Electronics Modules

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. On-chip stacked 32MB PSRAM, externally integrated 32MB Nor Flash5. On-board interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Meets multimedia development requirements for low cost, high performance, and low power consumption9. Onboard ESP32-C6 chip extends ESP32-P4 with 2.4GHz Wi-Fi 6 and Bluetooth 5/BLE. Communicates via SDIO interface protocol for stable connections and efficient data transfer10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeekESP32-P4-WIFI6-KIT-B Package Contents:- ESP32-P4-WIFI6-M x 1- 10.1-inch display x 1- Speaker x 1- Camera x 1- FFC 15-pin ribbon cable x 1- Pi5-Camera-Cable-200mm x 1- MX1.25 4-pin to USB x 1- DSI ribbon cable x 1- FFC 22-pin ribbon cable x 2- MX1.25 2-pin to 2.54mm 3-pin x 1- MX1.25 2-pin to MX1.25 4-pin x 1- Copper pillar package x 4Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 4cm * 3cm / 3.54inch * 1.57inch * 1.18inch Qty per Carton 512 Carton Weight 17.00kgs / 37.48lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 512 pcs = 210944 pcs 40HQ: 958 cartons * 512 pcs = 490496 pcs

Read more less

1. Adopts ESP32-S3-WROOM series module, equipped with Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz 2. 512KB SRAM and 384KB ROM integrated, PSRAM and Flash memory versions available 3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication for superior RF performance4. Type-C interface, no need to worry about plugging it in backwards 5. CH343 and CH334 chips on board, through a Type-C interface can meet the needs of USB and UART development. 6. Lead to a wealth of peripheral interfaces, pin-compatible with the ESP32-S3-DevKitC-1 development board, compatibility and scalability 7. Stamp hole design, can be directly soldered and integrated into the independent design of the base plate 8. Supports a variety of low-power operating state, can adjust the balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios9. Size: about 6.33 x 2.54cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 20.20kgs / 44.53lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Adopts ESP32-S3-WROOM series module, equipped with Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz 2. 512KB SRAM and 384KB ROM integrated, PSRAM and Flash memory versions available 3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication for superior RF performance4. Type-C interface, no need to worry about plugging it in backwards 5. CH343 and CH334 chips on board, through a Type-C interface can meet the needs of USB and UART development. 6. Lead to a wealth of peripheral interfaces, pin-compatible with the ESP32-S3-DevKitC-1 development board, compatibility and scalability 7. Stamp hole design, can be directly soldered and integrated into the independent design of the base plate 8. Supports a variety of low-power operating state, can adjust the balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios9. Size: about 6.33 x 2.54cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 20.20kgs / 44.53lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. On-chip stacked 32MB PSRAM, externally integrated 32MB Nor Flash5. On-board interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Meets multimedia development requirements for low cost, high performance, and low power consumption9. Onboard ESP32-C6 chip extends ESP32-P4 with 2.4GHz Wi-Fi 6 and Bluetooth 5/BLE. Communicates via SDIO interface protocol for stable connections and efficient data transfer10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeekESP32-P4-WIFI6-KIT-B Package Contents:- ESP32-P4-WIFI6-M x 1- 10.1-inch display x 1- Speaker x 1- Camera x 1- FFC 15-pin ribbon cable x 1- Pi5-Camera-Cable-200mm x 1- MX1.25 4-pin to USB x 1- DSI ribbon cable x 1- FFC 22-pin ribbon cable x 2- MX1.25 2-pin to 2.54mm 3-pin x 1- MX1.25 2-pin to MX1.25 4-pin x 1- Copper pillar package x 4Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 9cm * 4cm * 3cm / 3.54inch * 1.57inch * 1.18inch Qty per Carton 512 Carton Weight 20.00kgs / 44.09lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 512 pcs = 210944 pcs 40HQ: 958 cartons * 512 pcs = 490496 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB high-performance ROM, 16KB low-power ROM, 768KB high-performance secondary storage, 32KB low-power SRAM, 8KB register cache3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with externally integrated 32MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 pin headers provide 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Supports hardware access protection for Access Permission Management (APM) and privilege separation8. Flexible power supply options: Supports both PoE and USB Type-C interface power solutions9. Supports PoE module integration, enabling networked power delivery via a single Ethernet cable to PoE devices10. Supports mainstream AI platforms, enabling integration with online large-model platforms such as Doubao and DeepSeek AI modelsESP32-P4-POE-ETH-KIT-B package contents:- ESP32-P4-ETH-M x 1- 10.1-DSI-TOUCH-A x 1- PoE module x 1- Screw pack x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-Pin flat cable x 1- RPi Camera (B) x 1- MX1.25 4-Pin to USB Cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin approx. 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin about 150mm x 1- Copper pillar package x 1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 4cm * 3cm / 3.54inch * 1.57inch * 1.18inch Qty per Carton 512 Carton Weight 17.00kgs / 37.48lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 512 pcs = 210944 pcs 40HQ: 958 cartons * 512 pcs = 490496 pcs

