Infinix Replacement Parts

450 products


  • Charging Port Board for Infinix Note 7 X690B X690-garmade.com

    For Infinix Note 7 X690B X690 Charging Port Board

    1. Charging port board replacement for Infinix Note 7 X690B X690. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    28,08 zł

  • For Infinix Hot 10 Play/Smart 5 India X688C X688 Charging Port Board-garmade.com

    For Infinix Hot 10 Play/Smart 5 India X688C X688 Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    29,64 zł

  • SPS1344.jpg@ad8b4ecc71d42d6e805f5b301f0764e2

    TFT LCD Screen for Infinix Hot 8 X650C, X650B, X650, X650D with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 8 X650C, X650B, X650, X650D 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    66,94 zł

  • EDA006161310.jpg@dd96b091472120ce1a17313c9a965bb1

    For Infinix Hot 40i X6528B OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Infinix:  Hot 40i Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs 40HQ: 1194 cartons * 66 pcs = 78804 pcs

    79,55 zł

  • EDA005072015.jpg@3720f14a0e8b30d697a78015bd2dd61b

    For Infinix Smart 7 X6515 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    27,60 zł

  • EDA005072010.jpg@b53b264a296a347d7723c130446c3f14

    For Infinix Hot 11 X662 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    29,38 zł

  • EDA005072003.jpg@6622133d67f4f651f10c41ea00bad29b

    For infinix Hot 20i OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    31,43 zł

  • EDA005072004.jpg@6622133d67f4f651f10c41ea00bad29b

    For infinix Smart 6 HD OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    31,60 zł

  • EDA005072002.jpg@61ecc4e0200ac9698730d8d2bc43b9de

    For infinix Hot 11 Play OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    31,34 zł

  • OEM LCD Screen For Infinix Smart 7 HD X6516 with Digitizer Full Assembly-garmade.com

    OEM LCD Screen For Infinix Smart 7 HD X6516 with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    72,03 zł

  • OEM LCD Screen For infinix Note 8 X692 Digitizer Full Assembly with Frame-garmade.com

    OEM LCD Screen For infinix Note 8 X692 Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for infinix Note 8 X692 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    113,49 zł

  • For Infinix Hot 10s/10s NFC/10T OEM Charging Port Board-garmade.com

    For Infinix Hot 10s/10s NFC/10T OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    27,43 zł

  • LCD Screen and Digitizer Full Assembly for Infinix Hot 10i X659B, PR652B, X658E-garmade.com

    LCD Screen and Digitizer Full Assembly for Infinix Hot 10i X659B, PR652B, X658E

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 10i X659B, PR652B, X658E 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    68,50 zł

  • For Infinix Note 10 X693 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)-garmade.com

    For Infinix Note 10 X693 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Note 10 X693. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    26,04 zł

  • TFT LCD Screen For Infinix Hot 12 / Hot 12 Play X6817 / Note 12i with Digitizer Full Assembly-garmade.com

    TFT LCD Screen For Infinix Hot 12 / Hot 12 Play X6817 / Note 12i with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 12 / Hot 12 Play X6817 / Note 12i 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    80,81 zł

  • For Infinix Hot 10 Lite X657B Charging Port Board-garmade.com

    For Infinix Hot 10 Lite X657B Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    27,38 zł

  • SPS2425.jpg@e68e4fe00d2e81a1a767abef84332a93

    LCD Screen and Digitizer Full Assembly for Infinix Note 7 X690B, X690

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Note 7 X690B, X690 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    102,80 zł

  • Charging Port Board for Infinix Hot 9 Play X680 X680B-garmade.com

    For Infinix Hot 9 Play X680 X680B Charging Port Board

    1. Charging port board replacement for Infinix Hot 9 Play X680 X680B. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    27,43 zł

  • SPS1349.jpg@0e8e28695ee3d352baea90a731364b89

    LCD Screen and Digitizer Full Assembly for Infinix Smart 5 / Hot 10 Lite X657,X657B, X657C

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Smart 5 / Hot 10 Lite X657,X657B, X657C 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    69,85 zł

  • SPS1351.jpg@8a9c137b180245251977270559e4a62d

    LCD Screen and Digitizer Full Assembly for Infinix Note 8i X683

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Note 8i X683 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    79,72 zł

  • SPS7768JL.jpg@07ed24d43c31ebeeb3e395bc8f4fd719

    For Infinix Note 30 Pro 4G X678B Battery Back Cover(Gold)

    1. Back cover replacement for Infinix Note 30 Pro 4G X678B 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch Qty per Carton 40 Carton Weight 2.52kgs / 5.56lb Carton Size 47cm * 31cm * 32cm / 18.5inch * 12.2inch * 12.6inch Loading Container 20GP: 571 cartons * 40 pcs = 22840 pcs 40HQ: 1327 cartons * 40 pcs = 53080 pcs

    62,90 zł

  • SPS7469TT.jpg@6210ecd777e3eb8b97beb928c73443cd

    For Infinix Smart 6 HD X6512 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Baby Blue)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Smart 6 HD X6512. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • EDA006161005.jpg@b3b9a03d11aa419af815788c5bd0376a

    For Infinix Note 30 Pro X678B OLED LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    306,14 zł

  • EDA006161008.jpg@80e0eb1991e24337dc8ca3a4043235b4

    For Infinix Zero 30 5G X6731 Original OLED LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    398,47 zł

  • EDA005072011.jpg@3cc15fc9dce1cec499eee4170583cab7

    For Infinix Note 11 X663 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    30,82 zł

