Bestselling Products
Original Battery Back Cover for Xiaomi Redmi Note 10 M2101K7AI M2101K7AG(Black)
1. Back cover replacement for Xiaomi Redmi Note 10 M2101K7AI M2101K7AG 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 501.96
Charging Port Board for Huawei MediaPad M5 10 / CMR-AL09 / CMR-W09
1. Charging port board replacement for Huawei MediaPad M5 10 / CMR-AL09 / CMR-W09. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 1,175.50
65W 5 Pin MagSafe Series to USB-C / Type-C Converter for MacBook (White)
1. Power: 65W 2. Input: 5V/9V/12V/15V, 3A; 20V/2.25A(input>=20V) 3. PPS:3-12V, 3A(PD 4.0 support) 4. Plug and play, easy to use 5. Small size, portable to carry 6. Product material: PC 7. Product size: 72x30x17mm 8. Cable total length: about 10cm
Rs. 2,106.40
2pcs For Sony PS4 7.1 PlayStation Platinum CECHYA-0090 Earphone Cushion Cover Earmuffs Replacement Earpads Without Mesh
1. Material: cashmere fabric 2. Soft and comfortable, it can be worn for a long time without fatigue 3. Good air permeability, not easy to crack 4. Easy to replace 5. Good quality and long service life 6. There is no net cloth in the middle of the product
Rs. 1,031.30
For Samsung Galaxy A52 5G / A52 4G Battery Back Cover with Camera Lens Cover (Black)
1. Back cover replacement for Samsung Galaxy A52 5G/4G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 620.60
2mm Double Sided Adhesive Sticker Tape for iPhone / Samsung / HTC Mobile Phone Touch Panel Repair, Length: 50m(Black)
1. This is the inevitable adhesive which holds the touch screen in position 2. Heat-Resistant, easy to adhesive, strong adhesive ability 3. Adhesive Type: Pressure sensitive double sided 4. Width: 2mm 5. Length: 50m 6. Tape diameter: 16.5cm
Rs. 399.74
JIAFA P8822 Super Suction Repair Separation Sucker Tool for Phone Screen / Glass Back Cover(Black)
1. Easy to separate glass back cover or screen with the aid of this tool 2. Compact design and lightweight 3. Various colors available 4. Suction cup diameter: 55mm
Rs. 360.50
2600mAh Rechargeable Li-ion Battery for Galaxy J3 Pro / J3110 / J3 2016 / G530 / J5 2015 / J500 / J5009 / G531F
About the product1. 2600mAh Rechargeable Li-ion Battery for Samsung Galaxy J3 Pro / J3110 / J3 2016 / G530 / J5 2015 / J500 / J5009 / G531F / J500FN 2. Best replacement for the original battery with comparable standby and talk time 3. The Li-ion battery provides excellent continuous power sources to your device 4. Use the authorized charger only 5. If you don't use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months 6. Compared with Nickel-Cadmium battery, the Li-ion battery has no memory effect 7. Integrated microchip inside prevents overcharging and lengthens battery life WarningTo reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water
Rs. 910.83
DC Power Jack Connector Flex Cable for HP Pavilion 15 / 15-e & 17 / 17-e
1. DC Power Jack Connector Flex Cable replacement for HP Pavilion 15 / 15-e & 17 / 17-e 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts
Rs. 582.27
LCD Flex Cable for iMac 21.5 inch A1311 (2011) 593-1350
1. High quality LCD Flex Cable for iMac 21.5 inch A1311 (2011) 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts
Rs. 1,431.04
3 PCS Battery Screws For MacBook Pro A1706 / A1707 / A1708 / A1989 / A1990 / A2251 / A2159 / A2289
1. Battery screws for MacBook Pro A1706 / A1707 / A1708 / A1989 / A1990 / A2251 / A2159 / A2289. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 440.81
OEM LCD Screen for Asus Zenfone Max Pro (M2) ZB631KL with Digitizer Full Assembly (Black)
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Asus Zenfone Max Pro (M2) ZB631KL. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Rs. 2,603.80
Back Camera Lens for Asus Zenfone 6 ZS630KL l01WD
1. Replacement back camera lens for Asus Zenfone 6 ZS630KL l01WD. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 360.50
