LDTR-WG0247 H-Bridge PWM Semiconductor Double BTS7960B DC 43A Stepper Motor Driver (Blue)

Description

This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A

Specification
1. Double BTS7960 large current (43 A) H bridge driver;
2. 5V isolate with MCU, and effectively protect MCU;
3. 5V power indicator on board;
4. Voltage indication of motor driver output end;
5. Can solder heat sink;
6. Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
7. Isolation chip 5 V power supply (can share with MCU 5 V);
8. Able to reverse the motor forward, two PWM input frequency up to 25kHZ;
9. Two heat flow passing through an error signal output;
10. Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;
11. The supply voltage 5.5V to 27V
12. Size: 5.5 * 5 * 4 cm;
13. Material: FR4
14. Other Features: A product for Arduino that works with official Arduino boards.
15. Weight: 70g
16. Packing List: 1 * Stepper Motor Driver

LDTR-WG0247 H-Bridge PWM Semiconductor Double BTS7960B DC 43A Stepper Motor Driver (Blue)

Product form

SKU: ZY14346987L

  • In stock (Processing Time 1 - 72 hours)

€9,01

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description

    This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A

    Specification
    1. Double BTS7960 large current (43 A) H bridge driver;
    2. 5V isolate with MCU, and effectively protect MCU;
    3. 5V power indicator on board;
    4. Voltage indication of motor driver output end;
    5. Can solder heat sink;
    6. Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
    7. Isolation chip 5 V power supply (can share with MCU 5 V);
    8. Able to reverse the motor forward, two PWM input frequency up to 25kHZ;
    9. Two heat flow passing through an error signal output;
    10. Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;
    11. The supply voltage 5.5V to 27V
    12. Size: 5.5 * 5 * 4 cm;
    13. Material: FR4
    14. Other Features: A product for Arduino that works with official Arduino boards.
    15. Weight: 70g
    16. Packing List: 1 * Stepper Motor Driver

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account