Test Equipment

1. One machine with dual use, can test electric and magnetic field radiation at the same time 2. Sound and light alarm, when the detection result exceeds the safe value, the instrument will automatically alarm 3. Data lock, one-key lock of radiation value 4. LCD graphic display radiation value trend 5. Radiation assessment, remind you whether the radiation value is safe 6. Stylish design, easy to operate, it is easy to move or perform on-site measurement 7. Can test electric field radiation and magnetic field emission to achieve good test results 8. Used to test and study indoor and outdoor electromagnetic radiation 9. Built-in electromagnetic radiation sensor, after processing by the control microchip, the radiation value can be displayed on the LCD digital display. You can deal with electromagnetic radiation reasonably or take effective preventive measures based on the test results 10. Test bandwidth: 5Hza??3500MHz 11. Sampling time: about 0.4 seconds 12. Working temperature: 0-50 degrees Celsius 13. Operating humidity: relative humidity is less than 80% 14. Working voltage: 9V 15. Power supply: 6F22 9V battery 16. Size: 63.6x31x125.8mm 17. Weight: 146g

Read more less

1. Menu operation and color screen high-definition display. 2. It can quickly, non-destructively and accurately measure the thickness of the non-magnetic coating on the magnetic metal substrate and the thickness of the non-metal coating on the non-magnetic metal substrate. At the same time, it can automatically identify the magnetic metal substrate and the non-magnetic metal substrate. 3. Two measurement methods: single measurement and continuous measurement. 4. Three calibration modes: basic calibration, offset calibration, and zero calibration. Metric/English units and storage function. 5. Screen rotation, charging protection, multi-interface display, screen brightness selection. 6. Widely used in manufacturing, metal processing, chemical, commodity inspection and other testing fields. 7. Support USB and battery power supply. 8. Measuring range: 0-1500um/0-1.5mm/0-59mil 9. Lower limit diameter of magnetic metal substrate: 12mm 10. Lower limit thickness of magnetic metal substrate: 0.5mm 11. The lower limit radius of curvature of the magnetic convex substrate: 2mm 12. The lower limit radius of curvature of the magnetic concave substrate: 11mm 13. Lower limit diameter of non-magnetic metal substrate: 50mm 14. Lower limit thickness of non-magnetic metal substrate: 0.5mm 15. Battery: 3 x 1.2V Ni-MH battery or 5V 1A power adapter 16. Weight: 132g 17. Dimensions: 150 x 65 x 30mm

Read more less

1. Four-level battery display2. Working current: 5mA3. Working voltage: 3-34V4. Please be waterproof for outdoor use5. Working temperature: -20-50 degrees Celsius6. When the battery level is less than 25%, only the red frame is displayed7. S1-S8 optional pads can only be connected to one type, and 2 or more simultaneous short-circuiting are not allowed8. Lithium battery, lead acid, nickel metal hydride, battery can be used to display the battery, as long as the voltage is within the range of the parameter table9. Battery-type power display, select the corresponding solder pad to detect the voltage of the battery pack corresponding to 1S-8S, which is very convenient10. How to use: connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test, and the digital tube will display the real-time battery power

Read more less

1. Large optical lens, suitable for indoor and outdoor use; high-frequency green light, measured farther, and clearer outdoors2. Electronic level sensor, refresh angle data in real time3. Low distortion optical lens, greatly reducing the influence of ambient light4. Scope of application: indoor ranging measurement, length/height measurement5. Measurement mode: length / area / volume / Pythagorean / angle measurement / height measurement / wall speed measurement6. Measuring range: 50 meters, 70 meters, 100 meters7. Working power: 10.8w8. Working voltage: 4.5v9. Working current: 2.4A10. Power supply mode: 3 AA batteries (not included in the product)11. Packing list: host, manual, color box, cloth bag, reflector, lanyard12. Dimensions: 11.8 x 5.2 x 2.7cm13. Weight: about 500g

Read more less

1. PMMA lens, increase light transmittance and light input2. 2.4-inch high-definition color screen, collimating focusing lens, dual photosensitive holes3. Electronic universal horizontal bubble, 360-degree accurate positioning4. Photography + dual power supply: small optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, live voice broadcast5. Photography + dual power supply + Bluetooth: large optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, real voice broadcast, Bluetooth mobile APP6. Camera + video + bluetooth + drawing: large optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, Bluetooth mobile APP, dual processor, 4x digital zoom, photo/audio/video, music video playback , 16G storage space, trapezoidal measurement7. Scope of application: distance measurement / area volume measurement / Pythagorean measurement / Bluetooth drawing8. Battery capacity: photography + dual power supply / photography + dual power supply + Bluetooth: 2400mah; camera + video + Bluetooth + drawing: 4800mah9. Power mode: USB charging / built-in lithium battery10. Measurement mode: Length/Area/Volume/Pythagorean/Angle Height/Wall Speed ??Measurement11. Measuring range: 80 meters, 120 meters, 200 meters12. Charging voltage: DC 5v13. Charging current: 1A14. Charging power: 5w15. Dimensions: photography + dual power supply / photography + dual power supply + Bluetooth: 12.5 x 5.4 x 2.7cm, camera + video + Bluetooth + drawing: 14 x 5.8 x 2.8mm16. Weight: about 160g

