supply + additional EU head x1 9. Robotic arm gripper x1 10. Thrust bearing x1 11. Flange bearing x2 12. Coupler x2 13. Gearmotor x2 14. 5264 servo wire x1 15. Track kit (including bolt, nut, and screwdriver) x2 16. 2 x 5 Pin wire x1 17. Spanner x1 18. L-form hex socket spanner 2PCS x1 19. SCS15-AP servo x4 20. Screwdriver 2PCS x1 21. SCS15-S servo x1 22. Card reader x1 23. Mini cross wrench sleeve x2 24. Cooling fan x1 25. PH2.0 4PIN dual connector cable x1 26. Screws pack x1Specification: Package Weight One Package Weight 2.00kgs / 4.42lb One Package Size 32cm * 22cm * 16cm / 12.6inch * 8.66inch * 6.3inch Qty per Carton 8 Carton Weight 17.00kgs / 37.48lb Carton Size 65cm * 45cm * 33cm / 25.59inch * 17.72inch * 12.99inch Loading Container 20GP: 276 cartons * 8 pcs = 2208 pcs 40HQ: 641 cartons * 8 pcs = 5128 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.08kgs / 2.37lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs 40HQ: 499 cartons * 20 pcs = 9980 pcs

Read more less

About The ProductThis is an AI Racing Robot kit based on Jetson Nano Developer Kit. Supports deep learning, auto line following, autonomous driving and so on.Specifications1. Camera: 8MP HD resolution, 160 degree FOV wide angle camera 2. OLED: 0.91 inch 128 x 32 pixels 3. Wireless: AC8265 4. Driving Type: Ackerman steering / Dual gearmotor rear wheel drive 5. Power supply: 12.6V, 18650 battery x 3 (connected in series). Note: the 18650 batteries are NOT included. 6. Motor: - 37-520 DC gearmotor - Reduction rate 1:10 - Idle speed 740RPM 7. Chassis: Aluminum alloy chassis 8. Program library: JetRacer, DonkeyCar 9. Suggestion: Competition level; Experienced programming skill requiredPackage List2. EVA felt pad 2PCS 3. 3D-printed motor lid 4. JetRacer expansion board 5. IMX219-160 Camera 6. Wireless-AC8265 7. Acrylic piece 8. Servo mount 9. Metal Gearmotor 2PCS 10. Tire 4PCS 11. Coupler 2PCS 12. MG996R servo 13. MG996R servo wheel 14. Steering knuckle 2PCS 15. Ball bearing 4PCS 16. M3 plastic ball joint 4PCS 17. M3 pull bar 2PCS 18. 12.6V battery charger + EU head 19. Wireless gamepad 20. 6Pin cable 21. Spanner 2PCS 22. Screwdriver 2PCS 23. Mini cross wrench sleeve 24. 4010 cooling fan 25. Micro SD card reader 26. Screws pack 27. Track mapSpecification: Package Weight One Package Weight 3.07kgs / 6.77lb One Package Size 32cm * 22cm * 16cm / 12.6inch * 8.66inch * 6.3inch Qty per Carton 4 Carton Weight 13.20kgs / 29.10lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 4 pcs = 2480 pcs 40HQ: 1439 cartons * 4 pcs = 5756 pcs

Read more less

FeaturesSmart robot is project of electronic enthusiasts, and there have been several robots based on Raspberry Pi Zero W, 3B+, 4B in Waveshare product line. Now, here comes the Pico version: PicoGo! The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, BT/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development. PicoGo smart mobile robot features: 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 2. Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating 3. Recharge/Discharge circuit, allows programming/debugging concurrently while recharging 4. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking 5. Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring 6. 1.14 inch IPS colorful LCD display, 240 x135 pixels, 65K colors 7. Integrates BT module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP 8. N20 micro gearmotors, with metal gears, low noise, high accuracy 9. Colorful RGB LED, pretty cool! Raspberry Pi Pico controller board features: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB 1.1 with device and host support 5. Low-power sleep and dormant modes 6. Drag-and-drop programming using mass storage over USBPackage List1. Raspberry Pi Pico (pre-soldered header) x1 2. PicoGo base board x1 3. PicoGo acrylic panel x1 4. 1.14inch LCD Module x1 5. Ultrasonic sensor x1 6. 5V 3A power supply x1 7. IR remote controller x1 8. USB-A to micro-B cable 1.2m x1 9. PH2.0 8Pin cable 5cm opposite side headers x1 10. Mini cross wrench sleeve x1 11. Screwdriver x1 12. Screws and standoffs pack x1Specification: Package Weight One Package Weight 0.46kgs / 1.02lb One Package Size 15cm * 11cm * 9cm / 5.91inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 17.00kgs / 37.48lb Carton Size 60cm * 33cm * 36cm / 23.62inch * 12.99inch * 14.17inch Loading Container 20GP: 374 cartons * 40 pcs = 14960 pcs 40HQ: 868 cartons * 40 pcs = 34720 pcs

