CN Warehouses

About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy S5 / G900 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan 2. Original top quality. 3. Complete fit and work 4. Supply quality warranty with professional service

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly with frame for Samsung Galaxy J7 (2016) / J710F. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly with frame for Samsung Galaxy J7 (2016) / J710F. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly (incell) for Samsung Galaxy A30S. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly (incell) for Samsung Galaxy M30 / M30s. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for Samsung Galaxy M20 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J7 (2016) / On 8, J710F / J710FN / J710M / J710MN / J7108. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J2 Pro (2018) J250F/DS. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy J110 (2015) 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Front housing LCD frame bezel plate replacement for Google Pixel 3a. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Make your device look more refreshing than ever 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Back cover replacement for Google Pixel 3 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Back cover replacement for Google Pixel 4XL 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. High quality battery back cover upper part replacement for Google Pixel / Nexus S1. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Google Pixel 3a. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Back camera for Google Pixel 4. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Replacement earpiece for Google Pixel 3a / 3a XL 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Speaker ringer buzzer for Google Pixel 4 2. Replace your broken or unusable one with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. High quality Vibrating Motor for Google Pixel 2 XL 2. Replace your broken or unusable item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. SIM Card Tray for Google Pixel 2. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Wire specifications: 2725 (28AWG/1P+D+AL+M) x 2+28AWG/1P+24 AWG/2C+AL+D+B(6/16/0.12AL-MG), OD=6.0mm 2. Color: blue 3. Plug: Nickel-plated iron shell, 3U gold-plated terminal 4. Forming: low-density PE inner mold, PVC outer mold (environmental protection) 5. Transmission rate: 5GPps 6. Backward compatible with USB2.0 and 1.1 versions 7. USB3.0 is a full-duplex, four-channel differential signal independent of USB 2.0 signals, and supports simultaneous two-way data transmission 8. Windows2003/2007/XP/Vista/WIN7/WIN8, support plug and play, support hot swap 9. Higher power, faster charging, easy to drive related equipment 10. 90 degrees right-angle model design, more convenient to plug and use 11. Applicable to equipment with high-speed two-way transmission of large-capacity files, such as printers, computers, HUBs, etc 12. Cable length: 2.5m

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Sony Xperia 10 III 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for HTC U20 5G 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei MatePad Pro 5G MRX-AL09, MRX-AL19, MRX-W09, MRX-W19 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Product Model: K-9208 (V24) 2. Product size :13.8 x 7.7 x 1.4cm 3. For iPhone 6P/6S/6SP/7G/7P/8G/8P/X/XS/XR/XS Max/11/11 Pro/11Pro Max/12/12 Mini/12 Pro/12Pro Max/13/13 Mini/13 Pro/13Pro Max/14/14 Plus/14 Pro/14Pro Max/15/15 Plus/15 Pro/15Pro Max 4. For Samsung/Xiaomi/Huawei/OnePlus/VIVO/OPPO, etc Android phones too 5. An intelligent chip is adopted to realize fast charging 6. With sleep wake-up function. Press the activate key to activate the battery during sleep. The battery can be used normally again 7. Support other charging equipment to avoid long-term occupation of electric energy meters and affecting maintenance work 8. Intelligent automatic identification of battery positive and negative poles. The positive and negative electrodes are connected in reverse, which does not burn the machine. It can be used directly after being fastened 9. Intelligent charging mode, in line with the lithium battery charging process 10. In the whole process of intelligent charging, without manual supervision, stop charging at full speed without worrying about the danger caused by excessive charging 11. The battery is fully charged with the automatic steering lamp, and the green lamp is used for real charging and is fully charged with the automatic steering lamp 12. Intelligently identify the short-circuit battery. In the case of a short-circuit, the red indicator lights up and turns off the power supply The fixture can work normally only when the input voltage is greater than the current battery voltage and the maximum charging current is 2A 13. Advanced design, safety, fast charging speed, and battery capacity can be charged to 100%, with accurate short-circuit judgment ability, shield all kinds of bad batteries for you, and greatly save your valuable time 14. According to the different conditions of the panel, the other functions are introduced respectively. If no power is connected, the following three situations will occur when the battery that needs to be charged is connected to the activation board: A. All the indicators of the activation board are off: the battery voltage is lower than 2.5V, (The activation board needs to be higher than 2.5V input to start working) B. Short circuit indicator light, indicating that the battery short circuit; C. The activation board power indicator lights up: the digital meter on the right shows the voltage number (the voltage is the current battery voltage) Note: Input voltage should not exceed 5V, Otherwise it will damage the battery life, only one battery can be charged each time