Read more less

1. Material: ABS2. Output: pulse3. One pulse: 0.3mm4. Theoretical temperature transmitter: measurement temperature is 49 degrees Celsius and below5. Power type: AA battery (not included)6. For Misol7. Using special precision die-casting process, the dimensional tolerance is extremely small8. The surface accuracy is very high, all through the internal circuit protection treatment9. The whole sensor has high strength, weather resistance, corrosion resistance and water resistance10. Spare parts (rain gauge) for professional weather stations, connected to professional weather stations11. Weight: 270 grams12. Display size: 4.0~6.9 inches

Read more less

Product Parameters1. Voltage range: AC 95-240V, 50-60Hz 2. Current: 5A 3. Sensor: NCT, 10K 4. Temperature error: +-1 degrees Celsius 5. Time error: less than 1% 6. Temperature control range: 5-35 degrees Celsius 7. Normal working environment temperature/humidity: -10~45 degrees Celsius, 5~95%RH (no water vapor condensation) 8. Power: less than 1.5W 9. Panel material: PC+ABS 10. Install the embedded box: 86mmx86mm/conventional European box 11. Protection class: IP20 12. Button type: capacitive touch button 13. Screen: LCDProduct Features1. LCD display, more friendly interface 2. Touch operation buttons, smoother interaction 3. Ultra-thin embedded panel, fit all kinds of walls 4. Borderless small rounded corner design 5. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environmentsFunction Features1. Rich function options, Modbus, WiFi, room card, etc., to meet all your needs 2. Strict temperature control accuracy to provide the temperature you want 3. Power off protection, save all your settings safely 4. Provide weather information and humidity display 5. 5+1+1 mode preset adjustment for a week, programmable setting for 6 periods a day, green energy saving, less expenses, more intelligent environmental protection 6. Support the creation of product local groups/shares to achieve unlimited centralized control/multi-terminal control of the number of products 7. Suitable for Tmall Genie, Amazon Echo, Google Home voice control

Read more less

1. The D52-2058 rail-type digital display multi-function meter simultaneously displays the measured AC voltage, AC current, power factor, active power, frequency, and electrical energy (electricity) on the meter.2. Please check AC80-300V for measuring 110V 220V voltage, and 200-450V for measuring 380V voltage3. Measurement accuracy: 1% +/- 2 words4. Display: 4-digit red 0.31-inch LED digital tube for voltage display, 5-digit red 0.31-inch LED digital tube for current and frequency display, 5-digit green 0.31-inch LED display for active power and electrical energy (electricity) Digital Tube5. Measurement range: AC voltage: AC80. 0-300. 0V, AC200. 0-450. 0V, AC current: AC0-100. 0A, the current display resolution is 0. 01A when the measurement current is less than 100A, and the measurement current is greater than 0.01A At 100A, the current display resolution is 0.1A, and the range is automatically converted.6. Active power: (measurement voltage AC80. 0-300. 0V) 0.0-30000W (AC200. 0-450. 0V: 45000W)7. Electric energy: 0. 000-99999kwh, decimal point automatic conversion8. Power frequency: 45. 00-65. 00HZ9. Power factor: 1.000-0. 00010. Measurement speed: about 2 times per second11. Weight: 145g12. Installation width: the instrument occupies the 3P air switch position (DZ47/C45)14. Installation method: track type

Read more less

1. It can measure and display 6 parameters such as AC voltage, AC current, active power, power factor, frequency and electric energy at the same time\2. The instrument display part adopts color high-definition LCD screen3. Auto-save function: When the power is off, the meter will automatically save the current energy value, and the meter will read the value after the next power-on, and continue to accumulate4. Measurement speed: about 2 times/second5. Dimensions: 79x43x48mmMeasuring range:1. AC voltage: AC80.0-300.0V, or AC200.0-450.0V2. AC current: AC0－99.99A, the current display resolution is 0.01A, when it exceeds 100A, it displays 100.0A3. Power frequency: 45.0Hz-65.0Hz4. Power factor: 0.00-1.00PF5. Active power: The measurement range is 0-45000W (the display resolution between 0-9999.9W is 0.1W, the rest is 1W)6. Electric energy: The measuring range is 0-99999kwhHow to use and connect1. Connect according to the wiring diagram in the attached picture, connect the secondary end of the current transformer with the instrument (green lead) to the blue terminal of the instrument, and pass the wire of the measurement loop through the middle round hole of the current transformer2. Connect the voltage measurement lead to the green terminal of the meter; then connect the measurement voltage; start reading the measurement results3. After the power is turned on, the meter displays the measured value4. Press and hold the reset button on the front panel of the instrument for 5 seconds

