Products

1. The cleaning pen is made of ABS+ aluminum alloy, which is beautiful and elegant. It adopts a double-head method, one end is brushed, and the other end is bamboo charcoal for cleaning, which can effectively remove fingerprints, dust, etc.2. Equipped with various cleaning tools, special funds are dedicated, can clean any part of the fuselage3. The storage bag is made of PU material, waterproof and easy to clean, easy to carry4. Storage bag size: 15x10x4cm5. Packing list: alcohol dry and wet pack*3, sensor cleaning stick*1, dual-purpose cleaning pen*1, brush*1, cleaning cloth*1, blowing balloon*1, round tip cotton swab*3, storage bag *1

Read more less

1. Using the principle of Yagi antenna to enhance the antenna model, the distance of the aircraft can be increased by 50-500 meters under the same signal interference strength of the flight environment2. Using ABS+pure copper, the signal enhancement effect is more obvious, wear resistance, corrosion resistance3. Simple and quick installation and disassembly, no need to change control, plug and play, non-destructive installation design4. Antenna size: 64.15x24.5mm5. Packing list: Yagi antenna*2, inner lining*1, packing box*1Note: The product does not include a remote control

Read more less

1. Effectively increase the height by 30MM to prevent ground debris from soiling the fuselage and damaging the gimbal during takeoff and landing 2. Foldable design, saving space and convenient storage 3. Tailored for FPV aircraft, will not block the power button, and will not affect the flight 4. Non-destructive quick disassembly and assembly design, easy disassembly and assembly, no need to worry about damaging the fuselage. 5. Material: ABS 6. Dimensions: -After unfolding: 16.7x11.7x7.8cm -After folding: 16.7x7.2x7cm

Read more less

1. Simple and convenient installation2. Simple operation, one-click delivery3. Can be used as a tripod to ensure the safety of take-off and landing4. Comes with down-view lights, accurate delivery at night5. Material: ABS6. Battery capacity: 100mAh7. Size: 14.3x9.5x4cm8. Packing list: dispenser + folding tripod*1, instruction manual*1, 1.5m fishing line*1

Read more less

1. Can store for AIR 2 aircraft and a full set of accessories 2. Fashionable appearance, easy to carry 3. Highly tight and waterproof, can withstand repeated sprinkling tests 4. Portable handle, strong load-bearing capacity, comfortable hand feel and not restrained, relieve hand pressure 5. Corrosion resistance, long service life 6. Size: 34x31x12cm 7. Weight: 1730g 8. Material: ABS

Read more less

1. Spesically design for DJI Mavic 3, hard shell design, wear-resistant and drop-resistant 2. Highly tight waterproof, can withstand repeated watering test; 3. High-density sponge, good flexibility, easy to store the drone body and its accessories 4. Portable handle, strong bearing capacity, comfortable hand feeling, relieve pressure 5. Material: ABS+high density sponge 6. Size: 39.8 x 36.8 x 13.5 cm

Read more less

1. Precise mold opening, small size and large capacity, can accommodate drones, charger + remote control + other small accessories at the same time2. PU leather fabric, exquisite appearance3. Two-way zipper, smooth and not stuck4. Unique rubber handle, easy to carry when going out5. Using nylon fabric webbing, easy to adjust the length, light and wear-resistant6. By adjusting the shoulder strap, the extra shoulder strap can be put into the hidden storage space on the back, and it can be easily turned into a handbag without affecting the appearance7. Size: 25x17x12.4cm8. Weight: 555g

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Protect your expensive lens from dust and scratch while not lowing your photo quality. 2. Significantly reduce lens flare and ghosting while making the filter anti-scratch, reduce reflection, increase surface durability, water resistant, oil & dust resistant. 3. ND filters washed out photos & video due to bright sunlight for better contrast & rich color. 4. Portable and durable, easy to install. 5. Lightweight, high transmittance and low reflectivity. 6. Note: Only include ND lens filter. 7. Material: PC material frame + ACG optical glass 8. Size: 2.14 x 1.7 x 0.4cm / 0.84 x 0.67 x 0.16 in 9. Weight: 0.7g

Read more less

1. Simple and not cumbersome, easy to connect 2. Use thicken metal plug to avoid oxidation and rust 3. Using tinned copper wire core, PVC wrap, shielding layer, improve efficiency 4. Connect directly to your phone for easy viewing of live images, convenient 5. Cable length: about 30cm

