CN Warehouses

334532 products


  • EDA006584603.jpg@fd7cb7fd1c6b7444dcfa559125790a13

    For Motorola Moto G54 OEM Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with Motorola:  Moto G54 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 30cm * 32cm * 32cm / 11.81inch * 12.6inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    35,90 zł

  • EDA006581801.jpg@32e18fd4247e7607ca72876c0e09d3f7

    For Huawei Watch GT 3 42mm Heart Rate Monitor Sensor

    1. Heart rate monitor sensor replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Please check if this sensor is suitable for your Watch before bidding.Specification: General Compatible with Huawei:  Watch GT 3 42mm Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 30cm * 32cm * 32cm / 11.81inch * 12.6inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    67,44 zł

  • EDA006581802.jpg@c53cdd6efaffbaafb4b23d68f7a4640f

    For Huawei Watch GT 3 46mm Heart Rate Monitor Sensor

    1. Heart rate monitor sensor replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Please check if this sensor is suitable for your Watch before bidding.Specification: General Compatible with Huawei:  Watch GT 3 46mm Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 30cm * 32cm * 32cm / 11.81inch * 12.6inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    73,63 zł

  • EDA004795014.jpg@d3efb79f034dc544017b9dc7963ebf52

    For Motorola Moto G54 OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Motorola:  Moto G54 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    24,75 zł

  • SPS7984LL.jpg@7cd3f75e9e85f3040e4575c80e6e7980

    For Google Pixel 8a Original Battery Back Cover with Camera Lens Cover(Blue)

    1. Back cover replacement for Google Pixel 8a 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts Specification: General Compatible with Google:  Pixel 8a Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch Qty per Carton 40 Carton Weight 2.08kgs / 4.59lb Carton Size 47cm * 31cm * 32cm / 18.5inch * 12.2inch * 12.6inch Loading Container 20GP: 571 cartons * 40 pcs = 22840 pcs 40HQ: 1327 cartons * 40 pcs = 53080 pcs

    73,93 zł

  • EDA004795015.jpg@970a1a325ffddf3619d0f4ba53d97590

    For Motorola Moto G84 OEM Power Button & Volume Button Flex Cable

    1. Volume button & power button flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Motorola:  Moto G84 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    24,70 zł

  • EDA006471605.jpg@8829e795a0a4ed630247409221a8f9eb

    For Motorola Moto G84 OEM Motherboard Flex Cable

    1. Motherboard flex cable replacement part.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Motorola:  Moto G84 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 32cm * 30cm * 27cm / 12.6inch * 11.81inch * 10.63inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    31,02 zł

  • EDA006584904.jpg@48bc8c372a9ba49973873148c8353f8d

    For CAT S62 Pro LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with CAT:  S62 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    153,23 zł

  • EDA006584901.jpg@d1e0b94fe22e143388c649c8c0cb38cb

    For CAT S75 LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with CAT:  S75 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    276,48 zł

  • SPS8021G.jpg@a1e37f746041a520548afdd0a39328da

    For HTC U20 5G SIM Card Tray + SIM / Micro SD Card Tray (Green)

    1. SIM card tray + SIM card tray / Micro SD card tray for HTC U20 5G. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with HTC:  U20 5G Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 27cm * 30cm / 12.6inch * 10.63inch * 11.81inch Loading Container 20GP: 1028 cartons * 1000 pcs = 1028000 pcs 40HQ: 2388 cartons * 1000 pcs = 2388000 pcs

    33,76 zł

  • SPS8050B.jpg@c1c48c0dbc752dd033a84c6886ffad64

    For CAT S53 LCD Screen with Digitizer Full Assembly(Black)

    Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with CAT:  S53 Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    235,09 zł

  • SPS7989B.jpg@997dd7feff87bc205a6384e83d9b9006

    For ZTE Blade V50 Design 4G LCD Screen Digitizer Full Assembly with Frame (Black)

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly with frame replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with ZTE:  Blade V50 Design Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    125,00 zł

  • SPS7991B.jpg@2302392fa3df7a5723e6acebf9f7db3f

    For ZTE Blade V50 Design 5G 8150 LCD Screen with Digitizer Full Assembly (Black)

    Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. LCD display + touch screen digitizer assembly replacement part. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with ZTE:  Blade V50 Design Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    112,93 zł