Read more less

1. Mainly used to test various battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, discharge energy, power consumption and running time, and display the measurement data through the LCD screen.2. Voltage:- Measuring range: 0-200V. (When the test voltage is less than 8V, please use the independent power supply method)- Display format: less than 10V display such as: 9.99VBelow 100V such as: 99.9VMore than 100V display such as: 199V- Minimum resolution: 0.01V-Start test voltage: 0.05V- Measurement accuracy: 1%3. Current:- Measuring range: 0-10A (Model: PZEM-013)0-300A (Model: PZEM-015)- Display format: less than 1A display as: 999mALess than 10A is displayed as: 9.99aLess than 100A is displayed as: 99.9AGreater than or equal to 100A is displayed as: 199A- Minimum resolution: 1mA-Initial test current: 10mA (Model: PZEM-013)20mA (Model: PZEM-015)- Measurement accuracy: 1%4. Power:- Measuring range: 0-2000W (Model: PZEM-013)0-60000W (Model: PZEM-015).-Display format: less than 10W display as: 9.99WLess than 100W displayed as: 99.9WLess than 1000W displayed as: 999WLess than 10000W display as: 9.99kWGreater than or equal to 10000W displayed as: 19.9kw- Minimum resolution: 0.01W-Initial test power: 0.1W (Model: PZEM-013)0.2W (Model: PZEM-015)- Measurement accuracy: 1%5. Impedance:- Measuring range: 0-1000Ohm- Display format: less than 100Ohm displayed as: 99.9OhmGreater than or equal to 100Ohm displayed as: 999ohmWhen the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 0.1ohm- Measurement accuracy: 1%6. Internal resistance:- Measuring range: 0-999Milliohm-Display format: 999Milliohm When the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 1Milliohm- Measurement accuracy: 1%Note: Before testing the internal resistance, you need to preset the full voltage according to the battery type, and you can test it after it is fully charged; if it is not fully charged, you can set the no-load battery to the full voltage, and then test it; the internal resistance is not a fixed value, the more the battery is discharged, the more The more, the higher the resistance.7. Capacity:- Measuring range: 0-1000Ah- Display format: less than 1AH is: 999mAHLess than 10Ah displayed as: 9.99 AhLess than 100AH ??is displayed as: 99.9ahLess than 1000AH is displayed as: 999AH- Minimum resolution: 1mAH- Measurement accuracy: 1%8. The discharge energy is represented by the battery symbol, with a total of 10 grids, and each grid represents 10% of the power.9. Energy- Measuring range: 0-9999kWh-Display format: less than 1kWh display as: 999WhLess than 10kWh displayed as: 9.99kwhLess than 100kWh is displayed as: 99.99kwhLess than 1000kWh is displayed as: 999.99kWhGreater than or equal to 1000kWh displayed as: 9999kWhReturn to zero on overflow- Minimum resolution: 1Wh- Measurement accuracy: 1%

Read more less

1. Small and easy to carry, it can be used to measure jewelry, leather, metal plate, paper, film, wire and similar materials.2. Accurate measurement and easy operation3. Material: metal4. Color: silver5. Measuring range: 0-10mm6. Measurement accuracy: 0.1mm

Read more less

1. Power supply: 230V AC 50/60Hz2. Current: 40/63A3. Over-voltage protection value range: 230-300V4. Under-voltage protection value range: 210-140V5. Installation: 35mm DIN rail6. Material: ABS + electronic components7. Size: about 8.5x6.5x3.7cm8. Weight: about 184 gramsFeatures:1. Over-voltage protection2. Under-voltage protection3. Over-current protection4. Automatic recovery5. Adjustable recovery delay time6. Voltage display (voltage measurement)7. Current display (current measurement)

Read more less

1. Material: metal+ABS2. Support history saving3. Support temperature offset4. 4.3 inch LCD screen display, history record preservation5. Temperature unit between celsius and fahrenheit switch6. CO2 Technology: Infrared (NDIR)7. CO2 detection range: 400ppm -5000 ppm8. CO2 alarm value: 1000ppm9. CO2 alarm on/off function (if you dont like the alarm, you can manually set it to turn off)10. Power supply: rechargeable lithium battery 3000mAh11. Can detect CO2 (carbon dioxide), temperature and humidity, with clock and recording functions12. Combining infrared (NDIR) sensor with built-in fan, it can monitor carbon dioxide (CO2), temperature and humidity in real time on its digital LCD display13. Product size: 145x78x97.2mm14. Product net weight: 225 gramsPacking list:- Host x 1- Manual x 1- Charging cable x 1

Read more less

1. This infrared thermometer is used for measuring the tem perature of the objects surface, which is applicable for va rious hot, hazardous or hard-toreach objects without contact 2. Safely and quickly3. Response time 500 mSec, 95% response4. Spectral response: 5-14 um5. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit6. 9V battery(Not Included)

Read more less

1. Measuring PH value of the solution2. Measuring the temperature of the solution3. LCD backlight hold4. Data hold 5. Temperature unit switch6. Power off memory 7. Solution temperature compensation8. Low battery indication

Read more less

1. High precision, high reliability, suitable for high-end applications 2. Small size, can display voltage and current at the same time 3. Reverse connection protection, reverse connection will not burn, using common ground design 4. Anti-collision design with shell, more durable 5. Adopt industry standard size, more convenient to install 6. Ambient temperature: -15 to 70 degrees Celsius 7. Measuring voltage: DC0-100V, 50A 8. Working voltage: DC4.5-30V 9. Working air pressure: 80-106kpa 10. Working current: less than or equal to 20 mA 11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply. 12. Dimensions: 48 x 29 x 21cm 13. Weight: about 15g

Read more less

1. 9.5 inches super large full-screen LCD with large bold red font to display for easy reading.2. 24 hours real-time monitoring the sound level.3. Support hanging on the wall(recommended) or free-standing on the desk.4. Wide measurement range from 30dB to 130dB, Frequency: 31.5Hz - 8KHz, Resolution: 0.1dB/1dB.5. Buzzing and flashing to remind you when the real-time measurement is reached to the alarm level, and hold the data for 3s then back to normal mode.6. Suitable for checking and monitoring the sound level for personal, family, business, studies, industrial, etc.

