3D Printer Machines

1. Low temperature design, can paint on the skin, not hot2. One-key operation of the speed control button, simple and convenient, wireless operation, easy to use3. Intelligent voice broadcast, prompt operation is easier, drawing is easier4. Use the interface to charge, easy and convenient, built-in lithium battery, long-lasting battery life5. PCL environmental protection material, diameter 1.75 mm6. Cool lights, colorful changes, can be switched freely7. Low-temperature consumables, environmentally friendly and smooth8. LCD temperature display, control temperature changes at any time9. Ergonomic interaction, comfortable grip function, rich buttons, easy to use10. Power switch, long press the power to turn on, the light flashes, the machine preheating indicator is always on, the preheating is complete, and the operation can be started11. Soft plastic fish fin decoration, with lighting design, cool and colorful12. Quick start with zero foundation, three-level speed regulation, can be assembled into a plane or a three-dimensional shape13. Use time: about 60 minutes14. Charging time: about 30 minutes15. Charging method: USB charging / built-in lithium battery16. Battery capacity: 450mah17. Material: ABS+Silicone18. Size: 17x5cmStandard product list:-1 x charging cable-1 x cleaning needle-1 x writing card-1 x kids scissors-1 x instructional video-1 x color box packaging-1 x instruction manual-1 x tracing board-3 x consumables (about 6 meters)-12 x tracing cards

Read more less

1. Low temperature design, can paint on the skin, not hot2. One-key operation of the speed control button, simple and convenient, wireless operation, easy to use3. Intelligent voice broadcast, prompt operation is easier, drawing is easier4. Use the interface to charge, easy and convenient, built-in lithium battery, long-lasting battery life5. PCL environmental protection material, diameter 1.75 mm6. Cool lights, colorful changes, can be switched freely7. Low-temperature consumables, environmentally friendly and smooth8. LCD temperature display, control temperature changes at any time9. Ergonomic interaction, comfortable grip function, rich buttons, easy to use10. Power switch, long press the power to turn on, the light flashes, the machine preheating indicator is always on, the preheating is complete, and the operation can be started11. Soft plastic fish fin decoration, with lighting design, cool and colorful12. Quick start with zero foundation, three-level speed regulation, can be assembled into a plane or a three-dimensional shape13. Use time: about 60 minutes14. Charging time: about 30 minutes15. Charging method: USB charging / built-in lithium battery16. Battery capacity: 450mah17. Material: ABS+Silicone18. Size: 17x5cmStandard product list:-1 x charging cable-1 x cleaning needle-1 x writing card-1 x kids scissors-1 x instructional video-1 x color box packaging-1 x instruction manual-1 x tracing board-3 x consumables (about 6 meters)-12 x tracing cards

Read more less

1. Low temperature design, can paint on the skin, not hot2. One-key operation of the speed control button, simple and convenient, wireless operation, easy to use3. Intelligent voice broadcast, prompt operation is easier, drawing is easier4. Use the interface to charge, easy and convenient, built-in lithium battery, long-lasting battery life5. PCL environmental protection material, diameter 1.75 mm6. Cool lights, colorful changes, can be switched freely7. Low-temperature consumables, environmentally friendly and smooth8. LCD temperature display, control temperature changes at any time9. Ergonomic interaction, comfortable grip function, rich buttons, easy to use10. Power switch, long press the power to turn on, the light flashes, the machine preheating indicator is always on, the preheating is complete, and the operation can be started11. Soft plastic fish fin decoration, with lighting design, cool and colorful12. Quick start with zero foundation, three-level speed regulation, can be assembled into a plane or a three-dimensional shape13. Use time: about 60 minutes14. Charging time: about 30 minutes15. Charging method: USB charging / built-in lithium battery16. Battery capacity: 450mah17. Material: ABS+Silicone18. Size: 17x5cmStandard product list:-1 x charging cable-1 x cleaning needle-1 x writing card-1 x kids scissors-1 x instructional video-1 x color box packaging-1 x instruction manual-1 x tracing board-3 x consumables (about 6 meters)-12 x tracing cards