  • SPS8069.jpg@b5be51fed1297bd296ba9dfff65e458d

    For OnePlus Nord 2T 5G Charging Port Flex Cable

    1. Charging port flex cable replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with ONEPLUS:  Nord 2T Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    38,25 zł

  • SPS8070.jpg@b4c4d6016236bb184fbae2f0b40a4f42

    For OnePlus Nord SIM Card Reader Board With Mic

    1. SIM card reader board with Mic replacement part 2. Replace your broken or unusable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsSpecification: General Compatible with ONEPLUS:  Nord Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    45,01 zł

  • SPS8048.jpg@74804ca131fdac5321c6928cb657e643

    For ZTE nubia Red Magic 6s Pro / 7 / 7s Fingerprint Sensor Flex Cable

    1. Fingerprint sensor flex cable for ZTE nubia Red Magic 6s Pro / 7 / 7s. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. Specification: General Compatible with ZTE:  nubia Red Magic 7S , nubia Red Magic 7 , nubia Red Magic 6s Pro Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 32cm * 27cm / 12.6inch * 12.6inch * 10.63inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs

    47,88 zł

  • EDA006599705.jpg@b22a5e5f550607b13cd7e2cda23200aa

    For Ulefone Armor 22 Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with Ulefone:  Armor 22 Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    56,68 zł

  • EDA006600607.jpg@b222e79f2a1057e7559a21729512a831

    For Xiaomi 14 Original Main Back Facing Camera

    1. Main back-facing camera replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  14 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 32cm * 27cm * 32cm / 12.6inch * 10.63inch * 12.6inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs

    112,27 zł

  • EDA006600603.jpg@f12e987c1a910bb44769f58521c6cccb

    For Xiaomi Redmi Note 12 Pro+ Original Main Back Facing Camera

    1. Main back-facing camera replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Specification: General Compatible with Xiaomi:  Redmi Note 12 Pro+ Global Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 10.00kgs / 22.05lb Carton Size 32cm * 27cm * 32cm / 12.6inch * 10.63inch * 12.6inch Loading Container 20GP: 964 cartons * 1000 pcs = 964000 pcs 40HQ: 2239 cartons * 1000 pcs = 2239000 pcs

    106,09 zł

  • TBD0604891701.jpg@9dec431cfe66544323e807ff795477ff

    For Sony PlayStation Portal Controller Hall Electromagnetic Joystick, Spec: Left

    1. Compatibility: Suitable for Sony PlayStation Portal 2. Modify the Hall joystick, disassemble the handle and install it directly without welding, easy to operate 3. Solve the joystick drift problem, no need to install the fixing frame, fix the screws, plug in the cable and you can use it 4. By pushing, tilting and rotating the joystick, you can control the movement and perspective of the character. 5. Suitable for players who like to play games, especially those who have requirements for game control experience.Specification: General Compatible with Sony:  PlayStation Portal Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 360 Carton Weight 6.14kgs / 13.54lb Carton Size 34cm * 32cm * 47cm / 13.39inch * 12.6inch * 18.5inch Loading Container 20GP: 521 cartons * 360 pcs = 187560 pcs 40HQ: 1210 cartons * 360 pcs = 435600 pcs

    54,24 zł

  • EDA006621703.jpg@0dd3927a735cc5cbd8f802a9cdcc24d3

    For Doogee S41T LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with DOOGEE:  S41T Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    147,35 zł

  • EDA006621706.jpg@0dd3927a735cc5cbd8f802a9cdcc24d3

    For Doogee S110 LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with DOOGEE:  S110 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    215,49 zł

  • EDA006621709.jpg@0dd3927a735cc5cbd8f802a9cdcc24d3

    For Doogee V31GT LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with DOOGEE:  V31GT Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    215,49 zł

  • EDA006626113.jpg@b22a5e5f550607b13cd7e2cda23200aa

    For Blackview BV6200 Pro Charging Port Board

    1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.Specification: General Compatible with Blackview:  BV6200 Pro Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    50,10 zł

  • EDA004868610.jpg@0dd3927a735cc5cbd8f802a9cdcc24d3

    For Blackview BV6200 LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Blackview:  BV6200 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    147,35 zł