Read more less

1. One EMF Tester with two uses, testing the electric field and the magnetic field radiation at the same time.2. Measure radiation of high voltage power lines, appliances, electrical wires.3. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.4. Data hold and max measurement, one-key lock the radiation value.5. Large & clear LCD display of the values for easy reading.6. Easy to operate with easy one-hand operation, easy to carry and make field measurement.7. Can measure the environment temperature with 2 temperature units (C/F).8. Electric field strength range: 0~1999V/m9. Electric field strength resolution: 1V/m10. Magnetic field strength frequency range: 20Hz~300Hz11. Electric field strength frequency range: 20Hz~3500MHz12. Power Supply: 3 x 1.5V AAA battery (Not included)

Read more less

1. Fast response speed, high precision, of its stability, good repeatability.2. The apparatus is widely used in metallurgy, power plant, farms, mines, chemical, scientific research, medical, pharmaceutical, environmental protection, and other fields.3. With a large LCD screen displaying the measured results, you can get ammonia gas concentration at a glance.4. The ammonia gas monitor has an audio and visual alarm, you can set an audio alarm decibel that can give you an obvious prompt.5. Portable and handheld, easy to operate and carry.6. Power supply: 3.7V li-battery.

Read more less

Specifications1. Operating voltage: 8.0 ~ 120.0 VDC, typical value 60 VDC 2. Working power consumption: 3.0~ 5.0 mA, normal value 4.0 5.0 3. Sleep power consumption: 100~ 350 uA, normal value 300 uA 4. Battery Resolution: 0.1 % 5. Voltage resolution: 0.1 V 6. Current resolution: 0.1 Ah 7. Capacity Resolution: 0.1 A 8. Voltage accuracy: +/-0.5 % 9. Current accuracy; +/-00.5 % 10. Capacity accuracy: +/-01% % 11. Battery capacity setting: 0.1 999Ah 12. Auto sleep current value: 30~ 50 mA, normal value 40 mA 13. Auto-on current value: 30~ 80 mA, normal value 50 mA 14. Meter size; 61.3 x 33.3x 13.5 mm 15. Hole size: 58.5 x 28.5 mm 16. Operating temperature: -10~50 degree CFeatures1. GY-K1S is a high-precision battery power display meter, which accurately displays the battery power percentage, capacity, current, and voltage by means of current calculation (coulomb counter). 2. The GY-K1S coulomb meter is not limited by the type of battery. It can be used on any battery with a battery voltage of 8-120V. It can accurately grasp the working status of the battery in time; especially for loads with large current fluctuations and intermittent work. The use of high-current loads is very effective, such as various electric vehicles, sweepers, electric forklifts, and equipment with high-power motors. 3. The power is displayed by liquid crystal, which is clearer and more power-saving 4. Applicable to any battery, battery pack or device, such as lead-acid battery, water battery, Lithium batteries, lithium iron phosphate batteries, nickel-cadmium batteries, nickel-hydrogen batteries, etc. 5. Support capacity setting, support reset battery voltage value setting 6. Turn on and off the display manually, and automatically turn on and off the display when the current is detected 7. 10 seconds delay automatic sleep function, can withstand ultra-wide voltage input

Read more less

1. convertible temperature units (Celsius and Fahrenheit), 2 indicator lights to show the work status; And comes with 2.5m external sensor. Max 16A.2. Suitable for electric heating radiator, electric cooling and temperature control system. It can be used in smart homes, shopping malls, and industrial places.3. 5+1+1 & 6 Periods Function: With 7 days programming mode to set, 6 periods to adjust different temperatures.4. WiFi Connect & APP Control: Support control and adjust the temperature setting program in your mobile device5. Size: 12 x 6.2 x 3.5cm.6. Complete Functional LCD: Equipped with LCD screen, accurate to display the temperature status and operating mode; With sensitive and responsive touch button for easily operate.

Read more less

1. Scope of application: can test 74ch series, osmo series, cd4000 series, hef400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic transistor identification, voltage regulator voltage identification2. Integrate more than 1,300 types of chip data models and more than 420 types of transistor data models, covering most common general-purpose devices within 24 pins, which can greatly reduce maintenance workload and improve work efficiency3. Press the Enter key to turn on the machine for the first time and automatically run a self-test. The self-test detects the battery voltage and displays it on the screen after more than two seconds. When the battery voltage is lower than 7v, replace the battery to ensure the measurement accuracy. If If there is no alarm, the measurement work can be started4. Nativead 10 ad, the theoretical resolution of 5v voltage is 0.0048v5. Due to the use of batteries for power supply, it is not suitable for measuring high-power thyristors6. The Zener value must be based on the actual measurement, not just the nominal value7. The default directory for initialization is the search directory8. Different test modes: 5v mode, 3.3v mode, auto mode9. There are seven buttons on the panel, which are respectively used for up, down, left, right and typing keys and hotkeys o, p10. The up and down keys are used to adjust the catalog and change the model, and the left and right keys are used to move the cursor left and right to select the item to be changed11. The input key is used to change the machine and execute the test command12. Use two AA 1.5v batteries (not included), press Enter for more than 2 seconds to turn on the machine, and the current battery voltage will be displayed automatically when the machine is turned on. When the battery power is too low, replace the battery. Too low voltage will affect the reliability of the test results. and automatic shutdown protection13. After 60 seconds without any operation, it will automatically shut down14. Test socket: SOP16 narrow body, SOP20 medium body, SOP24 wide bodyThe device positioning method is as follows:1. Place the chip and optocoupler on the top of the alignment, and the 1-pin ic alignment seat2. The triode on the left, mostly three slots3. The 13 and 14 pins of the ic regulator are placedNote: Transistor display pin sequence from left to right corresponds to 10-foot, 11-foot, 12-foot ic block (not built-in battery or adapter)

