DJI Mavic Series

1. Suitable for DJI Mavic 2 Pro/Zoom drones2. Can be remotely dispatched, used for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc.3. USB charging, quick release, one-touch control by remote control.4. Lightweight and safe, neither adding to the burden of the drone nor damaging the drone, easy to install and remove.5. Bottom mounting kickstand, does not affect the propeller and sensors!Other parameters:1. Main material: ABS2. Built-in battery capacity of 150 mAh3. Charging interface: Micro-USB4. Charging time: 90 minutes5. Life span: charging once can be opened about 300 times6. Net weight: 85g7. Load weight: 500g (MAX)8. Product size: 10 x 5.5 x 8.5cmPacking list:Thrower x 1Booster stand x 4Rubber band x 2Bandage x 2Connection cable x 1Thrower charging cable x 1Packaging: boxed

Read more less

1. All-round protection, high hardness, to prevent collisions and scratches2. Full screen protection, shockproof and shatterproof, impact-proof, can withstand most of the daily bump3. Material: nano-material film4. Applicable models: for DJI Mavic 3 Classic5. Size: 17 x 9cm6. Weight: 13.5g

Read more less

1. Precise mold opening, small size and large capacity, can accommodate drones, it can store RC with screen remote control or ordinary remote control at the same time + 2 pieces of batteries + aircraft + charging butler + charger + other small accessories 2. PU leather fabric, exquisite appearance 3. Two-way zipper, smooth and not stuck 4. Unique rubber handle, easy to carry when going out 5. Using nylon fabric webbing, easy to adjust the length, light and wear-resistant 6. By adjusting the shoulder strap, the extra shoulder strap can be put into the hidden storage space on the back, and it can be easily turned into a handbag without affecting the appearance

Read more less

1. Specially designed for DJI Mavic 3 Classic, easy to store, compatible with RC/RC-N1 remote control and silicone case) 2. Stylish appearance, small size but large capacity, internal high-strength sponge design, effectively protect the fuselage; 3. Highly tight and waterproof, can withstand repeated watering tests; 4. Portable handle, strong load-bearing, comfortable hand feel, relieve hand pressure. 5. Dimensions: 42 x 34 x 15cm 6. Weight: 1.95kg

Read more less

1. Each blade has been checked by dynamic balance test. It has low flight noise and high aerodynamic efficiency2. Lower noise, longer range3. Specifications: Propeller X 1 pair4. Suitable for: for DJI Mavic 3 Classic / DJI Mavic 3 / DJI Mavic 3 Cine5. Diameter x pitch: 23.9 x 13.5 cm6. Weight: 8.5 grams per servingWarning sign:1. Please follow the instructions to install the blades2. If the blade is damaged during the use, please replace it as soon as possible

Read more less

1. Magnetic design, easy to install2. Designed for shooting in low light3. Support three levels of brightness adjustment and three levels of color temperature adjustment, to help you easily control the dark light shooting, always lighting up your beauty4. Range: 1.5-3 hours5. Power consumption: 0.38-0.79w6. Color temperature: 5000K (cold light) , 3500K (mixed light) , 2700K (warm light)7. Illumination: 20-40 lux8. Charging time: 35 minutes9. Charging temperature: 5-40 degrees celsius10. Service temperature: 0-40 degrees celsius11. Adapter products: for Osmo Mobile 6 / Osmo Mobile SE / DJI OM 5 / DJI OM 4 SE / DJI OM 412. Charging method: USB plug-in13. Closing size: 74.13 x 53 x 26.55 mm; spreading size: 105.91 x 53 x 26.55 mm14. Weight: 73gWarning sign:1. The use of special magnetic circuit closed design, will not affect the performance of the phone, because of the angle of part of the phone compass, there may be a need to calibrate the prompt, just according to the phone to calibrate normal use2. Contains magnet, in order to avoid magnetization effect, please stay away from magnetic card, IC card, artificial pacemaker, hard disk, RAM chip and other easily disturbed devices3. The function of the mobile phone which transmits data by magnetic signal will be affected by magnetic force. It is suggested to use this function after removing the mobile phone clip

Read more less

1. Made of high quality material, good toughness2. Separate the propeller from the outside to prevent the propeller from accidentally hurting people and things, and at the same time prevent foreign objects from hitting the propeller to improve flight safety3. Exquisite design, can be disassembled quickly4. Radius: 157mm5. Dimensions after installation: 634 × 549 × 108.5mm6. Weight: 58g/side7. Applicable models: DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine8. Packing list: propeller cover x 1 set(4 pieces)

Read more less

1. The design is simple and elegant, functional and practical2. Can accommodate three pieces of the battery and charging in turn, to go out when also can be used as mobile power for external devices3. Multi-battery charging, no need to wait in the next block to replace the battery, and equipped with smart indicator lights, charging state at a glance4. Support QC and USB PD fast charge, support up to 29W input5. Suitable for DJI Mini 2/DJI Mini SE6. Operating Temperature: 0-40 degrees celsius7. Enter: 5V/3A 9V/3A 12V/3A8.USB output: 5V/2A9. Charge time: about 240 minutes10. Suitable battery model: BWX161-2240-7.7/WX161-1065-7.6/MB2-2400mAh-7.2V/MB3-1100mAh-7.6V11. Weight: 72g

