Arduino & SCM Supplies

Features1. 320x240 resolution, IPS screen, 262K colors, clear and colorful displaying effect 2. Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions 3. MicroSD card slot for storing images and direct displaying them easily 4. Programmable backlight control, power saving 5. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 5V 2. Resolution: 320x240 pixels 3. Display color: 265K colorful 4. Communication interface: SPI 5. Display panel: IPS 6. Display size: 57.60 x 43.20 mm 7. Pixel size: 0.18x 0.18 mm 8. Driver: ST7789 9. Touch Controller: XPT2046 10. Size: 70.20 x 50.20 mmPackage List1. Pico-ResTouch-LCD-2.8 x1 2. Standoffs pack x1

Read more less

This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wirelessApplication environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.SpecificationReceiver module: 1. Product Model: XD-RF-5V2. Operating voltage: DC5V3. Quiescent Current: 4MA4. Receiving frequency: 433.92MHZ5. Receiver sensitivity: -105DB6. Size: 30x14x7mmTransmitter:Technical parameters1. Product Model: XD-FST4. Launch distance: 20-200 meters (different voltage, different results)3. Operating voltage: 3.5-12V4. Dimensions: 19 * 19mm8. Operating mode: AM6. Transfer rate: 4KB / S7. Transmitting power: 10mW8. Transmitting frequency: 433M9. Pinout from left to right: (DATA; VCC; GND)Package included1. 1 x Receiver module2. 1 x Transmitter

Read more less

1. This is a plant watering alarm - as simple as that. You put it into the soil near a plant and it emits a tiny chirp when the soil is dry, reminding you to water the plant. It uses capacitive humidity sensing as opposed to resistive humidity sensing, this means, it does not make an electric contact with the soil, avoiding electrode corrosion and soil electrolysis and resulting in better accuracy and longer battery life.2. Special care has been taken not to make it yet another source of annoyance - This sensor will be silent when it’s dark and will restrict itself from making too much noise.3. The alarm level can be set for each plant individually. As water is consumed by the plant, it will detect the low moisture level and will start to emit rare short chirps. As more water evaporates, it will increase the alarm rate. This sensor can detect if it’s day or night by measuring the amount of ambient light and will not make noise when it’s dark.4. Package included: 1 x Plant Watering Alarm Sensor

Read more less

Application:BatteryInput voltage:4.5V-5.5VFull charge voltage:4.2V1. Supply current: 1A2. Application area: Smart home3. Charging method: linear charging 1%4. Charging current: 1A adjustable5. Charging accuracy: 1.5%6. Charging indication: Red light charging green light full charge7. Input interface: Micro USB8. Operating temperature: -10 ° C to +85 ° C9. Can reverse connection: can not reverse10. Weight: 10g11. Peripheral size: 24*17*4mm

Read more less

Type:Voltage RegulatorModel Number:3S 25A 186501. Supply current: 25A2. Power supply voltage: 12v3. Power: Standard4. Number of pins: 05. Use: Instrument6. Package: 3 strings of 12v25a7. Rated voltage: 12.6v8. Size: 56*45*4.0mm

Read more less

Type:Voltage Regulator1. Package: Step-down module2. Power: Standard3. Size: 20*11*5 mm4. Input voltage: DC 4.5-24V5. Output voltage: integrated adjustable and fixed output, fixed output voltage on the back6. Adjustable range (0.8-17V), fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)7. Output current: maximum 3A (please pay attention to heat dissipation at full load), the actual test input 12V output within 1.5A without special treatment heat dissipation.8. Conversion efficiency: up to 97.5% (6.5 to 5V 0.7A)9. Switching frequency: 500KHz10. Output ripple: 20mV (12V to 5V3A) 20M bandwidth11. Wiring method: welding12. Input method: welding13. Output method: welding / pin header14. Welding hole spacing: 2.54 mm15. Output over voltage protection: none16. Full load temperature rise: 40 ° C17. Quiescent current: 0.85 mA18. Load adjustment rate: ±1%19. Voltage regulation rate: ±0.5%20. Dynamic response speed: 5% 200uS

Read more less

1. Operating voltage range: DC voltage 5-20V2. Static current: <65uA3. Level output: 3.3 V high / low 0V4. Trigger mode: L non-repeatable trigger / H repeat trigger (default repeat trigger)5. Delay time: 0.5-200S (adjustable) can be made in the range of a few seconds - tens of minutes6. Blocking time: 0.2S can be made in the range of a few seconds - tens of seconds7. Circuit board dimensions: 32mm*24mm8. Sensing range: <120 degree cone angle, in 7m9. Working temperature: -15-+70 degrees10. Induction lens size: diameter: 23mm

