DJI Mavic Series

1. Simple and not cumbersome, easy to connect 2. Use thicken metal plug to avoid oxidation and rust 3. Using tinned copper wire core, PVC wrap, shielding layer, improve efficiency 4. Connect directly to your phone for easy viewing of live images, convenient 5. Cable length: about 10cm

Read more less

1. The lightweight 360 Degree Propeller Guard fully surrounds the propellers to avoid injury or damage and improve flight safety. It is especially useful for beginners flying indoors or in places with numerous obstacles.Specifications:1. Weight (one side): 42 grams2. Radius: 97mm3. Dimensions (after installation): 411.6×335×115 mm (L×W×H)4. Compatibility:DJI Mini 4 ProTips:1. Before installing the propeller guard on DJI Mini 4 Pro, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.2. DJI Mini 4 Pro does not support obstacle avoidance after installing the propeller guard and cannot actively detour or brake when it senses an obstacle. When using intelligent features, the aircraft will not have obstacle avoidance capability.3. The aircraft will weigh more than 250 g after installing the propeller guard. Always carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flying.4. Do not use the Intelligent Flight Battery Plus after installing the propeller guard. Otherwise, the weight will overload the drone’s capacity, and flight safety cannot be guaranteed.

Read more less

1. Light and strong tension. 2. Easy to mount, secure, durable, and well-balanced propellers. 3. Light weight with good performance, and durable. 4. Quick release design, simple installation, strong and durable. 5. Quick release propellers for DJI Mavic 2 Pro / Zoom drone. 6. Note: Only two pairs propellers, not include drone. 7. Material: plastic.

Read more less

1. Quick release propellers for DJI Mavic Air Drone. 2. Easy to mount, secure, durable, and well-balanced propellers. 3. Light weight with good performance, and durable. 4. Quick release design, not folding propellers.

Read more less

1. Light and strong tension. 2. Easy to mount, secure, durable, and well-balanced propellers. 3. Light weight with good performance, and durable. 4. Quick release design, simple installation, strong and durable. 5. Quick release propellers for DJI Mavic 2 Pro / Zoom drone. 6. Note: Only two pairs propellers, not include drone. 7. Material: plastic.

Read more less

1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories2. The internal is made by pearl cotton, protect your drone well3. Can be hand-held, with anti-slip design handle4. The upper cover mesh bag can store small accessories as well as mobile phones, easy to carry out5. Shock absorption performance, effectively protect your equipment from normal scratches, dirt, tears and wear6. Size: 21.5 x 29.5 x 10cm7. Weight: 368g

Read more less

1. With multiple output modes, it has a battery charging port, USB-A port, which can charge the battery and remote control at the same time, and can also serve as a power source for other external devices.2. Total charging output power up to 38W3. Multiple output ports and output modes4. Input: 100-240 V; 50-60 Hz5. Output: 13.2+/-0.1 V or 12.6+/-0.1 V6. USB interface: 5 V, 2 A7. Battery charge time: approx. 1 hour and 35 minutes (varies slightly depending on ambient temperature)8. Remote control charging time: approx. 4 hours (varies slightly depending on ambient temperature)9. Compatible products: for Mavic Air 2/2S

Read more less

1. Specially designed for DJI Mavic 3 Pro / 3 / 3 Classic, precise fit, more secure and stable without shaking;2. Simple and convenient installation and operation, one-click delivery;3. It has its own down-view light, which can be accurately placed at night to ensure the safe flight of the aircraft;4. At the same time, it can be equipped with fill light and a variety of sports cameras to achieve more gameplay.5. Material: ABS6. Battery capacity: 100mAh7. Size: 10 x 9.3 x 10.7cmPacking list:1. Dispenser body x 12. Body bracket x 13. 1/4 double head screw x 14. M3 screw x 15. M5 screw x 16. Action Camera Adapter x 17. Silicone gasket x 28. Manual x 19. Type-C data cable x 110. 1.5m Fishing Line x 1