Read more less

1. From imagination to practice, from two-dimensional to three-dimensional to explore artistic talent, enlighten children's multi-dimensional brain and hands-on ability2. Stepless speed regulation, low temperature not hot3. Smooth and non-blocking, plug in and use4. The anti-scald design can be used to draw directly on the skin. It is not hot or sticky and can be used to draw in the palm of the hand. It is a safe choice for children5. Consumables are safe and biodegradable, low energy consumption eco-friendly materials6. Comfortable grip and easy operation7. Accurate roundness, high strength, precise diameter, suitable for all kinds of printing8. Two-level adjustment, intelligent speed control, uniform and more stable output, direct preheating when plugged in9. Battery capacity: 800mAh10. Power supply mode: USB charging/built-in lithium battery11. Nozzle diameter: about 0.7MM12. Consumable diameter: about 1.75MM13. Spinning speed: adjust by yourself14. Rated voltage: 5V15. Rated current: 2A16. Rated power: 10W17. Discharge method: hot melt extrusion18. Materials used: environmentally friendly PLA19. Material: ABS20. Size: 168 x 25 x 25MM21. Weight: about 50G

Read more less

1. From imagination to practice, from two-dimensional to three-dimensional to explore artistic talent, enlighten children's multi-dimensional brain and hands-on ability2. Stepless speed regulation, low temperature not hot3. Smooth and non-blocking, plug in and use4. The anti-scald design can be used to draw directly on the skin. It is not hot or sticky and can be used to draw in the palm of the hand. It is a safe choice for children5. Consumables are safe and biodegradable, low energy consumption eco-friendly materials6. Comfortable grip and easy operation7. Accurate roundness, high strength, precise diameter, suitable for all kinds of printing8. Two-level adjustment, intelligent speed control, uniform and more stable output, direct preheating when plugged in9. Battery capacity: 800mAh10. Power supply mode: USB charging/built-in lithium battery11. Nozzle diameter: about 0.7MM12. Consumable diameter: about 1.75MM13. Spinning speed: adjust by yourself14. Rated voltage: 5V15. Rated current: 2A16. Rated power: 10W17. Discharge method: hot melt extrusion18. Materials used: environmentally friendly PLA19. Material: ABS20. Size: 168 x 25 x 25MM21. Weight: about 50G

Read more less

1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven3. Rated current: 300mA4. Shell material: PC5. Voltage: 5V6. Current: 15mAShipping list:-1 x 20cm wire-1 x 1/1.5m wire-1 x Sensor-1 x Wound terminal-1 x XH2.542pin terminal-1 x XH2.543pin terminal-2 x M3 nuts/nails

Read more less

1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven3. Rated current: 300mA4. Shell material: PC5. Voltage: 5V6. Current: 15mAShipping list:-1 x 20cm wire-1 x 1/1.5m wire-1 x Sensor-1 x Wound terminal-1 x XH2.542pin terminal-1 x XH2.543pin terminal-2 x M3 nuts/nails

Read more less

1. HPD322 two-phase stepper motor driver is a cost-effective subdivision driver designed based on PI flow control algorithm. It has excellent performance, high speed and large torque output, low noise, low vibration and low heat.2. The operating current and subdivision can be selected through the dial switch. There are 16 subdivisions and 16 currents to choose from. It has overvoltage, undervoltage, phase current and total current overcurrent protection. Its input and output control signals are all photoelectric. isolation.3. Signal input: single-ended, pulse + direction and double pulse;4. Built-in micro-subdivision; the maximum power supply can reach DC36V; the current is easy to set, 16 levels are optional, the output current peak can reach 2.2A; the current is halved after 1S of inactivity5. Optically isolated differential signal input, the maximum input pulse frequency is 300KHz;6. The pulse, direction and enable terminals all have constant current input functions and can be directly connected to the input signal without adding an external series resistor for voltage reduction and current limiting protection.7. High reliability: using multi-layer boards and surface mount sealing, leaving sufficient margin for power devicesSuitable for 20, 28, 35, 39, 42 4, 6, 8-wire two-phase stepper motorsUsage environment1. Do not place it next to other heating equipment. Avoid places with dust, oil, corrosive gases, excessive humidity and strong vibration. Combustible gases and conductive dust are prohibited.2. Temperature: 0-50 degrees Celsius3. Humidity: 40-90%RH4. Vibration: 10-55 Hz/0.15mm5. Storage temperature: -20-65 degrees Celsius6. Weight: 180g​

