Consumer Electronics

1. Mainly used to test various battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, discharge energy, power consumption and running time, and display the measurement data through the LCD screen.2. Voltage:- Measuring range: 0-200V. (When the test voltage is less than 8V, please use the independent power supply method)- Display format: less than 10V display such as: 9.99VBelow 100V such as: 99.9VMore than 100V display such as: 199V- Minimum resolution: 0.01V-Start test voltage: 0.05V- Measurement accuracy: 1%3. Current:- Measuring range: 0-10A (Model: PZEM-013)0-300A (Model: PZEM-015)- Display format: less than 1A display as: 999mALess than 10A is displayed as: 9.99aLess than 100A is displayed as: 99.9AGreater than or equal to 100A is displayed as: 199A- Minimum resolution: 1mA-Initial test current: 10mA (Model: PZEM-013)20mA (Model: PZEM-015)- Measurement accuracy: 1%4. Power:- Measuring range: 0-2000W (Model: PZEM-013)0-60000W (Model: PZEM-015).-Display format: less than 10W display as: 9.99WLess than 100W displayed as: 99.9WLess than 1000W displayed as: 999WLess than 10000W display as: 9.99kWGreater than or equal to 10000W displayed as: 19.9kw- Minimum resolution: 0.01W-Initial test power: 0.1W (Model: PZEM-013)0.2W (Model: PZEM-015)- Measurement accuracy: 1%5. Impedance:- Measuring range: 0-1000Ohm- Display format: less than 100Ohm displayed as: 99.9OhmGreater than or equal to 100Ohm displayed as: 999ohmWhen the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 0.1ohm- Measurement accuracy: 1%6. Internal resistance:- Measuring range: 0-999Milliohm-Display format: 999Milliohm When the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 1Milliohm- Measurement accuracy: 1%Note: Before testing the internal resistance, you need to preset the full voltage according to the battery type, and you can test it after it is fully charged; if it is not fully charged, you can set the no-load battery to the full voltage, and then test it; the internal resistance is not a fixed value, the more the battery is discharged, the more The more, the higher the resistance.7. Capacity:- Measuring range: 0-1000Ah- Display format: less than 1AH is: 999mAHLess than 10Ah displayed as: 9.99 AhLess than 100AH ??is displayed as: 99.9ahLess than 1000AH is displayed as: 999AH- Minimum resolution: 1mAH- Measurement accuracy: 1%8. The discharge energy is represented by the battery symbol, with a total of 10 grids, and each grid represents 10% of the power.9. Energy- Measuring range: 0-9999kWh-Display format: less than 1kWh display as: 999WhLess than 10kWh displayed as: 9.99kwhLess than 100kWh is displayed as: 99.99kwhLess than 1000kWh is displayed as: 999.99kWhGreater than or equal to 1000kWh displayed as: 9999kWhReturn to zero on overflow- Minimum resolution: 1Wh- Measurement accuracy: 1%

Read more less

1. Outdoor air condition. 2. Good gift for children and girl. 3. Power: USB powered. 4. There is a chargeable lithium battery inside, charging for 5 hours, the battery will be full, it can keep working for 1 hours, the machine has a USB charge line as a accessory. 5. The machine has two operating mode, freezing and natural air. - Freezing mode: It is high technology by evaporating and freezing water. Make the sponge wet, put it in the sponge reserving zone of the behind of machine. State up the power, it can make the cool air. - Natural air mode: Take out of the sponge, turn the power on will achieving the natural air. 6. This machine is not waterproof, so when you wet the sponge, please take it out, it is prevent from wet the machine to burn it out.

Read more less

1. Small and easy to carry, it can be used to measure jewelry, leather, metal plate, paper, film, wire and similar materials.2. Accurate measurement and easy operation3. Material: metal4. Color: silver5. Measuring range: 0-10mm6. Measurement accuracy: 0.1mm

Read more less

1. Power supply: 230V AC 50/60Hz2. Current: 40/63A3. Over-voltage protection value range: 230-300V4. Under-voltage protection value range: 210-140V5. Installation: 35mm DIN rail6. Material: ABS + electronic components7. Size: about 8.5x6.5x3.7cm8. Weight: about 184 gramsFeatures:1. Over-voltage protection2. Under-voltage protection3. Over-current protection4. Automatic recovery5. Adjustable recovery delay time6. Voltage display (voltage measurement)7. Current display (current measurement)

