CN Warehouses

1. Fully enclosed design, anti-scratch and anti-scratch safety upgrade2. Prevent oxidation short circuit, prevent the battery from being exposed to moisture and oxidation for a long time3. Dustproof and waterproof, prevent foreign objects, prevent conductive particles from entering the battery and cause short circuit4. Soft silicone, will not scratch the contacts, closely fit with the interface5. Intimate finger design, easy to install and remove6. It can be used as a battery base, so that the battery can stand upright on the desktop7. Tear-resistant and not deformed, durable8. Applicable models: suitable for Mini 3 Pro9. Material: Silicone10. Specifications: 3 packs11. Dimensions: 46 x 28 x 16mm12. Weight: about 9g/pcs13. Note: The product contains only the protective cover, nothing else

Read more less

Features1. 40 meters waterproof depth, anti-pressure protection is not penetrated. 2. Adopt symmetrical locks buckle design, and the structural performance is very reliable. The shell is thicker and more sturdy and not easily deformed. Not only can it be used for diving, but it can also protect your camera and lens in an all-round way, preventing your camera from being scratched and scratched. 3. Light-transparent material, no need to worry about light during shooting. 4. The optical imaging tempered glass is used, and the transmittance of the lens material is close to 92%. The AR extra-projection film is coated to make the lens transmittance reach more than 98%, and the waterproof film is coated with a drip angle of 115 degrees to ensure that no water droplets remain. The surface of the lens affects the shooting effect.Specifications1. Shell material: High permeability and corrosion-resistant PC/Germany Bayer 2805 2. Button material: Stainless steel 3. Waterproof ring material: Amorphous highly active silica gel 4. Material of the connecting shaft between the main body and the back cover: 304 stainless steel with high hardness 5. Product size: length 17.8 x width 8 x height 6.6cm 6. Product weight: 165gPackage List1. Waterproof case x 1 2. Invisible base x 1 3. Screw x 1 4. Anti-fog sheet x 1

Read more less

1. Multi-layer coating filter, high transmittance and high light to restore the true color2. Using professional optical glass lens, the image is clearer3. Protect your expensive lens from dust and scratches without degrading photo quality.4. Using this filter, you can get more freedom to control aperture and shutter, bring more exposure methods and creative space for photography creation, and effectively prevent overexposure. The number behind ND represents the ability of the ND mirror to block light.5. Material: Aviation aluminum alloy + optical glass6. Size: 32x7mm7. Weight: 6.3g

Read more less

1. The all-round handle is comfortable to hold. It integrates Wi-Fi, Bluetooth, wireless microphone receiver, and 1/4 screw port. It can be directly connected to the mobile phone APP to control shooting wirelessly.2. Support wireless microphone transmitter to record sound wirelessly3. You can also connect external headphones or microphones through the 3.5mm audio interface4. When watching a video, the built-in speaker can play the recorded live sound5. The 1/4 threaded port on the bottom can be connected to accessories such as tripods, which can be placed more stably on a horizontal surface6. When disassembling, please pull down the unlock switch first, and then pull out the handle vertically along the direction of the fuselage7. Highlights: wireless connection, improved grip, all-in-one design8. Wi-Fi: 2.400-2.4835 GHz, 5.725-5.850 GHz9. Bluetooth/GFSK: 2.400-2.4835 GHz10. Wi-Fi transmit power (EIRP) 2.4 GHz: ＜23 dBm (FCC), ＜19 dBm (CE/SRRC/MIC)11. Wi-Fi transmit power (EIRP) 5.8 GHz: ＜23 dBm (FCC/SRRC), ＜14 dBm (CE)12. Bluetooth: 4dBm13. GFSK: 13dBm (FCC/SRRC), 10dBm (CE/MIC)14. Dimensions: 50x28.6x22.8mm15. Weight: 36.3 grams

Read more less

1. Specially designed for DJI Mini 3 Pro, precise mold opening, small size and large capacity, can accommodate remote control with screen + charger + 2 batteries + aircraft + other small accessories (accessories not included) 2. High-quality PU leather fabric, beautiful appearance and upgraded taste 3. Two-way zipper, smooth and not stuck 4. The unique handle is easy to carry and can also be directly stored in the backpack 5. Using nylon fabric webbing, easy to adjust the length, light and wear-resistant 6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance 7. Dimensions: 30 x 23.5 x 8.2cm 8. Weight:556.5g

Read more less

1. Compatible models: suitable for Insta360 X3 / ONE X22. It does not take up much space and only weighs 7g, making the microphone and camera fit closely.3. All aluminum alloy material, strong and durable.4. Combined with the charging audio adapter, it can realize the sound collection effect of the microphone in the panoramic mode.5. Note: This product does not include the selfie stick and microphone.