Read more less

FeaturesSmart robot is project of electronic enthusiasts, and there have been several robots based on Raspberry Pi Zero W, 3B+, 4B in Waveshare product line. Now, here comes the Pico version: PicoGo! The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, BT/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development. PicoGo smart mobile robot features: 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 2. Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating 3. Recharge/Discharge circuit, allows programming/debugging concurrently while recharging 4. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking 5. Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring 6. 1.14 inch IPS colorful LCD display, 240 x135 pixels, 65K colors 7. Integrates BT module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP 8. N20 micro gearmotors, with metal gears, low noise, high accuracy 9. Colorful RGB LED, pretty cool! Raspberry Pi Pico controller board features: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB 1.1 with device and host support 5. Low-power sleep and dormant modes 6. Drag-and-drop programming using mass storage over USBPackage List1. Raspberry Pi Pico (pre-soldered header) x1 2. PicoGo base board x1 3. PicoGo acrylic panel x1 4. 1.14inch LCD Module x1 5. Ultrasonic sensor x1 6. 5V 3A power supply x1 7. IR remote controller x1 8. USB-A to micro-B cable 1.2m x1 9. PH2.0 8Pin cable 5cm opposite side headers x1 10. Mini cross wrench sleeve x1 11. Screwdriver x1 12. Screws and standoffs pack x1Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 11cm * 9cm / 5.91inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 17.00kgs / 37.48lb Carton Size 60cm * 33cm * 36cm / 23.62inch * 12.99inch * 14.17inch Loading Container 20GP: 374 cartons * 40 pcs = 14960 pcs 40HQ: 868 cartons * 40 pcs = 34720 pcs

Read more less

Features1. Onboard three 18650 batteries, 7800mAh, up to 12.6V voltage output, and stronger motor power (not included batteries). 2. Onboard S-8254AA + AO4407A lithium battery protection circuit, with anti-overcharge, anti-over-discharge, anti-over-current and short-circuit protection functions. 3. The onboard APW7313 voltage regulator chip can provide a stable 5V voltage to the Jetson Nano. 4. The onboard TB6612FNG dual H-bridge motor driver chip can drive the left and right motors to work. 5. Onboard 0.91-inch 128 x 32 resolution OLED, real-time display of car IP address, memory, power, etc. 6. The onboard ADS1115 AD acquisition chip is convenient for real-time monitoring of battery power.Package List1. Jetson Nano 2GB Developer Kit 2. Micro SD Card 64GB 3. JetRacer metal kit 6PCS 4. EVA felt pad 2PCS 5. 3D-printed motor lid 6. JetRacer expansion board 7. IMX219-160 Camera 8. USB wireless NIC 9. Acrylic piece 10. Servo mount 11. Metal Gearmotor 2PCS 12. Tire 4PCS 13. Coupler 2PCS 14. MG996R servo 15. MG996R servo wheel 16. Steering knuckle 2PCS 17. Ball bearing 4PCS 18. M3 plastic ball joint 4PCS 19. M3 pull bar 2PCS 20. 12.6V 2A battery charger + EU head 21. Wireless gamepad 22. 6Pin cable 23. Spanner 2PCS 24. Screwdriver 2PCS 25. Mini cross wrench sleeve 26. 4010 cooling fan 27. Micro SD card reader 28. Screws pack 29. Track mapSpecification: Package Weight One Package Weight 2.97kgs / 6.54lb One Package Size 32cm * 25cm * 12cm / 12.6inch * 9.84inch * 4.72inch Qty per Carton 8 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 8 pcs = 3048 pcs 40HQ: 885 cartons * 8 pcs = 7080 pcs