Read more less

1. Material: metal+ABS2. Support history saving3. Support temperature offset4. 4.3 inch LCD screen display, history record preservation5. Temperature unit between celsius and fahrenheit switch6. CO2 Technology: Infrared (NDIR)7. CO2 detection range: 400ppm -5000 ppm8. CO2 alarm value: 1000ppm9. CO2 alarm on/off function (if you dont like the alarm, you can manually set it to turn off)10. Power supply: rechargeable lithium battery 3000mAh11. Can detect CO2 (carbon dioxide), temperature and humidity, with clock and recording functions12. Combining infrared (NDIR) sensor with built-in fan, it can monitor carbon dioxide (CO2), temperature and humidity in real time on its digital LCD display13. Product size: 145x78x97.2mm14. Product net weight: 225 gramsPacking list:- Host x 1- Manual x 1- Charging cable x 1

Read more less

1. Base board for Compute Module 4 Lite / eMMC 2. Standard CM4 socket, with multiple peripheral interfaces, suitable for narrow application environment Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Connector: Raspberry Pi 40PIN GPIO interface x 1 3. USB: USB 2.0 Type A interface x 1 4. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 5. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 6. Power: 5V 7. Size: 55 x 40mm Package list 1. CM4-NANO-A x1 2. 2 x 20PIN color-coded straight pinheader x 2

Read more less

1. Supports adding devices to Home Assistant for control and automation via the eWeLink plugin. Additionally, to help you save energy, POW Elite includes an Alexa Energy Dashboard where you can centrally view your devices overall or individual energy consumption. POW Elite also supports IFTTT and eWeLink web control if you subscribe to the eWeLink Advanced plan.2. POW Elite has a flame rated V-0 housing, improved terminal wiper and more tin volume, reducing safety risks3. LCD Display: Track your appliances wattage, current, voltage and cumulative energy consumption in real time on the LCD screen.4. Support 20A load (max), POW Elite is compatible with more home appliances.5. The power consumption data (accurate to the hour) can be stored for 6 months (longest) and can be exported to excel on the mobile phone.6. Overload protection: Thresholds for power, current and voltage can be set. Once any condition is met, POW Elite will shut down to protect your device.7. Complete functions: POW Elite has all the basic functions, such as APP control, voice control, LAN control, timing, jog setting, power status, etc.parameter:1. Wi-Fi: IEEE 802.11b/g/n 2.4GHz2. Input/Output:-16A: 100-240V-50/60Hz 16A Max-20A: 100-240V-50/60Hz 20A Max3. Dimensions: 98 x 54 x 31mm

Read more less

1. Mainly used to filter dust and sundries to make the hair dryer work normally2. Protect internal systems and reduce noise3. High fit without leaving gaps4. 30 mesh filter screen cover, strong interception of various dust impurities5. Suitable for Dyson HD01 HD03 HD08 hair dryer6. Dimensions: 37.7 x 47.4 x 26.4mm7. Weight: 6.1g

Read more less

1. Flannel + lambskin fabric is double warm. It is also very warm when unplugged2. Hidden zipper is practical and beautiful3. Power: 10W4. Temperature range: 40-55 degrees Celsius5. Size: 27.5 x 32 x 8cm6. Weight: 330g7. USB cable length: 1.2 meters

Read more less

1. High rotation speed, long service life2. Suitable for kitchens, greenhouses, pet houses, chicken coops, tree houses and trailers, while maintaining a comfortable temperature level3. Noise: below 36dB4. Output port: USB DC 5V5. Power supply: solar energy6. Switch type: single controller7. DC wire length: 150cm8. Solar panel power: 20W9. Solar operating voltage: 24V10. Solar cells: high efficiency of single crystal cells11. Solar panel size: 145x145mm12. The solar panel is laminated epoxy resin surface, waterproof IP65 can adapt to harsh outdoor environment, improve durability13. Solar vacuum cleaner powered by solar panels, equipped with standard USB voltage regulator to maintain output, can be used in the outdoor anytime, anywhere, convenient and fast14. The conversion efficiency is high, and external solar panels can effectively convert sunlight into electricity.15. The portable exhaust fan can effectively help you to keep the indoor air circulation, keep the air clean can help you eliminate the smell of pets, tobacco, etc.16. Packaging contents: Solar panel x1, exhaust fan x117. Weight: 230g18. Hood size: about 120x120mm