Read more less

1. Suitable for DJI Mavic Pro Platinum 2. Aerodynamic design, reduces noise and extends flying time 3. Quantity: 2 pairs (CWx2, CCWx2) 4. It can also suitable for DJI Mavic Pro, but noise reduction and flying time extension performances are not so good 5. Note: drone and other accessories are not included, for reference only

Read more less

1. Data cable for DJI SPARK/ MAVIC PRO 2. Directly connect to smartphones / tablets 3. Net weight: 7g 4. Cable length: about 30cm

Read more less

1. Specially designed for the Mavic 3 Pro series, it can accommodate the flying kit and master kit, such as: aircraft + RC PRO remote control + RC remote control + 4 pieces of flight batteries + charger + filter + charging butler + propellers + data line etc. 2. ABS material, hard shell design, wear-resistant and drop-resistant 3. Highly tight and waterproof, can withstand repeated watering tests 4. High-density sponge, good softness, easy to store accessories 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure 6. Size: 41.8 x 34.5 x 18.6cm

Read more less

Features1. Special for DJI Mavic 3 drones, it fits the body just right, harmonious and beautiful 2. Support a variety of installation methods, which can be installed on the top or on the bottom, equipped with 1/4 screws and adapters, can be equipped with fill lights, equipment with 1/4 screw holes, sports cameras, etc. 3. Using high-strength ABS material, wear-resistant and durable, not easy to damage 4. Light weight, does not affect the sensor and battery switch on the drone 5. Size: 10 x 8.86 x 2.98cmPackage List1. Camera mount x 1 2. 1/4 inch double head screw x 1 3. Tripod adapter x 1 4. M3 plastic head screw x 1 5. M5 screw x 1 6. Silicone gasket x 2 7. Manual x 1

Read more less

1. Made by 3D printing, the joystick of the drone can be fixed at an angle through the knob, so that the drone can be fixed at a fixed speed to facilitate shooting time-lapse works.2. Material: plastic3. Net weight 11g4. Product size 3 x 2 x 1.2cm5. Note: only 2 fixed speed brackets are included, no other

Read more less

1. High temperature resistance, radiation protection, explosion-proof, safe storage of batteries, rest assured shooting2. Adhesive sealing design, easy and fast to use3. Exquisite edging, reliable workmanship4. For DJI Mini 3 Pro5. Weight: 27g/42g/56g6. Dimensions: 90 x 72 x 38mm/95 x 86 x 63mm/120 x 95 x 63mm

Read more less

1. After the product is used, the blades of the fuselage can be fixed to prevent tampering in the bag2. Small, portable and lightweight3. Material: plastic4. Net weight: 5 grams5. Product size: 4 x 2 x 1.5cm

Read more less

1. Specially designed for the DJI RS 3 mini series, precise mold opening, can accommodate the main body of the gimbal + tripod + quick release plate + other small accessories 2. PU diamond-shaped fabric, the inner support is Lycra, the appearance is exquisite, and the taste is upgraded 3. Two-way zipper, smooth and not stuck 4. Nylon webbing is used, which is easy to adjust the length, light and wear-resistant 5. Size: 27.5x25x7.8cm 6. Weight: 538.5g

Read more less

1. Fully enclosed design, anti-scratch and anti-scratch safety upgrade2. Prevent oxidation short circuit, prevent the battery from being exposed to moisture and oxidation for a long time3. Dustproof and waterproof, prevent foreign objects, prevent conductive particles from entering the battery and cause short circuit4. Soft silicone, will not scratch the contacts, closely fit with the interface5. Intimate finger design, easy to install and remove6. It can be used as a battery base, so that the battery can stand upright on the desktop7. Tear-resistant and not deformed, durable8. Applicable models: suitable for Mini 3 Pro9. Material: Silicone10. Specifications: 3 packs11. Dimensions: 46 x 28 x 16mm12. Weight: about 9g/pcs13. Note: The product contains only the protective cover, nothing else