  • EDA006647101.jpg@ac5f0369a244a7dd4352414977ca5dca

    For Canon EF 8-15mm f/4L Camera USM Lens Aperture Mechanism with Flex Cable

    1. The camera USM lens aperture assembly refers to the aperture mechanism of a lens equipped with Ultrasonic Motor (USM) technology. controls the aperture size of the lens, influencing exposure and depth of field.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 800 Carton Weight 11.20kgs / 24.69lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 800 pcs = 447200 pcs 40HQ: 1299 cartons * 800 pcs = 1039200 pcs

    447,92 zł

  • EDA006649603.jpg@823bbe34cbe3c4ed50e46f8ba38631d3

    For Canon EOS 6D Original Power Board

    1. Camera power board replacement part.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.Specification: General Compatible with Canon:  EOS 6D Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 1200 pcs = 880800 pcs 40HQ: 1705 cartons * 1200 pcs = 2046000 pcs

    209,12 zł

  • EDA006673904.jpg@fba19499d42ad4ba8a78b4e80a80a0bc

    For vivo T1 Pro 5G V2151 OLED LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Vivo:  T1 Pro Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    185,51 zł

  • SPS8045.jpg@545465c09d808ef678ded6f8ddfe7383

    For Samsung Galaxy Note20 5G SM-N981B EU Version Signal Flex Cable

    1. Signal flex cable replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Samsung:  Galaxy Note20 5G Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

    33,63 zł

  • EDA006711903.jpg@22189f47ac7826d66f9046b388ff022d

    For Cubot KingKong 6 OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with CUBOT:  KingKong 6 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    137,46 zł

  • EDA006711904.jpg@04355a9235a78c626a4a8e60d83a43b3

    For Cubot X70 OEM LCD Screen with Digitizer Full Assembly

    Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with CUBOT:  X70 Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs 40HQ: 773 cartons * 40 pcs = 30920 pcs

    117,94 zł

  • EDA006370202.jpg@024bc0449446b26b6e2f48aa8a5c06d2

    For Samsung Galaxy Note20 SM-N980F/DS 4300mAh Battery Replacement

    1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or waterSpecification: General Compatible with Samsung:  Galaxy Note20 Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 5.5cm * 1cm / 3.94inch * 2.17inch * 0.39inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 32cm * 24cm * 12cm / 12.6inch * 9.45inch * 4.72inch Loading Container 20GP: 2893 cartons * 120 pcs = 347160 pcs 40HQ: 6717 cartons * 120 pcs = 806040 pcs

    54,24 zł

  • EDA003363509A.jpg@e22a0cb035c48641a16ad3cfbed2e8eb

    For Samsung Galaxy Tab S6 Lite P610 Marble Pattern Smart Leather Tablet Case(Splicing Marble)

    1. Simple and easy, comfortable, easy to carry.2. It adequately protects devices from the normal scratches, dirt, tear and wear.3. Access to all ports and buttons easily without removing the case.4. With good performance and high quality, it may work for a long time.5. Receipt signal well.6. Smart cover can make your tablet wake up or sleep by opening or closing the cover.7. With holder, easy to use.Specification: General Compatible with Samsung:  Galaxy Tab S6 Lite Package Weight One Package Weight 0.22kgs / 0.48lb One Package Size 26cm * 18cm * 2cm / 10.24inch * 7.09inch * 0.79inch Qty per Carton 50 Carton Weight 12.25kgs / 27.01lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 50 pcs = 26100 pcs 40HQ: 1212 cartons * 50 pcs = 60600 pcs

    48,23 zł

  • TBD0603401204B.jpg@c90952a80517f126541ff25d0246eebd

    For Samsung S6 Lite 10.4 inch Adjustable Tablet Waterproof Anti-drop Protective Cover(Black)

    1. Material: Microfiber, TPU2. Function: anti-scratch, anti-drop, multi-angle adjustment, delicate hand feeling3. Comes with a stable support frame, the angle can be adjusted at will4. Waterproof and antifouling, easy to clean5. Made of high-quality TPU soft material, all-inclusive reinforcement6. Edge anti-collision airbag design, anti-fall and anti-shock7. Intelligent sleep, save power and energy8. Protruding edge design, 2mm higher than the screen, to prevent the screen from scratching9. Honeycomb heat dissipation design, honeycomb intensive heat dissipation10. Note: Only the protective case will be shipped, nothing else!Specification: General Compatible with Samsung:  Galaxy Tab S6 Lite Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 34cm * 24cm * 4cm / 13.39inch * 9.45inch * 1.57inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs 40HQ: 412 cartons * 74 pcs = 30488 pcs

