Mini Handheld Digital Storage Four-channel Automobile Maintenance Oscilloscope(DS213)


Technical parameters:
1. Main control CPU: ARM Cortex M3
2. FIFO and control: FPGA
3. ADC: HWD9288-100
4. Number of analog channels: 2 ([CH_A] [CH_B])
5. Number of digital channels: 2 ([CH_C] [CH_D])
6. Number of calculation channels: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D]
7. Vertical sensitivity: 10mV-10V/div (1-2-5 STEP) (when using x1 probe); 100mV-100V/div (1-2-5 STEP) (when using x10 probe)
8. Vertical resolution: 8 bits
9. Memory depth: 4 channels 4*4K
10. Input coupling mode: DC, AC
11. Input voltage (MAX): 40Vpp when using x1 probe; 400Vpp when using x10 probe
12. Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger
13. Trigger mode: automatic, standard, single, instant scan
14. Trigger source: [CH_A] [CH_B] [CH_C] [CH_D]
15. Signal source: square wave: 10Hz to 8MHz, 20 levels of 3Vpp signal source
16. Sine wave, triangle wave, sawtooth wave: 10Hz to 20KHz, 11 levels of 3Vpp signal source
17. File storage capacity: built-in 8M USB disk
18. File storage format: BMP, BUF, CSV
19. Automatic measurement type: peak-to-peak value, average value, effective value, frequency, period, pulse width, duty cycle
20. Cursor measurement: time value, amplitude value
21. 4-line display:
- 1 line: [CH_A], HIDE
- 2 lines: [CH_B], HIDE
- 3 lines: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
- 4 lines: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D], HIDE
22. Sampling mode: real-time sampling
23. Sampling rate: 100M Sa/s
24. Battery power supply: 1000mAh
25. Dimensions: 99.5x58.5x13.5mm
26. Weight: 129g

Product features:
1. 5-trace 4-line general-purpose electronic engineering task digital storage oscilloscope based on ARM Cortex M3 core
2. Adopting FPGA to manage and control the external ADC and the working mode of data cache, it provides 4 application partitions, which can be used to load and upgrade up to 4 different application firmware
3. Built-in 8MB USB flash drive, which can store waveforms and upgrade system firmware
4. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware as needed
5. Small size, light weight, easy to carry, and can be handheld
6. Can store waveform data, waveform analysis and comparison are more efficient and intuitive
7. Multiple triggering modes, support positive and negative edge triggering, logic triggering, pulse width triggering
8. Powerful waveform processing capabilities, can automatically measure voltage, frequency, pulse width and other parameters

Packing list:
Oscilloscope host x 1
(X1) Oscilloscope probe x 1
(X10) Oscilloscope probe x 1
L-type hexagonal screwdriver x 1
micro-usb charging cable x 1


Specification:
Package Weight
One Package Weight 0.15kgs / 0.34lb
One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch
Qty per Carton 30
Carton Weight 5.60kgs / 12.35lb
Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch
Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs
40HQ: 1212 cartons * 30 pcs = 36360 pcs

Mini Handheld Digital Storage Four-channel Automobile Maintenance Oscilloscope(DS213)

Product form

SKU: TBD0606112801A

  • In stock (Processing Time 1 - 72 hours)

94.402 Ft

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Technical parameters:
    1. Main control CPU: ARM Cortex M3
    2. FIFO and control: FPGA
    3. ADC: HWD9288-100
    4. Number of analog channels: 2 ([CH_A] [CH_B])
    5. Number of digital channels: 2 ([CH_C] [CH_D])
    6. Number of calculation channels: INV [CH_A], INV [CH_B], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D]
    7. Vertical sensitivity: 10mV-10V/div (1-2-5 STEP) (when using x1 probe); 100mV-100V/div (1-2-5 STEP) (when using x10 probe)
    8. Vertical resolution: 8 bits
    9. Memory depth: 4 channels 4*4K
    10. Input coupling mode: DC, AC
    11. Input voltage (MAX): 40Vpp when using x1 probe; 400Vpp when using x10 probe
    12. Soft trigger type: positive and negative edge trigger, pulse width trigger, logic trigger
    13. Trigger mode: automatic, standard, single, instant scan
    14. Trigger source: [CH_A] [CH_B] [CH_C] [CH_D]
    15. Signal source: square wave: 10Hz to 8MHz, 20 levels of 3Vpp signal source
    16. Sine wave, triangle wave, sawtooth wave: 10Hz to 20KHz, 11 levels of 3Vpp signal source
    17. File storage capacity: built-in 8M USB disk
    18. File storage format: BMP, BUF, CSV
    19. Automatic measurement type: peak-to-peak value, average value, effective value, frequency, period, pulse width, duty cycle
    20. Cursor measurement: time value, amplitude value
    21. 4-line display:
    - 1 line: [CH_A], HIDE
    - 2 lines: [CH_B], HIDE
    - 3 lines: [CH_C], REC_1, REC _2, REC _3, REC _4, HIDE
    - 4 lines: [CH_D], [CH_A]+[CH_B], [CH_A]-[CH_B], [CH_C]&[CH_D], [CH_C] [CH_D], HIDE
    22. Sampling mode: real-time sampling
    23. Sampling rate: 100M Sa/s
    24. Battery power supply: 1000mAh
    25. Dimensions: 99.5x58.5x13.5mm
    26. Weight: 129g

    Product features:
    1. 5-trace 4-line general-purpose electronic engineering task digital storage oscilloscope based on ARM Cortex M3 core
    2. Adopting FPGA to manage and control the external ADC and the working mode of data cache, it provides 4 application partitions, which can be used to load and upgrade up to 4 different application firmware
    3. Built-in 8MB USB flash drive, which can store waveforms and upgrade system firmware
    4. The oscilloscope code application layer is open source, and users can develop oscilloscope firmware as needed
    5. Small size, light weight, easy to carry, and can be handheld
    6. Can store waveform data, waveform analysis and comparison are more efficient and intuitive
    7. Multiple triggering modes, support positive and negative edge triggering, logic triggering, pulse width triggering
    8. Powerful waveform processing capabilities, can automatically measure voltage, frequency, pulse width and other parameters

    Packing list:
    Oscilloscope host x 1
    (X1) Oscilloscope probe x 1
    (X10) Oscilloscope probe x 1
    L-type hexagonal screwdriver x 1
    micro-usb charging cable x 1


    Specification:
    Package Weight
    One Package Weight 0.15kgs / 0.34lb
    One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch
    Qty per Carton 30
    Carton Weight 5.60kgs / 12.35lb
    Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch
    Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs
    40HQ: 1212 cartons * 30 pcs = 36360 pcs

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account