Read more less

1. Single-core ARM Cortex-A7 32-bit CPU with integrated NEON and FPU2. RV1106G3 features Rockchip proprietary 4th-generation NPU, delivering high computational precision with support for mixed quantization of int4, int8, and int16. Its int8 computing power reaches 1 TOPS.3. Integrated proprietary 3rd-generation ISP3.2 supporting 8MP resolution, with HDR, WDR, and multi-level noise reduction among various image enhancement and correction algorithms4. Powerful encoding performance with intelligent encoding that adapts to scenes to reduce bitrate, achieving over 50% savings compared to conventional CBR mode. Enables high-definition capture with significantly smaller video file sizes5. Integrated 16-bit 256MB DDR3L DRAM meets demanding memory bandwidth requirements6. Onboard 2.4GHz Wi-Fi 6 and Bluetooth 5.2 (LE) modules ensure stable connectivity and efficient data transfer7. Flexible switching between external antennas and onboard surface-mount antennas accommodates diverse application scenarios8. Surface-mount microphone + speaker interface for audio applications9. Features a MIPI CSI 4-lane interface composed of two MIPI-CSI (2-lane) channels10. Suitable for diverse applications including smart home devices, industrial automation equipment, smart display devices, robotics, intelligent transportation systems, and new retail solutions11. Size: about 6.5 x 3cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 432 Carton Weight 23.00kgs / 50.71lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 432 pcs = 189648 pcs 40HQ: 1019 cartons * 432 pcs = 440208 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB high-performance ROM, 16KB low-power ROM, 768KB high-performance secondary storage, 32KB low-power SRAM, 8KB register cache3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with externally integrated 32MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 pin headers provide 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Supports hardware access protection for Access Permission Management (APM) and privilege separation8. Flexible power supply options: Supports both PoE and USB Type-C interface power solutions9. Supports PoE module integration, enabling networked power delivery via a single Ethernet cable to PoE devices10. Supports mainstream AI platforms, enabling integration with online large-model platforms such as Doubao and DeepSeek AI modelsESP32-P4-POE-ETH-KIT-B package contents:- ESP32-P4-ETH-M x 1- 10.1-DSI-TOUCH-A x 1- PoE module x 1- Screw pack x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-Pin flat cable x 1- RPi Camera (B) x 1- MX1.25 4-Pin to USB Cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin approx. 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin about 150mm x 1- Copper pillar package x 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 112 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 37cm * 34cm / 19.69inch * 14.57inch * 13.39inch Loading Container 20GP: 423 cartons * 112 pcs = 47376 pcs 40HQ: 984 cartons * 112 pcs = 110208 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. Chip-on-chip stacked 32MB PSRAM, module integrates 16MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminal6. On-board 2 × 20 pin headers expose 28 additional programmable GPIO pins7. Security Mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Onboard ESP32-C6 chip (ESP32-P4-WIFI6-DEV-KIT) extends 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE) capabilities, communicating via SDIO protocol for stable connections and efficient data transfer9. Reserved PoE module interface enables flexible power supply options for the development board10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeek AI modelsESP32-P4-WIFI6-DEV-KIT-B package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 7-DSI-TOUCH-A touchscreen x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI cable (12cm) x 1- FFC 22-pin cable x 2- MX1.25 2-pin to SH1.0 2-pin cable (about 80mm) x 1- MX1.25 2-pin to 2.54mm 3-pin cable (about 110mm) x 1- MX1.25 2-pin to MX1.25 4-pin cable (about 150mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin connector cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1ESP32-P4-WIFI6-DEV-KIT-C package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 10.1-DSI-TOUCH-A x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI-Cable-12cm x 1- FFC 22PIN flex cable x 2- MX1.25 2PIN to SH1.0 2PIN adapter cable (about 80mm) x 1- MX1.25 2PIN to 2.54 3PIN adapter cable (about 110mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 144 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs 40HQ: 958 cartons * 144 pcs = 137952 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. Chip-on-chip stacked 32MB PSRAM, module integrates 16MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminal6. On-board 2 × 20 pin headers expose 28 additional programmable GPIO pins7. Security Mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Onboard ESP32-C6 chip (ESP32-P4-WIFI6-DEV-KIT) extends 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE) capabilities, communicating via SDIO protocol for stable connections and efficient data transfer9. Reserved PoE module interface enables flexible power supply options for the development board10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeek AI modelsESP32-P4-WIFI6-DEV-KIT-B package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 7-DSI-TOUCH-A touchscreen x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI cable (12cm) x 1- FFC 22-pin cable x 2- MX1.25 2-pin to SH1.0 2-pin cable (about 80mm) x 1- MX1.25 2-pin to 2.54mm 3-pin cable (about 110mm) x 1- MX1.25 2-pin to MX1.25 4-pin cable (about 150mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin connector cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1ESP32-P4-WIFI6-DEV-KIT-C package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 10.1-DSI-TOUCH-A x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI-Cable-12cm x 1- FFC 22PIN flex cable x 2- MX1.25 2PIN to SH1.0 2PIN adapter cable (about 80mm) x 1- MX1.25 2PIN to 2.54 3PIN adapter cable (about 110mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 20cm * 14cm * 8cm / 7.87inch * 5.51inch * 3.15inch Qty per Carton 144 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 30cm * 22cm / 19.69inch * 11.81inch * 8.66inch Loading Container 20GP: 808 cartons * 144 pcs = 116352 pcs 40HQ: 1875 cartons * 144 pcs = 270000 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with an additional 32MB Nor Flash integrated externally5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for implementing Access Permission Management (APM) and privilege separation8. Highly integrated, powerful performance. Development board uses ESP32-P4 chip with 32MB Nor Flash onboard9. Size: about 5.73 x 2.1cmESP32-P4-Pico-KIT-B package contents:- ESP32-P4-Pico-M x 1- 10.1-DSI-TOUCH-A x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-pin ribbon cable x 1- RPi Camera (B) x 1- MX1.25 4-pin to USB cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin jumper cable x 1- FFC cable 22PIN about 200mm (opposite direction) x 2- MX1.25 2PIN to MX1.25 4PIN about 150mm x 1- Copper pillar pack x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 432 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 432 pcs = 189648 pcs 40HQ: 1019 cartons * 432 pcs = 440208 pcs

