Bicycle Parts

1. Size: 270x130mm2. Material: leather with polyurethane foam pad (not sponge material, polyurethane is more environmentally friendly than sponge)3. Suitable for mountain bikes, road bikes, folding bikes4. Excellent foaming can reduce the pressure on the buttocks and reduce the discomfort caused by vibration, suitable for long-distance riding5. The size is suitable for a variety of different riding styles and body types, and it is soft, comfortable and beautiful.

Read more less

1. Weight: about 660 grams2. Size: about 26x20 cm3. Material: PU leather + foam pad4. Application: mountain bike5. Features: leather surface, wear-resistant and tear-resistant, comfortable to touch, waterproof and rainproof, hollow design, comfortable and breathable, healthy and safe, sedentary without deformation, fine workmanship, beautiful seams, moderate soft and hard foam pads

Read more less

1. Material: Plastic2. Dimensions: front fender (front) 23x7.6x4.4 cm, front fender (rear): 33.4x8.2x4.2 cm; rear fender: 56.5x8.7 cm3. Weight: about 600 grams4. Adopt simple quick disassembly design, disassembly is simple, convenient and stable front and rear ends5. Adopting rubber arc design, can block water and mud6. Generally suitable for mountain bikes with holes in the front fork. A small number of bicycles with too large fork holes can be fitted with inner tubes or rubber sheets to make the installation more stable7. The rear LEF taillight design provides a guarantee for your safety during night riding.

Read more less

Details:1. Weight: about 720 grams2. Size: about 26x21 cm3. Material: PU leather + sponge4. Application: bicycles, mountain bikes, road bikes5. Seat tube diameter range: 2.0-2.3 cmFeatures:1. The base adopts high elastic shock-absorbing ball to increase the cushioning force, comfortable shock absorption, and not easy to break2. Thickened high-density sponge inside, comfortable and shock absorption3. Wear-resistant leather on the surface, comfortable to the touch, non-wearing pants, durable4. Hollow design cushion, comfortable and breathable5. The rear seat has a warning reflective tape to improve the safety of riding at night6. The rear side is widened on both sides, and the front side is narrowed, which does not hinder riding

Read more less

1. Weight: about 560 grams2. Size: about 27x14 cm3. Material: polyurethane, seat skin, steel bow4. Application: mountain bike5. Features: the front narrow side is round, the sides are widened, do not hinder the thigh pedaling, hollow air guide, comfortable and breathable, long-term sitting without sultry heat, the base adopts an arc design, shock absorption increases the cushioning force, comfortable sitting feeling, and flexibility it is good

Read more less

1. Weight: about 560 grams2. Size: about 27x14 cm3. Material: polyurethane, seat skin, steel bow4. Application: mountain bike5. Features: the front narrow side is round, the sides are widened, do not hinder the thigh pedaling, hollow air guide, comfortable and breathable, long-term sitting without sultry heat, the base adopts an arc design, shock absorption increases the cushioning force, comfortable sitting feeling, and flexibility it is good

Read more less

1. 6061 Aluminum alloy construction platform, lightweight. 2. DU sealed bearings, slight friction, wear-resisting, durable use 3. Forged CR-MO axle spindle, strength improved 4. 9 nails at each side, anti-skid, footing stable 5. Excel in smooth movement stability and stay control

Read more less

1. Material: stainless steel2. Application: cycling training platform, mountain bike, bicycle3. Weight: 100g4. Rod length: 165mm5. Because the head of the quick release lever is round, it is very suitable for the currently popular riding platforms on the market, and it is a firm quick release lever

Read more less

1. Material: PU2. Size: 31 x 21 x 9cm3. Power supply mode: button battery (included in the product)4. The taillights are waterproof5. Front narrow round transition design6. Safety warning taillights, more eye-catching when there are lights at night7. The bottom shock-absorbing ball design has strong shock absorption effect and is not easy to break8. Soft bomb design, cushioning and shock absorption, no pain during riding9. Super-fiber leather on the surface, soft and high-elastic, wear-resistant, dirty and scratch-resistant, full of 3D stereoscopic effect

Read more less

1. Material: aluminum alloy + ABS plastic + iron2. Size: 36x28x48 cm3. Weight: about 1.75 kg4. Application: mountain bike, road rim, rear tire rim5. Unique flat design, it is very convenient to store, does not take up space, and it only takes one step to open and fold the stand6. The measurement part is made of plastic material, which is not easy to scratch the rim7. Applicable for front hub opening 100MM, rear hub opening 135MM8. Rotating fixed seat can fix front wheel or rear wheel

Read more less

1. Durable and practical to use. 2. Which can flexibly respond to brake handles of any structure. 3. Bottle can connected to lever or caliper, can also be used to collect waste oil. 4. Easy to use design. 5. Oil-resistant plastics can withstand long-term erosion from brake oil and shock oil without discoloration or cracking.

