Computer Components

1. This adapter can convert the normal M2 KEY A-E interface to M.2 nvme ssd interface.2. Support 2230, 2242, 2260 and 2280 size NGFF SSD.3. There are four mounting holes on the board, which are 22x30mm, 22x42mm, 22x60mm, and 22x80mm. According to the length of the slot in your machine, you can interrupt the positioning3. Connect NVME M KEY SSD to M2 KEY A-E motherboard, support PCIE based NVME SSD4. Easy to install, no driver required, no additional power supply required.parameter:1. Interface: M.2 KEY A/Ε TO M.2 KEY-M2. Product color: black PCB3. Interface rate: PCI-E 3.0 1X only supports NVME and PCIE protocol SSD4. Product size: 91.8mm x 22.4mm5. Working environment: -5-70 degrees Celsius6. Support system: WIN10 WIN11Precautions:1. Does not support SATA NGFF M.2 disk, does not support CNIV network card interface2. It is recommended to install 2230 or 2242 NVMe M.2 NGFF SSD for this M.2 interface, and M.2 SATA NGFF SSD of other protocols cannot be inserted.

Read more less

Product specifications: 1. Dimensions (length x width x height): 85x85x12mm. 2. Pitch: 40x40x40mm. 3. Voltage: 12V. 4. Weight: 0.1kg. 5. Power connector: 4 pins.

Read more less

1) ESS 4-Channel 3D Surround Sound PCI Computer Sound Card w/ Built-In Headphone Buffer 2) Built-in 32 Ohm Earphone buffer and 3D Surround 3) Line-in, microphone and line-out jacks 4) Plug and Play 5) Support OS: Windows 98/ ME/2000/XP/Vista, Windows 7

Read more less

1.Dual band: 2.4Ghz / 5Ghz(160Mhz), Max speed:Speed up to 1730Mbps (The router must on 160Mhz), Interface: NGFF Key E, Interface size: 22x30mm. 2.Operating Temperature(Adapter Shield):0 to 80 (Celsius), Only work with Microsoft Windows 10. 3.Replace damaged or inoperable parts with new ones. 4.Each item is inspected and in good condition prior to shipment. 5.Strongly recommended professional installation. We are not responsible for any equipment damage that may result from your replacement parts replacement process.

Read more less

1. Graphics card cooling cooler fan replacement for Asus Strix RX470 RX460 GTX980TI R9 390X CTX1080 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. The cooling fan has a large air volume and excellent heat dissipation performance, providing heat dissipation protection for the overheated VGA graphics card. 2. 4-wire fan. 3. The fan is reliable in quality and has a long service life. 4. For Zotac Geforce GTX 1080 Ti GTX 1080Ti AMP version. 5. Diameter: 95mm.

Read more less

1.Fully complies with ZIF specifications2.Support 3.3V Mini PCI-e SSD (mSATA module)3.Connect Mini PCI-e mSATA SSD as 1.8 inch ZIF SSD4.No extra power adapter or drivers needed5.Compatible with DOS, Win98 / SE, 2000, Server 2003, XP, Vista, 7, Sever 2008, Mac OS, Linux

Read more less

This product converts the PCI-E interface on a computer into a separate 32-bit PCI interface. It can solve the problem of lack of PCI card slot on the motherboard, PCI-Express X1/X4/X8/X16 are applicable. You can use this product to continue to work with your PCI device.Features:1. Support PCI slot 3.3V/1A, 3.3Vaux/100mA, 5V/5A and 12V/500mA2. Provided 4Pin power supply(support 12V and 5V power supply is required)3. Support PCI 32-bit 33MHz PCI interface.Package list:1 * PCI Express to PCI Card