Read more less

1. Adopts ESP32-S3-WROOM series module, equipped with Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz 2. 512KB SRAM and 384KB ROM integrated, PSRAM and Flash memory versions available 3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication for superior RF performance4. Type-C interface, no need to worry about plugging it in backwards 5. CH343 and CH334 chips on board, through a Type-C interface can meet the needs of USB and UART development. 6. Lead to a wealth of peripheral interfaces, pin-compatible with the ESP32-S3-DevKitC-1 development board, compatibility and scalability 7. Stamp hole design, can be directly soldered and integrated into the independent design of the base plate 8. Supports a variety of low-power operating state, can adjust the balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios9. Size: about 6.33 x 2.54cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 20.20kgs / 44.53lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Adopts ESP32-S3-WROOM series module, equipped with Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz 2. 512KB SRAM and 384KB ROM integrated, PSRAM and Flash memory versions available 3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication for superior RF performance4. Type-C interface, no need to worry about plugging it in backwards 5. CH343 and CH334 chips on board, through a Type-C interface can meet the needs of USB and UART development. 6. Lead to a wealth of peripheral interfaces, pin-compatible with the ESP32-S3-DevKitC-1 development board, compatibility and scalability 7. Stamp hole design, can be directly soldered and integrated into the independent design of the base plate 8. Supports a variety of low-power operating state, can adjust the balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios9. Size: about 6.33 x 2.54cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 20.20kgs / 44.53lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Adopts ESP32-S3-WROOM series module, equipped with Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240MHz 2. 512KB SRAM and 384KB ROM integrated, PSRAM and Flash memory versions available 3. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication for superior RF performance4. Type-C interface, no need to worry about plugging it in backwards 5. CH343 and CH334 chips on board, through a Type-C interface can meet the needs of USB and UART development. 6. Lead to a wealth of peripheral interfaces, pin-compatible with the ESP32-S3-DevKitC-1 development board, compatibility and scalability 7. Stamp hole design, can be directly soldered and integrated into the independent design of the base plate 8. Supports a variety of low-power operating state, can adjust the balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios9. Size: about 6.33 x 2.54cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 20.20kgs / 44.53lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. Chip-on-chip stacked 32MB PSRAM, module integrates 16MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminal6. On-board 2 × 20 pin headers expose 28 additional programmable GPIO pins7. Security Mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Onboard ESP32-C6 chip (ESP32-P4-WIFI6-DEV-KIT) extends 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE) capabilities, communicating via SDIO protocol for stable connections and efficient data transfer9. Reserved PoE module interface enables flexible power supply options for the development board10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeek AI modelsESP32-P4-WIFI6-DEV-KIT-B package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 7-DSI-TOUCH-A touchscreen x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI cable (12cm) x 1- FFC 22-pin cable x 2- MX1.25 2-pin to SH1.0 2-pin cable (about 80mm) x 1- MX1.25 2-pin to 2.54mm 3-pin cable (about 110mm) x 1- MX1.25 2-pin to MX1.25 4-pin cable (about 150mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin connector cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1ESP32-P4-WIFI6-DEV-KIT-C package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 10.1-DSI-TOUCH-A x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI-Cable-12cm x 1- FFC 22PIN flex cable x 2- MX1.25 2PIN to SH1.0 2PIN adapter cable (about 80mm) x 1- MX1.25 2PIN to 2.54 3PIN adapter cable (about 110mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 26cm * 17cm * 8cm / 10.24inch * 6.69inch * 3.15inch Qty per Carton 12 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 36cm * 28cm / 19.69inch * 14.17inch * 11.02inch Loading Container 20GP: 529 cartons * 12 pcs = 6348 pcs 40HQ: 1228 cartons * 12 pcs = 14736 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with an additional 32MB Nor Flash