Read more less

How to charge the battery: 1. Determine the float voltage and charging current of the rechargeable battery, the input voltage of the module;2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined charging current value;4. The charge-to-light current is shipped by default at 0.1 times the charge current (constant current value).5. Adjust the constant voltage position device to make the output voltage reach the float voltage; connect the battery and try to charge.(1, 2, 3, 4, 5 steps are the module input power supply, the output is not connected to the battery.)LED constant current drive How to use:1. Determine the operating current and maximum operating voltage at which you need to drive the LEDs;2. Adjust the constant voltage positioner and adjust the output voltage to about 5V.3. Use the multimeter 10A current block to measure the output short-circuit current, and adjust the constant current potentiometer to make the output current reach the predetermined LED operating current;4. Adjust the constant voltage positioner to make the output voltage reach the maximum working voltage of the LED;5. Connect the LED and test the machine. (1, 2, 3, 4 steps are connected to the power supply of the module, and the output is not connected to the LED light.)Description of the communication protocol:1. This module has the function of communicating with the computer, which can facilitate the computer to read the module current and voltage data. 2. Since the output of this module is TTL level, it is necessary to realize communication with the computer, and also convert this level back to the RS232 which can be recognized by the computer. Level, you need to use this cp2102 usb to TTL module to achieve conversion.3. The communication protocol is as follows: Baud rate: 9600 Bps- BB CC ADDR 00 XX XX CRC (current return command)- BB CC ADDR 01 XX XX CRC (voltage return command)- Where BB CC is the frame header (2 bytes)- ADDR is the module address (1 byte)- 00 is the read current command (1 byte)- 01 is the read voltage command (1 byte)- XX XX any value (2 bytes)- CRC CRC check (1 byte)Instrument properties:1. Refresh rate: About 200ms once2. Display mode: Double four-digit 0.28'' digital tube3. Measurement Accuracy: 0.1%4. Current range: 0-5A, voltage range 5V-30V5. Working current: Less than 15mA6. Display color: Red7. Input impedance: 50 milliohms8. Storage temperature: -10 degrees Celsius to 50 degrees Celsius9. Product size: 51mm x 26.3 mm x 10mm

Read more less

1. Size: 38mm (length) X22mm (width) X14mm (height)2. Weight: 8g3. Working voltage: 3.3--5.5V4. Clock chip: High-precision clock chip DS32315. Clock accuracy: Within 0-40 degree C, accuracy 2ppm, annual error about 1 minute6. With 2 calendar alarm clocks7. Programmable square wave output8. Real-time clock generates seconds, minutes, hours, week, date, month and year time, and provides leap year compensation valid to 2100 years9. The temperature sensor inside the chip has an accuracy of +/- 3 degree C10. Memory chip: AT24C32 (storage capacity 32K)11. IIC bus interface, high transmission speed 400KHz (when working voltage is 5V)12. Can cascade other IIC devices, 24C32 address can be modified by short circuit A0 / A1 / A2, the default address is 0x5713. With rechargeable battery LIR2032 to ensure that the clock still runs normally after the system is powered off14. Packing: Single anti-static packaging15. Wiring instructions (taking Arduino uno r3 as an example):SCL -- A5SDA -- A4VCC -- 5VGND -- GND16. DS3231 is a low-cost, high-precision I2C real-time clock (RTC) with integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device contains a battery input, which can maintain accurate timing when the main power is disconnected. The integrated crystal oscillator improves the long-term accuracy of the device and reduces the number of components in the production line. The DS3231 offers commercial and industrial temperature ranges and is available in a 16-pin 300mil SO package.17. RTC saves seconds, minutes, hours, day, date, month and year information. Months less than 31 days will automatically adjust the end of the month, including corrections for leap years. The working format of the clock can be 24 hours or a 12-hour format with / AM / PM indication. Provide two configurable calendar alarms and a configurable square wave output. The address and data are transferred serially via the I2C bidirectional bus.Sophisticated, temperature-compensated voltage reference and comparator circuits are used to monitor VCC status, detect power failures, provide reset outputs, and automatically switch to backup power when necessary. In addition, the / RST monitor pin can be used as a manual input to generate a μP reset.18. In addition to high timing accuracy, the DS3231 also has some other functions that expand the additional functions and selection range of the system host. The device integrates a very accurate digital temperature sensor, which can be accessed through the I2C * interface (just like time). The accuracy of this temperature sensor is +/- 3 degree C. The on-chip control circuit can realize automatic power supply detection and manage the power supply switching between the main power supply and the backup power supply (that is, the low-voltage battery). If the main power supply is powered down, the device can continue to provide accurate timing and temperature without affecting performance. When the main power supply is re-energized or the voltage value returns to the allowable range, the on-chip reset function can be used to restart the system microprocessor.