    69,93 zł

  • SYA002335508B.jpg@b4f4ba7cf24cec7f3bf9cfce7792c290

    For Samsung Galaxy S7 FE 12.4 T730 / T736 Handle Kickstand Children EVA Shockproof Tablet Case(Mint Green)

    1. Material: Made of impact-resistant EVA and PC material, efficiently prevents the tablet from accidental drops, bumps and scratches, super shockproof.2. Lightweight: Super lightweight and child friendly non-toxic soft EVA foam with anti-slip textured sides for a firm grip; Perfect for baby, toddler, boys and girls3. Protection: Raised bezel edges to protect the screen from being scratched and shattered;4. Holder function: Built-in kickstand on the back for watching movies or drawing conveniently.5. Precise Cutouts: It is easy to access all buttons, speakers, cameras and sensors through the precisely-cut openings, all the ports are where they should be.6. Portable Handle: Durable and comfortable grip handle for easy handling and carrying around from school to home.Specification: General Compatible with Samsung:  Galaxy Tab S7 FE Package Weight One Package Weight 0.30kgs / 0.66lb One Package Size 31cm * 25cm * 2.5cm / 12.2inch * 9.84inch * 0.98inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 50cm * 28cm / 20.47inch * 19.69inch * 11.02inch Loading Container 20GP: 366 cartons * 40 pcs = 14640 pcs 40HQ: 850 cartons * 40 pcs = 34000 pcs

    78,07 zł

  • SYA002335508D.jpg@f86f33f79f005f7fd97666ff7abc94b6

    For Samsung Galaxy S7 FE 12.4 T730 / T736 Handle Kickstand Children EVA Shockproof Tablet Case(Light Purple)

    1. Material: Made of impact-resistant EVA and PC material, efficiently prevents the tablet from accidental drops, bumps and scratches, super shockproof.2. Lightweight: Super lightweight and child friendly non-toxic soft EVA foam with anti-slip textured sides for a firm grip; Perfect for baby, toddler, boys and girls3. Protection: Raised bezel edges to protect the screen from being scratched and shattered;4. Holder function: Built-in kickstand on the back for watching movies or drawing conveniently.5. Precise Cutouts: It is easy to access all buttons, speakers, cameras and sensors through the precisely-cut openings, all the ports are where they should be.6. Portable Handle: Durable and comfortable grip handle for easy handling and carrying around from school to home.Specification: General Compatible with Samsung:  Galaxy Tab S7 FE Package Weight One Package Weight 0.30kgs / 0.66lb One Package Size 31cm * 25cm * 2.5cm / 12.2inch * 9.84inch * 0.98inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 50cm * 28cm / 20.47inch * 19.69inch * 11.02inch Loading Container 20GP: 366 cartons * 40 pcs = 14640 pcs 40HQ: 850 cartons * 40 pcs = 34000 pcs

    78,25 zł

  • EDA005891204B.jpg@a0930909e81841d35ada96225af551e0

    For Samsung Galaxy Tab A9 Pure Color Liquid Silicone Shockproof Tablet Case(Yellow)

    1. Silicone material, non-toxic and odorless, has excellent wear resistance, not easy ageing.2. Ultra thin, lightweight, extraordinary design.3. It adequately protects devices from scratches, accidental drops and collision.4. A soft microfiber lining inside helps protect the back cover of phone.5. The silky silicone exterior gives you great touch.Specification: General Compatible with Samsung:  Galaxy Tab A9 Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 25.5cm * 17cm * 1cm / 10.04inch * 6.69inch * 0.39inch Qty per Carton 60 Carton Weight 18.60kgs / 41.01lb Carton Size 42cm * 35cm * 28cm / 16.54inch * 13.78inch * 11.02inch Loading Container 20GP: 647 cartons * 60 pcs = 38820 pcs 40HQ: 1504 cartons * 60 pcs = 90240 pcs