integrated externally5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for implementing Access Permission Management (APM) and privilege separation8. Highly integrated, powerful performance. Development board uses ESP32-P4 chip with 32MB Nor Flash onboard9. Size: about 5.73 x 2.1cmESP32-P4-Pico-KIT-B package contents:- ESP32-P4-Pico-M x 1- 10.1-DSI-TOUCH-A x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-pin ribbon cable x 1- RPi Camera (B) x 1- MX1.25 4-pin to USB cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin jumper cable x 1- FFC cable 22PIN about 200mm (opposite direction) x 2- MX1.25 2PIN to MX1.25 4PIN about 150mm x 1- Copper pillar pack x 1Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 84 Carton Weight 12.00kgs / 26.46lb Carton Size 44cm * 37cm * 34cm / 17.32inch * 14.57inch * 13.39inch Loading Container 20GP: 481 cartons * 84 pcs = 40404 pcs 40HQ: 1118 cartons * 84 pcs = 93912 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with an additional 32MB Nor Flash integrated externally5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for implementing Access Permission Management (APM) and privilege separation8. Highly integrated, powerful performance. Development board uses ESP32-P4 chip with 32MB Nor Flash onboard9. Size: about 5.73 x 2.1cmESP32-P4-Pico-KIT-B package contents:- ESP32-P4-Pico-M x 1- 10.1-DSI-TOUCH-A x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-pin ribbon cable x 1- RPi Camera (B) x 1- MX1.25 4-pin to USB cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin jumper cable x 1- FFC cable 22PIN about 200mm (opposite direction) x 2- MX1.25 2PIN to MX1.25 4PIN about 150mm x 1- Copper pillar pack x 1Specification: Package Weight One Package Weight 0.52kgs / 1.16lb One Package Size 24cm * 16cm * 6cm / 9.45inch * 6.3inch * 2.36inch Qty per Carton 24 Carton Weight 14.00kgs / 30.86lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 24 pcs = 9888 pcs 40HQ: 958 cartons * 24 pcs = 22992 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB high-performance ROM, 16KB low-power ROM, 768KB high-performance secondary storage, 32KB low-power SRAM, 8KB register cache3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with externally integrated 32MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 pin headers provide 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Supports hardware access protection for Access Permission Management (APM) and privilege separation8. Flexible power supply options: Supports both PoE and USB Type-C interface power solutions9. Supports PoE module integration, enabling networked power delivery via a single Ethernet cable to PoE devices10. Supports mainstream AI platforms, enabling integration with online large-model platforms such as Doubao and DeepSeek AI modelsESP32-P4-POE-ETH-KIT-B package contents:- ESP32-P4-ETH-M x 1- 10.1-DSI-TOUCH-A x 1- PoE module x 1- Screw pack x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-Pin flat cable x 1- RPi Camera (B) x 1- MX1.25 4-Pin to USB Cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin approx. 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin about 150mm x 1- Copper pillar package x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 16cm * 8cm * 6cm / 6.3inch * 3.15inch * 2.36inch Qty per Carton 64 Carton Weight 14.00kgs / 30.86lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 64 pcs = 29504 pcs 40HQ: 1071 cartons * 64 pcs = 68544 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. Chip-on-chip stacked 32MB PSRAM, module integrates 16MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminal6. On-board 2 × 20 pin headers expose 28 additional programmable GPIO pins7. Security Mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation8. Onboard ESP32-C6 chip (ESP32-P4-WIFI6-DEV-KIT) extends 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE) capabilities, communicating via SDIO protocol for stable connections and efficient data transfer9. Reserved PoE module interface enables flexible power supply options for the development board10. Supports mainstream AI platforms, enabling integration with online large-model platforms like Doubao and DeepSeek AI modelsESP32-P4-WIFI6-DEV-KIT-B package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 7-DSI-TOUCH-A touchscreen x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI cable (12cm) x 1- FFC 22-pin cable x 2- MX1.25 2-pin to SH1.0 2-pin cable (about 80mm) x 1- MX1.25 2-pin to 2.54mm 3-pin cable (about 110mm) x 1- MX1.25 2-pin to MX1.25 4-pin cable (about 150mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin connector cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1ESP32-P4-WIFI6-DEV-KIT-C package contents:- ESP32-P4-WIFI6-DEV-KIT x 1- 10.1-DSI-TOUCH-A x 1- RPi Camera (B) x 1- 8 ohms 2W speaker x 1- FFC 15-pin cable x 1- MIPI-DSI-Cable-12cm x 1- FFC 22PIN flex cable x 2- MX1.25 2PIN to SH1.0 2PIN adapter cable (about 80mm) x 1- MX1.25 2PIN to 2.54 3PIN adapter cable (about 110mm) x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable (about 1m) x 1- SH1.0 4-Pin cable (about 150mm) x 2- Copper pillar pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 72 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 72 pcs = 31536 pcs 40HQ: 1018 cartons * 72 pcs = 73296 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with an additional 32MB Nor Flash integrated externally5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 header pins expose 27 additional programmable GPIOs7. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for implementing Access Permission Management (APM) and privilege separation8. Highly integrated, powerful performance. Development board uses ESP32-P4 chip with 32MB Nor Flash onboard9. Size: about 5.73 x 2.1cmESP32-P4-Pico-KIT-B package contents:- ESP32-P4-Pico-M x 1- 10.1-DSI-TOUCH-A x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-pin ribbon cable x 1- RPi Camera (B) x 1- MX1.25 4-pin to USB cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin jumper cable x 1- FFC cable 22PIN about 200mm (opposite direction) x 2- MX1.25 2PIN to MX1.25 4PIN about 150mm x 1- Copper pillar pack x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 432 Carton Weight 23.00kgs / 50.71lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 432 pcs = 189648 pcs 40HQ: 1019 cartons * 432 pcs = 440208 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB high-performance ROM, 16KB low-power ROM, 768KB high-performance secondary storage, 32KB low-power SRAM, 8KB register cache3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with externally integrated 32MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 pin headers provide 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Supports hardware access protection for Access Permission Management (APM) and privilege separation8. Flexible power supply options: Supports both PoE and USB Type-C interface power solutions9. Supports PoE module integration, enabling networked power delivery via a single Ethernet cable to PoE devices10. Supports mainstream AI platforms, enabling integration with online large-model platforms such as Doubao and DeepSeek AI modelsESP32-P4-POE-ETH-KIT-B package contents:- ESP32-P4-ETH-M x 1- 10.1-DSI-TOUCH-A x 1- PoE module x 1- Screw pack x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-Pin flat cable x 1- RPi Camera (B) x 1- MX1.25 4-Pin to USB Cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin approx. 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin about 150mm x 1- Copper pillar package x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 9cm * 4cm * 3cm / 3.54inch * 1.57inch * 1.18inch Qty per Carton 512 Carton Weight 17.00kgs / 37.48lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 512 pcs = 210944 pcs 40HQ: 958 cartons * 512 pcs = 490496 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. 128KB high-performance ROM, 16KB low-power ROM, 768KB high-performance secondary storage, 32KB low-power SRAM, 8KB register cache3. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder4. 32MB PSRAM stacked within the chip package, with externally integrated 32MB NOR Flash5. On-board peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, and speaker terminals6. On-board 2 × 20 pin headers provide 27 additional programmable GPIOs7. Security mechanisms: Secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Supports hardware access protection for Access Permission Management (APM) and privilege separation8. Flexible power supply options: Supports both PoE and USB Type-C interface power solutions9. Supports PoE module integration, enabling networked power delivery via a single Ethernet cable to PoE devices10. Supports mainstream AI platforms, enabling integration with online large-model platforms such as Doubao and DeepSeek AI modelsESP32-P4-POE-ETH-KIT-B package contents:- ESP32-P4-ETH-M x 1- 10.1-DSI-TOUCH-A x 1- PoE module x 1- Screw pack x 1- 8 ohms 2W speaker x 1- Pi5-Camera-Cable-200mm x 1- FFC 15-Pin flat cable x 1- RPi Camera (B) x 1- MX1.25 4-Pin to USB Cable x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin approx. 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin about 150mm x 1- Copper pillar package x 1Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 26cm * 16cm * 6cm / 10.24inch * 6.3inch * 2.36inch Qty per Carton 16 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 26cm * 34cm / 19.69inch * 10.24inch * 13.39inch Loading Container 20GP: 603 cartons * 16 pcs = 9648 pcs 40HQ: 1400 cartons * 16 pcs = 22400 pcs