Read more less

1. Made of high-quality stainless steel, it is durable and not easy to rust. 2. There are 4 different wrenches to suit different needs, you can choose the one you need. 3. Designed to be lightweight and compact for easy storage while offering enough leverage to get the job done while in the field. 4. Double head design. 5. Not only suitable for experienced mechanics, but also suitable for manufacturing or correcting wheels, or assembling new bicycles.

Read more less

1. A box of slub cable sets can be used for both variable speed cable sets and brake cable sets. 2. Two boxes of slubby line tube sets are required for variable speed and brake line set installation together. 3. Material: Aluminum alloy 4. rocess: CNC, anode coating 5. Single joint: Diameter 5mm, Length 9.5mm 6. Line pine length: 1m

Read more less

1. High-strength stainless steel, high-precision laser cutting, matte surface treatment, closed loop design and not unload. 2. Stainless steel removal tool, it is not easy to scratch the bottom bracket. 3. The stainless steel wrench, repeated disassembly and assembly tests, the hardness of the wrench is stable. 4. Plastic smooth handle, comfortable to grip, beautiful and durable. 5. Suitable for installation and removal of bicycle brackets. 6. Compatibility: -BB49-12 is suitable for use on bottom brackets with an outer diameter of 49mm and 12 tooth slots. If applicable to some BSA30 bottom brackets Note: For bottom brackets that are not included in the above, please purchase according to the outer diameter and the number of cogging grooves of the bottom bracket data

Read more less

1. Material: copper fiber, steel back plate2. Purpose: bicycle disc brake3. Application: most bicycles can be used4. Applicable scenarios: suitable for common commuting, cycling training, light cross-country, etc.5. Features: easy and simple installation, wear-resistant and durable, meticulous workmanship, wide applicability6. Packing list: brake pads x2, bolt x1, spring plate x1 (DB-S4/DB-S5/DB-S10 does not contain bolts, DB-S8/DB-S9 does not contain spring plates, DB-S44/DB-S14 Bolt and spring are not included)7. Weight: about 30g/pair

Read more less

1. Material: copper fiber, steel back plate2. Purpose: bicycle disc brake3. Application: most bicycles can be used4. Applicable scenarios: suitable for common commuting, cycling training, light cross-country, etc.5. Features: easy and simple installation, wear-resistant and durable, meticulous workmanship, wide applicability6. Packing list: brake pads x2, bolt x1, spring plate x1 (DB-S4/DB-S5/DB-S10 does not contain bolts, DB-S8/DB-S9 does not contain spring plates, DB-S44/DB-S14 Bolt and spring are not included)7. Weight: about 30g/pair

Read more less

1. Material: alloy steel2. Application: mountain/road bike, etc.3. Features: the chain has a total length of 116 links, which can be cut according to the required length. It is recommended to choose a steel chain cutter, which is simple and quick, electroplated silver, rust-proof, and has a bright surface4. Number of knots: 116 knots5. Specifications: 6/7/8 speed 1/2x3/32 inch, 9/10/11 speed 1/2x11/128 inch6. Weight: 6/7/8 speed is about 333 grams, 9/10 speed is about 310 grams, 11 speed is about 275 grams

Read more less

1. Material: steel2. Application: mountain/road bike, etc.3. Purpose: repair common full-concealed, press-in semi-concealed and external bearing bowl sets4. Features: laser engraved bearing parameters, inner and outer 45 degree chamfer, anti-rust and abrasion resistance, flexible rotation, wide applicability5. Specification: 41/41.8/47/49/52mm6. Weight: about 25g for 41mm, about 26g for 41.8mm, about 33g for 47/49mm, and about 35g for 52mm

Read more less

1. The gripping performance transmits the force of the rider to the pedals, minimizing the physical energy loss of the human body2. Lubricate the three bearing structures so that the pedals can run easily and freely3. Features: climbing force, light weight, good lubricity, fashion4. Material: aluminum alloy5. Applicable models: bicycles, mountain bikes, road bikes6. Weight: PD-M86 is about 282g, PD-R87 is about 231g7. Dimensions: PD-M86: 94x114mm, PD-R87: 94x98mm

