DIY Parts & Components

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 915MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low voltage detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler 21. SMA antenna IP5306 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 868MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low voltage detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler 21. SMA antenna IP5306 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 923MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. Low voltage detection and temperature sensor 18. Fast wake-up and frequency hopping 19. Highly configurable packet handler 20. Global Positioning System 21. GPS module NEO-6M, 3V-5V power supply universal 22. Designated module with ceramic antenna, super signal 23. Save configuration parameter data EEPROM Down 24. Battery with data backup 25. LED signal indicator 26. Default baud rate: 9600 27. Power: TP5400, 1A battery management 28. LED indicator 29. CP2104-GMR 30. Pre-flash firmware: SoftRF V4.0 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 923MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. Low voltage detection and temperature sensor 18. Fast wake-up and frequency hopping 19. Highly configurable packet handler 20. Global Positioning System 21. GPS module NEO-6M, 3V-5V power supply universal 22. Designated module with ceramic antenna, super signal 23. Save configuration parameter data EEPROM Down 24. Battery with data backup 25. LED signal indicator 26. Default baud rate: 9600 27. Power: TP5400, 1A battery management 28. LED indicator 29. CP2104-GMR 30. Pre-flash firmware: SoftRF V4.0 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 923MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. Low voltage detection and temperature sensor 18. Fast wake-up and frequency hopping 19. Highly configurable packet handler 20. Global Positioning System 21. GPS module NEO-6M, 3V-5V power supply universal 22. Designated module with ceramic antenna, super signal 23. Save configuration parameter data EEPROM Down 24. Battery with data backup 25. LED signal indicator 26. Default baud rate: 9600 27. Power: TP5400, 1A battery management 28. LED indicator 29. CP2104-GMR 30. Pre-flash firmware: SoftRF V4.0 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 923MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. Low voltage detection and temperature sensor 18. Fast wake-up and frequency hopping 19. Highly configurable packet handler 20. Global Positioning System 21. GPS module NEO-6M, 3V-5V power supply universal 22. Designated module with ceramic antenna, super signal 23. Save configuration parameter data EEPROM Down 24. Battery with data backup 25. LED signal indicator 26. Default baud rate: 9600 27. Power: TP5400, 1A battery management 28. LED indicator 29. CP2104-GMR 30. Pre-flash firmware: SoftRF V4.0 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)

Read more less

1. Espressif official ESP32-WROVER module 2. New ESP32 version: REV1 3. Wireless Internet 4. Bluetooth 5. 4MB flash memory 6. 8MB PSRAM 7. Lithium battery interface, 500mA maximum charging current 8. Support TF memory card 9. With 3D wires

Read more less

1. New version of ESP32: REV1 2. Wi-Fi/Bluetooth/4MB flash memory/4MB PSRAM/3D antenna/LORA Product description 1. Working voltage: 1.8~3.7v 2. Acceptable current: 10~14mA 3. Emission current: -120mA at +20dBm -90 mA at +17dBm -29mA at +13dBm 4. Working frequency: 868MHz version SX1276 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm at LoRa and 62.5Khz & SF = 12 and 146bps - 136dBm at LoRa and 125Khz&SF = 12 & 293bps - 118dBm at LoRa & 125Khz & SF = 6& 9380bps - 123dBm at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: - 1.2K~300Kbps at FSK - 0.018K~37.5Kbps in LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA in SLEEP - 1.5uA in IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low pressure detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler Global Positioning System 1. GPS module NEO-M8N, 3V-5V power supply universal 2. Designated module with ceramic antenna, super strong signal 3. Save configuration parameter data EEPROM Down 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 Power 1. TP5400 2. 2A battery management 3. LED indicator: There are 4 LEDs to display the battery status in real time. 4. Power button: Click once to start. Tap twice quickly to close. 5. USB 6. CP2104-GMR 7. Pre-flash firmware: SoftRF V4.0 Packing list: 1. TTGO T-Beam ESP32 2. 433MHz antenna 3. Pin x 1 4. Screw Washer x 3 Note: OLED is not included in the invoice

Read more less

1. New version of ESP32: REV1 2. Wi-Fi/Bluetooth/4MB flash memory/4MB PSRAM/3D antenna/LORA Product description 1. Working voltage: 1.8~3.7v 2. Acceptable current: 10~14mA 3. Emission current: -120mA at +20dBm -90 mA at +17dBm -29mA at +13dBm 4. Working frequency: 433HMz version SX1278 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm at LoRa and 62.5Khz & SF = 12 and 146bps - 136dBm at LoRa and 125Khz&SF = 12 & 293bps - 118dBm at LoRa & 125Khz & SF = 6& 9380bps - 123dBm at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: - 1.2K~300Kbps at FSK - 0.018K~37.5Kbps in LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA in SLEEP - 1.5uA in IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low pressure detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler Global Positioning System 1. GPS module NEO-M8N, 3V-5V power supply universal 2. Designated module with ceramic antenna, super strong signal 3. Save configuration parameter data EEPROM Down 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 Power 1. TP5400 2. 2A battery management 3. LED indicator: There are 4 LEDs to display the battery status in real time. 4. Power button: Click once to start. Tap twice quickly to close. 5. USB 6. CP2104-GMR 7. Pre-flash firmware: SoftRF V4.0 Packing list: 1. TTGO T-Beam ESP32 2. 433MHz antenna 3. Pin x 1 4. Screw Washer x 3 Note: OLED is not included in the invoice

