Bestselling Products

Human nature design, easy installation Driverless(except of win98) Super slim and easy portability The maximum support capacity 400GB External power Supply AC input:100-240V/50-60Hz DC output:5V/12V Shell material:Aluminum Dimension:185*110*33mm Supports Windows 98/SE/ME/2000/XP Mac OS8.6 or latest version

Read more less

1. Input terminal: USB3.0 2. Output: 7+15 SATA 3. USB specification: USB3.0 standard, backward compatible with USB2.0, theoretically the transfer rate can reach 5.0Gbps 4. Support SATA3.0, backward compatible with SATA2.0 5. Support USB hot plug, plug and play, no need to install driver 6. Support UASP acceleration 7. Support hard disk thickness: 7.0mm and 9.5mm, 2.5-inch serial port (SATA 7+15PIN) hard disk, 12.5mm and 15mm hard disks are not supported 8. Support 3 minutes smart sleep (power saving mode), do not operate the disk after 3 minutes of sleep, automatically wake up when the disk is reopened or data is transferred (that is, the hard disk starts to rotate) 9. After the hard disk is safely removed, the hard disk sleeps immediately to better protect the mechanical parts of the hard disk 10. Double LED indicator, power blue light and signal green light 11. Support multiple systems: Win XP /Win7/Win8/Win10/ Vista /Mac OS9/10 and Linux operating system 12. Body size: 11.7x7.5x1.2cm 13. Cable length: 40cm

Read more less

1. Brand new and high quality. 2. 50mm x 30mm M-SATA SSD hard drive external enclosure. 3. Support M-SATA3.0, high speed up to 6Gbps. 4. USB 3.1 Type C interface, high speed up to 10Gbps. 5. Material: Aluminum. 6. Support: Max 1TB. 7. Support Windows 10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above system, without using any drivers, support hot-swap. 8. Led Indicator: LED Power Status: Blue. 9. Not including SSD hard drive.

Read more less

1. Automatically enter sleep mode if not used for 30 minutes, and automatically wake up after reading and writing data 2. Built-in temperature sensor detector, automatically recognize the temperature and turn on the built-in cooling fan 3. Metal frosted aluminum alloy shell, more wear-resistant and corrosion-resistant 4. The capacity of a single hard disk is up to 10TB, and the total capacity is up to 20TB 5. Two RAID switching methods under hardware control, four display modes can be controlled through two sets of hardware switches, which is convenient and safe 6. Support 3.5-inch SATA serial port mechanical disk and solid state disk 7. Support system: Windows, MAC, Linux 8. Material: metal shell + ABS plastic 9. Interface: Type-C 10. Size: 197x125x80mm

Read more less

Exterior:1. Size: about 203x118x32.5mm2. Shell material: all metal3. Process: black sandblasting4. Weight: 340gFunction parameter:1. CPU frequency: 580MHZ2. Memory: DDR1,64MB3. Flash memory: 16MB4. Wireless security: support the switch management of access permissions for the Internet of Things and shared disks, and support encryption security mechanisms such as WPA2-PSK/forced AES5. Support the largest hard disk: 6TB6. Support hard disk system: NTFS/FAT32/EXT47. Operating system: IOS Win XP / Vista / 7 Android MAC OS, LinuxWireless parameters:1. Wireless network standard: IEEE 802.11 b / g / n2. Network protocol: CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE3. The highest transmission rate: 300Mbps4. Channel: 1-135. Transmission power: 20dBm

Read more less

1) Suitable for 2.5 inches IDE/SATA HDD 2) Anti-vibration function for hard drive. 3) Material: Polypropylene 4) Product size: 115.1x86x34mm 5) Weight: 64g

Read more less

1. Brand new and high quality. 2. ORICO 2.5 inch SATA hard drive external enclosure. 3. Support 9.5mm and the following thickness 2.5 inch SATA HDD or SSD (Not included HDD / SSD). 4. Super speed USB3.0 interface, maximum Transfer Rates up to 5Gbps. 5. Galvanized steel panel and high quality plastic for the decent material, built-in foam cushion, offering great quality and durability. 6. Support Windows and MAC system, without using any drivers, support hot-swap 7. With portable, sleek advantage, 2.5-inch hard drives have been the subject of DIY enthusiasts alike, removable hard disk cartridge into more users to select storage devices. Storage-stability determines hard disk data safety, based on the original design, ORICO launches 2588US3 2.5 inch mobile hard disk box. Support tool-less quick install one 2.5-inch hard drives, while hard drive replacement is also easier, expanded storage simple convenience. 8. Not including SSD / SATA HDD

