DJI & GoPro Accessories

1. Upgrade the cage-free structure, you can freely install ND / CPL filters, Max lens and tempered film2. Increase the vertical shooting function, you can install the vertical shooting adapter, short video shooting easy to hold 3. Bottom configuration two-jaw adapter and 1/4 screw hole, optimize the structure, no disassembly4. Dual cold shoe interface, can be external fill light and microphone, etc.5. Metal rabbit cage inside to increase the sub-black film, effective protection of sports cameras are not scratched6. Rabbit cage design to avoid the battery and microphone holes, replace the battery without disassembly7. Compatible models: for GoPro Hero11 Black / HERO10 Black / HERO9 Black8. Material: aluminum alloy9. Size: 79 x 63 x 33mm10. Weight: 65g

Read more less

1. Compact shape, lower noise, after precision dynamic balance test, higher stiffness, for the aircraft to provide more powerful tensile force2. Stiffer and more powerful for the aircraft3. Packing list: Propeller X 2 pairs + screws x 124. Suitable for DJI Mini 2 / DJI Mini SE5. Size: 119.38 x 66.04 mm6. Weight: 0.6 g7. Tip:- please follow the instructions on the paddle bag to install the paddle on the correct arm;- use the same blades in the same package when replacing the blades. Do not mix the blades with those in other packages.

Read more less

1. Low noise, high thrust-to-weight ratio and accurate dynamic balance test provide strong pull force for the aircraft2. Diameter x pitch: 6.0 x 3.0 inches3. Suitable for DJI Mini 3 Pro4. Packing list: Propeller x 2 pair + screws x 125. Weight: 0.9 g6. Tip:- please follow the instructions on the paddle bag to install the paddle on the correct arm- use the same blades in the same package when replacing the blades. Do not mix the blades with those in other packages

Read more less

1. Time is correspondingly longer when two pieces are charged at the same time2. Charging current: 3A3. Charging voltage: USB 5V4. Charging interface: USB TYPE-C / USB-C5. Suitable for Insta360 One X36. Charging time: about 90 minutes7. Size: 3x4x6cm8. Note: Battery on display is not included

Read more less

1. The all-round handle is comfortable to hold. It integrates Wi-Fi, Bluetooth, wireless microphone receiver, and 1/4 screw port. It can be directly connected to the mobile phone APP to control shooting wirelessly.2. Support wireless microphone transmitter to record sound wirelessly3. You can also connect external headphones or microphones through the 3.5mm audio interface4. When watching a video, the built-in speaker can play the recorded live sound5. The 1/4 threaded port on the bottom can be connected to accessories such as tripods, which can be placed more stably on a horizontal surface6. When disassembling, please pull down the unlock switch first, and then pull out the handle vertically along the direction of the fuselage7. Highlights: wireless connection, improved grip, all-in-one design8. Wi-Fi: 2.400-2.4835 GHz, 5.725-5.850 GHz9. Bluetooth/GFSK: 2.400-2.4835 GHz10. Wi-Fi transmit power (EIRP) 2.4 GHz: ＜23 dBm (FCC), ＜19 dBm (CE/SRRC/MIC)11. Wi-Fi transmit power (EIRP) 5.8 GHz: ＜23 dBm (FCC/SRRC), ＜14 dBm (CE)12. Bluetooth: 4dBm13. GFSK: 13dBm (FCC/SRRC), 10dBm (CE/MIC)14. Dimensions: 50x28.6x22.8mm15. Weight: 36.3 grams

Read more less

1. Silicone lens cover, specially designed for Insta360 X3 body lens or lens guard protection; 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera lens or lens guard. 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. Modular disassembly and assembly, lightweight design2. Using ultra-thin coaxial cable, the leaking part is wrapped by TPU sheath to improve bending resistance and wear resistance3. The coaxial cable is assembled with the camera back cover, which can be quickly installed on the for DJI FPV air unit4. Reminder: Please refer to the instruction manual for the disassembly method5. Compatible products: suitable for DJI FPV air unit6. Length: 100 mm (without terminals, end cards and back cover)

