Phone Car Kits

1. Material: ABS environmental protection plastic, stainless steel2. Applicable mobile phone size: 4.5-7 inches3. Applicable handlebar diameter: U-shaped handlebar style: 16-33mm, round handlebar style: 20-30mm, rearview mirror style adaptable aperture: 8-10mm4. All-inclusive shock-absorbing soft rubber, does not scratch the phone5. Reserved interface and button position, more convenient to use6. Can be rotated 360 degrees, both horizontal and vertical screens can be used

Read more less

1. Material: ABS+PC2. Support mobile phone size: 4.7-7.2 inch mobile phone3. Scope of application: motorcycles, electric vehicles, bicycles with a handlebar diameter of 15-34mm4. It can be rotated 360 degrees and the tilt angle can be adjusted5. The back plate and the bottom support are covered with silica gel, which is shock-absorbing and non-slip, and does not scratch the phone6. Widely compatible with various models7. Surrounded and fixed at four points, stable, and the phone is not easy to fall8. One-handed operation, quick access9. Product size: 10.597 x 8.965 x 18.573mm10. Product weight: 150 grams

Read more less

1. Material: ABS, aluminum alloy2. Applicable mobile phone: 4.7-6.8 inches3. Application: motorcycles, bicycles, electric vehicles, etc.4. Weight: about 200g/piece5. Size: about 10x6.5 cm/pieceFeatures:1. One key lock2. Strong spring, tighter clamping force3. Stable structure, thick base, anti-vibration and anti-skid4. Non-blocking button design does not affect normal use and daily charging5. Can rotate 360 degrees at will6. The two claws are extended by 4mm, suitable for more mobile phones

Read more less

1. Material: ABS, aluminum alloy2. Applicable mobile phone: 4.7-6.8 inches3. Application: motorcycles, bicycles, electric vehicles, etc.4. Weight: about 200g/piece5. Size: about 10x6.5 cm/pieceFeatures:1. One key lock2. Strong spring, tighter clamping force3. Stable structure, thick base, anti-vibration and anti-skid4. Non-blocking button design does not affect normal use and daily charging5. Can rotate 360 degrees at will6. The two claws are extended by 4mm, suitable for more mobile phones

Read more less

1. Stable anti-shake, 360 degree rotation2. The film is anti-slip and shock-proof, stable shooting, no falling, no shaking3. Simple installation, convenient and practical4. Standard 1/4 inch, suitable for most cameras on the market5. Material: aluminum alloy + ABS6. Applicable models: for GoPro, for DJI, for INSTA360, micro single, card camera, driving recorder, etc.7. Note: The product only contains the bracket, no other8. Size: 7x6.5x11.5cm9. Weight: about 290g

Read more less

1. Stable anti-shake, 360 degree rotation2. The film is anti-slip and shock-proof, stable shooting, no falling, no shaking3. Simple installation, convenient and practical4. Standard 1/4 inch, suitable for most cameras on the market5. Material: aluminum alloy + ABS6. Applicable models: for GoPro, for DJI, for INSTA360, micro single, card camera, driving recorder, etc.7. Note: The product only contains the bracket, no other8. Size: 7x6.5x11.5cm9. Weight: about 290g

Read more less

1. Material: aluminum alloy2. Applicable mobile phone size: 60-100mm width mobile phone3. Symmetrical left and right wings, wide and firm, good protection performance4. Adopt 90-degree inner buckle design to prevent the phone from falling off from the bottom5. Made of all-aluminum alloy material, sturdy and durable6. Weight: H5: 167.9 grams, H6: 181.5 grams

Read more less

1. Material: aluminum alloy2. Applicable mobile phone size: 60-100mm width mobile phone3. Symmetrical left and right wings, wide and firm, good protection performance4. Adopt 90-degree inner buckle design to prevent the phone from falling off from the bottom5. Made of all-aluminum alloy material, sturdy and durable6. Weight: H5: 167.9 grams, H6: 181.5 grams