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI 3404 power management chip 2. Flash: 4MB 3. PSRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: robot, rest 6. External device: TF card slot, C-type interface, PA2369NL 1825-S transformer, HR861153C Ethernet-POE interface 7. USB to TTL: CP 2104 8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC 9. Satellite clock: 32.768 MHz crystal oscillator 10. Operating temperature range: -40 degrees Celsius to +85 degrees Celsius 11. Size: 70x52.3x17mm 12. Weight: 26.85g Power Specifications 1. Power input: -C type USB 5V 2. HR861153C Ethernet-POE interface: 50V 3. Working voltage: 2.7V-3.6V 4. Output current: about 1.2A 5. Charging current: 500 mA 6. USB: Type C USB Wi-Fi 1. Standard: FCC/CE-Red/IC/TELEC/KCC/SRRC/NCC (ESP 32 chip) 2. Protocol: 802.11 b/g/n (802.11n, acceleration 150 Mbps) A-MPDU and A-MSDU aggregation, support 0.4??S guard interval 3. Frequency range: 2.4GHz~2.5GHz (2400 m~2483.5M) 4. Transmit power: 22 dBm 5. Communication distance: 300 meters Bluetooth 1. Protocol: Complies with Bluetooth V4.2BR/EDR and BLE standards 2. Radio frequency: -97 dBm sensitivity nzif receiver class-1 class-2 class-3 emitter AFH 3. Audio: CVSD&SBC audio Software Specification 1. Wi-Fi mode: workstation/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA 2/WPA 2-Enterprise/WPS 3. Encryption type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development/sdk for user firmware development 6. Network protocol: IPv 4, IPv 6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User configuration: +instruction set, cloud server, Android/iOSapp 8. OS: FreeRTOS

Read more less

1. Low-power sleep mode design 2. One way alarm voltage output 3. It can detect the voltage of the battery in real time and make a low battery voltage alarm, suitable for battery-powered applications, and a wide voltage supply range from DC5V to DC16V 4. Eight-way alarm detection, users can set different content for each alarm SMS, The input port can be selected as NC or NO alarm mode 5. 6 groups of called numbers can be set. When the alarm input has a trigger signal, an alarm message will be sent to the alarm number, or an alarm will be called directly 6. Easy to use, supports iOS and Android apps, you can simply send text messages through the app to set up 7. Wide application fields: mainly home security, warehouses, remote unattended stations, remote monitoring of equipment parameters (such as oil pressure, air pressure, water pressure, voltage, etc.), product upgrades (voltage monitoring, overload monitoring, etc.), safety protection (Smoke, fire, water level monitoring, gas, etc.) Other unattended points 8. Size: 8 x 5.8 x 2.2cm

Read more less

1. Voltage: DC8-20V 2. Output:5V3A 3. Power:15W 4. Convert efficiency: up to 96% 5. Working temperature:-40C-80C 6. With Over-current, over-temperature and short circuit Protection

Read more less

1. Module properties: non-isolated buck (BUCK) 2. Rectifier: synchronous rectification 3. Input voltage: 7V-24V 4. Output voltage: 5V 5. Output Current: 4A (short time) 6. Conversion efficiency: 96% (the highest) 7. Switching frequency: 340KHz 8. Output ripple: 30mV (max) 9. Load regulation: ?± 0.5% 10. Voltage Regulation: ?± 2.5% 11. Operating temperature: -40 celsius to +85 celsius 12. The USB recognition module 13. Note Description: - modules indicated above IN-(enter negative), IN + (input positive), OUT-(negative output), OUT + (positive output) must be connected correctly, or may result in damage to the module. 14. the module short circuit protection the 5A current automatic protection 15. Sizes: 6x2.1x1.2cm

Read more less

1. Wireless Bluetooth + USB foot switch,USB Mode + Bluetooth Mode: Two connection ways,Use USB wire or Bluetooth connect your PC or mobile phone- Allows hands-free operate on iPad, androids tablet and computers with your foot for working, play game push to talk etc.... 2. Simulate keyboard shortcuts: It is two keys or a few keys custom function keyboards, which can customize a key, combination of keys, hotkeys or shortcut keys .(e.g. "Ctrl + Alt + P" or "Alt + A") 3. Application: sewing machines, electric sewing machines, Dispensing machine, machine tools, medical equipment, instruments, computers office and so on. 4. Easy and convenient: Not only can be used in your PC via USB cable or wireless Bluetooth, it also can be used for iPad, iPhone, tablet, smartphone with wireless Bluetooth. Foot Switch Configuration Software (download). 5. Ergonomic design: Their ergonomic design maximizes ease of use: a gentle tap on the respective pedal is that is required. It is sturdy with good weight and well made.