Read more less

1. Simple and not cumbersome, easy to connect 2. Use thicken metal plug to avoid oxidation and rust 3. Using tinned copper wire core, PVC wrap, shielding layer, improve efficiency 4. Connect directly to your phone for easy viewing of live images, convenient 5. Cable length: about 30cm

Read more less

1. 360-degree rotation, easy to operate, can easily complete various shooting angles such as horizontal/vertical shooting, tilt and reversal, and capture every wonderful moment. Use buttons and knobs to connect, press and hold the button to lock clockwise and unlock counterclockwise, which is more convenient and labor-saving. 2. It has a stable grip and is made of high-quality ABS+POM material. The clip is equipped with multiple rows of saw teeth and strong springs, giving the magnetic backpack clip a strong clamping force. It can be perfectly matched with various bag straps. There is no need to worry about the camera slipping off the backpack strap with the violent movement of the body, making the shooting more stable. It is an ideal choice for travel and walking, outdoor surfing, skydiving, hiking, skiing, snowboarding, and mountaineering. The perfect POV selfie stand for , off-road, cycling and other outdoor sports activities, freeing your hands. 3. A magnet is inserted into the bottom of the clip, which can be attached to any iron object, such as refrigerators, door frames, iron railings, etc., making it suitable for more scenarios. 4. There is a silicone pad attached to the bottom for more comfortable use. 5. Wide compatibility, through female action camera adapter, compatible with DJI Action 2 3 4, Osmo Pocket 2 / 3, GoPro, Insta360, Winglet, Xiaoyi, Dragon Touch, APEMAN, Crosstour, Apexcam, VEMONT, AKAIRIO , AKASO and more wearable action cameras. Please note: Keep the magnetic backpack clip away from items that are easily magnetized, such as floppy disks, credit cards, computer monitors, watches, medical equipment (pacemakers, cochlea, etc.)

Read more less

1. Fixed And Not Easy to Fall: The action camera backpack clip, three-speed buckle, fixed structure, the clip is tighter and does not fall 2. Multi-angle Adjusting: Multi-directional rotation, always maintain the shooting angle 3. Rotation: Can be adjusted left and right, 360 degree +180 degree left and right rotation adjustment, both horizontal and vertical screens can be shot 4. Adjustment: The adjustable buckle structure is tighter and will not slide when clamped on the backpack. It can be thin or thick. 5. Strong Load: Strong bearing capacity, stronger clamping force 6. Wide Compability: Standard sports camera interface, adapt to most sports cameras on the market; Mobile phone can also be clipped, suitable for most mobile phones on the market

Read more less

1. ND filter can prevent excessive exposure, make the picture have appropriate dynamic blur, more comfortable and smooth 2. Adopting a multi-layer coating dimming process to restore the true color 3. CPL filter provide color and contrast enhancement. It removes glare from non-metallic surfaces, such as windows and water 4. A single filter weighs only 1.6g, high-precision adaptation, will not affect the flight performance 5. Material: ABS+glass 6. Size: 3.16x2.64x1.12cm 7. Packing list: CPL filter x 1, ND16 filter x 1, ND32 filter x 1, ND64 filter x 1, cleaning cloth x 1

Read more less

1. Using the principle of Yagi antenna, formulate Mavic series universal booster, enhance the antenna model, under the same signal interference strength of the flight environment, the distance of the aircraft can be increased by 50-500 meters 2. Using ABS+ pure copper, after anodic oxidation treatment, enhance the texture, wear resistance, corrosion resistance 3. Simple and fast installation and disassembly, no need to change the control, plug and play, non-destructive installation design 4. Small size, easy to carry 5. Size: 7.2x6.5cm

Read more less

Features1. Exquisite workmanship and durability. Not easy to damage, more confident to deal with a variety of different wear and tear. 2. It can also help you cope when the landing place is wet. 3. The fabric is soft and provides cushioning when the plane is landing, allowing the plane to land smoothly. 4. Provide care for aircraft of different sizes and play with the peace of mind. 5. Colorful lighting effects, one-click switching.Specifications1. Material: cardboard+PU 2. Battery capacity: 450mAh 3. Size: 55 x 55 x 0.3cm

Read more less

Features1. Ultra-thin and excellent flexibility. The screen is not thick. You do not need to worry whether the reflexes of your camera would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your camera well and make a big difference on protecting your camera from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time.Package List1. Front screen film x 2 2. Rear screen film x 2 3. Lens film x 2 4. Clean cloth x 2 5. Wet & dry alcohol wipes x 2 6. Dust-absorber x 2