Read more less

1. Charging port board replacement part.2. This part is used to replace your damaged or unworkable one with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Fingerprint sensor flex cable for LG K50 LMX520BMW LMX520EMW LM-X520 / Q60 LMX525EAW LMX525BAW LM-X525 / K12 Prime / K12 Max (Brazil) LMX525BAW. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Fabric: Oxford cloth2. Lining texture: polyester3. Features: breathable, waterproof, wear-resistant, shock-resistant4. Size: 31x49x18 cm5. Net weight: 890g6. Leather handle, more comfortable grip7. USB charging port design, convenient for charging8. After the zipper is opened, the capacity is expanded by 8 cm9.180 degree fully open backpack, expandable design, more convenient10. Human body comfortable shoulder straps and honeycomb mesh enhance breathability

Read more less

1. 3-layer protection: Made of hard PC, plastic covers and soft silicone outer shell, anti-fall and anti-collision, durable.2. Fully protection: Provide a full protection from dust, shock, scratches and bumps and other daily damage.3. Precise cutouts: All buttons and ports are accessible.4. Holder function: With stand function, to makes it easy to enjoy movies, typing, reading, gaming, web browsing on tablet PC.5. Grip and strap design: With shoulder strap and hand grip strap function, very convenient.Specification: General Compatible with Huawei:  Honor Pad X8 Pro Package Weight One Package Weight 0.39kgs / 0.87lb One Package Size 31cm * 20cm * 2.5cm / 12.2inch * 7.87inch * 0.98inch Qty per Carton 50 Carton Weight 19.50kgs / 42.99lb Carton Size 53cm * 32cm * 42cm / 20.87inch * 12.6inch * 16.54inch Loading Container 20GP: 374 cartons * 50 pcs = 18700 pcs 40HQ: 869 cartons * 50 pcs = 43450 pcs

Read more less

1. Material: Adopt PU leather material, it may work for a long time.2. Multi-Fold Stand: Multi-Fold flip stand design set you at ease for horizontal viewing.3. Strong Magnetic: A magnet will come with the case, it offers strong magnetic and support multiple angles for your work or entertainment.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Huawei:  Honor MagicPad 2 12.3 Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 29cm * 20cm * 1.2cm / 11.42inch * 7.87inch * 0.47inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 25cm * 30cm / 16.54inch * 9.84inch * 11.81inch Loading Container 20GP: 846 cartons * 40 pcs = 33840 pcs 40HQ: 1965 cartons * 40 pcs = 78600 pcs

Read more less

1. Material: Adopt PU leather material, it may work for a long time.2. Multi-Fold Stand: Multi-Fold flip stand design set you at ease for horizontal viewing.3. Strong Magnetic: A magnet will come with the case, it offers strong magnetic and support multiple angles for your work or entertainment.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Huawei:  Honor MagicPad 2 12.3 Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 29cm * 20cm * 1.2cm / 11.42inch * 7.87inch * 0.47inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 25cm * 30cm / 16.54inch * 9.84inch * 11.81inch Loading Container 20GP: 846 cartons * 40 pcs = 33840 pcs 40HQ: 1965 cartons * 40 pcs = 78600 pcs

Read more less

1. Durable Material : Made of PU leather, microfiber and TPU material, it can be used for a long time.2. Protection: It adequately protects devices from the normal scratches, dirt, tear and wear.3. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.4. Lightweght And Easy Use: Compact, light-weight,easy to install and remove.5. Precise Cut-Out: Precise cut-outs and openings, with easy access to all features, ports and buttons.Note: The actual product is subject to the title model, the model machine of the picture is only for effect reference.Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 25cm * 16cm * 1.5cm / 9.84inch * 6.3inch * 0.59inch Qty per Carton 100 Carton Weight 17.50kgs / 38.58lb Carton Size 50cm * 33cm * 32cm / 19.69inch * 12.99inch * 12.6inch Loading Container 20GP: 505 cartons * 100 pcs = 50500 pcs 40HQ: 1172 cartons * 100 pcs = 117200 pcs