Front Housing Adhesive for Miscrosoft Surface Book / Book 2 13.5 inch
1. Replacement front housing adhesive for Miscrosoft Surface Book / Book 2 13.5 inch 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 684.49
Charging Port Flex Cable for Lenovo YOGA Tab 3 10 inch YT3-X50L YT3-X50f YT3-X50 YT3-X50m p5100
1. High quality charging port flex cable replacement for Lenovo YOGA Tab 3 10 inch. 2. Replace your broken or unworkable charging port flex cable with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 755.68
Charging Port Board for Xiaomi Redmi K20 / Redmi K20 Pro / Mi 9T / Mi 9T Pro
1. Charging port board replacement for Xiaomi Redmi K20 / Redmi K20 Pro / Mi 9T / Mi 9T Pro. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 522.95
Battery Back Cover with Camera Lens & Fingerprint Sensor for LG G6 / H870 / H870DS / H872 / LS993 / VS998 / US997(Grey)
1. Back cover with camera Lens & fingerprint sensor replacement for LG G6 / H870 / H870DS / H872 / LS993 / VS998 / US997 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 1,431.04
LCD Screen and Digitizer Full Assembly for Nokia 7 Plus / E9 Plus(Black)
About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 7 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and be cautious not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
Rs. 1,960.38
Original Charging Port Board for Nokia 7.1 / TA-1100 / TA-1097 / TA-1085 / TA-1095 / TA-1096
1. Charging port board replacement for Nokia 7.1 / TA-1100 / TA-1097 / TA-1085 / TA-1095 / TA-1096. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 869.76
TFT LCD Screen for Motorola Moto G7 Plus with Digitizer Full Assembly (Black)
About the product1. Replacement LCD screen + touch screen digitizer assembly for Motorola Moto G7 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
Rs. 2,094.54
TFT LCD Screen for Motorola Moto G8 Power Lite with Digitizer Full Assembly
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G8 Power Lite. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Rs. 1,688.41
For OnePlus 6 Charging Port Flex Cable
1. High quality charging port flex cable replacement for OnePlus 6. 2. Replace your broken or unworkable charging port flex cable with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 620.60
For OnePlus 5T A5010 TFT Material LCD Screen and Digitizer Full Assembly with Frame (Black)
About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for OnePlus 5T A5010 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
Rs. 3,983.73
Rs. 399.74
GameSir F4 Foldable Eagle Wing Shaped Physical Direct Connect Capacitor Gamepad Compatible with IOS & Android System Devices
1. 4 levels of capacitance trigger, can set 9 shots per second 2. Adopt capacitance mapping technology, click trigger is more stable and more sensitive 3. E-sports mouse-level touch switch, high sensitivity, crisp feedback, fast response, No delay in pressing, can quickly open the mirror shot 4. Smart switch design, pull to start, retract to shut down 5. At the junction of the inside and the side of the mobile phone, a groove design is used to provide enough space for the side keys of the mobile phone, which can prevent accidental touch when playing the game. Machine fitting is more stable 6. 90mAh large capacity battery, strong battery life 7. Follow the ergonomic design in appearance, skin-friendly feel, fit fingers and Grip posture, comfortable and natural to play, no fatigue at all for long hours 8. Type-C interface design, just plug in front and back 9. Support mainstream models of major mobile phone brands in the market 10. Compact one-piece body, flexible foldable design, no trouble when going out to store Product parameters: 1. Applicable platform: Touch screen mobile phone (IOS/Android) 2. Connection method: ready to use 3. Applicable games: Mobile phone games that can drag virtual buttons 4. Battery capacity: 90mAh 5. Applicable mobile phone size: thickness within 10mm, width within 66-82mm, length within 170mm 6. Life time: more than 40 hours 7. Product material: PC 8. Product size: 82x45x25mm 9. Product weight: 50g