Read more less

1. Foldable design, convenient storage, easy to carry out2. PU leather fabric, waterproof and antifouling3. The four eyelet buttons can be freely combined and fixed when flying outdoors to increase the fun of flying4. Basically common to all types of drones5. Material: PU leather + glass fiber6. Packing list: apron*1, storage bag*1

Read more less

1. Spesically design for DJI Avata, hard shell design, wear-resistant and drop-resistant2. Highly tight waterproof, can withstand repeated watering test;3. High-density sponge, good flexibility, easy to store the drone body and its accessories4. Portable handle, strong bearing capacity, comfortable hand feeling, relieve pressure5. Material: ABS+high density sponge6. Size: 39.8 x 36.8 x 13.5 cm

Read more less

1. Specially designed for the Mavic 3 Pro series, it can accommodate the flying kit and master kit, such as: aircraft + RC PRO remote control + RC remote control + 4 pieces of flight batteries + charger + filter + charging butler + propellers + data line etc. 2. ABS material, hard shell design, wear-resistant and drop-resistant 3. Highly tight and waterproof, can withstand repeated watering tests 4. High-density sponge, good softness, easy to store accessories 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure 6. Size: 41.8 x 34.5 x 18.6cm

Read more less

1. Spesically design for DJI Avata, hard shell design, wear-resistant and drop-resistant2. Highly tight waterproof, can withstand repeated watering test;3. High-density sponge, good flexibility, easy to store the drone body and its accessories4. Portable handle, strong bearing capacity, comfortable hand feeling, relieve pressure5. Material: ABS+high density sponge6. Size: 39.8 x 36.8 x 13.5 cm

Read more less

1. Compatible with various models:- Headband: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head for first-person perspective shooting- Wrist strap: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head, wrist, or back of the hand for first-person perspective shooting2. The magnetic buckle design is easy to control and more convenient.3. Wide compatibility, multi-scenario application.4. Headband: Three rubber non-slip design elastic, adjustable size5. Wrist strap: Two wearing modes to choose from6. Material:- Wrist strap: velvet + aron + ABS- Headband: polyester+rubber+ABS7. Dimensions:- Wrist strap: 30 x 3.5 x 6.5cm- Headband: 27.8 x 5 x 6.5cm

Read more less

1. Compatible with various models:- Headband: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head for first-person perspective shooting- Wrist strap: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head, wrist, or back of the hand for first-person perspective shooting2. The magnetic buckle design is easy to control and more convenient.3. Wide compatibility, multi-scenario application.4. Headband: Three rubber non-slip design elastic, adjustable size5. Wrist strap: Two wearing modes to choose from6. Material:- Wrist strap: velvet + aron + ABS- Headband: polyester+rubber+ABS7. Dimensions:- Wrist strap: 30 x 3.5 x 6.5cm- Headband: 27.8 x 5 x 6.5cm

Read more less

1. Compatible with various models:- Headband: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head for first-person perspective shooting- Wrist strap: suitable for GoPro, Insta360, Action, Pocket and other series of sports cameras, the camera can be worn on the head, wrist, or back of the hand for first-person perspective shooting2. The magnetic buckle design is easy to control and more convenient.3. Wide compatibility, multi-scenario application.4. Headband: Three rubber non-slip design elastic, adjustable size5. Wrist strap: Two wearing modes to choose from6. Material:- Wrist strap: velvet + aron + ABS- Headband: polyester+rubber+ABS7. Dimensions:- Wrist strap: 30 x 3.5 x 6.5cm- Headband: 27.8 x 5 x 6.5cm

Read more less

1. Magnetic buckle + button design, easy to disassemble and assemble.2. First-person perspective, free your hands.3. Easy to tighten, with multiple elastic adjustment buckles to meet the wearing needs of different groups of people.4. High elastic breathable belt, comfortable to wear.5. Product material: ABS; Chest strap material: Nylon6. Packing list- Chest wear x 1- Magnetic quick release x 1- Suitable for GoPro Adapter Quarter Head x 1- M5 screw x 3- Long arm screw x 1- Jib arm screw x 1