Read more less

1. Material: Made of impact-resistant EVA and PC material, efficiently prevents the tablet from accidental drops, bumps and scratches, super shockproof.2. Lightweight: Super lightweight and child friendly non-toxic soft EVA foam with anti-slip textured sides for a firm grip; Perfect for baby, toddler, boys and girls3. Protection: Raised bezel edges to protect the screen from being scratched and shattered;4. Holder function: Built-in kickstand on the back for watching movies or drawing conveniently.5. Precise Cutouts: It is easy to access all buttons, speakers, cameras and sensors through the precisely-cut openings, all the ports are where they should be.6. Portable Handle: Durable and comfortable grip handle for easy handling and carrying around from school to home.Specification: General Compatible with Huawei:  MatePad SE 11 2024 Package Weight One Package Weight 0.26kgs / 0.56lb One Package Size 29cm * 24cm * 2.5cm / 11.42inch * 9.45inch * 0.98inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 50cm * 28cm / 20.47inch * 19.69inch * 11.02inch Loading Container 20GP: 366 cartons * 40 pcs = 14640 pcs 40HQ: 850 cartons * 40 pcs = 34000 pcs

Read more less

1. Material: Adopt PU leather material, it may work for a long time.2. Multi-Fold Stand: Multi-Fold flip stand design set you at ease for horizontal viewing.3. Strong Magnetic: A magnet will come with the case, it offers strong magnetic and support multiple angles for your work or entertainment.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Huawei:  MatePad 11.5S , MatePad 11.5 2023 Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 26cm * 20cm * 1.2cm / 10.24inch * 7.87inch * 0.47inch Qty per Carton 40 Carton Weight 11.20kgs / 24.69lb Carton Size 42cm * 27cm * 25cm / 16.54inch * 10.63inch * 9.84inch Loading Container 20GP: 940 cartons * 40 pcs = 37600 pcs 40HQ: 2183 cartons * 40 pcs = 87320 pcs

Read more less

1. Durable: Made of PU leather and silicone material, it may work for a long time.2. Tri-fold stand: Stand function, flip cover which can be folded back to be a stand holder to make watching videos more convenient.3. Scratch Protection: The case is tightly sealed and your tablet will not be scratched.4. Cool And Fashion Design: Cool and fashion appearance, protect your tablet in style.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Lenovo:  Tab M11 / Xiaoxin Pad 11 2024 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 28cm * 18cm * 1.5cm / 11.02inch * 7.09inch * 0.59inch Qty per Carton 50 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 50 pcs = 31000 pcs 40HQ: 1439 cartons * 50 pcs = 71950 pcs

Read more less

1. Compatibility: Specifically designed for the new 10.3" Boox Note Air 3/Note Air 3 C (2023 release)/Boox Note Air/Boox Note Air 2/Note Air 2 Plus ePaper tablets.2. Auto Sleep/Wake: Equipped with an auto sleep-wake function, this cover will wake up your Boox tablet when opened and put it to sleep when closed, saving battery power and extending battery life.3. Multi-Angle Adjustment: Our cover supports both horizontal and vertical viewing. It can rotate 360 degrees with three different angles to provide you with the best viewing and usage experience. Whether you are working, cooking, playing with your kids, or traveling, you can easily switch between two angles to meet your viewing and typing needs.4. Hand Strap: The elastic hand strap makes one-handed reading easier, allowing you to hold your tablet more comfortably without the risk of dropping it.5. Comprehensive Protection Design: Made with a premium leather exterior and a soft microfiber interior, this cover effectively protects your digital paper tablet from any unnecessary scratches, scuffs, and other damage.6. Weight: 387g7. Dimensions: 23 x 20.2 x 2cmSpecification: Package Weight One Package Weight 0.40kgs / 0.87lb One Package Size 25cm * 22cm * 3cm / 9.84inch * 8.66inch * 1.18inch Qty per Carton 20 Carton Weight 9.10kgs / 20.06lb Carton Size 27cm * 46cm * 32cm / 10.63inch * 18.11inch * 12.6inch Loading Container 20GP: 670 cartons * 20 pcs = 13400 pcs 40HQ: 1557 cartons * 20 pcs = 31140 pcs

