Consumer Electronics

1. Size: 11.2*9*3cm 2. Weight: 150g 3. USB port output no-load voltage: 4.90-5.30V; designate slot 4 as USB output 4. Output current: 1000 m A 5. When the load is 1000 mA, the output voltage of the port is 4.75-5.25V. 6. Input power supply: Micro USB DC 5V/2A 7. Keyboard: In the case of electrification, hold down the selection key at any time and hold for 2 seconds to change the charging current of 500 mA 700 mA 1000 mA 2000 mA;When charging the battery, press the selection key to change the type of charging battery. When the type of charging battery needs to be selected (example 3.20V 3.85V), the battery will be charged for 5 seconds. 8. LED: The charger is connected with 5V power supply. All the LEDs of the charger are on at once. If the battery is not put into the charging tank, the 500mA (LED) indicator is always on and the other lights are off. When the battery is detected, four LED lights will be on and 3.7 LED lights will flicker. At this time, you can choose the type of battery to charge by pressing the button. If not, after 5 seconds, the battery will be charged by default identification. At this time, the charging indicator will flicker according to the corresponding power ratio. By pressing the button lightly, you can inquire about the charging type (without power indication) and return to the charging state after 5 seconds. When the battery is not powered on, load the battery and check the power ratio (5 seconds later, you need to check and press again). USB output indication: When the USB output is detected, the power indicator lights up 10 seconds later, and the button can check the power. 9. Compatible Batteries: Li-ion/IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR 123), 14500, 10440 Warning 1. The charger can only charge cylindrical lithium-ion batteries (3.7V, 3.8V), nickel-hydrogen/nickel-cadmium and lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Charge with 5V USB adapter (adapter current recommendation 2A); 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.

Read more less

1. Size: 16.2*9.6*3.6cm 2. Weight: 200g 3. DC input voltage: 12V/2.0A 4. USB is only used as 5V mobile output, the output current is 1000mA, and the output of USB connected to power supply is invalid. 5. USB 5V output is only valid for 3.7V lithium battery, and Ni-MH boost is not valid. 6. Charging current of lithium battery: 4.2V 300mA/500mA/700mA/1000mA 7. Charging current of Ni-MH battery: 1.48V 300mA/500mA/700mA/1000mA 8. Charger has 6 keys, mode selection key (MODE), current selection key (CURREN), independent selection and view data key (1234), which is simple and convenient to use. 9. In any case, hold down the MODE key and hold for 3 seconds to change the CHARGE (charging) mode or FAST TEST, NOR TEST (capacity detection) mode, and then press the corresponding function button again in 8 seconds to change. It can enter the working state eight seconds after the current, independent, mixed charging, capacity detection and selected function. In the working state, it can press the (1234) key lightly to view the current (mA)./ Capacity (mAh) / Voltage (V) / Time (h) / Internal Resistance (mR) Data Reference Value. 10. Specifications of rechargeable batteries: 18650, 26650, 14500, AA, AAA, etc. Warning 1. The charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries, but not lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Do not use other power adapters. 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.

Read more less

1. Size: 16.2*9.6*3.6cm 2. Weight: 200g 3. DC input voltage: 12V/2.0A 4. USB is only used as 5V mobile output, the output current is 1000mA, and the output of USB connected to power supply is invalid. 5. USB 5V output is only valid for 3.7V lithium battery, and Ni-MH boost is not valid. 6. Charging current of lithium battery: 4.2V 300mA/500mA/700mA/1000mA 7. Charging current of Ni-MH battery: 1.48V 300mA/500mA/700mA/1000mA 8. Charger has 6 keys, mode selection key (MODE), current selection key (CURREN), independent selection and view data key (1234), which is simple and convenient to use. 9. In any case, hold down the MODE key and hold for 3 seconds to change the CHARGE (charging) mode or FAST TEST, NOR TEST (capacity detection) mode, and then press the corresponding function button again in 8 seconds to change. It can enter the working state eight seconds after the current, independent, mixed charging, capacity detection and selected function. In the working state, it can press the (1234) key lightly to view the current (mA)./ Capacity (mAh) / Voltage (V) / Time (h) / Internal Resistance (mR) Data Reference Value. 10. Specifications of rechargeable batteries: 18650, 26650, 14500, AA, AAA, etc. Warning 1. The charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries, but not lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Do not use other power adapters. 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.