Read more less

DJI Cellular Module:1. You can connect your equipment to 4G network for networking, enhanced map transmission, network RTK and many other functions. This module provides you with high-speed and stable networking services and supports most 4G bands worldwide2. This product does not include a SIM card3. When using the enhanced map transmission, please make sure to operate the drone in a place where the remote control or cell phone 4G signal is near full.4. Compatible products: for DJI Mavic 3 Classic/DJI Mavic 3/DJI Mavic 3 Cine/DJI RC Pro/DJI Mavic 3 Module installation kit:1. Use with DJI Cellular module to securely mount on DJI Mini 3 Pro.2. When using with the DJI RC-N1 remote control, make sure the phone connected to the remote control is connected to the 4G network.3. When using with DJI RC, make sure DJI RC is connected to 4G network by connecting to Wi-Fi hotspot of cell phone.4. Applicable products: For DJI Mini 3 Pro

Read more less

1. Suitable for DJI Mavic 2 Pro/Zoom drones2. Can be remotely dispatched, used for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc.3. USB charging, quick release, one-touch control by remote control.4. Lightweight and safe, neither adding to the burden of the drone nor damaging the drone, easy to install and remove.5. Bottom mounting kickstand, does not affect the propeller and sensors!Other parameters:1. Main material: ABS2. Built-in battery capacity of 150 mAh3. Charging interface: Micro-USB4. Charging time: 90 minutes5. Life span: charging once can be opened about 300 times6. Net weight: 85g7. Load weight: 500g (MAX)8. Product size: 10 x 5.5 x 8.5cmPacking list:Thrower x 1Booster stand x 4Rubber band x 2Bandage x 2Connection cable x 1Thrower charging cable x 1Packaging: boxed

Read more less

1. Compact shape, lower noise, after precision dynamic balance test, higher stiffness, for the aircraft to provide more powerful tensile force2. Stiffer and more powerful for the aircraft3. Packing list: Propeller X 2 pairs + screws x 124. Suitable for DJI Mini 2 / DJI Mini SE5. Size: 119.38 x 66.04 mm6. Weight: 0.6 g7. Tip:- please follow the instructions on the paddle bag to install the paddle on the correct arm;- use the same blades in the same package when replacing the blades. Do not mix the blades with those in other packages.

Read more less

1. Made of high quality material, good toughness2. Separate the propeller from the outside to prevent the propeller from accidentally hurting people and things, and at the same time prevent foreign objects from hitting the propeller to improve flight safety3. Exquisite design, can be disassembled quickly4. Radius: 157mm5. Dimensions after installation: 634 × 549 × 108.5mm6. Weight: 58g/side7. Applicable models: DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine8. Packing list: propeller cover x 1 set(4 pieces)

Read more less

1. Low noise, high thrust-to-weight ratio and accurate dynamic balance test provide strong pull force for the aircraft2. Diameter x pitch: 6.0 x 3.0 inches3. Suitable for DJI Mini 3 Pro4. Packing list: Propeller x 2 pair + screws x 125. Weight: 0.9 g6. Tip:- please follow the instructions on the paddle bag to install the paddle on the correct arm- use the same blades in the same package when replacing the blades. Do not mix the blades with those in other packages

Read more less

1. Specially designed for DJI Mini 3 Pro, precise mold opening, small size and large capacity, can accommodate remote control with screen + charger + 2 batteries + aircraft + other small accessories (accessories not included) 2. High-quality PU leather fabric, beautiful appearance and upgraded taste 3. Two-way zipper, smooth and not stuck 4. The unique handle is easy to carry and can also be directly stored in the backpack 5. Using nylon fabric webbing, easy to adjust the length, light and wear-resistant 6. By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance 7. Dimensions: 30 x 23.5 x 8.2cm 8. Weight:556.5g

