CN Warehouses

1. Replacement LCD screen display front bezel logo cover frame for MacBook Air 13.6 inch A2681 2022 EMC4074 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Power jack connector replacement part2. Replace your broken or unworkable part with a new one3. Each item has been checked and in good condition before shipping4. Completely fit and work.5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. US version backlight computer keyboard2. Replace your broken or unworkable part with a new one3. Each item has been checked and in good condition before shipping4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts5. Completely fit and work6. Please check whether this keyboard fits your laptop or not before bidding.

Read more less

1. Replace your broken or unworkable part with a new one2. Each item has been checked and in good condition before shipping3. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts4. Completely fit and work5. Please check whether this keyboard fits your laptop or not before bidding.

Read more less

1. Function: Convert DC power to PD power, high conversion efficiency and high power output. 2. Input: DC15-20.5V 3. Output: PD 5V/9V 1.5A, 20V 5A 4. Cable length: about 10cm 5. Nylon braided cable, wear-resistant and durable 6. Note: Input must be >= output

Read more less

1. Back cover with camera lens & fingerprint sensor replacement for LG G8s ThinQ 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Good quality and extremely durable PU material. 2. Compact, lightweight and extremely durable design. 3. Protect your digital camera from dust, finger prints, and scratches. 4. Internal soft design gives you a soft and comfortable touch. 5. Additional adjustable long strap clasps onto the sides, makes it convenient to carry.

Read more less

1. Suitable for Audio-Technica ATH-M40X / M50X / M60X / M70X and other headphone models2. Using pure copper wire core, the signal transmission performance is better and more stable3. The outer layer is made of anti-tangle nylon braided material, which is durable, and the inner layer is made of OFC wire, which greatly guarantees the sound quality4. 3 buttons support volume control, skip tracks and answer calls, etc. (only for Android phones)5. Inline microphone, excellent sound quality for online chatting, gaming and calling6. Product application: connect computer, headphone audio interface, car audio interface7. Cable length: 1.5 meters8. Weight: about 25g9. Note: The product only includes wires, not earphones

Read more less

1. Power jack connector replacement part 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. Wear-resistant anti-skid pattern, effectively improve tire grip and stability2. Anti-slip and wear-resistant material, high and low temperature resistance, safer to ride3. Compatible with Ninebot Segway F20/F25/F30/F40 Electric Scooter4. Material: rubber5. Specifications: 10 x 2.125 inches, card slot 42mm6. Weight: about 1028g

Read more less

1. Rubber material, strong and durable.2. The air nozzle adopts a curved design for easy air extraction.3. It needs to be used together with the tire.4. Shipped without inflation, need to inflate by yourself.5. Single outer diameter size: 21x21cm.6. Single inner diameter size: 14cm.7. Individual weight: about 105.4g.

Read more less

1. Battery back cover replacement part. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Gimbal shock plate for DJI Mavic 2 Pro/Zoom2. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department

Read more less

1. In-Display fingerprint scanning sensor flex cable replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Motorola Moto G13 / G23 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Power button flex cable replacement part. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Real machine mold opening, accurate matching2. Easy to install and easy to use3. Environmentally friendly materials, safe to use4. For DJI Mavic Mini Air 2 / 2S5. Repair parts for accidental damage and replacement6. Long service life and easy installation

Read more less

About the productBefore Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A04E SM-A042 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Back facing camera replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Replacement back cover glass for Apple Watch Series 6 / 7 / 8 44mm 45mm. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Compatible with most SSD protocols: This USB 3.2 enclosure supports PCI-E AHCI/NVME SSD protocol, making it compatible with most solid state drives on the market. It also uses the Jmicron JMB586A main control chip, with efficient and stable data transmission performance.2. High-speed data transfer: Support USB3.2 GEN2 x 2 protocol and 20Gbps transfer speed, this USB C 3.2 Gen2 SSD enclosure can achieve fast data transfer and backup, saving you time and effort.3. Type-C interface for quick connection: This usb c 3.2 gen2 ssd case uses Type-C female interface, which can quickly fit your MacBook Air/Pro's USB-C port for high-speed data transfer and backup.4. Specially designed for Apple MacBook Air/Pro 2013-2017 SSD to ensure perfect fit and best performance.Parameter:1. Product size: 134.8 x 39.8mm/ 5.31 x 1.57 inches2. Product interface: Type-C female socket3. PCB color: black PCB4. Product rate (optional): 20Gbps dual-wire/10Gbps single-wire5. Support protocol: PCI-E AHCI/NVME SSD6. Main control chip: Jmicron JMB586A7. System support: WIN8/WIN10/WIN11/MAC/LINUX8. Warm reminder: 20Gbps needs to use the matching C-C cable. If you use the A-C cable to reach 10Gbps, the motherboard or notebook must support 20Gbps to run at the speed of 20Gbps.The following models are supported:-for 2013 Macbook Pro A1493 A1502(MD864 MD865 MD293 MD294) SSD-for 2013 Macbook Pro Retina A1398 A1502(ME864 ME865 ME866 ME293 ME294) SSD 2013 Macbook Air A1465 A1466-for (MD711 MD712 MD760 MD761) SSD 2014 Macbook Air-for A1465 A1466(MD711 MD712 MD760 MD761) SSD-for 2014 Macbook Pro Retina A1502 A1398(MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD-for 2015 Macbook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and for Pro ME253 MD878 SSD 2016-for 2016 Macbook Air A1465 A1466-for 2017 MacBook Air A1465 A1466

Read more less

1. Charging port board SIM card holder socket replacement for Lenovo Tab M10 HD TB-X505. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. Replacement bluetooth catenation for Apple Watch Series 4. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your watch that you may cause during the changing of replacement parts.