Read more less

1. Durable: Made of TPU+PU leather material, durable2. Stand Function: The stand design makes it easy for you to enjoy movies, type, read, play, and browse the web on your tablet.3. Scratch Protection: The case is tightly sealed and your tablet will not be scratched.4. Stylish and Slim: The slim and lightweight hard back protects your tablet without adding bulk.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Huawei:  Honor Pad 8 Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 28cm * 20cm * 2cm / 11.02inch * 7.87inch * 0.79inch Qty per Carton 30 Carton Weight 12.30kgs / 27.12lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 30 pcs = 22200 pcs 40HQ: 1717 cartons * 30 pcs = 51510 pcs

Read more less

1. Durable: Made of TPU+PU leather material, durable2. Stand Function: The stand design makes it easy for you to enjoy movies, type, read, play, and browse the web on your tablet.3. Scratch Protection: The case is tightly sealed and your tablet will not be scratched.4. Stylish and Slim: The slim and lightweight hard back protects your tablet without adding bulk.5. Easy Access: All buttons and ports are easily accessible.Specification: General Compatible with Amazon Kindle:  Scribe 10.2 inch 2022 Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 28cm * 20cm * 2cm / 11.02inch * 7.87inch * 0.79inch Qty per Carton 30 Carton Weight 9.90kgs / 21.83lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 30 pcs = 22200 pcs 40HQ: 1717 cartons * 30 pcs = 51510 pcs

Read more less

1. Durable: Made of TPU+PU leather material, durable2. Deformation: The stand design makes it easy for you to enjoy movies, type, read, play, and browse the web on your tablet.3. Scratch Protection: The case is tightly sealed and your tablet will not be scratched.4. Stylish and Slim: The slim and lightweight hard back protects your tablet without adding bulk.5. Easy Access: All buttons and ports are easily accessible.6. Auto Sleep / Wake: Better energy conservation & extending standby time when cover stays close to the screen and Easy access to all buttons and ports without disassembling the tablet from case.Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 17cm * 15cm * 1.5cm / 6.69inch * 5.91inch * 0.59inch Qty per Carton 80 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 26cm * 32cm / 16.54inch * 10.24inch * 12.6inch Loading Container 20GP: 763 cartons * 80 pcs = 61040 pcs 40HQ: 1771 cartons * 80 pcs = 141680 pcs

Read more less

1. Efficient and Stable Full-Range Cooling: High cooling efficiency with optimized cooling path for wide range coverage. 2. Compatible with Sony ZV-E1/ZV-1F/ZV-1/ZV-E10L/a7RV/a7 IV (A7M4)/a7S III (A7S3)/A7C/FX30/A6700, Canon R10/R7/R6 Mark II/R6 MK1/R5/90D, FUJIFILM XS10/XT4/X-H2S/X-S20/X-H2, Nikon Z30 and more. (Tips: More compatible camera models are currently being tested.) 3. Two Modes Of Operation: High speed and silent mode operation. 4. Snap Buckle Mounting, Convenient Installation: Snap-on installation without damage, more professional, safer and more convenient 5. USB Powered, Plug and Play: Equipped with a 2m USB power cord, no dedicated power supply required, long battery life, continuous cooling, providing you with more creative possibilities 6. Lightweight and Portable: Lightweight, palm-sized, making it easier to store and carry. Specifications: 1. Material: Aluminum alloy +PC 3. Input power: DC 5V 4. Port: Type-C 5. Decibel of fan: Less than or equal to 30DB 6. Method of radiator: Semiconductor cooling radiator 7. Size: 70x50x21mmSpecification: General Compatible with Canon:  EOS R7 , EOS R6 , EOS R5 , EOS 90D Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 15cm * 10cm * 7cm / 5.91inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 27.00kgs / 59.52lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 100 pcs = 33000 pcs 40HQ: 766 cartons * 100 pcs = 76600 pcs