Read more less

1. CNC technology, all-metal aluminum alloy material: the overall parts are made of aluminum alloy material, with high strength, high hardness and firm structure, not easy to loose, durable and more secure2. Shooting while riding, free control: When taking pictures outdoors, you can fix the remote control through the bicycle bracket and control the remote control while riding3. Reverse lock adjustment piece, human body gesture wrench, silicone non-slip pad4. Universal adjustment of the pea clip: the multi-angle of the pea clip is flexible and changeable, and can be adjusted according to your needs5. Compatible with horizontal/slash bars: the body pea clip is universally adjustable, and the angle is flexible, not only suitable for bicycle horizontal bars, but also for slash bars6. The remote control connector is free from disassembly design. After use, just remove the bicycle bracket, and the remote control connector can be removed7. Outdoor follow-up shooting, intelligent follow-up: Fix the remote controller with screen through the bicycle bracket to realize shooting while riding outdoors8. Note: The product only includes the bracket, no other items are included9. Applicable models: suitable for DJI Mini 3 Pro10. Material: aluminum alloy11. Size: 13.2x15.1x4cm12. Net weight: 145.3g13. Gross weight: 164.5gInstallation steps:1. Tighten the remote control connector on the bicycle bracket by rotating clockwise2. Use a screwdriver to turn the screw to secure the bike to the remote3. Remove the knob and clamping block in turn4. Install and fix the clamping block first5. After tightening the knob6. The installation is complete

Read more less

Features:1. Based on Qualcomm platform, supports 5G NSA and SA networking, and supports multi-mode and multi-band2. Multi-constellation dual-frequency positioning: GPS, Beidou, Glonass, Galileo, QZSS3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi or Jetson Nano motherboard for high-speed 5G communication4. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 / RM5XX series, set by DIP switch5. Onboard UART, PWR and RST control pins with built-in voltage level converter enabled via DIP switch for use with hosts such as Raspberry Pi or Arduino6. The onboard USB-C interface can be turned on by a switch to connect an independent power supply to the module, supporting more loads and providing stable and flexible power supply.7. Onboard power switch, reset button and LED indicator light for easy switching on and off or monitoring module operating status8. 4 x SMA to IPEX antenna connectors with pre-soldered SMA terminals for antenna connection9. 2 x SIM card slots, dual SIM card single standby, can be switched by AT command10. Onboard audio jack and audio decoder for audio operations such as making phone calls11. High-efficiency power circuit, output current up to 3AProduct parameters:1. 5G standard: 3GPP R162. Chip: Qualcomm Snapdragon X623. Sub-6G: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n794. LTE-FDD: B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B325. LTE-TDD: B38, B39, B40, B41, B42, B436. WCDMA: B1, B5, B87. GNSS: GPS, GLONASS, Beidou, Galileo, QZSS8. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL)9. LTE: 1 Gbps (downlink)/200 Mbps (uplink)10. HSPA+: 42 Mbps (downstream)/5.76 Mbps (upstream)11. Operating system: Windows/Linux/Android12. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.013. Dial-up: RNDIS, NDIS, PPP, MBIM14. SMS: supports MT, MO, CB, text, PDU15. Firmware upgrade: Support firmware upgrade through USB port16. SIM card: 1.8V/2.95V17. Antenna: suitable for 3G/4G/5G/GNSS, 6 × IPEX-4 connector, 4 × IPEX-4 connector18. Power supply: 3.135-4.4V

