Battery Accessories

1. High energy density, long life 2. Nominal voltage: 9V 3. Can be used in these products: cameras, toys and many other electronic devices 4. Size: 48.6 x 26.0 X 17.0mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 6cm * 6cm / 3.94inch * 2.36inch * 2.36inch Qty per Carton 150 Carton Weight 8.50kgs / 18.74lb Carton Size 52cm * 38cm * 32cm / 20.47inch * 14.96inch * 12.6inch Loading Container 20GP: 421 cartons * 150 pcs = 63150 pcs 40HQ: 979 cartons * 150 pcs = 146850 pcs

Read more less

1. Model: USB2. Input voltage: DC5V 0.5-2A3. Output voltage: 3.6-3.7V4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of JST positive interface rechargeable batteries, support multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. Standard charging interface, firmly connected10. Note: To use this product, the battery must have a protective plate before it can be used11. Line length: 60cmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 13cm * 9cm * 3cm / 5.12inch * 3.54inch * 1.18inch Qty per Carton 132 Carton Weight 1.72kgs / 3.78lb Carton Size 41cm * 38cm * 35cm / 16.14inch * 14.96inch * 13.78inch Loading Container 20GP: 489 cartons * 132 pcs = 64548 pcs 40HQ: 1135 cartons * 132 pcs = 149820 pcs

Read more less

1. Model: USB2. Input parameters: 5.2V 0.5-2A3. Output parameters: 7.4V 1000mA4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of XH-3P interface rechargeable batteries, supporting multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. XH-3P standard charging interface, firmly connected10. Cable length: 56 cm (including plug)LED light prompt function:- Steady red light in no-load state- The charging status red light is always on, and the green light is flashing- Green light is always on when fully chargedSpecification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 15cm * 9cm * 3cm / 5.91inch * 3.54inch * 1.18inch Qty per Carton 132 Carton Weight 5.72kgs / 12.61lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 132 pcs = 61512 pcs 40HQ: 1083 cartons * 132 pcs = 142956 pcs

Read more less

1. Model: USB2. Input voltage: DC5V3. Output voltage: DC7.3V/2V4. Applicable: home appliances, toys5. Output current: 250MA/1000MA6. Output power: 1W/5W7. Rated power: 10W8. Suitable for all kinds of SM-2P interface rechargeable batteries, support multiple charging methods9. Aluminum alloy USB interface, good conductivity10. High-quality wire is not easy to break11. Standard charging interface, firmly connected12. Note: to use this product, the battery must have a protective plate before it can be usedSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 13cm * 9cm * 10cm / 5.12inch * 3.54inch * 3.94inch Qty per Carton 50 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 52cm * 28cm / 18.5inch * 20.47inch * 11.02inch Loading Container 20GP: 389 cartons * 50 pcs = 19450 pcs 40HQ: 904 cartons * 50 pcs = 45200 pcs

Read more less

1. Application of 1.2V and 3.7V rechargeable battery. 2. USB connect the power supply 5v input 1A charging. 3. Indepentdent line control charging: 400mAh+400mAh. 4. When in charging power indicator light is flashing red state. 5. Indicating lamp is charged when the flashling stops and becomes green. 6. Application of 1.2V and 3.7V rechargeable battery. 7. Such as: 1.2V/AA AAA, 3.7V/18650/18500/17650/16340/14500/10500 Li-ion Battery.Specification: Charger Parameters Model V6-2 Input Voltage 5V Input Current 1A Size 11.5*6*3.2cm Weight 70g Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 15cm * 8cm * 3.5cm / 5.91inch * 3.15inch * 1.38inch Qty per Carton 100 Carton Weight 10.50kgs / 23.15lb Carton Size 42cm * 32cm * 37cm / 16.54inch * 12.6inch * 14.57inch Loading Container 20GP: 536 cartons * 100 pcs = 53600 pcs 40HQ: 1244 cartons * 100 pcs = 124400 pcs

Read more less

1) No memory effect 2) Environmentally friendly 3) Battery Type: 18650 Rechargeable Battery 4) Voltage: 3.7v 5) Capacity: 3000mAh 6) Material: Li-ion Battery 7) Rechargeable times: Up to 1000 times 8) Compatible with: Battery appliances such as emergency lighting, portable devices, power tools 9) Size: 7cm x 2cm(Diameter)Specification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 7cm * 4cm * 2cm / 2.76inch * 1.57inch * 0.79inch Qty per Carton 250 Carton Weight 26.00kgs / 57.32lb Carton Size 37cm * 22cm * 22cm / 14.57inch * 8.66inch * 8.66inch Loading Container 20GP: 1489 cartons * 250 pcs = 372250 pcs 40HQ: 3456 cartons * 250 pcs = 864000 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