Read more less

Product Code：2020U3Material：PlasticColor：BlackOutput：USB3.0 Micro-BControl Scheme：NS1068X (5Gbps) Transfer Rate：5GbpsDimensions：130.8mm(L)*78mm(W)*15mm(H)Capacity：4TB Max Installation：Sliding CoverSystems：Windows / Mac / Linux

Read more less

1. Mobile storage, whatever you want2. Built-in hard disk interface M.2 M-Key3. Realtek RTL9210 high-speed master chip4. NVMe PCI-E hard disk protocol, support 10Gbps transmission rate (support 5Gbps transmission rate when using USB 3.0 data cable)5. Magnetic clamshell + PV buckle design, tool-free disassembly6. Cooling holes on both sides, effective heat dissipation, escort for high speed7. Aluminum alloy shell, compressive, wear-resistant, anti-corrosion, sturdy and durable8. Through this product, the high-speed M.2 solid-state drive can be connected to a computer or mobile phone and other multimedia devices, turning it into a high-speed mobileMobile hard drive (M.2 solid state drive is not included)9. Size: 114.8x31.4x10.8mmPacking list:Hard Disk Enclosure x 130cm Type-C to Type-C data cable x 130cm Type-C to USB 3.0 data cable x 1

Read more less

1. Material: PC+ABS2. Support capacity: 2TB3. Product size: 2.5 inch4. Transmission interface: USB3.1 Type-C5. Transmission speed: 5Gpbs6. Full screen sliding cover design, convenient and quick to load and unload7. Support 2.5-inch SATA hard drive or SSD solid state drive within 9.5mm thickness

Read more less

1. RTL9210 master chip2. For NVMe PCIe SSD3. Supports 2230/2242/2260/2280 size M-key PCIe NVMe SSD4. Full aluminum housing, magnetic protective cover5. External interface: USB3.0 type A direct plug interface is backward compatible with USB3.0 USB2.0 interface (supports USB2.0 and 3.0 interfaces, of course, if you connect 2.0, run 2.0 and then 3.0 run 3.0)(This data is for reference only) The actual read speed is mainly related to the SSD and the device. Different SSDs have the same device test. The test results are different.6. Compatible with all WINDOWS / Linux / Mac systems7. Plug and play, no drivers required. (Since it generates heat from the NVME SSD, the case may get a bit hot during operation.)

Read more less

1. Material: aluminum alloy2. Output interface: Thunderbolt 3 input/output interface x 2; USB3.1 Gen 2 Type Cx 2; USB3.1 Gen 2 A x 1; USB3.1 Gen 1 A x 2; USB2.0 A x 2; DP interface 1.4 x 1; RJ45 LAN Gigabit Ethernet port x 1; SD/TF card reader x 1; headphone output/microphone combo seat x 1; S/PDIF optical port x 13. Theoretical transmission rate: 40Gbps4. Power supply: 20V/3.25A 60W5. Support system: Windows 10 and above / Mac OS6. Fast transmission speed and stable performance7. Expandable to connect 3 Thunderbolt 3 devices8. Optical fiber interface, the sound quality is delicate and no noise9. Support multiple USB ports to use at the same time10. Anodized surface treatment, fast heat dissipation11. Dimensions: 146x107.1x47.5mm

Read more less

1. Compliant with USB3.2GEN2 standard, transmission speed 10Gbps, read and write speed 950MB/S2. Double gold-plated strips, multiple heat dissipation, protect the hard drive, transparent and thin shell, easy to take out heat3. The black aluminum fin pattern heat strip increases the heat conduction area, and the built-in heat dissipation silicone grease can quickly dissipate heat4. Small and portable, no burden, easy to carry when going out to work5. Tool-free installation, innovative sliding cover design, second hard drive replacement, easy replacement6. Using RTL9210B-CG QFN68 as the main chip, with strong performance, strong core sound, stable and fast transmission,7. Adapt to 4 different sizes of hard drives, Type-C interface, more convenient to read8. Intelligent hibernation, protect the hard disk and prolong the service life9. The blue indicator light is always on when standby, flashes when reading and writing, and the working status is clear at a glance10. Main control chip: RTL9210B11. Transmission rate: 10Gbps12. Support capacity: 2TB13. Built-in interface: Bkey/B&M key14. Input interface: USB-Type C15. Installation method: tool-free, sliding cover installation16. Material: aluminum alloy + transparent PC17. Support system: Windows / for Mac Os / Android18. Packing list: color box + A to C wiring + C to C wiring + manual19. Size: 11x1.5x 3.5cm