Read more less

1. LHCP antenna, strong anti-interference ability, SMA connector2. Long-distance transmission, small size, light weight, and drop resistance3. VSWR less than 2 Corresponding frequency bands: 5.4 GHz - 6 GHz, 5.8 GHz4. Measured axial ratio: 3 dB5. Measured gain: 2.75 dB6. Compatible products: suitable for DJI FPV air system7. Size: 12.7x12.7x55mm8. Weight: 6gKind tips1. The SMA head of this product is an internal threaded inner hole.2. When installing the air terminal antenna, it is necessary to separate the two antennas as much as possible, and the cylindrical parts of the two antenna ends should be separated by at least 40 mm to achieve the communication effect; at the same time, try to keep away from metal and carbon fiber structural objects, and ensure that the antenna is not blocked during flight

Read more less

1. Specially designed for DJI Mini 3 Pro, precise mold opening, small size and large capacity, can accommodate remote control with screen + charger + 2 batteries + aircraft + other small accessories (accessories not included) 2. High-quality PU leather fabric, beautiful appearance and upgraded taste 3. Two-way zipper, smooth and not stuck 4. The unique handle is easy to carry and can also be directly stored in the backpack 5. Using nylon fabric webbing, easy to adjust the length, light and wear-resistant 6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance 7. Dimensions: 30 x 23.5 x 8.2cm 8. Weight:556.5g

Read more less

1. Compatible models: suitable for Insta360 X3 / ONE X22. It does not take up much space and only weighs 7g, making the microphone and camera fit closely.3. All aluminum alloy material, strong and durable.4. Combined with the charging audio adapter, it can realize the sound collection effect of the microphone in the panoramic mode.5. Note: This product does not include the selfie stick and microphone.

Read more less

1. Portable size, large capacity, and accessories can basically be placed2. Lycra + EVA hot-pressed inner support, real machine mold opening, smooth and does not hurt the fuselage3. Comfortable hand-feeling leather ball pattern PU, beautiful and beautiful water-repellent fabric, not afraid of traveling in light rainy days4. Thick and bold hanging buckle, no rust or paint, strong and durable5. The plated metal slider is beautiful and elegant, and the double slider design is convenient to use6. Applicable models: suitable for DJI MINI 3/MINI 3 PRO (two remote control versions are optional)7. Material: Shell PU+EVA, Liner Lycra+EVA8. Dimensions: about 26.7 x 26.7 x 10.2cm9. Weight: about 675g10. Storage bag only, excluding display items

Read more less

1. Specially designed for the Mavic 3 Pro series, it can accommodate the flying kit and master kit, such as: aircraft + RC PRO remote control + RC remote control + 4 pieces of flight batteries + charger + filter + charging butler + propellers + data line etc. 2. ABS material, hard shell design, wear-resistant and drop-resistant 3. Highly tight and waterproof, can withstand repeated watering tests 4. High-density sponge, good softness, easy to store accessories 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure 6. Size: 41.8 x 34.5 x 18.6cm

Read more less

1. CNC technology, all-metal aluminum alloy material: the overall parts are made of aluminum alloy material, with high strength, high hardness and firm structure, not easy to loose, durable and more secure2. Shooting while riding, free control: When taking pictures outdoors, you can fix the remote control through the bicycle bracket and control the remote control while riding3. Reverse lock adjustment piece, human body gesture wrench, silicone non-slip pad4. Universal adjustment of the pea clip: the multi-angle of the pea clip is flexible and changeable, and can be adjusted according to your needs5. Compatible with horizontal/slash bars: the body pea clip is universally adjustable, and the angle is flexible, not only suitable for bicycle horizontal bars, but also for slash bars6. The remote control connector is free from disassembly design. After use, just remove the bicycle bracket, and the remote control connector can be removed7. Outdoor follow-up shooting, intelligent follow-up: Fix the remote controller with screen through the bicycle bracket to realize shooting while riding outdoors8. Note: The product only includes the bracket, no other items are included9. Applicable models: suitable for DJI Mini 3 Pro10. Material: aluminum alloy11. Size: 13.2x15.1x4cm12. Net weight: 145.3g13. Gross weight: 164.5gInstallation steps:1. Tighten the remote control connector on the bicycle bracket by rotating clockwise2. Use a screwdriver to turn the screw to secure the bike to the remote3. Remove the knob and clamping block in turn4. Install and fix the clamping block first5. After tightening the knob6. The installation is complete

Read more less

1. Premium POM+EVA + ABS+polyester fabric+alloy waist strap mount, comfortable and durable.2. Convenient to attach your camera to your waist for convenient to use.3. Easy to wear and take off, portable to use.4. Can be worn around the waist, hands free while doing outdoor sports.5. Perfect for running, climbing, hiking, cycling and other sports.6. Waist strap length: 135cm, width: 49cm, suitable for 75-110cm waistline7. Selfie stick length: Up to 155cm (only for with Selfie stick type)