Read more less

1. It is made of stretchable, tenacious, soft high quality natural silicone material. 2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely. 3. Compact, light, and extremely durable design, lightweight, convenient to carry. 4. Internal soft design gives you a soft and comfortable touch. 5. Simple and easy to use, protect your camera and install on your tripod at the same time. 6. This silicone camera case fits for Sony ZV-E10 Camera.Specification: General Compatible with Sony:  ZV-E10 Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 21cm * 14cm * 1.5cm / 8.27inch * 5.51inch * 0.59inch Qty per Carton 200 Carton Weight 6.80kgs / 14.99lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 200 pcs = 89600 pcs 40HQ: 1040 cartons * 200 pcs = 208000 pcs

Read more less

1. Store 52 cm, expand 140 cm2. Single without package weight: 650g Package weight: 750g3. With package size: 52*10*10cm without package size: 51*9*9.5cm4. Interface compatible: mobile phone folder, DV, micro single, SLR5. Xiaoping test 3D pan/tilt6. 360 degree adjustment panoramic shooting7. Easy-to-install design quick-install panel8. Aluminum alloy material9. Center shaft locking hand buttonSpecification: General Compatible with Leica:  Q2 Monochrom , M10 Monochrom Leitz Wetzlar , M10-P Edition Safari , M10 Monochrom , M10-P White , D-LUX (Typ 109) , Q2 , M10-P (ASC 100 Edition) , M10-P , M10 , TL (Typ 701) , Q , M-P , X-U (Typ 113) , M (Typ 262) , M-A (Typ 127) , S , C , M , M9 Panasonic:  Lumix DC-S5 IIX , LUMIX DC-S5 II , Lumix DC-GH5M2 , Lumix DC-S5 , Lumix DC-S5K , Lumix DC-S1M , Lumix DC-S1H , Lumix DC-S1 , Lumix DC-G90 , Lumix DC-S1RM , Lumix DC-S1R , Lumix DC-GF10 , Lumix DC-G9 , Lumix DC-ZS70 , LUMIX GH5 (DC-GH5) , Lumix DMC-GX8 , Lumix DMC-G7 , Lumix GH4H (DMC-GH4H) , LUMIX LX100 (DMC-LX100) , Lumix GH4 (DMC-GH4) , DMC-FZ1000 , Lumix GH3H (DMC-GH3H) , Lumix DMC-LF1 , Lumix DMC-GF6 Canon:  EOS R8 , EOS R50 , EOS R6 Mark II , EOS R10 , EOS R7 , EOS R5 C , EOS R3 , EOS 250D , EOS M50 Mark II , EOS R6 , PowerShot G7 X Mark III , EOS M50 , EOS R5 , EOS Rebel T8i (EOS 850D) , EOS-1D X Mark III , EOS M200 , EOS 90D , EOS M6 Mark II , PowerShot G5 X Mark II , EOS RP , EOS 200D II , EOS 4000D , EOS R , PowerShot SX740 HS , EOS 2000D , EOS 1500D , EOS 3000D , EOS M100 , EOS 6D Mark II , EOS 200D , 6D Mark II , PowerShot SX730 HS , EOS 77D , 800D , PowerShot G9 X Mark II , EOS M6 , EOS M5 , EOS 5D Mark IV , EOS-1D X Mark II , PowerShot G7 X Mark II , 1300D , PowerShot SX720 HS , EOS 1D X Mark Ⅱ , G7 X Mark II , EOS 80D , IXUS 285 HS , EOS M10 , G9 X , G5 X , PowerShot G3X , EOS 5DS R , EOS 5DS , IXUS 275 HS , EOS 760D , EOS 750D , EOS M3 , 1200D , EOS 7D Mark II , PowerShot SX60 , IXUS 265 HS , G16 , PowerShot SX510 , IXUS 132 , EOS 5D Nikon:  Z6III , Z 8 , Z 9 , Zfc , Z6 II , Z7 II , D780 , Z 5 , D6 , Z50 , Z 7 , Z 6 , Coolpix P1000 , D3500 , D850 , KeyMission 360 , KeyMission 170 , KeyMission 80 , D7500 , D5600 , D3400 , D5 , D500 , Coolpix P900s , 1 J5 , D7200 , D810A , D5500 , D750 , D810 , 1 J4 , D4S , D5300 , D610 , Coolpix S2600 , Coolpix L25 , D4 , Coolpix S220 , D300S , D3x , D3 OLYMPUS:  E-M10 MARK IV , E-M1 Mark III , E-M5 MARK III , E-M10 Mark III , E-M1 Mark II , PEN E-PL8 , E-M5 Mark II , E-M10 Mark II , E-PL7 , E-M10 , E-M1 , E-PL6 , E-P5 , TG-2 iHS , E-PL5 , XZ-2 FUJIFILM:  X-S20 , GFX100S II , instax Mini 99 , GFX 100II , GFX 50SII , instax mini 12 , X-T5 , instax mini Evo , X-T30 II , GFX50S II , instax Mini Liplay , instax Mini 40 , GFX100S , X-E4 , instax Mini 7+ , X-T4 , instax SQUARE SQ1 , Instax Mini 11 , X-T200 , X-Pro3 , X-A7 , GFX100 , FinePix XP140 , X-T30 , GFX 50R , Instax SQUARE SQ20 , X-H1 , X-A20 , X-A5 , X-E3 , X-T20 , X100F , GFX 50S , FinePix XP120 , X-A10 , X-T2 , X-A3 , X-Pro 2 , X70 , X-E2S , X-T10 , X30 Sony:  ZV-E10 II (ZV-E10M2) , Alpha 9 III （ILCE9M3） , Alpha 7CR (ILCE-7CR) , Alpha 7C II (ILCE-A7CM2) , Alpha 6700 (ILCE-6700) , Alpha 7R V (ILCE-7RM5) , ZV-1F , Alpha A7 IV , ZV-E10 , FX3 , Alpha 1 , Alpha 7C / a7C / ILCE-7C , ZV-1 , Alpha 7S III (ILCE-7SM3) , A7R IV , Alpha 9 II (ILCE-9M2) , Alpha 6100 (ILCE-6100) , Alpha 6100 / A6100 , Alpha 6600 / A6600 (ILCE-6600) , RX100 VII , RX100 VI , DSC-RX100M6 , A7 III (ILCE-7M3) , ILCE-7RM3 (A7RIII) , ILCE-9 (A9) , ILCA-99M2 (A99 II) , DSC-RX100M5 (RX100 V) , HDR-PJ790E , DSC-RX10M3 (RX10 III) , FDR-X3000 , HDR-PJ760E , A6300 (ILCE-6300) , DSC-HX400 , DSC-HX60 , DSC-RX100M4 (RX100 IV) , ILCE-6500 (A6500) , DSC-RX1RM2 (RX1R II) , ILCE-7SM2 (A7SII) , DSC-RX10M2 (RX10 II) , ILCE-7RM2 (A7RII) , DSC-HX90 , DSC-WX500 , ILCE-QX1 , ILCE-5100 (A5100) , ILCA-77M2 (A77 II) , DSC-RX100M3 (RX100 III) , PMW-EX280 , ILCE-7S (A7S) , PMW-EX260 , DSC-HX7 , DSC-W320 Samsung:  NX300 , DV180F , NX500 , NX1 , WB2014F , NX3000 , EK-GC200 , EK-GC110 , EK-GC100 , NX1000 , PL120 Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 52cm * 10cm * 10cm / 20.47inch * 3.94inch * 3.94inch Qty per Carton 20 Carton Weight 16.50kgs / 36.38lb Carton Size 52cm * 42cm * 50cm / 20.47inch * 16.54inch * 19.69inch Loading Container 20GP: 244 cartons * 20 pcs = 4880 pcs 40HQ: 566 cartons * 20 pcs = 11320 pcs

Read more less

1. Brand new and high quality 2. Excellent for extreme sports and dramatic action shooters 3. 0.45X professional super wide angle lens 4. This kit is compatible with 62mm lenses only 5. This lens features a detachable Macro lens for close-up high detail photographySpecification: General Material Aluminum alloy, Glass, ABS Size 8.5*8.5*4.5cm Weight 241g Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 12cm * 12cm * 8cm / 4.72inch * 4.72inch * 3.15inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 42cm * 37cm * 22cm / 16.54inch * 14.57inch * 8.66inch Loading Container 20GP: 780 cartons * 40 pcs = 31200 pcs 40HQ: 1810 cartons * 40 pcs = 72400 pcs