Read more less

1. Size: 14.7*10*3.7 2. Weight: 221g 3. Input power supply: AC power cord 110-240V 50/60Hz (standard built-in power supply)/DC 12V 1A (optional) 4. Output Voltage: DC 4.2V for Li-Ion, DC 4.35V for IMR, DC 3.65V for LiFePO4, DC 1.48V for NiMH/NI-Cd 5. Output current: Li-Ion/IMR/LiFePO4 2000mA*1 (only the fourth channel), 1000mA*2, 500mA*3, 500mA*4, NiMH/NiCd: 1000mA*2, 500mA*3, 500mA*4 6. Mode: Each of the four buttons controls a slot. Within 5 seconds after power-on is put into the battery, the type of rechargeable battery can be selected by clicking the mode key of the corresponding slot. After 5 seconds, the type of rechargeable battery (e.g. 3.20V 3.80V) needs to be selected, the battery can be charged. 7. LCD: When the charger is connected to the power supply, the LCD display will be fully displayed for 3 seconds. If the battery is not placed in the charging tank, the LCD display null. 30 seconds after no operation, the display will be extinguished. When the battery is detected, the LCD displays the corresponding slot number and the battery type symbol (Li-ion-3.70V) flickers. If not, click the Mode key to select the type of battery to charge. If not, the battery will be charged in 5 seconds after entering the default recognition. At this time, the charge display percentage symbol flickers to indicate that the charging is going on, and the voltage, capacity and time are displayed. The percentage shows 100% when charging is completed and End is shown at the lower right. 8. Compatible battery types and models: Li-ion/IMR/LiFePO4: 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440; NiMH/Cd: AA, AAA, SC, C Warning: 1. The charger can only charge cylindrical lithium-ion batteries (3.7V, 3.8V), nickel-hydrogen/nickel-cadmium batteries (1.2V) and lithium iron phosphate batteries (3.2V). 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. If the 12V DC adapter is chosen, the output current should be no less than 1A. 4. Charger charging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.

Read more less

1. Input: Micro USB DC 5V/2A 2. Output: 4.2V+/-1% / 1.45V+/-1%, 1A*2 / 0.5A*2 or 5V USB/1A 3. Compatible with: 26650, 18650, 18490, 18350, 17670, 14500, 10440, 16340(RCR123) IMR/Li-on battery or AA, AAA, AAAA, C Ni-MH/Ni-Cd battery 4. Put Li-on battery into the slot, with 5V output, it can be used as power bank. 5. Automatically stops charging when complete. 6. Package Include: - Battery charger x 1 - USB cable x 1 - User manual x 1

Read more less

1. Brand new and high quality. 2. USB input, wide compatibility. 3. Independent line charging: 400mAh + 400mAh. 4. Indicator light to show battery level. 5. Charges 1.2V and 3.7V rechargeable batteries.

Read more less

1. Active current distribution (ACD) technology. 2. Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries. 3. Charging Program Optimized for IMR batteries. 4. Automatic current selection based on battery capacity. 5. Automatic identification of non-rchargeable lithium batteries. 6. Capable of charging 2 batteries simultaneously. 7. Each of the 2 battery slots monitors and charges independently. 8. Automatically detects battery power status and displays charging progress. 9. Automatically stops charging when complete. 10. Reverse polarity protection and short circuit prevention. 11. Over-dischargerged battery activation. 12. Overcharging timeout protection. 13. Designed for optimal heat dissipation. 14. Made from fire resistant, flame retardant PC materials. 15. During the charging process, the indicator LED indicate the status and charging pencentages of the batteries. 16. Compatible with Li-ion / IMR / LiFePO4 (10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, Ni-MH and Ni-Cd (AA, AAA, AAAA, C, D) rechargeable batteries (Note: All batteries are not included). 17. Input voltage: - AC 100-240V 50/60 Hz 0.25A (MAX) 8W - DC 9-12V 1A 18. Output voltage: 4.35V +/- 1% / 4.2V +/- 1% / 3.7V +/- 1% / 1.48V +/- 1% 19. Output current: 500mA x 2 / 1000mA x 1 20. Certified by RoHS, CE, FCC, CEC.

Read more less

1. Capable of charging 2 batteries simultaneously. 2. Each of the two battery slots monitors and charges independently. 3. Optimized charging design for IMR batteries. 4. Integrated LCD panel clearly displays charging parameters and progress. 5. Two conveniently located side buttons allow easy selection of specific battery types and charging parameters. 6. Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt). 7. Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection). 8. Compatible with LiFePO4 batteries. 9. Compatible with small capacity batteries. 10. Automatically stops charging when complete. 11. Features over-charge prevention to protect batteries. 12. Features temperature monitoring to prevent overheating. 13. Made from durable ABS (fire retardant / flame resistant). 14. Features reverse polarity protection. 15. Designed for optimal heat dissipation. 16. Compatible with Li-ion / IMR / LiFePO4: 10440, 14500, 16340 (RCR123), 17500, 17670, 18350, 18490, 18650, 22650, 26650, Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries (Note: All batteries are not included). 17. Input voltage: - AC 100-240V 50/60 Hz 0.25A (MAX) - DC 12V 1A 18. Output voltage: 4.2V +/- 1% / 3.7V +/- 1% / 1.48V +/- 1% 19. Output current: 500mA x 2 20. Certified by RoHS, CE, FCC, CEC.