Read more less

Features1. Immersive experience, the shooting screen has a stronger sense of substitution than the first-person shooting by hand. 2. After installing the camera, it can be adjusted up and down 180 degrees. 3. Breathable elastic band, comfortable headband, with silicone texture on the surface, non-slip and anti-off. 4. It can be adjusted according to the head circumference, and the adjustment range is 44-80cm, which is suitable for most head circumferences. 5. Two-in-one design, detachable to meet individual needsPackage List1. Headband x 1 2. Tripod adapter x 1 3. M5 screw x 1 4. Instruction manual x 1

Read more less

Features1. Immersive experience, the shooting screen has a stronger sense of substitution than the first-person shooting by hand. 2. After installing the camera, it can be adjusted up and down 180 degrees. 3. Breathable elastic band, comfortable headband, with silicone texture on the surface, non-slip and anti-off. 4. It can be adjusted according to the head circumference, and the adjustment range is 44-80cm, which is suitable for most head circumferences. 5. Two-in-one design, detachable to meet individual needsPackage List1. Headband x 1 2. Tripod adapter x 1 3. M5 screw x 1 4. Instruction manual x 1

Read more less

1. It is made of stainless steel, which is durable and does not rust 2. Configure 3 weights (20gx2+10gx1), the user can select the number of weights according to the weight of the device to achieve balance 3. The surface of the product is designed with rolling pattern, which is easy to install and hold, beautiful and generous. The top uses M3 screws, which can be matched with other equipment with M3 screw holes. 4. Specially used for DJI OSMO Mobile 3 / OM 4 to balance your smartphone gimbal video rig. 5. Note: Only counter weight included! No Gimble, no Lens, no Smartphone, no other accessories.

Read more less

1. High-strength aluminum alloy material + high-strength plastic, aluminum alloy bite design, strong stability. 2. Equipped with 1/4 adapter and action camera adapter, with rich interfaces and wide compatibility, it can be adapted to most action cameras on the market. 3. Multi-function double ball head on both ends, and locking ball head makes adjusting your camera to nearly any position quick and easy. 4. Simply loosen the knob, and rotate, tilt and pan your camera or camcorder with complete fluidity. 5. It can provide shake-free stability and supports to cameras while shooting. 6. Lightweight and portable, it can be used with suction cups, handlebar clips, motorcycle helmet mounts and other equipment. Specifications: 1. Main body size: 5.8 x 3.2 x 2cm 2. Action camera male connector size: 3.9 x 1.7cm 3. 1/4 ball head size: 3.4 x 2.8cm 4. Action camera female connector size: 4.8 x 3.5cm 5. Cold shoe ball head size: 3.4 x 2.55cm

Read more less

1. Material: Plush cloth + aluminized insulation film2. Output interface: USB3. Input voltage: 5V4. Insulation range: 30-60 degrees Celsius5. Used for battery heating and heat preservation6. Foldable, does not occupy space, and is easy to carry7. It can effectively restore battery discharge performance at low temperatures8. Large capacity, strong storage capacity, wide application range9. The wire is made of low temperature resistant TPE cold-proof wire, and the quality is guaranteed10. It can heat and keep all kinds of aeromodelling batteries, basically all the batteries on the market can be used11. Connect to a mobile power supply or 5V2A power supply to work normally, automatic power off at high temperature, automatic heating at low temperature, high safety12. Size: 260x150x10mm13. Net weight: 66.5g14. Shipment Only includes insulation bag and USB cable, Not others

Read more less

1. Made of high quality nylon material, durable and useful. 2. Light weight and small size, it is convenient to carry and use. 3. Feature Securely attaches camera housing to handlebars seatposts. 4. Two kinds of silicone pads, suitable for different diameters of handlebars or bars; 5. With adapters compatible with a variety of sports cameras. 6. Widely used to install panoramic cameras, sports cameras, mobile phones, convenient for the first perspective shooting, can be used for live broadcast, selfie, etc.

Read more less

1. The soft silicone strap will not scratch and pinch the paddle. 2. The side is made of ABS material, which is durable and easy to clamp 3. Ingenious anti-release buckle design, fast folding, convenient and quick 4. Small size, light weight, easy to store, can be stored directly in the original bag. 5. Designed for DJI Mini 3 to prevent propeller damage due to movement.

Read more less

1. The soft silicone strap will not scratch and pinch the paddle. 2. The side is made of ABS material, which is durable and easy to clamp 3. Ingenious anti-release buckle design, fast folding, convenient and quick 4. Small size, light weight, easy to store, can be stored directly in the original bag. 5. Designed for DJI Mini 3 to prevent propeller damage due to movement.