Read more less

1. 12V power supply, power failure memory2. With bluetooth call and recording function, bluetooth version 5.03. Decode MP3, WMA, WAV, FLAC, APE lossless format music4. Read USB disk, support SD interface5. Support FM radio, frequency band (87.5MHZ-108.0MHZ)6. External audio input LINE IN 7. Support 10m distance infrared remote control operation8. Pushbuttons: six buttons for multi-directional control, REC / REPEAT / VOL- / AUTO / VOL+ / MODE9. Large remote control uses 2 x 7 batteries (not included), small remote control uses button batteries10. Dimensions: length 112 x width 62 mmKey operation details.1. REC: Press the REC button to start recording, press the REC button again to cancel the recording function and play the recording file; when recording than a storage device needs to be connected, e.g. U disk or TF card2. REPEAT: Press once for the single song loop function, then press again to cancel the single song loop and play in sequence3. FD-: switch to the previous folder, long press to fast back4. FD+: switch to the next folder, long press to fast forward5. AUTO button (play/pause): short press for play/pause in MP3; short press for play/pause in FM, long press for auto receive and save station; short press for play/pause in Bluetooth6. MODE button: switch between USB / SD card / FM / Audio input / Bluetooth function in sequence

Read more less

Features. 1. Transnational communication, face-to-face communication, foreign language learning communication 2. One button operation, HD noise reduction 3. Large-capacity battery, long-lasting life 4. Automatic online upgrade 5. Photo translation, support 44 languages, instant translation, translate menus, road signs, signs, articles, etc. 6. 138 languages (French, Russian, Portuguese, Dutch, Spanish, Japanese, English, Chinese, Polish, Danish, Thai, Finnish, Turkish, Arabic, etc.), all over the world 7. 2.4 inches HD screen, 14 languages offline (Chinese, English, Japanese, German, Korean, French, Russian, Italian, Portuguese, Dutch, Spanish) 8. Recorded translation not only with auxiliary records, but also into other foreign languages; built-in large-capacity storage, no need to worry about meeting again; record the content of the meeting and translate afterwards 9. Offline automatic translator engine, intelligent evolution, can translate quickly even when the network signal is poor or no network 10. 4 types of recorded translations: Traditional Chinese, Mandarin / Simplified Chinese, English (US), Cantonese Parameters. 1. Operation mode: button + touch 2. Operating system: Android 3. Battery capacity: 1500mAh 4. Power supply: USB charging / built-in lithium battery 5. Translation engine: Google 6. Networking method: WiFi/Hotspot 7. Wireless distance: 5m 8. Charging head: 5V 1A 9. Number of keys: 5 10. Voice recognition: Google SR 11. Memory: 2G 12. Read-only memory: 32G 13. Standby time: 100 hours 14. Usage time: 4 hours 15. Screen size: 2.4 inches 16. Size: 136x55x13.5mm Packing list. -1 x Translation pen -1 x Data cable -1 x Instruction manual -1 x Box

Read more less

1. Compatible models: suitable for Dyson hair dryer HD08, HD01, HD02, HD03, HD04, HD08, HD152. It has two modes of smooth hair and anti-flyaway hair, which can quickly dry hair and smooth frizz at the same time, creating a glossy look3. The airflow penetrates deep into the comb teeth, detangling and smoothing the hair for easy daily styling4. Material: ABS5. Size: 13 x 10.8cm6. Weight: about 117 grams7. Note: The product is only the air nozzle, not including the hair dryer

Read more less

1. For Dyson V11 Absolute Extra, V11 Fluffy Extra, V11 Absolte Pro, V11 Absolute, V11 Fluffy, V15 Detect Total Clean, V15 detect fluffy series2. Easy to install and disassemble, highly matched with the equipment3. It is recommended to replace the spare parts every 2 to 3 months, depending on the frequency of use, to maintain the best performance of the machine4. Weight: about 101 grams5. Size: 23.5 x 5cm1. For Dyson V11 Absolute Extra, V11 Fluffy Extra, V11 Absolte Pro, V11 Absolute, V11 Fluffy, V15 Detect Total Clean, V15 detect fluffy series2. Easy to install and disassemble, highly matched with the equipment3. It is recommended to replace the spare parts every 2 to 3 months, depending on the frequency of use, to maintain the best performance of the machine4. Weight: about 101 grams5. Size: 23.5 x 5cm

