PULUZ 4 in 1 Vlogging Live Mini Octopus Bracket Kit + Studio Light + Microphone + Phone Clamp Kits(Black)

Description

Tripod Holder
1. Made with ABS + high-density rubber-coated robust which makes it sturdier, more durable and better the skid resistance.
2. The desk tripod stand is lightweight and mini size, easy to storage and travel comfort. It can easily be placed in your backpack.
3. 360 degree rotation ballhead allows you to capture good shot.
4. Flexible tripod legs which allow you to angle your camera in various angles while capturing those special moments. You can also place it anywhere you can think of, like lampposts, fence posts, tree limbs, chairs, doorknobs etc.
5. 1/4 inch screw is fully Applicable for Nikon, Canon, Pentax Sony, Panasonic, Olympus, Kodak, Fujifilm, Casio, GoPro Action cameras etc.
6. With gear limiting, load: 2KG

Studio Light
1. This is camcorder professional LED camera light.
2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography.
3. Include independent power switch and keep the same brightness out when switch it on again.
4. Support 4 x AA batteries (batteries not included) power input, more convenient to use.
5. Support external power input (Type-C port), suitable for long time use.
6. Built-in 104 pieces high quality LED beads.
7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere.
8. Highly efficient, power-saving, low energy consumption.
9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod.
10. With dual cold shoes slots, can install microphones or cellphone.
11. With a 1/4 inch female screw for Canon, Nikon, Sony, and other Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.

Specifications
1. Material: ABS
2. Color temperature: 3200-6400K
3. Brightness: 1800LM
4. Lamp beads: 104pcs
5. Index: Ra>97
6. Size 10.5 * 8.8 * 3.5cm
7. Power supply: TYPE-C/4 x AA battery (not included)
8. Input voltage: 5V

Microphone
1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity
2. Load impedance: <0.68Kohm
3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones
4. Microphone type: electret condenser microphone
5. Microphone specification: 14*6.5mm
6. Directivity: Single point
7. Frequency response: 20-20000Hz
8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa).
9. Signal to noise ratio: >65DBSPL
10. Test voltage: 1.5V

Phone Clamp
1. Made of high quality sponge rubber protective and plastic body, durable and appropriate protection of mobile phone.
2. Base and back each has a 1/4 inch screw holes,can connect to 1/4 inch screw of any device.
3. Sponge and rubber mat protect mobile phone from scratch.
4. This is a mobile phone accessory, apply to selfie stick, tripod mount, monopod and more.
5. With a cold shoe base to install a flash and micophone with cold shoe adapter.
6. Clamp range: 5.8cm to 8.5cm, almost can clip all the mobile phones.
7. Perfect for taking selfies and recording videos hands free.

Package List
1. Tripod Holder x 1
2. Studio Light x 1
3. Microphone x 1
4. Phone Clamp x 1
5. Bluetooth Remote Control x 1
6. Wind Shield x 1
7. USB Cable x 1
8. Filter Plates x 2
9. 3.5mm Audio Adapter Cable x 2
10. Protective Bag x 1
11. Color Package Box x 1

PULUZ 4 in 1 Vlogging Live Mini Octopus Bracket Kit + Studio Light + Microphone + Phone Clamp Kits(Black)

Product form

SKU: PKT3094B

  • In stock (Processing Time 1 - 72 hours)

15.820 Ft

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    Tripod Holder
    1. Made with ABS + high-density rubber-coated robust which makes it sturdier, more durable and better the skid resistance.
    2. The desk tripod stand is lightweight and mini size, easy to storage and travel comfort. It can easily be placed in your backpack.
    3. 360 degree rotation ballhead allows you to capture good shot.
    4. Flexible tripod legs which allow you to angle your camera in various angles while capturing those special moments. You can also place it anywhere you can think of, like lampposts, fence posts, tree limbs, chairs, doorknobs etc.
    5. 1/4 inch screw is fully Applicable for Nikon, Canon, Pentax Sony, Panasonic, Olympus, Kodak, Fujifilm, Casio, GoPro Action cameras etc.
    6. With gear limiting, load: 2KG

    Studio Light
    1. This is camcorder professional LED camera light.
    2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography.
    3. Include independent power switch and keep the same brightness out when switch it on again.
    4. Support 4 x AA batteries (batteries not included) power input, more convenient to use.
    5. Support external power input (Type-C port), suitable for long time use.
    6. Built-in 104 pieces high quality LED beads.
    7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere.
    8. Highly efficient, power-saving, low energy consumption.
    9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod.
    10. With dual cold shoes slots, can install microphones or cellphone.
    11. With a 1/4 inch female screw for Canon, Nikon, Sony, and other Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.

    Specifications
    1. Material: ABS
    2. Color temperature: 3200-6400K
    3. Brightness: 1800LM
    4. Lamp beads: 104pcs
    5. Index: Ra>97
    6. Size 10.5 * 8.8 * 3.5cm
    7. Power supply: TYPE-C/4 x AA battery (not included)
    8. Input voltage: 5V

    Microphone
    1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity
    2. Load impedance: <0.68Kohm
    3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones
    4. Microphone type: electret condenser microphone
    5. Microphone specification: 14*6.5mm
    6. Directivity: Single point
    7. Frequency response: 20-20000Hz
    8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa).
    9. Signal to noise ratio: >65DBSPL
    10. Test voltage: 1.5V

    Phone Clamp
    1. Made of high quality sponge rubber protective and plastic body, durable and appropriate protection of mobile phone.
    2. Base and back each has a 1/4 inch screw holes,can connect to 1/4 inch screw of any device.
    3. Sponge and rubber mat protect mobile phone from scratch.
    4. This is a mobile phone accessory, apply to selfie stick, tripod mount, monopod and more.
    5. With a cold shoe base to install a flash and micophone with cold shoe adapter.
    6. Clamp range: 5.8cm to 8.5cm, almost can clip all the mobile phones.
    7. Perfect for taking selfies and recording videos hands free.

    Package List
    1. Tripod Holder x 1
    2. Studio Light x 1
    3. Microphone x 1
    4. Phone Clamp x 1
    5. Bluetooth Remote Control x 1
    6. Wind Shield x 1
    7. USB Cable x 1
    8. Filter Plates x 2
    9. 3.5mm Audio Adapter Cable x 2
    10. Protective Bag x 1
    11. Color Package Box x 1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Login

    Forgot your password?

    Don't have an account yet?
    Create account