1. Material: Plastic2. This battery box is equipped with 6 AA rechargeable batteries, which can be used on small led fill lights for Shenniu, Ruiying, Yongnuo, Nanguan, Aitushi, Fulaishi, and Muse, which are equivalent to NP- F550 / 750 / F970, the best choice for backup battery when the camera is out of power, universal for led photography light below 15W, Sony interface3. Applicable models: Suitable for DV-16 / DV-112 / DV-160V / DV-216V4. Note: Do not use for camera5. The battery installation order is from inside to outside, please install the battery strictly according to the diagram.6. The batteries are not includedSpecification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs 40HQ: 412 cartons * 468 pcs = 192816 pcs

Read more less

1. Model: USB2. Input parameters: 5.2V 0.5-2A3. Output parameters: 3.7x2 1000mA4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of SM-4P rechargeable batteries, supporting multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. SM-4P standard charging interface, firmly connectedLED light prompt function:- Connect the charging cable to the power supply light- The red light is always on when the lithium battery is charged- Red light to green light means the lithium battery is fully chargedSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 13cm * 9cm * 3cm / 5.12inch * 3.54inch * 1.18inch Qty per Carton 132 Carton Weight 3.74kgs / 8.25lb Carton Size 41cm * 38cm * 35cm / 16.14inch * 14.96inch * 13.78inch Loading Container 20GP: 489 cartons * 132 pcs = 64548 pcs 40HQ: 1135 cartons * 132 pcs = 149820 pcs

Read more less

1. Size: 11.2*9*3cm 2. Weight: 150g 3. USB port output no-load voltage: 4.90-5.30V; designate slot 4 as USB output 4. Output current: 1000 m A 5. When the load is 1000 mA, the output voltage of the port is 4.75-5.25V. 6. Input power supply: Micro USB DC 5V/2A 7. Keyboard: In the case of electrification, hold down the selection key at any time and hold for 2 seconds to change the charging current of 500 mA 700 mA 1000 mA 2000 mA;When charging the battery, press the selection key to change the type of charging battery. When the type of charging battery needs to be selected (example 3.20V 3.85V), the battery will be charged for 5 seconds. 8. LED: The charger is connected with 5V power supply. All the LEDs of the charger are on at once. If the battery is not put into the charging tank, the 500mA (LED) indicator is always on and the other lights are off. When the battery is detected, four LED lights will be on and 3.7 LED lights will flicker. At this time, you can choose the type of battery to charge by pressing the button. If not, after 5 seconds, the battery will be charged by default identification. At this time, the charging indicator will flicker according to the corresponding power ratio. By pressing the button lightly, you can inquire about the charging type (without power indication) and return to the charging state after 5 seconds. When the battery is not powered on, load the battery and check the power ratio (5 seconds later, you need to check and press again). USB output indication: When the USB output is detected, the power indicator lights up 10 seconds later, and the button can check the power. 9. Compatible Batteries: Li-ion/IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR 123), 14500, 10440 Warning 1. The charger can only charge cylindrical lithium-ion batteries (3.7V, 3.8V), nickel-hydrogen/nickel-cadmium and lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Charge with 5V USB adapter (adapter current recommendation 2A); 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.Specification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 12.30kgs / 27.12lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 60 pcs = 32520 pcs 40HQ: 1259 cartons * 60 pcs = 75540 pcs

Read more less

1. 8-slot independent charging, which can charge eight AAA, AA, or four C or D batteries at the same time or at will 2. Fully power off to protect the battery. 3. LCD displays charging status. 4. With USB cable, universal 5. Light weight and portable. Product parameters: 1. Input: DC 5V / 2A, 50 / 60Hz. 2. Output: DC 1.2V / 1800mA. 3. Weight: 199.5g.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 60 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 47cm * 42cm / 20.47inch * 18.5inch * 16.54inch Loading Container 20GP: 259 cartons * 60 pcs = 15540 pcs 40HQ: 603 cartons * 60 pcs = 36180 pcs