Read more less

Features1. Plug & play: Easy to use, switch on and plug in the receiver to connect automatically. The cell phone microphone has a mini body, it is an easy clip-on mic and enhances personal privacy protection, portable storage bag allows you to take it anywhere. This clip-on mic is a tailored gift for whom loves live stream, vlogging, recording video, etc. 2. Compatible Android devices: Wireless lapel microphone compatible for Android phone/ tablet with USB Type-C port (Support OTG function). 3. Performance wireless system: The transmission mic built in rechargeable battery. 20m/65Ft Barrier-free connection, 360 degree omnidirectional sound reception, recording every detail. 4. Noise reduction: Omnidirectional cell phone microphone with professional-grade noise reduction chips and wind muff, enjoy intelligent noise reduction technology, effective identification of the original sound, clear recording in noisy environment. 5. Real-time auto-sync technology: The wireless mic supports multi-channel real-time mixing, it can synchronize the background music for phone and human voice in real time, reduce the video post-editing, offers professional full band audio. 6. Support phone charging: The receiver with input charging interface, support phone charging.SpecificationPerformance parameters: 1. Chip: Professional 2.4GHz wireless microphone chip 2. Microphone Sensitivity: -38dbm 3. Normal mode recording sample rate: 44.1K 4. Noise reduction mode recording sampling rate: 32K 5. Transmit power(MAX): 10dbm 6. Indoor barrier-free straight distance: 15-20 meters 7. Outdoor barrier-free straight distance: About 10 meters 8. Charging port: Type-C 9. Material: ABS The working current parameters of the transmitter (TX): 1. Battery capacity: 70mAh (LIR1254) 2. Power off power consumption: 2.6uA 3. Power consumption: 4mA (Power on no pairing with the receiver ) 4. Power consumption: 10mA (Power on and pairing with the receiver) 5. Power consumption: 6mA(Entering silent mode ) 6. Charging current: 70mA The working current parameters of the transmitter (RX): - Power consumption: 16mA(Plug-in phone)

Read more less

Features1. Wireless pickup microphone 2.4G: wireless connection, can provide up to 48K high-fidelity recording 2. Low latency: no sense of delay recording 3. ENC is enabled by default: Excellent noise reduction performance, easy to record in noisy environments without noise interference 4. BT mode: In BT mode, it can be used for karaoke, adding background sound during recording, etc. 5. Dodging function: When connected to BT to play music, turning on the function recording can automatically suppress background Bluetooth music 6. Reverb function: Turn on the reverb to make the sound more infectious 7. Battery life: 300mAh high-capacity battery, continuous recording for 12 hours at a time.Specifications1. Product Type: Lavalier Wireless Microphone 2. Channel system: One Microphone one Receiver 3. Control method: Button 4. Active and passive: Active 5. 2.4G solution: JieLi AD6976M4 6. Working system: GFSK 7. Working frequency: 2.4G-2.4835GHZ 8. Radio sensitivity: -38db Effective distance: Greater than or equal to 10 meters 9. Transmitter shutdown power consumption: 2ua 10. Transmitter power consumption (video mode): 25ma 11. Transmitter power consumption (Bluetooth mode): 30-40ma 12. Receiver power consumption: 16ma 13. Receiver charging current for mobile phone: 1000ma 14. Microphone signal-to-noise ratio: Greater than or equal to 65db 15. Frequency response: 20Hz-20KHz 16. Monitoring: One-way monitoring 17. Microphone: Electret 18. Battery: 300mAh 19. Talk time: More than 10 hours 20. Standby time: (off state): 6 months 21. Charging input standard: DC-5V/MAX 200+/-10mA 22. Charging time: 1.5-2 hours