Read more less

Product manual：1. Through-beam photoelectric switch (IRSW20B) is a customizable USB button.It is equivalent to a standard HID USB keyboard and mouse. The switch function can be customized to any key,combination, mouse or character string through the supporting software settings. After the definition is completed, no software is required during use.2. Products are widely used in printers, copiers, game consoles, factory inspections, instrument control, equipment, etc. as well as mobile monitoring, proximity switch monitoring and occasions where it is not convenient to use mechanical switches to improve efficiency.3. The switch adopts a through-beam photoelectric trigger mode. The infrared emitting tube in the device emits infrared light. If there is an object in the middle of the groove, the receiving sensor will trigger the corresponding key value if the infrared light is not detected.4. Provides button definition setting software based on Windows system. After setting, you can use it in the following systems: Dos, Win 2000, Win XP, Win vista, Win 7, Win 8, Win10, Linux, Mac, Android.5. Scope of application: office, game, industry, disabled personFunction Description：1. Keyboard function: It can be set to any key value or key combination, for example, to key value A or CTRL+A.2. Mouse function: It can be set to the left, middle, right, forward and backward keys of the mouse, the movement of the X and Y axes, and the up and down scrolling functions of the wheel.3. String printing: You can set up to 38 characters, for example, set "hello!".4. Multimedia function: It can be set as previous song, next song, volume up, volume down and other multimedia control functions.5. Gamepad function: It can be set as up, down, left and right four direction keys and 6 function keys.When you want to change the function of the button, you can use the FootSwitch software to modify the button function:1. Insert the device into the computer USB port2. Run the software FootSwitch3. Click to select the corresponding setting window4. Click or enter the function you want to set5. Click Save to confirm.6. The setting software only supports Windows system. The FootSwitch software is often upgraded. Please follow the latest version.Product specifications:1. Product model: IRSW20B2. Interface type: USB3. Power supply: 5V30mA4. USB cable length: 2 meters (the cable length can be customized)5. Product weight: about 65 gramsOutline dimension drawing and installation hole position drawing as show pictures

Read more less

Main Features: 1. Working current: DC 3.3V / 13 - 26mA 2. Idle current: DC 3.3V / 10 - 13mA 3. Sleep current: < 80uA 4. Peak current: < 30mA 5. Working frequency: 13.56MHz 6. Supports card: Mifare1 S50, mifare1 S70, mifare Ultralight, mifare Pro, mifare Desfare 7. Application: Various electronic products and DIY projects

Read more less

1. Easy and convenient to use 2. Mini size, convenient to carry 3. Type: Infrared Intelligent Car Obstacle Avoidance Sensor

Read more less

1. Type: Sensor Module 2. Easy and convenient to use 3. Mainly Compatible with: Ardunio

Read more less

1. Type: Reed Sensor Board 2. Material: PCB 3. Mainly Compatible with: Ardunio 4. Reed Sensor Board for Doors / Window Magnetics / Electromagnetic Relays / Electronic Weighing 5. Easy and convenient to use

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g

Read more less

Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g

Read more less

1. In resistance tester circuit, it is necessary to adjust the potentiometer to balance the resistance tester. Under the influence of temperature, humidity and vibration impact, the position and specifications of the potentiometer will be changed when being used, the system index is also changed. Therefore, to make the system back to the original state it needs to be adjusted, and digital potentiometer module can just solve this problem.2. The digital potentiometer changes in steps or incrementally, and the resistance is of linear change. For example, the resistance range of X9C104 is 40R~1000k, divided into 100 steps, so each increment is 1010R.3. With temperature compensation function: the resistance deviation between endpoints is +/-20%;4. Sliding end data can be kept for a long time, about 100 years;5. With 1% high resistance resolution;6. Working voltage: 5V;7. Total resistance: 100kΩ;8. End voltage: -5~5V;9. Tap number: 100;10. Interface: CS, U/D, INC;11. Resistance increase mode: Linear change;12. Working current: 3mA;13. Package temperature: 8SOIC/-40~85 C;14. Taps will automatically store data when being off.15. Package included: 1 x X9C104 Digital Potentiometer Module