Read more less

1. Grid texture, business style2. 3 minutes intelligent sleep, energy saving and environmental protection3. Dual LED light indication, power blue light and signal green light4. Support UASP acceleration5. After the hard disk is safely removed, the hard disk will hibernate immediately to better protect the mechanical parts of the hard disk6. Support USB hot plug, plug and play, no need to install drivers7. Installation method: sliding cover installation8. Applicable specifications: 7/9.5mm hard drive9. Wire length: 40cm10. Output interface: USB3.0 Micro B11. Material: ABS12. Size: 7.9x12.5x1.3cm13. Weight: 100g

Read more less

1. All aluminum heat dissipation, screw-free installation, easy operation2. High-speed shipping, plug and play3. Support capacity: 6TB4. Support system: Windows / for Mac Os / Linux / Chrome Os5. Material: aluminum alloy6. Transmission speed: 10Gbps7. Line length: 40cm8. Dimensions: 109x41x12mm

Read more less

1. All aluminum heat dissipation, screw-free installation, easy operation2. High-speed shipping, plug and play3. Support capacity: 6TB4. Support system: Windows / for Mac Os / Linux / Chrome Os5. Material: aluminum alloy6. Transmission speed: 10Gbps7. Line length: 40cm8. Dimensions: 109x41x12mm

Read more less

1. A large-capacity mobile storage device for high-speed data exchange with a computer through a USB port, which can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports the USB3.2 GEN2 standard and is compatible with connections such as USB3.2 GEN1/USB 2.0.2. Supported operating systems: Windows XP or above, Linux Fedora FC8 or above, MAC OS 10.6.2 or above3. USB3.2 GEN 2 (10Gbps) high-speed mobile hard disk enclosure4. Support FAT32/NTFS/EXT4/EXFAT and other disk formats for data reading and writing5. It can support 2 M.2 (NVME) hard disks to read and write at the same time6. Support offline one-click clone7. Plug and play, no need to install drivers, support hot swap Structure introduction:1. M.2 slot: M.2 hard disk socket supports M_Key hard disk insertion2. Hard disk indicator: After the corresponding hard disk is inserted normally and correctly identified after power-on, the LED light will light up, and the read and write disk LED light will flash.3. Clone switch: long press the clone switch for 3-5 seconds and release, the product will enter the clone working mode4. Clone progress lights: 4 green clone progress lights, showing (25%-50%-75%-100%) cloning progress respectively5. DC power input port: DC12V/3A power input port, supply power to the whole machine6. TYPE-C female socket: USB data port used to connect PC, maximum support 10Gbps data transmission bandwidth7. Self-locking power switch: the main power switch, press it to turn on the power, and press the switch again to pop up to power off the whole machine

Read more less

1. A large-capacity mobile storage device for high-speed data exchange with a computer through a USB port, which can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports the USB3.2 GEN2 standard and is compatible with connections such as USB3.2 GEN1/USB 2.0.2. Supported operating systems: Windows XP or above, Linux Fedora FC8 or above, MAC OS 10.6.2 or above3. USB3.2 GEN 2 (10Gbps) high-speed mobile hard disk enclosure4. Support FAT32/NTFS/EXT4/EXFAT and other disk formats for data reading and writing5. It can support 2 M.2 (NVME) hard disks to read and write at the same time6. Support offline one-click clone7. Plug and play, no need to install drivers, support hot swap Structure introduction:1. M.2 slot: M.2 hard disk socket supports M_Key hard disk insertion2. Hard disk indicator: After the corresponding hard disk is inserted normally and correctly identified after power-on, the LED light will light up, and the read and write disk LED light will flash.3. Clone switch: long press the clone switch for 3-5 seconds and release, the product will enter the clone working mode4. Clone progress lights: 4 green clone progress lights, showing (25%-50%-75%-100%) cloning progress respectively5. DC power input port: DC12V/3A power input port, supply power to the whole machine6. TYPE-C female socket: USB data port used to connect PC, maximum support 10Gbps data transmission bandwidth7. Self-locking power switch: the main power switch, press it to turn on the power, and press the switch again to pop up to power off the whole machine