Read more less

1. Premium POM+EVA + ABS+polyester fabric+alloy waist strap mount, comfortable and durable.2. Convenient to attach your camera to your waist for convenient to use.3. Easy to wear and take off, portable to use.4. Can be worn around the waist, hands free while doing outdoor sports.5. Perfect for running, climbing, hiking, cycling and other sports.6. Waist strap length: 135cm, width: 49cm, suitable for 75-110cm waistline7. Selfie stick length: Up to 155cm (only for with Selfie stick type)

Read more less

1. Lightweight design will not bring excessive load to the aircraft2. Quick installation, convenient and practical, the frame is light and stable. The overall weight is only 25.5g, which can stably carry the body and be easily carried by the body without affecting battery life.3. Safer landing for Mavic 3 Pro aircraft4. Reduce the impact when landing and protect the gimbal camera5. Material: ABS6. Dimensions: 5.5 x 5.2 x 2.9cm (front stand); 7.7 x 5.6 x 1.95cm (rear stand)Packing list:1. Front left foot stand x 12. Left rear tripod x 13. Right front tripod x 14. Right rear tripod x 1

Read more less

1. When riding in the wild and taking photos, you can fix the RC 2 remote controller on the handlebar and control the remote controller while riding.2. CNC precision-machined aluminum alloy remote control bracket has high strength and hardness, making it durable and more secure.3. Without connecting the aluminum alloy remote control bracket, it can also be used as a separate sports camera riding clip to hold the sports camera.4. Applicable models: Applicable for DJI RC 25. Material: aluminum alloy + plastic

Read more less

1. The shell adopts high quality PC, stainless steel and optical glass material, professional design and manufacturing.2. Equipped with one touch screen back cover to protect your camera back screen. (Only for "With Touch Back Cover" )3. One buckle basic mount and one long screw are attached to this item.4. Durable and usable, anti-surf pressure will not damage its photographic effect.5. 60 meters waterproof design, ideal for diving, snorkeling, swimming and other water sport activities.

Read more less

1. The material is aviation aluminum alloy, the handle is made of high-quality PC, it is sturdy and durable, and the load-bearing capacity is 3KG. 2. It is a 360-degree rotating handle with a 1/4 screw on the top, and can also be used as a desktop tripod. 3. The handle tripod can be magnetically absorbed to keep it stable and not loose. 4. Use a selfie stick, adjust the camera to bullet time mode, and shake it horizontally at a constant speed to easily shoot cool bullet time movies. 5. Warm reminder: This product is a bullet time controller link and does not include a selfie stick and other accessories.

Read more less

1. Propellers specially made for DJI Mini 3 produce less noise and have undergone precise dynamic balancing tests to enhance aerodynamic efficiency and powerful thrust.2. Tips：Follow the instructions and attach propellers to the correct frame arms.When changing propellers, use the propellers in the same package. Do not mix propellers from different packages.Specifications:1. Diameter × Thread Pitch: 6.0 × 3.0 inches2. Weight (each): 0.9 grams3. Compatibility: DJI Mini 3In The Box:Propellers (pair) × 2Screws × 12

Read more less

1. Suitable for Insta360 X3 panoramic camera fully invisible waterproof housing lens protection; 2. Made of flexible and soft silicone, thick and durable, with a certain degree of elasticity, it fits well and protects the lens; 3. The surface is spray-coated, beautiful and elegant, comfortable to touch and easy to clean; 4. It helps prevent dust, smudges and scratches on camera lenses or protective lenses; 5. Simple and convenient installation and disassembly;

Read more less

1. A variety of exquisite and cool patterns are available.2. Outdoor ink, long-lasting and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated application.4. There is an air guide groove on the back, which makes it easier to deal with air bubbles and makes it easier to fit.5. Note: The product only has stickers and does not contain other items

Read more less

1. Suitable for Insta360 X3 panoramic camera fully invisible waterproof housing lens protection; 2. Made of flexible and soft silicone, thick and durable, with a certain degree of elasticity, it fits well and protects the lens; 3. The surface is spray-coated, beautiful and elegant, comfortable to touch and easy to clean; 4. It helps prevent dust, smudges and scratches on camera lenses or protective lenses; 5. Simple and convenient installation and disassembly;