Read more less

1. Rated voltage: 250V2. Rated current: 10A3. Material: Plastic, metal4. Plug type: 3-pin5. Can be used in case, instrument, tableware, counter, daily household, etc. The inner core is pure copper, which can be detected with a magnet.6. Package contents: 1 x power socket with switch fuse

Read more less

1. 10 specifications, 20 for each, a total of 200. 2. Specifications: 3*4*2.5 / 3*4*2.5 / 3*6*4.3 /3*6*5 / 3*4*2 / 3*4*2 / 4*4*1.5 / 4*4* 0.8 / 3*6*2.5 / 6*6*3.1. 3. The products are widely used in the mainstream model remote control, LCD panel button switch.

Read more less

1. Material Iron + stainless steel 2. Features U:6-36VDC I:300mA Sn:8mm 3. Application Metal proximity sensor 4. Packing List 1 x Metal proximity sensor 5. Dimensions: 6.5 x 3.0 x 3.0cm 6. Weight: 95g

Read more less

1. Material: PA66 2. Rated voltage: 250V 3. Rated current: 20A 4. Stripping length: 12-13 mm 5. Stripping length range: 0.47 in 6. No danger of wire loosening and tape embrittlement, transparent and safe 7. With test holes, no need to remove the tape to measure the voltage 8. Direct insertion, wrong connection can be pulled out, repeated connection 9. Each contact shrapnel is independent, different wire diameter conductors are also available, safe short connection. 10. Permanent temperature resistance 105 Celsius degree, non-brittle 11. Maximum connectable 4mm/32A/400V Connection method: 1. Stripping insulating skin of single core and strand 9-11 mm 2. Move the orange pressure bar up with your thumb and open the spring box. 3. Insert the wire through the spring box opening. 4. Press down the orange pressure bar and the wire will be clamped automatically. Wire removal method: 1. The wire can be removed by moving the orange pressure bar upward with the thumb.

Read more less

1. Material: PA66 2. Rated voltage: 250V 3. Rated current: 20A 4. Stripping length: 12-13 mm 5. Stripping length range: 0.47 in 6. No danger of wire loosening and tape embrittlement, transparent and safe 7. With test holes, no need to remove the tape to measure the voltage 8. Direct insertion, wrong connection can be pulled out, repeated connection 9. Each contact shrapnel is independent, different wire diameter conductors are also available, safe short connection. 10. Permanent temperature resistance 105 Celsius degree, non-brittle 11. Maximum connectable 4mm/32A/400V Connection method: 1. Stripping insulating skin of single core and strand 9-11 mm 2. Move the orange pressure bar up with your thumb and open the spring box. 3. Insert the wire through the spring box opening. 4. Press down the orange pressure bar and the wire will be clamped automatically. Wire removal method: 1. The wire can be removed by moving the orange pressure bar upward with the thumb.

Read more less

1. Number of cores: 22. Size: 20.5x12.4x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Insulator material: PC9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 32. Size: 20.5x12.4x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 52. Size: 20.5x26.6x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single-stranded hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Interface type: push type2. Material: PC+Nylon3. Frequency: 50/60hz4. Rated current: 32A5. Rated voltage: 450V6. Number of holes: 37. Size: 39.8x26.2x14.5mm8. Rated power: 7000W9. Features: flame-retardant shell, copper conductive, easy installation, firm wiring10. Applicable wire: both soft and hard wire11. Wiring range; 0.08-4.0 square mm12. Application scope: lighting electronics, electrical appliances, power sockets

Read more less

1. Number of cores: 42. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in 773-1047. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-strand hard wire

Read more less

1. Number of cores: 22. Size: 19.5x9.2x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in7. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-strand hard wire

Read more less

1. Number of cores: 42. Size: 19.5x13.0x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: plug-in 773-1047. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 22. Size: 19.5x9.2x13.1mm3. Rated voltage: 400V4. Rated current: 32A5. Rated power: 4KW6. Interface type: Cage wiring7. Production process: Injection molding8. Application range: cable9. Contact material: tinned copper10. Insulator material: PC11. Applicable wire: 0.75-4 square millimeter single-strand hard wire12. Working frequency: low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Cage wiring7. Production process: Injection molding8. Application range: Cable9. Contact material: Tinned copper10. Insulator material: PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire12. Working frequency: Low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in 773-1067. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire12. Working frequency: low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 32A5. Rated power: 4KW6. Interface type: plug-in 773-1067. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PA6611. Applicable wire: 0.75-4 square millimeter single-strand hard wire12. Working frequency: Low frequency

Read more less

1. Number of cores: 32. Size: 25.6x20.1x11.2mm3. Rated voltage: 400V4. Rated current: 41A5. Rated power: 4KW6. Interface type: Plug-in7. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 2.5-6 square millimeter single-strand hard wire12. Working frequency: Low frequency

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less