Read more less

About The ProtuctThis is an AI Racing Robot kit based on Jetson Nano 2GB Developer Kit. Supports deep learning, auto line following, autonomous driving, and so on.NoticeWe do not provide batteries in the AI Kit or the Acce Package because of the shipping policy, you need to buy batteries in the local market.Specifications1. Camera: 8MP HD resolution, 160 degree FOV wide angle camera 2. OLED: 0.91 inch 128 x 32 pixels 3. Wireless: USB 4. Driving Type: Ackerman steering / High speed motors 4WD / Front and rear axle differentials 5. Shock Absorber: Adjustable oil-filled shocks / 4WD independent suspension 6. Power supply: 8.4V, 18650 battery x 4 (two in parallel, two in series). Note: the 18650 batteries are NOT included. 7. Servo: 6kg/cm torque 8. Chassis: Quality rugged plastic chassis 9. Crashproof: Front sponge 10. Program library: JetRacer, DonkeyCar 11. Suggestion: Competition level; Experienced programming skill requiredPackage List1. Jetson Nano 2GB Developer Kit 2. Micro SD Card 64GB 3. On-road chassis 4. JetRacer Pro expansion board 5. USB wireless NIC 6. IMX219-160 Camera 7. Acrylic camera spacer 8. Camera holder 9. Wireless gamepad 10. Cooling fan 11. 6Pin cable 12. Micro SD card reader 13. Spanner 14. Screwdriver x2 15. 8.4V 2A battery charger + EU head 16. Screws pack 17. Track mapSpecification: Package Weight One Package Weight 2.88kgs / 6.34lb One Package Size 32cm * 25cm * 12cm / 12.6inch * 9.84inch * 4.72inch Qty per Carton 8 Carton Weight 24.80kgs / 54.67lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 8 pcs = 3048 pcs 40HQ: 885 cartons * 8 pcs = 7080 pcs

Read more less

1. Battery life: 2.5 hours2. Microprocessor: RP20403. Power supply mode: single 18650 2200MAH (not included) charging interface: microUSB4. Communication method: Bluetooth 5.05. Remote control method: mobile APP/infrared remote control6. Input device: photoresistor, four-way line inspection, sound sensor, ultrasonic, bluetooth, infrared receiver7. Output device: OLED display, passive buzzer, N20 motor, steering gear interface, programmable RGB lights8. Safety protection: overcurrent protection, overcharge protection, motor stall protection Motor solution: N20 motor x29. Dimensions after assembly: 120x96x56mm10. Weight after assembly: 182 grams11. The Raspberry Pi Pico robot is a compact and cost-effective educational programmable two-wheel-drive smart car12. Based on Raspberry Pi Pico, using MicroPython as a programming language, combined with onboard sensors, many interesting functions are realized13. The robot has an infrared receiver and a Bluetooth module, and users can remotely control it through an infrared remote control or a mobile phone APP14. The servo interface, IIC interface, and public pins are reserved on the expansion board to facilitate users to expand more functions15. Small size, reasonable layout, high cost performance16. Lots of onboard resources: tracking sensor, ultrasonic, light sensor, sound sensor, buzzer, bluetooth module, OLED display, infrared receiver17. Reserve a variety of expansion interfaces: IIC interface, servo interface, GPIO interfacepacking list:- Pico car expansion board x 1- Pico motherboard x 1- N20 motor x 1- N20 motor mount x 1- N20 Universal Wheel x 1- OLED screen x 1- 5.0 Bluetooth module x 1- Micro USB cable x 1- Instructions x 1- Remote control x 1- Screw bag x 1- Screwdriver x 1- Tracking Map x 1- N20 tire x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 182 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 182 pcs = 32214 pcs 40HQ: 412 cartons * 182 pcs = 74984 pcs