Read more less

1. Can store the drone body, remote control and 3 batteries (1 of them is on the drone body)2. Resistant to external pressure, using EVA material, pressure-resistant, anti-slip and wear-resistant3. Double zipper design, easy to use, smooth and not jammed.4. Wider carrying strap design, sturdy and solid5. Suitable for DJI Mini 3 / Mini 3 Pro6. Material: EVA7. Weight: about 260g8. Size: about 24 x 19 x 9cm9. Note: drone and other accessories in the picture are for display only, shipping does not include

Read more less

1. The double-sided multi-layer nano-coating process is used to give the lens high-quality waterproof, oil-proof, stain-proof and scratch-proof properties. Provide more safety for your drone.2. Using professional optical glass lenses, the image is clearer3. The frame is made of high-quality materials, is light weight, strong and corrosion-resistant, does not affect the normal flight of the drone, and can better protect the lens.4. It can be adjusted by adjusting the scale to prevent overexposure in strong light environments, resist scattered light, increase color saturation, make the picture more transparent and beautiful, and achieve blockbuster effects such as foggy water, night light trails, etc.5. Buckle-type fixation, easy to disassemble and assemble6. Suitable for DJI Mini 4 Pro drone?

Read more less

1. Suitable for a variety of drones: any drone that can carry a load of more than 100g can be carried2. 2.4G remote control, one-click placement, simple operation3. Scientific and lightweight design, does not affect flight speed4. Built-in 350 mAh/3.7V battery, USB charging port5. Installation with hook and loop fastener straps does not damage the fuselage and is convenient and quick6. Loading weight: up to 750g7. Usage time: about 12 hours8. Charging time: about 90 minutes9. Product size: 55 x 54 x 26mm

Read more less

1. 37W high power input, intelligent temperature control charging algorithm, adjust charging power according to temperature, faster and safer2. LED lighting, 1-5 levels of brightness can be switched cyclically, and can be used in multiple scenes and for multiple purposes, meeting the needs of outdoor adventure and night flights. (Press and hold the light button for more than 2S to turn on the LED light. The default brightness mode is the second level. The fifth level is the strobe mode. Press and hold the light button for more than 2S to turn off the LED light.)3. SOS reminder: Using dynamic SOS intelligent algorithm, as the battery power decreases, the interval between calls for help is lengthened, ensuring longer calls for help.4. Intelligent detection of battery power, the battery will be charged in order from high to low power. (Only when charging the intelligent flight battery)5. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections6. LED indicator light to check battery power more accurately7. One-key storage function: Press and hold the function button for more than 2 seconds while charging to turn on the 60% storage mode. Convenient for travel, air transportation, and storage when not in use for a long time.8. Suitable for DJI Mini 4 Pro / Mini 3 series batteries, and supports PD fast charging protocol. The USB-A port can also quickly charge other digital devices.Parameter:1. Input (USB-C): 5V 3A/9V 3A/12V 3A2. Charging power: 37W (Max)3. Output (USB-A): 5V 2A, 10W (Max)4. Charging method: charge three batteries in sequence5. Compatible battery: Suitable for DJI Mini 3 series smart flight batteries, DJI Mini 4 Pro smart flight batteries, DJI Mini 4 Pro/Mini 3 series long-life smart flight batteries6. Adaptation charger: It is recommended to use 30W/65W PD protocol charger7. LED lighting function: supported8. Call for help reminder function: supported9. One-click storage mode: supported10. Battery display: supported11. Working environment temperature: 5-40 degrees Celsius12. Dimensions: 100 x 54 x 55mm

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V 2A, or power adapter above 2A)3. Output: 4.35V 2.5A4. Charging time: about 35-75min5. Material: ABS6. Weight: about 58g7. Size: about 7.2 x 5.9 x 4cm8. Description: only the charging box, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, can identify high and low battery, prioritize to fill the high power battery3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. With charging indicator7. Lightweight and portable, can be easily put into the pocket8. Multi-protection, over-current/over-voltage/over-temperature/short-circuit/static protection