Read more less

1. Use white acrylic organic material (3MM thick), with white printing on the front and no words on the back2. Colored wooden board, embedded magnet, more professional3. You can write with whiteboard markers, water-based markers or chalk, which are easy to erase4. The use of hard materials, clear and loud sound, suitable for role-playing, TV series, feature film shooting and editing, video production, etc.5. Size: 30cm x 25cmSpecification: Package Weight One Package Weight 0.55kgs / 1.22lb One Package Size 32cm * 27cm * 5cm / 12.6inch * 10.63inch * 1.97inch Qty per Carton 20 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 55cm * 33cm / 20.47inch * 21.65inch * 12.99inch Loading Container 20GP: 282 cartons * 20 pcs = 5640 pcs 40HQ: 655 cartons * 20 pcs = 13100 pcs

Read more less

1. It is made of stretchable, tenacious, soft high quality natural silicone material. 2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely. 3. Compact, light, and extremely durable design, lightweight, convenient to carry. 4. Internal soft design gives you a soft and comfortable touch. 5. Simple and easy to use, protect your camera and install on your tripod at the same time. 6. This silicone camera case fits for Canon EOS 5D Mark II Camera.Specification: General Compatible with Canon:  EOS 5D Mark II Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 24cm * 15cm * 2cm / 9.45inch * 5.91inch * 0.79inch Qty per Carton 200 Carton Weight 26.00kgs / 57.32lb Carton Size 50cm * 32cm * 42cm / 19.69inch * 12.6inch * 16.54inch Loading Container 20GP: 396 cartons * 200 pcs = 79200 pcs 40HQ: 921 cartons * 200 pcs = 184200 pcs

Read more less

1. It is made of stretchable, tenacious, soft high quality natural silicone material. 2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely. 3. Compact, light, and extremely durable design, lightweight, convenient to carry. 4. Internal soft design gives you a soft and comfortable touch. 5. Simple and easy to use, protect your camera and install on your tripod at the same time. 6. This silicone camera case fits for Canon PowerShot G7 X Mark III / G7X III / G7X3 Camera.Specification: General Compatible with Canon:  PowerShot G7 X Mark III Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 22cm * 15cm * 2cm / 8.66inch * 5.91inch * 0.79inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 32cm * 37cm / 19.69inch * 12.6inch * 14.57inch Loading Container 20GP: 450 cartons * 200 pcs = 90000 pcs 40HQ: 1045 cartons * 200 pcs = 209000 pcs

Read more less

1. It is made of stretchable, tenacious, soft high quality natural silicone material. 2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely. 3. Compact, light, and extremely durable design, lightweight, convenient to carry. 4. Internal soft design gives you a soft and comfortable touch. 5. Simple and easy to use, protect your camera and install on your tripod at the same time. 6. This silicone camera case fits for Canon EOS 600D Camera.Specification: General Compatible with Canon:  EOS 600D Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 24cm * 15cm * 2cm / 9.45inch * 5.91inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 50cm * 32cm * 42cm / 19.69inch * 12.6inch * 16.54inch Loading Container 20GP: 396 cartons * 200 pcs = 79200 pcs 40HQ: 921 cartons * 200 pcs = 184200 pcs

Read more less

1. The reflector has 2 different reflecting surfaces, namely black, white, gold, silver and soft light 2. Using it you can get the effect you want, suitable for photo studios or outdoor photography. 3. The wavy texture fabric can optimize the reflection, so that the light is more evenly reflected, and it is not easy to produce light spots 4. The round reflector has a larger fill-in area, which can fill the entire body of the model. 5. It can be folded and stored when not in use, which does not take up space and is convenient for shootingSpecification: Package Weight One Package Weight 0.54kgs / 1.19lb One Package Size 40cm * 40cm * 3cm / 15.75inch * 15.75inch * 1.18inch Qty per Carton 20 Carton Weight 11.60kgs / 25.57lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 20 pcs = 4860 pcs 40HQ: 566 cartons * 20 pcs = 11320 pcs

Read more less