Rs. 2,841.09
3.5 inch HDD External Case, Support IDE Hard Drive, EU Plug (Silver)
1. Human nature design, easy installation 2. Driverless(except of win98) 3. Super slim and easy portability 4. The maximum support capacity 400GB 5. External power Supply 6. AC input: 100-240V/50-60Hz 7. DC output: 5V/12V 8. Shell material: Aluminum 9. Dimension: 185x110x33mm 10. Supports Windows 98/SE/ME/2000/XP, Mac OS8.6 or latest version
Rs. 1,524.13
Home Button Retaining Brackets+Pad for iPad 10.2 inch / A2200 / A2198 / A2232
About the product1. Replacement home button retaining bracket + pad for iPad 10.2 inch / A2200 / A2198 / A2232 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Rs. 360.50
For Apple MacBook Pro 13.3 inch Dark Screen Non-Working Fake Dummy Display Model (Silver)
1. Dark screen display model for Apple MacBook Pro 13.3 inch. 2. It is a non-working fake dummy model. 3. One to one simulation. 4. Firm and durable.
Rs. 3,043.69
1 Pair Soft Foam Headphone Jacket Earmuffs for Marshall MAJOR II / I(Black)
1. For Marshall MAJOR II / I. 2. Made of protein memory cotton, it is fine and soft, with good elastic shrinkage and micro-retracting effect. 3. Can be slip resistant. 4. It can prevent leakage and enhance the effect of bass. 5. When the volume is too loud, you can prevent resonance between the earbuds and the ear bones.
Rs. 641.59
For Plantronics Backbeat Pro 2 / Voyager 8200UC Earphone Cushion Cover Earmuffs Replacement Earpads(Black)
1. Material: cashmere fabric 2. Soft and comfortable, it can be worn for a long time without fatigue 3. Good air permeability, not easy to crack 4. Easy to replace 5. Good quality and long service life
Rs. 1,441.99
2pcs Sponge Headphone Protective Case for Sony MDR-ZX770BN
1. The protective cover is beautiful, dustproof and antifouling 2. Soft and comfortable, and will not feel tired after wearing it for a long time 3. Good air permeability, not easy to crack 4. Easy to replace 5. Good quality and long service life 6. Net cloth in the middle of the product
Rs. 915.39
Original Huawei FreeLace CM70-C Bluetooth 5.0 Waterproof Hanging Neck Sports In-ear Bluetooth Headset(Black)
1. Bluetooth Version: 5.0 2. Headphone Material: Memory Metal, Liquid Silica Gel 3. It conforms to ergonomic design. It not only keeps comfortable fit with neck, but also folds and receives conveniently when traveling, and is not easy to winding. 4. Use 3C high-efficiency small lithium battery, charge for 5 minutes, play for 4 hours, full power can listen to music for 18 hours continuously. 5. Intelligent magnetic suction switch to save electricity 6. Waterproof function
Rs. 9,678.68
Original Huawei FreeLace CM70-C Bluetooth 5.0 Waterproof Hanging Neck Sports In-ear Bluetooth Headset(Emerald)
1. Bluetooth Version: 5.0 2. Headphone Material: Memory Metal, Liquid Silica Gel 3. It conforms to ergonomic design. It not only keeps comfortable fit with neck, but also folds and receives conveniently when traveling, and is not easy to winding. 4. Use 3C high-efficiency small lithium battery, charge for 5 minutes, play for 4 hours, full power can listen to music for 18 hours continuously. 5. Intelligent magnetic suction switch to save electricity 6. Waterproof function
Rs. 7,214.52
Rear Hanging Wire-Controlled Bone Conduction Outdoor Sports Headphone(Orange)
1. Rear-mounted, ergonomic, five-sided curved line fits the head design, with lightweight materials, simple and comfortable. 2. Bone conduction earphones, do not hurt the eardrum, remove the deep silicone ear cap to achieve painless wear. 3. Bilateral stereo, sound quality fidelity. 4. Compatible with major mainstream music apps. 5. With voice control, call function.