Read more less

1. Capable of charging 4 batteries simultaneously 2. Each of the four battery slots monitors and charges independe ntly 3. Compatible with and identifies Li-ion (26650, 22650, 18650, 1 7670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries 4. Optimized charging design for IMR batteries 5. Integrated LCD panel clearly displays charging parameters and progress 6. Two conveniently located side buttons allow easy selection of specific battery types and charging parameters 7. Intelligent circuitry detects the battery type and status bef ore entering automatic charge mode (CC, CV, dV/dt) 8. Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection) 9. Compatible with LiFePO4 batteries 10. Compatible with small capacity batteries 11. Automatically stops charging when complete 12. Features over-charge prevention to protect batteries 13. Features temperature monitoring to prevent overheating 14. Made from durable ABS (fire retardant / flame resistant) 15. Features reverse polarity protection 16. Designed for optimal heat dissipation 17. Certified by RoHS, CE, FCC, CEC 18. Note: Not included all the batteries.

Read more less

1. Active current distribution (ACD) technology. 2. Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries. 3. Charging Program Optimized for IMR batteries. 4. Automatic current selection based on battery capacity. 5. Automatic identification of non-rchargeable lithium batteries. 6. Capable of charging 4 batteries simultaneously. 7. Terminating threshold for battery voltages and Charging current can be set independently for each individual slot. 8. Automatic adoption between 3 charge modes (CC, CV, dV/dt). 9. Automatically detects battery power status and displays charging progress. 10. Automatically stops charging when complete. 11. Reverse polarity protection and short circuit prevention. 12. Over-dischargerged battery activation. 13. Overcharging timeout protection. 14. Designed for optimal heat dissipation. 15. Made from fire resistant, flame retardant PC materials. 16. During the charging process, the indicator LED indicate the status of the batteries. 17. Compatible with Li-ion / IMR / LiFePO4 (10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, Ni-MH and Ni-Cd (AA, AAA, AAAA, C, D) rechargeable batteries (Note: All batteries are not included). 18. Input voltage: - AC 100-240V 50/60 Hz 0.25A (MAX) 10W - DC 9-12V 1A 19. Output voltage: 4.35V +/- 1% / 4.2V +/- 1% / 3.7V +/- 1% / 1.48V +/- 1% 20. Output current: 1.5A x 1 / 0.75A x 2 / 0.5A x 2 / 0.375A x 4 21. Certified by RoHS, CE, FCC, CEC.

Read more less

1. Two in one (18650 battery charger and smart mobile power), smart LCD display. 2. Each slot has a separate charging circuit and display that works independently. 3. Reverse polarity protection. 4. When charging the device, the LCD displays the output voltage and output current. When charging the battery, the LCD displays the input charging status. 5. When inputting and outputting at the same time, it will automatically charge the device first and then charge the battery. 6. Does not work, automatically turns off after 20 seconds, automatically turns on after charging, and automatically stops working after the output current is overcharged. 7. Press the backlight on/off for less than one second and turn the machine on/off for two seconds. 8. The maximum output current of the USB 1A output is limited to 1.5A, and the maximum output current of the USB 2A output is limited to 2.2A. 9. With dual output USB, both devices charge simultaneously. When outputting simultaneously, the total output current of the two USB ports is 2.2A. If the total output current is greater than 2.2A, the latest USB port will stop working.

Read more less

1. 8-slot independent charging, can charge eight AAA, AA batteries simultaneously or at will. 2. 100-240V voltage, universal worldwide. 3. 360-degree large area heat dissipation, reducing the load on the charger. 4. Intelligent chip, multiple protection, safer charging. 5. 38 copper core wires, corrosion-resistant, anti-oxidation, extend the life of the wires. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 2.4V 800mA. 3. Suitable for battery types: Ni-MH, Ni-Cd rechargeable batteries. 4. Size: 17.5x9x2.9cm. 5. Charging interface: external power supply. Packing list: Charger host x 1 Adapter x 1 Manual x 1

Read more less

1. 8-slot independent charging, can charge eight AAA, AA batteries simultaneously or at will. 2. 100-240V voltage, universal worldwide. 3. 360-degree large area heat dissipation, reducing the load on the charger. 4. Intelligent chip, multiple protection, safer charging. 5. 38 copper core wires, corrosion-resistant, anti-oxidation, extend the life of the wires. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 2.4V 800mA. 3. Suitable for battery types: Ni-MH, Ni-Cd rechargeable batteries. 4. Size: 17.5x9x2.9cm. 5. Charging interface: external power supply. Packing list: Charger host x 1 Adapter x 1 Manual x 1