  • SPS7467B.jpg@40ee3c6c2047918b7de97b08dd1c1451

    For Infinix Hot 11 Play SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Hot 11 Play. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • SPS7461L.jpg@2520cb1133de5cd00282bbd66c5ef843

    For Infinix Zero X Pro X6810 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Blue)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Zero X Pro X6810. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,65 zł

  • SPS7475J.jpg@5c2baca9e6e995c729785e59df672ced

    For Infinix Zero 20 X6821 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Gold)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Zero 20 X6821. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • SPS7483B.jpg@806122e6d8d2e3d8193abb3a9f18057a

    For Infinix Smart 7 HD X6516 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Smart 7 HD X6516. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,69 zł

  • SPS7484L.jpg@916988de37729c141cfda6f9f86dd93b

    For Infinix Note 30i X6716 SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Blue)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Note 30i X6716. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • For Infinix Smart HD 2021 X612B OEM Charging Port Board-garmade.com

    For Infinix Smart HD 2021 X612B OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    29,78 zł

  • For Infinix Note 11 Pro x697 10pcs Back Camera Lens-garmade.com

    For Infinix Note 11 Pro x697 10pcs Back Camera Lens

    1. Replacement back camera lens.2. Replace the old, broken, cracked, damaged one.3. Completely fit and work.4. Each item has been checked and in good condition before shipping.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    35,73 zł

  • LCD Screen and Digitizer Full Assembly for Infinix Note 8 X692-garmade.com

    LCD Screen and Digitizer Full Assembly for Infinix Note 8 X692

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Note 8 X692 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    99,89 zł

  • OEM LCD Screen For infinix Smart 4 / 4C X653 Digitizer Full Assembly with Frame-garmade.com

    OEM LCD Screen For infinix Smart 4 / 4C X653 Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for infinix Smart 4 / 4C X653 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    84,63 zł

  • OEM LCD Screen For infinix Hot 10 Play/Smart 5 India Digitizer Full Assembly with Frame-garmade.com

    OEM LCD Screen For infinix Hot 10 Play/Smart 5 India Digitizer Full Assembly with Frame

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for infinix Hot 10 Play/Smart 5 India 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    100,93 zł

  • For Infinix Smart 5 Pro OEM Power Button & Volume Button Flex Cable-garmade.com

    For Infinix Smart 5 Pro OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • For Infinix S5 Pro OEM Power Button & Volume Button Flex Cable-garmade.com

    For Infinix S5 Pro OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • For Infinix S5 / S5 Lite X652 OEM Power Button & Volume Button Flex Cable-garmade.com

    For Infinix S5 / S5 Lite X652 OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • For Infinix Hot 11s X6812 OEM Power Button & Volume Button Flex Cable-garmade.com

    For Infinix Hot 11s X6812 OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • LCD Screen and Digitizer Full Assembly for Infinix Hot 10T X689C-garmade.com

    LCD Screen and Digitizer Full Assembly for Infinix Hot 10T X689C

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 10T X689C 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    79,33 zł

  • LCD Screen and Digitizer Full Assembly for Infinix Hot 11s X6812-garmade.com

    LCD Screen and Digitizer Full Assembly for Infinix Hot 11s X6812

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 11s X6812 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    96,93 zł

  • TFT LCD Screen for Infinix Hot 11/Spark 8T KG6p X662 with Digitizer Full Assembly-garmade.com

    TFT LCD Screen for Infinix Hot 11/Spark 8T KG6p X662 with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 11/Spark 8T KG6p X662 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    74,37 zł

  • LCD Screen and Digitizer Full Assembly for Infinix Hot 10s / Hot 10s NFC-garmade.com

    LCD Screen and Digitizer Full Assembly for Infinix Hot 10s / Hot 10s NFC

    About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Hot 10s / Hot 10s NFC X689B, X689, X689D 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

    79,33 zł

  • For Infinix Smart 5/Hot 10 Lite 10 PCS Charging Port Connector-garmade.com

    For Infinix Smart 5/Hot 10 Lite 10 PCS Charging Port Connector

    1. Charging port connector for Infinix Smart 5/Hot 10 Lite. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    29,64 zł

  • For Infinix Hot 10 X682B X682C SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)-garmade.com

    For Infinix Hot 10 X682B X682C SIM Card Tray + SIM Card Tray + Micro SD Card Tray (Black)

    1. SIM card tray + SIM card tray + Micro SD card tray for Infinix Hot 10 X682B X682C. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

    24,56 zł

  • AMOLED LCD Screen For Infinix Note 12 G96 X670 / Note 12 4G / Note 12 VIP / Note 12 5G / Note 12 Pro 5G / Note 12 Pro with Digitizer Full Assembly-garmade.com

    AMOLED LCD Screen For Infinix Note 12 G96 X670 / Note 12 4G / Note 12 VIP / Note 12 5G / Note 12 Pro 5G / Note 12 Pro with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for For Infinix Note 12 G96 X670 / Note 12 4G / Note 12 VIP / Note 12 5G / Note 12 Pro 5G / Note 12 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    240,81 zł

  • TFT LCD Screen For Infinix Note 11i with Digitizer Full Assembly-garmade.com

    TFT LCD Screen For Infinix Note 11i with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Infinix Note 11i 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

    98,50 zł

  • For Infinix Note 10 X693 Charging Port Board-garmade.com

    For Infinix Note 10 X693 Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

    27,21 zł

Login

Forgot your password?

Don't have an account yet?
Create account