Read more less

1. XT30 VCC power supply:- Matrix Mavic 3E/3T: 12-17.6V 4A- Matrix M30 Series: 19.2-26.1V 4A- Matrix M300 RTK: 24V 4A- Matrice 350 RTK: 24V 4A- XT30 12 Volt Power Supply: 12V 4A- XT30 5 volt power supply: 5V 4A2. The E-Port of the aircraft can be converted into a variety of standard hardware interfaces, including XT30 power output interface, USB 2.0 interface, UART/PPS signal interface, which is convenient for developers to connect hardware devices and SDK development and debugging3. Adaptable products: DJI Matrice 350 RTK, Matrice M300 RTK, Matrice M30/M30T, Mavic 3E/3T4. Packing list:- E-Port adapter board x 1- Pin protection plug x 1- E-Port coaxial cable (15cm) x 1- XT30 to USB-C power cable (30cm) x 1- XT30 to DC5.5 power cord (30cm) x 15. Warm tips:- When using the adapter board alone for debugging, be sure to place the adapter board in a suitable position to avoid contact between the adapter board and the aircraft arm, or it may cause a short circuit- If you need to integrate the adapter board into a finished load, be sure to design a heat sink and metal case- If you find any sparks, smoke, burning odor or other abnormalities after powering up the adapter, please turn off the power immediately- If all three XT30 power outputs are used at the same time, the total output power should be less than the maximum output power of one channel of the aircraft. Be sure to develop loads within the limits of the output specifications6. Adapter plate size: 55 x 40 x 9 mm

Read more less

1. When riding in the wild and taking photos, you can fix the RC 2 remote controller on the handlebar and control the remote controller while riding.2. CNC precision-machined aluminum alloy remote control bracket has high strength and hardness, making it durable and more secure.3. Without connecting the aluminum alloy remote control bracket, it can also be used as a separate sports camera riding clip to hold the sports camera.4. Applicable models: Applicable for DJI RC 25. Material: aluminum alloy + plastic

Read more less

1. Propellers specially made for DJI Mini 3 produce less noise and have undergone precise dynamic balancing tests to enhance aerodynamic efficiency and powerful thrust.2. Tips：Follow the instructions and attach propellers to the correct frame arms.When changing propellers, use the propellers in the same package. Do not mix propellers from different packages.Specifications:1. Diameter × Thread Pitch: 6.0 × 3.0 inches2. Weight (each): 0.9 grams3. Compatibility: DJI Mini 3In The Box:Propellers (pair) × 2Screws × 12

Read more less

1. Suitable for Insta360 X3 panoramic camera fully invisible waterproof housing lens protection; 2. Made of flexible and soft silicone, thick and durable, with a certain degree of elasticity, it fits well and protects the lens; 3. The surface is spray-coated, beautiful and elegant, comfortable to touch and easy to clean; 4. It helps prevent dust, smudges and scratches on camera lenses or protective lenses; 5. Simple and convenient installation and disassembly;

Read more less

1. The double-sided multi-layer nano-coating process is used to give the lens high-quality waterproof, oil-proof, stain-proof and scratch-proof properties. Provide more safety for your drone.2. Using professional optical glass lenses, the image is clearer3. The frame is made of high-quality materials, is light weight, strong and corrosion-resistant, does not affect the normal flight of the drone, and can better protect the lens.4. It can be adjusted by adjusting the scale to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and beautiful, and achieve blockbuster effects such as foggy water, night light trails, etc.5. Buckle-type fixation, easy to disassemble and assemble6. Suitable for DJI Mini 4 Pro drone?

Read more less

1. The motorcycle helmet chin clamp mount can be reused and supports multiple angle adjustments to help you capture wonderful moments.2. Clip-on bracket makes installation more convenient, does not damage the helmet paint, and does not affect the closing of the helmet lens.3. Quick disassembly/assembly design, easy to use4. Anti-slip mat + anti-slip particles + safety rope, stable and secure and not easy to fall5. Safe and stable, the maximum carrying capacity is greater than or equal to 5kg6. Helmet thickness range: 18-35mm7. Set 2 comes with a mobile phone clip, which can hold mobile phones with a width of 55-105mm.

Read more less

1. Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones.2. Input: 5-20 V, max 3 A3. Input (Power Accumulation): Max 65 W4. Output (Charging): Max 17 V5. Output (USB): 5 V, 2 A6. Charging Method: Three batteries charged in sequence7. Recommended chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers8. Compatibility:DJI Avata 2In The Box:DJI Avata 2 Two-Way Charging Hub × 1