Read more less

1. Based on the ESP32-S3 microcontroller, featuring an integrated Xtensa 32-bit LX7 dual-core processor with a maximum clock speed of 240MHz2. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication with outstanding RF performance3. Output employs Darlington transistors with optocoupler isolation for enhanced drive capability, sink current up to 500mA, and built-in freewheeling diode protection4. Digital inputs feature bidirectional optocoupler isolation, supporting both passive and active inputs; digital outputs support switch-input interlock control mode5. On-board isolated RS485 interface facilitates expansion with various RS485 Modbus industrial modules or sensors6. On-board isolated CAN interface enables connection to diverse CAN devices7. On-board header pins allow integration with additional peripherals8. On-board USB Type-C port supports power delivery and debugging for convenient development9. On-board terminal block power supply interface supporting 7V to 36V wide voltage range for industrial power applications10. On-board RTC clock chip supporting scheduled tasks11. On-board W5500 Ethernet chip providing 10/100Mbps network connectivity via SPI interface12. On-board PoE module implements Ethernet power delivery (compliant with IEEE 802.3af standard)13. On-board optocoupler isolation prevents external circuit interference with control chips14. On-board digital isolation prevents external signal interference with control chips15. On-board integrated power isolation provides stable isolated voltage; isolated terminals require no additional power supply16. Onboard Micro SD card slot for external SD card storage of images or files17. Onboard buzzer, RGB indicator light, power indicator, RS485 transmit/receive indicator, and CAN indicator for easy monitoring of device operational status18. Rail-mount protective enclosure for convenient installation and enhanced safetyParameters1. Microcontroller: ESP32-S32. Wireless communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)3. USB interface:- Interface form: USB Type-C- Power supply voltage: 5V- USB interface functions: device power supply, USB communication, firmware download, etc.4. Isolated RS485 communication interface:- Interface form: terminal block- Direction control: automatic control set by the main control hardware flow- Interface protection: TVS diode protection, surge and static protection- Matching resistance: default NC, reserved 120R matching resistance, can be enabled by jumper cap5. Isolated CAN communication interface:- Interface form: terminal block- Direction control: hardware automatically determines and controls the data transmission direction- Interface protection: TVS diode protection, surge and static protection- Matching resistance: default NC, reserved 120R matching resistance, can be enabled by jumper cap6. Network port: PoE port, supports IEEE 802.3af standard7. Digital output:- Output channels: 8 channels- Input voltage range: 5V - 40V- Output type: open-collector output, output load 500mA/channel (MAX)- Isolation type: optocoupler isolation8. Digital input:- Input channels: 8 channels- Input voltage range: 5V - 36V- Input type: passive input / active input (NPN type or PNP type)- Isolation type: bidirectional optocoupler isolation9. Indicator lights- RGB: colorful cool light beads, can be customized to display colors- PWR: power indicator light, connected to USB, turns red when voltage is detected- TXD: transmission indicator light, turns green when data is sent from RS485/CAN interface- RXD: reception indicator light, turns blue when data is received from RS485/CAN interface10. Terminal power supply: power supply range: 7V - 36V11. Enclosure: DIN-rail mount protective enclosure12. Size: about 17.5 x 9 x 4cmSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 12cm * 8cm / 7.87inch * 4.72inch * 3.15inch Qty per Carton 34 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 38cm * 34cm / 16.54inch * 14.96inch * 13.39inch Loading Container 20GP: 491 cartons * 34 pcs = 16694 pcs 40HQ: 1140 cartons * 34 pcs = 38760 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 6 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 6 pcs = 3132 pcs 40HQ: 1213 cartons * 6 pcs = 7278 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs 40HQ: 1213 cartons * 4 pcs = 4852 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 5 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 5 pcs = 2610 pcs 40HQ: 1213 cartons * 5 pcs = 6065 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 6 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 6 pcs = 3132 pcs 40HQ: 1213 cartons * 6 pcs = 7278 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 5 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 5 pcs = 2610 pcs 40HQ: 1213 cartons * 5 pcs = 6065 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs 40HQ: 1213 cartons * 4 pcs = 4852 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs 40HQ: 1213 cartons * 4 pcs = 4852 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 6 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 6 pcs = 3132 pcs 40HQ: 1213 cartons * 6 pcs = 7278 pcs

Read more less

1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 5 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 5 pcs = 2610 pcs 40HQ: 1213 cartons * 5 pcs = 6065 pcs

Read more less

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 4.50kgs / 9.92lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs 40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 4.50kgs / 9.92lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs 40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