Read more less

1. 8-slot independent charging, can charge eight AAA, AA batteries simultaneously or at will. 2. 100-240V voltage, universal worldwide. 3. 360-degree large area heat dissipation, reducing the load on the charger. 4. Intelligent chip, multiple protection, safer charging. 5. 38 copper core wires, corrosion-resistant, anti-oxidation, extend the life of the wires. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 2.4V 800mA. 3. Suitable for battery types: Ni-MH, Ni-Cd rechargeable batteries. 4. Size: 17.5x9x2.9cm. 5. Charging interface: external power supply. Packing list: Charger host x 1 Adapter x 1 Manual x 1Specification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 20cm * 11cm * 5cm / 7.87inch * 4.33inch * 1.97inch Qty per Carton 80 Carton Weight 13.40kgs / 29.54lb Carton Size 57cm * 42cm * 42cm / 22.44inch * 16.54inch * 16.54inch Loading Container 20GP: 265 cartons * 80 pcs = 21200 pcs 40HQ: 615 cartons * 80 pcs = 49200 pcs

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 14cm * 9.4cm * 5.7cm / 5.51inch * 3.7inch * 2.24inch Qty per Carton 84 Carton Weight 17.80kgs / 39.24lb Carton Size 44cm * 44cm * 42cm / 17.32inch * 17.32inch * 16.54inch Loading Container 20GP: 327 cartons * 84 pcs = 27468 pcs 40HQ: 761 cartons * 84 pcs = 63924 pcs

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 14cm * 9.4cm * 5.7cm / 5.51inch * 3.7inch * 2.24inch Qty per Carton 84 Carton Weight 17.80kgs / 39.24lb Carton Size 44cm * 44cm * 42cm / 17.32inch * 17.32inch * 16.54inch Loading Container 20GP: 327 cartons * 84 pcs = 27468 pcs 40HQ: 761 cartons * 84 pcs = 63924 pcs

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1Specification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 14cm * 9.4cm * 5.7cm / 5.51inch * 3.7inch * 2.24inch Qty per Carton 84 Carton Weight 17.80kgs / 39.24lb Carton Size 44cm * 44cm * 42cm / 17.32inch * 17.32inch * 16.54inch Loading Container 20GP: 327 cartons * 84 pcs = 27468 pcs 40HQ: 761 cartons * 84 pcs = 63924 pcs

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. Automatically trickle charging to protect the battery. 6. Car-mounted and discharge function, continuous power when going out. 7. Flip cover design to prevent damage to charger equipment. Product parameters: 1. Input: AC 100-240V, 110W (maximum), DC 12V 800mA. 2. Output: 4.8V 1000mA, 9V 25mA (AA / AAA / C / D: 1000mA with one and four currents). 3. Size: 19.5x9x5cm.Specification: Package Weight One Package Weight 0.40kgs / 0.87lb One Package Size 21.5cm * 11.3cm * 7.2cm / 8.46inch * 4.45inch * 2.83inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 46cm * 42cm / 19.69inch * 18.11inch * 16.54inch Loading Container 20GP: 276 cartons * 40 pcs = 11040 pcs 40HQ: 640 cartons * 40 pcs = 25600 pcs

Read more less

1. 4-slot independent charging, which can be used to charge AAA and AA batteries simultaneously or at will. 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. The flip cover design prevents the charger equipment from being damaged. Product parameters: 1. Input: AC 100-240V. 2. Output: 1.4V. 3. Charging current: 1200mA. 4. Charging time: 4 hours. 5. Size: 11.5x6.6x3.1cm.Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 150 Carton Weight 24.40kgs / 53.79lb Carton Size 52cm * 47cm * 42cm / 20.47inch * 18.5inch * 16.54inch Loading Container 20GP: 259 cartons * 150 pcs = 38850 pcs 40HQ: 603 cartons * 150 pcs = 90450 pcs

Read more less

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as chargingSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 45cm * 33cm * 42cm / 17.72inch * 12.99inch * 16.54inch Loading Container 20GP: 427 cartons * 20 pcs = 8540 pcs 40HQ: 992 cartons * 20 pcs = 19840 pcs

Read more less

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as chargingSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 45cm * 33cm * 42cm / 17.72inch * 12.99inch * 16.54inch Loading Container 20GP: 427 cartons * 20 pcs = 8540 pcs 40HQ: 992 cartons * 20 pcs = 19840 pcs