Read more less

1. Step accuracy: +5% (full step, no load)2. Step angle: 1.8 degrees3. Temperature rise: 80 degrees Celsius Max4. Ambient temperature: -20--+50 degrees Celsius5. Insulation resistance: 100M Ω min. 500VDC6. Withstand voltage: 500VAC for 1 minute7. Radial clearance: 0.06 Max. (450g-load)8. Axial clearance: 0.08 max. (450g-load)9. Radial pressure MAX: 28N (20mm From the flange)10. Axial pressure MAX: 10N

Read more less

1. Product model: 42HS602. Holding torque: 0.7N.m3. Number of motor phases: 24. Rated voltage: 2.6V5. Step angle distance: 1.8 degrees6. Rated inductance: 2.8mH+/-20%7. Rated phase current: 1.7A8. Rated resistance: 1.5Ω+/-10%9. Permanent magnet silicon steel sheet, pure copper coil, exquisite workmanship10. Stable operation, suitable for a variety of automation equipment and instruments

Read more less

1. High purity raw materials, high precision stability control, stable temperature and melting point2. High purity of lactic acid, good fluidity, low melting point3. High precision, diameter tolerance control at about 0.02mm4. Non-toxic and harmless, safe and environmental protection5. Material: PCL6. Printing precision: 0.02MRRL7. Print size: 1.75mm8. Length: about 5m/color

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: Tungsten steel 2. Weight: 100g 3. Type: Repair Tool Series 4. Number of sets: 10 5. Item No.: MHz-10

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Brand Name:MayitrModel Number:Pillow Block BearingTorque Capacity:OtherMaterial:Zinc Alloy1. Product Name: bearing with seat2. Model: KFL-08 000 001 bearing housing3. Use: 3D printer accessories4. Specifications: KFL08 (inner diameter 8), KFL000 (inner diameter 10)), KFL001 (inner diameter 12)5. Alias: horizontal trapezoidal screw bracket6. Packing: foam bag7. Material: zinc alloy

Read more less

1. No need to wait for one imaging, bright colors, long-term preservation 2. Small size, easy to carry 3. Adhesive design, easy to open, paste firmly 4. Photo paper can be cut freely and is easy to use. 5. Size: 50x76mm

Read more less

1. Support rod kit for 3D printer with aluminum profile structure. 2. Used to enhance the stability of the Z axis and improve the printing effect. 3. Compatible with Creality Ender-3 / Ender-3S / Ender-3 Pro / Ender-3 v2 or other similar structure 3d printers, the print size is 220x220x250mm. 4. The length of a single tie rod is 36.5cm, which is convenient to install and has a more stable structure. 5. Made of high-quality aluminum alloy material, strong and durable. 6. Product size: 56x63x471mm

Read more less

1. With special power chip, support 24V power input 2. The circuit board is optimized by circuit, effectively solve the heating problem 3. Can work with E/Z/Y/X a-xis motor 4. With USB interface, easy to operate 5. For Ender-3 /3 Pro / 3V2 / 5 / 5 Pro Note: Ender-3 / Ender-3 Pro use the same main board but different firmware

Read more less

1. Material: aluminum, stainless steel and brass 2. Installation type: external thread connection 3. Nozzle size: 0.4mm 4. Length of throat: 30mm 5. Filament: 1.75 mm 6. The white wire is the temperature thermistor, the red wire is the heating tube 24V 40W 7. Nozzle tip, aluminum heating block, throat (built-in Teflon) 8. Aluminum block size: 20x20x10mm

Read more less

1. Durable and high temperature resistant. 2. The high-speed fan has good ventilation and heat dissipation effect. 3. Seamless nozzle and pipe connection, no leakage, no blockage. 4. Material: PC 5. Output voltage: 24V 6. Size: 52x63x72mm