1. Communication distance (without interference or obstruction): 15KM MAX2. Channels: 13 physical channels; 16 communication channels3. Data transmission support for flight Controllers: Open-source flight controllers such as PIX, APM, etc.; Boying Paladin v2; Jiyi K3A Pro / K++; Weike Zhifei V7AG4. Video transmission support for ground stations: QGroundControl; MissionPlanner; Jiyi IFLY / Flight Control Manager; Boying Agriculture; Weike Zhifei V7Pro Ground Station5. 15KM wireless digital video transmission, dual-channel full HD video real-time display6. Lightweight handheld ground station equipped with a 5.5-inch high-definition high-brightness display, with a brightness of up to 1000 nits, still clearly displaying ground station information and high-definition video transmission images even in direct sunlight outdoors.7. Equipped with a qualcomm octa-core high-performance CPU, easily hard-decoding H.264/H.265, 1080P 60fps video streams, and capable of running various ground station software at high speed.8. Equipped with an R1M card recording high-definition camera interface, plug-and-play, real-time image reading, providing a wider and clearer field of view.Ground station1. Display device: 5.5-inch 1080P High-definition High-brightness LCD Touch Display2. System configuration: Android 9.0, 2G RAM, 16G Storage3. Dimensions: (Antenna folded) 189.09 x 137.95 x 69.72 (mm)4. Weight: 850g5. Battery capacity and type: 10200mAh, 7.4V 2S Lithium-ion battery6. Fast charging protocol: PD 20W7. Charging time: 5h (20W fast charging)8. Operating time: 13h9. Functional interfaces:- Charging: Type-C- Firmware upgrade: DATA (4PIN)- - Mobile network: SIM card slot- External storage: TF card slot- Tripod mount: 1/4 inch threaded hole- Video output: Standard HDMI- External RTK: DATA (4PIN)- External USB drive: USB-A10. Waterproof rating: IP53Package contents:- EyeLink-RC-S1 x 1- MK15 sky unit and omnidirectional antenna x 1- Range extender antenna x 1- USB upgrade data cable x 1- PWM and PIX flight controller data transmission cable x 1- R1M card recording HD camera x 1- PD Fast charging data cable with dual type-C ports x 1- Sky unit 8PIN connection cable x 1- 20W PD US standard fast charger x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 10cm / 8.66inch * 6.69inch * 3.94inch Qty per Carton 12 Carton Weight 12.50kgs / 27.56lb Carton Size 46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch Loading Container 20GP: 503 cartons * 12 pcs = 6036 pcs 40HQ: 1168 cartons * 12 pcs = 14016 pcs

Read more less

1. The CAN FD to RS232/RS485 converter is a DIN rail-mounted bidirectional CAN FD and RS232/RS485 conversion device. It features high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and serial devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design, supporting a wide voltage range of 9V to 36V, with an arbitration domain baud rate of 5Kbps to 1Mbps and a data domain baud rate of 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 85.6 (mm)6. Mounting method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicator lights: POWER, WORK, COM, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in two 120-ohm termination resistors. Setting any one DIP switch to ON connects one 120-ohm resistor in parallel; setting both to ON connects two 120-ohm resistors in parallel.13. Serial port specifications: supports one RS485 or RS232 connection14. Modbus gateway: CAN FD to modbus RTU (Master/Slave)15. Transmit messages: supports 64 transmit messages16. Receive messages: supports 64 receive messages17. Conversion modes: transparent conversion, transparent with ID conversion, standard conversion, modbus conversion, and custom frame header/trailer conversion18. CAN ID: supports standard frames and extended frames19. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)20. Conversion direction: supports bidirectional conversion, serial to CAN only, and CAN to serial only21. Firmware upgrade: supports firmware upgrade via PC software22. Parameter configuration: AT commands, PC software configuration23. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV24. Electrical fast transient/burst immunity: power supply circuit 2KV; RS485/RS232 circuit 1KV; CAN circuit 1KV25. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV; CAN circuit common mode 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs 40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs 40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. This product features a compact layout design, allowing space for the built-in cooling fan of the Raspberry Pi 5 official case when connecting a 2230 size M-key M.2 peripheral to the Raspberry Pi 5.2. Supports NVMe protocol M.2 interface hard drives, offering high-speed reading and writing for high work efficiency.3. PCI-E ×1 Gen2 or Gen3 mode.4. Only supports Raspberry Pi 5B and 2230 size M.2 hard drives.5. Onboard work indicator lights: PWR is always on when powered, ACT flashes during reading and writing, providing a clear indication of the working status.6. HAT+ design with onboard EEPROM chip.7. Extends the single-channel PCIe 2.0 interface of the Raspberry Pi 5 (speed approximately 500MB/s).8. Supports M.2 M-key devices, only supporting 2230 size M.2 hard drives.9. Provides 3A current to the connected M.2 hard drive.10. Complies with Raspberry Pi HAT+ specifications and can be automatically detected via firmware.11. Compact layout design allows installation between the Raspberry Pi USB ports and the built-in cooling fan and case cover, improving compatibility with the Raspberry Pi 5 official case.12. Onboard LED indicators for power and ACT status.13. Designed specifically for stacking with the built-in cooling fan of the Raspberry Pi 5 official case.14. Dimensions: 65x56.5mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 14.60kgs / 32.19lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs 40HQ: 1071 cartons * 192 pcs = 205632 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating concerns about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of wiring terminals, allowing for bottom or back wiring options, facilitating integration into various applications such as rail mounting or embedded systems.16. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs 40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. Made of aluminum alloy using CNC machining.2. Compact size, easy to carry.3. It can be used in various situations and is an indispensable tool for radio enthusiasts.4. Cast base design for stable and solid transmission, robust structure, and non-slip feet on the bottom.5. Carbon fiber paddles, smooth to the touch, insulated and static-free.6. Adjustable contact gap; the rear contact structure uses knurled screws for direct finger adjustment.7. Dual-sided damping adjustment: magnetic damping, adjustable in both directions.8. 3.5mm key interface.9. Dimensions: 127 x 60 x 45 mm10. Net weight: 955gSpecification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 16 Carton Weight 18.10kgs / 39.90lb Carton Size 44cm * 36cm * 30cm / 17.32inch * 14.17inch * 11.81inch Loading Container 20GP: 561 cartons * 16 pcs = 8976 pcs 40HQ: 1302 cartons * 16 pcs = 20832 pcs