Read more less

1. Four-slot independent programming professional test charger2. Five functions: charge, discharge, discharge refresh, capacity test, internal resistance test3. Different models, different brands, and different capacities for mixed charging4. Mixed charging and discharging of any combination of 1-4 batteries5. The large-size white backlit display is convenient for users to check the working mode, battery parameters, etc.6. The scientific ventilation slot can quickly dissipate the heat inside the charger, ensure a good working environment for the circuit components, and prolong the service life7. Adopting high-integration large-scale single-chip microcomputer, with strong I/O performance, fast running speed and strong instruction set8. Temperature control design. The charger first relies on the metal sheet in close contact with the battery body to conduct the heat of the battery to the metal sheet, and then uses a temperature sensor-thermistor fixed with thermally conductive silica gel to convert the temperature into an electrical signal and send it to the microcontroller The port of the A/D converter is converted into a digital signal for the single-chip microcomputer to identify and perform corresponding processing according to the measured battery temperature value, temperature protection or normal charging, which guarantees the charging speed and the safety of battery charging9. The channels do not interfere with each other. Each battery can be fully charged and automatically stop charging. Under the premise of ensuring full charge, the battery will not be overcharged to damage the battery, which can extend the service life of the battery.10. Selection of the working mode of the charger: insert the battery and power on, the charger first self-checks, after the self-check is completed, press the MODE button for 5 seconds, the screen content starts to flash, and then press the MODE button successively. You can choose from five modes: CHARGE, DISCHARGE, DISCHARGE REFRESH, CHARGE TEST, and QUICK TEST. After selecting the working mode, wait for 10 seconds to automatically enter the newly selected working mode11. Charging mode: This mode intelligently charges the battery according to the default charging current or the current selected by the user. The default charging current is 400MA and blinking. At this time, you can press CURRENT to adjust the charging current, and you can choose the charging current 500mA / 700mA / 1000mA / 200mA / 300mA / 400mA / (Only in the case of one or four slots, it can reach 1000MA) It will automatically stop after being fully charged. The capacity shows the capacity charged to the battery this time, not the true capacity of the battery.12. Discharge mode: After this mode, the default discharge current is 300mA and flashes. At this time, you can press CURRENT to adjust the discharge current. The discharge current can be selected as 400mA / 500mA / 100mA / 200mA / Start to discharge according to the selected current, but the battery voltage reaches The discharge ends after 0.9v. This mode should be used periodically to ensure that the battery is kept in the best condition. Note that the battery is fully discharged after the discharge mode is completed. If necessary, you need to charge the battery immediately in the charging mode.13. Refresh mode: This mode adjusts the battery internally according to the discharge-charge-discharge-charge-discharge-charge mode to reduce the internal polarization of the battery. This mode is used to repair the battery with degraded performance, or the battery performance is degraded due to improper use.14. Capacity test mode: This mode is used to test the true capacity of the battery. It operates according to the process of charge-discharge-charge to perform a discharge test on a fully charged battery. The displayed capacity is the true capacity of the battery, which truly reflects that the battery can The power provided for electrical appliances can also be tested and judged whether the battery is good or bad.15. Internal resistance test mode: This mode is used to quickly test the internal resistance of the battery. In this working mode, the internal resistance of the battery is quantitatively measured at an average working current of 500 mA inside the machine. Since the internal resistance of rechargeable batteries is generally very low, there may be some fluctuations sometimes due to the oxidation of the polar surface of the battery and the surface contact resistance. If there is uncertainty about