3D Printer Machines

1. Modeling technology: FDM（fused deposition modeling）2. Printing Speed: maximum 100 mm/s3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: up to 260 celsius6. Heat bed temperature: up to 100 celsius7. Build surface: spring steel PC magnetic build plate8. Extrusion force: 80N9. Leveling mode: auto-leveling with CR-touch10. 4.3-inch color touch screen11. 32-bit silent motherboard12. Supported filament: PLA/ABS/TPU/PETG13. Nozzle diameter: 0.4 mm14. Print larger-size models, meet more printing needs15. Synchronized dual Z-axes, high precision printing16. Quick assembly, easy to handl

Read more less

1. Layer Height: 0.05-0.4mm2. Supported Filaments: PLA / TPU / PETG / ABS3. Leveling Mode: CR Touch Auto-leveling4. Mainboard: 32-bit Silent Mainboard5. Rated Power: 350W / 24V6. Printing Speed: 150 mm / s7. Silent Motherboard, Decibel≤50dB8. Resumed Printing, Save Time and Filament9. Take out the Model in an Easier Way10. New UI Interaction with LCD Knob Screen11. 4.3-inch HD Color Screen

Read more less

1. Modeling technology: FDM（fused deposition modeling）2. Printing speed: 150mm/s at the maximum3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: Up to 300 celsius6. Extrusion force: 80N7. Leveling mode: CR touch automatic leveling8. 4.3-inch color touch screen9. 32-bit silent motherboard10. Supported filament: PLA, ABS, PVA, Wood, TPU90-95, PETG, PA11. 96% pre-installed six-step assembly

Read more less

1. Layer Height: 0.05-0.4mm2. Supported Filaments: PLA / TPU / PETG / ABS3. Leveling Mode: CR Touch Auto-leveling4. Mainboard: 32-bit Silent Mainboard5. Rated Power: 350W / 24V6. Printing Speed: 150 mm / s7. Silent Motherboard, Decibel≤50dB8. Resumed Printing, Save Time and Filament9. Take out the Model in an Easier Way10. New UI Interaction with LCD Knob Screen11. 4.3-inch HD Color Screen

Read more less

1. Modeling technology: FDM（fused deposition modeling）2. Printing speed: 150mm/s at the maximum3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: Up to 300 celsius6. Extrusion force: 80N7. Leveling mode: CR touch automatic leveling8. 4.3-inch color touch screen9. 32-bit silent motherboard10. Supported filament: PLA, ABS, PVA, Wood, TPU90-95, PETG, PA11. 96% pre-installed six-step assembly

Read more less

1. Modeling technology: FDM（fused deposition modeling）2. Printing Speed: maximum 100 mm/s3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: up to 260 celsius6. Heat bed temperature: up to 100 celsius7. Build surface: spring steel PC magnetic build plate8. Extrusion force: 80N9. Leveling mode: auto-leveling with CR-touch10. 4.3-inch color touch screen11. 32-bit silent motherboard12. Supported filament: PLA/ABS/TPU/PETG13. Nozzle diameter: 0.4 mm14. Print larger-size models, meet more printing needs15. Synchronized dual Z-axes, high precision printing16. Quick assembly, easy to handl

Read more less

1. Layer Height: 0.05-0.4mm2. Supported Filaments: PLA / TPU / PETG / ABS3. Leveling Mode: CR Touch Auto-leveling4. Mainboard: 32-bit Silent Mainboard5. Rated Power: 350W / 24V6. Printing Speed: 150 mm / s7. Silent Motherboard, Decibel≤50dB8. Resumed Printing, Save Time and Filament9. Take out the Model in an Easier Way10. New UI Interaction with LCD Knob Screen11. 4.3-inch HD Color Screen

Read more less

1. Modeling technology: FDM（fused deposition modeling）2. Printing speed: 150mm/s at the maximum3. Layer height: 0.1-0.4 mm4. Filament diameter: 1.75 mm5. Nozzle temperature: Up to 300 celsius6. Extrusion force: 80N7. Leveling mode: CR touch automatic leveling8. 4.3-inch color touch screen9. 32-bit silent motherboard10. Supported filament: PLA, ABS, PVA, Wood, TPU90-95, PETG, PA11. 96% pre-installed six-step assembly

Read more less

1. Features: made of aluminum alloy, durable and easy to use2. Purpose: T8 lead screw nut shell bracket for 3D printing3. Material: aluminum alloy4. Size: about 3 x 3.4 x 2.4cm5. Weight: about 75g

