Waveshare FT232RNL USB To RS232/485/422/TTL Interface Industrial Isolation Converter, 23996

Description


Features
1. Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility
2. Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection
6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
9. 3 LEDs for indicating the power and transceiver status
10. High quality USB-B and RS232 connectors, smoothly plug/pull
11. Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to install

Specifications
1. Product type: Industrial grade digital isolated converter
2. Operating system: for Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7
3. Operating temperature: -15℃ ~ 70℃
4. Device port: RS232/485/422/TTL
5. Host port: USB
6. USB:
- Operating voltage: 5V
- Connector: USB-B
- Protection: 200mA self-recovery fuse, isolated output
7. RS232:
- Connector: DB9 male
- Protection: TVS diode, surge protection & ESD protection
- Transmission mode: Point-to-point
- Baud rate: 300bps ~ 3Mbps
8. RS485/422:
- Connector: Screw terminal
- Direction control: Hardware automatic control
- Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)
- Transmission mode: Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more; 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)
- Baud rate: 300bps ~ 3Mbps
9. TTL (UART):
- Connector: Screw terminal
- Pins: TXD, RXD, GND, 5V/3.3V
- Protection: Clamp protection diode, over-voltage/negative-voltage proof, shock resistance
- Transmission mode: Point-to-point
- Baud rate: 300bps ~ 3Mbps
10. Indicators:
- PWR: Red power indicator, light up when there is USB connection and voltage is detected
- TXD: TX indicator, light up when the USB port sends data
- RXD: RX indicator, light up when the device ports send data back
11. Package contents:
- USB TO RS232/485/TTL x1
- USB cable x1

Waveshare FT232RNL USB To RS232/485/422/TTL Interface Industrial Isolation Converter, 23996

Product form

SKU: TBD02026534

  • In stock (Processing Time 1 - 72 hours)

€48,75

    • Guaranteed secure & safe checkout.

    Icon for truckShipping Methods

    To find out all available shipping methods, and the exact delivery time add the product to the cart and verify it using our shipping calculator.

    Icon for 24_hour_clockOrder Processing Time

    All orders are shipped within a maximum of 72 hours from the order's arrival.

    Icon for coinMoney Back Guarantee

    Garmade Money Back Guarantee- Get the item you ordered or your money back, it's that simple.

    Icon for image_placeholderMismatched Product

    Product doesn't match the description? Contact us within 31 days after you receive it!

    Icon for mobile_paymentRefunds

    In case of cancellation, money will be refunded to your account within 14 days.

    Description


    Features
    1. Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility
    2. Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
    3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
    4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
    5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection
    6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
    7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
    8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
    9. 3 LEDs for indicating the power and transceiver status
    10. High quality USB-B and RS232 connectors, smoothly plug/pull
    11. Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to install

    Specifications
    1. Product type: Industrial grade digital isolated converter
    2. Operating system: for Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7
    3. Operating temperature: -15℃ ~ 70℃
    4. Device port: RS232/485/422/TTL
    5. Host port: USB
    6. USB:
    - Operating voltage: 5V
    - Connector: USB-B
    - Protection: 200mA self-recovery fuse, isolated output
    7. RS232:
    - Connector: DB9 male
    - Protection: TVS diode, surge protection & ESD protection
    - Transmission mode: Point-to-point
    - Baud rate: 300bps ~ 3Mbps
    8. RS485/422:
    - Connector: Screw terminal
    - Direction control: Hardware automatic control
    - Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)
    - Transmission mode: Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more; 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)
    - Baud rate: 300bps ~ 3Mbps
    9. TTL (UART):
    - Connector: Screw terminal
    - Pins: TXD, RXD, GND, 5V/3.3V
    - Protection: Clamp protection diode, over-voltage/negative-voltage proof, shock resistance
    - Transmission mode: Point-to-point
    - Baud rate: 300bps ~ 3Mbps
    10. Indicators:
    - PWR: Red power indicator, light up when there is USB connection and voltage is detected
    - TXD: TX indicator, light up when the USB port sends data
    - RXD: RX indicator, light up when the device ports send data back
    11. Package contents:
    - USB TO RS232/485/TTL x1
    - USB cable x1

    Additional Information

    Icon for truckShipping Info

    IMPORTANT INFO - PLEASE CHECK BEFORE ORDERING.



      Estimated transit time and postage fee depends on the method you choose at checkout. Please add the desired product to the cart and there you will be able to see all this information.

      Complete and right address is the guarantee of fast and efficient delivery, so please kindly recheck it when you place an order.

      In order to ensure a fast and efficient delivery, we need to have the method of contact with you. Email and Phone Number is a very important detail and must be accurate. All orders with an incorrect email or phone number will be canceled immediately.

      We strive to dispatch all orders within 72 hours of placing your order. But sometimes if the order is big or the products are more sophisticated, it can take a little longer. As soon as we dispatched it, you will receive a confirmation email along with a tracking number.

      Please be aware that sometimes due to unclear address, hard to access, no answer at address, the package can be kept at your local post office for collection. In this case you will be informed by the delivery company and by us. Please also monitor the tracking number.

      For European Union Countries:
    - If your order is less than 150€ excluding shipping costs, then the Taxes are already included in the price. This means that there will be NO extra charge upon delivery.
    - If your order is more than 150€, you will NOT be charged Taxes at the checkout, and you will have to pay upon delivery based on your local VAT rate.

     

    Icon for reviewReviews

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot your password?

    Don't have an account yet?
    Create account