Read more less

1. Specially designed for small drones with cameras, suitable for DJI Mavic Pro/ Platinum / Mavic Air / Mavic 2 Pro/Zoom, DJI Air 2S, DJI Avata, DJI Mini 2/SE/MINI 3 Pro, Mavic Air 2. DJI Spark/Tello, Xiaomi FIMI drone, GoPro Karma, Parrot Anafi drone, etc.2. The unfolded size is 50cm/65cm and can be folded for easy portability.3. Made of waterproof PU leather material with anti-fouling function, making the landing pad easy to clean.4. High-precision printing, outdoor ink, waterproof and sun-proof, not easy to fade, double-sided and two-color design, suitable for a variety of environments, highlighting the take-off and landing positions5. Material: PU6. Weight: 50cm/450g, 65cm/739g

Read more less

1. Material: Shell EVA + nylon2. Suitable for DJI Mini 4 Pro (compatible with RC 2 and RC-N2 remote controls)3. Real machine mold opening, high adaptability4. Shoulder strap card slot design, can place bus cards and other items5. The metal buckle of the shoulder strap is durable and not easy to be damaged.6. Water-repellent fabric, wear-resistant material7. Durable and long service life8. Weight: about 650 grams9. Dimensions: 31 x 20.5 x 11.5 cm10. Note: only storage bag, no other items included

Read more less

1. Made of aviation aluminum material, high hardness, durable and light weight 2. Extensive helmet base compatibility, including NVG tactical helmet base, FAST helmet cuttlefish base, AF helmet cuttlefish base, M88 helmet bracket base, MICH helmet bracket base, Wendy helmet cuttlefish base, etc. 3. Widely applicable to various action cameras such as for GoPro Hero12 Black / Hero11 /10 /9 /8 /7 /6 /5, Insta360 Ace / Ace Pro, DJI Osmo Action 4, etc. 4. One-click quick installation, press to fix and remove; 5. The dried cuttlefish blocks are directly connected to the camera to provide real-time vision of the battlefield; 6. Warm reminder: The camera shown in the picture is only used as a scene display and does not include the camera.

Read more less

1. The motorcycle helmet chin clamp mount can be reused and supports multiple angle adjustments to help you capture wonderful moments.2. Clip-on bracket makes installation more convenient, does not damage the helmet paint, and does not affect the closing of the helmet lens.3. Quick disassembly/assembly design, easy to use4. Anti-slip mat + anti-slip particles + safety rope, stable and secure and not easy to fall5. Safe and stable, the maximum carrying capacity is greater than or equal to 5kg6. Helmet thickness range: 18-35mm7. Set 2 comes with a mobile phone clip, which can hold mobile phones with a width of 55-105mm.

Read more less

Suction Cup Mount1. Made of high quality ABS plastic, rubber and aluminum alloy, durable and sturdy. 2. Light weight and small size, it is convenient to carry and use. 3. Connecting rod with the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. 4. The suction mount is designed for a quick, secure way to mount your action camera to your desired area! 5. Simple and practical car mount suction cup, specially designed to attach your cameras on your car dashboard or windshield, for convenient to operateSelfie Stick1. The material is aluminum alloy, thickened tube body design, strong bearing capacity; 2. The main body is a 5-section telescopic rod, the height after contraction is 28cm, and the maximum height after extension is 112cm; 3. The whole tube body adopts anodizing process, rubber anti-skid and anti-skid handle design, anti-skid and sweat-proof, taking into account the quality and appearance, and feels comfortable to hold; 4. The base has a 1/4 screw hole, which can be connected to a triangular clip or an extension rod, and the top is a 1/4 screw, which can be connected to a camera, mobile phone clip or adapter, etc.; 5. With a panoramic camera such as Insta360, you can easily take a 360-degree panoramic blockbuster and freeze the beautiful moment at any time;

Read more less

1. Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones.2. Input: 5-20 V, max 3 A3. Input (Power Accumulation): Max 65 W4. Output (Charging): Max 17 V5. Output (USB): 5 V, 2 A6. Charging Method: Three batteries charged in sequence7. Recommended chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers8. Compatibility:DJI Avata 2In The Box:DJI Avata 2 Two-Way Charging Hub × 1