Read more less

1. Operating voltage: 90-250V / 45-65Hz 2. Phase voltage: 90-250V / 45-65Hz 3. Leakage voltage: 0-99V / 45-65Hz 4. Operating temperature: 0-40 degree Celsius 5. Operating humidity: 20-75%RH 6. Storage temperature: -10~50 degree Celsius 7. Storage humidity: 20-80%RH 8. Altitude: less than 2000m 9. RCD test: more than 30mA 10. RCD working voltage: 220V 11. GFCI test: more than 5mA 12. GFCI working voltage: 110V

Read more less

1. WiFi connection, temperature, humidity, carbon dioxide, buzzer alarm, Tuya Smart2. When the carbon dioxide concentration reaches the preset value, the buzzer will alarm3. Applicable to a variety of scenarios, real-time monitoring, in the car, public places, offices, bedrooms4. Back hook, easily fixed in the air5. Temperature/humidity dual detection, cold, warm, dry and wet, clear at a glance6. Temperature range: -10 to 40 degrees Celsius7. Measuring range: 40 square meters8. Battery capacity: 2400mah9. Power supply mode: TYPE-C/USB-C charging/built-in lithium battery10. Charging voltage: 5V/1A11. Dimensions: 98 x 90 x 40mmManual calibration:1. Press and hold three keys at the same time in the off state2. Enter the calibration state, and the screen will display a 200-second countdown3. Calibration is successful

Read more less

Parameters:Power supply: 95~240VAC, 50~60HzCurrent load: 5ASensor: NTC3950, 10KAccuracy: +/-0.5 degrees CelsiusSetting temperature range: 5-35 degrees CelsiusRoom temperature range: 5-99 degrees CelsiusDisplay temperature range: 5-99 degrees CelsiusAmbient temperature: 0-45 degrees CelsiusAmbient humidity: 5-95 % RH (non-condensing)Storage temperature: -5-45 degrees CelsiusPower Consumption: 1.5WProtection class: IP20Shell material: PC+ABS (fireproof)Installation box: 86x86mm square box or European style 60mm round boxFeatures:1. Adopt gorgeous UI design, beautiful and practical2. H9 tempered glass screen, scratch-resistant and easy to clean3. Compatible with standard 86mm square cassettes and 60mm European cassettes, meeting all installation environments4. Strict temperature control accuracy, providing the warmth you want5. Built-in power-off protection, save all settings safely6. Provide weather information and humidity display, easy to use7. 5+1+1 mode preset adjustment per week, 6 time periods per day programmable settings, green energy saving, lower cost, smarter and more environmentally friendly8. Support the creation of local product groups/sharing, and realize unlimited centralized control/multi-terminal control of the number of products9. Applicable to Tmall Genie, Amazon Echo, Google Home to experience a new voice control method

Read more less

1. With sound and vibration alarms that increase in intensity as the detector moves closer to the metal2. LED flashlight provides assistance in dim and low light conditions3. With diving mode, standard IP68 waterproof rating, can be operated reliably underwater from 30m-60m4. Two keys design, can be easily controlled and easy to operate5. Charging interface: Type-C/USB-C6. Battery capacity: 1500mAh7. Depth: can dive to 30-50m8. Indicator: audio/vibration/LED9. Mode: sound mode, vibration mode, sound + vibration mode, dive mode10. Sensitivity: about 8-12cmPacking list:- Metal detector x 1- Cover x 2 (1 waterproof, 1 not waterproof)- Spring buckle x 1- Charging cable x 1- User manual x 1

Read more less

1. DC mini temperature controller, fast temperature control, easy to operate and easy to use2. Multiple functions, easy to use, fish pet breeding, carpet heating, turtle pet breeding, hatching breeding3. Simple operation, easy to use, increase the temperature display4. Shell material: ABS5. Control type: temperature6. Control mode: intelligent temperature control regulator7. Temperature range: -40 to 120 degrees Celsius8. Power supply voltage: DC5~24V9. Output current: 2A10. Line length: 1 meter11. Dimensions: 62 x 27 x 12mm

Read more less

1. Non-contact laser sensor, high precision and fast measurement, safer to use2. High sensitivity, stable and reliable, safer to use3. Simple button, easy to operate4. With portable handbag, easy to use, protect the safety of the instrument5. HD large screen, digital display, clear reading6. Memory automatic storage function, after the measurement, the maximum value, minimum value and the last value are automatically stored in the meter, press the memory key to view7. Non-contact photoelectric technology design, for some fast and can not measure the object to detect, such as fan motors, aircraft propellers, cars, etc.8. Scope of application: commonly used in motors, fans, paper, plastics, chemical fiber, washing machines, automobiles, aircraft, ships and other manufacturing range9. Power supply: 1 section 9V battery (not included)10. Size: 13.1 x 7 x 2.9cm11. Weight: about 130gUsage:1. Turn on the power, press and hold the measurement button2. Put the reflective paper on the fan blade of the measuring fan3. Align the reflective paper on the fan blade and measure to get the speed value