Read more less

Features:1. WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.2. Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.3. Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.4. Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.5. Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.6. WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.7. Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.Product parameters:1. Tire material: nylon wheels, rubber tires2. Body material: 5052 aluminum alloy (2mm thick)3. OLED screen: 0.91 inches4. Chassis height: 33.70mm5. Tire diameter: 80mm6. Tire width: 42.50mm7. Motor: N20 12V 200RPM x 48. Number of driving wheels: 49. Running speed: 1.25m/s10. Vertical obstacle surmounting ability: 40mm11. Drive payload: 0.8kg12. Climbing ability: 22 degrees13. Minimum turning radius: 0m (rotating in place)14. Motor power: 1.5W x 415. Remote control function: WIFI AP/STA16. Upper surface area: 17551 square millimeters17. Communication interface: UART/serial bus servo interface/I2C18. Battery support: 18650 lithium battery × 3 (delivered without battery)19. Overall dimensions: 194×168×100mm20. Weight: 860g

Read more less

1. Two ratios, 16:9 rectangular ratio, suitable for home theater, KTV, entertainment, etc.; 4:3 partial square ratio, suitable for conferences, PPT playback, education and training, etc.2. Support 4K high-definition picture quality, the picture is delicate and the color is gorgeous3. Simple and portable, foldable, easy to store and carry4. The crease can be flattened with an iron, and the dust can be wiped off with a wet towel for easy cleaning5. The black edge punching model can be installed by ropes, hooks, nails, tapes, etc.6. The dark side is the viewing side, and the light side is the back7. Ratio: 16:9/4:38. Specifications: 60/72/84/92/100/110/120/130/133 inch9. Size: 60 inch about 133x75cm, 72 inch about 159x90cm, 84 inch about 186x105cm, 92 inch about 199x112cm, 100 inch about 16:9 221x125cm, 110 inch about 250x140cm, 120 inch about 266x148cm, 130 inch about 290x160cm, 133 inch about 300x160cm

Read more less

1. Design with good heat dissipation, do not have to install the cooling fan or heatsink. 2. This case is constructed out of high quality aluminum material. 3. Suitable for Raspberry Pi 4 only 4. Access to all ports of Raspberry Pi 4 5. Cable interface is reserved, support to install cable. Note: Please insert the Micro SD card to Raspberry Pi before installing the case.

Read more less

1. Recyclable and easy to disassemble;2. To prolong the life of accessories, please clean them regularly.3. Easy to disassemble and replace as part of routine maintenance.4. The filter maintains cleaning performance while reducing dust, pollen and other allergens from infiltrating the air you breathe.5. Weight:-Side brush 11g/pair-Filter 25g/pc- rag 23g/block-Rolling brush 52g/pc-Dust bag 28g/pc

Read more less

1. 17 inch LED 1440X900 resolution 16:10 screen display, metal frame. 2. Support SD, MS, MMC and so on memory card. 3. Support audio format: MPEG1VCDSVCD), MPEG2(DVD), MPEG4(DIVX,AVI), RMVB. 4. Support MP3/WMA, JPEG format 5. Support port: HDMI, USB 6. AC 100-240V DC12V 2A 7. Boot automatically play: set up the boot automatically play (such as boot automatically play music, pictures, videos, mixed). 8. This electronic photo frame be in 8 languages Chinese, English and so on. 9. Product size: 38.5*25cm

Read more less

1. Silicone handle cover specially designed for Pico Neo3 controller2. Use soft silica gel material to prevent foreign bodies from hitting or scratching the controller3. Fashion and beautiful appearance, comfortable feel4. Easy to disassemble and install dimensions :19 * 10 * 9.5cm5. 120 g in weight6. Shipping List: Silicone sleeve *2 hand rope *2 rocker cap *2

Read more less

1. High hardness aluminum alloy material, sturdy and durable2. Closely fit the timing belt, the stretching effect is better3. Turn the big knob to adjust at will4. Fine production, no burr, strong compatibility, wear-resistant and durable5. Material: aluminum alloy + stainless steel6. Surface treatment: anodizing7. Purpose: used to adjust the tightness of the Y-axis belt of the 3D printer and improve the positioning8. Applicable models: suitable for Ender 3 series9. Size: about 9.3 x 7x 1.25cm10. Weight: about 68 grams

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Every family should have some at home. 2. Lightweight, easy to carry. 3. UK plug adapter, safety to use. 4. Convenient for travel and daily use. 5. Available for below plugs: US, EU plug.