Read more less

1. Engineered for DJI O4 video transmission with an integrated antenna design, it is lighter than its predecessor and boasts a longer operating time. The control sticks are extended by 2 mm, catering to single and dual-fingered control.2. In addition to Normal and Sport modes, the DJI FPV Remote Controller 3 offers Manual mode, better suited for advanced players to practice and master more sophisticated skills.Tips1. For a tailored control stick feel, it is recommended to use the included screwdriver for adjustments. For more details, check the manual or tutorial videos.2. DJI FPV Remote Controller 3 is compatible with a variety of simulators including Liftoff, Uncrashed, DCL, and The Drone Racing League.Specification:1. Weight: Approx. 240 g2. Dimensions: 165×119×62 mm (L×W×H)3. Operating Time: Approx. 10 hours4. Charging Time: Approx. 2 hoursCompatibility:DJI Avata 2DJI Goggles 3In The Box:DJI FPV Remote Controller 3 × 1DJI FPV Remote Controller 3 Control Sticks (Pair) × 1L-shaped Screwdriver × 1

Read more less

1. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying.2. With the DJI 30W USB-C Charger, three Intelligent Flight Batteries can be fully charged in just three hours, and three Intelligent Flight Batteries Plus can be fully charged in just four hours.Specifications:1. Model: CHX162-302. Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargers3. Input: 5 V, 3 A/9 V, 3 A/12 V, 3 A4. Output (USB): 5 V, 2 A5. Operating Temperature Range: 5- 40 degrees celsius (41-104 Fahrenheit)6. Charging Time: Three Intelligent Flight Batteries can be fully charged in about three hours.Compatibility:DJI Mini 4 ProDJI Mini 3 ProDJI Mini 3Packing list:Two-way Charging Hub × 1

Read more less

1. Large capacity, huge capacity. It can store the head, double-layer quick-release plate, battery handle, portable adapter handle and tripod, as well as lens fixing bracket, data cable, screw set and other accessories.2. Professional waterproofing, the safety box is tightly closed and sealed, which can effectively prevent water leakage when splashing or sprinkling water.3. High strength, impact resistance, corrosion resistance and high and low temperature resistance. Made of super impact-resistant hard material, it is anti-fall, resistant to smashing, not easily deformed, and has strong load-bearing capacity.4. High-quality EVA shock-proof inner support, precise mold opening, tight storage and protection of your equipment.5. Comfortable soft rubber handle, comfortable in hand, non-slip and wear-resistant, relieving hand pressure.6. Product size: 35.4x29.4x13.7cm7. Net weight: 1.59kg

Read more less

1. Designed for Insta360 X4, adapted to your device, so you can easily enjoy the fun of horizontal shooting 2. Mount the X4 horizontally, and easily shoot horizontally at various angles, so that you can be more skillful in shooting. 3. Unique variable interface design, support 1/4 inch screw port and two-jaw interface, to adapt to the needs of various equipment, easy to adapt to a variety of models. 4. The bracket is simple, lightweight and durable, and remains stable even after a long time of use. 5. Whether you are shooting outdoors or indoors, the X4 horizontal bracket can provide you with stable support and make your work more outstanding.

Read more less

1. Suitable for Insta360 X4 silicone protective case, fully protects the camera and prevents scratches and bumps2. Compatible with lens protector: The opening of the lens is wide, a silicone cover of the body is installed, and the lens protector can also be disassembled and installed normally.3. Installing/removing the camera is comfortable and convenient. There is no need to remove the protective cover. The battery and USB protective cover can be directly removed and installed.4. Cooling holes on the back ensure heat dissipation5. The hole position is accurate, with reserved indicator lights/front, rear, left, and right sound pickup, and speaker hole position, which does not affect the normal use of the camera.6. The bottom of the protective case is designed to be flush with the camera. After the protective case is installed, the camera can also be placed upright, further protecting the camera body from scratches.7. The protective cover is scientifically designed to retain the original optical path of the camera lens, making the camera image without obvious black edges.8. The surface lubrication process of the protective cover is skin-friendly and delicate, improving the hand experience.9. The protective cover is designed with details such as button protrusions, button outlines, microphone outlines, speaker outlines, and button function graphics, highlighting quality everywhere.Specification:1. Material: silicone2. Dimensions: body case 124.8 x 49.2 x 28.7mm, lens case 52.8 x 48.3 x 59.3mm3. Weight: body case 14g, lens case 34.3g

Read more less

1. Made of PC material, pressure-resistant and corrosion-resistant. 2. Designed to fit the lens, effectively protecting your camera lens and preventing scratches. 3. The lens material has a light transmittance of over 95%, preserving image quality to a great extent. 4. Reasonable design, easy and convenient installation and disassembly. 5. Applicable models: Suitable for Insta360 X4.