Read more less

1. Easy installation and effortless operation 2. Compatible with all 4.7-7 inch mobile phones 3. Four corners fixed design, sturdy and sturdy 4. Manual lock lever, double safety, not afraid of falling 5. Suitable for handlebars with a diameter of 15-31mm 6. It can be rotated 360 degrees, and the angle can be adjusted as needed 7. One-key operation, easy to use 8. Suitable for all kinds of motorcycles 9. Material: ABS+PC

Read more less

Features:1. Support wireless charging 15W, charging port USB supports QC3.0 fast charging, fully supports wired charging, wireless charging can be used, can charge mobile phones faster2. The telescopic range of the mobile phone bracket is 6-9cm, and it can be used by 3.5-6.5 inch mobile phones. It has a wide range of use and can be applied to most mobile phones.3. Equipped with a 1.5-meter thick cable, which is more sturdy and firm. The bracket and the battery cable have their own fuse to prevent the voltage from being too large, which can effectively protect the mobile phone and the bracket4. Adopt tightness design, with independent switch to increase waterproof cover, USB port to increase the closed design, can also ride in rainy days5. It adopts rotating ball design, which can be rotated 360 degrees in the horizontal direction, and can be placed at any angle, and the operation is simple and fast6. The bracket adopts thickened silicone, soft rubber gasket to protect the phone from bumps, and strengthen the buffer to protect the phone, so you can use it with confidence7. Mechanical locking design, even if the riding section is not afraid of speed bumps, sudden braking, bumps8. Built-in intelligent identification chip, fast automatic induction wireless charging, automatic identification of iOS/Android mobile phone charging power, high resolution, strong applicabilityparameter:1. Power output: USB: 5V/3A, 9V/1.8A, 12V/1.5A; wireless charging: 15W, support all 10W/7.5W/5W models on the market2. Fast charging protocol: BC1.2 charging protocol/Apple 2.4A/Samsung 2.0A/Qualcomm QC2.0/3.0/Huawei FCP/Samsung AFC/Huawei SCP super fast charge3. The lens holder is suitable for aperture: 1cm in diameter4. Input voltage: DC 12-24V5. Line length: 150cm6. Waterproof grade: IP667. Scope of use: suitable for 12-24V vehicles such as motorcycles, scooters, ATVs, tricycles, etc.

Read more less

1. Simple installation, convenient and fast2. Stable riding, multi-purpose3. The size of the ball head is 25mm, the material of the ball head is plastic, and the base is aluminum alloy4. Process CNC integration, anodizing and coloring5. Appropriate thin tube size: 22-32MM (the diameter is 32mm when the pad is not installed at the bayonet position)6. Use: used to fix 1 inch ball head mobile phone bracket as well as camera, navigator, etc.7. Material: 6061 aluminum alloy8. Installation location: motorcycle handlebars and other locations9. Weight: 56g

Read more less

1. Simple installation, convenient and fast2. Stable riding, multi-purpose3. The ball head is made of plastic, and the base is made of aluminum alloy.4. Process CNC integration, anodizing and coloring5. Suitable for motorcycles, bicycles, etc.6. Use: used to fix mobile phone brackets, cameras, navigators, etc.7. Material: aluminum alloy8. Weight: about 82g

Read more less

1. Simple installation, convenient and fast2. Stable riding, multi-purpose3. The ball head is made of plastic, and the base is made of aluminum alloy.4. Process CNC integration, anodizing and coloring5. Suitable for motorcycles, bicycles, etc.6. Use: used to fix mobile phone brackets, cameras, navigators, etc.7. Material: aluminum alloy8. Weight: about 82g

Read more less

1. It adopts mechanical locking and anti-vibration design, which can be firmly fixed on the car and not easy to fall off. Even on bumpy mountain roads, there is no need to worry about riding problems. 2. The four corners of the bracket are designed with TPE soft silicone foot cover barbs, which are shock-absorbing, non-slip, and do not scratch the phone, and can be used with bare metal. 3. The overall design is made of aluminum alloy, which is high-strength, impact-resistant, and more durable. 4. The X-shaped design is adopted, and the operation is convenient, simple and quick. 5. The ball head adopts a 360-degree universal ball rotation design, and the bracket arm adopts an extended design, which can adjust the angle you need at will to meet different needs. 6. The back of the bracket is made of non-slip silicone, and the non-slip silicone fixing net is distributed, which can better protect the mobile phone, so as to effectively play the role of non-slip and shock absorption, and relieve the impact of riding bumps. 7. Handlebar diameter: about 1.4-3.2cm 8. Applicable mobile phone size: 3.5 - 7 inches (width: 3.6-11cm, thickness: 1.5cm) 9. Uses: Suitable for the installation and use of motorcycles, bicycles, electric vehicles, ATVs, motorcycle tricycles and other models, with a wide range of installations