Read more less

1. Product use: Because there are more and more USB devices now, when the USB ports on the chassis are not enough, you can use this device to directly convert the USB 19pin interface, 9PIN and audio on the board into 2 USB3.0 interfaces + 2 USB2 .0 and headphone-out and microphone jacks (or 4 USB 2.0 ports and headphone-out and microphone jacks), installed in the vacant optical drive position. In this way, the front USB interface and audio interface are provided, and there is no need to bend down to plug in the cable, which is very convenient2. In addition, in order to save costs, the front panel of the chassis adopts AC-97 interface board. Currently, the front panel, panel cable and chassis on the market all use AC-97 interface, while the main board currently uses HD-AUDIO interface. As a result, there is no sound from a speaker, or the insertion detection jumps around. This problem can be solved with our panel. Real HD-AUDIO interface.3. Hardware requirements: a USB3.0 19PIN interface, a 9PIN USB2.0 interface and a motherboard or adapter card supporting HD-AUDIO audio, and a chassis with a free optical drive.4. Electroplated metal base and panel5. Color: black silver white spray paintPackaging accessories:Optical drive panel x 1Audio cable 9PIN-9PIN x 1Fixing screw x 5

Read more less

1. There is an indirect contact between the solid-state hard disk box and the motherboard by using the riser card, which can more effectively protect the gold finger and slot, and is not easy to be damaged.2. Product interface: KEY-M interface or KEY-B/M interface is optional3. Compatible with 2230 2242 2260 2280 SSD4. Product size: 22 x 110mm5. Product color: black PCB6. Support system: all systems that support M.2 can be usedPrecautions:A. Please confirm the interface between the motherboard M.2 slot and the M.2 hard disk, otherwise it will not be insertedB. This is just to extend the motherboard, it will not speed up or slow downC. Suitable for motherboard M2 slot testing or M2 hard disk testing

Read more less

1) DVD Recordable Disks 2) Interchangeable, and suitable for all of the drive. 3) High Quality 4) Durable 5) Format: DVD-R 6) Capacity: 1.4GB 7) Recording Time: 30mins

Read more less

1. The memory frequency is up to 1600MHz, the bandwidth is increased by 30%, the compatibility is strong, the stability is high, and the performance is excellent. 2. Quality particles, through multi-channel testing and screening tests, have high stability and high efficiency. 3. Gold plating, stronger corrosion resistance and better conductivity. Parameters: 1. Type of use: desktop computer. 2. Memory capacity: 8GB. 3. Memory type: DDR3. 4. Memory frequency: 1600MHz. 5. Number of pins: 204 Pin. 6. CL delay: 9. 7. Working voltage: 1.5V.

Read more less

Product specifications: 1. Voltage: DC 12V. 2. Current: 0.5A. 3. Fan size (length x width x height): approx. 85x85x15mm. 4. Mounting hole distance (center to center): approx. 40x40x40mm. 5. Power connector: 4 pins. 6. Length: 80mm. 7. Bearing: Double ball bearing. Precautions: 1. When purchasing a graphics card fan, do not purchase it according to the graphics card model, because the same type of graphics card has different fans. 2. This item is a video card fan replacement. Do not include mounting screws, heat sinks or other. 3. Measure the fan size and mounting hole distance and make sure it fits your video card.

Read more less

1. The USB virtual 7.1 channel sound adapter is a highly flexible audio interface which can be used with desktop or notebook systems 2. Bundled with Xear 30 sound simulation software 3. It turns your stereo speaker into 7.1 channel environment 4. No drivers required just plug and play for instant audio play, also compatible with all major operation systems

Read more less

1. Accord with: CF spec Ver2.0 and IDE / ATA-33 spec 2. Standard IDE interface: true-IDE mode, support DMA-33 transfer mode 3. Support CF-I and CF-II : also support IBM micro-driver with CF-II interface 4. DE 40 Pin / 25.54mm or 44 pin / 2.0mm female or male connector: plug card into IDE socket directly or connect to motherboard by a cable 5. CF socket mounted flexible: different CF socket can be mounted, single / double side selectable for double-side type 6. Master/slave jumper: CF card on each side can be configured as Master or slave 7. Use CF as DOM: Supply auto select from IDE 40 pin-20 or FDD power connector, or from IDE WHEN use IDE 44 8. System Supported: Windows 98/2000/ME/XP 9. Size: 6x4.5x1.5cm 10. Weight: 17g

Read more less

1.BIOS: Standard (Fit all brand laptop, not included HP/ Lenovo/ Thinkpad) , Supported Operating Systems: Win10 / 8 / 7 (Win XP / Vista / Linux DO NOT Support). 2.Replace damaged or inoperable parts with new ones. 3.Each item is inspected and in good condition prior to shipment. 4.Strongly recommended professional installation. We are not responsible for any equipment damage that may result from your replacement parts replacement process.