Read more less

1. Portable size, large capacity, and accessories can basically be placed2. Lycra + EVA hot-pressed inner support, real machine mold opening, smooth and does not hurt the fuselage3. Comfortable hand-feeling leather ball pattern PU, beautiful and beautiful water-repellent fabric, not afraid of traveling in light rainy days4. Thick and bold hanging buckle, no rust or paint, strong and durable5. The plated metal slider is beautiful and elegant, and the double slider design is convenient to use6. Applicable models: suitable for DJI MINI 3/MINI 3 PRO (two remote control versions are optional)7. Material: Shell PU+EVA, Liner Lycra+EVA8. Dimensions: about 26.7 x 26.7 x 10.2cm9. Weight: about 675g10. Storage bag only, excluding display items

Read more less

1. CNC technology, all-metal aluminum alloy material: the overall parts are made of aluminum alloy material, with high strength, high hardness and firm structure, not easy to loose, durable and more secure2. Shooting while riding, free control: When taking pictures outdoors, you can fix the remote control through the bicycle bracket and control the remote control while riding3. Reverse lock adjustment piece, human body gesture wrench, silicone non-slip pad4. Universal adjustment of the pea clip: the multi-angle of the pea clip is flexible and changeable, and can be adjusted according to your needs5. Compatible with horizontal/slash bars: the body pea clip is universally adjustable, and the angle is flexible, not only suitable for bicycle horizontal bars, but also for slash bars6. The remote control connector is free from disassembly design. After use, just remove the bicycle bracket, and the remote control connector can be removed7. Outdoor follow-up shooting, intelligent follow-up: Fix the remote controller with screen through the bicycle bracket to realize shooting while riding outdoors8. Note: The product only includes the bracket, no other items are included9. Applicable models: suitable for DJI Mini 3 Pro10. Material: aluminum alloy11. Size: 13.2x15.1x4cm12. Net weight: 145.3g13. Gross weight: 164.5gInstallation steps:1. Tighten the remote control connector on the bicycle bracket by rotating clockwise2. Use a screwdriver to turn the screw to secure the bike to the remote3. Remove the knob and clamping block in turn4. Install and fix the clamping block first5. After tightening the knob6. The installation is complete

Read more less

1. Lightweight design will not bring excessive load to the aircraft2. Quick installation, convenient and practical, the frame is light and stable. The overall weight is only 25.5g, which can stably carry the body and be easily carried by the body without affecting battery life.3. Safer landing for Mavic 3 Pro aircraft4. Reduce the impact when landing and protect the gimbal camera5. Material: ABS6. Dimensions: 5.5 x 5.2 x 2.9cm (front stand); 7.7 x 5.6 x 1.95cm (rear stand)Packing list:1. Front left foot stand x 12. Left rear tripod x 13. Right front tripod x 14. Right rear tripod x 1

Read more less

1. Specially designed for DJI Air 3, it fits the surface of the Air 3 body very well.2. It can fix and protect the propeller to prevent rollover and damage during storage, making storage and transportation safer.3. Made of high-quality ABS+silica gel, available in orange, gray, and black colors, strong toughness, high-strength molding, durable, and will not damage the Air 3 body and propellers.4. The snap-on design is convenient for installation and disassembly, two gears are optional, and you can choose according to your personal needs, without squeezing the drone body and blades.5. Lightweight design, small size, light weight, easy to carry, easy to store, and does not take up space.

Read more less

1. Propellers specially made for DJI Mini 3 produce less noise and have undergone precise dynamic balancing tests to enhance aerodynamic efficiency and powerful thrust.2. Tips：Follow the instructions and attach propellers to the correct frame arms.When changing propellers, use the propellers in the same package. Do not mix propellers from different packages.Specifications:1. Diameter × Thread Pitch: 6.0 × 3.0 inches2. Weight (each): 0.9 grams3. Compatibility: DJI Mini 3In The Box:Propellers (pair) × 2Screws × 12