Read more less

1. Support wireless charging 15W, charging port USB supports QC3.0 fast charging, fully support wired charging, wireless charging can be used, can charge mobile phones faster 2. The telescopic range of the mobile phone bracket is 6-9cm, and it can be used by 3.5-6.5 inch mobile phones. It has a wide range of use and can be applied to most mobile phones. 3. With a 1.5-meter thick connecting wire, it is more sturdy and firm. The bracket and the battery connecting line have their own fuse, which can effectively protect the mobile phone and the bracket when the voltage is too large. 4. Adopt tightness design, with independent switch to increase waterproof cover, USB port to increase the closed design, you can ride in rainy days 5. It adopts rotating ball design, which can be rotated 360?° in the horizontal direction, and can be placed at any angle, and the operation is simple and fast 6. The bracket adopts thickened silicone, soft rubber gasket to protect the phone from bumps, and strengthen the buffer to protect the phone, so you can use it with confidence 7. Mechanical locking design, even if the riding section is not afraid of speed bumps, sudden braking, bumps 8. Built-in intelligent identification chip, fast automatic induction wireless charging, automatic identification of Apple/Android mobile phone charging power, high resolution, strong applicability 9. Parameters: Waterproof grade: IP66 Input voltage: DC 12-24V Output power: USB: 5V/3A, 9V/1.8A, 12V/1.5A; wireless charging: 15W, supports all 10W/7.5W/5W models on the market Fast charging protocol: BC1.2 charging protocol/Apple 2.4A/Samsung 2.0A/Qualcomm QC2.0/3.0/Huawei FCP/Samsung AFC/Huawei SCP super fast charge Handlebar applicable diameter: 1.8-2.6cm in diameter (with spacer test) Scope of use: suitable for 12-24V vehicles such as motorcycles, scooters, ATVs, tricycles, etc.

Read more less

1. It adopts mechanical locking and anti-vibration design, which can be firmly fixed on the car and not easy to fall off. Even on bumpy mountain roads, there is no need to worry about riding problems. 2. The four corners of the bracket are designed with TPE soft silicone foot cover barbs, which are shock-absorbing, non-slip, and do not scratch the phone, and can be used with bare metal. 3. The overall design is made of aluminum alloy, which is high-strength, impact-resistant, and more durable. 4. The X-shaped design is adopted, and the operation is convenient, simple and quick. 5. The ball head adopts a 360-degree universal ball rotation design, and the bracket arm adopts an extended design, which can adjust the angle you need at will to meet different needs. 6. The back of the bracket is made of non-slip silicone, and the non-slip silicone fixing net is distributed, which can better protect the mobile phone, so as to effectively play the role of non-slip and shock absorption, and relieve the impact of riding bumps. 7. Applicable diameter of ball head: 8mm 8. Applicable mobile phone size: 3.5 - 7 inches (width: 3.6-11cm, thickness: 1.5cm) 9. Uses: Suitable for the installation and use of motorcycles, bicycles, electric vehicles, ATVs, motorcycle tricycles and other models, with a wide range of installations