Read more less

1. Four caster wheels, move freely, easy to handle 2. The front two wheels can be locked by brakes to ensure stability on the smooth ground 3. More way to use, not only a computer bracket, but also a pot plant holder, easy to move, simple and beautiful 4. Material: ABS 5. Surface: carbon fiber surface 6. Weight: 0.46kg 7. Dimension: 23x44.8x1.5cm

Read more less

1. Suitable for ROG ALLY modified M2 hard drive adapter card, using large-capacity 2280 SSD to replace small-capacity 2230 SSD, taking your gaming experience to a new level.2. This riser card features a 90-degree angle design, making it ideal for compact PC builds.3. This high-speed M2 transfer card enables seamless data transfer, ensuring a smooth gaming experience and reducing loading times.4. Supported hard drive size: 22 x 80mm5. Note: SSD not includedinstallation method:1. First install the 2280 to be replaced into the hard disk enclosure and prepare for system cloning.2. Turn on the game console and enter the system, connect the hard disk box, open DiskGenius, and use the "System Migration" function to clone the original 512G system disk to the new disk.?

Read more less

1. 6 heavy protection design: overcurrent / overvoltage / undervoltage / over temperature / over power / short circuit2. Vortex fan blade fan frame cooling design, energy efficient, quiet and low noise3. High-density honeycomb cooling holes, better protection of internal components of the power supply4. 12V stable voltage, work more safely5. Support back alignment, a variety of interface configuration6. Galvanized double magnetic core filter, built-in dual capacitors, full copper transformerParameters:1. Type: ATX power supply2. Rated power: 500W3. Fan: 12 cm hydraulic fan4. PFC: non-active PFC5. Efficiency: 80%6. Input voltage: 220-240VAC7. Support wide range: support8. Support temperature control: Yes9. Main power supply interface: (20+4) P x 110. CPU 12V power supply interface: (P4+4) x 111. D-type 4PIN interface: 212. SATA interface: 313.6PIN+2 PCI-E interface: 114. Peak: 700W15. Power cord length: 1.5m(CN Plug)Fan parameters:1. Fan size: L120 x W120 x H25mm2. Bearing: hydraulic3. Rated current: 0.18Amp4. Cooling method: air-cooled5. Fan speed: 900-1700RPM +/- 10%6. Rated voltage: 12V

Read more less

1. Adjustable width and lengthfits a large range of CPUs; adjusts from 8 to 12 inch, length from 15.7 to 19 inch. 2. The PC cart can elevate pc off the floor to support cool airflow into the bottom of the case, reduce CPU and GPU temps. 3. This PC tower stand has four casters(2 lockable wheels), designed to improve mobility and stability, you can easily move the computer. Insert the wheels into the bottom hole, and ensure the two lockable wheels should be mounted on the front end of the same side 4. Turn on the inner adjustment switch. then adjust the width according to the size of the ATX case. 5. Secure the switch and comptele the installation. 6. Size: 40.6-49 x 22.1-31 x 10cm 7. Weight: 800g

Read more less

Features:1. 1394b expansion card is designed based on IEEE 1394b standard, and in line with IEEE 1394-1995 and IEEE 1394a-2000 standard.2. The transmission speed can be up to 800Mbps, but also downward compatible with 400 / 200 / 100Mbps devices.3. Works with various types of 1394b and 1394a Devices including DV Camcorder, Digital Camera and Other Audio & Video Devices.4. Supports two way transmission, fully interoperable with FireWire, iLink, and SB1394, implementation of IEEE 1394 Standard.5. Plug and play, hot-swapping. Supports for Windows 7 / 10 / 11 , for Mac.Specifications:1. Model Number: FG-EFWB-V1T-003BI2. Port: 2 x 1394b (6 Pin), 1 x 1394a (4 Pin)3. Data Transfer Rates: 800 / 400 / 200 / 100Mbps