Read more less

1. A large-capacity mobile storage device for high-speed data exchange with a computer through a USB port, which can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports the USB3.2 GEN2 standard and is compatible with connections such as USB3.2 GEN1/USB 2.0.2. Supported operating systems: Windows XP or above, Linux Fedora FC8 or above, MAC OS 10.6.2 or above3. USB3.2 GEN 2 (10Gbps) high-speed mobile hard disk enclosure4. Support FAT32/NTFS/EXT4/EXFAT and other disk formats for data reading and writing5. It can support 2 M.2 (NVME) hard disks to read and write at the same time6. Support offline one-click clone7. Plug and play, no need to install drivers, support hot swap Structure introduction:1. M.2 slot: M.2 hard disk socket supports M_Key hard disk insertion2. Hard disk indicator: After the corresponding hard disk is inserted normally and correctly identified after power-on, the LED light will light up, and the read and write disk LED light will flash.3. Clone switch: long press the clone switch for 3-5 seconds and release, the product will enter the clone working mode4. Clone progress lights: 4 green clone progress lights, showing (25%-50%-75%-100%) cloning progress respectively5. DC power input port: DC12V/3A power input port, supply power to the whole machine6. TYPE-C female socket: USB data port used to connect PC, maximum support 10Gbps data transmission bandwidth7. Self-locking power switch: the main power switch, press it to turn on the power, and press the switch again to pop up to power off the whole machine

Read more less

1. Material: aluminum alloy + ABS2. External interface: USB-C3. Built-in interface: M.2M-KEY4. Theoretical transmission speed: 10Gbps5. Cable: USB-C to USB-C / USB to USB-C6. Cable length: 250mm7. Product size: 112x36x12mm

Read more less

1. This mobile hard disk enclosure is a large-capacity mobile storage device for high-speed data exchange with a computer through a USB port. It can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports USB3.1 GEN2 standard and is compatible with USB3.1GEN1/USB2.0 and other connections. This product can realize plug and play under the supported operating systems without installing drivers, and supports hot swapping! 2. Supported operating systems: Microsoft Windows XP or above/Linux Fedora FC8 or above/MAC OS 10.6.2 or above 3. Product Features - USB3.1 GEN 2 (10Gbps) high-speed mobile hard disk enclosure - Supports data reading and writing on disks with disk formats such as FAT32/NTFS/EXT4/EXFAT - Supports 2 M.2 (NVME) hard drives to read and write at the same time - Support offline one-click clone 4. Product Structure - TYPE-C port: USB3.1/GEN2/10Gbps data transmission port, the computer can read and write two disks through this USB port - Power supply port: DC 12V/3A power input port - Clone switch: Press and hold the clone switch for 3-5 seconds to release, the product will enter the clone mode - Disk 2 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 2 - Clone indicator: 4 green clone progress indicators, showing (25%-50%-75%-100%) cloning progress respectively - Disk 1 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 1 - Disk 2: M/B&M (NVME) hard disk can be inserted, support 2230, 2242, 2260, 2280 four kinds of hard disks, support 4T hard disk - Disk 1: M/B&M (NVME) hard disk can be inserted, it supports 2230, 2242, 2260, 2280 four kinds of hard disks, and supports 4T hard disk 5. Product size: 111.7x44x15mm