    44,92 zł

  • EDA006127401A.jpg@4a1256c211481b0e01898d4bcc2d9657

    For Samsung Galaxy Tab S9 FE Retro Book Leather Tablet Case(Light Brown)

    1. Durable: Made of PC+PU leather material, durable2. Stand: Stand function, flip cover which can be folded back to be a stand holder to make watching videos more convenient.3. Scratch Protection: The case is tightly sealed and your tablet will not be scratched.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Samsung:  Galaxy Tab S9 FE Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 30cm * 20cm * 1.5cm / 11.81inch * 7.87inch * 0.59inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 40 pcs = 24800 pcs 40HQ: 1439 cartons * 40 pcs = 57560 pcs

    63,74 zł

  • EDA005215808B.jpg@3a244ebc6ef49f5309c857d5ffae4863

    For Samsung Galaxy Tab S9 FE+ TPU Tablet Case(Frosted Clear)

    1. Material: Made TPU material, non-toxic and odorless, wear-resistant and scratch-resistant. It can work for a long time.2. Full Protection: It fully protects the equipment from general scratches, dirt and abrasion.3. Lightweght And Easy Use: Compact, light-weight,easy to install and remove.4. Ultra slim fit: The ultra slim fit and skin-friendly case is specially designed and will bring you a different using experience with a stunning hand feeling.5. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the case.Note: The actual product is subject to the title model, the model of the picture is for reference only.Specification: General Compatible with Samsung:  Galaxy Tab S9 FE+ Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 30cm * 22cm * 1cm / 11.81inch * 8.66inch * 0.39inch Qty per Carton 80 Carton Weight 8.20kgs / 18.08lb Carton Size 52cm * 37cm * 22cm / 20.47inch * 14.57inch * 8.66inch Loading Container 20GP: 630 cartons * 80 pcs = 50400 pcs 40HQ: 1462 cartons * 80 pcs = 116960 pcs

    30,32 zł

  • EDA005767105E.jpg@6cc5f8fbe1f87f0829f825e2999e0579

    For Samsung Galaxy Tab S9 FE Cartoon Sakura Cat Embossed Leather Tablet Case(Blue)

    1. Durable: PU + TPU material, wear-resistant and durable. With good performance and high quality can be used for a long time.2. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.3. Card Wallet Case: Combination of a wallet and tablet PC case, with ID credit card slots and photo frame, it can be used as wallet to keep multi credit cards, cash, ID, and money, photos.4. Kickstand function: Adjustable viewing angles, can be converted easily into a stand, freely and relaxed to enjoy video, movies, facetime, e-book, pictures, etc.5. Convenience: All buttons and ports can be accessed, charged, and connected to the headphone cable without removing the tablet case.Note: The actual product is subject to the title model, and the picture model is for reference only.Specification: General Compatible with Samsung:  Galaxy Tab S9 FE Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 28cm * 20cm * 2cm / 11.02inch * 7.87inch * 0.79inch Qty per Carton 40 Carton Weight 11.20kgs / 24.69lb Carton Size 42cm * 42cm * 30cm / 16.54inch * 16.54inch * 11.81inch Loading Container 20GP: 503 cartons * 40 pcs = 20120 pcs 40HQ: 1169 cartons * 40 pcs = 46760 pcs

    52,93 zł

  • EDA005761504B.jpg@55651d4e5b03cee4891daae029d240bd

    For Samsung Galaxy Tab S9 FE Calf Texture Embossed Leather Tablet Case(Brown)

    1. Made of PU leather and TPU material, it can be used for a long time.2. It adequately protects the device from general scratches, dirt and wear.3. The stand design makes it easy for you to view horizontally.4. With bracket & card slot & pen slot & elastic band, practical and convenient.5. Easy access to all ports and buttons without removing the case.Note: The actual product is subject to the title model, and the picture model is for reference only.Specification: General Compatible with Samsung:  Galaxy Tab S9 FE Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 30cm * 20cm * 2cm / 11.81inch * 7.87inch * 0.79inch Qty per Carton 40 Carton Weight 11.50kgs / 25.35lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 40 pcs = 18880 pcs 40HQ: 1096 cartons * 40 pcs = 43840 pcs

    52,93 zł

  • EDA006302701B.jpg@d560c5580fe3e2dc70fb902080797a65

    For Samsung Galaxy Tab Active5 X300 Silicone Hybrid PC Tablet Case with Holder & Shoulder Strap(Black)