Read more less

1. Input connector: Type-C2. Input: 5V 3A3. Output: 4.35V 1A4. Charging time: about 2.5h5. Material: ABS6. Weight: about 84.3g7. Size: about 78.5 x 56.9 x 39mm8. Description: only the charger base, not include other items in the pictureFeatures:1. Individually powered triple charging slots for charging three batteries at the same time2. When the battery is low, the charging cradle charges the battery with maximum power; when the battery enters a high state, the charging cradle gradually reduces the charging power; when the battery is fully charged, the charging cradle stops battery charging immediately3. Holds three Micro SD cards4. With charging indicator5. Multi-protection, over-current/over-voltage/over-temperature/short-circuit/electrostatic protection

Read more less

1. Suitable for Insta360 X4 panoramic camera charger, can charge 2 batteries at a time2. Material: ABS+UV silver powder process3. Charging interface: USB Type C4. Charging time: 90 minutes, charging specification meets 12V 3A5. Working environment temperature: 0 degrees -40 degrees (when it is lower than 10 degrees, the charging speed will slow down)6. Input: 12V/1.5A 9V/2A 5V/3A7. Output: 4.4V/1.5A x 28. Product size: 7.8 x 4.5 x 5.6cm9. Weight: 65G

Read more less

1. Made of high-quality materials and durable;2. The microphone can be expanded to record anytime and anywhere;3. Reserve a hole at the bottom to connect a 1/4 selfie stick, tripod, etc.;4. Small, lightweight and easy to carry.5. Main material: aluminum alloy6. Net weight: 12.7gPacking list: Microphone extension ×1, adapter cable ×1

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V2A, or 2A or more PD power adapter)3. Output: 4.35V 2.5A4. Charging time: about 80min5. Material: ABS6. Weight: about 84g7. Size: about 13.52 x 5.62 x 2.52cm8. Description: only the charging case, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, can identify high and low battery, prioritize to fill the high power battery3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. Two-color injection molding process, the shell of the inner layer of hard rubber, the outer layer of soft rubber, one-piece molding, soft and hard to hold in the hand, good texture7. Lightweight and portable, can be easily put into the pocket8. Multi-protection, over-current/over-voltage/over-charging/short-circuit/overload/fire protection9. With charging indicator

Read more less

1. Variable interface, bottom 1/4 threaded port + folding for GoPro interface 2 in 1, adapt to more accessories 2. Built-in non-slip rubber pad, no damage to the camera, more stable 3. Aluminum alloy material, lightweight and durable 4. Horizontal mounting, unlocking more ways to play and view 5. Material: Aluminum alloy, silicone

Read more less

1. Aluminum alloy material, strong and durable2. Thin and lightweight design, compact and portable3. MagSafe magnetic design, instant adsorption, with a tail magnet, accurate positioning4. Built-in powerful magnet, strong magnetic force, tightly adsorption of the phone and Flow5. With magnetizing ring, can be used on cell phones without MagSafe interface6. Material: aluminum alloy7. Size: about 78 x 57 x 4.2mm8. Weight: approx. 30g9. Description: only the adapter, no other items in the picture are included

Read more less

1. The anti-collision ring specially designed for DJI AVATA 2 drone propeller protector is precisely molded, fits well, and has a solid design, providing cushioning and protection for the AVATA 2 propeller protector.2. The anti-collision ring is installed on the Avata 2 propeller protector. It uses TPU material to absorb impact and has a fortress-style all-inclusive design to protect the Avata drone from accidental collision with trees, walls or any other obstacles.3. The TPU protective cover requires no tools to install and can be stuck on the propeller protective cover. It is easy to install and remove, will not scratch the drone body, and does not affect the installation of the gimbal protective cover and STARTRC bumper. It is compact in size. Easy to store.4. Made of high-quality lightweight materials, high strength, good toughness, light weight, and lightweight design will not add extra burden to the flight of AVATA 2, and it will not shake or fall off during flight.5. Size: 96.7x51x19mm6. Weight: 48.9g

Read more less

1. Specifically designed for Insta360 X4 camera, with precise mold opening, it can match and store X4 camera (with lens protective case). The mesh bag design can store data cables, SD cards and other small accessories; 2. High-quality PU leather fabric with Lycra and short velvet inside to fully protect the X4 camera from bumps and scratches; 3. Two-way zipper, smooth and non-stuck; 4. A hand strap is provided, which is light and wear-resistant, easy to carry, and can also be stored directly in a backpack. 5. Size: 150x92x65mm 6. Weight: 121g

Read more less