Read more less

1. 8-slot independent charging, can charge eight AAA, AA batteries simultaneously or at will. 2. 100-240V voltage, universal worldwide. 3. 360-degree large area heat dissipation, reducing the load on the charger. 4. Intelligent chip, multiple protection, safer charging. 5. 38 copper core wires, corrosion-resistant, anti-oxidation, extend the life of the wires. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 2.4V 800mA. 3. Suitable for battery types: Ni-MH, Ni-Cd rechargeable batteries. 4. Size: 17.5x9x2.9cm. 5. Charging interface: external power supply. Packing list: Charger host x 1 Adapter x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. AC 100-240V wide voltage, universal worldwide. 3. Multiple protections, more at ease of use. 4. LED indicator shows charging status. 5. The flip cover design prevents the charger equipment from being damaged. 6. The power cord is 1m long, free from distance constraints, making it easier to use. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 600mA, 9V 25mA, AA / AAA / SC / C / D 150mA. 3. No-load power consumption: 1W (maximum). 4. Full-load power consumption: 5W (maximum). 5. Size: 19.5x9.3x5.3cm. Packing list: Charger host x 1 Power cable x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. AC 100-240V wide voltage, universal worldwide. 3. Multiple protections, more at ease of use. 4. LED indicator shows charging status. 5. The flip cover design prevents the charger equipment from being damaged. 6. The power cord is 1m long, free from distance constraints, making it easier to use. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 600mA, 9V 25mA, AA / AAA / SC / C / D 150mA. 3. No-load power consumption: 1W (maximum). 4. Full-load power consumption: 5W (maximum). 5. Size: 19.5x9.3x5.3cm. Packing list: Charger host x 1 Power cable x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. AC 100-240V wide voltage, universal worldwide. 3. Multiple protections, more at ease of use. 4. LED indicator shows charging status. 5. The flip cover design prevents the charger equipment from being damaged. 6. The power cord is 1m long, free from distance constraints, making it easier to use. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 600mA, 9V 25mA, AA / AAA / SC / C / D 150mA. 3. No-load power consumption: 1W (maximum). 4. Full-load power consumption: 5W (maximum). 5. Size: 19.5x9.3x5.3cm. Packing list: Charger host x 1 Power cable x 1 Manual x 1

Read more less

1. 4-slot independent charging, which can charge AAA and AA batteries at the same time or at random, and can charge two 9V Ni-MH batteries. 2. AC 100-240V wide voltage, universal worldwide. 3. Automatically cut off the lights when fully charged to protect the battery. 4. Multiple protections, use more at ease. 5. LED indicator shows charging status. 6. The groove design is convenient for quickly removing the battery. Product parameters: 1. Input: AC 100-240V, 50 / 60Hz. 2. Output: DC 1.2V 200mA, AA 200mA x 4, AAA 100mA x 4, 9V Ni-MH battery 30mA x 2. 3. Size: 12x7.4x3.7cm. 4. Material: ABS + PC fireproof material. Packing list: Charger host x 1 Power cord x 1 Manual x 1

Read more less

1. Automatic recognition and conversion can charge various 3.6V lithium-ion batteries. 2. The maximum detection of current and voltage, self-stop when full, to protect the battery. 3. The LCD screen percentage shows the charging progress during charging, and can be plugged in for a long time. 4. Comprehensive protection function, the battery is installed in reverse, short circuit is not charged, and it is absolutely impossible to charge ordinary batteries. 5. Support all 5V charging heads on the market. Product parameters: 1. Size: 145x100x30mm. 2. No-load voltage: 5V +/- 0.2V. 3. Constant current charging current: 0.5A range 500 +/- 50mA. 4. Charging cut-off voltage: 4.20 +/- 0.05V. 5. Charging cut-off current: 0.5 level is less than or equal to 70mA. 6. Trickle charge current: 0.5A range 60 +/- 20mA. 7. External power supply standby current: less than or equal to 60mA. 8. Automatic recharge interval voltage: 3.9 +/- 0.15V. 9. Working environment temperature: 0-40 degrees celsius.