Read more less

1. The CW dual-paddle automatic key is compact and easy to carry.2. Made of high-strength aluminum alloy, the key paddles have a very small gap between them, offering excellent durability and smoother operation.3. It can be used in various situations and is an essential tool for amateur radio enthusiasts and shortwave radio communication.4. Dimensions: 4.98 x 3.2 x 2 cm5. Package contents:- CW dual-paddle automatic key x 1- 3.5mm audio cable x 1- Adjustment tool x 1Specification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 8.40kgs / 18.52lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 54 pcs = 31914 pcs 40HQ: 1373 cartons * 54 pcs = 74142 pcs

Read more less

1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs 40HQ: 1040 cartons * 264 pcs = 274560 pcs

Read more less

1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs 40HQ: 1040 cartons * 264 pcs = 274560 pcs

Read more less

1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs 40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

1. The CAN FD TO ETH is a DIN rail-mounted CAN FD to Ethernet device, featuring high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and Ethernet devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design for stable operation and supports a wide voltage range of 9V to 36V. The arbitration domain baud rate is 5Kbps to 1Mbps, and the data domain baud rate is 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 76.1 (mm)6. Installation method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicators: POWER, WORK, NET, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps;11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in 2 CAN bus 120-ohm termination resistors. The resistors are connected via DIP switches. Setting any one DIP switch to ON connects one 120-ohm resistor; setting both DIP switches to ON connects two 120-ohm resistors in parallel.13. Network port specifications: RJ45, 10/100Mbps, auto-negotiation for crossover/straight-through cables14. Network protocols: TCP server, TCP client, UDP server, and UDP client15. Modbus gateway: CAN FD to ModbusTCP (Master/Slave)16. Transmit messages: supports configuring up to 64 transmit messages17. Receive messages: supports configuring up to... 64 received messages18. Conversion modes: transparent conversion, Transparent conversion with ID, Standard conversion, Modbus conversion, and Custom frame header and footer conversion19. CAN ID: supports standard frames and extended frames20. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)21. Packet frame number and time: supports custom packet frame number and custom packet time22. Conversion direction: supports bidirectional conversion, Ethernet to CAN only, and CAN to Ethernet only23. Firmware upgrade: supports firmware upgrade via PC software24. Parameter configuration: AT commands, PC software configuration25. Other functions: supports heartbeat packets, registration packets, normal, loopback, and listen-only operating modes26. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV27. Electrical fast transient/burst: power supply circuit 2KV, Ethernet and CAN port circuits 1KV28. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV, CAN circuit common mode 2KV, Ethernet circuit 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs 40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. Stall torque: 19.5 kg.cm @ 7.4V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 4V ~ 7.4V6. Gear type: high-precision metal gears7. No-load speed: 0.192 sec / 60 degrees (52 RPM) @ 7.4V8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, load, speed, and12. Input voltage13. No-load current: 150mA14. Stall current: 2.5A15. Kt constant: 7.8 kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build robotic projects requiring multiple servos, such as quadruped robots, hexapod robots, and robotic arms (this product provides the open-source structural model of the robot dog shown in the image below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoding angle sensor. Compared to potentiometers, the angle range is extended to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servos lifespan.20. Acceleration start/stop function: allows setting speed and acceleration values ??for smoother motion.21. The casing uses a higher-strength engineering plastic shell and a dual-axis low-profile structure design, optimizing the spacing between the planes where the dual-axis servo horns are located, resulting in a more compact overall structure and a more aesthetically pleasing appearance.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs 40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs 40HQ: 958 cartons * 90 pcs = 86220 pcs

Read more less