Read more less

1. A variety of exquisite and cool patterns are available.2. Outdoor ink, long-lasting and beautiful, not easy to fade.3. Imported removable stickers, no glue left after repeated application.4. There is an air guide groove on the back, which makes it easier to deal with air bubbles and makes it easier to fit.5. Note: The product only has stickers and does not contain other items

Read more less

1. Can store the drone body, remote control and 3 batteries (1 of them is on the drone body)2. Resistant to external pressure, using EVA material, pressure-resistant, anti-slip and wear-resistant3. Double zipper design, easy to use, smooth and not jammed.4. Wider carrying strap design, sturdy and solid5. Suitable for DJI Mini 3 / Mini 3 Pro6. Material: EVA7. Weight: about 260g8. Size: about 24 x 19 x 9cm9. Note: drone and other accessories in the picture are for display only, shipping does not include

Read more less

1. Suitable for a variety of drones: any drone that can carry a load of more than 100g can be carried2. 2.4G remote control, one-click placement, simple operation3. Scientific and lightweight design, does not affect flight speed4. Built-in 350 mAh/3.7V battery, USB charging port5. Installation with hook and loop fastener straps does not damage the fuselage and is convenient and quick6. Loading weight: up to 750g7. Usage time: about 12 hours8. Charging time: about 90 minutes9. Product size: 55 x 54 x 26mm

Read more less

1. 37W high power input, intelligent temperature control charging algorithm, adjust charging power according to temperature, faster and safer2. LED lighting, 1-5 levels of brightness can be switched cyclically, and can be used in multiple scenes and for multiple purposes, meeting the needs of outdoor adventure and night flights. (Press and hold the light button for more than 2S to turn on the LED light. The default brightness mode is the second level. The fifth level is the strobe mode. Press and hold the light button for more than 2S to turn off the LED light.)3. SOS reminder: Using dynamic SOS intelligent algorithm, as the battery power decreases, the interval between calls for help is lengthened, ensuring longer calls for help.4. Intelligent detection of battery power, the battery will be charged in order from high to low power. (Only when charging the intelligent flight battery)5. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections6. LED indicator light to check battery power more accurately7. One-key storage function: Press and hold the function button for more than 2 seconds while charging to turn on the 60% storage mode. Convenient for travel, air transportation, and storage when not in use for a long time.8. Suitable for DJI Mini 4 Pro / Mini 3 series batteries, and supports PD fast charging protocol. The USB-A port can also quickly charge other digital devices.Parameter:1. Input (USB-C): 5V 3A/9V 3A/12V 3A2. Charging power: 37W (Max)3. Output (USB-A): 5V 2A, 10W (Max)4. Charging method: charge three batteries in sequence5. Compatible battery: Suitable for DJI Mini 3 series smart flight batteries, DJI Mini 4 Pro smart flight batteries, DJI Mini 4 Pro/Mini 3 series long-life smart flight batteries6. Adaptation charger: It is recommended to use 30W/65W PD protocol charger7. LED lighting function: supported8. Call for help reminder function: supported9. One-click storage mode: supported10. Battery display: supported11. Working environment temperature: 5-40 degrees Celsius12. Dimensions: 100 x 54 x 55mm

Read more less

1. Specially designed for small drones with cameras, suitable for DJI Mavic Pro/ Platinum / Mavic Air / Mavic 2 Pro/Zoom, DJI Air 2S, DJI Avata, DJI Mini 2/SE/MINI 3 Pro, Mavic Air 2. DJI Spark/Tello, Xiaomi FIMI drone, GoPro Karma, Parrot Anafi drone, etc.2. The unfolded size is 50cm/65cm and can be folded for easy portability.3. Made of waterproof PU leather material with anti-fouling function, making the landing pad easy to clean.4. High-precision printing, outdoor ink, waterproof and sun-proof, not easy to fade, double-sided and two-color design, suitable for a variety of environments, highlighting the take-off and landing positions5. Material: PU6. Weight: 50cm/450g, 65cm/739g