Read more less

1. Engineered for DJI O4 video transmission with an integrated antenna design, it is lighter than its predecessor and boasts a longer operating time. The control sticks are extended by 2 mm, catering to single and dual-fingered control.2. In addition to Normal and Sport modes, the DJI FPV Remote Controller 3 offers Manual mode, better suited for advanced players to practice and master more sophisticated skills.Tips1. For a tailored control stick feel, it is recommended to use the included screwdriver for adjustments. For more details, check the manual or tutorial videos.2. DJI FPV Remote Controller 3 is compatible with a variety of simulators including Liftoff, Uncrashed, DCL, and The Drone Racing League.Specification:1. Weight: Approx. 240 g2. Dimensions: 165×119×62 mm (L×W×H)3. Operating Time: Approx. 10 hours4. Charging Time: Approx. 2 hoursCompatibility:DJI Avata 2DJI Goggles 3In The Box:DJI FPV Remote Controller 3 × 1DJI FPV Remote Controller 3 Control Sticks (Pair) × 1L-shaped Screwdriver × 1

Read more less

1. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying.2. With the DJI 30W USB-C Charger, three Intelligent Flight Batteries can be fully charged in just three hours, and three Intelligent Flight Batteries Plus can be fully charged in just four hours.Specifications:1. Model: CHX162-302. Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargers3. Input: 5 V, 3 A/9 V, 3 A/12 V, 3 A4. Output (USB): 5 V, 2 A5. Operating Temperature Range: 5- 40 degrees celsius (41-104 Fahrenheit)6. Charging Time: Three Intelligent Flight Batteries can be fully charged in about three hours.Compatibility:DJI Mini 4 ProDJI Mini 3 ProDJI Mini 3Packing list:Two-way Charging Hub × 1

Read more less

1. Large capacity, huge capacity. It can store the head, double-layer quick-release plate, battery handle, portable adapter handle and tripod, as well as lens fixing bracket, data cable, screw set and other accessories.2. Professional waterproofing, the safety box is tightly closed and sealed, which can effectively prevent water leakage when splashing or sprinkling water.3. High strength, impact resistance, corrosion resistance and high and low temperature resistance. Made of super impact-resistant hard material, it is anti-fall, resistant to smashing, not easily deformed, and has strong load-bearing capacity.4. High-quality EVA shock-proof inner support, precise mold opening, tight storage and protection of your equipment.5. Comfortable soft rubber handle, comfortable in hand, non-slip and wear-resistant, relieving hand pressure.6. Product size: 35.4x29.4x13.7cm7. Net weight: 1.59kg

Read more less

1. The large capacity kit can store the gimbal, battery grip, double-layer quick release plate, handgrip extension tripod, as well as small accessories such as lens mounts, data cables, and screw sets.2. Precise mold opening, stable storage of machines and accessories, shock absorption and drop prevention, meticulous care.3. It can be carried on one shoulder or by hand, and the length of the shoulder strap can be adjusted freely.4. Material: High-quality fabric + cloth lining 5. Product size: 28x26.7x8.5cm 6. Net weight: 617g

Read more less

1. PC material, resistant to pressure and corrosion; fit the lens design, effectively protect your camera lens and prevent scratches; 2. The light transmittance of the lens material is as high as 95% or more, which preserves the picture quality to the greatest extent; 3. Reasonable design, simple and convenient installation and disassembly; 4. Applicable models: For Insta360 X4

Read more less

1. Designed for Insta360 X4, adapted to your device, so you can easily enjoy the fun of horizontal shooting 2. Mount the X4 horizontally, and easily shoot horizontally at various angles, so that you can be more skillful in shooting. 3. Unique variable interface design, support 1/4 inch screw port and two-jaw interface, to adapt to the needs of various equipment, easy to adapt to a variety of models. 4. The bracket is simple, lightweight and durable, and remains stable even after a long time of use. 5. Whether you are shooting outdoors or indoors, the X4 horizontal bracket can provide you with stable support and make your work more outstanding.

Read more less

1. Made of high-quality materials and durable;2. The microphone can be expanded to record anytime and anywhere;3. Reserve a hole at the bottom to connect a 1/4 selfie stick, tripod, etc.;4. Small, lightweight and easy to carry.5. Main material: aluminum alloy6. Net weight: 12.7gPacking list: Microphone extension ×1, adapter cable ×1

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V2A, or 2A or more PD power adapter)3. Output: 4.35V 2.5A4. Charging time: about 80min5. Material: ABS6. Weight: about 84g7. Size: about 13.52 x 5.62 x 2.52cm8. Description: only the charging case, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, can identify high and low battery, prioritize to fill the high power battery3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. Two-color injection molding process, the shell of the inner layer of hard rubber, the outer layer of soft rubber, one-piece molding, soft and hard to hold in the hand, good texture7. Lightweight and portable, can be easily put into the pocket8. Multi-protection, over-current/over-voltage/over-charging/short-circuit/overload/fire protection9. With charging indicator