Read more less

1. Start-up measurement, intelligent identification, non-contact measurement 2. Three-in-one multimeter + electric tester + phase sequence detector 3. Phase sequence induction detection: put the nibs close to the phase line ABC test points respectively, the green indicator light turns on, and the screen displays R, indicating that it is forward direction; the result, the red indicator light turns on, and the screen displays L, indicating that it is reverse direction 4. Line breakpoint detection: In the NCV non-contact voltage detection mode, check the breakpoint position along the line when the single-strand line is charged 5. Fine stainless steel watch needle: the negative input terminal is closely connected with the test lead, which is firm and durable, and is suitable for circuit maintenance and testing of various electrical appliances and small electronic components 6. In NCV mode, when a nearby AC voltage is detected, the LED indicator light will be red, and an alarm buzzer will sound, making it safer to measure electricity without contact 7. Intelligent identification of neutral and live wires: Select the function of distinguishing live neutral and live wires, insert the pen needle into the hole for identification, no need for traditional contact measurement methods, and it is safer to measure electricity 8. Portable and compact, easy to use, pen-style design 9. Detachable positive pen tip: silver-plated, anti-oxidation, not easy to break and wear, just clamp the stainless steel pen tip with pliers and rotate it out, equipped with a cap protection 10. Battery type: 2 x AAA batteries (not included in the product) 11. Screen display: HD backlit screen 12. AC/DC voltage: 600V 13. Measurement function: resistance, AC voltage, DC voltage 14. Counting: 4000 counts 15. Resistance: 40 megohms 16. Dimensions: 183.5 x 24 x 29mm 17. Weight: 57g

Read more less

1. Measuring range: 0.1-200000LUX2. Measuring gear: 999.9/99999 /19999x10LUX; 99.9/999.9/19999 FC3. Illuminance display: 5-digit display, up to 999994. Sensor: digital light probe and filter5. Angle of incidence: 120 degrees6. Spectral range: 400-700nm7. Sampling rate: 8 times / second8. Automatic shutdown: 15 minutes (can be manually shut down)9. Operating environment: -10 - 50 degrees Celsius, within 80% relative humidity, indoor altitude less than 2000m10. Storage environment: -10 - 50 degrees Celsius, within 70% relative humidity (remove the battery)11. Power supply: 3 x 1.5V AA (LR06) batteries (not included) / USB Micro interface 5V12. Display size: approx. 5.3 x 4.4cm13. Size: about 25.6 x 6.7 x 3.5cm14. Weight: approx. 250gFeatures:1. Light source type selectable, customizable light source coefficient2. Probe can be rotated 360 degrees, detachable measurement, spring wire can be stretched 1.5m3. Upper / lower limit alarm: the upper and lower limit alarm threshold can be set, when the measurement is higher or lower than the set threshold, there will be a buzzer alarm sound, as well as alarm lights flashing4. Battery (not included) and USB interface two power supply modes5. VA high-definition color display, display with background lighting6. USB computer communication (only TA632B): with real-time data communication with computer, display real-time data tables and real-time data graphs; xlsx data tables and graphs export and print, the upper computer software for computer systems Win7, Win8, Win10Packing list:- Host x 1- Cloth bag x 1- Instruction manual x 1- Data cable (TA632B)

Read more less

1. Maximum detection depth: ferrous metal: 100mm, non-ferrous metal: 80mm, copper wire: 40mm, foreign matter: 20mm/38mm2. Measurement accuracy: about 5mm3. Unit selection: m/inch/ft4. Measuring range (without reflector): 0.05-40m5. Measuring time: 0.3-4 seconds6. Laser type: 620-670nm7. Self-closing laser: 20 seconds8. Storage data: 30 sets of data9. Automatic shutdown time: about 5 minutes10. Screen: 1.8 inch color screen11. Power supply: built-in 300mAh lithium battery12. Working temperature: 0-40 degrees13. Storage temperature range: -20 to 60 degrees14. With single-function buzzer alarm function without data15. Real voice, real-time broadcast for detecting metal (steel bars, copper pipes) and cables hidden in walls, ceilings and floors16. Large-capacity lithium battery, USB chargingPacking list: 1x multi-function instrument, 1x USB data cable, 1x user manual, 1x lanyard

Read more less

1. The color indication of the air quality level is more intuitive2. Track the hazard degree of harmful gases and grasp the health status of the environment3. Semiconductor, infrared, electrochemical detection technology, long standby, alarm prompt, real-time detection4. The shell is hard and not easy to break5. 24-hour continuous monitoring of air quality6. Measuring medium: PM2.5, PM10, HCHO, TVOC, CO, CO2, AQI7. Battery capacity: 1500mah8. Power supply mode: USB charging/built-in lithium battery9. Applicable occasions: home, office, confined space, kindergarten10. Function: detect polluted gas/temperature and humidity11. Size: 70x30x157mm

Read more less

Features:1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.Function:1. Rich function options, Modbus, WIFI, keycard, etc, to meet all your needs;2. Strict temperature control accuracy (+/- 1 degree C) to provide the warmth you want;3. Power off protection, save all your settings safely;4. Preset adjustment of 5+1+1 mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;5. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;6. Perfect access: Tmall GSpecification:1. Current Load: 5A (water heating, waterlgas boiler), 16A (electric heating)2. Sensor: NTC3950, 10K3. Accuracy: +/-1 degree C4. Set Temp. Range: 5-35degree C5. Room Temp. Range: 5-99 degree C6. Display Temp. Range: 5 ~ 99 degree C7. Ambient Temp.: 0~ 45 degree C8. Ambient Humidity: 5 ~ 95 % RH (Non Condensing)9. Storage Temp.: -5~ 45 degree C10. Power Consumption: Less than 1. 5W11. Timing Error: Less than 1%12. Shell Material: PC +ABS ( Fireproof)13. Installation Box: 86 x 86mm Square or European 60mm Round Box14. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm215. Protection Class: IP2016. Buttons: Capacitive Touch Buttons