Read more less

1. This infrared thermometer is used for measuring the tem perature of the objects surface, which is applicable for va rious hot, hazardous or hard-toreach objects without contact 2. Safely and quickly3. Response time 500 mSec, 95% response4. Spectral response: 5-14 um5. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit6. 9V battery(Not Included)

Read more less

1. Measuring PH value of the solution2. Measuring the temperature of the solution3. LCD backlight hold4. Data hold 5. Temperature unit switch6. Power off memory 7. Solution temperature compensation8. Low battery indication

Read more less

1. High precision, high reliability, suitable for high-end applications 2. Small size, can display voltage and current at the same time 3. Reverse connection protection, reverse connection will not burn, using common ground design 4. Anti-collision design with shell, more durable 5. Adopt industry standard size, more convenient to install 6. Ambient temperature: -15 to 70 degrees Celsius 7. Measuring voltage: DC0-100V, 50A 8. Working voltage: DC4.5-30V 9. Working air pressure: 80-106kpa 10. Working current: less than or equal to 20 mA 11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply. 12. Dimensions: 48 x 29 x 21cm 13. Weight: about 15g

Read more less

1. Support Android, Windows, iOS same screen 2. Support system OTA upgrade 3. Max resolution: 1920x1080P 4. USB: USB2.0 5. WiFi: 2.4G 6. ScreenShare: Miracast, airplay, DLNA 7. Size: 5.6x1.6cm 8. Weight: 100g

Read more less

1. Zinc alloy keel, grip, stability and enhancement. 2. Bluetooth remote control, independent remote control, can be used after removal. 3. Stainless steel material, long service life. 4. Anti-slip pad for mobile phone holder, more stable shooting, anti-scratch and anti-drop. 5. 1020mm super long stretch, wide-angle shooting. 6. 360-degree universal adjustment, horizontal and vertical shooting, to meet different needs.

Read more less

1. Comes with dual fill light + six gears (three color temperatures)2. Umbrella-type structural stable support3. 1085mm extension rod4. Reinforced tripod + Bluetooth Selfie5. 360 degree rotation supports vertical and horizontal shooting6. Compatible with both Android and iOS.7. Selfie stick parameters:Bluetooth version: 4.0Transmission frequency: 2.4GHz-2.4835GHzWorking voltage: 3VBluetooth transmission distance: 10MSelfie battery: CR1632 (CAN CHANGE)Android system: Android 4.4 and aboveiOS system: iOS 5.1 or later8. Hardware parameters (fill light) x 2Device battery: 70mhaCharging current: DC5V/100mAWorking current: 100mAPower consumption: 115mAQuantity of white light: 4 PCSNumber of Warm Lights: 4 PCSUse time: more than 1 hourWhite light color temperature: 6500K, whole lamp lumen: 45lm, power: 0.37WWarm light color temperature: 3000K, whole lamp lumen: 39lm, power: 0.37WMixed light color temperature: 4500K, whole lamp lumens: 54lm, power: 0.41WLED lamp power: 0.2W/PCSLighting mode: warm light/cold light/cold and warm light, 6-level dimming9. Material: ABS+Aluminum alloy10. Support mobile phone size: 64-100mm11. Tripod opening height: 1078mm max

Read more less

1. Dual decoding supports music in MP3/WMA/WAV/FLAC/APE lossless decoding format2. Support bluetooth call function, power off memory function3. Support MMC/SD/MMA and other cards, support USB interface (U disk)4. Support external audio source input LINE IN5. Support radio FM, search frequency band (87.5MHZ-108.0MHZ)6. Mobile phone Bluetooth connection matching fast, low-power decoding scheme7. Application areas: speakers, tricycles, vans, buses, trolley speakers, power amplifiers, etc.8. Bluetooth transmission distance: within 20 meters9. Radio channel: 87.5Mhz-108Mhz10. Voltage input: DC 5V11. Amplifier: 2 x 3W12. Function: Bluetooth 5.0+lossless decoding+call+radio FM+AUX+USB+TF card13. Speaker: 4 ohms, 3W14. Buttons: three-button control, VOL-/AUTO/VOL+15. Dimensions: 71 x 22mm