Read more less

1. Copper core motor, strong wind, fast heat dissipation, safe and durable2. Low noise, long life, low energy consumption, large air volume, stable operation, fast start3. High-strength and high-toughness fan blade, one-time injection molding, long service life, not easy to deform and break; not only has strong wind power but also effectively reduces noise4. The outer frame is made of high-quality PVC plastic, which can withstand high temperature and withstand physical impact to a certain extent, effectively protecting the motor and fan blades5. The use of pure copper coils can effectively reduce the operating temperature and current of the fan, high temperature resistance, greatly improve its operating stability and low energy consumption6. Blade material: PVC plastic7. Applicable temperature: -10 to 60 degrees Celsius8. Use scenarios: industrial equipment, household appliances, medical equipment, etc.9. Motor power: 1.92/3.12W10. Air volume: 20.3/25.4cfm11. Bearing: double ball/oil12. Lifespan: 60000 hours13. Current: 0.16/0.13A14. Voltage: 5/12/24V15. Speed: 5000/400RPM16. Dimensions: 60 x 60 x 25MMDifference:- Ball bearing: the model is generally indicated by B; there are several tiny steel balls in the bearing that rotate around the axis in the form of rolling friction, so the friction force is small and there is no oil leakage. Features: long life, suitable for high speed fans- Oil-impregnated bearing: the model is generally indicated by S; it adopts a sliding friction sleeve, and the shaft of the fan blade uses lubricating oil in the sleeve as a lubricant and a drag reducer. Features: Resistance to external impact, low noise

Read more less

1. Product function: convert the motherboard USB3.0 19PIN to TYPE-C front TYPE-E 20PIN2. Product interface: USB3.0 19PIN USB3.1 TYPE-E3. Support system: Any system that can support USB3.0 can be used, and the main board or expansion card with 19PIN socket and the chassis with TYPE-E cable are required4. Precautions: Since 19PIN is GEN1 5Gbps rate, so only 5Gbps rate is transferred out, and the speed cannot be increased5. Compatible with all Windows and Linux systems.

Read more less

1. Thickened gold-plated gold fingers, more stable transmission2. Multiple SATA3.0 expansion cards can be installed on the same computer and work at the same time to achieve multiple simultaneous reading3. The system comes with soft RAID and supports 4 storage modes4. Aluminum alloy heat dissipation, durable and enhance the stability of operation5. Using the JMB585 chip solution, high-speed transmission and stable performance, dedicated to meeting the needs of users for massive data space6. LED working indicator light, the SATA device is connected normally, the indicator light is always on, and the indicator light flashes when data exchange is in the state of reading and writing7. System: Mac OS/Windows/Linux8. Product interface: support PCI-E X4 (compatible with X8 X16)9. Output interface: SATA3.0 x 510. Weight: about 46.6g11. Size: about 12 x 8cm

Read more less

1. NGFF SATA Riser Card Mobile Hard Disk Box2. Large-area gold plating is used to expand the heat dissipation area, increase the heat dissipation effect, and improve the stability of the hard disk3. 1GB file transfer in seconds4. JMS580 master control, USB3.2 10G, SATA3 6Gb5. Total bandwidth: USB3.2 10G SATA3 6G6. Applicable slot: M.2 B KEY7. Number of interfaces: M.2 SATA mobile hard disk adapter card8. Product accessories: locking plate screw + screwdriver + mobile stud9. Size: 98 x 22mm10. Net weight: 7.6g11. Gross weight: 13.6g12. Note: The product does not include a demo SSD2230/2242/2260 SSD turntable steps:1. Insert the short-sized SSD at a 45-degree angle into the card slot2. Snap the mobile stud into the end of the SSD3. Press and hold the locked stud to rotate to the back of the product4. Use a screwdriver to lock the locking disc screws into the holes from the back5. Finish

Read more less

1. This product is used to remotely start/shut down/restart the computer, and it can fully control the computer with third-party remote desktop software.2. After installation, it will not affect the use of the chassis buttons, and the chassis buttons can be locked at any time to prevent others from switching on and off your computer3. The power-on card is connected to WIFI. When using it for the first time, configure it once with the control terminal (such as the mobile phone terminal). Automatically reconnect when disconnected4. The same user can bind multiple power-on cards, and can share their own cards with other users, and can be shared with multiple users for control, which is flexible and convenient.5. Main functions: computer power on and off, reset, temperature detection, fan speed test, forced shutdown, timer power on and off, automatic power on when incoming calls6. Network standard: 2.4G (5G network is not supported)7. Input interface: PCI-E 1X8. Support slots: PCI-E 1X 4X 8X 16X9. Product module: TUYA10. Support system: all systems