Read more less

1. Data information: distance, angle, intensity, time stamp2. Scanning angle: 360 degrees3. Dot frequency: 4,500 dots/second4. Rotation speed: 7~15Hz, default 10Hz5. Angle resolution: 0.8 degrees @10Hz6. Laser emission pitch angle: 0.5°-2°7. Laser zero-degree exit azimuth: 0±2 degrees8. Laser wavelength: near infrared9. Human eye safety level: Class 1 IEC60825-1:201410. Anti-ambient light performance: 30,000 lux11. Working life: 10,000 hours12. Working power supply: DC 5.0±0.5V13. Voltage ripple: 100mV14. Starting current: 500mA15. Typical value of working current: 260mA16. Protection class: IP5X17. Lightweight and compact, it can be easily installed on any equipment18. Using the principle of TOF ranging, the scanning radius can reach 12 meters, which can effectively perceive the environmental information in the far direction, and is suitable for most indoor and outdoor scenes19. Based on ROS robots, we provide ROS1, ROS2 driver codes, debugging software and related tutorials for user reference20. In addition to the separate lidar module, Yahboom also provides connecting cables and serial port adapter boards for users to debug and use21. The scanning frequency is 7Hz~15Hz, the sampling frequency is 4500 times/second, and the strong light resistance is 30kLux22. Can be used for Raspberry Pi, Jetson, RDK-X3 development board, personal computer and other equipment23. Adopt serial communication interface, support DC 5V working voltage24. The ranging core of MS200 radar rotates clockwise, which can realize 360-degree omni-directional scanning and ranging detection of the surrounding environment, so as to obtain the contour map of the surrounding environment25. It can resist the strong light environment of 30klux, and realize the high-frequency and high-precision distance measurement indoor and outdoor26. After connecting the MS200 lidar to your computer through the Type-c data cable, you can use it directly without any coding work27. Dimensions: 37.7x37.5x33.0mm28. Net weight: about 40 gramsSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 36 Carton Weight 6.80kgs / 14.99lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 36 pcs = 15804 pcs 40HQ: 1019 cartons * 36 pcs = 36684 pcs

Read more less

Features:1. WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.2. Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.3. Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.4. Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.5. Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.6. WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.7. Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.Product parameters:1. Tire material: nylon wheels, rubber tires2. Body material: 5052 aluminum alloy (2mm thick)3. OLED screen: 0.91 inches4. Chassis height: 33.70mm5. Tire diameter: 80mm6. Tire width: 42.50mm7. Motor: N20 12V 200RPM x 48. Number of driving wheels: 49. Running speed: 1.25m/s10. Vertical obstacle surmounting ability: 40mm11. Drive payload: 0.8kg12. Climbing ability: 22 degrees13. Minimum turning radius: 0m (rotating in place)14. Motor power: 1.5W x 415. Remote control function: WIFI AP/STA16. Upper surface area: 17551 square millimeters17. Communication interface: UART/serial bus servo interface/I2C18. Battery support: 18650 lithium battery × 3 (delivered without battery)19. Overall dimensions: 194×168×100mm20. Weight: 860gSpecification: Package Weight One Package Weight 1.10kgs / 2.43lb One Package Size 25cm * 21cm * 15cm / 9.84inch * 8.27inch * 5.91inch Qty per Carton 2 Carton Weight 3.30kgs / 7.28lb Carton Size 27cm * 23cm * 32cm / 10.63inch * 9.06inch * 12.6inch Loading Container 20GP: 1341 cartons * 2 pcs = 2682 pcs 40HQ: 3115 cartons * 2 pcs = 6230 pcs

Read more less

Overview1. Infrared detection, eliminating the interferences of external stray light2. Schmitt trigger, stable wave form and signals3. Signal output indicator (while breaking the beam, outputs low level, the indicator lights up)Specifications1. Power: 3.3V ~ 5V2. Dimension: 26.8mm × 15mm × 18.7mm3. Mounting holes size: 3mm4. Gap width: 6mmApplications- Motor speed detection- Pulse counterHow to UseIn the case of working with a MCU:- VCC ? 3.3V ~ 5V- GND ? GND- DOUT ? MCU.IO (digital output)Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 4cm / 2.36inch * 1.57inch * 1.57inch Qty per Carton 1000 Carton Weight 10.00kgs / 22.05lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1000 pcs = 277000 pcs 40HQ: 644 cartons * 1000 pcs = 644000 pcs

Read more less

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B (not included). It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 18cm * 6cm * 15cm / 7.09inch * 2.36inch * 5.91inch Qty per Carton 36 Carton Weight 1.80kgs / 3.97lb Carton Size 54cm * 36cm * 30cm / 21.26inch * 14.17inch * 11.81inch Loading Container 20GP: 457 cartons * 36 pcs = 16452 pcs 40HQ: 1061 cartons * 36 pcs = 38196 pcs