Read more less

Features:1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.Function:1. Rich function options, Modbus, WIFI, keycard, etc, to meet all your needs;2. Strict temperature control accuracy (+/- 1 degree C) to provide the warmth you want;3. Power off protection, save all your settings safely;4. Preset adjustment of 5+1+1 mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;5. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;6. Perfect access: Tmall GSpecification:1. Current Load: 5A (water heating, waterlgas boiler), 16A (electric heating)2. Sensor: NTC3950, 10K3. Accuracy: +/-1 degree C4. Set Temp. Range: 5-35degree C5. Room Temp. Range: 5-99 degree C6. Display Temp. Range: 5 ~ 99 degree C7. Ambient Temp.: 0~ 45 degree C8. Ambient Humidity: 5 ~ 95 % RH (Non Condensing)9. Storage Temp.: -5~ 45 degree C10. Power Consumption: Less than 1. 5W11. Timing Error: Less than 1%12. Shell Material: PC +ABS ( Fireproof)13. Installation Box: 86 x 86mm Square or European 60mm Round Box14. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm215. Protection Class: IP2016. Buttons: Capacitive Touch Buttons

Read more less

1. Material: PC flame retardant material2. Voltage range: 50-300V3. Current range: 0-20A4. Power range: 0-4.4KW5. Timing range: 0.1-9996. Temperature range: -20 degrees to 150 degrees7. Frequency: 50-60HZ8. Full viewing angle color LCD screen, 360 degrees without dead angle9. PC flame retardant material, all-round buckle design, stable installation10. Using professional metering chips to intelligently calculate data

Read more less

1. Material: ABS2. Power specification: AC110/220V3. Temperature display range: -50 degrees to 100 degrees4. Temperature setting range: -30 to 100 degrees5. Working humidity range: 5-90%RH6. Temperature resolution: 0.5 degrees7. Sensor type: 10K39508. AI intelligent adjustment technology, cascade control adjustment, precise temperature control9. The circuit board is designed with strong anti-interference ability, which can deal with field interference in various complex working conditions10. Comprehensive power protection technology, safe and worry-free

Read more less

1. Charging method: 5V/1A mobile phone power adapter2. Charging time: about 1.5h3. Working time: about 13 hours4. Standby time: about 8 months, automatic shutdown when voltage is lower than 2.9V5. Working current: 90mA6. Power: 400mW7. Working temperature: -10 degrees to 60 degrees8. LCD interface display, data recording, battery power display9. Maximum output deviation from the best straight line applicable to the measured output within the pressure range at 25 degrees10. Suitable for testing fan and blower pressure, filter resistance, wind speed, furnace pressure, orifice pressure difference, bubble water level, hydraulic system pressure, etc. Also suitable for controlling gas proportions and automatic valves during combustion, monitoring blood pressure and respiratory pressure.

Read more less

1. Can be used for all kinds of wood cardboard and dry goods testing2. Large liquid crystal display wood moisture value3. Built-in four modes for accurate testing4. Ergonomic design, adapt to a variety of special occasions5. Built-in low battery detection and automatic power off functionParameters:1. Material: ABS2. Measuring method: resistance value3. Measuring range: 0-99.9 percent4. Resolution: 0.1 percent5. Accuracy: 0.5 percent6. Pin length: 10mm7. Automatic shutdown: 10 minutes8. Power supply: 1 x 9V battery (not included in the shipment)9. Operating temperature: 0-40 degrees celsius10. Size: 145 x 67 x 32mm11. Weight: 200g

Read more less

1. Widely used in gas pipeline leak detection, household gas prevention, gold mining, tunnel mine operations, oil and gas extraction, hazardous goods storage warehouses, etc. 2. It is convenient for users to safely detect various combustible gases, such as: methane, carbon monoxide, gasoline, ethylene oxide, etc. 3. Range: 0-1000PPM 4. Accuracy: less than or equal to 10% FS (methane) 5. Sensitivity: less than 50PPM (methane) 6. Response time: less than 2s 7. Warm-up time: about 30s 8. Display: LCD 9. Supports automatic zero return, automatic shutdown, and battery low voltage indication 10. Power supply method: AAA battery x2 (not included) 11. Size: 180x32x31mm

Read more less

1. Plug and play USB interface. 2. 16384 data storage. 3. Adopt high precision digital temperature and humidity sensor. It has the characteristics of high precision, fast speed and good stability, and is suitable for data collection and recording of ambient temperature and humidity. 4. Automatically generate PDF files for easy download, analysis, export and print data. 5. Two fixed methods. The 3M adhesive tape is fixed, and after peeling off the 3M adhesive film, it is stuck in a flat and smooth position. Use the expansion screw to secure the bracket. 6. Widely used in indoor temperature measurement, pool management, logistics and transportation, communication room, intelligent buildings, subway, shopping malls, libraries and other places and occasions. Parameter: 1. Size: 7.6x4.2x2.5cm. 2. Power: CR2032 button battery. 3. Temperature measurement range: -40-70 degrees Celsius / -40-158 degrees Fahrenheit.