Read more less

1. Product use: Installed in the idle floppy drive position, providing the front USB interface and audio interface, no need to bend down to plug in the cable, very convenient2. Hardware requirements: the motherboard needs to have a USB 2.0 9Pin and audio interface to use3. This panel is installed to the floppy drive position of the chassis, that is, the size of a 3.5-inch floppy drive, and the size is 102.2 wide x 25.2 high x 94mm4. The audio interface is HD-AUDIO interface, which can only be used if the motherboard supports HD-AUDIO audio interface. Currently, the motherboards on the market all support HD-AUDIO interface. If only one channel has sound, please go to the motherboard official website to download the sound card driver to support HD-AUDIO.5. Because the product is assembled later, it may be a little bit different from your case color and size

Read more less

1. Material: copper-aluminum combination2. Suitable for NVME/Ngff dual-protocol hard disk, compatible with 22x80 size SSD3. Double-sided laminated thermal silica gel, multiple heat dissipation4. Protect hard disk data at all times to prevent loss5. Surface anode, oxidation treatment6. All aluminum alloy construction, fast heat dissipation7. Keep the hard disk stable, and the office/game will not freeze8. Dimensions: 7.2x1.4x2.4 cm9. Weight: about 74 grams

Read more less

1. Voltage: 12V DC2. Current: 0.2A3. Interface: 3PIN4. Bearing: hydraulic bearing5. Air volume: 28CFM6. Speed: 20000PRM7. Noise: 23DBA8. Down-blowing design, effective heat dissipation9. Suitable for CPU with power not greater than 95W10. Copper-plated aluminum sheet greatly increases the heat dissipation effect and prevents oxidation11. 7 sickle-shaped fan blades to ensure smooth air flow, large air volume and silent12. Double buckle design, sturdy, not easy to deform13. Fan size: 90x90x25 mm14. Dimensions: 117x117x50 mm15. Weight: about 160 grams

Read more less

1. Made of SECC plate material, brush front panel. 2. Front interface: USB 2.0. 3. Compatible motherboard: MicroATX, ATX. 4. Fan can be installed to form convection heat dissipation. 5. 1 x 12cm cooling fans are reserved for the side panels, 1 x 6cm cooling fans are reserved for the back window. 6. Size: 40*19*41cm. 7. Chassis case only, not include other accessories.

Read more less

Application:Emulator Interface Type:USB Type:Internal Model Number:Floppy Disk Drive USB Floppy Emulator:Floppy Disk Product Features:This floppy drive emulator is great for electronic organHousing Material:ABSColor:BlackFloppy driver with below function needed:Floppy driver with 34pin interface,and 5V DC power plugUse 2HD flpppy disk with 1.44MB capacityFormat of disk:Cylinders:80Tracks:160 Sectors/Track18 Bytes/Sector:512 DataTransfer rate:500 kbpsEncoding method:MFMFeatures:Use normal usb flash drive as the medium for transfer design.34pin floppy driver interface,5V DC power supply,easy to install.Capacity:1.44MB 2HD Cylinders:80 Tracks:160 Sectors/Track: 18 Bytes/Sector:512 DataTransfer rate:500 kbpsEncoding method:MFM.1000pcs partitions in usb flash drive can be used.Built-in self-format function.(read relevant documents to use this function)Jumpers with function for different machines(SFR1M44-U100K not support jumpers).Panel:8segment numbers:represent partitions numberGreen led:status of read and write operationUSB port:connect usb flash driveButton:Left button used to rise ten-digit,right button used to rise single-digit,press 2 button together torise hundred-digitOperation :Format usb flash drive.1.use built-in self-format function to format usb flash drive into 1000pcs partitions2.install an emulator on computer,and format every partitions by operate driver A.3.use emulator UFA1M44-100,plug usb flash drive on it,connect to computer,it will recognized as removabe driver A or B under WINDOWS XP/2000/7,format every partitions.UFA1M44-100 also built in self-format function.Read and write data.1.install emulator on machine2.install emulator on computer3.connect usb flash drive on computer,read and write data directory by software, under WINDOWS XP/20004.use emulator UFA1M44-100,plug usb flash drive on it, connect to computer,read and write data under WINDOWS XP/2000/7.