Read more less

OverviewThis AlphaBot2 robot kit is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Ar, the upper adapter board for controller:1. Onboard Arduino interface, into which Arduino controller can be directly plugged2. 0.96inch 128x64 yellow/blue dual color OLED3. TLC1543 AD acquisition chip4. PC8574 I/O expander, avoid I/O shortage5. Xbee connector, for connecting dual-mode Bluetooth modulePackage Contents1. AlphaBot2-Ar (adapter board) x12. AlphaBot2-Base (base chassis) x13. Ultrasonic sensor x14. IR remote controller x15. FC-20P cable 8cm x16. USB type A plug to micro B plug cable x17. AlphaBot2-Ar screws x18. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 11cm * 9cm / 5.91inch * 4.33inch * 3.54inch Qty per Carton 48 Carton Weight 14.00kgs / 30.86lb Carton Size 60cm * 33cm * 36cm / 23.62inch * 12.99inch * 14.17inch Loading Container 20GP: 374 cartons * 48 pcs = 17952 pcs 40HQ: 868 cartons * 48 pcs = 41664 pcs

Read more less

Specifications1. Product: MG90S Servo2. Torque: 2.0kg/cm(4.8V), 2.8kg/cm(6V)3. Speed: 0.11s/60°(4.8V), 0.09s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: metal7. Dead band: 5us8. Weight: 12.2g9. Dimension: 22.8mm × 12.2mm × 28.5mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 7cm * 4cm * 6cm / 2.76inch * 1.57inch * 2.36inch Qty per Carton 480 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 36cm / 22.05inch * 15.75inch * 14.17inch Loading Container 20GP: 330 cartons * 480 pcs = 158400 pcs 40HQ: 767 cartons * 480 pcs = 368160 pcs

Read more less

1. Product: MG996R Servo2. Torque: 9kg/cm(4.8V), 11kg/cm(6V)3. Speed: 0.19s/60°(4.8V), 0.18s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: metal7. Dead band: 5us8. Weight: 55g9. Dimension: 40.7mm × 19.7mm × 42.9mmSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 7cm * 4cm / 3.94inch * 2.76inch * 1.57inch Qty per Carton 300 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 35cm * 40cm / 23.62inch * 13.78inch * 15.75inch Loading Container 20GP: 317 cartons * 300 pcs = 95100 pcs 40HQ: 736 cartons * 300 pcs = 220800 pcs

Read more less

1. 2.8 inch IPS screen, 640 x 480 pixels, 70% NTSC color gamut.2. Enjoys a smooth gaming experience with 60fps.3. Optical bonding toughened glass panel with anti-fingerprint technique.4. Compatible with Raspberry Pi Zero 2 W.5. Battery indicator light for checking the power of the game console easily.6. Update ROMs via WiFi.Specifications:1. Controller:- Raspberry Pi Zero 2 W-- BCM2710A1 quad-core 64-bit SoC (Arm Cortex-A53 @1GHz)-- 512MB LPDDR2 SDRAM-- 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE2. Display:- 2.8 inch IPS Screen-- 640 x 480 pixels-- Fully laminated toughened glass panel, anti-fingerprint technique-- 70% NTSC color gamut3. Battery: 1500 mAh4. Storage: 32G TF card5. Size: 136.4 x 67.5mmPackage List:1. GPM280 main unit x12. Assembled, with Raspberry Pi Zero 2 W and 32GB TF card3. Screwdriver x14. Power adapter 5V 3A x15. Card reader x16. Cleaning cloth x1Specification: Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 100 Carton Weight 27.50kgs / 60.63lb Carton Size 52cm * 42cm * 33cm / 20.47inch * 16.54inch * 12.99inch Loading Container 20GP: 370 cartons * 100 pcs = 37000 pcs 40HQ: 858 cartons * 100 pcs = 85800 pcs

Read more less

1. 2.8 inch IPS screen, 640 x 480 pixels, 70% NTSC color gamut.2. Enjoys a smooth gaming experience with 60fps.3. Optical bonding toughened glass panel with anti-fingerprint technique.4. Compatible with Raspberry Pi Zero 2 W.5. Battery indicator light for checking the power of the game console easily.6. Update ROMs via WiFi.Specifications:1. Controller:- Raspberry Pi Zero 2 W-- BCM2710A1 quad-core 64-bit SoC (Arm Cortex-A53 @1GHz)-- 512MB LPDDR2 SDRAM-- 2.4GHz IEEE 802.11b/g/n Wireless LAN, Bluetooth 4.2, BLE2. Display:- 2.8 inch IPS Screen-- 640 x 480 pixels-- Fully laminated toughened glass panel, anti-fingerprint technique-- 70% NTSC color gamut3. Battery: 1500 mAh4. Storage: 32G TF card5. Size: 136.4 x 67.5mmPackage List:1. GPM280 main unit x12. Assembled, with Raspberry Pi Zero 2 W and 32GB TF card3. Screwdriver x14. Power adapter 5V 3A x15. Card reader x16. Cleaning cloth x1Specification: Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 100 Carton Weight 27.50kgs / 60.63lb Carton Size 52cm * 42cm * 33cm / 20.47inch * 16.54inch * 12.99inch Loading Container 20GP: 370 cartons * 100 pcs = 37000 pcs 40HQ: 858 cartons * 100 pcs = 85800 pcs