Read more less

1. Two-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at will. 2. Fast charging. 3. Multiple protections, more at ease of use. 4. LED indicator shows charging status. 5. Cooling grid to prevent the equipment from being damaged due to high temperature. Product parameters: 1. Input: AC 220V, 50 / 60Hz. 2. Output: DC 1.2V 500mA. 3. Size: 12.3x9.4x3.5cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. Automatically trickle charging to protect the battery. 6. Car-mounted and discharge function, continuous power when going out. 7. Flip cover design to prevent damage to charger equipment. Product parameters: 1. Input: AC 100-240V, 110W (maximum), DC 12V 800mA. 2. Output: 4.8V 1000mA, 9V 25mA (AA / AAA / C / D: 1000mA with one and four currents). 3. Size: 19.5x9x5cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. Automatically trickle charging to protect the battery. 6. Car-mounted and discharge function, continuous power when going out. 7. Flip cover design to prevent damage to charger equipment. Product parameters: 1. Input: AC 100-240V, 110W (maximum), DC 12V 800mA. 2. Output: 4.8V 1000mA, 9V 25mA (AA / AAA / C / D: 1000mA with one and four currents). 3. Size: 19.5x9x5cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA, AA, C or D batteries at the same time or at random, and can charge two 9V batteries 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. Automatically trickle charging to protect the battery. 6. Car-mounted and discharge function, continuous power when going out. 7. Flip cover design to prevent damage to charger equipment. Product parameters: 1. Input: AC 100-240V, 110W (maximum), DC 12V 800mA. 2. Output: 4.8V 1000mA, 9V 25mA (AA / AAA / C / D: 1000mA with one and four currents). 3. Size: 19.5x9x5cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA and AA batteries simultaneously or at will. 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. The flip cover design prevents the charger equipment from being damaged. Product parameters: 1. Input: AC 100-240V. 2. Output: 1.4V. 3. Charging current: 1200mA. 4. Charging time: 4 hours. 5. Size: 11.5x6.6x3.1cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA and AA batteries simultaneously or at will. 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. The flip cover design prevents the charger equipment from being damaged. Product parameters: 1. Input: AC 100-240V. 2. Output: 1.4V. 3. Charging current: 1200mA. 4. Charging time: 4 hours. 5. Size: 11.5x6.6x3.1cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA and AA batteries simultaneously or at will. 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. The flip cover design prevents the charger equipment from being damaged. Product parameters: 1. Input: AC 100-240V. 2. Output: 1.4V. 3. Charging current: 1200mA. 4. Charging time: 4 hours. 5. Size: 11.5x6.6x3.1cm.

Read more less

1. 4-slot independent charging, which can be used to charge AAA and AA batteries simultaneously or at will. 2. Multiple protections, safer to use. 3. LCD display shows charging status. 4. AC 100-240V wide voltage, universal worldwide. 5. The flip cover design prevents the charger equipment from being damaged. Product parameters: 1. Input: AC 100-240V. 2. Output: 1.4V. 3. Charging current: 1200mA. 4. Charging time: 4 hours. 5. Size: 11.5x6.6x3.1cm.

Read more less

1. Material composition: ABS + fireproof material2. Applicable models for Makita BL1415, BL1430, BL1445, BL1815, BL1830, BL1845 and other battery packs.3. Input voltage: 14.4V, 18V4. Input current: 2A5. Output voltage: 5V6. Output current: 2A7. Function: Solve the trouble of running out of power at any time8. Package include: 1 x Adapter

Read more less

1. Material composition: ABS + fireproof material2. Applicable models for Makita BL1415, BL1430, BL1445, BL1815, BL1830, BL1845 and other battery packs.3. Input voltage: 14.4V, 18V4. Input current: 2A5. Output voltage: 5V6. Output current: 2A7. Function: Solve the trouble of running out of power at any time8. Package include: 1 x Adapter

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understanding

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understanding

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understanding

Read more less

1. Model: 186502. Color: Black3. Material: ABS4. Arrangement: can be parallel or series5. Small size, easy to carry6. 1x 18650 battery holder: about 7.6x2cm7. 2x 18650 battery holder: about 7.6x3.9cm8. 3x 18650 battery holder: about 7.6x5.9cm9. 4x 18650 battery holder: about 7.6x7.9cm10. The battery holder is one or more compartments or compartments for containing batteries. For dry batteries, the holder must also make electrical contact with the battery terminals. For wet batteries, the cable is usually connected to the battery terminals, as seen in automobiles or emergency lighting equipment. If the battery is expected to continue to be used throughout the life of the product, there is no need to use a holder, and the tabs soldered to the battery terminals can be directly soldered to the printed circuit board. A good choice for you!feature:11. Note: Due to different displays and different lighting, the picture may not show the actual color of the item. Thanks for your understanding

Read more less

1. Number of slots: 42. Charging time: 1 (h)3. Battery type: lithium ion battery4. Input parameters: 5V2A, output parameters: 115. Charging current: 100 (mA), discharging current: 1000 (mA)6. Intelligent recognition7. USB interface connection8. Automatic stop when full, overcharge protection9. Capacity test, activate battery10. Support lithium ion, lithium iron phosphate, nickel-hydrogen nickel-chromium, 5th and 7th batteries11. Unit weight: 0.17kg12. Dimensions: 4.92x3.77x0.94 inchNote: Not included battery