Read more less

1. This mobile hard disk enclosure is a large-capacity mobile storage device for high-speed data exchange with a computer through a USB port. It can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports USB3.1 GEN2 standard and is compatible with USB3.1GEN1/USB2.0 and other connections. This product can realize plug and play under the supported operating systems without installing drivers, and supports hot swapping! 2. Supported operating systems: Microsoft Windows XP or above/Linux Fedora FC8 or above/MAC OS 10.6.2 or above 3. Product Features - USB3.1 GEN 2 (10Gbps) high-speed mobile hard disk enclosure - Supports data reading and writing on disks with disk formats such as FAT32/NTFS/EXT4/EXFAT - Supports 2 M.2 (NVME) hard drives to read and write at the same time - Support offline one-click clone 4. Product Structure - TYPE-C port: USB3.1/GEN2/10Gbps data transmission port, the computer can read and write two disks through this USB port - Power supply port: DC 12V/3A power input port - Clone switch: Press and hold the clone switch for 3-5 seconds to release, the product will enter the clone mode - Disk 2 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 2 - Clone indicator: 4 green clone progress indicators, showing (25%-50%-75%-100%) cloning progress respectively - Disk 1 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 1 - Disk 2: M/B&M (NVME) hard disk can be inserted, support 2230, 2242, 2260, 2280 four kinds of hard disks, support 4T hard disk - Disk 1: M/B&M (NVME) hard disk can be inserted, it supports 2230, 2242, 2260, 2280 four kinds of hard disks, and supports 4T hard disk 5. Product size: 111.7x44x15mm

Read more less

1. This mobile hard disk enclosure is a large-capacity mobile storage device for high-speed data exchange with a computer through a USB port. It can be used for desktop computers or notebook computers with USB ports and other devices that support USB. Supports USB3.1 GEN2 standard and is compatible with USB3.1GEN1/USB2.0 and other connections. This product can realize plug and play under the supported operating systems without installing drivers, and supports hot swapping! 2. Supported operating systems: Microsoft Windows XP or above/Linux Fedora FC8 or above/MAC OS 10.6.2 or above 3. Product Features - USB3.1 GEN 2 (10Gbps) high-speed mobile hard disk enclosure - Supports data reading and writing on disks with disk formats such as FAT32/NTFS/EXT4/EXFAT - Supports 2 M.2 (NVME) hard drives to read and write at the same time - Support offline one-click clone 4. Product Structure - TYPE-C port: USB3.1/GEN2/10Gbps data transmission port, the computer can read and write two disks through this USB port - Power supply port: DC 12V/3A power input port - Clone switch: Press and hold the clone switch for 3-5 seconds to release, the product will enter the clone mode - Disk 2 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 2 - Clone indicator: 4 green clone progress indicators, showing (25%-50%-75%-100%) cloning progress respectively - Disk 1 indicator: The blue LED will light up when the disk is inserted and work correctly, and the LED will flash when the USB port reads and writes disk 1 - Disk 2: M/B&M (NVME) hard disk can be inserted, support 2230, 2242, 2260, 2280 four kinds of hard disks, support 4T hard disk - Disk 1: M/B&M (NVME) hard disk can be inserted, it supports 2230, 2242, 2260, 2280 four kinds of hard disks, and supports 4T hard disk 5. Product size: 111.7x44x15mm

Read more less

1. Tool- Free design allow to mount Drive in 3 seconds without tools and screws, allow to access multi drives external easily 2. Super speed USB3.0 offer transfer rates up to 5Gbps, 10X faster than USB2.0 3. Fit for 7mm to 9.5mm Slim 2.5 inch SATA I, SATA II and SATA III hard disk drive or solid state disk 4. Compatible with any USB 3.0 or USB 2.0 host of any Windows, Macintosh, Linux or Unix Desktop or Laptop 5. Plug and play compatible, USB self-powered, no reboot and additional power adapter or driver is needed 6. Compatible with Windows 2000/Windows 98/ XP /Vista/ 7/ 8/10,Linux,Mac OS 9.1/10.8.4 above 7. Compatible with any 7mm to 9.5mm Slim 2.5 inch SATA HDD or SSD up to 2TB 8. Size:13x8x1.4cm 9. Output interface: USB 3.0, Micro B 10. Length of data cable: 35cm 11. Material: ABS

Read more less

1. Tool- Free design allow to mount Drive in 3 seconds without tools and screws, allow to access multi drives external easily 2. Super speed USB3.0 offer transfer rates up to 5Gbps, 10X faster than USB2.0 3. Fit for 7mm to 9.5mm Slim 2.5 inch SATA I, SATA II and SATA III hard disk drive or solid state disk 4. Compatible with any USB 3.0 or USB 2.0 host of any Windows, Macintosh, Linux or Unix Desktop or Laptop 5. Plug and play compatible, USB self-powered, no reboot and additional power adapter or driver is needed 6. Compatible with Windows 2000/Windows 98/ XP /Vista/ 7/ 8/10,Linux,Mac OS 9.1/10.8.4 above 7. Compatible with any 7mm to 9.5mm Slim 2.5 inch SATA HDD or SSD up to 2TB 8. Size:13x8x1.4cm 9. Output interface: USB 3.0, Micro B 10. Length of data cable: 35cm 11. Material: ABS