Read more less

1. Made of aluminum alloy, wear-resistant and durable2. The contact surface of the tooth-shaped rocker feels comfortable, sensitive to control, and improves user experience3. Small and light, can be easily stored in the remote control storage slot4. Detachable design for easy storage5. Material: aluminum alloy6. Applicable models: Mini 3 Pro7. Product size: 1.8 x 0.8 x 0.8 cm8. Weight: 3.6g/pair9. Packing list: Joystick x 1 pair

Read more less

1. For DJI Mini 3 Pro2. Available with ND16/64/256 light reduction filter set for daylight conditions3. For high light suppression and long exposure shooting, such as long exposure time lapse photography4. A wide range of landscapes can be captured5. Weight (individual): 0.75gPacking list:ND16 Scrimshaw x 1ND64 Scrimshaw x 1ND256 Scrimshaw x 1

Read more less

1. Each blade is checked by the precision dynamic balance, the flight noise is lower, the aerodynamic efficiency is higher, the power consumption is lower, and the endurance is improved2. Lower Noise, longer range3. Specifications: 1 pair of propeller4. Tip: please install the blades according to the instructions5. Adapters: for DJI Air 2S / Mavic Air 26. Size: 18.3 x 9.7 cm7. Single weight: 4.8 grams

Read more less

1. O3+ system image transmission, the signal is farther and more stable, supports image transmission distance of up to 15 kilometers, and the delay is as low as 120 milliseconds2. Adopts 5.5-inch 1080P high-brightness display, the global brightness of the screen can reach 1000 nits, and supports long-term high-brightness display3. Compatible with Wi-Fi 6 protocol, the download rate can reach 80MB/s4. Efficient and precise operation, delicate touch, help you fine composition5. Turn on the power to quickly connect to the aircraft, immediately enter the shooting state, and record wonderful moments at any time6. Can play 4K/120fps H.264 and 4K/120fps H.265 videos7. Equipped with mini-HDMI, full-function USB-C interface and microSD card slot8. Supports installation of third-party APP and live broadcast function, making editing and sharing more diverse9. Image transmission distance: 15 kilometers10. Delay time: 120 milliseconds11. Display: 5.5 inch, 1080P12. ​​Built-in battery: 5000mAh lithium battery13. Battery life: 3 hours14. Applicable models: For DJI Mavic 3 Pro, For DJI Mavic 3 Pro Cine, For DJI Mavic 3 Classic, For DJI Mavic 3, For DJI Mavic 3 Cine, For DJI Mini 3 Pro, For DJI Air 2SPacking list:-Remote control x 1-USB 3.0 Type-C cable x 1

Read more less

1. A stylish backpack that holds and displays the contents2. The transparent case is designed to house and display aircraft, as well as a two-way charging butler and remote control3. Compatible products: for DJI Mini 2, for DJI Mini SE, for Mavic Mini, for Osmo Mobile series, for Osmo Pocket series, for Osmo Action series4. Material: polyester + PVC5. Size: 170x180x105mm6. Weight: about 376 grams

Read more less

1. For DJI Mavic 3 Classic2. Precision optics designed to increase the FOV of a wide-angle camera to 108 degrees3. 15.5 mm equivalent focal length for a wider angle of view4. Weight (individual): 12.6 gramsPacking list:Widening lens x 1

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. The buoyancy rod can provide buoyancy for the drone, and can easily take off and land on the water surface2. Increase the buoyancy rod of the tripod to effectively increase the height by 60mm to avoid damage to the fuselage and gimbal in an uneven ground environment3. The weight of the tripod + buoyancy rod is only 32 grams, which will hardly increase the flight burden4. It is fixed with a nylon cable tie buckle, easy to disassemble and reusable5. Install the buoyancy stick only to take off and land on the calm water surface, not on the water surface with waves, otherwise there will be a danger of overturning6. Product size: 24 x 5 x 8 cm7. Product weight: 32 grams8. Note: Due to the large volume of the floating tripod, it will increase the overall wind area of the aircraft after installation, so it is not suitable for flying at high altitudes or in windy environments!Packing list:-Tripod x 2-Buoyancy Rod x 2-Wire tie x 8

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Support almost all smartphones (for iPhone 4)2. Support 7.9 inch, 9.7 inch, 10.5 inch tablet PC3. 360 degree rotation, does not affect the use of the lanyard4. Adjustable length, 115mm-186mm adjustable5. Will not block the USB port, will not block the screen of the controller, will not block the data port of the smartphone6. Foldable, easy to carry and store7. Material: plastic8. Suitable for DJI Spark / DJI Mavic Pro / Air remote controlNote: The product is only the bracket, no others are included

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Air 25. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: plastic8. Weight: 5g

Read more less

1. The real machine mould, precise matching2. Installation is simple and easy to use3. The environmental protection material, using at ease4. For DJI Mavic 35. Repair accessories for replacement of accidental damage6. Long Life and easy installation7. Material: metal8. Weight: 20g

Read more less

About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. With multiple output modes, it has a battery charging port, USB-A port, which can charge the battery and remote control at the same time, and can also serve as a power source for other external devices.2. Total charging output power up to 38W3. Multiple output ports and output modes4. Input: 100-240 V; 50-60 Hz5. Output: 13.2+/-0.1 V or 12.6+/-0.1 V6. USB interface: 5 V, 2 A7. Battery charge time: approx. 1 hour and 35 minutes (varies slightly depending on ambient temperature)8. Remote control charging time: approx. 4 hours (varies slightly depending on ambient temperature)9. Compatible products: for Mavic Air 2/2S

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use it

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use it

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less