Read more less

1. Four protections: Overcharge protection/overdischarge protection/overtemperature protection/overcurrent protection2. USB interface charging, compact and easy to carry3. Power indicator function, red light when charging, green light when full4. Compatible with multiple batteries: 10440/14500/16340/16650/14650/18350/18500/186505. A single gross weight is about 35 g

Read more less

1. Material: ABS2. Size: about 9.95x6.6x2.6 cm3. Weight: about 67 grams4. Input: AC 100-240V 50/60Hz5. Output: 2.4V DC 400mA, AA 200mAx2, AAA 200mAx4, AAA 100mAx2, AAA 100mAx4, USB 5V 500mA6. Battery charging: 2 and 4 5/7 batteries can be charged, not single charge, 5/7 batteries can be mixed7. Features: It is equipped with over-temperature protection. When the battery or charger temperature is greater than 60 degrees Celsius during charging, the charging will be automatically stopped to ensure safe charging. The positive and negative electrodes are stamped and equipped with USB charging ports, which can charge mobile phones or tablets and other devices , Curved groove design, easy to remove the battery after fully charged, LED indicator, red light when charging, automatic light off when fully charged, seven safety intelligent protection (temperature/short circuit/input overvoltage/output overvoltage/overcharge /Overcurrent/undervoltage protection), ABS shell, piano paint on the surface, easy to carry8. Note: It is not possible to charge the rechargeable battery and use the USB port to charge the mobile phone or tablet and other devices at the same time, they must be used separately

Read more less

1. Material: ABS2. Size: about 9.95x6.6x2.6 cm3. Weight: about 67 grams4. Input: AC 100-240V 50/60Hz5. Output: 2.4V DC 400mA, AA 200mAx2, AAA 200mAx4, AAA 100mAx2, AAA 100mAx4, USB 5V 500mA6. Battery charging: 2 and 4 5/7 batteries can be charged, not single charge, 5/7 batteries can be mixed7. Features: It is equipped with over-temperature protection. When the battery or charger temperature is greater than 60 degrees Celsius during charging, the charging will be automatically stopped to ensure safe charging. The positive and negative electrodes are stamped and equipped with USB charging ports, which can charge mobile phones or tablets and other devices , Curved groove design, easy to remove the battery after fully charged, LED indicator, red light when charging, automatic light off when fully charged, seven safety intelligent protection (temperature/short circuit/input overvoltage/output overvoltage/overcharge /Overcurrent/undervoltage protection), ABS shell, piano paint on the surface, easy to carry8. Note: It is not possible to charge the rechargeable battery and use the USB port to charge the mobile phone or tablet and other devices at the same time, they must be used separately

Read more less

1. Material: ABS2. Size: about 9x6.7x3.74 cm3. Weight: about 78 grams4. Input: AC 100-240V 50/60Hz5. Output: 9V Ni-MH battery 9V DC 50mAx1, 50mAx2, 9V lithium battery 9V DC 120mAx1, 120mAx26. Applicable battery: 9V lithium battery/NiMH/NiCd rechargeable battery7. Features: automatic power off when fully charged, LED light to indicate the charging process, automatic light off when fully charged, smart chip, over-current protection, over-temperature protection (when the battery or charger temperature is higher than 60 degrees Celsius when charging, the charging will stop automatically) to ensure safety Charging, exquisite and compact, easy to carry, simple operation8. Note: Only the charger, not the battery in the picture

Read more less

1. Material: ABS2. Size: about 9x6.7x3.74 cm3. Weight: about 78 grams4. Input: AC 100-240V 50/60Hz5. Output: 9V Ni-MH battery 9V DC 50mAx1, 50mAx2, 9V lithium battery 9V DC 120mAx1, 120mAx26. Applicable battery: 9V lithium battery/NiMH/NiCd rechargeable battery7. Features: automatic power off when fully charged, LED light to indicate the charging process, automatic light off when fully charged, smart chip, over-current protection, over-temperature protection (when the battery or charger temperature is higher than 60 degrees Celsius when charging, the charging will stop automatically) to ensure safety Charging, exquisite and compact, easy to carry, simple operation8. Note: Only the charger, not the battery in the picture