Rs. 2,646.69
Fingerprint Sensor Flex Cable for Google Pixel 4a(Black)
1. Fingerprint sensor flex cable for Google Pixel 4a. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 438.07
Fingerprint Sensor Flex Cable Extension for iPhone 7 Plus
1. Fingerprint sensor flex cable extension replacement for iPhone 7 Plus. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 504.70
Power Button Flex Cable & Flashlight Flex Cable for iPhone 11
1. Power flex cable & flashlight flex cable for iPhone 11 2. Replace your broken or unworkable one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 723.73
TFT LCD Screen for Xiaomi Redmi Note 8 Pro with Digitizer Full Assembly(Black)
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Xiaomi Redmi Note 8 Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Rs. 2,112.79
Charging Port Board for Huawei MediaPad M5 lite 10.1
1. Charging port board replacement for Huawei MediaPad M5 lite 10.1. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 983.84
For OnePlus 7 Pro Original Back Housing Cover Adhesive
1. Back housing cover adhesive for OnePlus 7 Pro. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 399.74
Fingerprint Sensor Flex Cable Extension for Huawei Honor View 20
1. Fingerprint sensor flex cable extension replacement for Huawei Honor View 20. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 360.50
SIM Card Tray for Google Pixel 4 / Pixel 4XL(Black)
1. SIM card tray for Google Pixel 4 / Pixel 4XL. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
Rs. 360.50
For Samsung Galaxy S10 G973F/DS G973U G973 SM-G973 Transparent Battery Back Cover with Camera Lens Cover (Transparent)
1. Back cover replacement for Samsung Galaxy S10 G973F/DS G973U G973 SM-G973 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
Rs. 684.49
For Galaxy A70 / A705F Charging Port Board
1. Charging port board replacement for Samsung Galaxy A70 / A705F. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 760.24
Charging Port Board for Samsung Galaxy Tab S2 9.7 / SM-T810 / SM-T813 / SM-T815 / SM-T817 / SM-T819
1. Charging port board replacement for Samsung Galaxy Tab S2 9.7 / SM-T810 / SM-T813 / SM-T815 / SM-T817 / SM-T819. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
Rs. 1,031.30
incell LCD Screen for Galaxy A7 (2018) A750F/DS, A750G, A750FN/DS With Digitizer Full Assembly (Black)
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly (incell) for Samsung Galaxy A7 (2018) A750F/DS, A750G, A750FN/DS. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Rs. 2,298.06
For Fitbit Charge 6 USB Port Smart Watch Charging Cable, Length:50cm
1. Output short circuit protection2. Overvoltage and overload filter protection3. Using imported components, the aging safety performance is high after real machine testing.4. Good anti-interference performance5. Small DC ripple, high working efficiency and fast charging speed6. Low operating temperature and long service life
Rs. 556.72
For JBL Charge 3 / 4 / 5 Flip 4 / 5 / 6 Bluetooth Speaker Wall Retractable Storage Bracket(Black)
1. A creatively designed Bluetooth speaker support bracket that can be installed on the wall, on the top/side/bottom of the table, on a tripod, etc.2. The two-way strong spring buckle can fix the speaker more firmly, making it more convenient to use and can be operated with one hand. The speaker also looks more three-dimensional after being fixed.3. At the contact position of the speaker, we also added cushioning EVA cotton, which can better protect the speaker and reduce friction.4. The length of the bracket can be adjusted from 18 to 23 cm5. Applicable equipment: suitable for JBL charge 3/4/5 and JBL flip 4/5/66. Product material: galvanized steel plate
Rs. 2,065.33