Read more less

1. Material:Aluminum Alloy + Built-in aluminum alloy heatsink2. Color:Grey/Silver/Gold3. Dimension:107(L)x29mm(W)x12.5mm(H)4. Transmission Rate:10Gbps5. Output Interface:USB3.2 Gen2 Type-C6. Support Capacity:4TB Max7. Compatible SSD:M.2 NGFF SATA 2230, 2242, 2260, 22808. Installation:Fixed by Screws9. Data Cable:Type-C to Type-C/USB-A, 30Cm10. Supported System:Windows/Mac OS/Linux11. Net Weight :140g

Read more less

1. Material:Aluminum Alloy + Built-in aluminum alloy heatsink2. Color:Grey/Silver/Gold3. Dimension:107(L)x29mm(W)x12.5mm(H)4. Transmission Rate:10Gbps5. Output Interface:USB3.2 Gen2 Type-C6. Support Capacity:4TB Max7. Compatible SSD:M.2 NGFF SATA 2230, 2242, 2260, 22808. Installation:Fixed by Screws9. Data Cable:Type-C to Type-C/USB-A, 30Cm10. Supported System:Windows/Mac OS/Linux11. Net Weight :140g

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Color:Grey/Silver/Gold3.Dimension:108*50*17MM4.Transmission Rate:40Gbps5.Output Interface:USB4 Type-C6.Support Capacity:4TB Max7.Compatible SSD:M.2 NGFF SATA 2230, 2242, 2260, 22808.Installation:Fixed by Screws9.Data Cable:Type-C to Type-C/USB-A, 30Cm10.Supported System:Windows/Mac OS/Linux11.Net Weight:185g

Read more less

1. Material:Aluminum Alloy + Built-in aluminum alloy heatsink2. Color:Grey/Silver/Gold3. Dimension:107(L)x29mm(W)x12.5mm(H)4. Transmission Rate:10Gbps5. Output Interface:USB3.2 Gen2 Type-C6. Support Capacity:4TB Max7. Compatible SSD:M.2 NGFF SATA 2230, 2242, 2260, 22808. Installation:Fixed by Screws9. Data Cable:Type-C to Type-C/USB-A, 30Cm10. Supported System:Windows/Mac OS/Linux11. Net Weight :140g

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Color:Silver/Gold3.Dimension:109(L)*30mm(W)*13.2mm(H)4.Input Interface:M-Key/B&M-Key5.Output Interface:Type-C(USB3.2 Gen2)6.Transmission Rate:10Gbps7.Installation:fixed by screws8.Support Capacity:4TB Max9.Accessories:Cooling silicone*1, silicone plug*2, Heatsink*110.Supported System:Windows/Mac OS/Linux11.Data Cable:Type-C/Male to Type-A/Male+Type-C/Male(2 in 1), 0.3m12.LED indicator:monitor state of the SSD13.Compatible: M.2 NVMe/NGFF(SATA) 2230, 2242, 2260, 2280 four different specifications of SSD14.Support: NVMe/NGFF(SATA) dual protocol and UASP acceleration protocol15.Compatible with PC, laptop, smart TV, smart router, PS4 and other devices16.Support:enter sleep state after 10 minutes of idle time

Read more less

1. Material: Aluminium alloy2. Color: Silver / Gold / Grey3. Dimension: 107.5*29.5*124. Input interface: B-Key/B&M-Key5. Output interface: Type-C6. Transimisson data: 6Gbps7. Data cable: Type-C to Type-C/USB-A length 30cm8. Capacity support : Maximum 4TB 9. Installation method: Screw fixation10. System support Windows / Mac OS/ Linux