Read more less

1. Material: ABS+PC2. Size: about 9.2x9.8x3.8 cm3. Weight: about 83.8 grams4. Input: AC 100V 60Hz5. Output: 8.4V DC 600mA, 8.4V 400mAx1, 8.4V 150mAx46. Applicable battery: 9V lithium rechargeable battery7. Number of rechargeable batteries 1-48. Features: Intelligent control of the light does not turn on when the power is turned on but the battery is not discharged, the blue light is on when charging, the light is automatically turned off when fully charged, the charging status is intelligently recognized, the power is automatically turned off, seven safety intelligent protection (temperature/short circuit/input overvoltage) /Output overvoltage/overcharge/overcurrent/undervoltage protection), ABS+PC environmental protection material, safe and non-toxic, surface piano paint process, exquisite and compact, easy to carry

Read more less

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as charging

Read more less

1. Built-in high-precision single-chip microcomputer, automatically stop charging after the battery is full, safe and secure2. LCD display shows the real-time charging status of the battery3. Charging anytime, anywhere, Micro USB input, power supply and solar energy, no need to worry about not being able to charge outdoors4. It can charge 4 batteries at the same time, saving time and improving efficiency5. Purpose: capacity test, internal resistance test, storage function, real-time current6. Number of slots: 47. Working temperature: 0-40 degrees Celsius8. Input voltage / current: 5V / 3A, 9V / 2A9. Charging current: 500mA, 1000mA, 2000mA, 3000mA10. Output current: less than or equal to 120mA11. Output voltage: 4.2V / 1.42V12. Note: The product only contains the charger, does not contain other accessories such as batteries13. Size: 149x115x35mm14. Weight: 212gFor battery1.3.6V / 3.7V IMR / Li-ion / LiFePO4: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700 , 21700, 22500, 22650, 25500, 26500, 26650, 267002.1.2V Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Read more less

1. Manually adjust the DIY current in one step2. 8 slots are independent, safe and convenient without affecting each other, and the performance is more stable3. VA LCD display, intuitively and clearly displays the real-time battery status information4. Type-c port input supports QC 3A fast charge5. Purpose: capacity test, internal resistance test, storage function, real-time current6. Number of slots: 87. Working temperature: 0-40 degrees Celsius8. Input voltage / current: 5V / 2A, 9V / 2A9. Charging current: 3A x 1 / 2A x 2 / 1A x 4 / 0.5A x 8 / 0.25A x 810. Charging cut-off current: less than or equal to 120mA11. Charging cut-off voltage: 4.2V12. Note: The product only contains the charger, does not contain other accessories such as batteries13. Dimensions: 194x134x34mm14. Weight: 350g15. Applicable battery1.3.6V / 3.7V Li-ion battery: 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 266502.1.2V Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D, SC

Read more less

1. Number of slots: UMS4: 4 slots, UMS2: 2 slots2. Input voltage/current: DC 5V/2A, 12V/1.5A3. Rated power: 18w4. Output voltage: 4.35V / 4.2V / 3.7V / 1.48V5. Note: The product only contains the charger, without batteries and other accessoriesOutput current:1. Fast charge mode: 3000mA x 1, 2000mA x 2, 1000mA x 42. Standard mode: 2000mA x 1, 1000mA x 2, 500mAx 4Universal battery1. IMR / Li-ion / LiFePO4: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500 , 22650, 25500, 26500, 26650, 267002. Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Read more less

1. Number of slots: UMS4: 4 slots, UMS2: 2 slots2. Input voltage/current: DC 5V/2A, 12V/1.5A3. Rated power: 18w4. Output voltage: 4.35V / 4.2V / 3.7V / 1.48V5. Note: The product only contains the charger, without batteries and other accessoriesOutput current:1. Fast charge mode: 3000mA x 1, 2000mA x 2, 1000mA x 42. Standard mode: 2000mA x 1, 1000mA x 2, 500mAx 4Universal battery1. IMR / Li-ion / LiFePO4: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500 , 22650, 25500, 26500, 26650, 267002. Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Read more less

1. LCD display screen clearly shows the real-time battery status information2. The 4 slots are independent, safe and convenient without affecting each other, and the performance is more stable3. Purpose: capacity test, internal resistance test, storage function, real-time current4. Slot position: 4 slots5. Input voltage/current: DC 5V/2A, 9V/2A6. Output voltage: 4.35V / 4.2V / 3.7V / 1.48V7. Charging time: 2h8. Rated power: 18w9. Charging current: 1500mA10. Note: The product only contains the charger, does not contain other accessories such as batteries11. Size: 159x107x41mmOutput current:1. Fast charge mode: 1500mA x 1, 1500mA x 2, 750mA x 42. Standard mode: 1500mA x 1, 1000mA x 2, 500mA x 4General battery:1. IMR / Li-ion / LiFePO4: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500 , 22650, 25500, 26500, 26650, 267002. Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Read more less