    1. Material: Made of Silicone + PC material, durable, it can work for a long time.2. Full Protection: It fully protects the equipment from general scratches, dirt and abrasion.3. Rotation Stand Function: 360 degree rotating stand that offers multiple angle stands for enjoying the most comfortable keyboard-typing and movie-viewing.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Precise Cut-Out: Precise cut-outs and openings, with easy access to all features, ports and buttons.6. Detachable Shoulder Strap: The adjustable hand strap provides easy and comfortable grip, a must-have feature when you are presenting your tablet to others. The detachable and adjustable shoulder strap can help you carry your tablet more safely while hiking, traveling and other outdoor activities. This can also be used to secure your tablet to the car seat.Specification: General Compatible with Samsung:  Galaxy Tab Active5 Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 26cm * 20cm * 2cm / 10.24inch * 7.87inch * 0.79inch Qty per Carton 40 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 27cm * 42cm / 16.54inch * 10.63inch * 16.54inch Loading Container 20GP: 559 cartons * 40 pcs = 22360 pcs 40HQ: 1299 cartons * 40 pcs = 51960 pcs

    75,33 zł

  • EDA006302701H.jpg@432081fe0d77cb50beabf6dce61dfed8

    For Samsung Galaxy Tab Active5 X300 Silicone Hybrid PC Tablet Case with Holder & Shoulder Strap(Emerald Green)

    1. Material: Made of Silicone + PC material, durable, it can work for a long time.2. Full Protection: It fully protects the equipment from general scratches, dirt and abrasion.3. Rotation Stand Function: 360 degree rotating stand that offers multiple angle stands for enjoying the most comfortable keyboard-typing and movie-viewing.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Precise Cut-Out: Precise cut-outs and openings, with easy access to all features, ports and buttons.6. Detachable Shoulder Strap: The adjustable hand strap provides easy and comfortable grip, a must-have feature when you are presenting your tablet to others. The detachable and adjustable shoulder strap can help you carry your tablet more safely while hiking, traveling and other outdoor activities. This can also be used to secure your tablet to the car seat.Specification: General Compatible with Samsung:  Galaxy Tab Active5 Package Weight One Package Weight 0.41kgs / 0.90lb One Package Size 26cm * 20cm * 2cm / 10.24inch * 7.87inch * 0.79inch Qty per Carton 40 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 27cm * 42cm / 16.54inch * 10.63inch * 16.54inch Loading Container 20GP: 559 cartons * 40 pcs = 22360 pcs 40HQ: 1299 cartons * 40 pcs = 51960 pcs

    75,02 zł

  • EDA006376005E.jpg@3ab7f43241c51a68f77b812725b69cc7

    For Samsung Galaxy Tab A9+ X210/X216 Coconut Tree Embossed Smart Leather Tablet Case(Brown)

    1. Made of PU leather and TPU material, it can work for a long time.2. Can fully protect the device from general scratches, dirt, tears and wear.3. The bracket design makes horizontal viewing more convenient.4. All ports and buttons are easily accessible without removing the case.5. Functional card slot, photo frame and pen slot for easy use.6. Auto sleep/wake: Better power saving and longer standby time when the case is close to the screen, allowing easy access to all buttons and ports without removing the tablet from the case.Specification: General Compatible with Samsung:  Galaxy Tab A9+ Package Weight One Package Weight 0.28kgs / 0.63lb One Package Size 26cm * 19cm * 2cm / 10.24inch * 7.48inch * 0.79inch Qty per Carton 80 Carton Weight 23.40kgs / 51.59lb Carton Size 54cm * 42cm * 40cm / 21.26inch * 16.54inch * 15.75inch Loading Container 20GP: 293 cartons * 80 pcs = 23440 pcs 40HQ: 682 cartons * 80 pcs = 54560 pcs

    51,10 zł

  • S-MPTP-4015.jpg@61bde901f83bb777d67ba483130f2894

    For Galaxy Note 10.1 (2014 Edition) P600 / P601 / P605, Note 12.2 / P900 High Sensitive Stylus Pen(Black)