Read more less

1. Applied to touch sensors such as buttons, sliders and wheels2. Application scenarios: car control panels, LCD TVs and monitors, notebook computers, mobile phones, etc.3. The single-chip microcomputer integrates Atmels AVR microcontroller, and includes 1KB to 4KB of flash memory, with 32 KB to 256 KB of SRAM4. The device supports SPI and TWI (I2C-compatible) communication, providing high flexibility and working voltage from 1.8V to 5.5V5. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used6. Size: 24x18mm7. Model: ATTINY85 MICRO blue boardSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 300 pcs = 169800 pcs 40HQ: 1314 cartons * 300 pcs = 394200 pcs

Read more less

1. Get 51 Arduino STM32 microcontroller routine.2. With a USB interface, you can watch the computer positioning effect directly phone line.3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.4. With SMA interface can be directly connected to an active antenna SMA.5. TTL level, compatible with 3.3V/5V systems.(Size: 39 x 25.5mm)6. Frequency: 1575.42MHz7. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely usedSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 6cm * 3cm / 2.36inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 200 pcs = 344200 pcs 40HQ: 3996 cartons * 200 pcs = 799200 pcs

Read more less

1. No need to write Ethernet underlying code to implement TCP/IP protocol stack2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing3. Support 10/100MBPS transfer rate4. Support 8 independent ports working at the same time5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the "client", "server" and "UDP" three working modes, as well as a detailed manual10. Chip model: W550011. Input voltage: 3.3-5v12. Size: about 55 x 28mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

1. The sensor module has strong adaptability to ambient light. It has a pair of infrared emitting and receiving tubes. The emitting tube emits a certain frequency of infrared rays. When the detection direction encounters an obstacle (reflecting surface), the infrared rays are reflected back by the receiving tube After receiving and processing by the comparator circuit, the green indicator light will light up, and the signal output interface will output a digital signal (a low-level signal). The detection distance can be adjusted by the potentiometer knob. The effective distance range is 2-30cm, and the working voltage is 3.3. V-5V.2. The detection distance of the sensor can be adjusted by a potentiometer, which has the characteristics of low interference, easy assembly, and convenient use.3. Widely used in many occasions such as robot obstacle avoidance, obstacle avoidance trolley, assembly line counting and black and white line tracking.4. The output port OUT of the sensor module can be directly connected to the IO port of the single-chip microcomputer, or it can directly drive a 5V relay; connection mode: VCC-VCC; GND-GND; OUT-IO5. The comparator adopts LM393, which works stably;6. The module can be powered by 3-5V DC power supply. When the power is turned on, the red power indicator lights up;7. With 3mm screw hole, easy to fix and install;8. Circuit board size: 3.2CM x 1.4CM9. Module interface description-VCC external 3.3V-5V voltage (can be directly connected with 5v single-chip microcomputer and 3.3v single-chip microcomputer)-GND External GND-OUT small board digital output interface (0 and 1)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 36cm * 37cm / 20.47inch * 14.17inch * 14.57inch Loading Container 20GP: 385 cartons * 100 pcs = 38500 pcs 40HQ: 893 cartons * 100 pcs = 89300 pcs

Read more less

1. On-board MAX485 chip, suitable for RS-485 communication, low power consumption, limited swing rate transceiver2. 5.08 (mm) pitch 2P terminal block on board, convenient RS-485 communication wiring3. Chip all the pins have been cited, you can control the operation through the microcontroller4. Operating voltage: 5V5. Weight: about 4.2 g6. Board size: about 5.5 x 2.5 cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 4.70kgs / 10.36lb Carton Size 52cm * 34cm * 32cm / 20.47inch * 13.39inch * 12.6inch Loading Container 20GP: 471 cartons * 120 pcs = 56520 pcs 40HQ: 1094 cartons * 120 pcs = 131280 pcs