the content of the test, it is recommended to measure several times in different battery slots, and then take the average value.16. Button for adjusting current: After the self-check is completed, the charger first displays the battery voltage, and then displays the default current of 400mA and flashes. If you need to adjust the charging current, press the CURRENT button within 3 seconds to adjust in steps of 200mA Current, the display value is 500mA / 700mA / 1000mA / 100mA / 200mA / cycle display (if you only charge 1-2 batteries and put them in 1 and 4 slots, you can choose 1000MA charging current), after selecting the charging current, If there is no button operation within 10 seconds, the flashing current will stop flashing and enter the charging stage according to the set current, and the battery will automatically stop charging when the battery is full.17. Display parameter switch key: during charging and discharging, press DISPLAY key to cycle display between current, voltage, capacity and timeSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 45cm * 32cm / 16.54inch * 17.72inch * 12.6inch Loading Container 20GP: 440 cartons * 20 pcs = 8800 pcs 40HQ: 1023 cartons * 20 pcs = 20460 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Ordinary version:1. Output power: 12W2. Single USB output: 5V/0.1-2.1A3. Dual USB output: 5V/0.1-2.4A4. Micro USB input: 5V/2A5. Type-C/USB-C port input: 5V/2A6. Other features: long press or double-click the button to turn on the LED light, installed backwards not to burn the motherboardFlash charging / fast charging version:1. The first time you put the battery, you have to charge the rechargeable battery to activate the output2. Output power: 22.5W3. Power: 25W4. OUT 1 output: 5V/3.7A; 9V/2.5A; 12V/1.87A (support 5V side charging and discharge)5. OUT 2 output: 5V/3.7A, 3.3-5.5V/4.5A (VOOC/SCP), 9V/2.5A, 12V/1.87A (fast charging port supports 5V side charging and discharging, fast charging mode without handshake protocol only 5V output)6. Micro USB port input: 5V/3A, 9V/2A, 12V/1.5A7. Type-C/USB-C output: 5V/3.7A, 9V/2.22A, 3.3-11V/2A (PPS), 12V/1.67A (output only if PD protocol is supported)8. Type-C/USB-C input: 5V/3A, 9V/2A, 12V/1.5A9. Other features: double-click the button to turn on the LED lights, installed backwards not to burn the motherboard10. Fast charging specifications: need stable quality and data transfer charging cable, no handshake protocol only 5V output, fast charging protocol automatically adjusts the current and voltage to the applicable state after successful matchingMultiple protection, high reliability:1. Built-in input over-voltage, under-voltage protection2. Integrated output overcurrent, overvoltage, short-circuit protection3. Built-in battery overcharge, overdischarge and overcurrent protection4. Built-in IC over-temperature protection5. Integrated charge/discharge battery temperature NTC protection6. ESD 4KV, input (including CC pins) withstand voltage 25V1. Battery requirements: flat-head unprotected 18650 battery (65mm long), internal resistance of 60 milliohms or less, more than 1C discharge, do not use the dismantled battery placed for a long time, used more times, the use of dismantled batteries will affect the experience2. Can be repeatedly put into 6 18650 batteries, easy and convenient to replace the battery3. Rotate to the left (clockwise) for the lock, close the cover must be locked or the cover will fall out; replace the battery to the right (counterclockwise) to unlock, take out the cover, you can replace the battery, simple and convenient4. Note: installed in reverse does not burn the motherboard, but do not a positive and negative, broken skin battery to insulate, otherwise it will cause the battery short circuit burn spring (shipping does not include the battery)5. Size: about 14.2 x 8 x 2.3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 10cm / 5.91inch * 3.94inch * 3.94inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 12cm * 10cm / 6.3inch * 4.72inch * 3.94inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 16cm * 12cm * 10cm / 6.3inch * 4.72inch * 3.94inch Qty per Carton 50 Carton Weight 15.00kgs / 33.07lb Carton Size 58cm * 43cm * 36cm / 22.83inch * 16.93inch * 14.17inch Loading Container 20GP: 297 cartons * 50 pcs = 14850 pcs 40HQ: 689 cartons * 50 pcs = 34450 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 12cm * 12cm / 7.09inch * 4.72inch * 4.72inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 150 pcs = 53250 pcs 40HQ: 825 cartons * 150 pcs = 123750 pcs