Read more less

1. USB floppy drive uses disk. External floppy drive can plug and play, no need driver. 2. The power of the USB floppy drive get from the USB port, no external power required. 3. Read/write 1.44 MB floppy disk. 4. External diskette drive with USB interface, USB 1.1/2.0/3.0 compatible. 5. Ultra slim and light weight case. 6. Interface: USB. 7. Fully USB powered, no power supply needed. 8. Data capacity: 1.44MB (formatted). 9. Data transfer rate: 250 Kbits (720KB) / 500 Kbits (1.44MB). 10. Material: ABS. 11. Size: 14x10x1.7cm.

Read more less

1. A variety of testing sessions, strict control. 2. Electroplating gold process, anti-oxidation, corrosion resistance, stable contact. 3. Featured memory particles. Parameters: 1. Applicable type: laptop. 2. Memory type: DDR. 3. Memory capacity: 1GB. 4. Number of pins: 200 pins. 5. Bandwidth: PC-2100. 6. Memory frequency: 266MHz. 7. Voltage: 2.5V.

Read more less

1. A variety of testing sessions, strict control. 2. Electroplating gold process, anti-oxidation, corrosion resistance, stable contact. 3. Featured memory particles. Parameters: 1. Applicable type: laptop. 2. Memory type: DDR2. 3. Memory capacity: 2GB. 4. Number of pins: 240 pins. 5. Bandwidth: PC2-5300. 6. Memory frequency: 667MHz. 7. Voltage: 1.8V.

Read more less

1. A variety of testing sessions, strict control. 2. Electroplating gold process, anti-oxidation, corrosion resistance, stable contact. 3. Featured memory particles. Parameters: 1. Applicable type: desktop PC. 2. Memory type: DDR2. 3. Memory capacity: 1GB. 4. Number of pins: 240 pins. 5. Bandwidth: PC2-4200. 6. Memory frequency: 533MHz. 7. Voltage: 1.8V.

Read more less

1. Graphics card cooling fan, large air volume, excellent heat dissipation performance, providing heat dissipation protection for overheated graphics cards. 2. 4-wire fan. 3. The fan is reliable in quality and has a long service life. 4. For Zotac GTX 1070 Mini GTX 1060 6GB GTX1060 graphics card cooling fan 5. Diameter: 85mm.

Read more less

1.CPU cooling fan, air volume up to 30CFM, excellent heat dissipation, providing thermal protection for overheated notebook processors. 2.4 line fan, which can automatically adjust the speed according to the CPU temperature. 3.The fan quality is reliable and the service life can reach 11 years.

Read more less

1.CPU cooling fan, excellent heat dissipation, providing thermal protection for overheated notebook processors. 2.4 line fan, which can automatically adjust the speed according to the CPU temperature. 3.The fan quality is reliable and the service life can reach 11 years.

Read more less

1) USB 2.0 External 7.1-Channel Audio Sound Card Adapter. 2) Compliant with USB 2.0 Full-Speed (12Mbps) Specification. 3) Compliant with USB Audio Device Class Specification 1.0. 4) Compliant with USB HID Class Specification 1.1 5) Driverless -No driver required for Windows 98SE/ ME/ 2000/ XP/ 7/ Server 2003/ Vista/ Linux, Mac OS. 6) Extend your stereo speaker or earphone to 7.1 channel environment. 7) LED indicators: Microphone-Mute Status, Activity 8) Powered directly via USB port. Work with either desktop or laptop. 9) Compact, portable, convenient to carry. 10) Device Type :USB 2.0 External 7.1-Channel Audio Sound Card Adapter 11) Interface Type: USB 2.0 12) Function Keys: Microphone-Mute, Speaker-Mute, Volume-Up, Volume-Down

Read more less

1. The USB virtual 7.1 channel sound adapter is a highly flexible audio interface which can be used with desktop or notebook systems 2. Bundled with Xear 30 sound simulation software 3. It turns your stereo speaker into 7.1 channel environment 4. No drivers required just plug and play for instant audio play, also compatible with all major operation systems