1. USB charging input, intelligently adapted charging mode2. Two slots are controlled independently, without affecting each other3. Multiple protections, safe charging4. Compatible with 20700/21700 and other lithium batteries5. Lightweight and portable, with outdoor charging6. If the battery is over-discharged due to improper storage or use, the charger will automatically detect and activate the battery7. Support curl charging, effectively protect the battery and extend battery life8. Working temperature: 0-40 degrees Celsius9. Packing list: charger, USB data cable, user manual10. Note: The product only contains the charger, does not contain other accessories such as batteries

Read more less

1. Four-slot independent programming professional test charger2. Five functions: charge, discharge, discharge refresh, capacity test, internal resistance test3. Different models, different brands, and different capacities for mixed charging4. Mixed charging and discharging of any combination of 1-4 batteries5. The large-size white backlit display is convenient for users to check the working mode, battery parameters, etc.6. The scientific ventilation slot can quickly dissipate the heat inside the charger, ensure a good working environment for the circuit components, and prolong the service life7. Adopting high-integration large-scale single-chip microcomputer, with strong I/O performance, fast running speed and strong instruction set8. Temperature control design. The charger first relies on the metal sheet in close contact with the battery body to conduct the heat of the battery to the metal sheet, and then uses a temperature sensor-thermistor fixed with thermally conductive silica gel to convert the temperature into an electrical signal and send it to the microcontroller The port of the A/D converter is converted into a digital signal for the single-chip microcomputer to identify and perform corresponding processing according to the measured battery temperature value, temperature protection or normal charging, which guarantees the charging speed and the safety of battery charging9. The channels do not interfere with each other. Each battery can be fully charged and automatically stop charging. Under the premise of ensuring full charge, the battery will not be overcharged to damage the battery, which can extend the service life of the battery.10. Selection of the working mode of the charger: insert the battery and power on, the charger first self-checks, after the self-check is completed, press the MODE button for 5 seconds, the screen content starts to flash, and then press the MODE button successively. You can choose from five modes: CHARGE, DISCHARGE, DISCHARGE REFRESH, CHARGE TEST, and QUICK TEST. After selecting the working mode, wait for 10 seconds to automatically enter the newly selected working mode11. Charging mode: This mode intelligently charges the battery according to the default charging current or the current selected by the user. The default charging current is 400MA and blinking. At this time, you can press CURRENT to adjust the charging current, and you can choose the charging current 500mA / 700mA / 1000mA / 200mA / 300mA / 400mA / (Only in the case of one or four slots, it can reach 1000MA) It will automatically stop after being fully charged. The capacity shows the capacity charged to the battery this time, not the true capacity of the battery.12. Discharge mode: After this mode, the default discharge current is 300mA and flashes. At this time, you can press CURRENT to adjust the discharge current. The discharge current can be selected as 400mA / 500mA / 100mA / 200mA / Start to discharge according to the selected current, but the battery voltage reaches The discharge ends after 0.9v. This mode should be used periodically to ensure that the battery is kept in the best condition. Note that the battery is fully discharged after the discharge mode is completed. If necessary, you need to charge the battery immediately in the charging mode.13. Refresh mode: This mode adjusts the battery internally according to the discharge-charge-discharge-charge-discharge-charge mode to reduce the internal polarization of the battery. This mode is used to repair the battery with degraded performance, or the battery performance is degraded due to improper use.14. Capacity test mode: This mode is used to test the true capacity of the battery. It operates according to the process of charge-discharge-charge to perform a discharge test on a fully charged battery. The displayed capacity is the true capacity of the battery, which truly reflects that the battery can The power provided for electrical appliances can also be tested and judged whether the battery is good or bad.15. Internal resistance test mode: This mode is used to quickly test the internal resistance of the battery. In this working mode, the internal resistance of the battery is quantitatively measured at an average working current of 500 mA inside the machine. Since the internal resistance of rechargeable batteries is generally very low, there may be some fluctuations sometimes due to the oxidation of the polar surface of the battery and the surface contact resistance. If there is uncertainty about the content of the test, it is recommended to measure several times in different battery slots, and then take the average value.16. Button for adjusting current: After the self-check is completed, the charger first displays the battery voltage, and then displays the default current of 400mA and flashes. If you need to adjust the charging current, press the CURRENT button within 3 seconds to adjust in steps of 200mA Current, the display value is 500mA / 700mA / 1000mA / 100mA / 200mA / cycle display (if you only charge 1-2 batteries and put them in 1 and 4 slots, you can choose 1000MA charging current), after selecting the charging current, If there is no button operation within 10 seconds, the flashing current will stop flashing and enter the charging stage according to the set current, and the battery will automatically stop charging when the battery is full.17. Display parameter switch key: during charging and discharging, press DISPLAY key to cycle display between current, voltage, capacity and time

Read more less