Read more less

Type:Battery Storage Box1. Deck design, enough to accommodate multiple batteries2. Easy installation with a cable3. Material: plastic and metal4. Size: Rectangular5. Cable Length: 18cmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 16cm * 12cm * 12cm / 6.3inch * 4.72inch * 4.72inch Qty per Carton 50 Carton Weight 15.00kgs / 33.07lb Carton Size 58cm * 43cm * 43cm / 22.83inch * 16.93inch * 16.93inch Loading Container 20GP: 248 cartons * 50 pcs = 12400 pcs 40HQ: 577 cartons * 50 pcs = 28850 pcs

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understandingSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 8cm / 3.94inch * 3.94inch * 3.15inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 52cm * 52cm * 42cm / 20.47inch * 20.47inch * 16.54inch Loading Container 20GP: 234 cartons * 146 pcs = 34164 pcs 40HQ: 545 cartons * 146 pcs = 79570 pcs

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understandingSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 10cm * 12cm * 8cm / 3.94inch * 4.72inch * 3.15inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 46cm * 55cm * 37cm / 18.11inch * 21.65inch * 14.57inch Loading Container 20GP: 284 cartons * 98 pcs = 27832 pcs 40HQ: 661 cartons * 98 pcs = 64778 pcs

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understandingSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 12cm * 15cm * 8cm / 4.72inch * 5.91inch * 3.15inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs 40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understandingSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 15cm * 18cm * 8cm / 5.91inch * 7.09inch * 3.15inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs 40HQ: 412 cartons * 60 pcs = 24720 pcs

Read more less

1. Suitable for charging 18650 / 26650 / 14500 / 16340 / 18500 lithium batteries. 2. Each slot can be stretched to fit different size lithium batteries and can work independently. 3. The battery can be charged forward and reverse, overcharge protection, and accurate charge stop. 4. When charging, the display light is like a horse racing dynamic running light. 5. Input: AC 100-240V, 50/60Hz. 6. Output: DC 4.2V/2000mA. 7. Charging time: 2-5 hours. 8. Size: 13.5x6.5x3.5cm. 9. Cable length: 80cm (including plug length). 10. Note: Lithium batteries are not included.Specification: Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 19cm * 9cm * 5cm / 7.48inch * 3.54inch * 1.97inch Qty per Carton 80 Carton Weight 11.60kgs / 25.57lb Carton Size 47cm * 42cm * 40cm / 18.5inch * 16.54inch * 15.75inch Loading Container 20GP: 337 cartons * 80 pcs = 26960 pcs 40HQ: 784 cartons * 80 pcs = 62720 pcs

Read more less

1. Input: DC 5V 2A2. Output: 1. 2V 550mAx83. Applicable battery: AA/AAA (not included)4. 8 independent control slots5. The charging speed of AA battery is 500mAh per hour, and the charging speed of AAA battery is 250mAh per hour, so it takes about 2 hours to fully charge 1000mAh AA battery6. Battery charger with micro USB and USB-C ports7. Broken and alkaline batteries do not work with this charger, it will automatically shut off when the charge is not rechargeable, short circuited or defective8. The LCD display clearly shows you the charging status of each battery9. Total weight: 130g10. Dimensions: 128x90x28mmSpecification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 15cm * 11cm * 5cm / 5.91inch * 4.33inch * 1.97inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs 40HQ: 412 cartons * 194 pcs = 79928 pcs

Read more less

1. Material: ABS, electronic components2. Applicable battery type: NiMH/NiCd3. Battery size: AA/AAA4. Charging current: 0.2-2.2A5. Discharge current: 0.1-1.0A6. Discharge cut-off voltage: 0.9V7. Support battery capacity: 500-3200mAh8. Capacity protection: 3200mAh9. Input voltage: DC 12V 2.0A10. Mode: fast charge, charge, discharge, activate, activate11. Interactive LED status feedback, each independent working channel has an independent LED light, which is convenient to observe the charging status12. AV black and white screen with animated highlights13. Dimensions: 11.21 x 10.8 x 6.2 cm14. Net weight: 370 grams15. Note: Shipping without battery!Specification: Package Weight One Package Weight 0.42kgs / 0.93lb One Package Size 13.5cm * 12.5cm * 7cm / 5.31inch * 4.92inch * 2.76inch Qty per Carton 70 Carton Weight 30.00kgs / 66.14lb Carton Size 55cm * 51cm * 28cm / 21.65inch * 20.08inch * 11.02inch Loading Container 20GP: 339 cartons * 70 pcs = 23730 pcs 40HQ: 788 cartons * 70 pcs = 55160 pcs