Read more less

1. Voltage: 12/24V2. Power: 50W3. Material: aluminum, stainless steel, brass4. Installation method: external thread connection5. Scope of application: 3D printer6. Throat: full metal7. Nozzle size: 0.4mm8. Aluminum block size: 20 x 20 x 10mm9. Thermistor and heater cable length: about 1m

Read more less

1. Voltage: 12/24V2. Power: 50W3. Material: aluminum, stainless steel, brass4. Installation method: external thread connection5. Scope of application: 3D printer6. Throat: full metal7. Nozzle size: 0.4mm8. Aluminum block size: 20 x 20 x 10mm9. Thermistor and heater cable length: about 1m

Read more less

1. There are provisions for Cartesian robots and extruders2. Expansion to accessories such as controls3. MOSFET for heater/fan output and 3 thermistor circuits4. Incorporates 5A for additional safety and component protection5. Additional 11A fuse for heated bed control6. Fits 5 Pololu stepper driver boards7. Pololu board pin header sockets, easy to replace or remove for future designs8. I2C and SPI pins are left for future expansion9. The MOSFET is hooked up into a PWM pin for generality10. Servo connectors are used to connect to end stops, motors and LEDs. These connectors are gold plated, rated for 3A and are very compact

Read more less

1. There are provisions for Cartesian robots and extruders2. Expansion to accessories such as controls3. MOSFET for heater/fan output and 3 thermistor circuits4. Incorporates 5A for additional safety and component protection5. Additional 11A fuse for heated bed control6. Fits 5 Pololu stepper driver boards7. Pololu board pin header sockets, easy to replace or remove for future designs8. I2C and SPI pins are left for future expansion9. Size: about 6.66 x 3.2cm10. Weight: about 72g

Read more less

1. Features: made of aluminum alloy, durable and easy to use2. Purpose: T8 lead screw nut shell bracket for 3D printing3. Material: aluminum alloy4. Size: about 3 x 3.4 x 2.4cm5. Weight: about 75g

Read more less

Features1. Spider High Temperature and High Flow Hotend Pro - High temperature and high flow printing, higher temperature resistant and faster speed. - High flow printing - Temperature up to 300 degree C - No modification required - Fast heat dissipation 2. Large Melting Zone, High-flow Printing - The overall melting zone is increased by 30% - (The melting zone length is 27.3mm), smooth printing even with 0.8mm nozzle 3. Support high-speed printing - The high-temperature heat-resistant insulation sheet is added to maintain the temperature ofthe melting zone - Supporting 300mm/s high-speed printing. - The titanium alloy screws were used to reduce the thermal conductivity by 30%,which can reduce the transfer of heat from the heating zone to the heat dissipation zone and ensure the smooth feeding 4. All-metal Design High Temperature Resistance Up to 300 degree C - All-metal design for better overall performance, support 300 degree C printing and compatible with various filaments such as PLA, ABS, PETG, TPU PP, PC, nylon, PEEK, PEl, etc. 5. Standardized Interface, No Modification Required - Small and exquisite external sizewith modular arc interface design,ready to use without modification. Easy installation and maintenance, compatible with most printers on the market 6. Strength Upgrade, Longer lifespan - The heat break and heat sink are perfect fit to avoid pressure between themand the strength is upgraded to extend the life of the hotend. 7. Structural Upgrade, Faster Heat Dissipation - The heat dissipation part adopts a split design to reduce heat transfer. - Red copper heat sink to improve heat dissipation efficiency 8. Material Upgrade for Better Printing - The heat break is made of titanium and copper allovswhich perfectly fit with each other,and 0.2mm thin wall thickness for excellent thermal insulation. - The heat block and nozzle are made of copper alloy, and roughness of Ra0.3 on the inner wall of the nozzle to improve print quality. 9. Compatible models: - For Ender-3 Pro / Ender-3 / Ender-3 V2 / Ender-5 / Ender-5 Pro / Ender-5 Plus Ender-3s / Ender-6 / Ender-4 / Ender-3 Max / Ender-2 Pro / Ender-2 / CR-10S CR-10 / CR-10 S5 / CR-10 S4 / CR-10 Mini / CR-20 / CR-20 Pro series printer.Specifications1. Nozzle: 0.4mm, 0.8mm x 7 2. Size: 66x22x23mm 3. N.W.: 61g 4. Color: Red 5. Compatible with Filament: PLA, ABS, PETG,TPU, PP,PC,PA,PEI,etc. 6. Support Filament Diameter: 01.75+/-0.05mm 7. Retraction distance: Up to 5mm(lt can beadjusted according to the printing situation) 8. Overall temperature resistance: 450 degree c (excluding silicone sleeve) 9. The inner diameter of the throat tube: 1.9mm 10. Nozzle, throat tube Ra: Ra less than or equal to 0.25 11. Applicable models: For Creality CR-10 / CR-10S / Ender-2 / Ender-3/ Ender-5 series printer.Package List1. Adapter x 1 pcs 2. Copper tube x 1 pcs 3. Thermistor x 1 pcs 4. Thermal grease x 1 pcs 5. Hexagonal wrench x 3 pcs 6. M3X20 screw x 2 pcs 7. M2 limit screw x 2 pcs