Read more less

This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43ASpecification1. Double BTS7960 large current (43 A) H bridge driver;2. 5V isolate with MCU, and effectively protect MCU;3. 5V power indicator on board;4. Voltage indication of motor driver output end;5. Can solder heat sink;6. Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);7. Isolation chip 5 V power supply (can share with MCU 5 V);8. Able to reverse the motor forward, two PWM input frequency up to 25kHZ;9. Two heat flow passing through an error signal output;10. Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;11. The supply voltage 5.5V to 27V12. Size: 5.5 * 5 * 4 cm;13. Material: FR414. Other Features: A product for Arduino that works with official Arduino boards.15. Weight: 70g 16. Packing List: 1 * Stepper Motor Driver

Read more less

Features1. Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module2. Low-power dual-core 32-bit CPU for application processors3. Up to 240MHz, up to 600 DMIPS4. Built-in 520 KB SRAM, external 4M PSRAM5. Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC6. Support OV2640 and OV7670 cameras with built-in flash7. Support for images WiFI upload8. Support TF card9. Support multiple sleep modes10. Embedded Lwip and FreeRTOS11. Support STA/AP/STA+AP working mode12. Support Smart Config/AirKiss One-click distribution network13. Support for serial local upgrade and remote firmware upgrade (FOTA)14. The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleep current and a minimum of 6mA.15. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.16. ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.17. This product contains the OV2640 Camera Module.Specifications1. Material: FR42. Dimensions: 4 cm x 2.7cm x 0.5 cm3. Weight: 18g4. Module model: ESP32-CAM5. SPI Flash: Default 32Mbit6. RAM: internal520KB+external 4M PSRAM7. Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards8. Wi-Fi: 802.11 b/g/n/e/i9. Support interface: UART, SPI, I2C, PWM10. Support TF card: Maximum support 4G11. IO port: 912. Serial port rate: Default 115200 bps13. Image output format: JPEG (only supported by OV2640), BMP, GRAYSCALE14. Spectrum range: 2412 ~ 2484MHz15. Antenna form: Onboard PCB antenna , gain 2dBi16. Transmit power: 802.11b: 17+/-2 dBm (@11Mbps), 802.11g: 14+/-2 dBm (@54Mbps), 802.11n: 13+/-2 dBm (@MCS7)17. Receiving sensitivity: CCK, 1 Mbps : -90dBm, CK, 11 Mbps: -85dBm, 6 Mbps (1/2 BPSK): -88dBm, 54 Mbps (3/4 64-QAM): -70dBm, MCS7 (65 Mbps, 72.2 Mbps): -67dBm18. Power consumption: Turn off the flash: 180mA@5V19. Turn on the flash and adjust the brightness to the maximum: 310mA@5V20. Deep-sleep: The lowest power consumption can reach 6mA@5V21. Moderm-sleep: Up to 20mA@5V22. Light-sleep: Up to 6.7mA@5V23. Security: WPA/WPA2/WPA2-Enterprise/WPS24. Power supply range: 5V25. Operating temperature: -20 degree C ~ 85 degree C26. Storage environment: -40 degree C ~ 90 degree C, < 90%RH27. Package Included:- 1 x ESP32-CAM Module- 1 x Camera Module OV2640 2MPESP32-CAM Picture Output Format Rate: QQVGA QVGA VGA SVGAJPEG 6 7 7 8BMP 9 9 - -GRAYSCALE 9 8 - -Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi.