Read more less

1. It adopts mechanical locking and anti-vibration design, which can be firmly fixed on the car and not easy to fall off. Even on bumpy mountain roads, there is no need to worry about riding problems. 2. The four corners of the bracket are designed with TPE soft silicone foot cover barbs, which are shock-absorbing, non-slip, and do not scratch the phone, and can be used with bare metal. 3. The overall design is made of aluminum alloy, which is high-strength, impact-resistant, and more durable. 4. The X-shaped design is adopted, and the operation is convenient, simple and quick. 5. The ball head adopts a 360-degree universal ball rotation design, and the bracket arm adopts an extended design, which can adjust the angle you need at will to meet different needs. 6. The back of the bracket is made of non-slip silicone, and the non-slip silicone fixing net is distributed, which can better protect the mobile phone, so as to effectively play the role of non-slip and shock absorption, and relieve the impact of riding bumps. 7. Aperture of lens holder: 1cm 8. Applicable mobile phone size: 3.5 - 7 inches (width: 3.6-11cm, thickness: 1.5cm) 9. Uses: Suitable for the installation and use of motorcycles, bicycles, electric vehicles, ATVs, motorcycle tricycles and other models, with a wide range of installations

Read more less

1. It adopts mechanical locking and anti-vibration design, which can be firmly fixed on the car and not easy to fall off. Even on bumpy mountain roads, there is no need to worry about riding problems. 2. The four corners of the bracket are designed with TPE soft silicone foot cover barbs, which are shock-absorbing, non-slip, and do not scratch the phone, and can be used with bare metal. 3. The overall design is made of aluminum alloy, which is high-strength, impact-resistant, and more durable. 4. The X-shaped design is adopted, and the operation is convenient, simple and quick. 5. The ball head adopts a 360-degree universal ball rotation design, and the bracket arm adopts an extended design, which can adjust the angle you need at will to meet different needs. 6. The back of the bracket is made of non-slip silicone, and the non-slip silicone fixing net is distributed, which can better protect the mobile phone, so as to effectively play the role of non-slip and shock absorption, and relieve the impact of riding bumps. 7. Applicable diameter of ball head: 10mm 8. Applicable mobile phone size: 3.5 - 7 inches (width: 3.6-11cm, thickness: 1.5cm) 9. Uses: Suitable for the installation and use of motorcycles, bicycles, electric vehicles, ATVs, motorcycle tricycles and other models, with a wide range of installations

Read more less

1. High waterproof performance2. Touchable screen protector3. Quick release base, convenient and convenient, quick installation, take away, one set can be installed/removed by pressing 45 degrees4. Dimensions: 187 x 102 x 19mm5. Installed size: 168 x 83 x 10.5mm

Read more less

1. Smart wireless charging, free your hands, you can charge your phone when you put it on, which is convenient and fast.2. Touch screen design, can operate normally without taking out the phone.3. Waterproof design, fully enclosed and closed, you can ride in rainy days.4. Reserve Type-C charging port, both wired and wireless can be charged.5. Independent switch control, the power can be turned off when not charging.6. Output: wireless charging 15W, PD output 20W7. Dimensions: 187 x 102 x 19mm8. Installed size: 168 x 83 x 10.5mm

Read more less

1. Smart wireless charging, free your hands, you can charge your phone when you put it on, which is convenient and fast. 2. Touch screen design, can operate normally without taking out the phone. 3. Waterproof design, fully enclosed and closed, you can ride in rainy days. 4. Reserve Type-C charging port, both wired and wireless can be charged. 5. Independent switch control, the power can be turned off when not charging. 6. Output: wireless charging 15W, PD output 20W 7. Dimensions: 170 x 102 x 19mm 8. Installed size: 152 x 76 x 10.5mm

Read more less

1. Smart wireless charging, free your hands, you can charge your phone when you put it on, which is convenient and fast.2. Touch screen design, can operate normally without taking out the phone.3. Waterproof design, fully enclosed and closed, you can ride in rainy days.4. Reserve Type-C charging port, both wired and wireless can be charged.5. Independent switch control, the power can be turned off when not charging.6. Output: wireless charging 15W, PD output 20W7. Dimensions: 187 x 102 x 19mm8. Installed size: 168 x 83 x 10.5mm

Read more less

1. High waterproof performance2. Touchable screen protector3. Quick release base, convenient and convenient, quick installation, take away, one set can be installed/removed by pressing 45 degrees4. Dimensions: 170 x 102 x 19mm5. Installed size: 152 x 76 x 10.5mm