Read more less

1. Input voltage and current: 5V, 2A2. Adapter parameters: 100-240V, 50-60Hz3. Applicable consumables: 1.75mm ABS or PLA4. Fixed temperature: 210 degrees Celsius5. Temperature adjustment: non-adjustable6. Speed adjustment: three speeds selectable7. Nozzle material: ceramic8. Nozzle diameter: 0.7mm9. ABS shell, wear and tear resistant, no colour loss10. Curved body design, suitable for ages 5 years and above11. 6 heat dissipation holes in the nib to increase usage time12. One piece moulding, good heat dissipation, long life13. High quality thickened steel piece, impact resistant, more stable operation14. Surface polishing technology, reduce friction and more silent15. Dimensions: 185x29x43mm16. Weight: 0.056 kgSteps to use.Step 1: Connect the power supply (the pen enters preheat when the power light is on)Step 2: Wait for the power light to turn green when the print pen is ready for normal use, the warm up time is about 15 secondsStep 3: Prepare the consumables for cutting, click the feed button, put the consumables in when the motor turns, wait for about 5 seconds for the pen to dispense normallyAccessories.- 3D pen x 1- 3 colours x 10m PLA- USB charging cable x 1- Stencil paper x 3- Instruction booklet x 1- Pen holder x 1

Read more less

1. Input voltage and current: 5V, 2A2. Adapter parameters: 100-240V, 50-60Hz3. Applicable consumables: 1.75mm ABS or PLA4. Fixed temperature: 210 degrees Celsius5. Temperature adjustment: non-adjustable6. Speed adjustment: three speeds selectable7. Nozzle material: ceramic8. Nozzle diameter: 0.7mm9. ABS shell, wear and tear resistant, no colour loss10. Curved body design, suitable for ages 5 years and above11. 6 heat dissipation holes in the nib to increase usage time12. One piece moulding, good heat dissipation, long life13. High quality thickened steel piece, impact resistant, more stable operation14. Surface polishing technology, reduce friction and more silent15. Dimensions: 185x29x43mm16. Weight: 0.056 kgSteps to use.Step 1: Connect the power supply (the pen enters preheat when the power light is on)Step 2: Wait for the power light to turn green when the print pen is ready for normal use, the warm up time is about 15 secondsStep 3: Prepare the consumables for cutting, click the feed button, put the consumables in when the motor turns, wait for about 5 seconds for the pen to dispense normallyAccessories.- 3D pen x 1- 3 colours x 10m PLA- USB charging cable x 1- Stencil paper x 3- Instruction booklet x 1- Pen holder x 1

Read more less

1. Input voltage and current: 5V, 2A2. Adapter parameters: 100-240V, 50-60Hz3. Applicable consumables: 1.75mm ABS or PLA4. Fixed temperature: 210 degrees Celsius5. Temperature adjustment: non-adjustable6. Speed adjustment: three speeds selectable7. Nozzle material: ceramic8. Nozzle diameter: 0.7mm9. ABS shell, wear and tear resistant, no colour loss10. Curved body design, suitable for ages 5 years and above11. 6 heat dissipation holes in the nib to increase usage time12. One piece moulding, good heat dissipation, long life13. High quality thickened steel piece, impact resistant, more stable operation14. Surface polishing technology, reduce friction and more silent15. Dimensions: 185x29x43mm16. Weight: 0.056 kgSteps to use.Step 1: Connect the power supply (the pen enters preheat when the power light is on)Step 2: Wait for the power light to turn green when the print pen is ready for normal use, the warm up time is about 15 secondsStep 3: Prepare the consumables for cutting, click the feed button, put the consumables in when the motor turns, wait for about 5 seconds for the pen to dispense normallyAccessories.- 3D pen x 1- 3 colours x 10m PLA- USB charging cable x 1- Stencil paper x 3- Instruction booklet x 1- Pen holder x 1