Read more less

1. Material: ABS, electronic components2. Applicable battery type: NiMH/NiCd3. Battery size: AA/AAA4. Charging current: 0.2-2.2A5. Discharge current: 0.1-1.0A6. Discharge cut-off voltage: 0.9V7. Support battery capacity: 500-3200mAh8. Capacity protection: 3200mAh9. Input voltage: DC 12V 2.0A10. Mode: fast charge, charge, discharge, activate, activate11. Interactive LED status feedback, each independent working channel has an independent LED light, which is convenient to observe the charging status12. AV black and white screen with animated highlights13. Dimensions: 11.21 x 10.8 x 6.2 cm14. Net weight: 370 grams15. Note: Shipping without battery!Specification: Package Weight One Package Weight 0.42kgs / 0.93lb One Package Size 13.5cm * 12.5cm * 7cm / 5.31inch * 4.92inch * 2.76inch Qty per Carton 70 Carton Weight 30.00kgs / 66.14lb Carton Size 55cm * 51cm * 28cm / 21.65inch * 20.08inch * 11.02inch Loading Container 20GP: 339 cartons * 70 pcs = 23730 pcs 40HQ: 788 cartons * 70 pcs = 55160 pcs

Read more less

1. Input: DC 5V 1-2A2. Output: 4.2V 1A3. Power supply mode: USB direct plug4. Compatible battery models: 10440, 14500, 16340, 16650, 14650, 18350, 18500, 186505. Size: about 12 x 9 x 3cm6. Weight: about 106g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Slot design, can charge a variety of batteries, fasten the card position to avoid poor contact, convenient and effective2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Smart chip technology, overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge protection6. 5V USB power supply, average speed current limiting designSpecification: Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 20cm * 12cm * 4cm / 7.87inch * 4.72inch * 1.57inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs

Read more less

1. Retractable spring design, AAA/AA batteries can be recharged2. With a charging indicator, it will light up red when charging, and it will light up when fully charged3. USB interface, a variety of power supply methods, convenient and fast4. Rated power: 2-5W5. Input: DC 5V 1-2A6. Output: DC 1.2V 250mA7. Rechargeable battery: AAA/AA8. Charging time: about 3-5h9. Power interface: USB10. Dimensions: about 8.3 x 5 x 2.4 cm11. Weight: about 45 gramsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 12cm / 4.72inch * 3.15inch * 4.72inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs 40HQ: 412 cartons * 146 pcs = 60152 pcs

Read more less

1. Retractable spring design, AAA/AA batteries can be recharged2. With a charging indicator, it will light up red when charging, and it will light up when fully charged3. USB interface, a variety of power supply methods, convenient and fast4. Rated power: 2-5W5. Input: DC 5V 1-2A6. Output: DC 1.2V 250mA7. Rechargeable battery: AAA/AA8. Charging time: about 3-5h9. Power interface: USB10. Dimensions: about 8.3 x 6.3 x 2.4 cm11. Weight: about 45 grams12. Description: only the charger, not the battery in the pictureSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 12cm * 10cm * 12cm / 4.72inch * 3.94inch * 4.72inch Qty per Carton 122 Carton Weight 30.00kgs / 66.14lb Carton Size 59cm * 49cm * 59cm / 23.23inch * 19.29inch * 23.23inch Loading Container 20GP: 156 cartons * 122 pcs = 19032 pcs 40HQ: 362 cartons * 122 pcs = 44164 pcs

Read more less

1. Input: DC 5V 1-2A2. Output: 4.2V 1A3. Power supply mode: USB direct plug4. Compatible battery models: 10440, 14500, 16340, 16650, 18350, 18500, 18650, 266505. Size: about 12.5 x 7 x 2.5cm6. Weight: about 94.6g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 3 slots are controlled independently, without affecting each other5. Smart chip technology, overcharge/overcurrent/overtemperature/short circuit/reverse connection/overdischarge protection6. 5V USB power supply, average speed current limiting design, multiple power supply methods7. Using industrial plastic, strong impact resistance8. When the battery is fully charged, the indicator light turns red to prevent overchargingSpecification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Interface: Micro USB2. Input: DC 5V 1-2A3. Output: 1.2V 4.2/4.3mA4. Rechargeable battery: NI-MH/NI-CD AAA/AA5. Size: about 7.8 x 6.2 x 2.5cm6. Weight: about 39.2g7. Description: only the charger, excluding other items such as batteries in the pictureFeatures:1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. USB interface, a variety of charging methods, convenient and fast6. Multiple protection of overcharge/short circuit/reverse polarity protection, safe to useSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 200 Carton Weight 12.00kgs / 26.46lb Carton Size 34cm * 34cm * 30cm / 13.39inch * 13.39inch * 11.81inch Loading Container 20GP: 768 cartons * 200 pcs = 153600 pcs 40HQ: 1785 cartons * 200 pcs = 357000 pcs

Read more less