Read more less

Product features:1. Adopts FT232BL chip with external EEPRON (93C46)2. Support Windows 103. Support 3 power supply modes: 5V external power supply, 3.3V external power supply, external power supply (requires 3.3V-5V)4. With 3 LEDs: TXD LED, RXD LED, POWER LED5. GND, RXD, TXD, 3V3, 5V: using a curved pin pin out6. The rest of the function PIN: reserved pads CTS, RTSInstructions for use: (to access the MCU as an example)1. GND: connected to GND2. RXD: connect to MCU.TX (Signal flow: MCU.TX - FT232 - PC.RX)3. TXD: connect to MCU.RX (signal flow: PC.TX - FT232 - MCU.RX)4. 3V3/5V: output 3.3V or 5V (the module is powered by USB, the jumper cap must be jumped to 3.3V or 5V)5. RTS: connect to MCU.CTS (signal flow: PC.RTS - FT232 - MCU.CTS)6. CTS: connect to MCU.RTS (Signal flow: MCU.RTS - FT232 - PC.CTS)Specification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 450 Carton Weight 21.40kgs / 47.18lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 450 pcs = 225000 pcs 40HQ: 1162 cartons * 450 pcs = 522900 pcs

Read more less

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs 40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

Features1. 4-pin SWIM Port for programming or testing2. External crystal can be connected via on board socket3. All the MCU pins are accessible on expansion connectorsSupported DevicesSTM8 microcontroller in QFP64(0.5mm pitch) package with compatible pinouts- STM8S207RxTx / STM8S208RxTx- STM8Ax51x9T / STM8Ax52x9T / STM8Ax61x9T / STM8Ax62x9TPhotos1. External crystal socket- Insert crystal to the holes on two sides, regardless of the middle hole2. SWIM port- For programming/debugging/testing- Compatible with ST-LINK, ST-LINK/V2, etc.3. Pin headers connected to MCU pins- Clearly labeled with onboard marks- Easy for testing and further expansion4. Power indicator5. Power input- DC5V/3.3VPackage Contents1. STM8-QFP64-0.5 × 12. USB power cable × 1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs 40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

OverviewOpen8S208Q80 is a STM8 development board that features a STM8S208MB device as the microcontroller. It supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM8 microcontroller.What is On Board1. STM8S208MB:the high performance STM8 MCU which features:- Core: 8-bit- Operating Frequency: 24 MHz(20 MIPS) Max- Operating Voltage: 2.7-5.5V- Package: LQFP80- I/Os: 68- Memories: 128kB Flash, 6kB SRAM, 2kB EEPROM- Communication Interfaces: 1 x SPI, 1 x I2C, 2 x UART, 1 x CAN, 12 x PWM, 16 x ADC- Debugging/Programming: SWIM2. AMS1117-3.3: 3.3V voltage regulator3. Power switch4. Power indicator5. LEDs: Convenient for indicating I/O status and/or program running state6. Reset button7. User keys: For I/O input test and/or program control8. Joystick: Five positions9. 8M crystal oscillator10. Adjustable resistor: For LCD12864 contrast adjustment11. UART1 interface: For connecting UART peripherals, such as RS232, RS485, USB TO UART, etc.12. CAN interface: For connecting CAN modules13. PS/2 interface: For connecting PS/2 devices, such as keyboard and/or mouse14. SPI interface: For connecting SPI peripherals, such as DataFlash (AT45DBxx), SD card, MP3, etc.15. 16 I/Os interface: For connecting accessory boards which using I/O control, such as FT245 USB FIFO, 8 SEG LED, etc.16. IC interface: For connecting I2C peripherals, such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.17. UART3 interface: For connecting UART peripherals, such as RS232, RS485, USB TO UART, etc.18. Graphic multi-color LCD interface: For connecting 2.2 inch multi-color touch screen LCD which using SPI control19. Graphic dot-matrix LCD interface: For connecting graphic LCDs such as LCD1286420. 1-WIRE interface: V connecting 1-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.21. 5V DC jack22. Custom crystal socket23. VCC power input/output: Usually used as power output, also common-grounding with other user board24. MCU pins connector: All the MCU pins are accessible on expansion connectors for further expansion25. SWIM interface: For debugging/programming26. User keys jumper27. Joystick jumper28. 1-WIRE jumper29. LEDs jumper30. PS/2 jumper31. LCD interface selection jumper- Short the jumper for dot-matrix LCD- Open the jumper for multi-color LCD32. VDD selection jumper33. Crystal selection jumper34. VREF selection jumper35. For jumpers 26-30:- Short the jumper to connect to I/Os used in example code;- Open the jumper to connect to other custom pins via jumper wires.Package Contents1. Open8S208Q80 development board x 12. 4-pin wire x 23. 2-pin wire x 24. USB power cable x 15. User guide CD x 1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 14.00kgs / 30.86lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs 40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