Read more less

1.Comfortable and breathable PU leather: Made of sponge and PU leather, there are ventilation holes on the surface to relieve skin pressure.2. Easy to replace, easy to clean, can prevent the accumulation of bacteria and dirt3. Provides excellent comfort and fits your face like an eye pillow. Soft foam relieves pressure points, provides nose support and enhanced vision while maintaining comfort and enhancing your VR experience4. Compatible models: for HTC VIVE5. Size: 22 x 10 cm

Read more less

1. Material: polyester2. Dust-proof and non-slip, breathable and sweat-absorbing3. Easy to clean and reusable4. Eco-friendly fabrics, clean and hygienic5. No nose stuck, comfortable to wear6. Elastic strap, easy to put on and take off7. The wiring is fine and smooth, and the seams are firm and beautiful8. Soft and skin-friendly, delicate touch, not easy to wrinkle9. Strong elasticity, not easy to deform, not pick face shape, not tight10. Suitable for family gatherings, VR business users, VR experience stores and other occasions11. Gross weight: 28g

Read more less

1. Rated voltage: 250V~ 2. Rated current: 13A 3. Light weight, easy to carry and daily use. 4. Made of durable PC, making the product more sturdy and flame retardant. 5. Scope of application: suitable for all kinds of mobile phones, tablet computers, digital cameras, notebook computers, home desktop computers, and other digital products. 6. There is a dust cap in the jack to effectively protect the internal circuit and prolong the service life.

Read more less

1. Processor: 4 cores 2. System requirements: Android 3. Hard disk capacity: FLASH flash memory 4. Output resolution: 1080P 5. Support memory cards: CF, SD card, MINISD, U disk 6. Interface: HDMI 7. Audio playback format: MP3, WMA, WAV, OGG 8. Support video formats: ASF, AVI, VOB, MPEG, etc. 9. Support 2.4G/5GWiFi 10. Bluetooth connection is simple and fast, supporting external Bluetooth speakers, Bluetooth headsets, mobile TVs, and Bluetooth game controllers. 11. Using the latest Android 10.0 system, which is more stable than the Android 7.1 operating system. 12. Support 4k high definition. 13. Brand new upgrade, new definition, screen mirroring to mobile phone. 14. Load faster. 15. Easy to install and use: All video interfaces are available, easy to install and can be used by new and old TVS. 16. 5G dual-band Wifi: faster. 17. Using 2.4G/5G dual-band, it has strong wall-mounting capability, wider coverage and faster loading speed. 18. Support Chinese (Simplified), Chinese (Traditional), English, German, Greek, Spanish, Dutch, Vietnamese, Portuguese, Thai, French, Korean, Japanese, Arabic, Turkish 19. Packaging: Power supply x1 HDMI compatible cable x1 TV box x1 Remote control x1

Read more less

1. Rated voltage: DC 5V2. Rated power: 10W3. Rated current: 2A4. The way of placing the disc: cassette type5. Speaker interface: 3.5mm audio cable interface6. Material: ABS7. It can receive Bluetooth, connect to mobile phone, and connect to AUX audio.8. USB playback, remote control, fast and convenient.9. Bluetooth mode, high-definition sound quality is immersive.10. The dust protection cover design protects the movement and prevents damage to the disc.11. Do not connect to TV.

Read more less

1. Rated voltage: DC 5V2. Rated power: 10W3. Rated current: 2A4. The way of placing the disc: cassette type5. Speaker interface: 3.5mm audio cable interface6. Material: ABS7. It can receive Bluetooth, connect to mobile phone, and connect to AUX audio.8. USB playback, remote control, fast and convenient.9. Bluetooth mode, high-definition sound quality is immersive.10. The dust protection cover design protects the movement and prevents damage to the disc.11. Do not connect to TV.