Read more less

1. Input voltage and current: 5V, 2A2. Adapter parameters: 100-240V, 50-60Hz3. Applicable consumables: 1.75mm ABS or PLA4. Fixed temperature: 210 degrees Celsius5. Temperature adjustment: non-adjustable6. Speed adjustment: three speeds selectable7. Nozzle material: ceramic8. Nozzle diameter: 0.7mm9. ABS shell, wear and tear resistant, no colour loss10. Curved body design, suitable for ages 5 years and above11. 6 heat dissipation holes in the nib to increase usage time12. One piece moulding, good heat dissipation, long life13. High quality thickened steel piece, impact resistant, more stable operation14. Surface polishing technology, reduce friction and more silent15. Dimensions: 185x29x43mm16. Weight: 0.056 kgSteps to use.Step 1: Connect the power supply (the pen enters preheat when the power light is on)Step 2: Wait for the power light to turn green when the print pen is ready for normal use, the warm up time is about 15 secondsStep 3: Prepare the consumables for cutting, click the feed button, put the consumables in when the motor turns, wait for about 5 seconds for the pen to dispense normallyAccessories.- 3D pen x 1- 3 colours x 10m PLA- USB charging cable x 1- Stencil paper x 3- Instruction booklet x 1- Pen holder x 1

Read more less

1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven3. Rated current: 300mA4. Shell material: PC5. Voltage: 5V6. Current: 15mAShipping list:-1 x 20cm wire-1 x 1/1.5m wire-1 x Sensor-1 x Wound terminal-1 x XH2.542pin terminal-1 x XH2.543pin terminal-2 x M3 nuts/nails

Read more less

1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven3. Rated current: 300mA4. Shell material: PC5. Voltage: 5V6. Current: 15mAShipping list:-1 x 20cm wire-1 x 1/1.5m wire-1 x Sensor-1 x Wound terminal-1 x XH2.542pin terminal-1 x XH2.543pin terminal-2 x M3 nuts/nails

Read more less

1. HPD322 two-phase stepper motor driver is a cost-effective subdivision driver designed based on PI flow control algorithm. It has excellent performance, high speed and large torque output, low noise, low vibration and low heat.2. The operating current and subdivision can be selected through the dial switch. There are 16 subdivisions and 16 currents to choose from. It has overvoltage, undervoltage, phase current and total current overcurrent protection. Its input and output control signals are all photoelectric. isolation.3. Signal input: single-ended, pulse + direction and double pulse;4. Built-in micro-subdivision; the maximum power supply can reach DC36V; the current is easy to set, 16 levels are optional, the output current peak can reach 2.2A; the current is halved after 1S of inactivity5. Optically isolated differential signal input, the maximum input pulse frequency is 300KHz;6. The pulse, direction and enable terminals all have constant current input functions and can be directly connected to the input signal without adding an external series resistor for voltage reduction and current limiting protection.7. High reliability: using multi-layer boards and surface mount sealing, leaving sufficient margin for power devicesSuitable for 20, 28, 35, 39, 42 4, 6, 8-wire two-phase stepper motorsUsage environment1. Do not place it next to other heating equipment. Avoid places with dust, oil, corrosive gases, excessive humidity and strong vibration. Combustible gases and conductive dust are prohibited.2. Temperature: 0-50 degrees Celsius3. Humidity: 40-90%RH4. Vibration: 10-55 Hz/0.15mm5. Storage temperature: -20-65 degrees Celsius6. Weight: 180g?

Read more less

1. Step accuracy: +5% (full step, no load)2. Step angle: 1.8 degrees3. Temperature rise: 80 degrees Celsius Max4. Ambient temperature: -20--+50 degrees Celsius5. Insulation resistance: 100M Ω min. 500VDC6. Withstand voltage: 500VAC for 1 minute7. Radial clearance: 0.06 Max. (450g-load)8. Axial clearance: 0.08 max. (450g-load)9. Radial pressure MAX: 28N (20mm From the flange)10. Axial pressure MAX: 10N

Read more less

1. Product model: 42HS602. Holding torque: 0.7N.m3. Number of motor phases: 24. Rated voltage: 2.6V5. Step angle distance: 1.8 degrees6. Rated inductance: 2.8mH+/-20%7. Rated phase current: 1.7A8. Rated resistance: 1.5Ω+/-10%9. Permanent magnet silicon steel sheet, pure copper coil, exquisite workmanship10. Stable operation, suitable for a variety of automation equipment and instruments

Read more less

1. High purity raw materials, high precision stability control, stable temperature and melting point2. High purity of lactic acid, good fluidity, low melting point3. High precision, diameter tolerance control at about 0.02mm4. Non-toxic and harmless, safe and environmental protection5. Material: PCL6. Printing precision: 0.02MRRL7. Print size: 1.75mm8. Length: about 5m/color