Read more less

1. Smart wireless charging, free your hands, you can charge your phone when you put it on, which is convenient and fast. 2. Touch screen design, can operate normally without taking out the phone. 3. Waterproof design, fully enclosed and closed, you can ride in rainy days. 4. Reserve Type-C charging port, both wired and wireless can be charged. 5. Independent switch control, the power can be turned off when not charging. 6. Output: wireless charging 15W, PD output 20W 7. Dimensions: 170 x 102 x 19mm 8. Installed size: 152 x 76 x 10.5mm

Read more less

1. Material: high quality raw material2. Applicable: 4.7-6.67 inch mobile phone3. One-handed operation, easy to take and place4. Button type, touch the middle clamp arm to shrink, press to expand the clamp arm5. 360-degree rotation, free adjustment can be horizontal or vertical6. Tightly buckled and locked, it will not fall off firmly, the four corners are firmly wrapped, and it is not easy to fall when shaking and shaking7. Shock-absorbing four-corner soft rubber, no damage to the phone, shock-absorbing/scratch-free8. Universal for all types of mobile phones, flexible clamp arm width adjustment, wide application9. The motorcycle model is installed on the rearview mirror, and the bicycle model is installed on the handlebar10. Jaw size: 10x10 cm

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable for 50-100mm Device 5. Clip caliber: 30mm 6. Weight: 112g

Read more less

1. Material: nylon PA66 fiber reinforced material, alloy2. Applicable models: motorcycles, electric vehicles, bicycles3. Applicable mobile phone: 4.7-7.1 inches4. Range of chuck: 56-85 mm5. Two installation types, free to choose6. The button is not blocked, charging and riding can be performed at the same time7. Thicken protective silicone, strengthen the stability of the phone, reduce vibration and noise8. The clip forms a special angle9. Can rotate 360 ​​degrees

Read more less

1. Material: nylon PA66 fiber reinforced material, alloy2. Applicable models: motorcycles, electric vehicles, bicycles3. Applicable mobile phone: 4.7-7.1 inches4. Range of chuck: 56-85 mm5. Two installation types, free to choose6. The button is not blocked, charging and riding can be performed at the same time7. Thicken protective silicone, strengthen the stability of the phone, reduce vibration and noise8. The clip forms a special angle9. Can rotate 360 ​​degrees

Read more less

1. Material: nylon PA66 fiber reinforced material, alloy2. Applicable models: motorcycles, electric vehicles, bicycles3. Applicable mobile phone: 4.7-7.1 inches4. Range of chuck: 56-85 mm5. Two installation types, free to choose6. The button is not blocked, charging and riding can be performed at the same time7. Thicken protective silicone, strengthen the stability of the phone, reduce vibration and noise8. The clip forms a special angle9. Can rotate 360 ​​degrees

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable for 60-100mm Device 5. Weight: 148g

Read more less

Clamp Diameter:31.1 - 32.5mmWidth:55-95mmBrand Name:promendType:Bike CellPhone HolderComponents:Bike Handlebar Mount Cellphone HolderMaterial:AL6063 Aluminum AlloyCompatible for handlebar diameter:25-31.8mm universalWeight:Approx 115gAdvantages:360 degree rotate, eagle claw bionic design,thicken fixing screws1. Pure metal, durable;2. 360° free rotation;3. Pure mechanical stability bracket;4. Universal, wide range of use;5. cushioning patch design, protect the phone well.

Read more less

Clamp Diameter:31.1 - 32.5mmWidth:55-95mmBrand Name:promendType:Bike CellPhone HolderComponents:Bike Handlebar Mount Cellphone HolderMaterial:AL6063 Aluminum AlloyCompatible for handlebar diameter:25-31.8mm universalWeight:Approx 115gAdvantages:360 degree rotate, eagle claw bionic design,thicken fixing screws1. Pure metal, durable;2. 360° free rotation;3. Pure mechanical stability bracket;4. Universal, wide range of use;5. cushioning patch design, protect the phone well.