Read more less

1. Variable interface, bottom 1/4 threaded port + folding for GoPro interface 2 in 1, adapt to more accessories 2. Built-in non-slip rubber pad, no damage to the camera, more stable 3. Aluminum alloy material, lightweight and durable 4. Horizontal mounting, unlocking more ways to play and view 5. Material: Aluminum alloy, silicone

Read more less

Features1. The screen protector is suitable for the Insta360 X4 pocket camera. The precise edges and corners of the real camera are seamlessly connected and formed in one piece. It does not allow dust to enter or block the screen. 2. Easy to install, a complete set of tempered films are provided for you to apply worry-free and easy to remove without leaving any residue. 3. Make the screen protector have a higher hardness to prevent the camera screen from being scratched by high-intensity drops, keys and knives, etc., with full screen coverage, secondary reinforced edges, scratch resistance and wear resistance without chipping. 4. Very thin, giving you a highly transparent and crystal-clear viewing experience, ultra-low reflection, high-definition picture quality, all colors on the screen are vividly displayed without any distortion, and will not reduce sensitivity, easily sensing every touch of your finger. 5. Hydrophobic and oleophobic coating, water dripping into beads, effectively prevents fingerprints.Package List1. Alcohol cotton dry and wet pack x2 2. Dust removal sticker x2 3. Protective film x2 4. Scraper x1 5. Storage box x1

Read more less

1. The anti-collision ring specially designed for DJI AVATA 2 drone propeller protector is precisely molded, fits well, and has a solid design, providing cushioning and protection for the AVATA 2 propeller protector.2. The anti-collision ring is installed on the Avata 2 propeller protector. It uses TPU material to absorb impact and has a fortress-style all-inclusive design to protect the Avata drone from accidental collision with trees, walls or any other obstacles.3. The TPU protective cover requires no tools to install and can be stuck on the propeller protective cover. It is easy to install and remove, will not scratch the drone body, and does not affect the installation of the gimbal protective cover and STARTRC bumper. It is compact in size. Easy to store.4. Made of high-quality lightweight materials, high strength, good toughness, light weight, and lightweight design will not add extra burden to the flight of AVATA 2, and it will not shake or fall off during flight.5. Size: 96.7x51x19mm6. Weight: 48.9g

Read more less

1. Multifunctional Adapter Mount. Apply to Action 2 camera unit, Insta360 Go 3 camera, Insta360 Go 2/1 and drone light, etc. 2. Gift 1/4in Adapter. Directly install devices with 1/4 screw hole. 3. Locked by Screws & Stable Installation. 4. Can be used with Sunnylife Drone Light. 5. Material: Plastic 6. Product Size: 45x39x26mm 7. Net Weight: 7g???Adapter Mount Only)

Read more less

1. Interface: USB2.02. Installation: external3. Use the appropriate adapter to support: MiniSD//Micro SD/RS-MMC/HS RS MMC4. Support memory card type: SmartMedia card, XD card, CF card, SD card, MS Memory Stick, MS Long Stick, MS Short Stick5. Connect to PC to read and write 4 cards at the same time, more efficient6. Multi-disk character display, insert the corresponding memory card to display the corresponding indicator light7. Plug and play, support the working status LED indicator8. No data loss in case of power failure, low power consumption9. Mini size, can be put into the bag to facilitate carrying out10. This card reader can only be read on a desktop computer USB portNote: delivery only the card reader, does not include other items in the picture

Read more less

1. Type: USB C to DC Adapter 2. Material： PVC 3. Function： Charging 4. Power：140W 5. Output：20V/7A

Read more less

1. Type: USB C to DC Adapter 2. Material： PVC 3. Function： Charging 4. Power：140W 5. Output：20V/7A

Read more less

1. Suitable for ROG ALLY modified M2 hard drive adapter card, using large-capacity 2280 SSD to replace small-capacity 2230 SSD, taking your gaming experience to a new level.2. This riser card features a 90-degree angle design, making it ideal for compact PC builds.3. This high-speed M2 transfer card enables seamless data transfer, ensuring a smooth gaming experience and reducing loading times.4. Supported hard drive size: 22 x 80mm5. Note: SSD not includedinstallation method:1. First install the 2280 to be replaced into the hard disk enclosure and prepare for system cloning.2. Turn on the game console and enter the system, connect the hard disk box, open DiskGenius, and use the "System Migration" function to clone the original 512G system disk to the new disk.?