Read more less

Measurement range: -18 °C ~ 1150 °C ( 0 °F ~2102°F ) Accuracy: -18°C ~ 0°C( ± 3°C), 0°C ~100°C (± 1.5°C), 100°C~1150°C (±1.5%) Repeatability: 1 °C or 1% of reading Resolution: 0.1°C or 0.1°F Response Time: 500mSec, 95% response Emissivity : 0.1~1.00 adjustable Distance To Spot Ration: 50:1 Spectral response: 8~14μm Storage Temperature: -20°C ~ 60°C ( -4 °F ~140 °F ) Operating Temperature: 0°C ~ 40°C ( 32 °F ~104 °F ) Operating Humidity: 10-95% RH non-condensing, up to 30°C (86°F )

Read more less

1. ABS plastic case is light in weight and durable.2. Relative/absolute measurement interchangeability angle and slope reading at any position Convert the measuring surface with built-in magnet for easy connection to the object to measure the workpiece.3. Automatically close the portable size within 5 minutes, which is convenient for use with other measuring tools to expand the measurement range:4. Drain angle and runoff slope level and tractor work alignment Set the blade angle of the circular saw blade Tool setting on the lathe, table saw, connecting table, band saw connecting fence or band saw platform monitoring5. Easy to carry, can be measured anytime, anywhere.

Read more less

Feature1. Ideal and necessary tools for gardeners, vegetable and fruit growers and all those who plant trees and grasses2. You can take good care of your plants.3. Suitable for indoor and outdoor plants, gardens and lawns.4. Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.5. To avoid damage to the electrode, clean the electrode after each use, do not use it in soil with gems and forcibly insert

Read more less

Features Color-screen display, user-friendly interface.Bilingual choices:Chinese/English.Three alarm forms:sound/light/vibration .Data recording and review function, continuously record120,000 data logging.Charging function. Specification Gas detection:COMeasurement Range: 0~100μmo/molResolution: 1 Accuracy: When the measuring range is(0~50)mol/mol,maximum allowable error is:5mol/mol.When the measuring range is(50~1000)mol/mol,maximum allowable error is:10%Indication model:LCD display real-time date and system state,LED,sound,vibration indication alarm Response Time(90%): Less than 30 seconds Alarm: Sound and light vibration alarm Alarm Point: Adjustable Working Voltage: DC3.7V, 1800mAh Battery Model: LP103450-1800mAh rechargeable lithium batteryExplosion-proof Certificate NO.: CNEx 18.5122Explosion-proof Mark: Ex ib IIB T3 GbOperating Conditions: -20～50℃ / -4～122℉, < 95%Storage Conditions: -10～55℃ / 14～122℉, < 85%charging time:6-8hstandby time:more than 8h on end (slightly change with working state)Weight: 215.4g(with battery and back buuton)Item Size: 71 * 153* 49mm Package included 1 * Carbon Monoxide Monitor1 * Plastic Pipe1 * USB Cable1 * Gas Calibration Cover1 * Storage Box1 * User Manual

Read more less

Features 1.Color-screen display, user-friendly interface.2.Bilingual choices:Chinese/English.3.Three alarm forms:sound/light/vibration .4.Data recording and review function, continuously record5.120,000 data logging.6.Charging function. Specification Compound Gas Monitor Range Measuring item and Unit 1.Combustible gas LEL %LEL2.Oxygen O2 %VOL3.Hydrogen sulfide H2S μmol/mol4.Carbon Monoxide CO μmol/molRange:1.Combustible gas LEL: 0~1002.Oxygen O2 : 0~303.Hydrogen sulfide H2S:0~100 4.Carbon Monoxide CO :0~1000Resolution1.Combustible gas LEL: 0.12.Oxygen O2 : 0.13.Hydrogen sulfide H2S:0.14.Carbon Monoxide CO :1Accuracy: When the measuring range is(0~50)mol/mol,maximum allowable error is:5mol/mol.When the measuring range is(50~1000)mol/mol,maximum allowable error is:10%Indication model:LCD display real-time date and system state,LED,sound,vibration indication alarm Response Time(90%): Less than 30 seconds Alarm: Sound and light vibration alarm Alarm Point: Adjustable Working Voltage: DC3.7V, 1800mAh Battery Model: LP103450-1800mAh rechargeable lithium batteryExplosion-proof Certificate NO.: CNEx 18.5122Explosion-proof Mark: Ex ib IIB T3 GbOperating Conditions: -20～50℃ / -4～122℉, < 95%Storage Conditions: -10～55℃ / 14～122℉, < 85%charging time:6-8hstandby time:more than 8h on end (slightly change with working state)Item Size: 71 * 153* 49mm Package included 1 * Carbon Monoxide Monitor1 * Plastic Pipe1 * USB Cable1 * Gas Calibration Cover1 * Storage Box1 * User Manual

Read more less

Brand Name:SNDWAYInduction range:More than 50cm1. Positioning is blocked within 5cm, greatly reducing the removal area2. With 4 sets of waterproof probe sets to be replaced, all kinds of environments can cope3. 50cm signal penetration, using smart chip, the induction is stronger4. Sensitivity can be adjusted, increase the size of the induction blockage point, together with a large sound buzzer, small, small range of accurate positioning of the blockage point, can clearly distinguish the blockage position5. Built-in lithium battery, straightforward and convenient

Read more less

Features:1. With magnet adsorption2. Four-digit display for large range3. With waterproof, digital storage, lock, automatic shutdown functions4. New appearance, classic fashion designTechnical Parameters:1. Measuring range EC: 0-9999uS2. Temperature: 0-80 degrees Celsius; 32-176 degrees Fahrenheit3. Accuracy: +/-2﹪4. Battery: CR2032 button battery x1 (delivered with battery)5. Size: 15 x 2.8x 1.3cm6. Weight: 42.5 g (1.5 oz)7. Purpose: Water treatment, purification equipment, household water purifier, flower aquarium

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-100mm

Read more less