Read more less

1. Size: about 18.5 cm long/piece2. Weight: about 398 grams/set (2 pieces)3. Material: ABS, aluminum alloy4. Application: general purpose for electric vehicles and motorcycles5. Features: unique shape, beautiful and practical, one-piece pressing, strong and durable, not easy to deform, high hardness, heat-resistant and flame-retardant, wear-resistant and anti-fall, safe and reliable, simple and convenient installation, wide applicability

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable for 4-6 inch Device 5. Weight: 308g

Read more less

1. Material: aluminum alloy, rubber2. Weight: about 60 grams3. Suitable equipment: mobile phone holder, camera holder, etc.4. Applicable models: bicycles, motorcycles, rally cars, scooters, tricycles, electric vehicles, etc.5. Installation instructions: install on the cylindrical hole/rear tail plate, etc.6. Features: compatible with various connecting rods/brackets, safe and practical, shockproof and firm, easy to use, easy to install, by rotating the hexagon socket screw, the cone nut is forced to stretch the expansion kit to achieve the purpose of fixing

Read more less

1. Material: aluminum alloy, rubber2. Weight: about 20 grams3. Size: about 4.5x3.5x2.5 cm4. Suitable equipment: mobile phone holder, camera holder/recorder holder, etc.5. Applicable models: bicycles, motorcycles, rally cars, scooters, tricycles, electric vehicles, etc.5. Installation instructions: install on the cylindrical hole/rear tail plate, etc.6. Features: compatible with a variety of equipment for fixed use, safe and practical, shockproof and firm, easy to use, easy to install

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable size: length: 50mm(can be adjusted to 100mm), width: 50mm, Clip caliber: 31.8mm 5. Weight: 120g

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable size: length: 50mm(can be adjusted to 100mm), width: 50mm, Clip caliber: 31.8mm 5. Weight: 120g

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable size: length: 50mm(can be adjusted to 100mm), width: 50mm, Clip caliber: 31.8mm 5. Weight: 120g

Read more less

1. GPS/Mobile holder for motorcycles. 2. 360 degrees free rotation, simple operation, easy to use. 3. Universal type, tool-free installation, tool-free adjustment. 4. Four corners lock design, more solid, safe.

Read more less

1. GPS/Mobile holder for motorcycles. 2. 360 degrees free rotation, simple operation, easy to use. 3. Universal type, tool-free installation, tool-free adjustment. 4. Four corners lock design, more solid, safe.

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Suitable for 4-6 inch Device 5. Weight: 308g

Read more less

1. Easy to install. 2. Durable and reliable. 3. Made of aluminum alloy, which is anti-corrosion. 4. Size: 7 x 5 x 2.2cm 5. Weight: 70g

Read more less

1. Product material: PC + stainless steel 2. Semi-automatic tightening of mobile phones. 3. Suitable for mobile phone size: 4-7 inches 4. Caliber of fixing clip: 32mm 5. Easy to install.

Read more less

1. No drilling is required and it is easy to install. 2. It can protect aluminum teeth from being worn and durable. 3. Size: 15x9x6cm. 4. Net weight: 0.244kg. 5. Material: aluminum + glue. 6. Applicable models: universal.

Read more less

Clamp Diameter:31.1 - 32.5mmWidth:55-95mmBrand Name:promendType:Bike CellPhone HolderComponents:Bike Handlebar Mount Cellphone HolderMaterial:AL6063 Aluminum AlloyCompatible for handlebar diameter:25-31.8mm universalWeight:Approx 115gAdvantages:360 degree rotate, eagle claw bionic design,thicken fixing screws1. Pure metal, durable;2. 360° free rotation;3. Pure mechanical stability bracket;4. Universal, wide range of use;5. cushioning patch design, protect the phone well.

Read more less

Clamp Diameter:31.1 - 32.5mmWidth:55-95mmBrand Name:promendType:Bike CellPhone HolderComponents:Bike Handlebar Mount Cellphone HolderMaterial:AL6063 Aluminum AlloyCompatible for handlebar diameter:25-31.8mm universalWeight:Approx 115gAdvantages:360 degree rotate, eagle claw bionic design,thicken fixing screws1. Pure metal, durable;2. 360° free rotation;3. Pure mechanical stability bracket;4. Universal, wide range of use;5. cushioning patch design, protect the phone well.

Read more less