Read more less

Product Name：DP 1.4 to mini DP Adapter 8K 60Hz HD Video Transmission ExpandingFunction：video/data transmissionResolution ：8K 60Hz/4K 120HzTransmission Rate：32GbpsProduct weight：15g

Read more less

1. Conductor material: tinned copper2. Wire type: 26AWG3. Interface type: 2Pin one female to two male4. Product interface: DuPont 2.54mm, 2P rubber case5. Product function: computer switch IO line extension, boot / restart one-point-two, and laboratory DIY operations, etc.6. Weight: about 1.5 g/pc7. Length: about 10 cmFeatures1. Tinned copper conductor material, with good electrical conductivity and corrosion resistance2. 2P rubberized DuPont 2.54mm connector, easy to connect with other 2.54mm connectors3. 10cm length, suitable for connecting short distance circuit components4. Light weight, easy to carry, very suitable for circuit experimental operations, or one of the most practical circuit connection cable

Read more less

1. Material: 18AWG 41 x 0.16TS foot standard wire2. Undertake current: 10A3. Excellent material, durable, not easy to break, good heat dissipation performance, can be used for a long time4. Easy to use, just plug and play, no driver required, easy to install and use, fast and stable transmission5. Compatible with ARESGAME modular PSUs: AGK750, AGK850, AGT1000, AGS750, AGS8506. Compatible with thermaltake modular PSU: RGB GOLD, RGB PLATINUM, ARGB GOLD, Toughpower TF1 GF1 PF1 GF3 SFX7. Compatible with Corsair modular PSU: AX1600i (TITANIUM), AXi, AX (TITANIUM and PLATINUM), HXi, HX (PLATINUM and GOLD), RMi, RMX, RM, SF, CS-M, CX-M, TX-M8. Usage: directly connected to the power supply module end (PSU) 8PIN, transfer out of the graphics card magic 8PIN (6 + 2) power supply, this connection is a single 8PIN (6 + 2)9. Length: 50 cm, 60 cm

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, comfortable and breathable, with good heat dissipation effect4. Reserved holes for heat dissipation at the bottom to speed up heat dissipation5. Magnetic design, more convenient to use6. The edge of the protective case exceeds the fuselage by 2mm to avoid wear and tear on the corners of the computer.7. The exterior is made of super fiber material, which is anti-slip, sweat-absorbent and comfortable to the touch.8. Note: Only the protective cover will be shipped, nothing else!

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, comfortable and breathable, with good heat dissipation effect4. Reserved holes for heat dissipation at the bottom to speed up heat dissipation5. Magnetic design, more convenient to use6. The edge of the protective case exceeds the fuselage by 2mm to avoid wear and tear on the corners of the computer.7. The exterior is made of super fiber material, which is anti-slip, sweat-absorbent and comfortable to the touch.8. Note: Only the protective cover will be shipped, nothing else!

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, comfortable and breathable, with good heat dissipation effect4. Reserved holes for heat dissipation at the bottom to speed up heat dissipation5. Magnetic design, more convenient to use6. The edge of the protective case exceeds the fuselage by 2mm to avoid wear and tear on the corners of the computer.7. The exterior is made of super fiber material, which is anti-slip, sweat-absorbent and comfortable to the touch.8. Note: Only the protective cover will be shipped, nothing else!

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, comfortable and breathable, with good heat dissipation effect4. Reserved holes for heat dissipation at the bottom to speed up heat dissipation5. Magnetic design, more convenient to use6. The edge of the protective case exceeds the fuselage by 2mm to avoid wear and tear on the corners of the computer.7. The exterior is made of super fiber material, which is anti-slip, sweat-absorbent and comfortable to the touch.8. Note: Only the protective cover will be shipped, nothing else!