Read more less

1. The middle is made of soft silicone material, which will not scratch the squeeze blades 2. The side is made of ABS material, which is durable and easy to clamp 3. Ingenious anti-release buckle design, fast folding, convenient and quick 4. Small size, light weight, easy to store, can be stored directly in the original bag. 5. Designed for DJI Mavic Air 2 to prevent propeller damage due to movement.

Read more less

1. Material: PLA, sponge. 2. Designed for DJI Mavic Mini, lightweight and compact. 3. Multi-purpose function, you can do buoyancy bar and can be used as landing gear. 4. Made of PLA material, 3D printing process, arch shape, beautiful wear resistance. 5. Fine workmanship and good style. It is safe, stable and reliable.

Read more less

Features1. Lightweight design, will not bring excessive load to the drone; 2. Simple and convenient installation and disassembly, no additional tools are required; 3. Not only can be used as a buoyancy rod, but also can be used as a heightening tripod 4. Effectively increase the height by 60mm, effectively prevent the ground swag from contaminating the drone, and better protect the drone and the gimbal; 5. It is designed for DJI Mavic 3, and it is perfectly integrated, coordinated and beautiful with the fuselage; 6. The top is equipped with a 1/4 screw hole, multi-functional expansion, wide range of uses, can be equipped with a variety of action cameras or fill lights.Package List1. Buoyancy rod x 2 2. Buoyancy rod main body x 1 3. Buoyancy rod button x 4 4. Buoyancy rod body bracket x 1 5. M5 screw x 1 6. Adapter x 1 7. Double head screw x 1 8. Silicone pad x 2 9. M3 screw x 1 10. Manual x 1

Read more less

1. Suitable for Mavic2/Insta360 ONE X/GoPro 2. Size: 9.3x8.5cm

Read more less

1. Includes mini storage bag x1, carabiner x1, hand rope x1, suitable for ACTION 4 /3 series, GoPro series, INSTA360 GO3 (can be equipped with protective frame). 2. The exterior is made of high-quality PU fabric, waterproof, moisture-proof and dust-proof, keeping your camera lens safe and sound from any potential external dangers, scratches, dust, scratches and normal wear and tear. The inner black double-layer Lycra fabric provides greater protection for the camera lens. 3. Quick release design, the zipper is semi-open and cannot be completely closed. It can be quickly connected to any shooting equipment (such as a tripod or selfie stick). The camera can be quickly stored without removing the tripod or monopod, making it easy to use. With the mountaineering buckle and hand rope, it can be hung on backpacks and other accessories without worrying about the buckle falling off. 4. Mini size, compact and portable, you can carry it with you with the provided hand strap, or you can easily put it into a backpack, handbag, suitcase or hand luggage backpack and carry it with you. 5. Size: 104x69x46mm

Read more less

1. During the day when the sun is strong, it can effectively block the reflection that affects the screen of the mobile phone, and protect the eyes from the stimulation of the reflection. 2. Magnetic folding design, shading without shadowing operation 3. Black suede PU material, can suppress the screen reflection, no reflection 4. It can be used for DJI OM 5/ OM 4 SE/ OM 4 handheld gimbal at the same time (a silicone ring is required when using OM 5) 5. The surface is super-fiber skin-feeling PU fabric, which is comfortable to the hand, not easy to be deformed, and not easy to stain dust

Read more less

1. ND filter can prevent excessive light exposure and make the picture have appropriate dynamic blur. CPL adjustable filter, the brightness changes continuously with the rotation of the lens, making the picture more comfortable and smooth 2. Adopting multi-layer coating light reduction technology to restore the true colors 3. Magnetic fast disassembly and assembly design, the original lens will not be damaged during installation 4. A single filter weighs only 4.4g, high-precision adaptation, will not affect the flight performance 5. Material: Aluminum alloy frame + ACG optical glass 6. Size: 10.8 x 9.8 x 1.7cm

Read more less

1. ND filter can prevent excessive light exposure and make the picture have appropriate dynamic blur. CPL adjustable filter, the brightness changes continuously with the rotation of the lens, making the picture more comfortable and smooth 2. Adopting multi-layer coating light reduction technology to restore the true colors 3. Magnetic fast disassembly and assembly design, the original lens will not be damaged during installation 4. A single filter weighs only 4.4g, high-precision adaptation, will not affect the flight performance 5. Material: aluminum alloy frame + ACG optical glass 6. Size: 10.8 x 9.8 x 1.7cm