Read more less

1. The gripping performance transmits the force of the rider to the pedals, minimizing the physical energy loss of the human body2. Lubricate the three bearing structures to make the pedals run easily and freely3. Features: climbing force, light weight, good lubricity, fashion4. Material: aluminum alloy5. Applicable models: bicycles, mountain bikes, road bikes6. Weight: PD-M86C is about 260g, PD-R87C is about 245g7. Dimensions: PD-M86C: about 94x114mm, PD-R87C: about 94x98mm

Read more less

1. Chrome-molybdenum steel shaft core + aluminum alloy frame, one-piece aluminum alloy cleats, hard strength2. Double-sided cleats, anti-slip tread3. Overall metal material, strong and durable, not easy to break4. 3 bearing design, high lubrication, and labor-saving rotation5. Quick release connector6. Material: aluminum alloy7. Applicable models: road bikes, bicycles8. PD-R67: 3 bushings, 3 bushings, high strength and light weight9. PD-R67Q: quick-release 3 bearing type, 3 bearing, the shaft core mounting screw is modified to a quick-release interface, which can quickly assemble and disassemble the pedal10. PD-R27: practical model, DU bearing, durable, not easy to wear, suitable for daily recreational vehicles11. Dimensions: PD-R67: 10x9.1x1.8cm, PD-R67Q: 11.5x9.1x1.8cm, PD-R27: 10.5x9.1x1.8cm12. Weight: PD-R67: 259g (1 pair), PD-R67Q: 344g (1 pair), PD-R27: 271g (1 pair)

Read more less

1. The flat surface is widened, and the cushion is comfortable2. Widened and enlarged, shock-absorbing ball design3. High resilience sponge, more soft and comfortable to sit on4. The outer layer is made of waterproof material, not wet, and it can be wiped clean with paper after getting wet5. High-strength sitting bow, easy to install and durable6. The cushion adopts hollow and breathable design, so it is not stuffy to sit for a long time.7. Features: high elastic shock absorber, convenient installation, breathable and not stuffy, softer, scratch-resistant and wear-resistant8. Material: leather / polyurethane foam9. Size: 28x33x3.5cm10. Weight: 615g

Read more less

1. The flat surface is widened, and the cushion is comfortable2. Widened and enlarged, shock-absorbing ball design3. High resilience sponge, more soft and comfortable to sit on4. The outer layer is made of waterproof material, not wet, and it can be wiped clean with paper after getting wet5. High-strength sitting bow, easy to install and durable6. The cushion adopts hollow and breathable design, so it is not stuffy to sit for a long time.7. Taillights can be installed at the rear of the seat cushion for safe travel at night8. Tail lamp battery capacity: 400 mA9. Use time: highlight 4 hours, low light 10 hours10. Material: leather / polyurethane foam11. Features: high elastic shock absorber, convenient installation, breathable and not stuffy, softer, scratch-resistant and wear-resistant12. Size: 33x28x3.5cm13. Weight: 615g

Read more less

1. High-strength shock absorption, comfortable riding2. Alloy spring steel, safe to use3. Easy sliding, two-way adjustment4. Can carry tail bag, widely used5. Bearing weight: within 100kg6. Application: mountain bikes, road bikes, bicycles, etc.7. Features: high elastic shock absorption, free adjustment, one-piece molding, alloy material8. Material: alloy spring steel + 6061 aluminum + silica gel9. Size: 16.5x8.5cm

Read more less

1. Material: aluminum alloy2. Application: suitable for 22.2mm handlebars3. Tubing length: front tubing 80 cm, rear tubing 140 cm4. Installation dimensions: standard A-pillar: 7.5 mm, standard B-pillar: 5.1 mm5. Brake disc thickness: 1.8 mm6. Weight: front brake: 327g, rear brake: 311g7. Double-piston drive management, synchronous friction, stable braking, strong braking force8. Three-finger brake lever, easy to operate, strong braking force9. Made of aluminum alloy material, strong and durable, reset in time

Read more less

1. Essential tools for repairing bicycles2. High-quality stainless steel, durable and anti-rust3. Easy to use, save time and effort4. Exquisite workmanship, high and low temperature resistance, light and portable5. Surface technology: anodic oxidation6. Application: mountain bikes, bicycles, road bikes, folding bikes7. Material: stainless steel8. Front quick release lever: 145mm9. Rear quick release lever: 175mm10. Weight: about 94g (1 pair)