Read more less

1. This is 1 RJ45 port female to 2/3/4 port female, can also be used in reverse, 2/3/4 RJ45 female port to 1 RJ45 female port2. Support 1000Mbps network3. Simultaneous access to IPTV Internet broadband4. Aluminum material, compact size5. Realize a network cable two network devices work at the same time, a network port two computers at the same time to access the Internet, IPTV and router networking at the same time, a network cable connected to two monitors5. Solve the problem of insufficient network cable, suitable for set-top boxes, routers, computer monitors and other network equipment6. Can realize the free connection between various network devices7. Please use 5V 1A power supplyPacking list:- Distributor x 1 - Power cord x 1 - User manual x 1

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, it feels comfortable and anti-slip, absorbs sweat and has good heat dissipation effect.4. Magnetic adsorption design, easy to use and easy to use5. The edge of the protective cover extends 2mm beyond the body to avoid corner bumps and wear.6. Note: There is only a protective cover in the package and no other items are included.

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, it feels comfortable and anti-slip, absorbs sweat and has good heat dissipation effect.4. Magnetic adsorption design, easy to use and easy to use5. The edge of the protective cover extends 2mm beyond the body to avoid corner bumps and wear.6. Note: There is only a protective cover in the package and no other items are included.

Read more less

1. Human nature design, easy installation 2. Driverless(except of win98) 3. Super slim and easy portability 4. The maximum support capacity 400GB 5. External power Supply 6. AC input: 100-240V/50-60Hz 7. DC output: 5V/12V 8. Shell material: Aluminum 9. Dimension: 185x110x33mm 10. Supports Windows 98/SE/ME/2000/XP, Mac OS8.6 or latest version

Read more less

1. Material: PU leather, super fiber2. Purpose: protect and store laptops3. Made of PU material, comfortable and breathable, with good heat dissipation effect4. Reserved holes for heat dissipation at the bottom to speed up heat dissipation5. Magnetic design, more convenient to use6. The edge of the protective case exceeds the fuselage by 2mm to avoid wear and tear on the corners of the computer.7. The exterior is made of super fiber material, which is anti-slip, sweat-absorbent and comfortable to the touch.8. Note: Only the protective cover will be shipped, nothing else

Read more less

1. Compatibility: Silicone ear pad protective cover specially designed for Sony ULT Wear WH-Ult900N, which can prevent the ear cap shell from scratches and collisions.2. Material: Made of high-quality silicone, strong plasticity, soft and durable.3. Soft and comfortable, meeting daily wearing needs without any sense of oppression4. The buttons are easy to reach: Installing the silicone protective cover will not affect the use of the headset buttons, microphone and charging port. There is no need to remove the protective cover during charging.5. Easy installation: Align the headphone protective cover with the headphone buttons, put it on lightly and complete the installation.Packing list: 1 pair of ear caps (headphones not included)

Read more less

1. Can be connected to a computer as a card reader2. With EQ sound effect selection function3. Bluetooth + card dual mode selection4. With battery level display5. Built-in 800 mAh large lithium battery, continuous listening to music for 100 hours6. The three-point anti-falling design is adopted, which is comfortable to wear and does not fall off.7. Graphene diaphragm, the sound is smooth and clear8. Skin-friendly silicone neck hanger, which can be bent arbitrarily9. Convenient magnetic design, no earphone cord entanglement10. IPX3 level waterproof, sports without fear of sweating11. Bluetooth version: 5.0+EDR12. Signal-to-noise ratio: 95 decibels13. Sensitivity: 101.7dB +/3dB14. Charging current: 5V 1A15. Headphone cable length: 200mm16. Transmission distance: 10 meters without obstacle17. Packing list: data cable x 1, ear caps x 3 pairs, manual x 1

Read more less

1. Material: protein leather/mesh2. Soft and comfortable, meet the needs of daily wearing, no pressure3. Good air permeability, not easy to crack4. Easy to replace5. Good sound insulation, anti-slip, good air permeability and elasticity

Read more less

1. Material: protein leather, sponge, mesh2. Sound insulation, non-slip, good air permeability and elasticity3. Fitting, original sound lossless noise reduction4. Skin-friendly material, full-ear design, soft and comfortable5. High-density sponge, light and thin to isolate dust, no sound leakage6. Self-contained buckle design, easy and fast installation7. Made of protein leather, long-term wearing without ear pain8. Size: 85x100mm

Read more less

1. Material: protein leather, sponge, mesh2. Sound insulation, non-slip, good air permeability and elasticity3. Fitting, original sound lossless noise reduction4. Skin-friendly material, full-ear design, soft and comfortable5. High-density sponge, light and thin to isolate dust, no sound leakage6. Self-contained buckle design, easy and fast installation7. Made of protein leather, long-term wearing without ear pain8. Size: 85x100mm

Read more less