Read more less

1. Material: Shell EVA + nylon2. Suitable for DJI Mini 4 Pro (compatible with RC 2 and RC-N2 remote controls)3. Real machine mold opening, high adaptability4. Shoulder strap card slot design, can place bus cards and other items5. The metal buckle of the shoulder strap is durable and not easy to be damaged.6. Water-repellent fabric, wear-resistant material7. Durable and long service life8. Weight: about 650 grams9. Dimensions: 31 x 20.5 x 11.5 cm10. Note: only storage bag, no other items included

Read more less

1. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying.2. With the DJI 30W USB-C Charger, three Intelligent Flight Batteries can be fully charged in just three hours, and three Intelligent Flight Batteries Plus can be fully charged in just four hours.Specifications:1. Model: CHX162-302. Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargers3. Input: 5 V, 3 A/9 V, 3 A/12 V, 3 A4. Output (USB): 5 V, 2 A5. Operating Temperature Range: 5- 40 degrees celsius (41-104 Fahrenheit)6. Charging Time: Three Intelligent Flight Batteries can be fully charged in about three hours.Compatibility:DJI Mini 4 ProDJI Mini 3 ProDJI Mini 3Packing list:Two-way Charging Hub × 1

Read more less

1. Large capacity, huge capacity. It can store the head, double-layer quick-release plate, battery handle, portable adapter handle and tripod, as well as lens fixing bracket, data cable, screw set and other accessories.2. Professional waterproofing, the safety box is tightly closed and sealed, which can effectively prevent water leakage when splashing or sprinkling water.3. High strength, impact resistance, corrosion resistance and high and low temperature resistance. Made of super impact-resistant hard material, it is anti-fall, resistant to smashing, not easily deformed, and has strong load-bearing capacity.4. High-quality EVA shock-proof inner support, precise mold opening, tight storage and protection of your equipment.5. Comfortable soft rubber handle, comfortable in hand, non-slip and wear-resistant, relieving hand pressure.6. Product size: 35.4x29.4x13.7cm7. Net weight: 1.59kg

Read more less

1. Material: Plastic + metal2. Precise mold opening3. Applicable models:For DJI Air 2S/Mini 2/ Mavic Air 24. Built-in non-slip soft pad, effectively protect the handlebar from scratches5. Specially designed for Royal Air 2 remote control, tightly clamped and not easy to loosen6. Reserve the USB-C hole, you can charge the remote control without removing the bracket7. When riding and shooting in the wild, you can fix the remote control on the bicycle and control the remote control while riding.8. Net weight: 138g

Read more less

1. Material: Carbon fiber2. Features: Compact and easy to store3. Dimensions: 5.8 x 15 x 4 mm 4. Net weight: 4.7 g 5. Total weight: 29.9 g 6. Applicable models: For DJI Mavic MINI7. The product only includes propeller blades, not include drone

Read more less

Royal MAVIC AIR 2 remote control tablet stand:1. Material: Plastic2. Dimensions: 2.7 x 6.9 x 3.9 cm3. Applicable models: MAVIC AIR 24. Net weight: 5.6 g5. Total weight: 12.9 g6. Tablet support: only for the size of the tablet height within 135mm, within 7.9 inches of tablet useRoyal MAVIC AIR 2 remote control phone holder:1. Material: Plastic2. Dimensions: 2.7 x 2.9 x 3.9 cm3. Applicable models: MAVIC AIR 24. Net weight: 3.8 g5. Total weight: 8.2 g6. This product only includes brackets, not others7. Mobile phone holder: Suitable for mobile phones of any size

Read more less

1. Material: 3D printing2. Dimensions: 70 x 35 x 13 mm3. Applicable to: For AUTOEL EVO Ⅱ4. Net weight: 14 g5. Total weight: 21.3 g (including packaging)6. Control method: Remote control7. Applicable to 7.9 inch screen, not applicable to 9.7/10.2/10.5 inch screen8. Note: The product only includes flat extension clips, not others