Read more less

1.Material:ABS+Aluminum Alloy2.Transmission Rate:5Gbps3.Color:Black4.Dimensions:128mm(L)*80mm(W)*14mm(H)5.Output Interface:USB3.0 Micro-B6.Support Capacity:4TB Max7.Compatible SSD:2.5" SATA HDD/SSD with thickness 7mm-9.5mm8.Installation:Tool-free9.Data Cable:USB Micro-B/Male to USB Type-A/Male, 0.5m10.Supported System:Windows/Mac OS/Linux

Read more less

1.Material:ABS+Aluminum Alloy2.Transmission Rate:5Gbps3.Color:Black4.Dimensions:128mm(L)*80mm(W)*14mm(H)5.Output Interface:USB3.0 Micro-B6.Support Capacity:4TB Max7.Compatible SSD:2.5" SATA HDD/SSD with thickness 7mm-9.5mm8.Installation:Tool-free9.Data Cable:USB Micro-B/Male to USB Type-A/Male, 0.5m10.Supported System:Windows/Mac OS/Linux

Read more less

1.Material:Aluminium alloy2.Color:Silver / Gold / Grey3.Dimension:115*40*15mm4.Input Interface:M-Key/B&M-Key5.Output interface:Type-C6.Transimisson data:20Gbps7.Data cable:Type-C to Type-C/USB-A length 30cm8.Compatible SSD:M.2 NVMe 2230, 2242, 2260, 22809.Capacity support:Maximum 4TB 10.Installation method:Screw fixation11.System support Windows / Mac OS/ Linux12.Net weight:175g

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Dimension:109(L)*30mm(W)*13.2mm(H)3.Color:Gold/Grey4.Input Interface:M-Key/B&M-Key5.Transmission Rate:10Gbps6.Support Capacity:4TB Max7.Data Cable:Type-C to Type-C/USB-A 0.3m8.Support:M.2 NVMe 2230, 2242, 2260, 2280 four different specifications of SSD

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Color:Silver/Gold3.Dimension:109(L)*30mm(W)*13.2mm(H)4.Input Interface:M-Key/B&M-Key5.Output Interface:Type-C(USB3.2 Gen2)6.Transmission Rate:10Gbps7.Installation:fixed by screws8.Support Capacity:4TB Max9.Accessories:Cooling silicone*1, silicone plug*2, Heatsink*110.Supported System:Windows/Mac OS/Linux11.Data Cable:Type-C/Male to Type-A/Male+Type-C/Male(2 in 1), 0.3m12.LED indicator:monitor state of the SSD13.Compatible: M.2 NVMe/NGFF(SATA) 2230, 2242, 2260, 2280 four different specifications of SSD14.Support: NVMe/NGFF(SATA) dual protocol and UASP acceleration protocol15.Compatible with PC, laptop, smart TV, smart router, PS4 and other devices16.Support:enter sleep state after 10 minutes of idle time

Read more less

1. Material: Aluminium alloy2. Color: Silver / Gold / Grey3. Dimension: 107.5*29.5*124. Input interface: B-Key/B&M-Key5. Output interface: Type-C6. Transimisson data: 6Gbps7. Data cable: Type-C to Type-C/USB-A length 30cm8. Capacity support : Maximum 4TB 9. Installation method: Screw fixation10. System support Windows / Mac OS/ Linux

Read more less

1. Material: ABS+Aluminum Alloy2. Transmission Rate: 6Gbps3. Color: Black4. Dimensions: 128mm(L)*80mm(W)*14mm(H)5 .Output Interface: USB3.1 Gen1 Type-C6. Support Capacity: 4TB Max7. Compatible SSD: 2.5" SATA HDD/SSD with thickness 7mm-9.5mm8. Installation: Tool-free9. Data Cable: USB Type-A/Male to USB Type-C/Male, 0.5m10. Supported System: Windows/Mac OS/Linux

Read more less

1.Material:ABS+Aluminum Alloy2.Transmission Rate:6Gbps3.Color:Black4.Dimensions:184.4mm(L)*120mm(W)*31mm(H)5.Output Interface:USB3.1 Gen1 Type-C6.Support Capacity:18TB Max7.Compatible SSD:3.5" SATA HDD/SSD8.Installation:Tool-free9.Data Cable:USB Type-A/Male to USB Type-C/Male, 1m10.Supported System:Windows/Mac OS/Linux11.Power Supply:12V2A Power Adapter