Read more less

1. Designed for DJI MIC, easy to store all accessories; 2. One-piece inner support effectively protects the MIC main body and accessories; 3. Equipped with carabiner, easy to travel, small size, can be directly placed in a backpack or external backpack, or directly carried by hand rope, anti-lost and anti-fall; 4. Carbon pattern PU fabric material, waterproof and anti-fouling. 5. Zipper mesh bag can accommodate smaller accessories such as data cable. 6. With water repellent effect, protect your device and accessories safely

Read more less

Features1. Portable and lightweight 2. Stable and reliable 3. Long-lasting battery life, built-in large-capacity lithium battery 4. Long-distance transmission, supporting calls at altitudes up to 3 kilometers 5. Applicable to a wide range of models, suitable for DJI Mini series, Air series, Mavic series dronesPackage List1. Megaphone x 1 2. Walkie-talkie x 1 3. Charging cable x 1 4. Fixing bracket x 1 5. Hand screw x 1 6. Large silicone ring x 1 7. Small silicone ring x 1 8. Instruction manual x 1

Read more less

1. After complete installation, it is in one shape, and the anti-collision is upgraded 2. It is used to isolate the blades, reduce the risk of blade injury, and avoid damage caused by foreign objects hitting the blades, improving flight safety 3. ABS PC material, fine workmanship, has a certain elasticity, easy to disassemble 4. It only weighs 91g and does not affect the normal flight of the drone 5. Dimensions: 305 x 178 x 55mm

Read more less

1. Effectively avoid crashes caused by high-speed rotating blades injuring people or damage to the blades during flight. 2. Effectively protect the blades from being scratched or broken. 3. The light weight does not affect the normal flight of the drone. 4. ABS PC material, fine workmanship, has a certain elasticity, easy to disassemble. 5. Dimensions: 32.9 x 4.78 x 12.9cm

Read more less

Features1. Bundled quick release and convenient design 2. PU material, soft and does not hurt the machine 3. Buckle the paddle can also be stored in the waterproof box, storage bag, small size 4. Lightweight and easy to carry, will not increase the drone weight 5. Effectively protects the propellers when during transport or storageSpecifications1. Material: PU 2. Size: 26.00 x 4.00 x 0.90cm / 10.24 in x 1.57 in x 0.35 in 3. Weight: 8.2g

Read more less

Features1. Suitable for drones, remote control cars, outdoor sports, etc. It is only 1.5 inches in size and weighs 11g. 2. Quick and non-destructive installation design, three fixing devices: glue, silicone ring, and Hook and Loop Fastener, can be freely attached to any suitable object such as drones, remote control cars, bicycles, motorcycles, helmets, etc. 3. Use 6 high-brightness LED lamp beads and select high-transparency and high-brightness shell materials, including 4 white light lamp beads, 1 red and 1 green lamp bead; It has a variety of different modes, single color always on, single color slow Flash (flash once every 1000ms, the same frequency as civil aviation), single-color fast flash (flash once every 500ms), two-color cycle, and three-color breathing cycle modes to meet your lighting preferences. 4. With memory function, the lighting mode before shutting down will be retained after shutting down. 5. Complying with FAA federal regulations, it provides 360-degree visibility and visibility of more than 3 miles for drones, making it easy to identify the direction and direction of drones. This is an essential small strobe light that helps improve the warning and visibility of objects. Identification helps prevent collisions and accidents. 6. It has a low battery reminder function. After shutting down, the green light flashes to indicate that the battery power is lower than 3.6V. Built-in rechargeable battery, rechargeable and reusable, the charging time is about 90 minutes, and the use time after full charge is about 4 hours (flash mode).Package List1. Strobe light x 1 2. Rubber ring x 2 3. Hook and Loop Fastene x 2 4. Adhesive x 2 5. Charging cable x 1 6. Instruction manual x 1

Read more less

1. Using the principle of Yagi antenna to enhance the antenna model, the distance of the aircraft can be increased by 50-500 meters under the same signal interference strength of the flight environment 2. Using ABS+pure copper, the signal enhancement effect is more obvious, wear resistance, corrosion resistance 3. Simple and quick installation and disassembly, no need to change control, plug and play, non-destructive installation design 4. Lightweight design will not bring excessive load to the aircraft 5. Size: 6x8.7x2cm 6. Shipping list: Yagi antenna x2, lining x1, packing box x1

Read more less