    1. Compact design and feel, bring greater comfort and accuracy 2. Suitable for Samsung Galaxy Note 10.1 (2014 version) / P600 3. High pen tip touch sensitivity 4. You can write, draw, design, etc. anytime, anywhere 5. Small size and portableSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 13cm * 5cm * 0.5cm / 5.12inch * 1.97inch * 0.2inch Qty per Carton 480 Carton Weight 19.68kgs / 43.39lb Carton Size 30cm * 30cm * 20cm / 11.81inch * 11.81inch * 7.87inch Loading Container 20GP: 1481 cartons * 480 pcs = 710880 pcs 40HQ: 3439 cartons * 480 pcs = 1650720 pcs

    35,51 zł

  • MBC0667H.jpg@6934c05537c9dbe299951a37158f0d01

    High Sensitivity Stylus Pen For Samsung Galaxy Tab S6 / T860 /T865(Grey)

    1. No need to connect bluetooth, one key to turn on 2. High sensitivity, no damage to the screen 3. It is convenient to write, record your thoughts, annotate, etc. anytime and anywhere 4. Comfortable grip 5. Small size, easy to carry 6. Size: about 14.3x0.6cmSpecification: General Compatible with Samsung:  Galaxy Tab S6 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 17cm * 6cm * 1cm / 6.69inch * 2.36inch * 0.39inch Qty per Carton 840 Carton Weight 25.20kgs / 55.56lb Carton Size 53cm * 44cm * 42cm / 20.87inch * 17.32inch * 16.54inch Loading Container 20GP: 272 cartons * 840 pcs = 228480 pcs 40HQ: 632 cartons * 840 pcs = 530880 pcs

    52,19 zł

  • MBC0778.jpg@1447204374d976ba7a8e5e90bd88c293

    Touch Capacitive Pen Stylus For Samsung Galaxy Z Fold4/Galaxy Z Fold3 5G

    1. Free writing, smooth and continuous handwriting. 2. Allows you to record your thoughts and inspirations at any time. 3. Professional design, comfortable hand feel and easy to carry. 4. One-key operation of multi-function keys. 5. One-key access, easy to operate. 6. Without Bluetooth function. Note: Pen case not included Specification: General Compatible with Samsung:  Galaxy Z Fold4 , Galaxy Z Fold3 5G Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 5cm * 1cm / 5.91inch * 1.97inch * 0.39inch Qty per Carton 400 Carton Weight 8.40kgs / 18.52lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 400 pcs = 360400 pcs 40HQ: 2093 cartons * 400 pcs = 837200 pcs

    60,91 zł

  • MBC0781B.jpg@f20ea650affbc0d15456b7d5b68473c0

    6 in 1 Universal Stylus Pen Replacement Pencil Tips For Samsung Galaxy Tab S8 / S7 / S6 / Galaxy Note20 / Note10 / S23 Ultra / S22 Ultra(Black)

    1. Product material: ABS 2. Good Compatibility: The replacement nibs are suitable for Samsung Galaxy Tab S6/Tab S7/Tab S8 devices, suitable for Samsung Galaxy Note20/Note10 devices. 3. High Sensitivity: The pen tip can give you an accurate writing/drawing experience with excellent responsiveness and sensitivity. 4. Perfect quality: The size of this product is the same as the original nib, safe and reliable to use. 5. No scratches: The fine rubber tip glides smoothly without scratches, which greatly reduces the friction on the screen. 6. Easy to install: 5 nibs, easy to install without any tools, and you can use tools to remove them when needed. 7. Note: Only replacement refills are included in the package, the stylus is not included 8. Packing list: replacement nib x 5Specification: General Compatible with Samsung:  Galaxy Tab S8 , Galaxy Tab S7 , Galaxy Tab S6 Samsung:  Galaxy S23 Ultra 5G , Galaxy S22 Ultra 5G , Galaxy Note20 , Galaxy Note10 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 4cm * 4cm * 1cm / 1.57inch * 1.57inch * 0.39inch Qty per Carton 500 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 20cm * 20cm / 12.6inch * 7.87inch * 7.87inch Loading Container 20GP: 2083 cartons * 500 pcs = 1041500 pcs 40HQ: 4836 cartons * 500 pcs = 2418000 pcs

    25,92 zł

Login

Forgot your password?

Don't have an account yet?
Create account