Read more less

1. Two-way zipper design, very suitable for use at home or travel2. It is made of high-quality EVA and 1680D waterproof cloth by hot pressing, it is small in size, good in shock resistance and easy to carry3. The inside of the bag is composed of an inner bracket and an outer box, which provides better protection for high pressure4. There is also a small collection compartment and grid inside, so that users can conveniently store some small accessories in the bag5. The inner liner of precise mold opening is not easy to fall off, and it can get all-round care6. Wear-resistant, scratch-resistant, effectively protect your machine7. Material: nylon, EVA8. Size: 29x19.5x12.5cmNote: The product is only a storage bag and does not contain other items

Read more less

1. Large capacity design, can store your air 2 and most accessories (remote control, 3 batteries, charger, data cable, propeller, etc.)2. Made of pu material, high density, waterproof and compressive, effectively protect your machine3. Durable, waterproof and light, designed with comfortable handle and shoulder strap, easy to carry4. The inner tank for precise mold opening, neither loose nor tight5. Two-way zipper design, very suitable for use at home or travel6. Size: about 29x19.5x10cmNote: The product is only a storage bag and does not contain other items

Read more less

1. Material: CNC aviation aluminum alloy material2. Process: Anodizing and coloring process3. Weight: 4g/pair4. Knurled anti-slip design for stable holding5. Stored in the remote control like the original joystick6. Applicable models: Suitable for DJI Mavic Mini / DJI Mavic 2 / DJI Mavic Air

Read more less

1. Material: carbon fiber2. Net weight: 29 grams3. The shape is small, exquisite, lightweight and easy to fly4. Lower noise and longer battery life5. Applicable models: Suitable for DJI Maivc Pro Platinum & Maivc Pro

Read more less

1. Material: Silicone, brass2. Weight: About 26 grams/pair3. Size: About 8.5x2.5 cm4. Application: Suitable for DJI Mavic Min, Mavic 2, Mavic Air, Spark, remote control with screen, Phantom 4 Pro, FIMI X8SE 2020Features:1. Brass material, high strength and hardness, good electrical conductivity2. Flexible silicone, anti-tear, not easy to deform, durable3. Tight socket design, plug and play, stable and not easy to loosen4. Non-destructive quick installation, easy to use, compatible with a variety of remote controls5. Enhance the sensitivity to the front signal, make the antenna have strong directionality, and improve the antenna gain

Read more less

1. Quick release propellers for DJI Mavic Air Drone. 2. Easy to mount, secure, durable, and well-balanced propellers. 3. Light weight with good performance, and durable. 4. Quick release design, not folding propellers.

Read more less

1. Suitable for DJI Mavic Pro Platinum 2. Aerodynamic design, reduces noise and extends flying time 3. Quantity: 2 pairs (CWx2, CCWx2) 4. It can also suitable for DJI Mavic Pro, but noise reduction and flying time extension performances are not so good 5. Note: drone and other accessories are not included, for reference only

Read more less

1. The surface is made of 1680D+EVA composite material, semi-steel shell, waterproof and wear-resistant. 2. High quality double zipper design, can be stretched more than 100,000 times. 3. The inner is made of thicked and low taste EVA, which is more environmentally friendly and healthy. 4. The real machine mold, accurate internal design, and all the accessories can be easily stored in. 5. Intimate hand-held design and zippered top cover that make the product easy to use. 6. With a high-quality adjustable length single-shoulder strap, travel more varied, and free. 7. All parts and materials are carefully selected, good texture, take better experience. 8. Can storage your DJI MAVIC PRO Drone and accessories (DJI MAVIC PRO, Controller, Batteries, Charger, Propeller, Cable&Accessory Slot). 9. Size: 29cm x 21cm x 11cm, enough to storage your DJI MAVIC PRO Drone and all of the accessories. 10. Note: DJI MAVIC PRO drone and accessories are not included.

Read more less