Read more less

1. Replacement bluetooth catenation for Apple Watch Series 5 / SE. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your watch that you may cause during the changing of replacement parts.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. Material: Silicone2. Weight: 2g3. Purpose: The silicone safety buckle design is ergonomically designed, practical and convenient4. Made of silicone material, dust-proof and drop-proof5. Simple product, easy to install and replace

Read more less

1. Gimbal camera flex cable for DJI Mavic 3. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Compatible models: For DJI Mini 3 / Mini 3 Pro2. Replace damaged or unusable ones with new ones3. Easy-to-install replacement parts4. Every item has been inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department

Read more less

Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly with frame replacement part 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. This dummy phone model is designed for iPhone 15 2. Pretend Phone Toy: Substitute your real cell phone to children that want a phone so badly but is still too young to have one. Party surprises, phone collection, children toys or other entertaining purposes. 3. Display Use: Cell phone store / phone accessories store display use, it is perfect to try out phone cases or other accessories. 4. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but sim card slot could not be pulled out. 5. This product is designated merely for phone store display, photographing tools, phone case tryout, kid plaything, prank or other legal use only. It is realistic, but its similarity is also controlled at the degree of one should easily tell apart from a real phone.

Read more less

1. This dummy phone model is designed for iPhone 15 Pro Max 2. Pretend Phone Toy: Substitute your real cell phone to children that want a phone so badly but is still too young to have one. Party surprises, phone collection, children toys or other entertaining purposes. 3. Display Use: Cell phone store / phone accessories store display use, it is perfect to try out phone cases or other accessories. 4. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but sim card slot could not be pulled out. 5. This product is designated merely for phone store display, photographing tools, phone case tryout, kid plaything, prank or other legal use only. It is realistic, but its similarity is also controlled at the degree of one should easily tell apart from a real phone.

Read more less

1. This dummy phone model is designed for iPhone 15 Plus 2. Pretend Phone Toy: Substitute your real cell phone to children that want a phone so badly but is still too young to have one. Party surprises, phone collection, children toys or other entertaining purposes. 3. Display Use: Cell phone store / phone accessories store display use, it is perfect to try out phone cases or other accessories. 4. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but sim card slot could not be pulled out. 5. This product is designated merely for phone store display, photographing tools, phone case tryout, kid plaything, prank or other legal use only. It is realistic, but its similarity is also controlled at the degree of one should easily tell apart from a real phone.

Read more less

1. For iPhone 11 display model with black screen. 2. One to one simulation. 3. Firm and durable. 4. Each item has been checked and in good condition before shipping. 5. Gifts or surprises in party, also could serve for display purpose.

Read more less

1. SIM card tray + SIM card tray / Micro SD card tray for OnePlus Nord N10 5G. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Item name: camera sensor2. Compatible model: for Oculus Quest 23. Well tested and ready to use4. Parts for repair, can be mounted on your VR headset5. Material: plastic + metal

Read more less

1. Suitable for Oculus Quest 2 VR joystick controller2. Tested for good performance3. Replace broken, worn or damaged parts.4. It will make your controller work properly again.5. Material: plastic + metal

Read more less

1. Replacement mode dial iron pad for Canon EOS 6D Mark II. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. USB plug cover cap replacement part.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement mode dial iron pad for Canon EOS 80D. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Suitable for PS5 handle button conductive film2. Replace damaged or unusable accessories with new ones3. Every item has been inspected and in good condition before shipment4. Professional installation is strongly recommended! We are not responsible for any damage to your device that you may incur during the replacement parts replacement process!5. Perfectly fit for gaming consoles, able to work properly

Read more less

1. Suitable for XBOX Series X, it is the LB RB baffle set on the handle2. The set is matched with the related T6 T8 crowbar disassembly tool, which is more practical.3. It is used to repair the damage of the LB RB button and the damage of the charging port baffle.4. Every item has been inspected and in good condition before shipment5. Professional installation is strongly recommended! We are not responsible for any damage to your device that you may incur during the replacement parts replacement process!

Read more less

1. 30Pin K1N-3040108-H39 K1N-3040108-J36 K1N-3040327-J36 LCD cable replacement for MSI MS16R1 GF63 8RD. 2. Replace your broken or unusable item with a new one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1) Base type: MR16 2) Input voltage: 12V 3) Total power: 5W 4) Lifetime: 50,000hours 5) Color changing: 16 colors 6) Remote control can turn on/off and adjust the colors and brightness 7) IR Remote control 8) Luminous flux: 400-450lm 9) Size: 65 x 50 x 50mm 10) Weight: 56g

Read more less

1. Weight: 400g2. Specifications: size 123×80×120 mm, capacity 300 ml3. Material: stainless steel, high borosilicate glass4. Withstand temperature: -20 degrees celsius -150 degrees celsius5. Applicable occasions: living room, study, office, etc.6. Features: beautiful and practical, resistant to high temperature and low temperature, not easy to break, environmentally friendly and safe material, non-toxic, health and hygiene, small pore filter, separate liner for easy cleaning, smooth and transparent texture, comfortable grip, durable

Read more less