Read more less

Type:Voltage Regulator1. Packaging Electrostatic bag2. It use the same as official R3 board3. Use: Instrument4. Power supply voltage: 5v~9v5. Output voltage: 5V DC voltage output and 3.3V DC voltage output6. Plug in the development board, the driver will be installed automatically7. Select the board in die8. Select the COM port, this can be queried in my computer, just the port inside your development board9. It is best to choose the program that comes with it, PROGRAMMER it in.10. Added pin header, easy to use

Read more less

Type:Voltage Regulator1. Packaging Electrostatic bag2. It use the same as official R3 board3. Use: Instrument4. Power supply voltage: 5v~9v5. Output voltage: 5V DC voltage output and 3.3V DC voltage output6. Plug in the development board, the driver will be installed automatically7. Select the board in die8. Select the COM port, this can be queried in my computer, just the port inside your development board9. It is best to choose the program that comes with it, PROGRAMMER it in.10. Added pin header, easy to use

Read more less

Type:Voltage Regulator1. Packaging Electrostatic bag2. It use the same as official R3 board3. Use: Instrument4. Power supply voltage: 5v~9v5. Output voltage: 5V DC voltage output and 3.3V DC voltage output6. Plug in the development board, the driver will be installed automatically7. Select the board in die8. Select the COM port, this can be queried in my computer, just the port inside your development board9. It is best to choose the program that comes with it, PROGRAMMER it in.10. Added pin header, easy to use

Read more less

Electrical characteristics1. The maximum output current: 2 a2. The input voltage: 2 v ~ 24 v3. The maximum output voltage: 28 v4. Efficiency: ＞93%Mechanical propertiesProduct size: 36 mm X 17 mm X 14 mmMethod of useThe module of the IN+ and - after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltageMatters needing attention1. The input voltage should not exceed the maximum input voltage2. The peak current output current is no more than TV university

Read more less

Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.2- Focal Length: 1.88mm- Angle of View (diagonal): 120 degree- Distortion: <13.6%- Lens dimensions: 6.5mm x 6.5mm6. 4 screw holes7. Used for attachment8. Provide 3.3V power output9. Dimension: 25mm x 24mm10. Weight: 12gPacking List:1. IMX219-120 Camera x12. 15-pin FFC (opposite sides contact) x1

Read more less

1. Dimensions: 35x16.6x2.5 mm2. Upper limit working current: 3A3. Upper limit instantaneous current: 5A4. Overcharge voltage range: 4.28V +/- 0.05V5. Over discharge voltage range: 2.9V +/- 0.05V6. Quiescent current: less than 3uA7. Charging voltage: 8.4-9V8. Short circuit protection: protectable, delayed self-recovery9. Lithium battery protection board cannot be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack. Electric fish machine battery pack. Please pay attention to the electric bicycle battery pack, children's car battery, 550 or more power motor, 1W fisheye LED, etc., for the above combination purchase10. The described power range is applicable to the following products: massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack, monitoring backup power supply and other products.

Read more less

1. Power supply current: 0-20mA2. Power supply voltage: 0-10V3. Power supply voltage: 7-36V4. Packaging: Static Bag5. Features: Wide supply voltage range, support multiple ranges, high stability, good linearity, high-precision color ring resistance, high accuracy, low temperature drift, high power

Read more less

1. Working voltage: 5 ～ 12V2. Board size: 29 (mm) x12 (mm)3. Chip: NE555 chip on board4. Resistance: adjustable5. Packing: static bag

Read more less

1. Two sets of 3.3V and 5V DC output pins are on board, which is convenient for external use2. The upper and lower two channels are independently controlled, which can be switched to 0V, 3.3V, 5V3. Output current: Less than 700ma4. Output voltage: 3.3V, 5V can be switched5. Input voltage: 6.5-12V (DC) or USB power supply6. Dimensions: 32.2 x 52.8 x 20.7mm

Read more less

1. Using Bluetooth 5.0 master chip, JL6925A, true stereo 5.0 chip. Good sound quality 2. Support automatically back to connect function, support to decode WAV/APE/FLAC/MP3 files losslessly, support to output stereo. Specifications 1. Power Supply: 3.7-5V 2. SNR: 90dB 3. THD+N: -70dB 4. Crosstalk: -86dB 5. DNR: 91dB 6. Support Profile: A2DP/AVCTP/AVDTP/AVRCP/HFP 7. LOS: >15m Interfaces 1. USB powered: Micro USB 5V power supply 2. 3.7-5V Supply board: External 3.7-5V lithium battery power conversion 3. LED indicator: Bluetooth mode long blue light 4. 3.5mm stereo audio interface: Standard 3.5mm interface, output stereo sound source, plug in headphones, connect amplifiers and other devices Pair Instructions After the power is turned on, the blue indicator lights up and enters the Bluetooth mode; The English"The bluetooth device is ready to pair" is displayed, indicating that the Bluetooth mode is entered and waiting for pairing; The"JH_BT" searched by the mobile phone Bluetooth is the device name of the decoding board. Click on the connection, the decoder board prompts" The bluetooth device is connected successfully", indicating that the decoder board and the mobile phone are connected successfully, you can play music.