Read more less

1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 315MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19g

Read more less

1. Mainly adopted plastic material, sturdy and durable to use.2. Good flexibility and nice workmanship.3. Narrow nozzle: greater picking force.4. Flat head suction, this design is effective to clean dust in small corner that is usually difficult for people to reach. Very useful.5. Convenient cleaning brush accessories effortlessly reach under radiator, refrigerator, sunshade accessories and furniture.6. Effectively clean dust from corners, such as computers, keyboards, air conditioners, shelves, beds, sofas, tables, etc.7. Size: 580 x 30 x 16mm

Read more less

1. Block dust and reduce dust damage to sensitive parts of the machine2. Filter the tiny dust and bacteria generated in the cleaning process to reduce secondary pollution to the air3. The effective particle filtering effect of the Hypa filter can filter particles such as cigarette smoke particles, pollen, dust and other particles4. Applicable model: for Holmes Aer1 HAPF30AT5. Specifications: 1x filter + 1x filter cotton6. Function: auxiliary filter7. Carbon cotton size: 245x106x3mm8. Filter size: 255x125x35mm9. Weight: about 10g of carbon cotton

Read more less

1. Strips is made of premium fluff material for durable and practical use.2. Strips for Dyson V7 V8 V10 V11 vacuum cleaner soft roller head.3. Delicate and exquisite, highly match the original equipment.4. As part of standard maintenance, it can be easily accessed and replaced.5. It is recommended to replace the spare parts every 2 to 3 months, depending on the frequency of use, so as to maintain the best performance of the machine.6. Strip Length: 23cm, 11.5cm, 11.5cm

Read more less

1. Block dust and reduce dust damage to sensitive parts of the machine2. Filter the tiny dust and bacteria generated in the cleaning process to reduce secondary pollution to the air3. The effective particle filtering effect of the Hypa filter can filter particles such as cigarette smoke particles, pollen, dust and other particles4. Applicable models: suitable for Philips FC8515 / FC8516 / FC8517 / FC8518 / FC8470 / FC8471 / FC8472 / FC8473 / FC8630 / FC8631 / FC8632 / FC8635 and other models, please check the size, the same size can be used5. Filter size: 127x147mm6. Filter cotton size: 113x133mm

Read more less

1. Based on Qualcomm platform, support 5G NSA and SA networking, support multi-mode & multi-band2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS3. Operating system support: Windows/Linux/Android4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas10. 2x SIM card slot, dual card single standby, switchable via AT command11. Onboard audio jack and audio decoder, allows audio operation like making phone call12. High efficiency power supply circuit, up to 3A output current

Read more less

1. This connector is a right-angle connector, which is designed to sit flush with the panel of the female port.2. It can be used to build entire custom cables for TV, Computer screens, etc.3. It can either be used as a replacement part or modification for an existing cable4. Interface: Vertical Mini HDMI plug5. Usage: For DIY HDMI cable6. Dimension: 12 x 16 x 17.5mm

Read more less

1. Made of high quality materials, durable2. Designed for curly hair, it can help lengthen hair when it is dry or make a shape you like3. Easy to install and remove, compatible with Dyson hair dryer4. Let your hair dryer turn curly hair into dry, curly and straight hair in seconds5. A good finishing tool for creating a fashionable style. Hide the elegant hair under the longer hair to create a smooth and shiny makeup for you6. Size 167 x 58 x 58mm7. Weight: 70g

Read more less

1. Accurate match, use with confidence2. Wear-resistant and durable, not easy to damage3. Easy to install and easy to use4. The inner diameter of the hose is 32mm, and the outer diameter of the hose is 39mm5. Applicable models: for Midea QW12T-05F / QW12T-05E / QW12T-07K / QW12T-07C / QW12T-607 / QW12T-608 / QW12Z-04A / QW12T-06K / QW12T-06G / QW12Z-06E / QW12T -07A/VC35J-10AC/CS869/QZ865 etc.6. Material: EVA hose7. Length: 1.85 meters, including host connector and handle

Read more less

1. Anti-flying nozzle specializes in treating unfresh hair, attach longer hairs to the surface and arrange them neatly.2. Reduce most of the fried hair at one time, make hair look smooth and shiny.3. What is more intimate is that this nozzle does not need to wet the hair, it can be used when the hair is dry.4. It takes 5 minutes to get smooth and long straight hair, so that every strand of my hair will be compliant without frying, and people will look refreshed and exquisite;5. And it can be used in the state of dry hair, you can use it without washing your hair in the morning, which is super convenient!6. Get rid of the frizz and get the styling, it is so easy all by yourself~7. Material: PA66+GF

Read more less