Read more less

1. These valve cores are made of high-quality copper, which enhances the corrosion resistance of the valve core and valve stem, especially when the valve core is installed in the brass valve stem, it is more durable, safe and reliable.2. Use pliers or a valve removal tool to screw into the valve rod, no longer need to worry about the bicycle tire problem, the installation is simple and convenient.3. The all-copper valve core reduces the air leakage rate and improves the performance of the valve core.4. Function: Used for tire air intake to prevent tire air leakage5. Scope of application: French valve suitable for various bicycles such as road bikes, folding bikes, mountain bikes, etc.6. Material: Brass7. Surface treatment: nickel plating

Read more less

1. The bottom of the pedal is equipped with a dust cover, which is sealed and designed to prevent rain and dust.2. Made of steel, high strength, 14mm universal thread, suitable for most bicycles3. There are 8 stainless steel anti-skid studs on both sides of the pedal to increase the gripping force and prevent slipping4. Enlarged and widened tread design, easy to pedal5. Material: nylon + steel shaft6. Weight: about 352g/pair7. Size: about 11.5x11.2x1.25cm

Read more less

1. The bottom of the pedal is equipped with a dust cover, which is sealed and designed to prevent rain and dust.2. Made of steel, high strength, 14mm universal thread, suitable for most bicycles3. There are 8 stainless steel anti-skid studs on both sides of the pedal to increase the gripping force and prevent slipping4. Enlarged and widened tread design, easy to pedal5. Material: nylon + steel shaft6. Weight: about 352g/pair7. Size: about 11.5x11.2x1.25cm

Read more less

1. With the rotating rod as the axis, it can be rotated 360 degrees, measure the distance between the rim and the tail hook, and correct the tail hook2. Lock the swivel rod, precision thread, turn the handle clockwise, screw the swivel rod into the tail hook, precision lock3. Lock and press the sliding bracket to adjust the distance between the measuring rod and the wheel hub, and measure the deviation between the tail hook and the wheel rim4. Move the measuring rod to contact the rim, and then move the O-ring to align with the sliding bracket to locate5. Material: aluminum alloy6. Use: used for the calibration and correction of the tail hook on the bicycle7. Weight: about 720 grams8. Size: about 43x10.8cm

Read more less

1. Suitable for all kinds of mountain bikes and road bikes with seatpost diameter less than 34mm2. It can block mud and rain, easy to install3. Material: Plastic4. Weight: fender 280g5. Front fenders size: front width 7cm, rear width 4.5cm, length 29cm6. Rear fenders size: front width 6.5cm, rear width 4cm, length 54cm

Read more less

1. Material: EVA+PU 2. Antiskid and wear-resistant, comfortable and breathable 3. Adhesive fixed, stable and firm 4. Size: 215x3x0.263cm 5. Weight: 76g/pair 6. Packing list: - Bicycle grip tape x 2 - Stopper x 2 - Sealing tape x 2

Read more less

1. Material: EVA+PU 2. Antiskid and wear-resistant, comfortable and breathable 3. Adhesive fixed, stable and firm 4. Size: 215x3x0.263cm 5. Weight: 76g/pair 6. Packing list: - Bicycle grip tape x 2 - Stopper x 2 - Sealing tape x 2

Read more less

1. Material: aluminum alloy + titanium alloy shaft 2. Three-bearing shaft, labor-saving and stable 3. Light weight, strong grip, durable, flexible rotation 4. Applicable: mountain bike, road bike, recreational bike 5. Net weight: about 251g

Read more less

1. Material: sponge + ABS + aluminum alloy lock ring 2. High-density sponge cover, non-slip and sweat-absorbing, soft and shock-absorbing 3. Aluminum alloy lock ring, firmly fixed to prevent falling off 4. Single size: 126x34mm, inner diameter: 22.2mm 5. Weight: 90g/pair

Read more less

1. Material: EVA+PU 2. Antiskid and wear-resistant, comfortable and breathable 3. Adhesive fixed, stable and firm 4. Size: 215x3x0.263cm 5. Weight: 76g/pair 6. Packing list: - Bicycle grip tape x 2 - Stopper x 2 - Sealing tape x 2

Read more less

1. Material: aluminum alloy + chrome molybdenum steel shaft 2. DU bearing, it is affordable and suitable for recreational bikes 3. Strong grip, flexible rotation, durable, non-slip 4. 10.5x10.3cm wide pedal area 5. Net weight: about 352g

Read more less

1. Material: aluminum alloy + chrome molybdenum steel shaft 2. Three-bearing shaft, labor-saving and stable 3. The surface adopts anodizing process, matte texture, wear-resistant and scratch-resistant 4. Sealed bearing, to block the penetration of rainwater 5. Net weight: about 276g