Read more less

1. Strong construction: the USB volume control is made of metal shell and ALPS rotary shaft, equipped with breathing light and 1.5m USB cable. 2. One key mute function: when you are listening to music, just press the knob, it will stop at once and back to music when you press again. 3. Once you connect it to computer by USB cable, it will start to work. 4. A great volume control tool for watching videos, playing games, wedding, meeting, celebration and other activities. 5. Easy operation: - Turning the knob to turn up and down volume - Press the knob to make it mute - Press down the knob and turn it to adjust volume more quickly - Keep pressing the knob for 8s, it will enter night mode, and breathing light will stay on. 6. Size: 6.5*5.5*4.5cm 7. Weight: 350g

Read more less

1) One 40pin IDE port 2) One Serial ata port 3) One 4pin power connector 4) Converts SEVIAL ata To paraller ATA 5) Supports ata 100/133 6) Compliant with Serial ATA specification

Read more less

1) Compact Flash to 2.5" IDE adapter provides an alternative for data storage 2) Fully 2.5" IDE compatible which allows them to be used as hard drive replacements for embedded applications 3) Low power consumption, low operating temperature, no acoustic noise, cost efficient and fast read access time 4) For connecting a CF to 2.5" IDE host interface 5) Transparent to the operating system and does not require any drives 6) The host PC will identify the inserted CF as standard 2.5" IDE HDD 7) FLOPPY DISK DRIVE POWER CONNECTOR 8) Master / slave jumper selectable 9) 2.5" IDE Male Connector 10) Product size: 51.85x42.15x6.50mm

Read more less

1) CF to PCMCIA adapter, CF card reader/writer for laptop or any other devices with PCMCIA slot. 2) Make data transfer easy and quickly. 3) Expand laptop PC and handheld devices storage. 4) Compact & portable design for easy carry. 5) One end is CF slot, which is compatible with CF card Type I. 6) Another end is PCMCIA type II interface, which is compatible with PCMCIA type II/III slot. 7) Plug & play and hot swapping capability. 8) Easy install & no driver required. 9) Self-powered mode, no external power required. 10) Compatible with Windows 98SE/ME/2000/XP. 11) Dimension: 53x85mm. 12) Weight: 23g.

Read more less

1. Fully compliant with PCI Express Base Specification Revision 2.0. 2. Single-lane (x1) PCI Express throughput rates up to 5Gbps. 3. Compliant with Universal Serial Bus 3.0 specification Revision 1.0. 4. Support simultaneous operation of multiple USB 3.0, USB 2.0and USB 1.1 devices. 5. Support the following speed data rates as follows: Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed(480Mbps) / Super-speed (5Gbps). 6. Each USB port supplies maximum +5V 900mA power output to USB device. 7. Built-in 4-pin power connector for receiving extra power supply from system. 8. Hot-swapping feature allows you to connect/disconnect deviceswithout powering down the system. 9. Support Windows 7 / XP / 32 & 64 bit Vista / 98ES / DOS / Linux / 2008 / 2003.

Read more less

1. M.2 NGFF & mSATA SSD to SATA III 7+15 Pin adapter card module 2. Allows user to use NGFF M.2 SATA or mSATA SSD as standard SSD in the desktop or laptop 3. Transparent to the operating system and does not require any software drivers 4. Short circuit protection 5. In-rush current suppression 6. Thermal shutdown protection

Read more less

1. Express Card to 2 USB 3.0 ports adapter. 2. Providing speeds up to 10x faster than that of USB 2.0, this PCI Express USB 3.0 card enables you to access your data and transfer files much faster than USB 2.0, by adding 2 additional USB 3.0 ports to your advice. 3. Featuring a native NEC PCI Express host controller chipset, the new USB3.0 standard supports transfer rates of up to 5Gbps, while still providing connectivity and support for the older USB 2.0 (High-Speed) and USB 1.1 (Full-Speed) devices. 4. In addition to providing a much faster transfer rate the USB 3.0 card also supplies 900mA of power per USB port, allowing more and more external devices to operate without the need of an additional power source. 5. Equipped with 5V power interface for the needs of high current equipment. 6. Suitable for for Laptop / Notebook with 54mm Express Card Slot. 7. Support Windows 2000 / XP / 2003 / 7 / 8, Vista, etc.

Read more less

1. M.2 NGFF Key A to Mini PCI-E for Intel 9260 8265 7260 Wireless Card 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less