1. Type: Test block2. Working frequency: High frequency3. Application: integrated circuit IC4. Interface type: Terminal5. Production process: Injection molding6. Features: Stable testing7. Contact material: Beryllium copper shrapnel8. Insulator material: PET9. Number of cores: 3810. Purpose: Programming socket, test socket, to test, read and write the IC chip of EMCP22111. Lead spacing: 0.5mm12. Service life: 100,000 times13. Chip size: 11.5x13cmTesting Method:1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test programFeatures:1. Also compatible with 186-FBGA 162-FBGA2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.3. Support hot plugging and separate power switch, support for testing through USB interface or connection with the board on the board according to the PIN4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter boardSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 12cm * 6cm / 5.91inch * 4.72inch * 2.36inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs 40HQ: 458 cartons * 500 pcs = 229000 pcs

Read more less

1. Product use: Programming socket, test socket, programming and testing of QFP48 IC chips2. Applicable packages: QFP48, PQFP48, QFP48, pin pitch 0.5 mm3. Features: All pins are led out in the order of the chip4. Pin spacing: 0.5 mm5. Foot position: 486. Chip size: 7x7 mm (with pins 9x9 mm)Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 37cm * 22cm / 20.47inch * 14.57inch * 8.66inch Loading Container 20GP: 630 cartons * 500 pcs = 315000 pcs 40HQ: 1462 cartons * 500 pcs = 731000 pcs

Read more less

Features:1. Using double contact technology, the contact is more stable;2. The seat shell is made of special engineering plastic, which has high strength and long life;3. The shrapnel adopts imported beryllium copper material, which has low impedance and good elasticity;4. Thick gold-plated layer, thick electroplating of contacts, ultra-low contact impedance and high reliability; Product performance:1. Material: insulator PEI, PPS; shrapnel, beryllium copper Be Cu Gold plating (30u), Over Nickel plating (50u)2. Insulation resistance: 1000mohm, At DC 500V3. Withstand voltage: 700AC/1Minute4. Contact impedance: less than 25mohm5. PIN foot elasticity: 55g/PIN(Normal)6. Working temperature: minus 65-155 degrees Celsius7. Specifications and dimensions: pin spacing: 0.65 mm, pin position: 8, adaptable chip body width: 4.4 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 200 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 42cm * 30cm / 20.47inch * 16.54inch * 11.81inch Loading Container 20GP: 407 cartons * 200 pcs = 81400 pcs 40HQ: 944 cartons * 200 pcs = 188800 pcs

Read more less

Performance Parameters:1. Working frequency: low frequency2. Application range: integrated circuit IC3. Interface type: probe4. Probe material: beryllium copper (standard)5. Insulation material: FR-4, PPS, etc.Features:1. It adopts manual flip structure, which is easy to operate;2. The product has a high degree of universality. As long as the limit frame is changed, all SD cards with the same pins and different dimensions can be tested;3. The pressure plate of the upper cover adopts a special structure, and the downward pressure is stable to ensure that the pressure of the SD card is uniform and does not shift;4. The high-precision positioning slot ensures accurate positioning of the SD card and high production efficiency;5. Equipped with different main detection boards, can realize the interchangeability of Chipsbank, UT165, Anguo, SMI, NETWORK solutions6. The probe can be replaced, the maintenance is convenient, and the cost is low;Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 6cm / 5.12inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 6.50kgs / 14.33lb Carton Size 45cm * 40cm * 35cm / 17.72inch * 15.75inch * 13.78inch Loading Container 20GP: 423 cartons * 50 pcs = 21150 pcs 40HQ: 982 cartons * 50 pcs = 49100 pcs

Read more less