Read more less

1. The tube body is equipped with a safety line, with clear identification and easy installation.2. About 3mm thick pipe wall, not easy to break3. Aluminum alloy material, sturdy and durable4. Material: 6061 aluminum alloy5. Adaptation: generally suitable for folding bikes, mountain bikes6. Specifications: about 31.8x530mm, 33.9x550mm

Read more less

1. With safety identification line, easy to install2. Thickened pipe wall, not easy to break3. Matte surface, anodized, durable4. The angle of the seat cushion can be fine-tuned5. Material: 6061 aluminum alloy6. Diameter: about 25.4/27.2/28.6/30.4/30.8/31.6mm7. Length: about 35/45cm

Read more less

1. Steering is sensitive and easy to control2. Aluminum alloy material, sturdy and durable3. Arc design, unique and beautiful appearance4. Material: aluminum alloy5. Scope of application: suitable for handlebars with a diameter of about 31.8mm6. Weight: about 128 grams7. Size: about 31.8x45cm

Read more less

1. Made of aluminum alloy, strong and durable, high strength and light weight2. Easy installation and flexible operation3. Applicable: one-piece riser with tooth front fork modified with split riser4. Material: aluminum alloy5. Size: 22.2/25.4mm6. Size: the diameter of the upper section is about 28.6mm, the diameter of the lower section is about 22.2/25.4mm, and the length is about 16 cm7. Weight: about 155 grams for 22.2mm, about 180 grams for 25.4mm

Read more less

1. Aluminum alloy material, hardened by heat treatment2. Sawtooth design, the angle can be adjusted freely with the sawtooth on the seat tube3. Process: CNC integrated molding4. Applicable: mounted on double rail seatpost5. Material: aluminum alloy6. Size: about 5.4cm7. Weight: about 77.5g/piece

Read more less

1. Material: nylon fiber composite material2. Using nylon composite material, feel comfortable when stepping, waterproof and dustproof3. Full carbon steel bearing, more stable and long service life4. More fit to the sole, providing a more comfortable riding experience and making riding safer5.L stands for left pedal, R stands for right pedal, 9/16 inch Cr-Mo steel spindle, suitable for most mountain bikes, road bikes, etc.6. Anti-skid design, increase friction, prevent feet from slipping, and ensure the safety of cyclists7. Dimensions: 11.5 x 13.6 x 1.25 cm8. Weight: 356g/pair

Read more less

1. Easy to install, not easy to rust2. CNC precision machining, high hardness, wear-resistant and durable3. Smooth speed change, one-piece molding4. Using high-strength aluminum alloy to reduce weight, improve strength and rigidity, strong force, not easy to break5. Vacuum plating, anti-oxidation, vacuum plating forms a special protective film to prevent surface oxidation6. Material: aluminum alloy7. Weight: 8-speed 42T: 377g, 9-speed 42T: 415g, 10-speed 42T: 440g, 10-speed 50T: 538g, 11-speed 40T: 443g, 11-speed 50T: 578g, 12-speed 50T: 599g

Read more less

1. Easy to install, not easy to rust2. CNC precision machining, high hardness, wear-resistant and durable3. Smooth speed change, one-piece molding4. Using high-strength aluminum alloy to reduce weight, improve strength and rigidity, strong force, not easy to break5. Vacuum plating, anti-oxidation, vacuum plating forms a special protective film to prevent surface oxidation6. Material: aluminum alloy7. Weight: 8-speed 42T: 377g, 9-speed 42T: 415g, 10-speed 42T: 440g, 10-speed 50T: 538g, 11-speed 40T: 443g, 11-speed 50T: 578g, 12-speed 50T: 599g

Read more less

1. Material: aluminum alloy + tool steel2. Hexagon: 2/2.5/3/4/5/6/8mm3. Cross PH2, one word, plum T25, chain remover, chain magic buckle removal4. Spoke wrench 3.3/3.5 mm, open-end wrench 6/8/10/15 mm, tire pry bar5. French valve core disassembly 4.1mm, French mouth extension bar disassembly 5mm, chain hook6. High hardness and good durability7. Strong and durable, not easy to deformation8. Size: 79x42x25mm9. Weight: 169g

Read more less

1. Material: aluminum alloy2. Applicable: 16-21mm inner diameter handlebar3. Screw specification: M4x34 mm4. Dimensions: diameter 23.5 cm, lower end 15.8 cm5. Weight: 21g/pairSet contains:- Expansion Tube x 1- Aluminum alloy cover x 1- Hexagon socket x 1

Read more less