Read more less

1.Material:Aluminium alloy2.Color:Silver / Gold / Grey3.Dimension:115*40*15mm4.Input Interface:M-Key/B&M-Key5.Output interface:Type-C6.Transimisson data:20Gbps7.Data cable:Type-C to Type-C/USB-A length 30cm8.Compatible SSD:M.2 NVMe 2230, 2242, 2260, 22809.Capacity support:Maximum 4TB 10.Installation method:Screw fixation11.System support Windows / Mac OS/ Linux12.Net weight:175g

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink + Sandblasted anodizing2.Dimension:107(L)*50mm(W)*17mm(H)3.Color:Gray/Gold4.Input Interface:Type-C5.Transmission Rate:40Gbps; Fully compatible with Thunderbolt 3/Thunderbolt 4 and USB3.2/3.1/3.0/Type-C transmission protocol (not compatible with USB2.0 and below)6.Support Capacity:4TB Max7. Cable:Type-C to Type-C/USB-A, 30Cm8.Support:2280 M.2 M-Key NVMe SSD

Read more less

1.Material:aluminum alloy + built-in aluminum alloy heatsink2.Color:Gray/Silver/Gold3.Dimension:107(L)*29.5mm(W)*12mm(H)4.Input Interface:M-Key/B&M-Key5.Output Interface:Type-C(USB3.2 Gen2)6.Transmission Rate:10Gbps7.Installation:fixed by screws8.Support Capacity:4TB Max9.Accessories:Cooling silicone*1, silicone plug*2, Heatsink*110.Supported System:Windows/Mac OS/Linux11.Data Cable:Type-C/Male to Type-A/Male+Type-C/Male(2 in 1), 0.3m12.LED indicator:monitor state of the SSD13.Compatible:M.2 NVMe/NGFF(SATA) 2230, 2242, 2260, 2280 four different specifications of SSD14.Support:NVMe/NGFF(SATA) dual protocol and UASP acceleration protocol15.Compatible with PC, laptop, smart TV, smart router, PS4 and other devices16.Support:enter sleep state after 10 minutes of idle time

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Dimension:113.5(L)*40mm(W)*14mm(H)3.Color:Silver/Gold4.Input Interface:M-Key/B&M-Key5.Output Interface:Type-C6.Transmission Rate:20Gbps7.Support Capacity:4TB Max8.Data Cable:Type-C/Male to Type-A/Male+Type-C/Male(2 in 1), 0.3m9.Accessories:Cooling silicone*1, silicone plug*2, Heatsink*1

Read more less

1.Material:Aluminum Alloy + Built-in aluminum alloy heatsink2.Dimension:113.5(L)*40mm(W)*14mm(H)3.Color:Silver/Gold4.Input Interface:M-Key/B&M-Key5.Output Interface:Type-C6.Transmission Rate:20Gbps7.Support Capacity:4TB Max8.Data Cable:Type-C/Male to Type-A/Male+Type-C/Male(2 in 1), 0.3m9.Accessories:Cooling silicone*1, silicone plug*2, Heatsink*1

Read more less

1.Material:Aluminium alloy2.Color:Silver / Rose Gold / Gray3.Dimension:113.5*40*14mm4.Output interface:Type-C5.Transimisson data:20Gbps6.Data cable:Type-C to Type-C/USB-A, 30cm7.Capacity support:Maximum 4TB 8.Installation method:Screw fixation9.System support:Windows / Mac OS/ Linux

Read more less

1.Material:Aluminium alloy2.Color:Silver / Gold / Grey3.Dimension:115*40*15mm4.Input Interface:M-Key/B&M-Key5.Output interface:Type-C6.Transimisson data:20Gbps7.Data cable:Type-C to Type-C/USB-A length 30cm8.Compatible SSD:M.2 NVMe 2230, 2242, 2260, 22809.Capacity support:Maximum 4TB 10.Installation method:Screw fixation11.System support Windows / Mac OS/ Linux12.Net weight:175g

Read more less

1. Material: Aluminium alloy2. Color: Silver / Gold / Grey3. Dimension: 107.5*29.5*124. Input interface: B-Key/B&M-Key5. Output interface: Type-C6. Transimisson data: 6Gbps7. Data cable: Type-C to Type-C/USB-A length 30cm8. Capacity support : Maximum 4TB 9. Installation method: Screw fixation10. System support Windows / Mac OS/ Linux

Read more less