Read more less

1. Material: plastic, metal 2. Size: 3*3*2cm 3. Weight: 15g

Read more less

1. Type: Shield 2. Mainly Compatible with: Ardunio

Read more less

1. This is a cloud intelligent hardware development board kit, simple and cost-effective 2. Use EMC's witty cloud SDK to quickly realize the secondary development 3. The DEMO board can use mobile phone to control the panel mount of RGB colorful lights and display environment brightness by photosensitive resistance through APP of mobile phone 4. Only needs half an hour modification, you can create your own remote control device system.

Read more less

Features1. Using Bluetooth 5.0 main control chip, good transmission effect and high stability 2. With button control, there are control up and down music, volume addition and subtraction, playback, pause, switch machine, etc., and reserved high and low level control interfaces, regardless of daily use, and DIY modification, it is very playable 3. Micro 5 Pin interface power supply, ordinary mobile phone charger charging cable can be used. 4. Product use: Bluetooth audio signals from mobile phones, laptops, and tablets can be transmitted to power amplifiers, active speakers and other devices through this Bluetooth audio receiver. The audio interface can also be connected to ordinary headphones with a 3.5mm interface. The headset becomes a Bluetooth headset (without a microphone, voice chat is not supported)Specification1. Power interface: Micro 5 Pin (reserved 2.5mm welding port, this model does not support battery power supply) 2. Input voltage: 3.7V-5V 3. Signal-to-noise ratio: 90DB 4. THD+N: -70DB 5. Crosstalk: -86db 6. DNR: 91dB 7. Transmission protocol: A2DP/AVCTP/AVDTP/HFP 8. Transmission distance: about 10 meters (the shorter the distance, the better the stability) 9. Output interface: 3.5mm stereo (reserved soldering points, you can DIY by yourself) 10 Dimensions: 30mm x 30mm

Read more less

This board can be used with Arduino /Raspberry Pi boardModule itself can adapt 3.3V and 5V systems without level conversion.Features1. Within -40 degree C to +85 degree C temperature range, timing accuracy is maintained at +/- 5ppm (+/- 0.432 sec / day).2. Provide battery backup for continuous timing.3. Low-power.4. Device package and function compatible with the DS3231.5. Complete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100.6. Two calendar alarm.7. 1Hz and 32.768kHz output.8. Reset button and button input.9. High-speed (400kHz) I2C serial bus.10. +2.3 V to +5.5 V supply voltage.11. +/-3 degree C accuracy digital temperature sensor.12. -40 degree C to +85 degree C operating temperature range.13. 16-pin SO (300mil) packageSpecification1. Brand: Landa tianrui2. Model: LDTR-WG02113. Quantity: 1 piece4. Color: Black5. Material: PCB6. Chipset: DS32317. Dimensions: 2.2 cm x 1.2 cm x 0.5 cm8. Weight: 5g9. Package List: 1 x DS3231 Clock Module

Read more less

1. Concealed card holder, zero protrusion, integrated with Raspberry Pi development board, beautiful and convenient for experiment. 2. Let the Raspberry Pi development board have more extra storage space. 3. Secure backup, do not worry about data loss. 4. Read and write speed is fast. Specification: 1. Concealed. 2. Is the metal border: No. 3. Size: 24x16mm. 4. Applicable objects: Strawberry pie development board or other equipment (computer) with suitable SD card slot size. Please note: This ferrule is only suitable for devices that use the SD card slot connector, not for the TF card slot connector.

Read more less

1. 5MP night vision camera with 2 PCS IR sensor lights, support infrared night vision function. 2. Support 1080P resolution. 3. Focal adjustable, focal length: 3.6mm. 4. With 4 screw holes: The screw hole on the camera is used to both fix the infrared lights and though the power for the lights. You can use a small screwdriver to install the lights easily. 5. Support 3.3V power output.

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan. 5. The cooling fan helps to exhaust the hot air from inside the device case. Improve air flow in your system. Cool down the entire case. Extend your system life span and make the device work better.

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. Made of ABS material. 3. Has different ports and button position design. 4. It have many ventilation ports in side and covering, good heat dispersion. 5. Special design to install a cooling fan (Not included).

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan (Not included).

Read more less