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: food grade silicone2. The groove width of the silicone pad is 1.5mm, which is universal for various 3D pen print heads. The extrusion of the mold pad is compatible with various 3D filaments and 3D pen nozzles.3. Easy to pop out, will not stick to the printing filament, just bend the flexible 3D pen drawing pad, and the dry 3D filament can be easily popped out4. High temperature resistance, can withstand high temperatures up to 230 degrees Celsius, which can prevent your table from being scorched during 3D creation5. The pen pad can be washed directly with water or washed in a dishwasher6. The silicone pad is used to etch multiple shapes of drawing graphics: rings, triangles, grids, rectangles, etc. You can use these basic shapes to form more different shapes and build three-dimensional graphics, making your 3D drawing more convenient and accurate7. Each set comes with 2 small heat-proof finger cots (for children). The finger cots can protect your fingers from hot wire and drawing.8. Size: 17.7x17.7x0.3cm, large size 41.2x20.3x2.5cm9. Weight: about 105 grams, about 198 grams for the extra large size

Read more less

1. Material: Tungsten steel 2. Weight: 100g 3. Type: Repair Tool Series 4. Number of sets: 10 5. Item No.: MHz-10

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Model Number:V5 V6 Nozzle for E3DScrew thread:M6 thread1. Material Brass2. Mounting type External thread connection3. Working temperature 2804. Working pressure 2805. Medium nozzle6. Scope 3D printer7. Specifications: 7 X 12mm

Read more less

Brand Name:MayitrModel Number:Pillow Block BearingTorque Capacity:OtherMaterial:Zinc Alloy1. Product Name: bearing with seat2. Model: KFL-08 000 001 bearing housing3. Use: 3D printer accessories4. Specifications: KFL08 (inner diameter 8), KFL000 (inner diameter 10)), KFL001 (inner diameter 12)5. Alias: horizontal trapezoidal screw bracket6. Packing: foam bag7. Material: zinc alloy

Read more less

1. No need to wait for one imaging, bright colors, long-term preservation 2. Small size, easy to carry 3. Adhesive design, easy to open, paste firmly 4. Photo paper can be cut freely and is easy to use. 5. Size: 50x76mm

Read more less

1. Support rod kit for 3D printer with aluminum profile structure. 2. Used to enhance the stability of the Z axis and improve the printing effect. 3. Compatible with Creality Ender-3 / Ender-3S / Ender-3 Pro / Ender-3 v2 or other similar structure 3d printers, the print size is 220x220x250mm. 4. The length of a single tie rod is 36.5cm, which is convenient to install and has a more stable structure. 5. Made of high-quality aluminum alloy material, strong and durable. 6. Product size: 56x63x471mm

Read more less

1. With special power chip, support 24V power input 2. The circuit board is optimized by circuit, effectively solve the heating problem 3. Can work with E/Z/Y/X a-xis motor 4. With USB interface, easy to operate 5. For Ender-3 /3 Pro / 3V2 / 5 / 5 Pro Note: Ender-3 / Ender-3 Pro use the same main board but different firmware

Read more less

1. Material: aluminum, stainless steel and brass 2. Installation type: external thread connection 3. Nozzle size: 0.4mm 4. Length of throat: 30mm 5. Filament: 1.75 mm 6. The white wire is the temperature thermistor, the red wire is the heating tube 24V 40W 7. Nozzle tip, aluminum heating block, throat (built-in Teflon) 8. Aluminum block size: 20x20x10mm

Read more less

1. Durable and high temperature resistant. 2. The high-speed fan has good ventilation and heat dissipation effect. 3. Seamless nozzle and pipe connection, no leakage, no blockage. 4. Material: PC 5. Output voltage: 24V 6. Size: 52x63x72mm

Read more less

1. High hardness, durable and easy to clean 2. High viscosity, strong adsorption and no edge warping 3. Easy to remove the model manually, or easily remove the model with the help of the scraper of a large model 4. Flat, fast and uniform heating 5. The special coating is an inorganic coating with a hardness of 8 Mohs and can work at a temperature of 400 degrees Celsius. 6. Size: 235x235x3mm 7. Material: tempered glass 8. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Flexible and detachable, firmly adsorb the magnet 2. The magnetic base can withstand a high temperature of 140?°C without losing its magnetism 3. Fast heater performance, reducing waiting time after printing 4. PEI powder coating, high temperature resistant and not easy to deform 5. Easy to use, bend the printing plate slightly, then remove the print after cooling 6. Size: 235x235mm 7. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less