Read more less

1. High hardness, durable and easy to clean 2. High viscosity, strong adsorption and no edge warping 3. Easy to remove the model manually, or easily remove the model with the help of the scraper of a large model 4. Flat, fast and uniform heating 5. The special coating is an inorganic coating with a hardness of 8 Mohs and can work at a temperature of 400 degrees Celsius. 6. Size: 235x235x3mm 7. Material: tempered glass 8. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Flexible and detachable, firmly adsorb the magnet 2. The magnetic base can withstand a high temperature of 140?°C without losing its magnetism 3. Fast heater performance, reducing waiting time after printing 4. PEI powder coating, high temperature resistant and not easy to deform 5. Easy to use, bend the printing plate slightly, then remove the print after cooling 6. Size: 235x235mm 7. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy 4. For 1.75mm filament 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. Used in Creality 3D Ender-3 series, Ender series, CR-10 series, CR100 3D printer

Read more less

1. Not easy to corrode in the air. 2. The hole size is accurate and the installation is convenient. 3. High temperature performance is stable and durable. 4. The leveling is simple, compact and does not take up space. 5. Material: aluminum alloy 6. Product size: 60x60x9mm 7. Suitable for FDM models

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy, flexible adjustment of extruder gear pressure 4. Compatible with a variety of consumables, can print soft plastic consumables 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. For Creality 3D Ender-3 series, CR-10 series

Read more less

1. Two-in-one proximal extrusion kit 2. Metal shell, strong and durable 3. Integrated structure, simple wiring, easy to disassemble and replace 4. Compatible with a variety of consumables, can print soft plastic consumables 5. Direct extrusion, more accurate feeding 6. Output voltage: 24V 7. Nozzle diameter: 0.4mm 8. Rated voltage: 150V-230V, 50-60Hz 9. Product size: 76x96x125mm 10. Used for Creality 3D Ender-3, Ender-3S, Ender-3Pro

Read more less

1. The product can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer. 2. 3D Touch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. 3. The main functions and controls of 3D Touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch, thus, 3D Touch can be used on almost every 3D printer control board. 4. If you choose 3D Touch, your 3D printer will be high-class masterpiece, giving you an enjoyable experience.

Read more less

1. This is a shaft- reversed stepper motor that is frequently used in CNC machines and 3D printers. 2. The Advantages of step motors are low cost, high reliability, high torque at low speeds and a simple, rugged construction that operates in almost any environment. 3. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications. 4. The Nema 17 is larger and generally heavier than for example a Nema 14, but this also means it has more room to put a higher torque.

Read more less

1. LCD-Panel-adapter-FD is an adapter for Adruino DUE and Ramps-FD, which are always combined to work as a 3D printer control board. 2. As the operating voltage of the Arduino DUE chip is 3.3v, while the LCD display works best at 5V, we add a signal amplification circuit in chip of the adapter, so that the DUE board can better drive and isolate the LCD display. 3. LCD-Panel-adapter-FD is considered to be one of the best LCD adapters for DUE+ Ramps-FD on the market.

Read more less

1. The firmware is the prevalent Marlin, which is known for its stability, usability, and high-performance. 2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ. 3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V. 4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse. 5??? 3 12v fan output and one PWM output for LED or other lighting equipment. 6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.

Read more less

1. Please use a good power supply and thick copper wire to connect the heat bed. 2. You need basic soldering skills to solder the power wire.

Read more less

1. 42mm high quality stepper motor with larger torque and less heat build up. 2. Special ceramic insulation cotton ensures the stability of heating; electricity-saving. 3. Direct transmission, without the heavy gears, compact size and weight. 4. Material of Print: 1.75mm or 3mm PLA / ABS materials.

Read more less

1. This is an modified MK8 extruder, which features outstanding quality and ensures better performance for 3D printers. 2. The heat-resisting PTFE tube inside the barrel ensures fluent feeding and helps avoid blocking problem thanks to its self-lubricity. 3. The brass nozzle ensures accurate extrusion, realizing excellent printing effect. 4. Direct transmission, without the heavy gears, compact size and weight. 4. Precise brass nozzle ensures accurate extrusion, realizing excellent printing effect.

Read more less

1. This is an MK8 Extruder Aluminum feeder Kit for 1.75mm /3mm filament. (3mm is only available for short distance ). 2. This kit is also available for both left and right hand direction, short-distance and long distance(with two push-in fittings), which gives you 6 options in total, please choose according to your requirement. 3. Please note that stepper motor and cooling system is not included.

Read more less